betaFeedback

WorksPhysics and Astronomy

Screening strongly correlated materials in solid oxide cells with quantum simulation

Abstract

We develop an end-to-end framework for assessing a quantum-computing application in industrial materials science: the screening of strongly correlated oxygen-electrode materials for SOFCs and SOECs. We formulate the materials problem in terms of interface observables including oxygen-vacancy formation energies, vacancy migration barriers, and electronic conductivity. We describe how these observables can be obtained using a diagrammatic GW-based embedding, either GW+DMFT or self-energy embedding theory (SEET), applied to a DFT-screened shortlist. The atomistic electrode/electrolyte interface defines the electronic structure problem from which the correlated impurity models are constructed. Quantum impurity solvers would provide the finite-temperature impurity Green's functions required by the embedding. The computational challenges that classical solvers may encounter as the interacting active space grows, together with the polynomial scaling of quantum Hamiltonian simulation for efficiently represented discretized models, open an opportunity for quantum advantage. We identify the benchmarks needed to assess this opportunity through convergence of vacancy and migration energetics and comparison with the best applicable classical solvers. We provide illustrative logical qubit counts and identify the thermal state preparation, simulation, measurement, and repeated-solve costs needed for a complete resource assessment. We connect microscopic observables to macroscopic engineering metrics using a continuum model for mixed ionic–electronic conducting oxygen electrodes that couples oxygen surface exchange, solid-state oxygen transport, electrode microstructure, and finite electrode thickness. Finally, we estimate the potential worldwide business value of improved electrode materials under SOFC and SOEC deployment scenarios informed by public technical targets and electrolyser deployment data.

embedding [1]. The computational challenges that classical solvers may encounter as the interacting active space grows, together with the polynomial scaling of quantum Hamiltonian simulation for efficiently represented discretized models, open an opportunity for quantum advantage. We identify the benchmarks needed to assess this opportunity through convergence of vacancy and migration energetics and comparison with the best applicable classical solvers. We provide illustrative logical-qubit counts and identify the thermal-state preparation, simulation, measurement, and repeated-solve costs needed for a complete resource assessment. Third, we connect microscopic observables to macroscopic engineering metrics using a continuum model for mixed ionic–electronic conducting oxygen electrodes that couples oxygen surface exchange, solid-state oxygen transport, electrode microstructure, and finite electrode thickness. Finally, we estimate the potential worldwide business value of improved electrode materials under SOFC and SOEC deployment scenarios informed by public technical targets and electrolyser deployment data.

Our central contribution is an end-to-end description of the quantum computing application, produced by a chain of logic that flows from an industrial materials-screening problem to quantum-amenable impurity models, then onward to cell-level performance metrics and economic value. Due to the wide applicability of DMFT-based embedding for strongly correlated material simulations, our approach could be replicated to a range of material design use cases of similar potential economic value. This provides a tangible example of where and how quantum computers could play a role in future material design workflows.

Introduction

Solid oxide cells are among the most compelling electrochemical energy-conversion technologies because they can operate reversibly, reach high electrical efficiency, and integrate naturally with process heat, fuels, and industrial systems [2, 3]. In SOFC mode they convert chemical fuels into electricity with system efficiencies exceeding 60%, while in SOEC mode they can achieve high-temperature electrolysis (i.e. converting electricity in chemical fuels) with electricity consumption targets materially below low-temperature electrolysis [4, 5]. The operating principle of the SOFC, including the electrode half-reactions and electron flow through the external circuit, is illustrated in Figure 1. SOFCs are primarily used for stationary electricity generation, including distributed power for data centers, commercial and industrial facilities, microgrids, and combined heat-and-power systems, whereas SOECs are primarily used to convert electricity and steam into hydrogen or synthetic-fuel feedstocks and thereby supporting renewable-energy storage and industrial decarbonization [6, 7]. The central materials challenge is the oxygen electrode: the air-side electrode in SOFC operation and the oxygen-evolution electrode in SOEC operation. Lowering operating temperature from the traditional 800–1000°C range toward 500–700°C reduces balance-of-plant complexity and degradation, but it also increases polarization resistance and exposes difficult trade-offs among vacancy chemistry, transport, electronic conductivity, interface reactions, and thermo-mechanical compatibility [2, 8, 9].

Figure 1. Schematic of a SOFC running on air and a fuel that contains H2_2. At the cathode, O2+4e−→2O2−O_2 + 4e^- \rightarrow2O^{2-}; the O2−O^{2-} ions cross the solid ceramic electrolyte to the anode, where H2+O2−→H2O+2e−H_2 + O^{2-} \rightarrow H_2O + 2e^-. Since the electrolyte blocks electrons, they must flow through the external circuit, generating current; net reaction: 2H2+O2→2H2O2H_2 + O_2 \rightarrow2H_2O. Running it in reverse, i.e. applying an external voltage instead of drawing current, the same cell operates as a SOEC, splitting H2OH_2O back into H2H_2 and O2O_2.

Perovskite and related mixed ionic–electronic conducting oxides are natural candidates for oxygen electrodes because they can provide large oxygen-vacancy concentrations, fast surface exchange, and high electronic conductivity [2, 3]. However, the most relevant chemistries contain late transition metals such as Co, Fe, Mn, and Ni, whose local spin states and metal–oxygen covalency can change sharply with composition, oxygen stoichiometry, and local environment. More specifically, the computational challenge arising with strongly correlated materials is due to partially filled and spatially localized dd or ff shells that generate local Coulomb interactions that are comparable to the relevant one-electron energy scales. Electrons therefore cannot always be represented accurately as approximately independent particles: multiple local charge, orbital, and spin configurations can contribute at similar energies, and their relative importance can change with temperature, composition, oxidation state, strain, or defects. This physics occurs prominently in transition-metal compounds containing, for example Co, Fe, Mn, or Ni, 3d3d states and in rare-earth and actinide materials containing localized 4f4f or 5f5f states [10, 11]. These are precisely the regimes in which semilocal density functional theory (DFT) and even DFT+UU (i.e. with a static Hubbard correction) can become unreliable for total energies, charge states, and spectral quantities [10, 11, 12]. The problem is more severe at interfaces, because the electrolyte changes the local crystal field, hybridization, charge redistribution, and possible reaction pathways. In practice, a material that looks promising in bulk may fail once interfaced with electrolytes like yttria-stabilized zirconia (YSZ), gadolinium-doped ceria (GDC), samaria-doped ceria (SDC), or lanthanum strontium gallate magnesite (LSGM) due to altered vacancy energetics, reaction kinetics, interdiffusion, and thermal-expansion mismatch [2, 9, 13].

Going beyond DFT is necessary to describe the local, dynamical correlations of transition-metal dd electrons. the most widely used method combined DFT with Dynamical Mean field Theory (DMFT) captures these correlations, but its double-counting correction, the subtraction of interactions already included in DFT, is not uniquely defined. This choice can affect vacancy formation and migration energies, so a more accurate impurity solver alone may not improve the ranking of electrode candidates. GW+DMFT [14] and self-energy embedding theory (SEET) [15] instead define the overlap between their weakly and strongly correlated treatments diagrammatically. We propose to compare these approaches in a bulk pilot (§ 4.5). The screening workflow uses DFT to obtain geometries and assess all candidates, then applies GW-based embedding to a shortlist. Whether this changes candidate rankings remains an open question (§ 5.4).

The possible role of a quantum computer is to solve the correlated impurity problems within this embedding. DMFT maps the lattice problem onto self-consistent Anderson impurity models (AIMs) [10, 11]; Bauer et al. identified impurity solving as a natural quantum subroutine [1]. Realistic impurity models can involve off-diagonal hybridization, a full Coulomb interaction tensor and, in GW+DMFT, retarded interactions. These features can increase the cost of classical solvers, particularly as the interacting active space grows, opening an opportunity for quantum advantage (§ 2.4). Assessing this opportunity requires comparison with the best applicable classical solvers at the accuracy needed for the target observables. The classical GW calculation remains part of the total workload. Quantum resource requirements, including logical qubits, gate costs, and repeated impurity solves, are discussed in § 4.4 and § 7.2. The proposed quantum workflow targets fault-tolerant hardware.

The gap is not only algorithmic. A useful assessment must connect an industrial materials question to a screening workflow, identify the part a quantum computer could solve, and translate the calculated properties into engineering and business outcomes. This paper develops that connection for solid oxide cell oxygen electrodes, as illustrated in Figure 2. Our contributions are fourfold:

Figure 2. End-to-end workflow for quantum-enabled screening of strongly correlated oxygen-electrode materials. Candidate electrode/electrolyte interfaces are first constructed and treated with periodic DFT for all candidates (Tier T0). For the shortlist, a GW-based embedding (GW+DMFT or SEET) maps the strongly correlated local degrees of freedom onto Anderson impurity models (Tier T1), which constitute the quantum-computing subproblem. The resulting interacting Green’s functions and self-energies are embedded back into the lattice to calculate microscopic materials observables, including oxygen-vacancy formation energies, migration barriers, and electronic conductivity. These observables are propagated through an electrode microstructure model to engineering quantities such as area-specific resistance and durability, enabling candidate ranking and, ultimately, estimation of industrial value. Experimental validation, performed selectively on the highest-ranked candidates, can further refine the screening models, reducing reliance on the broader, more expensive experimental search.

  1. We define an oxygen-electrode screening problem using physically meaningful, interface-aware observables that are relevant to industrial decisions.

  1. We outline a screening workflow in which DFT assesses candidate materials and supplies geometries, while GW-based embedding evaluates a shortlist. We propose a bulk benchmark to compare GW+DMFT and SEET in a bulk pilot, identify the impurity problem that a quantum computer could solve, and discuss the additional work needed to extend the calculation to electrode/electrolyte interfaces.

  1. We connect the calculated materials properties to an electrode microstructure model for area-specific resistance (ASR).

  1. We estimate the worldwide business value of potential materials improvements in both SOEC and SOFC applications.

Related Work

Materials science of oxygen electrodes in solid oxide cells

The oxygen electrode remains the dominant loss and degradation locus in many SOFC and SOEC architectures, especially under intermediate-temperature operation. In solid oxide cells, oxygen-electrode materials must combine adequate electronic conductivity, oxide-ion transport, catalytic activity for oxygen reduction/evolution, chemical compatibility with the electrolyte, and thermal-mechanical compatibility [2, 9]. Lanthanum strontium cobalt ferrite (LSCF) and related perovskites exemplify the classical trade-off: they benefit from high oxygen-vacancy concentration and good conductivity, but can suffer from high thermal expansion, cation segregation, and interface instability depending on electrolyte choice [2, 3]. Interfacial nanocomposites and compositionally tuned interfaces have been shown to materially improve long-term stability, underscoring that the relevant screening problem is not purely about bulk materials [16].

DFT+DMFT for correlated materials and total energies

DFT+DMFT is a mature first-principles framework for strongly correlated materials. The core idea is to combine a one-electron (mean-field) Hamiltonian from DFT with a many-body treatment of local interactions in a correlated subspace, usually defined by DFT-derived localized orbitals or Wannier functions [10, 11]. Importantly for this work, DFT+DMFT is not only a spectral method; charge-self-consistent formalisms also enable calculation of total energies and hence defect energies, reaction energetics, and migration barriers [17]. The relevance of these methods to energy materials is underscored by DFT+DMFT studies of battery cathodes such as LixCoO2\mathrm{Li}_x\mathrm{CoO}_2, where phase stability and voltages can differ qualitatively from DFT+UU predictions [12]. For total-energy differences, the main remaining source of uncertainty is the DC correction, which is not uniquely defined: standard prescriptions shift the relative position of the transition-metal dd and oxygen pp states, and with it the energetics [18, 19]. A DC derived from the functional itself has been proposed [19]; its application to defect energetics in oxides is, to our knowledge, still open.

Beyond DFT+DMFT: diagrammatic embedding

Diagrammatic embeddings start from many-body perturbation theory instead of DFT. In GW+DMFT, the non-local GW self-energy is combined with the local DMFT self-energy, and the DC term is the local part of the GW self-energy, which is defined diagrammatically and has no free parameter [14]; it does, however, depend on the choice of local orbitals and projectors and on the level of self-consistency of the GW step, so the ambiguity is reduced, not eliminated. SEET follows the same logic, with a weak-coupling treatment of the whole system and a strong-coupling solution of one or more correlated active spaces; its results are systematically improvable as the active space grows [15], and it has been applied to periodic solids [20, 21].

The two options differ where the quantum solver enters. In GW+DMFT, the impurity interaction is the frequency-dependent screened interaction U(ω)U(\omega), and the double counting removes both the local GW self-energy and the local polarization [14]. A Hamiltonian-based impurity solver must then represent U(ω)U(\omega) with auxiliary bosonic modes coupled to the bare high-frequency interaction (§ 4.2), or reduce it to a static interaction with a renormalized bandwidth [22], which reintroduces an approximation. In SEET, the active space carries the bare static interaction, and the double counting removes the GW self-energy within the active space [15]. The two also improve along different routes. SEET enlarges the active space. GW+DMFT enlarges the impurity to several sites or a cluster. GW+DMFT is the more widely used of the two, mainly for spectral properties. We therefore treat both as options for Tier T1 and select between them with a bulk pilot (§ 4.5).

To our knowledge, total energies for large relaxed defect supercells of transition-metal oxides have not yet been demonstrated with these methods. Their classical cost has two parts: the GW step, and the impurity solver, whose requirements and limits are discussed in § 2.4.

Classical impurity solver

The quantum opportunity depends on both the size and the structure of the interacting active space. Realistic impurity models can involve off-diagonal hybridization Δ\Delta, a full Coulomb interaction tensor, and retarded interactions, each of which can increase the computational demands on classical solvers. The two Tier T1 options encounter different combinations of these features. SEET combines enlarged active spaces with the full bare Coulomb tensor and generally off-diagonal hybridization, which can cause a severe, basis-dependent sign problem in hybridization-expansion continuous-time quantum Monte Carlo (CT-HYB) [23]. GW+DMFT introduces a frequency-dependent screened interaction, whose treatment depends on the retained screening channels.

For the monopole screening model of Eq. (11), the retarded coupling acts through the total impurity charge N^I\hat{N}_I, which commutes with the local Hamiltonian even when static spin-flip and pair-hopping terms are retained. This permits a classical treatment of the retarded charge coupling, although the practical cost still depends on the size and structure of the remaining impurity problem. Calculations with density-density interactions have been demonstrated up to five orbitals [24]. More general retarded interactions, including dynamical exchange, require different treatments. Ref. [25] presents a two-orbital treatment in which spin-flip and pair-hopping terms are approximated as static.

Inchworm QMC provides an alternative for general interactions and hybridizations [26, 27]; the cited benchmarks concern two-orbital models, and the method retains exponential scaling with the number of interacting orbitals [26]. Exact diagonalization is limited by the combined impurity and bath Hilbert space, while truncated configuration-interaction and tensor-network methods require convergence checks for their respective approximations. Their practical performance for the target models at β≈12 eV−1\beta\approx12\ \mathrm{eV}^{-1} must therefore be established through comparison at the accuracy required for vacancy and migration energetics (§ 4.5). The computational challenges that arise as the required interacting active space grows open an opportunity for quantum advantage, to be assessed against the best applicable classical solvers using the total cost of obtaining converged target observables.

Electrode micro-modelling and technoeconomics

At the engineering layer, the appropriate electrode microstructure model depends on the electrode architecture. Two-phase composite electrodes in which electronic and ionic transport occur predominantly through distinct phases, for example Ni–YSZ fuel electrodes or conventional LSM–YSZ oxygen electrodes, are naturally described by porous composite-electrode models such as the Costamagna framework [28]. By contrast, perovskites such as LSCF are mixed ionic–electronic conductors (MIECs): oxygen incorporation can occur over the internal gas/MIEC surface and oxygen can subsequently diffuse through the MIEC bulk. The Adler–Lane–Steele (ALS) continuum framework was developed specifically for this class of porous MIEC oxygen electrode [29].

The ALS framework has subsequently been extended to composite MIEC/ionic-conductor electrodes and to increasingly detailed descriptions of electrode microstructure [30, 31]. A recent review by Panisset et al. places these models within the contemporary hierarchy of solid-oxide-cell oxygen-electrode modelling, ranging from homogenized continuum descriptions to reconstructed three-dimensional numerical models [32]. For the LSCF/GDC interface running example considered in the rest of the paper, we therefore use a finite-thickness MIEC continuum model within the ALS framework as the screening-level bridge between microscopic materials descriptors and electrode performance, while treating microstructure-resolved finite-element models as a higher-fidelity extension [33].

On the market side, public technoeconomic targets from Department of Energy (DOE) provide cost, efficiency, and durability reference points for SOFC and high-temperature electrolysis, while International Energy Agency (IEA) data provides the broader deployment context for electrolyser capacity growth [4, 5, 34, 35]. Our work combines these literatures into one end-to-end application architecture.

Materials-science formulation of the industrial problem

Use case and screening objective

We consider oxygen electrodes for SOFC and SOEC systems, with a focus on perovskite and related MIEC such as

La1−xSrxCoO3,La1−xSrxFeO3,La1−xSrxCo1−yFeyO3,\mathrm{La}_{1-x}\mathrm{Sr}_{x}\mathrm{CoO}_{3}, \quad\mathrm{La}_{1-x}\mathrm{Sr}_{x}\mathrm{FeO}_{3}, \quad\mathrm{La}_{1-x}\mathrm{Sr}_{x}\mathrm{Co}_{1-y}\mathrm{Fe}_{y}\mathrm{O}_{3},

where xx and yy denote the fractions of Sr substituted for La and Fe substituted for Co, respectively, and adjacent chemistries that may be preferable for durability, chromium tolerance, or thermal expansion. The industrial objective is to identify electrode/electrolyte pairs that maintain acceptable polarization resistance and durability at lower operating temperatures, ideally in the 500–700°C range for intermediate-temperature devices [2, 8, 9].

Interface observables

We consider three target observables that capture complementary aspects of oxygen-electrode performance. Oxygen vacancy formation energy EvacE_{\mathrm{vac}} measures how energetically favorable it is to create an empty oxygen site, which determines the equilibrium vacancy concentration available for oxygen-ion transport. Oxygen vacancy migration energy EmigE_{\mathrm{mig}} measures the barrier for an oxygen ion to move into a neighboring vacancy, and therefore controls the ionic conductivity of the electrode and its contribution to the overall polarization resistance. Electronic conductivity σe\sigma_e measures how efficiently electrons can move through the electrode to the reaction sites, enabling charge transfer during the oxygen reduction or evolution reaction. Together, they characterize vacancy availability, oxygen-ion mobility, and electronic transport: three key ingredients of a high-performance SOFC/SOEC oxygen electrode, for which low EvacE_{\mathrm{vac}} and EmigE_{\mathrm{mig}} (favoring high vacancy concentration and fast ionic transport) together with high σe\sigma_e (favoring low electronic resistance) are generally desirable. These observables in an interface can differ significantly from their bulk values, and so must be computed for the electrode/electrolyte interface, since interfacial effects can shift vacancy energetics, migration barriers, and conductivity from the bulk:

(EvacI,EmigI,σeI),\left(E_{\mathrm{vac}}^{\mathcal{I}}, E_{\mathrm{mig}}^{\mathcal{I}}, \sigma_e^{\mathcal{I}}\right),

where I\mathcal{I} denotes the dependence in the interface.

The interfacial oxygen-vacancy formation energy is

EvacI=EtotVO+μO(T,pO2)−Etot,(1)E_{\mathrm{vac}}^{\mathcal{I}} = E_{\mathrm{tot}}^{\mathrm{V_O}} + \mu_{\mathrm{O}}(T,p_{\mathrm{O}_2}) - E_{\mathrm{tot}}, \tag*{(1)}

where VO\mathrm{V_O} denotes an oxygen vacancy; EtotE_{\mathrm{tot}} and EtotVOE_{\mathrm{tot}}^{\mathrm{V_O}} are the total energies of the defect-free and vacancy-containing interface structures, respectively; and μO(T,pO2)\mu_{\mathrm{O}}(T,p_{\mathrm{O}_2}) is the chemical potential of the removed oxygen atom at temperature TT and oxygen partial pressure pO2p_{\mathrm{O}_2}, obtained from DFT calculation of an isolated oxygen molecule, supplemented by experimental thermochemical corrections [36].

The reference for μO\mu_{\mathrm{O}} must be consistent with the level of theory used for EtotE_{\mathrm{tot}} and EtotVOE_{\mathrm{tot}}^{\mathrm{V_O}}. If the solid is treated with a correlated embedding while the O2\mathrm{O}_2 reference comes from semilocal DFT, errors of the molecular reference, a known weakness of semilocal functionals [37], do not cancel in Eq. (1) and enter every vacancy energy as a common shift. The oxygen reference must therefore be computed at the same level as the solid, or calibrated against a measured oxidation enthalpy of a reference oxide, before absolute values of EvacE_{\mathrm{vac}} are compared with experiment. Energy differences between candidates, which are what the screen needs, are less sensitive to this shift.

The interfacial migration barrier is given by the energy difference between the transition state and the initial state along the migration pathway of an oxygen ion into a neighboring vacancy:

EmigI=ETS−EIS,(2)E_{\mathrm{mig}}^{I} = E_{\mathrm{TS}} - E_{\mathrm{IS}}, \tag*{(2)}

where EISE_{\mathrm{IS}} is the total energy of the interface structure with the oxygen ion in its initial lattice site, and ETSE_{\mathrm{TS}} is the total energy at the saddle point of the migration pathway, i.e. the highest-energy configuration the ion passes en route to the neighboring vacancy.

For electronic transport we target the interface conductivity given by:

σeI=JEI.(3)\sigma_{e}^{I} = \frac{J}{E^{I}}. \tag*{(3)}

where JIJ^{I} is the electronic current density through the interface and EIE^{I} is the applied electric field at the interface. In practice, σeI\sigma_{e}^{I} is evaluated from the Green’s functions via a Kubo-formula expression, rather than from an explicitly applied field.

These observables serve complementary roles. Together, EvacIE_{\mathrm{vac}}^{I}, EmigIE_{\mathrm{mig}}^{I}, and σeI\sigma_{e}^{I} determine transport and utilization. Computing these observables at the interface is important because a material can exhibit favorable vacancy formation, easy ion migration, and high conductivity as a bulk material, yet still fail through electrolyte reactivity or interface degradation [2, 13].

Computing interface observables via embedding and quantum-computable quantities

Total energies. The total energies entering the expressions for EvacIE_{\mathrm{vac}}^{I} and EmigIE_{\mathrm{mig}}^{I} are computed with the embedding as follows. We first write the familiar DFT+DMFT form, which serves as the reference, and then state what changes in Tier T1. Although these quantities describe oxygen-vacancy formation and ion migration, both are obtained from differences of electronic total energies evaluated for different atomic configurations. Because DMFT recomputes the one-electron energy using the interacting Green’s function, the corresponding DFT band-energy contribution must first be removed. The contribution already represented by DFT within the correlated orbitals must also be subtracted before adding the explicit local interaction energy, to avoid double counting. For a given atomic configuration XX,

EtotX=EDFT−Eband,DFT+Tr⁡[HKSGlatt]+⟨Hint⟩−Edc.(4)E_{\mathrm{tot}}^{X} = E_{\mathrm{DFT}} - E_{\mathrm{band,DFT}} + \operatorname{Tr}[H_{\mathrm{KS}}G_{\mathrm{latt}}] + \langle H_{\mathrm{int}} \rangle- E_{\mathrm{dc}}. \tag*{(4)}

Here, EDFTE_{\mathrm{DFT}} is the DFT total energy, Eband,DFTE_{\mathrm{band,DFT}} removes the corresponding band-energy contribution, HKSH_{\mathrm{KS}} is the Kohn–Sham Hamiltonian, and GlattG_{\mathrm{latt}} is the interacting lattice Green’s function. The trace includes the frequency sum and orbital, spin and wavevector indices. The terms ⟨Hint⟩\langle H_{\mathrm{int}} \rangle and EdcE_{\mathrm{dc}} account, respectively, for the explicit local interaction energy and the double-counting correction. All quantities are evaluated for configuration XX, with consistent charge-density bookkeeping.

Equation (4) is the DFT+DMFT form. In Tier T1, GW+DMFT and SEET derive from stationary embedding functionals evaluated with the self-consistent Green’s function. For an electronic Hamiltonian with an instantaneous bare Coulomb interaction, the total energy can be written schematically as

EtotX=Enn+Tr⁡[H0Glatt]+EH[ρ]+12Tr⁡[ΣxcGlatt],Σxc=ΣxcGW+Σimp,xc−ΣDC,xc.(5)E_{\mathrm{tot}}^{X} = E_{\mathrm{nn}} + \operatorname{Tr}[H_{0}G_{\mathrm{latt}}] + E_{\mathrm{H}}[\rho] + \frac{1}{2}\operatorname{Tr}[\Sigma_{\mathrm{xc}}G_{\mathrm{latt}}], \qquad\Sigma_{\mathrm{xc}} = \Sigma_{\mathrm{xc}}^{\mathrm{GW}} + \Sigma_{\mathrm{imp,xc}} - \Sigma_{\mathrm{DC,xc}}. \tag*{(5)}

Here, H0H_{0} contains the kinetic and external-potential terms, EnnE_{\mathrm{nn}} is the nuclear repulsion, and EHE_{\mathrm{H}} is the Hartree energy of the interacting density ρ\rho. The self-energy components exclude their Hartree contributions, and the impurity and double-counting terms are embedded into the lattice basis. The diagrammatic subtraction removes the GW contribution replaced by the impurity treatment (§ 2.3).

These expressions give the internal energy. At the operating temperature, thermodynamic stability instead depends on free-energy differences. For DFT+DMFT, the electronic free energy can be evaluated with a stationary functional [38]. The formal basis also exists for Tier T1: GW+DMFT uses a functional of the Green’s function and screened interaction [14, 39], while SEET derives from a Luttinger-Ward functional of the Green’s function [40]. Their practical evaluation for the interface models considered here remains to be demonstrated.

Written with diagrammatic double counting, the GW+DMFT interaction functional has the schematic structure

Ψ[G,W]=ΨGW[G,W]+Ψimp[Gloc,Wloc]−ΨlocGW[Gloc,Wloc],\Psi[G,W] = \Psi^{\mathrm{GW}}[G,W] + \Psi_{\mathrm{imp}}[G_{\mathrm{loc}},W_{\mathrm{loc}}] - \Psi_{\mathrm{loc}}^{\mathrm{GW}}[G_{\mathrm{loc}},W_{\mathrm{loc}}],

with a sum over impurity regions where appropriate. SEET follows an analogous diagrammatic replacement construction, but uses a Luttinger–Ward functional Φ[G]\Phi[G] in which the weak-coupling contribution within each active space is replaced by the corresponding strongly correlated contribution [14, 39, 40]. Stationarity requires that the electronic self-energy and, for GW+DMFT, the polarization be obtained consistently from the chosen functional and that the corresponding self-consistency conditions be satisfied. Finite baths and truncated boson spaces introduce representation errors, but do not necessarily destroy functional consistency. Sampling noise and incomplete self-consistency introduce additional numerical errors. The effect of these approximations on stationarity and on the target free-energy differences must therefore be assessed. A prerequisite for the Tier T1 thermodynamic calculations is to evaluate the embedding free energy consistently with the chosen numerical approximations.

The entropy has electronic, vibrational and configurational contributions, obtained from the embedding, classical phonon calculations and the defect-chemistry model of § 5.2, respectively.

The electronic contribution does not require a direct entropy measurement. At the converged hybridization function, the impurity grand potential follows from the impurity partition function, normalized by that of the uncoupled bath. Classical polynomial-time guarantees for this quantity assume a constant-size impurity coupled to a purely fermionic bath [41, 42]; they do not establish efficiency as the active space grows. For a static interaction, the impurity free-energy contribution can alternatively be obtained by coupling-constant integration of ⟨Hint⟩\langle H_{\mathrm{int}}\rangle, starting from the known non-interacting reference while keeping the converged bath fixed. This is one ingredient of the embedding free energy, whose remaining terms are evaluated classically. Each integration point requires thermal-state preparation, so this route avoids real-time evolution but not the cost CGibbsC_{\mathrm{Gibbs}} of § 4.4. The integration must be converged to the required accuracy.

Stationarity suppresses first-order errors from consistent variations of the functional’s arguments around a self-consistent solution. This property is established for the stationary DFT+DMFT functional tional [38] and requires a consistent, functional-derived formulation in Tier T1. It does not eliminate direct errors in the estimated impurity free energy or other functional terms. Electronic entropy can be important at solid-oxide-cell temperatures, particularly when different atomic configurations favour different local spin states. We retain EvacE_{\mathrm{vac}} and EmigE_{\mathrm{mig}} for energy differences and write ΔGvac\Delta G_{\mathrm{vac}} for the vacancy formation free energy, including the appropriate chemical reservoir (§ 5.2).

We evaluate the energies separately for the four atomic configurations needed above: the pristine interface, the vacancy-containing interface, and the initial- and transition-state configurations of the migrating oxygen ion. The resulting energies, EtotE_{\mathrm{tot}}, EtotVOE_{\mathrm{tot}}^{\mathrm{VO}}, EISE_{\mathrm{IS}}, and ETSE_{\mathrm{TS}}, enter Eqs. (1) and (2).

The interacting one-electron contribution can be written

Tr⁡[HKSGlatt]=−1π∑kwk∫dω f(ω)Im⁡Tr⁡[HKS(k)Glatt(k,ω+i0+)](6)\operatorname{Tr}[H_{\mathrm{KS}}G_{\mathrm{latt}}] = -\frac{1}{\pi}\sum_{k} w_k \int d\omega\, f(\omega)\operatorname{Im}\operatorname{Tr}[H_{\mathrm{KS}}(k)G_{\mathrm{latt}}(k,\omega+i0^{+})] \tag*{(6)}

where wkw_k are the Brillouin-zone integration weights, f(ω)f(\omega) is the Fermi–Dirac distribution, and ω\omega has units of energy with ℏ=1\hbar= 1. In Tier T1, the corresponding one-electron term uses H0H_0.

For a static local interaction, the interaction energy can be obtained from the Galitskii–Migdal expression:

⟨Hint⟩=−12π∑I∫dω f(ω)Im⁡Tr⁡[Σimp,I(ω+i0+)Gloc,I(ω+i0+)](7)\langle H_{\mathrm{int}}\rangle= -\frac{1}{2\pi}\sum_I \int d\omega\, f(\omega)\operatorname{Im}\operatorname{Tr}[\Sigma_{\mathrm{imp},I}(\omega+i0^{+})G_{\mathrm{loc},I}(\omega+i0^{+})] \tag*{(7)}

Here, Σimp,I\Sigma_{\mathrm{imp},I} is the interaction self-energy, including its Hartree contribution, and Gloc,IG_{\mathrm{loc},I} is the lattice Green’s function projected onto the correlated subspace at site II. At self-consistency, it equals the impurity Green’s function. For SEET, or GW+DMFT with a static reduction of the screened interaction, this expression gives the impurity interaction energy. The impurity interaction energy can also be measured directly as the static thermal expectation value Tr⁡[ρβHint]\operatorname{Tr}[\rho_\beta H_{\mathrm{int}}], avoiding the frequency integral and its high-frequency tail. For dynamical screening represented by Eq. (11), the corresponding energy estimator must be derived consistently from the electron–boson embedding formulation.

The quantum impurity solver provides GimpG_{\mathrm{imp}}, from which the impurity self-energy is extracted and embedded into the lattice calculation. The lattice Green’s function is then updated through the self-consistency loop until Gimp≃GlocG_{\mathrm{imp}} \simeq G_{\mathrm{loc}}. GW+DMFT additionally requires bosonic self-consistency for the screened interaction. A more detailed breakdown is provided in § 4.

Vacancy energetics as a function of δ\delta. The thermodynamic factor used in § 5.2 depends on how EvacE_{\mathrm{vac}} changes with the vacancy concentration. In LSCF the thermodynamic factor is large, and it is set by the δ\delta dependence of μO\mu_{\mathrm{O}}, which is controlled by the hole states in the Co/Fe–O bands, that is, by correlation. The embedding must therefore deliver EvacE_{\mathrm{vac}} at several vacancy concentrations (supercells with one, two and three vacancies), and hence μO(δ)\mu_{\mathrm{O}}(\delta). This requirement is also an opportunity: δ(T,pO2)\delta(T,p_{\mathrm{O}_2}), and therefore μO(δ)\mu_{\mathrm{O}}(\delta), is measured by thermogravimetry and coulometric titration [43, 44], which gives a direct experimental benchmark for the embedding at each active-space size.

Electronic conductivity. We can derive the electronic conductivity in the interface region from the interacting spectral function:

A(k,ω)=−1πIm⁡[ω+μ−HKS(k)−Σlatt(ω)]−1,(8)A(\mathbf{k},\omega)=-\frac{1}{\pi}\operatorname{Im}\left[\omega+\mu-H_{\mathrm{KS}}(\mathbf{k})-\Sigma_{\mathrm{latt}}(\omega)\right]^{-1}, \tag*{(8)}

where μ\mu is the electronic chemical potential. In Tier T1, HKS(k)+Σlatt(ω)H_{\mathrm{KS}}(\mathbf{k})+\Sigma_{\mathrm{latt}}(\omega) is replaced by H0(k)+ΣH+ΣxcGW(k,ω)+Σimp,xc(ω)−ΣDC,xc(ω)H_0(\mathbf{k})+\Sigma_{\mathrm{H}}+\Sigma_{\mathrm{xc}}^{\mathrm{GW}}(\mathbf{k},\omega)+\Sigma_{\mathrm{imp,xc}}(\omega)-\Sigma_{\mathrm{DC,xc}}(\omega), with the impurity matrices embedded into the lattice basis.

A Kubo-form conductivity estimate may then be written schematically as

σeI∝∫dω(−∂f∂ω)∑kvk2A(k,ω)2.(9)\sigma_{\mathrm{e}}^{\mathsf{I}}\propto\int d\omega\left(-\frac{\partial f}{\partial\omega}\right)\sum_{\mathbf{k}}v_{\mathbf{k}}^2A(\mathbf{k},\omega)^2. \tag*{(9)}

Here, vkv_{\mathbf{k}} is the band velocity and −∂f/∂ω-\partial f/\partial\omega restricts the dominant contribution to states near the Fermi level. The spectral function enters squared because the Kubo-bubble conductivity is built from a current-current correlation function containing two Green’s function propagators, each of which contributes a factor of A(k,ω)∼Im⁡Glatt(k,ω)A(\mathbf{k},\omega)\sim\operatorname{Im}G_{\mathrm{latt}}(\mathbf{k},\omega). For several orbitals, vk2A2v_{\mathbf{k}}^2A^2 stands for Tr⁡[vkA(k,ω)vkA(k,ω)]\operatorname{Tr}[v_{\mathbf{k}}A(\mathbf{k},\omega)v_{\mathbf{k}}A(\mathbf{k},\omega)], with vkv_{\mathbf{k}} the velocity matrices, and vertex corrections and polaronic contributions are neglected. The conductivity checks whether the electrode satisfies the electronic-transport requirement of § 5.2.

Additional material-screening criteria

This paper focuses on articulating a use case of quantum computing to improve materials screening based on more accurate computations of these interface observables, and in subsequent sections, we will see how these microscopic observables connect to an important macroscopic property of the electrode: the area-specific resistance (ASR). However, it is worth noting that, while improving the accuracy of the ASR screen is very valuable, candidates passing the ASR screen must still be evaluated against a broader set of requirements, including thermal-expansion compatibility with the electrolyte and neighboring stack components; chemical and phase stability under the relevant temperature and oxygen chemical potential; interfacial reactivity and interdiffusion; mechanical integrity, fracture and delamination resistance; redox and thermal-cycling stability; cation segregation and long-term microstructural evolution; chromium and other contaminant tolerance; catalytic stability under both SOFC and SOEC operation; gas-transport limitations in the realized porous electrode; electronic and ionic percolation after processing and ageing; sinterability and compatibility with the fabrication route; and material abundance, cost, toxicity, and supply-chain constraints [9]. Thus, the quantum-enabled ASR model presented in this paper should be interpreted as a high-value screening layer within a multi-criteria materials qualification process rather than as a complete electrode digital twin.

We note that phase stability is itself a potential extension of the quantum-enabled GW+DMFT workflow when the competing phases contain strongly correlated electronic states. One can compute correlated free energies for the candidate material and for competing crystal structures, and possible reaction or decomposition products using GW+DMFT. Comparing these energies as a function of composition, temperature, oxygen chemical potential, and strain then indicates which phase is thermodynamically favored under given operating conditions [12, 17].

Choice of system and motivation for correlated embedding

We use the LSCF/GDC interface as the running example because the literature covers both the electrode composition and the interface. The composition La0.6Sr0.4Co0.2Fe0.8O3−δ\mathrm{La}_{0.6}\mathrm{Sr}_{0.4}\mathrm{Co}_{0.2}\mathrm{Fe}_{0.8}\mathrm{O}_{3-\delta} is the one studied by Asakura et al. [45]. LSCF/GDC interfaces have been observed to show interdiffusion, oxygen-vacancy ordering, interfacial strain, and changes in transition-metal valence and spin state [45, 46, 47], and Lee et al. [47] report the orientation relationship adopted in § 4. The measured bulk oxygen non-stoichiometry of LSCF [44] provides a first experimental benchmark (§ 3.2.1).

Vacancy energetics in these perovskites are usually computed with DFT or DFT+UU, and the results depend strongly on the structural model, the magnetic order, and the Hubbard correction. For La1−xSrxCo0.25Fe0.75O3−δ\mathrm{La}_{1-x}\mathrm{Sr}_{x}\mathrm{Co}_{0.25}\mathrm{Fe}_{0.75}\mathrm{O}_{3-\delta}, Gryaznov et al. [48] find spreads of up to about 1.7 eV relative to thermogravimetric data, and for transition-metal-doped La0.5Sr0.5CoO3\mathrm{La}_{0.5}\mathrm{Sr}_{0.5}\mathrm{CoO}_{3}, Wei et al. [49] find differences of 0.3–0.6 eV between ferromagnetic and paramagnetic states. These studies do not isolate the contribution of electronic correlation, and we do not read them as evidence for it; they show only that DFT-level vacancy energies are sensitive to modeling choices. We therefore treat correlated embedding as a motivated hypothesis for this system, not as a demonstrated necessity. Correlation can enter the electrode metrics through three channels, each already present in the workflow.

Thermodynamic factor. The thermodynamic factor γO\gamma_{\mathrm{O}} is set by the δ\delta dependence of μO\mu_{\mathrm{O}}, which the hole states in the Co/Fe–O bands control (§ 3.2.1). Together with EvacE_{\mathrm{vac}}, γO\gamma_{\mathrm{O}} determines the chemical diffusion coefficient and therefore the ASR (§ 5.2). Augustinský et al. [50] report that correlation effects in LaCoO3\mathrm{LaCoO}_{3} grow with Sr doping, that is, with the hole doping that sets γO\gamma_{\mathrm{O}}.

Double counting. Standard double-counting prescriptions shift the relative position of the transition-metal dd and O 2p2p states, and with it the energetics [18, 19]. This spread is intrinsic to the method and may be large enough to change a candidate ranking (§ 5.4). The evidence of Dang et al. [18] concerns titanates and vanadates, so its transfer to cobaltite–ferrites is an analogy, not a result. Tier T1 removes the free parameter of the double counting (§ 2.3), which is the main motivation for using it; residual dependence on projectors, active space and the GW starting point remains. Whether the residual spread is smaller than the double-counting spread is a hypothesis. It can be tested on bulk LSCF, alongside the bulk benchmark of § 4.5, by comparing the spread of the Tier T1 results over projector and GW-starting-point choices with the spread of DFT+DMFT over standard double-counting prescriptions.

Spin-state entropy. At operating temperature, changes in the Co spin state contribute an entropy term that zero-temperature DFT+UU does not capture. Our estimate of this term is 60–90 meV, and Chakrabarti et al. [51] report about 110 meV per formula unit in LaCoO3\mathrm{LaCoO}_{3}. Because the term enters the exponent of the vacancy concentration, it changes cvacc_{\mathrm{vac}} by a factor of exp⁡(ΔE/kBT)≈2\exp(\Delta E/k_{\mathrm{B}}T) \approx2–3 for ΔE=60\Delta E = 60–90 meV at 973 K.

Limitations. Three limitations qualify this motivation. First, Co occupies only 20% of the BB sites in our example, whereas most of the evidence above concerns Co-rich systems. Second, DMFT does not address structural and sampling errors, which reach about 1 eV from the choice of supercell alone [48]. Third, whether classical impurity solvers actually limit the calculation at the required active-space size remains open; the comparison with the best classical impurity solvers (§ 4.5) is designed to test it.

From candidate materials to a quantum impurity Hamiltonian

This section defines the classical translation procedure that converts a candidate electrode/electrolyte interface into the Anderson impurity Hamiltonians, one per correlated site and per atomic configuration, required by a quantum impurity solver. The sequence is

electrode and electrolyte crystals ↓ atomistic interface geometry ↓ periodic DFT calculation ↓ (Tier T1) GW calculation: ΣGW(k,ω)\Sigma^{\mathrm{GW}}(\mathbf{k},\omega), W(ω)W(\omega) ↓ localized lattice Hamiltonian ↓ correlated local subspace ↓ DMFT hybridization function ↓ finite Anderson impurity Hamiltonian.

DFT treats the full periodic interface supercell. The embedding subsequently selects local correlated orbitals from this DFT-derived lattice model. Each impurity solver remains local: the effect of the surrounding electrode, electrolyte, vacancies, and interface is encoded in that site’s local one-electron Hamiltonian and hybridization function. Because the interface breaks the symmetry that would otherwise make correlated sites equivalent, multiple, symmetry-inequivalent sites each require their own impurity solver.

Construction of the atomistic interface

For each electrode/electrolyte pair, experimentally known parent crystal structures are expanded into compositionally appropriate supercells, dopants and oxygen vacancies are assigned to explicit sites, and candidate interfaces are generated by enumerating crystallographic orientation, termination, lateral registry, and low-strain commensurate surface cells. Each candidate is subsequently relaxed with periodic DFT and ranked by interface energy, with lower values indicating more energetically favorable interfaces. Full crystallographic coordinates and construction details are provided in Appendix § 9.1.

For the running LSCF/GDC example, we use

La0.6Sr0.4Co0.2Fe0.8O3−δ ∣ Ce0.9Gd0.1O1.95\mathrm{La}_{0.6}\mathrm{Sr}_{0.4}\mathrm{Co}_{0.2}\mathrm{Fe}_{0.8}\mathrm{O}_{3-\delta}\ |\ \mathrm{Ce}_{0.9}\mathrm{Gd}_{0.1}\mathrm{O}_{1.95}

(i.e. x=0.4x = 0.4, y=0.8y = 0.8 in our general LSCF formula above), where δ\delta denotes the oxygen nonstoichiometry, with the experimentally motivated

(001)LSCF,pc∥(001)GDC,c,[100]LSCF,pc∥[110]GDC,c(001)_{\mathrm{LSCF,pc}} \parallel(001)_{\mathrm{GDC,c}}, \qquad[100]_{\mathrm{LSCF,pc}} \parallel[110]_{\mathrm{GDC,c}}

orientation [47], where (hkl)(hkl) and [uvw][uvw] denote crystallographic planes and directions, respectively, specifying which faces of the two materials are joined and their relative in-plane rotational alignment, and pc and c denote the pseudocubic perovskite and cubic fluorite settings of LSCF and GDC, respectively. Candidate structures spanning different terminations, cation arrangements, oxygen-vacancy positions, and lateral registries are then relaxed and compared by interface energy, as described above, before the correlated electronic-structure calculation.

From the atomistic interface to the quantum impurity problem

The purpose of the classical embedding preprocessing is to translate a candidate electrode/electrolyte interface into a set of local many-body problems that can be solved on a quantum computer. The detailed crystallographic construction and the vacancy and migration geometries are given in Appendices AA and BB. The remaining DMFT equations are standard [10, 52] and are implemented in codes such as TRIQS/DFTTools [53]. In the GW-based embedding of Tier T1 (§ 4.5), a GW calculation supplies the non-local self-energy and the double counting is the local part of the GW self-energy (§ 2.3). GW+DMFT also subtracts the local polarization and passes U(ω)U(\omega) to the impurity, while SEET uses the bare interaction within the active space. Here we articulate the resulting computational objects and the division of labor between the classical and quantum parts of the workflow.

For each candidate electrode/electrolyte pair, a relaxed, screened atomistic interface supercell provides the starting point for the correlated electronic-structure calculation. Oxygen vacancy formation requires calculations for both the pristine and vacancy-containing structures, while vacancy migration additionally requires initial- and transition-state geometries, with the transition state obtained from a nudged-elastic-band (NEB) calculation [54].

Periodic DFT provides the Kohn–Sham Hamiltonian HKSH_{\mathrm{KS}} for every retained atomic geometry; its matrix elements in a localized Wannier/projected-orbital basis define the one-electron lattice Hamiltonian H0(k)H^0(\mathbf{k}) [53, 55], from which a subset of strongly correlated, symmetry-inequivalent sites II is selected for explicit many-body treatment (for LSCF/GDC: the Fe and Co 3d3d shells, and Ce 4f4f where relevant). Because the choice of localized orbitals can change DFT+DMFT results quantitatively [56], the localized model is accepted only if it reproduces the DFT bands and orbital characters over the energy window used. Each site contributes a local one-electron Hamiltonian hIh_I and screened interaction parameters UI,JIU_I, J_I that parameterize HintIH_{\mathrm{int}}^I, computed for example with the constrained random-phase approximation [57] (reference DFT+DMFT form). In Tier T1, the interaction is UI(ω)U_I(\omega) derived from the GW screened interaction in GW+DMFT, or the bare interaction within the active space in SEET. Summed over all sites, these define the formal interacting lattice Hamiltonian underlying DMFT, analogous to Eq. (4) but resolved per site, not solved directly as a full many-body matrix.

DMFT instead maps each correlated site II onto an Anderson impurity model [10, 52]. The remainder of the lattice enters that local problem through the frequency-dependent hybridization function ΔI(z)\Delta_I(z), where zz is a general complex frequency, discretized into a finite bath (energies {ϵℓI}\{\epsilon_\ell^I\}, couplings {VmℓI}\{V^{I}_{m\ell}\} that, together with hIh_I, UIU_I, and JIJ_I (for GW+DMFT, the bare interaction plus the bosons of Eq. (11)), defines the finite Anderson impurity Hamiltonian HAIM,IH_{\mathrm{AIM},I},

HAIM,I=∑mm′σ(hI)mm′dImσ†dIm′σ+∑ℓσϵℓIbIℓσ†bIℓσ+∑mℓσ(VmℓIdImσ†bIℓσ+h.c.)⏟Hquad,I+HintI,(10)H_{\mathrm{AIM},I} = \underbrace{\sum_{mm'\sigma}(h_I)_{mm'}d^{\dagger}_{Im\sigma}d_{Im'\sigma} +\sum_{\ell\sigma}\epsilon^{I}_{\ell}b^{\dagger}_{I\ell\sigma}b_{I\ell\sigma} +\sum_{m\ell\sigma}\left(V^{I}_{m\ell}d^{\dagger}_{Im\sigma}b_{I\ell\sigma}+\mathrm{h.c.}\right)}_{H_{\mathrm{quad},I}} +H^{I}_{\mathrm{int}}, \tag*{(10)}

where dImσd_{Im\sigma} and bIℓσb_{I\ell\sigma} annihilate an electron with spin σ\sigma in impurity orbital mm and bath orbital ℓ\ell, respectively. For GW+DMFT with dynamical screening, HAIM,IH_{\mathrm{AIM},I} acquires auxiliary bosonic modes,

Hbos,I=∑νωνaν†aν+∑νgν(aν+aν†)(N^I−N0),(11)H_{\mathrm{bos},I}=\sum_{\nu}\omega_{\nu}a^{\dagger}_{\nu}a_{\nu}+\sum_{\nu}g_{\nu}\left(a_{\nu}+a^{\dagger}_{\nu}\right)\left(\hat{N}_{I}-N_{0}\right), \tag*{(11)}

whose parameters {ων,gν}\{\omega_{\nu},g_{\nu}\} reproduce the frequency dependence of UI(ω)U_I(\omega) (density-density screening). This captures the uniform (monopole) part of the screening only. JJ is taken as static, from the cRPA value J(0)J(0), and both J(ω)J(\omega) and the orbital dependence of U(ω)U(\omega) are neglected. A classical check bounds the effect of this choice: compute the cRPA J(ω)J(\omega) for LSCF, and the sensitivity of the Co spin-state energy difference to J±20%J \pm20\%. In this case, HintIH^{I}_{\mathrm{int}} carries the high-frequency limit UI(ω→∞)U_I(\omega\to\infty), the bare Coulomb interaction of the correlated orbitals, and the bosons screen it to UI(0)=UI(∞)−∑ν2gν2/ωνU_I(0)=U_I(\infty)-\sum_{\nu}2g_{\nu}^{2}/\omega_{\nu} at low frequency [58]. Putting the screened interaction in HintIH^{I}_{\mathrm{int}} would screen twice. We couple the bosons to N^I−N0\hat{N}_{I}-N_{0}, with N0N_{0} the mean impurity filling, so that the modes are displaced only by charge fluctuations and the boson truncation stays small. The difference is a one-body term absorbed into μ\mu.

SEET uses Eq. (10) with the bare interaction and no bosons. GW+DMFT with a static reduction of U(ω)U(\omega) uses it with the screened static value and a renormalized bandwidth.

The number of bath orbitals NbathN_{\mathrm{bath}} is increased until the target observables converge. The discretization is a nonlinear fit of ΔI\Delta_I on the Matsubara axis at the operating temperature. The fit has many near-degenerate local minima and the fitted bath changes between iterations, so the observables need not converge monotonically with NbathN_{\mathrm{bath}}. The convergence of EvacE_{\mathrm{vac}} and EmigE_{\mathrm{mig}} with NbathN_{\mathrm{bath}} must therefore be reported explicitly, since bath discretization error enters the total energies directly and does not cancel between configurations that have different hybridization functions.

This is the point at which the quantum computer enters the workflow. Rather than simulating the complete electrode/electrolyte supercell, the quantum processor solves each local interacting Hamiltonian HAIM,IH_{\mathrm{AIM},I} and returns the corresponding finite-temperature impurity Green’s function Gimp,I(z)G_{\mathrm{imp},I}(z) (§ 4.3). Via Dyson’s equation, Gimp,I(z)G_{\mathrm{imp},I}(z) yields the local self-energy ΣI(z)\Sigma_I(z), the central many-body correction, local but frequency-dependent, which is embedded back into the lattice and iterated to DMFT self-consistency, Gimp,I(z)≃Gloc,I(z)G_{\mathrm{imp},I}(z)\simeq G_{\mathrm{loc},I}(z) (in fully self-consistent GW+DMFT, also Wimp,I≃Wloc,IW_{\mathrm{imp},I}\simeq W_{\mathrm{loc},I}).

At convergence, the calculation therefore provides, for every inequivalent correlated site,

{Gimp,I(z),ΣI(z),ΔI(z)},\{G_{\mathrm{imp},I}(z),\Sigma_I(z),\Delta_I(z)\},

which are the local correlated quantities required to reconstruct the interacting electronic structure of the full interface.

These local self-energies are embedded into the full Wannier lattice basis to reconstruct the interacting lattice self-energy Σlatt(k,z)\Sigma_{\mathrm{latt}}(\mathbf{k},z) and Green’s function Glatt(k,z)G_{\mathrm{latt}}(\mathbf{k},z) [10], which are then used to compute EvacIE_{\mathrm{vac}}^{I}, EmigIE_{\mathrm{mig}}^{I}, and σeI\sigma_{\mathrm{e}}^{I} as described in § 3.2.1 above.

The quantum impurity solver

At each DMFT iteration, the quantum computer receives HAIM,IH_{\mathrm{AIM},I} and returns its finite-temperature Green’s function. The impurity and bath spin orbitals are first mapped to qubits (§ 4.4). The solve then has three steps: thermal-state preparation, real-time evolution, and measurement of the particle and hole correlation functions.

Thermal-state preparation. Because the cell operates at finite temperature, the target is the thermal state of the impurity model rather than only its ground state:

ρβ=e−β(HAIM,I−μN^)Z,Z=Tr⁡e−β(HAIM,I−μN^),β=1kBT,(12)\rho_{\beta} = \frac{e^{-\beta(H_{\mathrm{AIM},I}-\mu\hat{N})}}{Z}, \qquad Z = \operatorname{Tr} e^{-\beta(H_{\mathrm{AIM},I}-\mu\hat{N})}, \qquad\beta= \frac{1}{k_{\mathrm{B}}T}, \tag*{(12)}

where N^\hat{N} is the electron-number operator and μ\mu the electronic chemical potential. The target is ρβ\rho_{\beta} of Eq. (12) at β≈12 eV−1\beta\approx12\ \mathrm{eV}^{-1}. Fault-tolerant routes include Gibbs samplers built from quantum Markov chains that satisfy detailed balance, whose cost is set by the mixing time [59]. The quadratic part Hquad,IH_{\mathrm{quad},I} is diagonalized classically, so its Gibbs state, a fermionic Gaussian state, can be prepared exactly and used to start the chain. If bosonic modes are present, their free thermal state is included in this reference. CGibbsC_{\mathrm{Gibbs}} enters every sample (§ 4.4). For a constant-size impurity coupled to a purely fermionic bath, Jiang et al. give a quantum algorithm that prepares the thermal state [41], in contrast to most Gibbs samplers, whose runtime bounds are exponential or worse in the inverse temperature. The runtime is polynomial in the system size, the inverse temperature, the bath energy scale and the inverse precision only for a constant impurity size: the runtime depends exponentially on the number of impurity modes, so the guarantee does not establish efficiency for enlarged active spaces, and it does not cover bosonic modes. For the enlarged active spaces and the bosonic modes of Tier T1, the thermal-state cost, through the mixing time or an equivalent bound, remains open (§ 7.2). Quantum imaginary-time evolution [60] is a near-term heuristic and gives no fault-tolerant cost guarantee.

Real-time evolution and measurement. From the thermal state, the quantum computer applies the controlled Majorana operators of an interferometric circuit, evolves under HAIM,IH_{\mathrm{AIM},I}, and measures the ancilla to obtain the correlation functions

Gmm′>(t)=−iTr⁡[ρβdm(t)dm′†],Gmm′<(t)=iTr⁡[ρβdm′†dm(t)],dm(t)=eiHAIM,Itdme−iHAIM,It.(13)G^{>}_{mm'}(t) = -i\operatorname{Tr}\left[\rho_{\beta}d_m(t)d_{m'}^{\dagger}\right], \qquad G^{<}_{mm'}(t) = i\operatorname{Tr}\left[\rho_{\beta}d_{m'}^{\dagger}d_m(t)\right], \qquad d_m(t) = e^{iH_{\mathrm{AIM},I}t}d_m e^{-iH_{\mathrm{AIM},I}t}. \tag*{(13)}

These correlators give the retarded Green’s function, GR(t)=θ(t)[G>(t)−G<(t)]G^{R}(t) = \theta(t)\left[G^{>}(t)-G^{<}(t)\right], and by Fourier transformation the spectral function AI(ω)A_I(\omega) on the real-frequency axis. Because dmd_m is not unitary, the correlators are measured through the unitary Majorana combinations dm+dm†d_m+d_m^{\dagger} and i(dm−dm†)i(d_m-d_m^{\dagger}) with an interferometric (Hadamard-test) circuit, as in an early quantum-DMFT proposal [1]. For GW+DMFT with the monopole screening of Eq. (11), the solver must also return the charge correlator ⟨N^I(t)N^I(0)⟩\langle\hat{N}_I(t)\hat{N}_I(0)\rangle, needed for the bosonic self-consistency Wimp,I≃Wloc,IW_{\mathrm{imp},I} \simeq W_{\mathrm{loc},I}; since N^I\hat{N}_I is a sum of mode occupations, i.e. of Pauli-ZZ operators under the Jordan–Wigner mapping, it is measured term by term with the same type of circuit. Orbital-resolved screening would require orbital-resolved density correlators. The Matsubara Green’s function used in the self-consistency loop follows from the spectral representation, Gimp,I(iωn)=∫dω AI(ω)/(iωn−ω)G_{\mathrm{imp},I}(i\omega_n)=\int d\omega\,A_I(\omega)/(i\omega_n-\omega), without analytic continuation.

Sampling noise and self-consistency. Each correlator is estimated from a finite number of shots at a finite set of times, with a maximum evolution time tmax⁡t_{\max}. The Fourier transform to the real-frequency axis is therefore truncated, and its resolution and ringing must be controlled by windowing and checked against sum rules. Dyson’s equation, Σ=G0−1−Gimp−1\Sigma=G_0^{-1}-G_{\mathrm{imp}}^{-1}, inverts GimpG_{\mathrm{imp}} and so amplifies noise and truncation artefacts where the spectral weight is small, and the subsequent bath refit adds its own ill-conditioning. The self-consistent iterates then fluctuate around the fixed point instead of converging to it, as in CT-QMC-based DMFT, and the converged quantities must be averaged over the last iterations. The relevant precision is that of the energy differences EvacE_{\mathrm{vac}} and EmigE_{\mathrm{mig}}, not of GG itself. Bauer et al. chose the number of measurements so that the sampling error is small compared with the uncertainty of the bath fit [1], which is a sensible rule but not a bound for energy differences. The propagation of correlator noise to these energy differences is the precision budget of § 7.2.

Classical alternatives. Two concurrent preprints, Jiang et al. [41] and Arunachalam et al. [42], give polynomial-time classical algorithms for static properties of quantum impurity models with a constant-size impurity and a free-fermion bath: the partition function, and hence the free energy, and thermal expectation values of static observables (fermionic Gaussian observables in Jiang et al., sums of polynomially many Majorana monomials in Arunachalam et al.), at any temperature. The DMFT loop needs more: the impurity Green’s function is a two-time correlator, on the imaginary or the real time axis, and is not covered by these results. Jiang et al. conclude that a superpolynomial quantum advantage for quantum-enhanced DMFT, if any, must come from such dynamical quantities. Their hardness result concerns nonequilibrium Green’s functions of time-dependent impurity Hamiltonians, not the equilibrium Green’s function of a static HAIM,IH_{\mathrm{AIM},I}, whose classical hardness is open. Arunachalam et al. show that estimating a mode occupation after real-time evolution under a time-independent impurity Hamiltonian with a constant-size impurity is BQP-complete, but for a specially prepared Slater-determinant initial state and a bath constructed for the purpose, not for a thermal state of a fitted DMFT bath. Neither result therefore decides the hardness of the equilibrium Green’s function at the operating temperature, which is why the comparison with the best classical impurity solvers is an empirical test and not a theorem. The classical runtimes of both works are also exponential in the number of impurity orbitals and assume a fermionic bath, which is why the impurity-solver requirements discussed in § 2.4 matter.

Logical-qubit requirements and computational cost drivers

The relevant resource target is an impurity model whose predictions of vacancy and migration energetics are converged. Its quantum cost depends on the interacting active space, the bath representation, and the precision required to distinguish candidate materials.

For NimpN_{\mathrm{imp}} spatial impurity orbitals and nbn_b spatial bath orbitals per impurity orbital, a Jordan–Wigner or Bravyi–Kitaev encoding requires

Nq(ferm)=2(Nimp+Nbath)=2Nimp(1+nb)(14)N_q^{(\mathrm{ferm})}=2(N_{\mathrm{imp}}+N_{\mathrm{bath}})=2N_{\mathrm{imp}}(1+n_b) \tag*{(14)}

logical register qubits, before symmetry reductions and ancillas. Table 1 illustrates the register sizes for a single transition-metal dd shell and a two-site cluster. These counts describe encoding requirements; the bath size must be established by convergence of the target observables.

nbn_b25102050
Single dd shell, Nimp=5N_{\mathrm{imp}} = 53060110210510
Two-site cluster, Nimp=10N_{\mathrm{imp}} = 10601202204201020

Table 1. Illustrative fermionic register sizes versus the number nbn_b of spatial bath orbitals per impurity orbital. Ancillas are excluded.

For dynamical screening, NbosN_{\mathrm{bos}} binary-encoded bosonic modes truncated at nmaxn_{\mathrm{max}} quanta add Nbos⌈log⁡2(nmax+1)⌉N_{\mathrm{bos}\lceil\log_2(n_{\mathrm{max}}+1)\rceil} register qubits. The screening representation and occupation cutoff must likewise be converged.

For efficiently represented discretized impurity Hamiltonians, quantum time evolution can be implemented with gate cost polynomial in system size and evolution time, at fixed simulation accuracy and bounded Hamiltonian parameters. This provides a route to treating interacting active spaces beyond the practical reach of classical solvers. Whether it yields an overall advantage depends on thermal-state preparation, measurement precision, and repeated embedding solves.

For the direct-sampling protocol of § 4.3, the logical gate cost of one impurity solve is schematically

Csolve≈NcorrNshot∑j=1Nt[CGibbs+Cevol(tj)],(15)C_{\mathrm{solve}} \approx N_{\mathrm{corr}}N_{\mathrm{shot}}\sum_{j=1}^{N_t}\left[C_{\mathrm{Gibbs}}+C_{\mathrm{evol}}(t_j)\right], \tag*{(15)}

where NcorrN_{\mathrm{corr}} counts the measured correlators, NtN_t the sampled times, and NshotN_{\mathrm{shot}} the repetitions per correlator and time. Thermal preparation is repeated for each sample. Direct sampling has inverse-square dependence on additive correlator precision, while the evolution cost depends on the simulation method; block-encoding approaches depend on both the Hamiltonian normalization and the gate cost per query. The required precision and time range must be set by their propagated effect on vacancy and migration energies.

The full calculation multiplies this cost by the number of geometries, quantum-treated impurity regions, and embedding iterations. Classical solvers can be retained for tractable regions, concentrating quantum resources on the impurity problems that limit predictive accuracy. The classical GW and embedding workload must also be included when assessing the overall benefit.

These considerations define a concrete route to a resource estimate: establish the smallest converged impurity representation, determine the measurement accuracy needed for reliable material ranking, and evaluate the resulting preparation and simulation circuits. Comparing that workload with the best applicable classical workflow would establish whether the quantum extension is advantageous for this application. Physical-qubit requirements and runtime additionally require a specified fault-tolerant architecture (§ 7.2).

Operational summary

The calculations are organized as a tiered screening funnel (Table 2): DFT screens all candidates, and the GW-based embedding with the quantum impurity solver is applied to the shortlist.

TierMethodApplied to
T0DFTall candidates: geometries, interfaces, NEB paths
T1GW-based embedding (GW+DMFT or SEET), quantum impurity solver; option selected by the bulk pilot (the embedding-method comparison on bulk LSCF, below)shortlist: active spaces beyond classical reach; convergence of energy differences with active-space size

Table 2. Tiered screening funnel.

Steps 1 to 5 below form Tier T0 and steps 6 to 16 form Tier T1. Steps 7 to 16 are written in the familiar DFT+DMFT form; in the GW-based embedding used here, a GW calculation on the T0 geometry supplies the non-local self-energy (step 6), and step 9 uses the diagrammatic DC instead of a DFT+DMFT prescription and the interaction is U(ω)U(\omega) (GW+DMFT) or the bare active-space interaction (SEET); step 14 uses the quantum impurity solver. For each pristine, vacancy, or migration geometry, the complete translation procedure is:

  1. (T0) obtain the experimentally relevant bulk crystal structures;

  1. enumerate orientations, terminations, commensurate cells, and interface registries;

  1. assign dopants and alloy occupations explicitly;

  1. relax and rank the candidate interfaces with periodic DFT;

  1. enumerate chemically distinct oxygen-vacancy sites and migration paths;

  1. (T1) compute the GW self-energy ΣGW(k,ω)\Sigma^{\mathrm{GW}}(\mathbf{k},\omega) and the screened interaction W(ω)W(\omega) on the T0 geometry;

  1. (T1) construct a localized DFT lattice Hamiltonian containing the transition-metal dd, oxygen pp, and any relevant electrolyte states;

  1. select full local Fe and Co 3d3d shells as the initial correlated impurity subspaces;

  1. compute the impurity interaction (U(ω)U(\omega) or the bare active-space interaction) and the diagrammatic double-counting term;

  1. initialize the lattice self-energy and project the lattice Green’s function onto each impurity;

  1. obtain the continuous hybridization function;

  1. fit that function to finite bath energies and couplings;

  1. generate one Anderson impurity Hamiltonian for every inequivalent correlated site;

  1. encode and solve these Hamiltonians on the quantum computer to obtain the impurity Green’s functions and self-energies;

  1. embed the self-energies into the full lattice basis and iterate the embedding loop to self-consistency, including the GW update if fully self-consistent;

  1. reconstruct the interacting lattice Green’s function used to evaluate the macroscopic observables.

The resulting data flow is:

LSCF|GDC atomic geometry↓H0(k), ΣGW(k,ω), U(ω)↓{hI,UI,JI,ΔI(iωn)}↓{ϵℓI,VmℓI}↓HAIM,I↓Gimp,I↓Σlatt(k,z), Glatt(k,z)\begin{gathered} \text{LSCF|GDC atomic geometry}\\ \downarrow\\ H^{0}(\mathbf{k}),\ \Sigma^{\mathrm{GW}}(\mathbf{k},\omega),\ U(\omega)\\ \downarrow\\ \{h_{I},U_{I},J_{I},\Delta_{I}(i\omega_{n})\}\\ \downarrow\\ \{\epsilon_{\ell}^{I},V_{m\ell}^{I}\}\\ \downarrow\\ H_{\mathrm{AIM},I}\\ \downarrow\\ G_{\mathrm{imp},I}\\ \downarrow\\ \Sigma_{\mathrm{latt}}(\mathbf{k},z),\ G_{\mathrm{latt}}(\mathbf{k},z) \end{gathered}

Tier T1 targets enlarged correlated active spaces, potentially including transition-metal dd shells and neighbouring O 2p2p orbitals or clusters around a vacancy. GW+DMFT and SEET should first be benchmarked on bulk LSCF against available thermodynamic data and classical impurity calculations. The potential quantum advantage arises if convergence of EvacE_{\mathrm{vac}} and EmigE_{\mathrm{mig}} requires active spaces beyond the practical capabilities of the best classical solvers. The embedding method and quantum solver must therefore be assessed jointly in terms of predictive accuracy and total computational cost.

Scope of the GW step. The GW workload depends on the chosen level of self-consistency and the interface size. Its computational cost and its contribution to the total workload must be benchmarked for the selected implementation.

Dependency on the atomistic geometry

The accuracy of the embedding calculation is conditional on the quality of the atomistic geometry supplied to it. In the baseline workflow, interface structures, vacancy configurations, and migration pathways are first relaxed at the DFT level and are then held fixed while the correlated electronic problem is solved. If DFT predicts an incorrect local minimum, bonding geometry, vacancy configuration, or migration transition state, improving the many-body treatment at that fixed geometry does not remove the underlying structural error: the calculation would simply provide a more accurate electronic solution for the wrong atomic configuration. The atomistic relaxation should therefore be regarded as a separate source of model uncertainty from the many-body solution itself. In Tier T1, DFT geometries combined with beyond-DFT energies remain the main residual inconsistency, most relevant where changes of the Co spin state alter ionic radii and hence bond lengths.

When structural forces are themselves sensitive to electronic correlations, the relaxation can be promoted from DFT to charge-self-consistent DFT+DMFT. Analytical force formalisms have been developed in which the DFT+DMFT free energy is differentiated with respect to the atomic coordinates, allowing correlated materials to be structurally optimized rather than evaluating DMFT only on a fixed DFT geometry [38, 61, 62]. These force formalisms exist for DFT+DMFT. To our knowledge, no equivalent is yet available for GW+DMFT or SEET at this system size, so Tier T1 uses DFT geometries. In such a calculation, the electronic and structural problems form an additional outer loop:

R(n)⟶DFT+DMFT⟶F(n)=−∂FDFT+DMFT∂R⟶R(n+1),\mathbf{R}^{(n)} \longrightarrow\mathrm{DFT}+\mathrm{DMFT} \longrightarrow\mathbf{F}^{(n)}=-\frac{\partial F_{\mathrm{DFT+DMFT}}}{\partial\mathbf{R}} \longrightarrow\mathbf{R}^{(n+1)},

where R(n)\mathbf{R}^{(n)} denotes the atomic coordinates at relaxation iteration nn, FDFT+DMFTF_{\mathrm{DFT+DMFT}} is the correlated DFT+DMFT free energy, and F(n)\mathbf{F}^{(n)} denotes the corresponding atomic forces. The outer loop is repeated until both the electronic DMFT solution and the atomic forces are converged.

Therefore, a second, distinct quantum-computing opportunity arises if the atomic relaxation itself requires a correlated electronic treatment. DFT+DMFT structural optimization requires repeated evaluation of correlated free energies or forces as the nuclear coordinates are updated. In principle, a quantum impurity solver could replace the classical impurity solver within this outer DFT+DMFT force loop, so that the same quantum many-body subroutine used for the observables also contributes to the forces determining the geometry.

More generally, quantum algorithms for electronic-structure energy derivatives and molecular forces have already been proposed, including phase-estimation- and Hamiltonian-simulation-based approaches suitable for geometry optimization and molecular dynamics [63, 64]. This represents a separate potential quantum advantage from the impurity-solver acceleration studied in the baseline workflow. We do not include this additional structural relaxation cost or benefit in the application presented here.

From microscopic observables to engineering metrics

Finite-thickness MIEC oxygen-electrode model

The electrode micromodel is selected according to the charge-transport and reaction architecture of the electrode rather than being universal across solid-oxide-cell chemistries. Two-phase electrodes such as Ni–YSZ and conventional LSM–YSZ are naturally described by composite-electrode frameworks such as Costamagna, whereas single-phase MIEC oxygen electrodes such as LSCF are more naturally represented by ALS-type models; composite MIEC/ionic-conductor electrodes require corresponding extensions [28, 29, 30].

Because the LSCF oxygen electrode is a mixed ionic-electronic conductor, we describe its polarization using the Adler–Lane–Steele (ALS) continuum framework [29, 32]. In this description, oxygen is incorporated by surface exchange at the internal gas/MIEC surface and subsequently transported through the solid phase. Electrode polarization therefore emerges from the coupled effects of oxygen surface exchange and solid-state oxygen transport.

For a macro-homogeneous porous MIEC electrode, neglecting gas-phase transport limitations, the characteristic chemical resistance and time constant may be written as [32, 65]

Rchem=RgT4F2τγO2(1−ε)cO,eq2Dchemaskchem(16)R_{\mathrm{chem}}=\frac{R_{\mathrm{g}}T}{4F^2}\sqrt{\frac{\tau\gamma_{\mathrm{O}}^2}{(1-\varepsilon)c_{\mathrm{O,eq}}^2D_{\mathrm{chem}}a_{\mathrm{s}}k_{\mathrm{chem}}}} \tag*{(16)}

and

tchem=1−εaskchem(17)t_{\mathrm{chem}}=\frac{1-\varepsilon}{a_{\mathrm{s}}k_{\mathrm{chem}}} \tag*{(17)}

where RgR_{\mathrm{g}} is the universal gas constant, TT is the operating temperature, FF is the Faraday constant, DchemD_{\mathrm{chem}} is the chemical oxygen diffusion coefficient, kchemk_{\mathrm{chem}} is the chemical surface-exchange coefficient, cO,eqc_{\mathrm{O,eq}} is the equilibrium oxygen concentration, γO\gamma_{\mathrm{O}} is the oxygen thermodynamic factor (characterizing the sensitivity of the oxygen chemical potential to changes in oxygen stoichiometry), ε\varepsilon is porosity, τ\tau is the solid-phase tortuosity factor, and asa_{\mathrm{s}} is the internal MIEC/gas surface area per unit electrode volume.

For a finite electrode thickness LL, the chemical impedance takes the finite-length form

Zchem(ω)=Rchem1+iωtchemtanh⁡[Lℓδ1+iωtchem](18)Z_{\mathrm{chem}}(\omega)=\frac{R_{\mathrm{chem}}}{\sqrt{1+i\omega t_{\mathrm{chem}}}}\tanh\left[\frac{L}{\ell_{\delta}}\sqrt{1+i\omega t_{\mathrm{chem}}}\right] \tag*{(18)}

where

ℓδ=(1−ε)Dchemasτkchem(19)\ell_{\delta}=\sqrt{\frac{(1-\varepsilon)D_{\mathrm{chem}}}{a_{\mathrm{s}}\tau k_{\mathrm{chem}}}} \tag*{(19)}

is the characteristic penetration depth of the electrochemically active region. Note that here ω\omega denotes the angular frequency of the applied electrochemical perturbation. In the thick-electrode limit L≫ℓδL \gg\ell_{\delta}, the hyperbolic-tangent term approaches unity and the usual Gerischer-type ALS response is recovered; for thinner electrodes, the finite-thickness correction accounts for increasing utilization of the available electrode volume.

The electrode polarization resistance used for screening is obtained from the low-frequency limit,

ASR≡Rp=lim⁡ω→0Re⁡[Zchem(ω)],(20)ASR \equiv R_{\mathrm{p}}=\lim_{\omega\to0}\operatorname{Re}\left[Z_{\mathrm{chem}}(\omega)\right], \tag*{(20)}

or, when additional experimentally calibrated interfacial contributions are included, from the corresponding low-frequency non-ohmic impedance. This homogenized formulation is intentionally a screening-level model. Modern three-dimensional reconstructions show that local geometry and frequency-dependent effective tortuosity can produce corrections to the macro-homogeneous ALS approximation [31], while recent finite-element implementations retain the same surface-exchange/bulk-diffusion physics and explicitly predict ASR as a function of electrode thickness and morphology [33]. Such models provide a natural higher-fidelity validation layer for candidates retained by the present screening workflow.

How the microscopic observables enter the MIEC model

The embedding observables enter the MIEC continuum model through the defect thermodynamics and transport properties of the oxygen electrode.

From vacancy and migration energies to chemical diffusivity. The vacancy-formation energy determines the equilibrium oxygen-vacancy population through defect thermodynamics. In the dilute-defect limit,

cvac=NOexp⁡(−ΔGvackBT),(21)c_{\mathrm{vac}} = N_{\mathrm{O}} \exp\left(-\frac{\Delta G_{\mathrm{vac}}}{k_{\mathrm{B}}T}\right), \tag*{(21)}

where NON_{\mathrm{O}} is the density of available oxygen sites and ΔGvac\Delta G_{\mathrm{vac}} is the vacancy-formation free energy. Writing

ΔGvac=EvacI−TΔSvac,(22)\Delta G_{\mathrm{vac}} = E_{\mathrm{vac}}^{I} - T\Delta S_{\mathrm{vac}}, \tag*{(22)}

shows explicitly how the embedding vacancy-formation energy, which itself depends on the oxygen chemical potential through Eq. (1), controls the equilibrium defect concentration together with entropic contribution ΔSvac\Delta S_{\mathrm{vac}}. At fixed TT and oxygen partial pressure, a lower EvacIE_{\mathrm{vac}}^{I} therefore produces a larger equilibrium vacancy concentration.

The dilute-defect approximation assumes vacancy-independent formation energies, valid as long as vacancies are spaced far enough apart that their local electronic environments do not overlap. Because strongly correlated transition-metal dd-states reorganize locally around each vacancy, this spacing requirement is typically satisfied at the low vacancy concentrations found in SOFC/SOEC operation. At higher concentrations, or if this electronic reorganization extends beyond the immediate coordination shell, the approximation may break down, representing a possible extension beyond the present screening-level treatment.

For aliovalently doped perovskites such as LSCF, charge neutrality couples the vacancy population to electronic defects and dopant concentration, so the full equilibrium concentration is obtained from the appropriate mass-action and charge-neutrality equations rather than from the dilute Boltzmann form alone.

The vacancy-formation energetics determine the equilibrium defect chemistry of the electrode. For a given temperature TT and oxygen partial pressure pO2p_{\mathrm{O}_2}, the defect-chemistry model is solved subject to mass-action and charge-neutrality constraints to obtain the equilibrium oxygen-vacancy concentration

cvac=cvac(T,pO2).(23)c_{\mathrm{vac}} = c_{\mathrm{vac}}(T,p_{\mathrm{O}_2}). \tag*{(23)}

Repeating this calculation over a range of pO2p_{\mathrm{O}_2} values at fixed temperature produces the equilibrium defect isotherm cvac(pO2)c_{\mathrm{vac}}(p_{\mathrm{O}_2}). The corresponding concentration of occupied oxygen sites is

cO(pO2)=NO−cvac(pO2).(24)c_{\mathrm{O}}(p_{\mathrm{O}_2}) = N_{\mathrm{O}} - c_{\mathrm{vac}}(p_{\mathrm{O}_2}). \tag*{(24)}

The thermodynamic factor is obtained from the slope of this isotherm. Specifically, the oxygen activity aOa_{\mathrm{O}} is related to the oxygen chemical potential through

μO=μO0+kBTln⁡aO,(25)\mu_{\mathrm{O}} = \mu_{\mathrm{O}}^{0} + k_{\mathrm{B}}T \ln a_{\mathrm{O}}, \tag*{(25)}

where μO0\mu_{\mathrm{O}}^{0} is the standard-state oxygen chemical potential. For equilibrium with ideal molecular oxygen gas,

aO=(pO2p0)1/2,(26)a_{\mathrm{O}} = \left(\frac{p_{\mathrm{O}_2}}{p^{0}}\right)^{1/2}, \tag*{(26)}

where p0p^{0} is the reference pressure corresponding to μO0\mu_{\mathrm{O}}^{0}, and therefore

γO≡∂ln⁡aO∂ln⁡cO=12∂ln⁡pO2∂ln⁡cO.(27)\gamma_{\mathrm{O}} \equiv\frac{\partial\ln a_{\mathrm{O}}}{\partial\ln c_{\mathrm{O}}} = \frac{1}{2}\frac{\partial\ln p_{\mathrm{O}_{2}}}{\partial\ln c_{\mathrm{O}}}. \tag*{(27)}

In practice, after calculating cvacc_{\mathrm{vac}} at several oxygen partial pressures, γO\gamma_{\mathrm{O}} can therefore be evaluated numerically, for two neighboring points for example, as

γO≃12ln⁡(pO2(2)/pO2(1))ln⁡(cO(2)/cO(1)),cO(j)=NO−cvac(j).(28)\gamma_{\mathrm{O}} \simeq\frac{1}{2}\frac{\ln\left(p_{\mathrm{O}_{2}}^{(2)}/p_{\mathrm{O}_{2}}^{(1)}\right)}{\ln\left(c_{\mathrm{O}}^{(2)}/c_{\mathrm{O}}^{(1)}\right)}, \qquad c_{\mathrm{O}}^{(j)} = N_{\mathrm{O}} - c_{\mathrm{vac}}^{(j)}. \tag*{(28)}

Thus, EvacIE_{\mathrm{vac}}^{I} enters the defect-chemistry calculation that determines cvac(T,pO2)c_{\mathrm{vac}}(T,p_{\mathrm{O}_{2}}), and the variation of this vacancy concentration with oxygen partial pressure determines γO\gamma_{\mathrm{O}}. Furthermore, oxygen-vacancy migration controls the microscopic vacancy diffusivity,

Dvac∝exp⁡(−EmigIkBT).(29)D_{\mathrm{vac}} \propto\exp\left(-\frac{E_{\mathrm{mig}}^{I}}{k_{B}T}\right). \tag*{(29)}

The oxygen chemical diffusion coefficient entering the MIEC model is then obtained from the defect diffusivity multiplied by the normalized thermodynamic factor,

Dchem≃DvaccvaccOγO.(30)D_{\mathrm{chem}} \simeq D_{\mathrm{vac}}\frac{c_{\mathrm{vac}}}{c_{\mathrm{O}}}\gamma_{\mathrm{O}}. \tag*{(30)}

Thus, EmigIE_{\mathrm{mig}}^{I} controls the kinetic mobility, while EvacIE_{\mathrm{vac}}^{I} influences the equilibrium defect concentration and therefore the thermodynamic factor.

Chemical surface exchange coefficient. The second intrinsic kinetic input to the MIEC model is the chemical surface exchange coefficient kchemk_{\mathrm{chem}}. In the present work, kchemk_{\mathrm{chem}} is treated as an experimentally calibrated parameter. A future extension of the atomistic workflow could calculate the elementary surface reaction energetics required to predict this quantity directly. Its microscopic origin provides a possible additional application of correlated electronic-structure calculations. Oxygen surface exchange involves elementary steps such as adsorption, dissociation, charge transfer, and incorporation into oxygen vacancies. For transition-metal oxide electrodes, the energetics of these steps can depend on the correlated transition-metal dd states and oxygen pp states. A possible extension would therefore calculate the activation free energies of the relevant surface reactions using a correlated embedding method with a quantum impurity solver. Elementary reaction rates could then be estimated through transition-state theory. These rates would enter a surface microkinetic model from which an effective kchemk_{\mathrm{chem}} could be obtained by linearizing the net oxygen-exchange flux around the operating state. This extension is not included in the presented DFT+DMFT workflow, and it stands as an additional opportunity for quantum computing. Its potential quantum advantage would depend on identifying surface-reaction instances for which classical correlated electronic-structure methods remain computationally limiting.

Electronic conductivity as model selection criterion. The ALS model assumes sufficiently rapid electronic transport such that the electronic potential drop across the electrode can be neglected. Thus, the embedding electronic conductivity σeI\sigma_{\mathrm{e}}^{I} provides a consistency condition for the MIEC approximation. For an electrode of thickness LL, the electronic potential drop can be conservatively estimated by

ΔVe≃jeLσeeff(31)\Delta V_e \simeq\frac{j_e L}{\sigma_e^{\mathrm{eff}}} \tag*{(31)}

where jej_e is the electronic current density and σeeff\sigma_e^{\mathrm{eff}} is the effective electronic conductivity (i.e. including porosity correction) in the through-thickness direction. We require ΔVe≤ηe,max⁡\Delta V_e \leq\eta_{e,\max}, where ηe,max⁡\eta_{e,\max} is the maximum electronic voltage drop allowed by screening criteria. This gives

σeeff≥σe,min⁡eff=jeLηe,max⁡.(32)\sigma_e^{\mathrm{eff}} \geq\sigma_{e,\min}^{\mathrm{eff}} = \frac{j_e L}{\eta_{e,\max}}. \tag*{(32)}

Using a simple porous-medium approximation,

σeeff≃1−ετeσeI,(33)\sigma_e^{\mathrm{eff}} \simeq\frac{1-\varepsilon}{\tau_e}\sigma_e^{\mathcal{I}}, \tag*{(33)}

where τe\tau_e denotes electronic-path tortuosity, the corresponding intrinsic conductivity threshold is

σe,min⁡I=τe1−εjeLηe,max⁡.(34)\sigma_{e,\min}^{\mathcal{I}} = \frac{\tau_e}{1-\varepsilon}\frac{j_e L}{\eta_{e,\max}}. \tag*{(34)}

For illustration, at je=0.25 A cm−2j_e = 0.25\ \mathrm{A\,cm}^{-2}, L=30 μmL = 30\ \mu\mathrm{m}, and ηe,max⁡=5 mV\eta_{e,\max} = 5\ \mathrm{mV}, the required effective conductivity is 0.15 S cm−10.15\ \mathrm{S\,cm}^{-1}. If this criterion is satisfied by the embedding electronic conductivity, the electronically equipotential ALS approximation is retained. Otherwise, the candidate is evaluated using an extended MIEC transport model that explicitly couples ionic and electronic current conservation, chemical capacitance, and interfacial reaction kinetics [66]. The Costamagna framework [28] is another alternative fallback for electrodes with distinct percolating ionic and electronic phases.

Operational summary. The resulting hierarchy is therefore

{EvacI,EmigI,σeI}⟶{cvac,Dchem,electronic transport},\{E_{\mathrm{vac}}^{\mathcal{I}}, E_{\mathrm{mig}}^{\mathcal{I}}, \sigma_e^{\mathcal{I}}\} \longrightarrow\{c_{\mathrm{vac}}, D_{\mathrm{chem}}, \text{electronic transport}\},

which, together with

{kchem,γO,ε,τ,as,L},\{k_{\mathrm{chem}}, \gamma_{\mathrm{O}}, \varepsilon, \tau, a_s, L\},

determines the electrode impedance and hence the predicted ASR. The quantum-computed observables therefore remain directly connected to the engineering screening metric, while experimentally calibrated kinetic and microstructural quantities complete the continuum model.

Engineering targets

The screening problem should be tied to explicit engineering targets. In SOFC service, projected DOE stack goals include >60%> 60\% efficiency, 40,000 h lifetime, degradation below 0.2%0.2\% per 1000 h, stack cost of 225 USD/kW, and system cost of 900 USD/kW [4]. For high-temperature electrolysis, DOE targets include stack performance of 1.2 A/cm21.2\ \mathrm{A/cm}^{2} at 1.28 V/cell, 40,000 h lifetime by 2026 and 80,000 h ultimate lifetime, stack cost of 125 USD/kW by 2026, and system electricity consumption of 36 kWh/kg H2_2 by 2026 [5]. Motivated by these public targets, we take practical oxygen-electrode screening targets to be:

500 ∘C≤Top≤700 ∘C,50,000–100,000 h,500\,^\circ\mathrm{C} \le T_{\mathrm{op}} \le700\,^\circ\mathrm{C}, \qquad50{,}000\text{--}100{,}000\ \mathrm{h},

and an electrode overpotential target of approximately 50 mV50\ \mathrm{mV} at 0.25 A/cm20.25\ \mathrm{A}/\mathrm{cm}^{2}, corresponding to an electrode ASR target of

ASRtarget=0.05 V0.25 A/cm2=0.20 Ω cm2.(35)ASR_{\mathrm{target}}=\frac{0.05\ \mathrm{V}}{0.25\ \mathrm{A}/\mathrm{cm}^{2}}=0.20\ \Omega\,\mathrm{cm}^{2}. \tag*{(35)}

We treat this ASR target as a design criterion for screening rather than as a universal industry standard.

Importantly, a favorable ASR is a necessary but not sufficient condition for a viable oxygen-electrode material. The MIEC micromodel used here evaluates one part of the design problem: oxygen surface-exchange kinetics, bulk oxygen transport, defect thermodynamics, electrode thickness, porosity, tortuosity, and internal reactive surface area, with electronic transport treated explicitly when it is not sufficiently fast to be neglected. It does not by itself establish overall material or device suitability. We have listed in § 3.3 other criteria that need to be taken into account in a comprehensive screening.

Amplification of microscopic errors at the engineering level

The exponential dependence of oxygen transport on migration energetics means that relatively small errors in the microscopic activation energies can produce materially larger errors in predicted electrode resistance. To illustrate this effect, consider the finite-thickness MIEC model introduced above. The chemical diffusion coefficient has an Arrhenius dependence,

Dchem∝exp⁡(−EDkBT),(36)D_{\mathrm{chem}} \propto\exp\left(-\frac{E_D}{k_{\mathrm{B}}T}\right), \tag*{(36)}

where

ED≃EmigT−kB∂ln⁡(cvaccOγO)∂(1/T),(37)E_D \simeq E_{\mathrm{mig}}^{T}-k_{\mathrm{B}}\frac{\partial\ln\left(\frac{c_{\mathrm{vac}}}{c_{\mathrm{O}}}\gamma_{\mathrm{O}}\right)}{\partial(1/T)}, \tag*{(37)}

is the effective activation energy containing the microscopic contributions controlling oxygen mobility and defect thermodynamics.

In the thick-electrode limit, L≫ℓδL \gg\ell_{\delta}, the ALS resistance scales as

ASR∝Dchem−1/2kchem−1/2.(38)ASR \propto D_{\mathrm{chem}}^{-1/2}k_{\mathrm{chem}}^{-1/2}. \tag*{(38)}

Holding the surface-exchange coefficient fixed therefore gives

δASRASR≃12δEDkBT.(39)\frac{\delta ASR}{ASR}\simeq\frac{1}{2}\frac{\delta E_D}{k_{\mathrm{B}}T}. \tag*{(39)}

For illustration, suppose a migration energy EmigT=0.5 eVE_{\mathrm{mig}}^{T}=0.5\ \mathrm{eV} at T=973 KT=973\ \mathrm{K}, where kBT≃0.084 eVk_{\mathrm{B}}T\simeq0.084\ \mathrm{eV}, a one-percentage-point improvement in the relative accuracy of the migration barrier corresponds to

δEmigT=0.01×0.5=0.005 eV.(40)\delta E_{\mathrm{mig}}^{T}=0.01\times0.5=0.005\ \mathrm{eV}. \tag*{(40)}

The contribution of EmigIE_{\mathrm{mig}}^{I} to the uncertainty in the chemical diffusion coefficient is approximately

δDchemDchem≃0.0050.084≃6%,(41)\frac{\delta D_{\mathrm{chem}}}{D_{\mathrm{chem}}} \simeq\frac{0.005}{0.084} \simeq6\%, \tag*{(41)}

and therefore produces approximately

δASRASR≃3%(42)\frac{\delta ASR}{ASR} \simeq3\% \tag*{(42)}

uncertainty in the predicted ASR in the thick-electrode limit.

The amplification depends on electrode thickness. In the thin-electrode limit, L≪ℓδL \ll\ell_{\delta}, the finite-thickness expression reduces approximately to

ASR∝Dchem−1,(43)ASR \propto D_{\mathrm{chem}}^{-1}, \tag*{(43)}

so that the same microscopic energy improvement produces an approximately 6% change in the predicted ASR. Thus the engineering value of improved microscopic accuracy is itself regime dependent: candidate electrodes whose performance is bulk-diffusion limited are more sensitive to migration-energy accuracy than those dominated by surface exchange [32, 33].

The framework therefore provides a quantitative route for translating improved microscopic prediction accuracy into improved confidence in engineering-level material ranking.

Market impact and business value

We estimate the economic value of quantum-enabled materials discovery using a bottom-up approach that translates improvements in oxygen-electrode properties into specific economic consequences at the cell and system level. We first define future SOEC and SOFC deployment scenarios and then estimate, for each installed gigawatt, the annual value associated with improvements in operating performance, system cost, and durability. These per-unit benefits are multiplied by the relevant installed or newly deployed capacity and supplemented by the value of faster materials R&D. SOEC and SOFC are treated separately because the same materials improvement creates value through different mechanisms in electrolysis and power-generation operation.

Value levers

Our bottom-up market value model, estimating the yearly value for SOEC and SOFC uses four value levers:

Lower operating temperature. Reducing the oxygen-electrode polarization resistance, expressed here as ASR, allows acceptable performance at lower TT, which can reduce degradation, easing materials constraints and balance-of-plant requirements.

Higher efficiency. Lower ASR reduces voltage loss:

ΔV=j ΔASR(44)\Delta V = j \, \Delta ASR \tag*{(44)}

where jj is the operating current density of the device. In SOEC mode this reduces electricity consumption per kilogram of hydrogen. In SOFC mode it increases electrical efficiency.

Longer lifetime. Durability also improves via reduced resistance, reducing replacement frequency and service cost.

Faster R&D screening. Interface-aware quantum-enhanced embedding can eliminate poor electrode/electrolyte pairs early, reducing synthesis and testing cycles.

SOEC global value pool

Capacity for SOECs is measured in gigawatts (GW), capturing the rate at which electrical energy can be converted into hydrogen. Improvements to the electrode materials lead to higher energy efficiency, thus lower energy requirements per volume of hydrogen produced. In this model, we estimate the total volume of energy saved for a fixed volume of hydrogen produced: combined with the price of electricity, we can calculate the value generated by the improved electrolytic cell design. IEA reports that installed electrolysis capacity for dedicated hydrogen production reached 1.4 GW by the end of 2023 and that announced projects could lead to 230–520 GW by 2030, although only around 20 GW had reached final investment decision or construction status at the time of reporting [34, 35]. We therefore use stylized SOEC deployment scenarios of 10, 25, and 50 GW by 2030, representing a modest share (5-20%) of the broader electrolyser pipeline, making our model rather conservative.

For 1 GW of installed SOEC capacity, assuming an 80% capacity factor and 40 kWh/kg H2_2 electricity consumption, annual hydrogen production is

1,000,000×8760×0.840=175.2×106 kg H2/yr.(45)\frac{1{,}000{,}000 \times8760 \times0.8}{40} = 175.2 \times10^{6}\ \mathrm{kg\ H_2/yr}. \tag*{(45)}

Assume a representative oxygen-electrode improvement of ΔASR=0.05 Ωcm2\Delta ASR = 0.05\ \Omega\mathrm{cm}^{2} at j=1 A/cm2j = 1\ \mathrm{A/cm}^{2}, implying ΔV=0.05 V\Delta V = 0.05\ \mathrm{V}. Taking an experimentally reported baseline oxygen-electrode ASR of 0.32 Ωcm2\Omega\mathrm{cm}^{2} at 700°C for a LSCF–GDC composite [67], the assumed improvement corresponds to a 15.6% reduction in resistance. In the thick-electrode approximation of § 5.4, this could be achieved through an approximately 5.7% reduction in a 0.5 eV migration barrier (i.e. 0.031 eV), holding other MIEC parameters fixed. Then

ΔkWh/kg H2≈26.6×ΔV=1.33 kWh/kg H2,(46)\Delta\mathrm{kWh/kg\ H_2} \approx26.6 \times\Delta V = 1.33\ \mathrm{kWh/kg\ H_2}, \tag*{(46)}

and at 40 USD/MWh electricity price the saving is 0.053 USD/kg H2_2, or 9.3 M USD per GW-year. For lower-temperature operation, we assume the improved oxygen electrode reduces effective system cost on new SOEC installations by 5%. Using the Arrhenius dependence of electrode resistance derived in § 5.4, the illustrative 0.031 eV reduction in the effective energy from 0.5 eV would allow the operating temperature to decrease from 700°C to down to 640°C, under otherwise unchanged transport parameters. The underlying rationale behind system-cost savings is that lower operating temperatures relax the thermal requirements imposed on stack and balance-of-plant components, enabling the use of lower-cost materials for components such as interconnects, seals, insulation, and piping, while potentially simplifying system integration and thermal management

[68] Using DOE’s 500 USD/kW 2026 system target as a public anchor but retaining a stylized 300 USD/kW working assumption for a future mature case, and assuming annual new installations equal 20% of installed capacity, this yields 30, 75, and 150 M USD/year in the three scenarios. For lifetime, we assume a stack-cost proxy of 100 USD/kW and a barrier-enabled lifetime improvement from 50,000 h to 75,000 h. The same illustrative reduction in operating temperature from 700°C to 640°C can indeed slow thermally activated degradation mechanisms, including interfacial reactions and cation diffusion, providing a physical rationale. At 80% capacity factor (accounting for downtime and maintenance), this corresponds to 7.1 to 10.7 years, implying 4.7 M USD/GW-year replacement savings. For R&D, we assume a global annual value of 50, 100, and 200 M USD/year. Combining these yields the SOEC value pool in Table 3.

ScenarioConservativeBaseUpside
Installed capacity (GW)102550
Efficiency value (M USD/yr)93233466
Lower-temperature value (M USD/yr)3075150
Lifetime value (M USD /yr)47117234
R&D screening value (M USD/yr)50100200
Total SOEC value (M USD/yr)2205251050

Table 3. Stylized global SOEC value sizing.

Thus the SOEC value pool is approximately 0.2–1.1 B USD/year, with a base case around 0.5 B USD/year.

SOFC global value pool

For SOFCs we use stylized deployment scenarios of 5, 15, and 30 GW by 2030. These values are scenarios rather than externally published capacity forecasts, anchored to the observed commercial scale and projected growth of stationary SOFC deployment. Bloom Energy, currently the largest commercial supplier of stationary SOFC systems, reports more than 1.5 GW of fuel-cell generation deployed across more than 1,200 installations globally [69]. Recent contracted projects indicate that multi-gigawatt additions are already becoming commercially relevant: Bloom’s agreement with Oracle alone provides for up to 2.8 GW of fuel-cell capacity, including an initial 1.2 GW already contracted and under deployment [70]. The stationary SOFC market is also projected to grow strongly, from approximately 3.2 billion USD in 2025 to 9.6 billion USD by 2030 (a compound annual growth rate of 24.4%) [71]. Together, these observations make a future global installed base in the 5–30 GW range a reasonable scenario set for an order-of-magnitude value analysis. The range should nevertheless be interpreted as a sensitivity assumption rather than a forecast. Public DOE targets for SOFCs anchor costs and performance: > 60% efficiency, 225 USD/kW stack cost, 900 USD/kW system cost, and 40,000 h lifetime with low degradation [4].

For a 1 GW SOFC fleet operating at 80% capacity factor, annual electricity output is

Eel=1×8760×0.8=7.008 TWh/yr.(47)E_{\mathrm{el}} = 1 \times8760 \times0.8 = 7.008\ \mathrm{TWh/yr}. \tag*{(47)}

Assume a baseline electrical efficiency of 60%, a baseline cell voltage Vcell=0.8 VV_{\mathrm{cell}} = 0.8\ \mathrm{V}, and again

ΔASR=0.05 Ωcm2\Delta ASR = 0.05\ \Omega\mathrm{cm}^{2} at j=1 A/cm2j = 1\ \mathrm{A}/\mathrm{cm}^{2}, implying ΔV=0.05 V\Delta V = 0.05\ \mathrm{V}. Approximating the relative efficiency gain by ΔV/Vcell=6.25%\Delta V/V_{\mathrm{cell}} = 6.25\%, the improved efficiency is 63.75%. Then the fuel saved is

ΔEfuel=7.0080.60−7.0080.6375=0.69 TWhfuel/GW⋅yr.(48)\Delta E_{\mathrm{fuel}} = \frac{7.008}{0.60} - \frac{7.008}{0.6375} = 0.69\ \mathrm{TWh}_{\mathrm{fuel}}/\mathrm{GW}\cdot\mathrm{yr}. \tag*{(48)}

At 30 USD/MWhfuel_{\mathrm{fuel}}, this is 20.7 M USD/GW-year. For stack-cost savings on new installations we use a 5% reduction applied to a 225 USD/kW stack cost and 20% annual reinvestment rate. For lifetime we again assume an improvement from 50,000 h to 75,000 h, which implies 10.5 M USD/GW-year replacement savings at 225 USD/kW. For faster R&D we assume 25, 75, and 150 M USD/year. Results are summarized in Table 4.

ScenarioConservativeBaseUpside
Installed capacity (GW)51530
Fuel-savings value (M USD/yr)104311622
Stack-cost value (M USD/yr)113468
Lifetime value (M USD/yr)53158315
R&D screening value (M USD/yr)2575150
Total SOFC value (M USD/yr)1935781155

Table 4. Stylized global SOFC value sizing.

Thus the SOFC value pool is approximately 0.2–1.2 B USD/year, with a base case around 0.6 B USD/year.

Combined global value pool from bottom-up model

Our bottom-up model yields a combined SOEC and SOFC annual gross value (i.e. value creation) pool of approximately

0.41,1.11,2.21 B USD/yr0.41,\quad1.11,\quad2.21\ \mathrm{B\ USD/yr}

for the conservative, base, and upside cases. The gross value is enabled by better oxygen-electrode materials and interfaces, reflecting the fact that quantum computing improves a high-impact subproblem of solid-oxide cell design.

Top-down validation of the market value estimates

As a top-down validation, we compare the bottom-up value pool estimated above with broader estimates of the economic value of fault-tolerant quantum computing in materials design. BCG analysis estimates that, at maturity, quantum-enabled materials design could generate approximately 27-55 billion USD of annual economic value across industries [72]. A more fine-grained analysis (unpublished) of internal data underlying these estimates reveal that approximately 35.3 billion USD of annual value are directly relevant to our use case, given the presently considered value levers. This comprises 11.9 billion USD per year of cost savings, including approximately 9.3 billion USD in R&D expenditure, together with 16.7 billion USD per year from net-new materials and 6.7 billion USD per year from improvements to existing materials. More recent published BCG work similarly identifies chemistry and materials simulation among the high-value applications expected to become accessible to early fault-tolerant quantum computers [73].

Against this cross-industry value pool, the combined SOFC/SOEC value estimated in our bottom-up model—0.41 billion, 1.11 billion, and 2.21 billion USD per year in the conservative, base, and upside scenarios, respectively—corresponds approximately to

0.4135.3≃1.2%,1.1135.3≃3.1%,2.2135.3≃6.3%(49)\frac{0.41}{35.3} \simeq1.2\%, \qquad\frac{1.11}{35.3} \simeq3.1\%, \qquad\frac{2.21}{35.3} \simeq6.3\% \tag*{(49)}

of the total materials-design value pool. The different scenarios therefore imply that quantum-enabled materials design for the specific solid-oxide fuel-cell and electrolysis technologies considered here could account for approximately 1−6%1-6\% of the total economic value attributed to quantum-enabled materials design across all materials and industries. Given the narrow scope of the present application relative to the full materials-design opportunity—which also includes batteries, catalysts, chemicals, structural materials, semiconductors, and other applications—this share provides a first directionally consistent top-down validation of the bottom-up estimate.

Furthermore, because the economic value estimated here is intended to materialize in the fault-tolerant quantum-computing era, a comparison with the projected rather than current market for the underlying technology provides an additional top-down consistency check. Grand View Research projects the global market for stationary solid-oxide fuel cells (SOFCs) to reach approximately 10.1 billion USD per year by 2033 [74]. This is the closest available market benchmark for the SOFC application considered here, as it specifically covers stationary electricity generation using the same solid-oxide technology.

Our base-case estimate of approximately 0.58 billion USD per year of value creation from improved SOFC oxygen-electrode materials therefore represents approximately

0.5810.1≃5.7%(50)\frac{0.58}{10.1} \simeq5.7\% \tag*{(50)}

of the projected stationary SOFC market. The conservative and upside estimates of 0.19 billion and 1.16 billion USD correspond to approximately 1.9% and 11.5%, respectively. These ratios appear directionally consistent with the scope of the intervention: the proposed computation does not create the complete SOFC system, but targets oxygen-electrode materials whose properties directly affect cell efficiency, power density, degradation, and stack lifetime. As a broader independent benchmark, BCG estimates that equipment for hydrogen-based power and heat generation could represent an 8–10 billion USD annual market by 2050, including both stationary fuel cells and hydrogen combustion technologies [75]. The similar order of magnitude obtained from these independent market projections provides an additional top-down consistency check on the bottom-up value estimate.

Discussion

Two architectural points are worth emphasizing. First, the role of the electrolyte is not to add extra observables. Rather, it changes the atomistic structure and therefore the DFT-derived Hamiltonian from which the local impurity models are built. The core observables must therefore be computed in the interfacial environment. Second, the impurity solver remains local even in the interface case; the quantum computer is solving the Anderson impurity model, not the full heterogeneous device. This is exactly why the application is plausible at all [1].

The remaining scientific risk lies in model calibration, in the accuracy of the structural and electronic approximations, and, specific to the quantum step, in whether a quantum impurity solver is needed and affordable at the required accuracy (§ 7.2). Three of these deserve particular attention. The first is the maturity of total energies beyond DFT+DMFT: to our knowledge, GW-based embeddings have not yet delivered defect energetics in large relaxed supercells of transition-metal oxides (§ 2.3). The second is the use of DFT geometries with beyond-DFT energies (§ 4.6). The third is the classical cost of the GW step in Tier T1. If this step dominates, accelerating the impurity solver gives only a limited reduction in total cost (§ 7.2). The choice of correlated subspace, determination of UU and JJ, stability of total-energy differences in the chosen embedding, and bath discretization needed for reliable barrier estimates are all nontrivial. In addition, the baseline workflow inherits the atomic geometries produced by DFT relaxation; where correlation effects materially change the forces or transition-state geometry, a DFT-relaxed structure may itself become the dominant source of error. DFT+DMFT force calculations and structural optimization provide a route to remove this assumption, although at substantially greater computational cost [38, 61, 62]. These are expert-facing implementation and validation questions that must ultimately be benchmarked against experiment.

A natural first step is a validation benchmark before the interface calculations. The GW-based embedding is run on bulk LSCF at increasing active-space size, with DFT+UU as a reference, and its μO(δ)\mu_{\mathrm{O}}(\delta) and EvacE_{\mathrm{vac}} are compared with thermogravimetry [44] before the interface is treated. This benchmark also fixes the active-space size needed for converged energy differences before the interface calculations.

From a single use case to a library of quantum-relevant materials problems

The SOFC/SOEC example should be viewed as one instance of a broader research program rather than as an isolated quantum-computing application. The longer-term objective is to construct a curated library of industrial materials-design problems in which strong electronic correlations create a well-defined limitation for conventional computational screening and in which DMFT maps that limitation onto quantum-computable impurity models. Candidate instances could span transition-metal oxides for batteries and catalysis, correlated electrocatalysts, magnetic and multiferroic materials, rare-earth compounds, and other systems containing partially filled localized dd or ff shells [12, 76, 77]. The relevant unit of the library would not simply be a material composition, but a complete computational instance: crystal or interface geometry, correlated subspace, interaction parameters, impurity Hamiltonian, target temperature and accuracy, classically computed baseline, experimentally measurable target observable, and the engineering decision affected by that observable, together with the active-space size that each observable needs.

Such a library would serve three purposes. First, it would allow classical methods—including DFT, DFT+UU, and state-of-the-art classical DMFT solvers—to be benchmarked systematically against experiment, identifying where additional many-body accuracy has genuine decision value. Second, it would provide concrete Anderson impurity Hamiltonians on which competing quantum algorithms and fault-tolerant architectures could be compared using common accuracy and resource metrics. Third, it would connect quantum resource requirements to industrial value: for each instance, one could ask not only how many logical qubits and gates are required, but whether the resulting improvement in predictive accuracy changes a material-selection decision sufficiently to justify the computation. The present LSCF/GDC workflow provides a template for constructing the first such instances.

Open problems for the quantum step

Quantum impurity solvers offer a potential route to extending the correlated active spaces accessible to materials screening. Establishing their practical advantage requires resolving four questions concerning the required impurity model, quantum execution costs, observable-level accuracy, and the complete embedding workload.

  • Required impurity model and classical baseline. Establish convergence of EvacE_{\mathrm{vac}} and EmigE_{\mathrm{mig}} with correlated active-space size and bath discretization, and benchmark the best applicable classical impurity solvers at the target temperature. Bulk LSCF provides an initial benchmark, followed by tests on the relevant interface configurations. For GW+DMFT, the comparison must include classical solvers for dynamical monopole screening with static exchange.

  • Quantum preparation and simulation cost. Determine the cost of thermal-state preparation and Hamiltonian simulation for the converged impurity models. This includes the block-encoding normalization and query implementation, or the corresponding costs of alternative simulation methods. For dynamical screening, convergence must also be established with respect to the number of bosonic modes and their occupation cutoffs.

  • Precision and finite-temperature energetics. Quantify how errors in measured correlators, bath fitting and incomplete self-consistency propagate to the target energy differences and candidate rankings. Controlled-noise classical calculations can establish the required measurement precision. The chosen embedding free-energy functional must also be implemented and evaluated consistently for these models.

  • End-to-end resources. Combine the cost per impurity solve with the number of geometries, correlated regions and self-consistency iterations. Include the classical GW and embedding workload, which may limit the total speedup, and translate the logical circuit costs into physical qubits and runtime for a specified fault-tolerant architecture.

Classical polynomial-time guarantees for equilibrium properties of constant-size impurities coupled to fermionic baths [41, 42] provide important context, but do not establish practical efficiency for the enlarged active spaces and screening models considered here. A formal complexity separation is not required to demonstrate a practical advantage. The decisive comparison is the total cost of obtaining predictions at the accuracy needed for material screening.

Conclusion

We have presented an end-to-end application architecture for quantum computing in industrial materials science, using strongly correlated oxygen-electrode screening for SOFCs and SOECs as the concrete use case. The architecture begins with an interface-aware materials problem, continues through a DFT screen and a GW-based embedding (GW+DMFT or SEET) whose local impurity problems are solved on a quantum computer, maps the resulting observables into an electrode-resistance model, and ends with deployment-scale business value.

The correlated calculations use GW-based embedding (GW+DMFT or SEET), applied with the quantum impurity solver to a DFT-screened shortlist. We propose to select between these options through a bulk LSCF benchmark against experimental thermodynamic data and classical impurity calculations. The quantum computer solves impurity problems of the target class defined in § 2.4, with the correlated active space enlarged until total-energy differences converge, if that active space lies beyond the best classical impurity solvers, which the bulk benchmark and the comparison with the best classical impurity solvers test.

The result is a practical translation layer between four communities that rarely write in the same language: materials scientists, condensed-matter physicists, quantum-computing researchers, and industrial strategists. In that sense, this paper’s main contribution is neither purely scientific (and computational) nor purely economic. It is a proposal for a coherent application stack, together with the open problems that decide whether its quantum part pays off.

Appendix

Crystallographic and atomistic construction details

Generic procedure

The first input is a pair of experimentally relevant crystal structures, for the composition and operating conditions of interest. A crystal is described by a unit cell that contains an atomic basis and is repeated periodically [78].

For an ideal cubic perovskite ABO3ABO_3, where AA and BB denote different chemical elements whereas OO always denotes oxygen atoms, Figure 3 left, the conventional fractional coordinates are

Ideal bulk crystal structures used as the starting point for the atomistic models

Figure 3. Ideal bulk crystal structures used as the starting point for the atomistic models. Left: cubic perovskite ABO3ABO_{3} (Pm3ˉmPm\bar{3}m), with AA cations at the cube corners, the BB cation at the body center, and oxygen atoms at the face centers. Right: cubic fluorite CeO2\mathrm{CeO}_{2} (Fm3ˉmFm\bar{3}m), with Ce cations forming a face-centered-cubic sublattice and oxygen atoms occupying the tetrahedral sites. The actual LSCF and GDC structures are obtained from these parent lattices by introducing the appropriate cation substitutions and oxygen non-stoichiometry, followed by structural relaxation.

A:(0,0,0),B:(12,12,12),A : (0,0,0), \qquad B : \left(\frac{1}{2},\frac{1}{2},\frac{1}{2}\right),
O1:(12,12,0),O2:(12,0,12),O3:(0,12,12).O_1 : \left(\frac{1}{2},\frac{1}{2},0\right), \qquad O_2 : \left(\frac{1}{2},0,\frac{1}{2}\right), \qquad O_3 : \left(0,\frac{1}{2},\frac{1}{2}\right).

The corner AA atoms and face-centered oxygen atoms are shared between neighboring cells, so the basis contains one ABO3ABO_3 formula unit. A 2×2×12 \times2 \times1 supercell therefore repeats this atomic basis four times and contains four ABO3ABO_3 formula units.

Starting from the ideal perovskite ABO3ABO_3, the LSCF composition is obtained by substituting the AA- and BB-site cations:

La0.6Sr0.4Co0.2Fe0.8O3−δ.\mathrm{La}_{0.6}\mathrm{Sr}_{0.4}\mathrm{Co}_{0.2}\mathrm{Fe}_{0.8}\mathrm{O}_{3-\delta}.

On the AA-site, Sr2+\mathrm{Sr}^{2+} substitutes for La3+\mathrm{La}^{3+}. Because Sr2+\mathrm{Sr}^{2+} carries one positive charge less than La3+\mathrm{La}^{3+}, this aliovalent substitution must be compensated by changes elsewhere in the crystal. Charge compensation occurs through a combination of changes in the oxidation states of the Co/Fe BB-site cations and the formation of oxygen vacancies. The latter produces the oxygen non-stoichiometry represented by δ\delta in O3−δ\mathrm{O}_{3-\delta}.

On the BB-site, Co and Fe occupy the transition-metal sites in the nominal ratio. For example, a supercell containing 20 perovskite formula units can represent the nominal composition explicitly as

La12Sr8Co4Fe16O60−Nvac,\mathrm{La}_{12}\mathrm{Sr}_{8}\mathrm{Co}_{4}\mathrm{Fe}_{16}\mathrm{O}_{60-N_{\mathrm{vac}}},

where NvacN_{\mathrm{vac}} is the number of oxygen atoms removed from the oxygen sublattice. The corresponding oxygen non-stoichiometry is

δ=Nvac20.(51)\delta= \frac{N_{\mathrm{vac}}}{20}. \tag*{(51)}

Removing one oxygen atom gives δ=0.05\delta= 0.05, corresponding to

La0.6Sr0.4Co0.2Fe0.8O2.95.\mathrm{La}_{0.6}\mathrm{Sr}_{0.4}\mathrm{Co}_{0.2}\mathrm{Fe}_{0.8}\mathrm{O}_{2.95}.

The particular La/Sr and Co/Fe site occupations and the locations of the oxygen vacancies must be specified explicitly in the atomistic supercell and the resulting structure subsequently relaxed with DFT.

For an ideal cubic fluorite electrolyte MO2MO_2, such as ceria CeO2\mathrm{CeO}_2, Figure 3 right, the conventional fractional coordinates of the cations are

M1:(0,0,0),M2:(0,12,12),M3:(12,0,12),M4:(12,12,0),\begin{aligned} M_1 &: (0,0,0), \qquad M_2 : \left(0,\frac{1}{2},\frac{1}{2}\right),\\ M_3 &: \left(\frac{1}{2},0,\frac{1}{2}\right), \qquad M_4 : \left(\frac{1}{2},\frac{1}{2},0\right), \end{aligned}

while the oxygen atoms occupy the tetrahedral sites

O1:(14,14,14),O2:(14,14,34),O3:(14,34,14),O4:(34,14,14),O5:(34,34,14),O6:(34,14,34),O7:(14,34,34),O8:(34,34,34).\begin{aligned} O_1 &: \left(\frac{1}{4},\frac{1}{4},\frac{1}{4}\right), \qquad O_2 : \left(\frac{1}{4},\frac{1}{4},\frac{3}{4}\right),\\ O_3 &: \left(\frac{1}{4},\frac{3}{4},\frac{1}{4}\right), \qquad O_4 : \left(\frac{3}{4},\frac{1}{4},\frac{1}{4}\right),\\ O_5 &: \left(\frac{3}{4},\frac{3}{4},\frac{1}{4}\right), \qquad O_6 : \left(\frac{3}{4},\frac{1}{4},\frac{3}{4}\right),\\ O_7 &: \left(\frac{1}{4},\frac{3}{4},\frac{3}{4}\right), \qquad O_8 : \left(\frac{3}{4},\frac{3}{4},\frac{3}{4}\right). \end{aligned}

The cations form a face-centered-cubic sublattice, while the oxygen atoms occupy the eight tetrahedral sites of the conventional cell. One conventional fluorite cell therefore contains four MO2\mathrm{MO}_2 formula units, i.e. M4O8\mathrm{M}_4\mathrm{O}_8.

For the electrolyte GDC, the parent fluorite structure is modified by replacing a fraction of the Ce4+\mathrm{Ce}^{4+} cations by Gd3+\mathrm{Gd}^{3+}. For example,

Ce0.9Gd0.1O1.95\mathrm{Ce}_{0.9}\mathrm{Gd}_{0.1}\mathrm{O}_{1.95}

corresponds to replacing 10% of the Ce sites by Gd. Charge neutrality requires approximately one oxygen vacancy for every two Gd3+\mathrm{Gd}^{3+} ions substituted for Ce4+\mathrm{Ce}^{4+}:

2 GdCe⟶VO,2\ \mathrm{Gd}_{\mathrm{Ce}} \longrightarrow V_{\mathrm{O}},

in standard Kröger–Vink notation.

Because a single conventional fluorite cell contains only four cation sites, a larger supercell is required to represent the 10% Gd concentration explicitly. For example, a supercell containing 20 cation sites can be constructed from the ideal fluorite lattice and populated with

18 Ce,2 Gd,39 O.18\ \mathrm{Ce}, \qquad2\ \mathrm{Gd}, \qquad39\ \mathrm{O}.

Starting from the ideal fluorite coordinates, two Ce atoms are replaced by Gd and one oxygen atom is removed from one of the tetrahedral oxygen sites. The particular locations of the Gd dopants and oxygen vacancy constitute additional atomistic degrees of freedom and should be sampled over several distinct configurations. The resulting structure is subsequently relaxed with DFT, so that the final atomic positions generally differ from the ideal fluorite coordinates given above.

Building an interface from these two bulk structures requires four choices, illustrated in Figure 4.

Construction of an electrode/electrolyte interface supercell from parent perovskite and fluorite structures

Figure 4. Illustration of the construction of an electrode/electrolyte interface supercell from the parent perovskite and fluorite structures. The example shows a (001)-oriented, AOAO-terminated perovskite interfaced with a Ce-terminated (001) fluorite structure. In an application to LSCF/GDC, the in-plane surface cells are first made commensurate through an appropriate choice of supercell, relative rotation, and small lattice strain. The terminating planes and their lateral registry are then chosen, an initial interface separation is specified, and the complete atomic structure is relaxed with DFT. The resulting relaxed supercell provides the atomistic input for the subsequent electronic-structure and embedding calculations.

Orientation. The orientation specifies which crystallographic plane of the electrode faces which plane of the electrolyte, for example

(001)electrode∥(001)electrolyte.(001)_{\mathrm{electrode}} \parallel(001)_{\mathrm{electrolyte}}.

Termination. The termination specifies the last atomic plane of each crystal. Along the [001][001] direction, an ideal perovskite consists of alternating planes

AO∣BO2∣AO∣BO2∣⋯AO \mid BO_{2} \mid AO \mid BO_{2} \mid\cdots

It can therefore terminate in either an AOAO or a BO2BO_{2} plane.

Registry. The registry specifies the lateral translation between the two terminated surfaces. A transition-metal ion at the interface may, for example, face an electrolyte oxygen, an electrolyte cation, or a hollow site. These registries generally have different energies.

Commensurate surface cell. The two surface lattices must be represented in a common periodic cell. Integer repetitions and relative rotations of the two surface cells are searched until their in-plane vectors match within an acceptable strain [79]. If the surface matrices of the two materials, whose columns are the in-plane lattice vectors, are S1\mathbf{S}_1 and S2\mathbf{S}_2, the search seeks integer matrices M1\mathbf{M}_1 and M2\mathbf{M}_2 and a rotation R(θ)R(\theta) such that

S1M1≈R(θ)S2M2.(52)\mathbf{S}_1\mathbf{M}_1 \approx R(\theta)\mathbf{S}_2\mathbf{M}_2. \tag*{(52)}

For each plausible orientation, the workflow is:

  1. enumerate distinct terminations of both materials;

  1. identify low-strain commensurate surface cells;

  1. enumerate distinct lateral registries;

  1. relax each candidate interface using DFT;

  1. retain the lowest-energy structures and any near-degenerate alternatives.

For a symmetric periodic supercell containing two equivalent interfaces, an interface-energy comparison can be written schematically as

γint=Ecell−∑sNsμs2S(53)\gamma_{\mathrm{int}} = \frac{E_{\mathrm{cell}}-\sum_s N_s\mu_s}{2S} \tag*{(53)}

where SS is the area of one interface, NsN_s is the number of atoms of species ss, and μs\mu_s is its chemical potential. If two candidate terminations contain different numbers of oxygen atoms, their stability must be compared at the oxygen chemical potential corresponding to the relevant temperature and oxygen partial pressure.

Running example: an LSCF/GDC interface

We use as a running example

La0.6Sr0.4Co0.2Fe0.8O3−δ⏟LSCF oxygen electrode∣Ce0.9Gd0.1O1.95⏟GDC electrolyte\underbrace{\mathrm{La}_{0.6}\mathrm{Sr}_{0.4}\mathrm{Co}_{0.2}\mathrm{Fe}_{0.8}\mathrm{O}_{3-\delta}}_{\text{LSCF oxygen electrode}} \mid \underbrace{\mathrm{Ce}_{0.9}\mathrm{Gd}_{0.1}\mathrm{O}_{1.95}}_{\text{GDC electrolyte}}

LSCF/GDC interfaces are very relevant to solid-oxide cells and we have elaborated on the motivations underlying this choice in § 3.4.

For the present study, we adopt an experimentally motivated epitaxial relationship in which the interface plane is the (001) plane of both materials:

(001)pcLSCF∥(001)cGDC(001)_{\mathrm{pc}}^{\mathrm{LSCF}} \parallel(001)_{\mathrm{c}}^{\mathrm{GDC}}

where “pc” denotes the pseudocubic representation of LSCF and “c” denotes the cubic fluorite cell of GDC [47].

The two crystals are rotated relative to one another within the interface plane. We choose the in-plane alignment

[100]pcLSCF∥[110]cGDC[100]_{\mathrm{pc}}^{\mathrm{LSCF}} \parallel[110]_{\mathrm{c}}^{\mathrm{GDC}}

and

[010]pcLSCF∥[1ˉ10]cGDC.[010]_{\mathrm{pc}}^{\mathrm{LSCF}} \parallel[\bar{1}10]_{\mathrm{c}}^{\mathrm{GDC}}.

Thus, the LSCF and GDC (001) surfaces remain parallel, while their in-plane crystallographic axes are rotated by 45∘45^\circ.

This rotation provides a favorable lattice match. Representative lattice parameters are approximately [80, 81]

aLSCF,pc≃3.925 A˚,aGDC,c≃5.417 A˚.(54)a_{\mathrm{LSCF,pc}} \simeq3.925\ \text{\AA}, \qquad a_{\mathrm{GDC,c}} \simeq5.417\ \text{\AA}. \tag*{(54)}

Under the 45∘45^\circ in-plane rotation, the relevant GDC periodicity is

aGDC,c2≃3.83 A˚,(55)\frac{a_{\mathrm{GDC,c}}}{\sqrt{2}} \simeq3.83\ \text{\AA}, \tag*{(55)}

which can be compared directly with the LSCF pseudocubic lattice parameter. The resulting lattice mismatch is approximately

ϵ∥≡aLSCF,pc−aGDC,c/2aGDC,c/2≃2.5%.(56)\epsilon_{\parallel} \equiv\frac{a_{\mathrm{LSCF,pc}}-a_{\mathrm{GDC,c}}/\sqrt{2}}{a_{\mathrm{GDC,c}}/\sqrt{2}} \simeq2.5\%. \tag*{(56)}

A commensurate interface supercell can therefore be constructed by repeating the LSCF surface cell twice along each in-plane direction, to ensure that it contains at least one full cell for each crystal. The supercell’s in-plane dimensions are approximately

2aLSCF,pc≃7.85 A˚.(57)2a_{\mathrm{LSCF,pc}} \simeq7.85\ \text{\AA}. \tag*{(57)}

The corresponding GDC surface cell spans approximately

2aGDC,c≃7.66 A˚(58)\sqrt{2}a_{\mathrm{GDC,c}} \simeq7.66\ \text{\AA} \tag*{(58)}

along the matched directions. A common in-plane lattice parameter is then imposed, with the remaining small mismatch accommodated by straining one material.

The out-of-plane thickness is chosen independently. For example, if the LSCF slab contains five pseudocubic cells along the interface normal, the 2×2×52 \times2 \times5 LSCF block contains 20 perovskite formula units. Before introducing oxygen non-stoichiometry, the nominal LSCF composition can therefore be represented explicitly as

12 La,8 Sr,4 Co,16 Fe,60 O.12\ \mathrm{La},\qquad8\ \mathrm{Sr},\qquad4\ \mathrm{Co},\qquad16\ \mathrm{Fe},\qquad60\ \mathrm{O}.

The GDC block is constructed from the fluorite lattice with the same commensurate in-plane periodicity and sufficient thickness to recover bulk-like behavior away from the interface. To represent Ce0.9Gd0.1O1.95\mathrm{Ce}_{0.9}\mathrm{Gd}_{0.1}\mathrm{O}_{1.95}, the number of cation sites should be compatible with the 10% Gd concentration. For example, a block containing 20 cation sites can contain

18 Ce,2 Gd,39 O,18\ \mathrm{Ce},\qquad2\ \mathrm{Gd},\qquad39\ \mathrm{O},

where the missing oxygen provides the charge-compensating oxygen vacancy associated with the two Gd3+\mathrm{Gd}^{3+} substitutions.

The orientation relationship is held fixed in the baseline calculation. Within this orientation, several atomistic degrees of freedom must still be explored. On the LSCF side, the (001) surface can terminate in either an

(La,Sr)O(\mathrm{La},\mathrm{Sr})\mathrm{O}

plane or a

(Co,Fe)O2(\mathrm{Co},\mathrm{Fe})\mathrm{O}_{2}

plane. Corresponding chemically plausible GDC (001) terminations should be constructed, including different interfacial oxygen contents where relevant. For each pair of terminating planes, several lateral registries are generated by translating one surface relative to the other within the interface plane.

The La/Sr, Co/Fe, and Ce/Gd occupations must also be assigned to explicit atomic sites. A pilot calculation may use a low-energy ordered configuration, while production calculations should sample several configurations or use a special quasirandom structure to represent substitutional disorder [82]. Likewise, distinct oxygen-vacancy locations should be considered because their stability depends on the local cation environment and distance from the interface.

Each candidate interface is constructed with a physically reasonable initial separation between the two terminating atomic planes and subsequently relaxed with DFT. The interface separation, local bond lengths, octahedral distortions, and atomic reconstruction are therefore outputs of the structural relaxation rather than fixed parameters of the final model. The relaxed candidate structures are compared using their interface energies, and the lowest-energy structures, together with any relevant near-degenerate alternatives, are retained for the subsequent embedding calculations.

A symmetric periodic supercell can be represented schematically as

bulk-like LSCF layersinterfacial LSCF layerinterfacial GDC layerbulk-like GDC layers.\begin{aligned} &\text{bulk-like LSCF layers}\\ &\text{interfacial LSCF layer}\\ &\text{interfacial GDC layer}\\ &\text{bulk-like GDC layers.} \end{aligned}

The LSCF and GDC regions are made sufficiently thick that the layers farthest from the interface recover their respective bulk-like structural and electronic properties.

Thus, the baseline atomistic construction is fixed to the experimentally motivated orientation relationship while termination, lateral registry, cation ordering, oxygen-vacancy configuration, and the relaxed interface separation constitute the principal atomistic variables explored by the DFT workflow.

Selection of vacancy and migration geometries

The calculation should not assume that one arbitrarily selected oxygen atom is representative. Oxygen sites are first divided into chemically distinct classes according to:

  • distance from the LSCF/GDC interface;

  • identities of neighboring transition-metal cations;

  • local La/Sr or Ce/Gd environment;

  • proximity to an existing dopant-compensating vacancy;

  • local bond lengths and octahedral distortions.

In LSCF, an oxygen atom typically bridges two BB-site cations. Distinct local environments therefore include

Fe−O−Fe,Fe−O−Co,Co−O−Co.\mathrm{Fe}-\mathrm{O}-\mathrm{Fe},\qquad\mathrm{Fe}-\mathrm{O}-\mathrm{Co},\qquad\mathrm{Co}-\mathrm{O}-\mathrm{Co}.

These environments are further distinguished by their distance from the interface and their nearby La/Sr arrangement.

The practical procedure is:

  1. enumerate all symmetry- and chemistry-distinct oxygen sites;

  1. remove one oxygen from each site and relax the resulting structure at the DFT level;

  1. rank the sites by their DFT vacancy-formation energies;

  1. apply the Tier T1 embedding to the lowest-energy sites and to any sites directly relevant to transport across the interface.

For the running example, consider an oxygen atom O∗O^{*} in the LSCF BO2BO_{2} layer closest to GDC, with local coordination

Fe1−O∗−Fe2.\mathrm{Fe}_{1}-O^{*}-\mathrm{Fe}_{2}.

The two principal structures for vacancy formation are then:

gpristine=relaxed LSCF/GDC interface containing O∗,(59)g_{\mathrm{pristine}}=\text{relaxed LSCF/GDC interface containing }O^{*}, \tag*{(59)}

and

gvac=the same interface after removing O∗.(60)g_{\mathrm{vac}}=\text{the same interface after removing }O^{*}. \tag*{(60)}

The vacancy-formation energy is obtained from the converged correlated energies of these two structures through Eq. (1). The selection of an Fe–O–Fe site is only an illustrative pilot choice; the preceding site enumeration determines whether it is in fact one of the relevant low-energy vacancies.

For migration, the initial state is a relaxed structure containing an oxygen vacancy at a particular lattice site. Consider, for example, two neighboring oxygen sites in the ideal cubic perovskite,

O1=(12,12,0),O2=(12,0,12).O_{1}=\left(\frac{1}{2},\frac{1}{2},0\right),\qquad O_{2}=\left(\frac{1}{2},0,\frac{1}{2}\right).

Suppose that O1O_{1} is occupied and O2O_{2} is vacant. The migration event corresponds to the oxygen atom moving from O1O_{1} into the vacancy at O2O_{2}:

(12,12,0)⟶(12,0,12).\left(\frac{1}{2},\frac{1}{2},0\right)\longrightarrow\left(\frac{1}{2},0,\frac{1}{2}\right).

After the hop, O2O_{2} is occupied and O1O_{1} has become the new vacancy site.

The transition state is not another stable lattice configuration and its coordinates are not specified in advance. During migration, the oxygen leaves its equilibrium lattice site and passes through an interstitial-like region between O1O_{1} and O2O_{2}, locally distorting the surrounding crystal. The geometric midpoint,

(12,14,14),\left(\frac{1}{2},\frac{1}{4},\frac{1}{4}\right),

can be used as an initial guess for an intermediate configuration, but the actual migration path generally deviates from this straight-line trajectory as the migrating oxygen and surrounding atoms relax.

A NEB calculation is therefore performed between the known initial and final geometries. Several intermediate atomic configurations are introduced and optimized collectively to obtain the minimum-energy migration path [54]. The highest-energy configuration along this optimized path is the transition-state geometry gTSg_{\mathrm{TS}}. The embedding is then applied to the relaxed initial geometry gISg_{\mathrm{IS}} and the NEB-derived transition-state geometry gTSg_{\mathrm{TS}}, giving the migration barrier

EmigI=ET1(gTS)−ET1(gIS).(61)E_{\mathrm{mig}}^{\mathcal{I}} = E_{\mathrm{T1}}(g_{\mathrm{TS}}) - E_{\mathrm{T1}}(g_{\mathrm{IS}}). \tag*{(61)}

The resulting structural dataset is therefore

G={gpristine,gvac,1,gvac,2,…,gIS,1,gTS,1,…}.(62)\mathcal{G} = \{g_{\mathrm{pristine}}, g_{\mathrm{vac},1}, g_{\mathrm{vac},2}, \ldots, g_{\mathrm{IS},1}, g_{\mathrm{TS},1}, \ldots\}. \tag*{(62)}

References

  1. [1]Bela Bauer, Dave Wecker, Andrew J. Millis, Matthew B. Hastings, and Matthias Troyer. Hybrid quantum-classical approach to correlated materials. Physical Review X, 6(3):031045, 2016. doi: 10.1103/PhysRevX.6.031045.DOI
  2. [2]Shuai He, Yuanfeng Zou, Kongfa Chen, and San P. Jiang. A critical review of key materials and issues in solid oxide cells. Interdisciplinary Materials, 2(2):197–229, 2023. doi: 10.1002/idm2.12068.DOI
  3. [3]Yiping Yang, Jinyong Lei, Xurui Huang, Zihao Liao, Yang Liu, and Zhengkai Tu. Recent development in reversible solid oxide fuel cells: Theory, integration and prospective. Chem-ElectroChem, 11(2):e202300593, 2024. doi: 10.1002/celc.202300593.DOI
  4. [4]U.S. Department of Energy. Solid oxide fuel cells. https://www.energy.gov/hgeo/solid-oxide-fuel-cells, 2026. Accessed 2026-07-30.
  5. [5]U.S. Department of Energy. Technical targets for high temperature electrolysis. https://www.energy.gov/cmei/fuels/technical-targets-high-temperature-electrolysis, 2026. Accessed 2026-07-30.
  6. [6]U.S. Department of Energy. Project selections for foa 2300: Small-scale solid oxide fuel cell systems and hybrid electrolyzer technology development, 2020. URL https://www.energy.gov/hgeo/articles/project-selections-foa-2300.
  7. [7]U.S. Department of Energy. Doe announces $4 million to advance solid oxide fuel cell technology for clean, low-cost hydrogen production, 2024. URL https://www.energy.gov/hgeo/articles/doe-announces-4-million-advance-solid-oxide-fuel-cell-technology-clean-low-cost.
  8. [8]Suguru Takahashi, Shunsuke Nishimoto, Motohide Matsuda, and Michihiro Miyake. Electrode properties of the ruddlesden–popper series, Laₙ₊₁NiₙO₃ₙ₊₁ (n = 1, 2, 3), as intermediate- temperature solid oxide fuel cells. Journal of the American Ceramic Society, 93(8):2329–2333, 2010. doi: 10.1111/j.1551-2916.2010.03743.x.
  9. [9]Jamila Nisar, Gurpreet Kaur, Sarbjit Giddey, Suresh Bhargava, and Lathe Jones. Cathode materials for intermediate temperature solid oxide fuel cells. Fuels, 5(4):805–824, 2024. doi: 10.3390/fuels5040045.DOI
  10. [10]Gabriel Kotliar, Sergej Y. Savrasov, Kristjan Haule, Viktor S. Oudovenko, Olivier Parcollet, and C. A. Marianetti. Electronic structure calculations with dynamical mean-field theory. Reviews of Modern Physics, 78(3):865–951, 2006. doi: 10.1103/RevModPhys.78.865.DOI
  11. [11]Karsten Held. Electronic structure calculations using dynamical mean field theory. Advances in Physics, 56(6):829–926, 2007. doi: 10.1080/00018730701619647.DOI
  12. [12]Eric B. Isaacs and Chris A. Marianetti. Compositional phase stability of correlated electron materials within dft+dmft. Physical Review B, 102(4):045146, 2020. doi: 10.1103/PhysRevB.102.045146.DOI
  13. [13]Chih-Chung Yang, Wen-Cheng J. Wei, and Andreas Roosen. Reaction kinetics and mechanisms between La₀.₆₅Sr₀.₃₀MnO₃ and 8 mol% yttria-stabilized zirconia. Journal of the American Ceramic Society, 87(6):1110–1116, 2004. doi: 10.1111/j.1551-2916.2004.01110.x.
  14. [14]S. Biermann, F. Aryasetiawan, and A. Georges. First-principles approach to the electronic structure of strongly correlated systems: Combining the GW approximation and dynamical mean-field theory. Physical Review Letters, 90(8):086402, 2003. doi: 10.1103/PhysRevLett.90.086402.
  15. [15]Alexei A. Kananenka, Emanuel Gull, and Dominika Zgid. Systematically improvable multiscale solver for correlated electron systems. Physical Review B, 91(12):121111(R), 2015. doi: 10.1103/PhysRevB.91.121111.
  16. [16]D. Hu et al. Enhanced long-term cathode stability by tuning interfacial nanocomposite for intermediate temperature solid oxide fuel cells. Advanced Materials Interfaces, 9(14):2102131, 2022. doi: 10.1002/admi.202102131.
  17. [17]Hyowon Park, Andrew J. Millis, and Chris A. Marianetti. Computing total energies in complex materials using charge self-consistent dft+dmft. Physical Review B, 90(23):235103, 2014. doi: 10.1103/PhysRevB.90.235103.
  18. [18]Hung T. Dang, Andrew J. Millis, and Chris A. Marianetti. Covalency and the metal-insulator transition in titanate and vanadate perovskites. Physical Review B, 89(16):161113(R), 2014. doi: 10.1103/PhysRevB.89.161113.DOI
  19. [19]Kristjan Haule. Exact double counting in combining the dynamical mean-field theory and the density functional theory. Physical Review Letters, 115(19):196403, 2015. doi: 10.1103/PhysRevLett.115.196403.
  20. [20]Alexander A. Rusakov, Sergei Iskakov, Lan Nguyen Tran, and Dominika Zgid. Self-energy embedding theory (SEET) for periodic systems. Journal of Chemical Theory and Computation, 15(1):229–240, 2019. doi: 10.1021/acs.jctc.8b00927.DOI
  21. [21]Sergei Iskakov, Chia-Nan Yeh, Emanuel Gull, and Dominika Zgid. Ab initio self-energy embedding for the photoemission spectra of NiO and MnO. Physical Review B, 102(8):085105, 2020. doi: 10.1103/PhysRevB.102.085105.DOI
  22. [22]M. Casula, Ph. Werner, L. Vaugier, F. Aryasetiawan, T. Miyake, A. J. Millis, and S. Biermann. Low-energy models for correlated materials: Bandwidth renormalization from Coulombic screening. Physical Review Letters, 109:126408, 2012. doi: 10.1103/PhysRevLett.109.126408.DOI
  23. [23]Hiroshi Shinaoka, Yusuke Nomura, Silke Biermann, Matthias Troyer, and Philipp Werner. Negative sign problem in continuous-time quantum Monte Carlo: Optimal choice of single-particle basis for impurity problems. Physical Review B, 92:195126, 2015. doi: 10.1103/PhysRevB.92.195126.DOI
  24. [24]Philipp Werner, Michele Casula, Takashi Miyake, Ferdi Aryasetiawan, Andrew J. Millis, and Silke Biermann. Satellites and large doping- and temperature-dependence of electronic properties in hole-doped BaFe₂As₂. Nature Physics, 8:331–337, 2012.DOI
  25. [25]Karim Steiner, Yusuke Nomura, and Philipp Werner. Double-expansion impurity solver for multiorbital models with dynamically screened u and j. Phys. Rev. B, 92:115123, Sep 2015. doi: 10.1103/PhysRevB.92.115123. URL https://link.aps.org/doi/10.1103/PhysRevB.92.115123.DOI
  26. [26]Eitan Eidelstein, Emanuel Gull, and Guy Cohen. Multiorbital quantum impurity solver for general interactions and hybridizations. Physical Review Letters, 124:206405, 2020. doi: 10.1103/PhysRevLett.124.206405.DOI
  27. [27]Hugo U. R. Strand, Joseph Kleinhenz, and Igor Krivenko. Inchworm quasi monte carlo for quantum impurities. Physical Review B, 110:L121120, 2024.
  28. [28]Paola Costamagna, Paolo Costa, and Vincenzo Antonucci. Micro-modelling of solid oxide fuel cell electrodes. Electrochimica Acta, 43(3–4):375–394, 1998. doi: 10.1016/S0013-4686(97)00063-7.DOI
  29. [29]Stuart B. Adler, J. A. Lane, and B. C. H. Steele. Electrode kinetics of porous mixed-conducting oxygen electrodes. Journal of The Electrochemical Society, 143(11):3554–3564, 1996. doi: 10.1149/1.1837252.DOI
  30. [30]Jakob E. Mortensen, Martin Søgaard, and Torben Jacobsen. Analytical, 1-dimensional impedance model of a composite solid oxide fuel cell cathode. Journal of The Electrochemical Society, 161(3):F161–F175, 2014. doi: 10.1149/2.077401jes.
  31. [31]Vishwas Goel, Dalton Cox, Scott A. Barnett, and Katsuyo Thornton. Simulation of the electrochemical impedance in a three-dimensional, complex microstructure of solid oxide fuel cell cathode and its application in the microstructure characterization. Frontiers in Chemistry, 9:627699, 2021. doi: 10.3389/fchem.2021.627699.DOI
  32. [32]Silvère Panisset, Mónica Burriel, Jérôme Laurencin, and David Jauffres. Modelling of solid oxide cell oxygen electrodes. Journal of Physics: Energy, 5(2):022003, 2023. doi: 10.1088/2515-7655/acc5b1.DOI
  33. [33]Silvère Panisset, A. Riaz, A. Stangl, Mónica Burriel, and David Jauffrès. Contribution of numerical modelling to design oxygen electrode for micro-solid oxide cells: A case study of high-performance nano-columnar la2nio4 thin films. Journal of Power Sources, 593:233951, 2024. doi: 10.1016/j.jpowsour.2023.233951.DOI
  34. [34]International Energy Agency. Electrolysers. https://www.iea.org/energy-system/low-emissions-fuels/electrolysers, 2024. Accessed 2026-07-30.
  35. [35]International Energy Agency. Global hydrogen review 2024. https://www.iea.org/reports/global-hydrogen-review-2024, 2024. Accessed 2026-07-30.DOI
  36. [36]Jr. Chase, Malcolm W. NIST-JANAF Thermochemical Tables. Number 9 in Journal of Physical and Chemical Reference Data, Monograph. American Institute of Physics, 4 edition, 1998. ISBN 978-1-56396-831-0. URL https://janaf.nist.gov/.
  37. [37]L. Wang, T. Maxisch, and G. Ceder. Oxidation energies of transition metal oxides within the GGA+U framework. Physical Review B, 73:195107, 2006. doi: 10.1103/PhysRevB.73.195107.
  38. [38]Kristjan Haule and Turan Birol. Free energy from stationary implementation of the dft+dmft functional. Physical Review Letters, 115:256402, 2015. doi: 10.1103/PhysRevLett.115.256402.DOI
  39. [39]C.-O. Almbladh, U. von Barth, and R. van Leeuwen. Variational total energies from Φ- and Ψ-derivable theories. International Journal of Modern Physics B, 13(5n06):535–541, 1999. doi: 10.1142/S0217979290000436.DOI
  40. [40]Dominika Zgid and Emanuel Gull. Finite temperature quantum embedding theories for correlated systems. New Journal of Physics, 19(2):023047, 2017. doi: 10.1088/1367-2630/aa5d34.DOI
  41. [41]Jiaqing Jiang, Nathan Ju, Ojas Parekh, Chaithanya Rayudu, and Andrew Zhao. Polynomial-time classical and quantum simulation of quantum impurity models, 2026. URL https://arxiv.org/abs/2610.02167.
  42. [42]Srinivasan Arunachalam, Sergey Bravyi, Anirban Chowdhury, Arkopal Dutt, Alexandru Gheorghiu, and Zhi Li. Quantum impurity models: easy at equilibrium, universal in motion, 2026. URL https://arxiv.org/abs/2610.02130.
  43. [43]Junichiro Mizusaki, Yasuo Mima, Shigeru Yamauchi, Kazuo Fueki, and Hiroaki Tagawa. Non-stoichiometry of the perovskite-type oxides La₁₋ₓSrₓCoO₃₋δ. Journal of Solid State Chemistry, 80(1):102–111, 1989. doi: 10.1016/0022-4596(89)90036-4.DOI
  44. [44]Shin-ichi Hashimoto, Yasuhiro Fukuda, Melanie Kuhn, Kazuhisa Sato, Keiji Yashiro, and Junichiro Mizusaki. Oxygen nonstoichiometry and thermo-chemical stability of La₀.₆Sr₀.₄Co₁₋ᵧFeᵧO₃₋δ (y = 0.2, 0.4, 0.6, 0.8). Solid State Ionics, 181(37–38):1713–1719, 2010. doi: 10.1016/j.ssi.2010.09.024.DOI
  45. [45]Daisuke Asakura, Tomohiro Ishiyama, Eiji Hosono, Katherine Develos-Bagarinao, Katsuhiko Yamaji, Masaki Kobayashi, Miho Kitamura, Koji Horiba, and Haruo Kishimoto. Investigation of the interface structure and electronic state of nanocomposite La0.6Sr0.4Co0.2Fe0.8O3-delta and Ce0.9Gd0.1O2-delta electrodes for solid oxide fuel cells. Journal of Materials Chemistry A, 14:8857–8865, 2026. doi: 10.1039/D5TA05378A.
  46. [46]Zhi-Peng Li, Toshiyuki Mori, Graeme John Auchterlonie, Jin Zou, and John Drennan. Mutual diffusion occurring at the interface between La0.6Sr0.4Co0.8Fe0.2O3 cathode and gd-doped ceria electrolyte during IT-SOFC cell preparation. ACS Applied Materials & Interfaces, 3(7): 2772–2778, 2011. doi: 10.1021/am2005543.DOI
  47. [47]Dongkyu Lee, Yueh-Lin Lee, Xiao Renshaw Wang, Dane Morgan, and Yang Shao-Horn. Enhancement of oxygen surface exchange on epitaxial La0.6Sr0.4Co0.2Fe0.8O3-delta thin films using advanced heterostructured oxide interface engineering. MRS Communications, 6(3): 204–209, 2016. doi: 10.1557/mrc.2016.28.DOI
  48. [48]Denis Gryaznov, Mike W. Finnis, Robert A. Everastov, and Joachim Maier. Oxygen vacancy formation energies in Sr-doped complex perovskites: ab initio thermodynamic study. arXiv preprint arXiv:1206.6242, 2012.arxiv.org/abs/1206.6242
  49. [49]Wei Wei, Florian Fuchs, Andreas Zienert, Xiao Hu, and Jörg Schuster. First-principles analysis of the effect of magnetic states on the oxygen vacancy formation energy in doped La0.5Sr0.5CoO3 perovskite. arXiv preprint arXiv:2507.07614, 2025.DOI
  50. [50]P. Augustinský, V. Krápek, and J. Kuneš. Doping induced spin state transition in LaCoO3: dynamical mean-field study. Physical Review Letters, 110(26):267204, 2013. doi: 10.1103/PhysRevLett.110.267204.DOI
  51. [51]Bismayan Chakrabarti, Turan Birol, and Kristjan Haule. Role of entropy and structural parameters in the spin-state transition of LaCoO3. Physical Review Materials, 1(6):064403, 2017. doi: 10.1103/PhysRevMaterials.1.064403.DOI
  52. [52]Antoine Georges, Gabriel Kotliar, Werner Krauth, and Marcelo J. Rozenberg. Dynamical mean-field theory of strongly correlated fermion systems and the limit of infinite dimensions. Reviews of Modern Physics, 68(1):13–125, 1996. doi: 10.1103/RevModPhys.68.13.DOI
  53. [53]Markus Aichhorn, Leonid Pourovskii, Priyanka Seth, Veronica Vildosola, Manuel Zingl, Oleg E. Peil, Xiaoyu Deng, Jernej Mravlje, Gernot J. Kraberger, Cyril Martins, Michel Ferrero, and Olivier Parcollet. TRIQS/DFTTools: A TRIQS application for ab initio calculations of correlated materials. Computer Physics Communications, 204:200–208, 2016. doi: 10.1016/j.cpc.2016.03.014.DOI
  54. [54]Graeme Henkelman, Blas P. Uberuaga, and Hannes Jónsson. A climbing image nudged elastic band method for finding saddle points and minimum energy paths. The Journal of Chemical Physics, 113(22):9901–9904, 2000. doi: 10.1063/1.1329672.DOI
  55. [55]Nicola Marzari, Arash A. Mostofi, Jonathan R. Yates, Ivo Souza, and David Vanderbilt. Maximally localized wannier functions: Theory and applications. Reviews of Modern Physics, 84(4):1419–1475, 2012. doi: 10.1103/RevModPhys.84.1419.DOI
  56. [56]Jonathan Karp, Alexander Hampel, and Andrew J. Millis. Dependence of DFT+DMFT results on the construction of the correlated orbitals. Physical Review B, 103(19):195101, 2021. doi: 10.1103/PhysRevB.103.195101.DOI
  57. [57]F. Aryasetiawan, M. Imada, A. Georges, G. Kotliar, S. Biermann, and A. I. Lichtenstein. Frequency-dependent local interactions and low-energy effective models from electronic structure calculations. Physical Review B, 70(19):195104, 2004. doi: 10.1103/PhysRevB.70.195104.DOI
  58. [58]Philipp Werner and Andrew J. Millis. Dynamical screening in correlated electron materials. Physical Review Letters, 104(14):146401, 2010. doi: 10.1103/PhysRevLett.104.146401.DOI
  59. [59]Chi-Fang Chen, Michael J. Kastoryano, and Andrés Gilén. An efficient and exact noncommutative quantum Gibbs sampler, 2023. URL https://arxiv.org/abs/2311.09207.
  60. [60]Mario Motta, Chong Sun, Adrian T. K. Tan, Matthew J. O’Rourke, Erika Ye, Austin J. Minnich, Fernando G. S. L. Brandao, and Garnet Kin-Lic Chan. Determining eigenstates and thermal states on a quantum computer using quantum imaginary time evolution. Nature Physics, 16:205–210, 2020. doi: 10.1038/s41567-019-0704-4.DOI
  61. [61]Kristjan Haule and Gheorghe L. Pascut. Forces for structural optimizations in correlated materials within a dft+embedded dmft functional approach. Physical Review B, 94:195146, 2016. doi: 10.1103/PhysRevB.94.195146.DOI
  62. [62]Evgeny Plekhanov, Nicola Bonini, and Cedric Weber. Calculating dynamical mean-field theory forces in ab initio ultrasoft pseudopotential formalism. Physical Review B, 104:235131, 2021. doi: 10.1103/PhysRevB.104.235131.DOI
  63. [63]Thomas E. O’Brien, Bruno Senjean, Ramiro Sagastizabal, Xavier Bonet-Monroig, Alicja Dutkiewicz, Francesco Buda, Leonardo DiCarlo, and Lucas Visscher. Calculating energy derivatives for quantum chemistry on a quantum computer. npj Quantum Information, 5:113, 2019. doi: 10.1038/s41534-019-0213-4.DOI
  64. [64]Thomas E. O’Brien, Michael Streif, Nicholas C. Rubin, Raffaele Santagati, Yuan Su, William J. Huggins, Joshua J. Goings, Nikolaj Moll, Elica Kyoseva, Matthias De Groote, Christofer S. Tautermann, Joonho Lee, Dominic W. Berry, Nathan Wiebe, and Ryan Babbush. Efficient quantum computation of molecular forces and other energy gradients. Physical Review Research, 4:043210, 2022. doi: 10.1103/PhysRevResearch.4.043210.DOI
  65. [65]Stuart B. Adler. Mechanism and kinetics of oxygen reduction on porous lal-xsrxco3-delta electrodes. Solid State Ionics, 111:125–134, 1998. doi: 10.1016/S0167-2738(98)00179-9.
  66. [66]Andreas E. Bumberger, Andreas Nenning, and Juergen Fleig. Transmission line revisited – the impedance of mixed ionic and electronic conductors. Physical Chemistry Chemical Physics, 26:15068–15089, 2024. doi: 10.1039/D4CP00975D.DOI
  67. [67]Barbara Buxbaum, Andreas Egger, Johanna Kramer-Schöggl, Fereshteh Falah Chamase-mani, Roland Brunner, and Edith Bucher. Electrochemical performance and advanced 3d reconstruction of LSCF-GDC air electrodes for solid oxide electrolysis cells. Journal of Power Sources, 657:238174, 2025. doi: 10.1016/j.jpowsour.2025.238174. URL https://doi.org/10.1016/j.jpowsour.2025.238174.
  68. [68]Katherine E. Ayers and Olga A. Marina. State of the art in low-temperature and high-temperature electrolysis. MRS Bulletin, 49(12):1226–1234, 2024. doi: 10.1557/s43577-024-00806-6. URL https://link.springer.com/article/10.1557/s43577-024-00806-6.DOI
  69. [69]Bloom Energy. Bloom energy server data sheet, 2026. URL https://www.bloomenergy.com/resource/bloom-energy-server/. Bloom Energy reports more than 1.5 GW deployed across more than 1,200 sites globally.
  70. [70]Bloom Energy. Bloom energy and oracle expand strategic partnership to deploy up to 2.8 gw to accelerate ai infrastructure build-out, April 2026. URL https://www.bloomenergy.com/news/bloom-energy-and-oracle-expand-strategic-partnership-to-deploy-up-to-2-8-gw-to-accelerate-ai-infrastructure-build-out/.
  71. [71]BCC Research. Solid oxide fuel cells: Technologies and global markets. Technical Report EGY048F, BCC Research, November 2025. URL https://www.bccresearch.com/market-research/energy-and-resources/solid-oxide-fuel-cells-tech-markets-report.html. Global SOFC market projected to grow from USD 3.2 billion in 2025 to USD 9.6 billion in 2030, at a 24.4% CAGR.
  72. [72]Matt Langione, Corban Tillemann-Dick, Amit Kumar, and Vikas Taneja. Where will quantum computers create value—and when? Boston Consulting Group, May 2019. URL https://www.bcg.com/publications/2019/quantum-computers-create-value-when. Published May 13, 2019.
  73. [73]Matt Langione, Hanl Park, Jean-François Bobier, Brad Henderson, Harley T. Johnson, Sesh Iyer, and Zheng Cui. Quantum is getting real. ceos need to shape where it creates value. Boston Consulting Group, June 2026. URL https://www.bcg.com/publications/2026/ceos-need-to-shape-where-quantum-creates-value. Published June 4, 2026.
  74. [74]Grand View Research. Stationary solid oxide fuel cell market statistics, 2026. URL https://www.grandviewresearch.com/horizon/statistics/solid-oxide-fuel-cell-market/application/stationary/global. Global stationary SOFC market projected to reach USD 10.13 billion by 2033.
  75. [75]Max Ludwig, Martin Lüers, Markus Lorenz, Esben Hegnsholt, Minjee Kim, Cornelius Pieper, and Katharina Meidert. The green tech opportunity in hydrogen. Boston Consulting Group, 2021. URL https://www.bcg.com/publications/2021/capturing-value-in-the-low-carbon-hydrogen-market.
  76. [76]Souvik Paul, Diana Iuşan, Patrik Thunström, Yaroslav O. Kvashnin, Johan Hellsvik, Manuel Pereiro, Anna Delin, Ronny Knut, Dibya Phuyal, Andreas Lindblad, Olof Karis, Biplab Sanyal, and Olle Eriksson. Investigation of the spectral properties and magnetism of BiFeO3 by dynamical mean-field theory. Physical Review B, 97(12):125120, 2018. doi: 10.1103/PhysRevB.97.125120.DOI
  77. [77]Ruiwen Xie and Hongbin Zhang. Mixed valence nature of the ce 4f state in ceco5 based on spin-polarized dft+dmft calculations. Physical Review B, 106:224411, 2022. doi: 10.1103/PhysRevB.106.224411.DOI
  78. [78]Mois I. Aroyo, editor. International Tables for Crystallography, Volume A: Space-Group Symmetry. International Union of Crystallography, 6 edition, 2016. ISBN 978-0-470-97423-0. doi: 10.1107/97809553602060000114. URL https://doi.org/10.1107/97809553602060000114.
  79. [79]A. Zur and T. C. McGill. Lattice match: An application to heteroepitaxy. Journal of Applied Physics, 55(2):378–386, 1984. doi: 10.1063/1.333084.DOI
  80. [80]John S. Hardy, Jared W. Templeton, Danny J. Edwards, Zigui Lu, and Jeffry W. Stevenson. Lattice expansion of LSCF-6428 cathodes measured by in-situ XRD during SOFC operation. Journal of Power Sources, 198:76–82, 2012. doi: 10.1016/j.jpowsour.2011.09.099.DOI
  81. [81]Ho Chang Lee, Jung A. Lee, Joon Hyung Lee, Young Woo Heo, and Jeong Joo Kim. Ionic conductivity and relaxations of in-doped GDC (gadolinium-doped ceria) ceramics. Ceramics International, 43(15):11792–11798, 2017. doi: 10.1016/j.ceramint.2017.06.018.DOI
  82. [82]S.-H. Wei, L. G. Ferreira, James E. Bernard, and Alex Zunger. Electronic properties of random alloys: Special quasirandom structures. Physical Review B, 42(15):9622–9649, 1990. doi: 10.1103/PhysRevB.42.9622.DOI

Paper details

vlnc:W_27u47epf
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents