betaFeedback

WorksMathematics

A thermodynamics-based turbulence model for isothermal compressible flows

Abstract

This study presents a new turbulence model for isothermal compressible flows. The model is derived by combining the Favre averaging and the Conservation-dissipation formalism – a newly developed thermodynamics theory. The latter provides a systematic methodology to construct closure relations that intrinsically satisfy the first and second laws of thermodynamics. The new model is a hyperbolic system of first-order partial differential equations. It has a number of numerical advantages, and addresses some drawbacks of classical turbulence models by resolving the non-physical infinite information propagation paradox of the parabolic-type models and accurately capturing the interaction between compressibility and turbulence dissipation. Furthermore, we show the compatibility of the proposed model with Prandtl's one-equation model for incompressible flows by deliberately rescaling the model and studying its low Mach number limit.

Introduction

Turbulent flows are ubiquitous in nature and almost all flows of practical engineering interest are turbulent. Typical examples include flows around moving objects such as airplanes, ships and automobiles. They are also important parts in a variety of transport phenomena occurring in the atmosphere and ocean. A correct understanding and accurate simulation of turbulence has important practical and scientific significance. Starting from the pioneering works of Reynolds, Prandtl, Kolmogorov, Boussinesq and von Kármán [1, 2, 3, 4, 5], many theoretical and computational models have been developed, such as Prandtl’s one-equation model [6], two-equations models [7, 8, 9, 10] and so on [11, 12]. Most of the earlier works are for incompressible fluids [13, 14, 15, 16, 17, 18] and are based on the Reynolds averaging and the Boussinesq eddy-viscosity approximation. These models are quite successful in many applications [19, 20, 21, 22]. However, they may give predictions significantly different from measurements [23].

The compressibility effects can substantially influence flow behaviors [24, 25, 26]. The extension of turbulence modeling to compressible flows introduces additional complexities arising from density variations, shock-turbulence interactions, and dilatational dissipation mechanisms [26, 27]. Notably, the classical Boussinesq hypothesis becomes increasingly problematic at higher Mach numbers due to the breakdown of equilibrium between the turbulent stress and mean strain rate [11, 12]. Furthermore, the coupling between acoustic modes and turbulent kinetic energy transfer creates new closure challenges that are absent in incompressible formulations [28]. These inherent limitations motivate the need for a fundamentally new modeling paradigm grounded in thermodynamic consistency.

The goal of this work is to contribute a new perspective to this actively developing field. The core is to make full use of the first and second laws of thermodynamics and propose novel turbulence models for compressible flows. Towards this goal, we start with conservation laws for isothermal flows, take the Reynolds averaging or Favre averaging and obtain new conservation equations with a Reynolds-stress tensor. Then a Boussinesq-like approximation is adapted for the Reynolds stress. More importantly, the resultant conservation laws are closed by utilizing the Conservation-Dissipation Formalism (CDF) [29, 30] – a recently developed nonequilibrium thermodynamics theory, which provides a systematic methodology to construct closure relations that intrinsically satisfy the first and second laws of thermodynamics. The derived model is a set of first-order partial differential equations, which is hyperbolic and thermodynamically stable. In particular, it guarantees that the turbulent entropy production remains non-negative, thereby eliminating unphysical solutions.

Unlike the traditional turbulence models such as Prandtl’s one-equation model and the k−εk-\varepsilon model [7, 8], our hyperbolic model does not contain second-order spatial derivatives in the governing equations. This fundamental architectural innovation possesses significant advantages. Physically, it inherently satisfies the causality principle in turbulent flow evolution and resolves the non-physical infinite information propagation paradox of the parabolic-type models. Numerically, the hyperbolic nature of our first-order model enables efficient discretizations [31, 32] via, for instance, the discontinuous Galerkin method [33] and finite-volume methods [34]. It also offers geometric flexibility through relaxed mesh quality requirements – particularly advantageous for complex industrial configurations involving multi-element airfoils or labyrinthine cooling channels.

On the other hand, our new turbulence model is also different from the first-order hyperbolic models recently proposed in [35, 36]. Those models were obtained by mathematically relaxing the traditional second-order convection-diffusion turbulence models (including Prandtl’s one-equation model, the k−εk-\varepsilon and k−ωk-\omega models), and by replacing the Navier-Stokes equations with the ten-moment equations [37]. Although the models achieve hyperbolicity through mathematical relaxation techniques (e.g., introducing auxiliary variables for turbulent quantities), their approach lacks a clear thermodynamic basis. In contrast, our CDF-based closure rigorously enforces the entropy inequality through its constitutive structure, ensuring thermodynamic consistency.

To show the reasonableness of our new turbulence model, we deliberately rescale the model to analyseWinvalid its low Mach number limit. Particularly, it is justified that the new model is compatible with Prandtl’s one-equation model for incompressible flows. The compatibility demonstrates that the new hyperbolic model successfully bridges the gap in the theoretical disparities between compressible and incompressible turbulent flow regimes, establishing a unifying paradigm that harmonizes traditionally distinct domains of fluid mechanics research.

The rest of the paper is organized as follows. § 2 presents the Favre-averaged fluid equations and the Boussinesq-like approximation for the corresponding Reynolds stress. In § 3 we introduce the Conservation-dissipation formalism and construct a toy model to show how CDF works. Our new hyperbolic turbulence model is constructed in § 4. In § 5 we rescale the new turbulence model. The low Mach number limit is justified in Section 6.

Favre-averaged Fluid Equations

Consider an isothermal compressible fluid. Without external forces, the conservation laws of mass and momentum for such electrically neutral fluids read as

∂tρ+∇⋅(ρu)=0,\partial_t \rho+ \nabla\cdot(\rho\mathbf{u}) = 0,
∂t(ρu)+∇⋅(ρu⊗u+P)=0.(1)\partial_t(\rho\mathbf{u}) + \nabla\cdot(\rho\mathbf{u} \otimes\mathbf{u} + \mathbf{P}) = 0. \tag*{(1)}

Here ρ\rho is the fluid density, u∈R3\mathbf{u} \in\mathbb{R}^{3} is the velocity, P\mathbf{P} is the stress tensor which is symmetric, ∇\nabla is the gradient operator with respect to the space variable x=(x1,x2,x3)\mathbf{x} = (x_1,x_2,x_3), ⊗\otimes denotes the tensorial product. (x,t)∈Ω×(0,+∞)(\mathbf{x},t) \in\Omega\times(0,+\infty) with Ω⊂R3\Omega\subset\mathbb{R}^{3}. This system governs the evolution of variables (ρ,ρu)(\rho,\rho\mathbf{u}), while the stress tensor P\mathbf{P} has to be modeled for the above equations to be closed.

In turbulence modeling for incompressible flows, it is a common practice to decompose the fluid variables into mean and fluctuating parts:

ρ=ρ‾+ρ′,P=P‾+P′.(2)\rho= \overline{\rho} + \rho', \qquad\mathbf{P} = \overline{\mathbf{P}} + \mathbf{P}'. \tag*{(2)}

Here, ρ‾\overline{\rho} and ρ′\rho' denote the Reynolds average (mean) and fluctuation of ρ\rho, respectively; and P‾\overline{\mathbf{P}} and P′\mathbf{P}' have similar meanings. By the nature of the Reynolds average, we have the following fundamental properties [38]:

ϕ′‾=0,ϕϕ′‾=ϕψ′‾=0,ϕψ‾=ϕ‾ ψ‾+ϕ′ψ′‾,ϕ2‾=ϕ‾ 2+ϕ′2‾,\overline{\phi'} = 0,\qquad\overline{\phi\phi'} = \overline{\phi\psi'} = 0,\qquad\overline{\phi\psi} = \overline{\phi}\,\overline{\psi} + \overline{\phi'\psi'},\qquad\overline{\phi^2} = \overline{\phi}^{\,2} + \overline{\phi'^2},
∂ϕ‾∂t=∂ϕ‾∂t,∂ϕ‾∂xi=∂ϕ‾∂xi,(i=1,2,3),\frac{\partial\overline{\phi}}{\partial t} = \frac{\partial\overline{\phi}}{\partial t},\qquad\frac{\partial\overline{\phi}}{\partial x_i} = \frac{\partial\overline{\phi}}{\partial x_i},\qquad(i=1,2,3),
ϕψξ‾=ϕ‾ ψ‾ ξ‾+ϕ′ψ′ξ′‾+ϕ′ξ′‾ ψ‾+ψ′ξ′‾ ϕ‾+ϕ′ψ′‾ ξ‾.(3)\overline{\phi\psi\xi} = \overline{\phi}\,\overline{\psi}\,\overline{\xi} + \overline{\phi'\psi'\xi'} + \overline{\phi'\xi'}\,\overline{\psi} + \overline{\psi'\xi'}\,\overline{\phi} + \overline{\phi'\psi'}\,\overline{\xi}. \tag*{(3)}

Here ϕ\phi and ψ\psi are two generic fluid variables.

For compressible flows, the Reynolds average is often enhanced by the Favre average (or mass-weighted average) [39], defined as

ϕ~=ρϕ‾ρ‾\widetilde{\phi} = \frac{\overline{\rho\phi}}{\overline{\rho}}

for ρ‾>0\overline{\rho} > 0. By this definition, the fluid variable is decomposed into

ϕ=ϕ~+ϕ′′(4)\phi= \widetilde{\phi} + \phi'' \tag*{(4)}

and the following properties hold:

ρϕ‾=ρ‾ ϕ~,ρϕ′′‾=0,ρϕψ‾=ρ‾ ϕ~ψ~+ρϕ′′ψ′′‾,ϕψ~‾=ϕ‾ ψ~.\overline{\rho\phi} = \overline{\rho}\,\widetilde{\phi},\qquad\overline{\rho\phi''} = 0,\qquad\overline{\rho\phi\psi} = \overline{\rho}\,\widetilde{\phi}\widetilde{\psi} + \overline{\rho\phi''\psi''},\qquad\overline{\phi\widetilde{\psi}} = \overline{\phi}\,\widetilde{\psi}.

It is important to notice that ϕ′′\phi'' may not vanish while ϕ′=0\phi' = 0. Note that the Favre average u~\widetilde{\mathbf{u}} of velocity u\mathbf{u} is identical to its Reynolds average u‾\overline{\mathbf{u}} for incompressible flows.

By taking the Reynolds average on the equations [1] and using the Favre average of the fluid velocity, we obtain the following conservation laws

∂tρˉ+∇⋅(ρˉu~)=0,∂t(ρˉu~)+∇⋅(ρˉu~⊗u~+ρˉu′′⊗u′′‾+Pˉ)=0.(5)\partial_t\bar{\rho}+\nabla\cdot(\bar{\rho}\widetilde{u})=0, \\ \partial_t(\bar{\rho}\widetilde{u})+\nabla\cdot(\bar{\rho}\widetilde{u}\otimes\widetilde{u}+\bar{\rho}\overline{u^{\prime\prime}\otimes u^{\prime\prime}}+\bar{P})=0. \tag*{(5)}

This system is not closed since it contains the mean stress tensor Pˉ\bar{P} and additional unknown tensor

τ≡−ρˉu′′⊗u′′‾.\tau\equiv-\bar{\rho}\overline{u^{\prime\prime}\otimes u^{\prime\prime}}.

The symmetric semi-negative definite tensor τ\tau is the Reynolds stress that incorporates the effects of turbulent motions on the mean stresses.

The closure problem is to express the mean stress tensor Pˉ\bar{P} and the Reynolds stress tensor τ\tau as functions of the mean-field and other variables. To do this, we recall the traditional way to close the system [1] for laminar flows, where the stress tensor PP is modelled by using Newton’s law of viscosity. This empirical law, together with the conservation laws [1], forms the classical Navier-Stokes equations. However, these equations are insufficient in some situations such as fluids with memory or high-frequency heat transfer, where flux or stress relaxation times are significant, as in polymer solutions and suspensions [40]. To address such non-classical scenarios, the Conservation-dissipation formalism (CDF) was developed [29].

For turbulent flows, the Reynolds-stress tensor τ\tau can be viewed as a second-order moment of velocity fluctuations. Thus we can use the conservation laws [1] to derive its governing equation, which depends on third-order moments of velocity fluctuations, due to the nonlinearity in equations [1]. Moreover, the governed equations of third-order moments can be derived and depend on fourth-order moments, and so on. In this way, we derive a hierarchy of infinitely many moment equations. On physical grounds, this is not surprising, since the operations are strictly mathematical in nature and introduce no additional physical principles. In essence, the Reynolds averaging is a brutal simplification that causes the loss of much of the information contained in the conservation laws. The aim of turbulence modelling is to express high-order moments in terms of lower-order moments [41].

Another approach is to approximate the Reynolds-stress tensor τ\tau with the so-called Boussinesq approximation [4]

τ=νT(∇u~+(∇u~)T)−23kI3.(6)\tau=\nu_T\left(\nabla\widetilde{u}+(\nabla\widetilde{u})^T\right)-\frac{2}{3}kI_3. \tag*{(6)}

Here νT\nu_T is the turbulence eddy viscosity, k=12ρˉu′′⋅u′′‾k=\frac{1}{2}\bar{\rho}\overline{u^{\prime\prime}\cdot u^{\prime\prime}} is the turbulent kinetic energy related to the trace of τ\tau, I3I_3 is the second-order unit tensor in R3\mathbb{R}^3 and the superscript TT denotes the transpose. This approximation has been used widely in the simulation of practical turbulent flows, although it is not unsatisfactory for compressible flows.

Based on the Boussinesq approximation, several eddy-viscosity models have been developed, and typical examples are one-equation models and two-equation models [41]. These models all contain the following turbulent kinetic energy equation:

∂tk+u~⋅∇k=τ:∇u~−ϵ+∇⋅((ν+νT)∇k),(7)\partial_t k+\widetilde{u}\cdot\nabla k=\tau:\nabla\widetilde{u}-\epsilon+\nabla\cdot\left((\nu+\nu_T)\nabla k\right), \tag*{(7)}

where ϵ\epsilon is the dissipation rate and ν\nu is the shear viscosity. Here the colon stands for the double contraction of two second-order tensors: A:B=∑i,jAijBijA:B=\sum_{i,j}A_{ij}B_{ij}. The last equation was derived by taking the trace of the traditional Reynolds-stress equation [41]. It is a second-order partial differential equation, while the original conservation laws [1] contain only first-order derivatives. Other deficiencies of the Boussinesq approximation can be found in [42].

In an attempt to overcome the deficiencies, we write the mean stress tensor as

Pˉ=σˉ+pˉI3\bar{P}=\bar{\sigma}+\bar{p}I_3

with the thermodynamic pressure pˉ\bar{p}. Note that σˉ\bar{\sigma} is the averaged deviatoric stress tensor which is symmetric. With σˉ\bar{\sigma} thus defined, we modify the Boussinesq approximation (6) as

τ=−μTσˉ−23kI3(8)\boldsymbol{\tau}=-\mu_T\bar{\boldsymbol{\sigma}}-\frac{2}{3}kI_3 \tag*{(8)}

with μT\mu_T for the turbulence viscosity. With this modification, the Reynolds-averaged equations (5) can be rewritten as

References

  1. [1]W. C. Reynolds. Computation of turbulent flows. Annual Review of Fluid Mechanics, 8:183–208, 1976.
  2. [2]L. Prandtl. Über die ausgebildete turbulenz. Zeitschrift für Angewandte Mathematik und Mechanik, 5:136–139, 1925.
  3. [3]A. N. Kolmogoroff. The local structure of turbulence in incompressible viscous fluid for very large Reynold’s numbers. C. R. (Doklady) Acad. Sci. URSS (N.S.), 30:301–305, 1941.
  4. [4]J. Boussinesq. Théorie de l’écoulement tourbillant. Mémoires de l’Académie des Sciences de l’Institut de France, 23:46–50, 1877.
  5. [5]T. von Kármán. Progress in the statistical theory of turbulence. Proc. Nat. Acad. Sci. U.S.A., 34:530–539, 1948.pubmed.ncbi.nlm.nih.gov/16588830
  6. [6]L. Prandtl and K. Wieghardt. über ein neues Formelsystem für die ausgebildete Turbulenz. Nachr. Akad. Wiss. Göttingen. Math.-Phys. Kl. Math.-Phys.-Chem. Abt., 1945:6–19, 1945.
  7. [7]K. Hanjalić and B. E. Launder. A Reynolds-Stress model of turbulence and its application to thin shear flows. J. Fluid Mech., 52:609–638, 1972.DOI
  8. [8]B. E. Launder and D. B. Spalding. The numerical computation of turbulent flows. Comput. Methods Appl. Mech. Eng., 3:269–289, 1974.
  9. [9]P. G. Saffman. A model for inhomogeneous turbulent flow. Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 317(1530):417–433, 1970.DOI
  10. [10]D. C. Wilcox. Reassessment of the scale-determining equation for advanced turbulence models. AIAA J., 26:1299–1310, 1988.DOI
  11. [11]G. Ahmadi. A two-equation turbulence model for compressible flows based on the second law of thermodynamics. Journal of Non-Equilibrium Thermodynamics, 14(1):45–60, 1989.DOI
  12. [12]P. Huang, G. N. Coleman, and P. Bradshaw. Compressible turbulent channel flows: DNS results and modelling. Journal of Fluid Mechanics, 305:185–218, 1995.DOI
  13. [13]B. E. Launder and D. B. Spalding. Mathematical Models of Turbulence. Academic Press, New York, 1972.
  14. [14]J. L. Lumley. Computational modeling of turbulent flows. In Advances in applied mechanics, Vol. 18, pages 123–176. Academic Press, New York-London, 1978.
  15. [15]W. Rodi. Examples of turbulence models for incompressible flows. American Institute of Aeronautics and Astronautics Journal, 20(7):872–879, 1982.DOI
  16. [16]W. P. Jones and B. E. Launder. The prediction of laminarization with a two-equation model of turbulence. International Journal of Heat and Mass Transfer, 15(2):301–314, 1972.DOI
  17. [17]W. P. Jones and B. E. Launder. The calculation of low-Reynolds-number phenomena with a two-equation model of turbulence. International Journal of Heat and Mass Transfer, 16(6):1119–1130, 1973.DOI
  18. [18]B. E. Launder, G. J. Reece, and W. Rodi. Progress in the development of a reynolds-stress turbulence closure. Journal of Fluid Mechanics, 68(3):537–566, 1975.DOI
  19. [19]B. E. Launder and D. B. Spalding. Mathematical Models of Turbulence. Academic Press, London, 1972.
  20. [20]P. Bradshaw, T. Cebeci, and J. H. Whitelaw. Engineering Calculation Methods for Turbulent Flow. Academic Press, New York, 1981.
  21. [21]S. Deck, P. Duveau, P. d’Espiney, and P. Guillen. Development and application of Spalart–Allmaras one equation turbulence model to three-dimensional supersonic complex configurations. Aerospace Science and Technology, 6:171–183, 03 2002.DOI
  22. [22]F. R. Menter, M. Kuntz, and R. Langtry. Ten years of industrial experience with the SST turbulence model. Heat and Mass Transfer, 4, 01 2003.
  23. [23]P. Bradshaw. Effects of streamline curvature on turbulent flow. AGARD, 169, 1973.
  24. [24]S. P. Jones. Models for turbulent flows with variable density. In Prediction Methods for Turbulent Flows with Variable Density, VKI Lecture Series 1979-2, pages 1–30. Hemisphere Publishing Corp, 1980.
  25. [25]P. A. Libby and F. Williams. Turbulent Reacting Flows. Springer, New York, 1980.
  26. [26]S. Sarkar, G. Erlebacher, M. Hussaini, and H. Kreiss. Analysis and modelling of dilatational terms in compressible turbulence. Journal of Fluid Mechanics, 227, 06 1991.
  27. [27]P. A. Durbin. Some recent developments in turbulence closure modeling. Annual Review of Fluid Mechanics, 50(Volume 50, 2018):77–103, 2018.DOI
  28. [28]G. A. Blaisdell, N. N. Mansour, and W. C. Reynolds. Compressibility effects on the growth and structure of homogeneous turbulent shear flow. Journal of Fluid Mechanics, 256:443–485, 1993.DOI
  29. [29]Y. Zhu, L. Hong, Z. Yang, and W.-A. Yong. Conservation-Dissipation formalism of irreversible thermodynamics. Journal of Non-Equilibrium Thermodynamics, 40(2):67–74, 2015.arxiv.org/abs/1407.5498
  30. [30]W.-A. Yong. Intrinsic properties of Conservation-Dissipation formalism of irreversible thermodynamics. Philos. Trans. Roy. Soc. A, 378(2170):20190177, 16, 2020.DOI
  31. [31]J. G. McDonald. Extended fluid-dynamic modelling for numerical solution of micro-scale flows. University of Toronto, 2011.
  32. [32]J. G. McDonald, J. S. Sachdev, and C. P. T. Groth. Application of gaussian moment closure to microscale flows with moving embedded boundaries. AIAA journal, 52(9):1839–1857, 2014.DOI
  33. [33]B. Cockburn, G. E. Karniadakis, and C. W. Shu. The development of discontinuous Galerkin methods. In Discontinuous Galerkin methods, volume 11, pages 3–50. Springer, Berlin, 2000.DOI
  34. [34]R. J. LeVeque. Finite volume methods for hyperbolic problems. Cambridge Texts in Applied Mathematics. Cambridge University Press, Cambridge, 2002.
  35. [35]C. Yan and J. G. McDonald. Hyperbolic turbulence models for moment closures. J. Comput. Phys., 422:109753, 30, 2020.DOI
  36. [36]C. Yan and J. G. McDonald. Hyperbolic equivalent k-ε and k-ω turbulence models for moment-closures. J. Comput. Phys., 476:Paper No. 111881, 31, 2023.DOI
  37. [37]C. D. Levermore and W. J. Morokoff. The Gaussian moment closure for gas dynamics. SIAM J. Appl. Math., 59(1):72–96, 1999.DOI
  38. [38]H. Tennekes and J. L. Lumley. A first course in turbulence. MIT press, 1972.
  39. [39]A. J. Favre. Statistical equations of turbulent gases. Problems of hydrodynamics and continuum mechanics, pages 231–266, 1969.
  40. [40]D. Jou, J. Casas-Vázquez, and G. Lebon. Extended irreversible thermodynamics. Springer-Verlag, Berlin, second edition, 1996.
  41. [41]D. C. Wilcox. Turbulence modeling for CFD, volume 2. DCW industries La Canada, CA, 1998.
  42. [42]G. Alfonsi. Reynolds-Averaged Navier–Stokes equations for turbulence modeling. Applied Mechanics Reviews, 62(4):040802, 06 2009.
  43. [43]I. Müller and T. Ruggeri. Rational extended thermodynamics, volume 37 of Springer Tracts in Natural Philosophy. Springer-Verlag, New York, second edition, 1998.
  44. [44]W.-A. Yong. An interesting class of partial differential equations. J. Math. Phys., 49(3):033503, 21, 2008.arxiv.org/abs/0707.3708
  45. [45]W.-A. Yong. Singular perturbations of first-order hyperbolic systems with stiff source terms. J. Differential Equations, 155(1):89–132, 1999.DOI
  46. [46]W.-A. Yong. Entropy and global existence for hyperbolic balance laws. Arch. Ration. Mech. Anal., 172(2):247–266, 2004.DOI
  47. [47]S. K. Godunov. An interesting class of quasi-linear systems. volume 139, pages 521–523, 1961.
  48. [48]K. O. Friedrichs and P. D. Lax. Systems of conservation equations with a convex extension. Proc. Nat. Acad. Sci. U.S.A., 68:1686–1688, 1971.pubmed.ncbi.nlm.nih.gov/16578711
  49. [49]A. Majda. Compressible fluid flow and systems of conservation laws in several space variables, volume 53 of Applied Mathematical Sciences. Springer-Verlag, New York, 1984.DOI
  50. [50]S. R. De Groot and P. Mazur. Nonequilibrium thermodynamics. Dover Publications, Inc., New York, 1984. Reprint of the 1962 original.
  51. [51]Z. Yang, W.-A. Yong, and Y. Zhu. Generalized hydrodynamics and the classical hydrodynamic limit, 2018.arxiv.org/abs/1809.01611
  52. [52]E. Feireisl and A. Novotný. The low Mach number limit for the full Navier–Stokes–Fourier system. Arch. Ration. Mech. Anal., 186(1):77–107, 2007.DOI
  53. [53]T. Alazard. Low Mach number limit of the full Navier–Stokes equations. Arch. Ration. Mech. Anal., 180(1):1–73, 2006.DOI
  54. [54]W.-A. Yong. A note on the zero Mach number limit of compressible Euler equations. Proc. Amer. Math. Soc., 133(10):3079–3085, 2005.DOI

Paper details

vlnc:W_29gfpde5
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents