betaFeedback

WorksPhysics and Astronomy

Quantum change point metrology

Abstract

We quantify the extra Bayes risk of locating a quantum change point and estimating its amplitude with one measurement. The joint and marginal optimizations use the full record and the same joint prior, with both parameters unknown. For product records on a known pure state curve, position has clipped absolute loss in resolution units, and amplitude offset has squared loss in fixed calibrated units. Ideal steps exhibit certified conflict at finite signal strength, including in phase records of sixteen qubits, and recover both informative marginal optima at strong signal. For finite offset prior width, a retained quantum boundary region serves position, and the remaining suffix serves amplitude. Physical recovery holds when strength grows more slowly than the square root of record length. Known smooth rises also admit leading recovery in the coherent experiment as strength grows and width shrinks. For the quintic profile, we establish two residual cost scaling laws. The residual cost is Θ(s−2)Θ(s^{-2}) as s→∞s\to\infty. Taking the strong signal limit at fixed ww yields a limiting cost of Θ(w3)Θ(w^3) as w→0w\to0. In the resolved local model, quadratic position loss admits a common optimum within the covariant class. These results link onset geometry and decision loss to Bayesian measurement compatibility in quantum change point estimation.

Introduction

A quantum sensor record can encode both when a signal begins and how strongly it acts. Estimating these quantities connects change point detection with quantum sensing and metrology [1–4]. For an abrupt onset, moving the boundary changes a short segment of the record, while changing the amplitude affects the whole suffix. This spatial structure offers a way to allocate information between the two tasks. The question is how much precision a common readout can retain for each.

Quantum change point studies have established identification with minimum error [5], exact identification with inconclusive outcomes [6], and sequential local strategies [7]. Related settings include boundaries between unknown domain states [8], multiple anomalies [9], and sequential detection delay [10, 11]. Here, the amplitude that makes the boundary distinguishable is also an estimation target. Each unknown parameter affects the information available for estimating the other, connecting the problem to nuisance parameters and semiparametric estimation [12, 13]. Measurement compatibility determines whether local precision limits for several parameters can be attained by one readout [14–16]. Quantum Fisher information and multiparameter bounds relate local distinguishability to estimation precision [17–23]. Bayesian studies characterize incompatibility [24], derive bounds from monotone metrics [25], and optimize projective readouts [26]. Classical change point theory relates localization to jump size and transition width [27, 28]. For quantum change point records, the central question is how onset geometry and decision loss determine the common readout cost and its asymptotic scaling.

Within Bayesian decision theory [29–33], we define the common readout cost as the weighted joint optimum minus the weighted marginal optima. All three optimizations use the full record, the same joint prior and complete measurement class, with both parameters unknown. The model consists of product records on a known smooth curve of pure states, with independent uniform priors on position and a calibrated amplitude offset (Figure 1). Position has clipped absolute loss in resolution units, and the offset has squared loss in fixed calibrated units. A common optimum exists precisely when the positive operator valued measure (POVM) that is optimal for position commutes with the optimal amplitude observable. Quantum local asymptotic normality and Gaussian equivalence provide a framework for comparisons with coherent state models [34–36]. We use these comparisons to control the optimal joint risk and both optimal marginal risks.

Quantum record and onset profiles

Figure 1. Quantum record and onset profiles. (a) The illustrative phase family ∣ϕ(θ)⟩=(∣0⟩+eiθ∣1⟩)/2|\phi(\theta)\rangle= (|0\rangle+ e^{i\theta}|1\rangle)/\sqrt{2}. Sites 1,…,k−11,\ldots,k-1 are in ρ(0)\rho(0) and sites k,…,nk,\ldots,n in ρ(θ)\rho(\theta), with first changed site k=⌊nu⌋+1k=\lfloor nu\rfloor+1. (b) Normalized profiles for an ideal step and a smooth rise F((t−u)/w)F((t-u)/w), with unknown onset uu and known width ww.

We certify a positive common readout cost for the ideal step at a reference signal strength, including for phase records of sixteen qubits. As signal strength grows, a common readout recovers both marginal optima. Recovery assigns a retained quantum boundary region to position and the remaining suffix to amplitude. With the offset prior fixed at any finite positive width, physical recovery holds along sn→∞s_n \to\infty with sn=o(n)s_n=o(\sqrt{n}), where nn is the record length. Both marginal optimal risks remain bounded away from zero, as do the risk reductions relative to using the prior alone. For known smooth rise profiles, the coherent experiment also admits recovery to leading order as the signal strengthens and the rise width shrinks. For a quintic rise of known width ww, we obtain two scaling laws for the residual cost. The residual cost is Θ(s−2)\Theta(s^{-2}) as s→∞s \to\infty, uniformly for s2w∈[1/2,2]s^2w \in[1/2,2]. Taking the strong signal limit at fixed ww yields a limiting cost of Θ(w3)\Theta(w^3) as w→0w \to0. For quadratic position loss in the resolved local experiment, a readout based on amplitude prediction attains both marginal optima within the complete covariant class. With clipped absolute position loss, the optimal readout requires a cubic correction whose squared contribution accounts for the cubic width law under the full position prior.

Section 2 defines the model and estimation task, and Section 3 presents the main results and their mechanisms. Section 4 presents numerical conflict certificates and comparisons with physical records. The Supplementary Material contains the proofs and certificate error budgets.

Model and estimation task

Quantum record and prior information

The quantum record contains nn systems with the same finite dimensional Hilbert space H\mathcal{H}. An unknown boundary uu marks the onset of a response controlled by an unknown calibrated amplitude offset zz. The known response curve ϕ(θ)\phi(\theta) consists of normalized pure states and is C3C^3 in norm on [−r0,r0][-r_0,r_0]. Define the state and the squared projective speed at θ=0\theta=0 by

ρ(θ)=∣ϕ(θ)⟩⟨ϕ(θ)∣,q0=∥(I−ρ(0))ϕ′(0)∥2>0.(1)\rho(\theta)=\lvert\phi(\theta)\rangle\langle\phi(\theta)\rvert, \qquad q_0=\lVert(I-\rho(0))\phi'(0)\rVert^2>0. \tag*{(1)}

The positive constant q0q_0 sets the local scale of the curve parameter.

Let L∈(0,∞)L\in(0,\infty) be the known half width of the offset prior. Position and amplitude offset have independent uniform priors,

(u,z)∼Unif⁡[0,1]⊗Unif⁡[−L,L].(2)(u,z)\sim\operatorname{Unif}[0,1]\otimes\operatorname{Unif}[-L,L]. \tag*{(2)}

We fix the calibration a=2log⁡2a=2\sqrt{\log2}, sc=3a/2s_c=3a/2 and K=sc2K=s_c^2. All algorithms are natural. The signal center s>0s>0 is known. The offset zz determines the calibrated strength h=s+azh=s+az, which is the coherent field amplitude in the comparison below. The physical curve parameter is θ=h/nq0\theta=h/\sqrt{nq_0}.

For an ideal step, define kn(u)=⌊nu⌋+1k_n(u)=\lfloor nu\rfloor+1. The state on H⊗n\mathcal{H}^{\otimes n} is

ρn(u,z;s)=ρ(0)⊗(kn−1)⊗ρ(θ)⊗(n−kn+1).(3)\rho_n(u,z;s)=\rho(0)^{\otimes(k_n-1)}\otimes\rho(\theta)^{\otimes(n-k_n+1)}. \tag*{(3)}

When u<1u<1, the unchanged sites 1,…,kn−11,\ldots,k_n-1 precede the first unchanged site knk_n. Under the position prior, knk_n is uniform on {1,…,n}\{1,\ldots,n\}; the zero-mass endpoint u=1u=1 represents the unchanged auxiliary state. The position target for a finite record is un=(kn−1)/nu_n=(k_n-1)/n. Reports lie in Xn={0,1/n,…,(n−1)/n}\mathcal{X}_n=\{0,1/n,\ldots,(n-1)/n\}, and xx gives the site estimate k^=nx+1\hat{k}=nx+1.

The condition (s+aL)/nq0≤r0(s+aL)/\sqrt{nq_0}\le r_0 ensures that the full physical parameter interval lies within the domain of the known curve. Where a construction requires a strictly positive amplitude hh, the additional condition s>aLs>aL is imposed.

The coherent comparison experiment is defined on bosonic Fock space over L2[0,1]L^2[0,1] by

σs(u,z)=∣fu,h⟩⟨fu,h∣coh,fu,h=h1[u,1].(4)\sigma_s(u,z)=\lvert f_{u,h}\rangle\langle f_{u,h}\rvert_{\mathrm{coh}}, \qquad f_{u,h}=h\mathbf{1}_{[u,1]}. \tag*{(4)}

It retains the same prior on (u,z)(u,z), but has continuous location target uu and report space X∞=[0,1]\mathcal{X}_\infty= [0,1]. For normalized coherent vectors, the squared fidelity is Fid⁡(∣f⟩,∣g⟩)=e−∥f−g∥2\operatorname{Fid}(|f\rangle,|g\rangle)=e^{-\lVert f-g\rVert^2}. Distance is measured by the half trace distance D(ρ,σ)=∥ρ−σ∥1/2D(\rho,\sigma)=\lVert\rho-\sigma\rVert_1/2, which for these pure states satisfies D=1−Fid⁡D=\sqrt{1-\operatorname{Fid}}.

Common measurement and calibrated losses

A complete POVM M(dx,dy)M(dx,dy) produces paired reports x∈Xx\in\mathcal{X} for position and y∈[−L,L]y\in[-L,L] for the calibrated offset zz, where X\mathcal{X} denotes the report space of the chosen experiment. Completeness is expressed by

M(dx,dy)≥0,∫X×[−L,L]M(dx,dy)=I.M(dx,dy)\geq0,\qquad\int_{\mathcal{X}\times[-L,L]}M(dx,dy)=I.

The measurement design depends only on the known model, prior and task weight. The POVM description covers adaptive strategies based on observed outcomes and retained quantum systems, together with randomized and ancillary implementations. Every outcome (x,y)(x,y) is scored for both tasks, both risks are averaged over the full outcome distribution.

The resolution in the location loss is set by the known signal center. Define b(θ)=1−∣⟨ϕ(0),ϕ(θ)⟩∣2b(\theta)=1-\lvert\langle\phi(0),\phi(\theta)\rangle\rvert^2 and

bn(s)=b(s/nq0),τn(s)=nbn(s).(5)b_n(s)=b\left(s/\sqrt{nq_0}\right),\qquad\tau_n(s)=nb_n(s). \tag*{(5)}

Position error is scored by clipped absolute loss in resolution units, and amplitude offset error by squared loss in fixed units:

ℓloc,n(x,u)=2min⁡{1,τn(s)∣x−un∣/K},ℓloc,∞(x,u)=2min⁡{1,s2∣x−u∣/K},ℓamp(y,z)=(y−z)2,y∈[−L,L].(6)\begin{aligned} \ell_{\mathrm{loc},n}(x,u)&=2\min\{1,\tau_n(s)\lvert x-u_n\rvert/K\},\\ \ell_{\mathrm{loc},\infty}(x,u)&=2\min\{1,s^2\lvert x-u\rvert/K\},\\ \ell_{\mathrm{amp}}(y,z)&=(y-z)^2,\qquad y\in[-L,L]. \tag*{(6)} \end{aligned}

Amplitude reports may be clipped to [−L,L][-L,L] without increasing the loss. The bounds for location and amplitude are Bloc=2B_{\mathrm{loc}}=2 and Bamp=4L2B_{\mathrm{amp}}=4L^2, respectively. At s=scs=s_c, the coherent location loss becomes 2∣x−u∣2\lvert x-u\rvert. For finite records, bn(s)∣k^−kn∣b_n(s)\lvert\hat{k}-k_n\rvert expresses position error in the same resolution units, whereas the physical parameter estimate θ^=(s+ay)/nq0\hat{\theta}=(s+ay)/\sqrt{nq_0} has squared error a2(y−z)2/(nq0)a^2(y-z)^2/(nq_0) under a physical prior of half width aL/nq0aL/\sqrt{nq_0}.

We compare prior widths while keeping aa, ss, q0q_0, KK and the loss units fixed. Along physical recovery paths, we take sn→∞s_n\to\infty with sn=o(n)s_n=o(\sqrt{n}) and keep the state curve, offset prior and amplitude units fixed. The physical displacement θ\theta then vanishes at each site, while the prior spread in zz remains fixed and position errors are scored in resolution units.

Bayesian risks and the cost of a common readout

For either experiment, write ωu,z\omega_{u,z} for the input state and ℓj\ell_j for the loss associated with j∈{loc,amp}j\in\{\mathrm{loc},\mathrm{amp}\}. The Bayes risk of a paired POVM, averaged over the joint prior in (2), is

rj(M)=Eu,z∫X×[−L,L]ℓjTr⁡[ωu,zM(dx,dy)].r_j(M)=\mathbb{E}_{u,z}\int_{\mathcal{X}\times[-L,L]}\ell_j\operatorname{Tr}[\omega_{u,z}M(dx,dy)].

Here ℓloc\ell_{\mathrm{loc}} depends on (x,u)(x,u) and ℓamp\ell_{\mathrm{amp}} on (y,z)(y,z). The minimum Bayes risk for task jj is rj⋆=inf⁡Mrj(M)r_j^\star=\inf_M r_j(M) and optimizes task jj over the full record and joint prior, averaging over unknown zz for position and unknown uu for amplitude. Appending a fixed report xx for the other task embeds each single task measurement in the paired class, so all three optimizations use the same complete measurements.

References

  1. [39]Y. C. Eldar, A. Megretski, and G. C. Verghese, “Designing optimal quantum detectors via semidefinite programming,” IEEE Trans. Inf. Theory 49, 1007–1012 (2003), doi:10.1109/TIT.2003.809510.DOI
  2. [40]C. W. Helstrom, “Quantum detection and estimation theory,” J. Stat. Phys. 1, 231–252 (1969), doi:10.1007/BF01007479.DOI
  3. [41]A. S. Holevo, “Asymptotic Estimation of a Shift Parameter of a Quantum State,” Theory Probab. Appl. 49, 207–220 (2005), doi:10.1137/S0040585X97981044; arXiv:quant-ph/0307225.DOI
  4. [42]A. Toigo, Positive operator measures, generalised imprimitivity theorem, and their applications, doctoral thesis (2005), Theorem 2.4.3, Corollary 2.4.5 and Section 2.5.1, doi:10.48550/arXiv.math-ph/0505080.DOI

Paper details

vlnc:W_28wv2b3k
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 11

downloads · 1

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

LLM Models

View statement
Looking for related papers…
Contents