betaFeedback

WorksPhysics and Astronomy

Tunable bilayer dielectric metasurface via stacking magnetic mirrors

Abstract

Functional tunability, environmental adaptability, and easy fabrication are highly desired properties in metasurfaces. Here we provide a tunable bilayer metasurface composed of two stacked identical dielectric magnetic mirrors, which are excited by the dominant electric dipole and other magnetic multipoles, exhibiting nonlocal electric field enhancement near the interface and high reflection. Differ from the tunability through the direct superposition of two structures with different functionalities, we achieve the reversible conversion between high reflection and high transmission by manipulating the interlayer coupling near the interface between the two magnetic mirrors. The magnetic mirror effect boosts the interlayer coupling when the interlayer spacing is small. Decreasing the interlayer spacing of the bilayer metasurface leads to stronger interlayer coupling and scattering suppression of the meta-atom, which results in high transmission. On the contrary, increasing the spacing leads to weaker interlayer coupling and scattering enhancement, which results in high reflection. The high transmission of the bilayer metasurface has good robustness due to that the meta-atom with interlayer coupling can maintain the scattering suppression against adjacent meta-atom movement and disordered position perturbation. This work provides a straightforward method (i.e. stacking magnetic mirrors) to design tunable metasurface, shed new light on high-performance optical switches applied in communication and sensing.

Introduction

Metasurfaces usually consist of sub-wavelength meta-atoms arranged on a two-dimensional (2D) plane for electromagnetic (EM) wavefront manipulation [1, 2], which have been applied in integrated optics, information communication, on-chip photonics, and also obtained many exotic physical phenomena [3, 4, 5], new laws [6], and high-performance functional devices [7, 8, 9, 10].

High refractive-index dielectric structures with lossless and high efficiency are important branches of metasurface research, which realize full wavefront manipulation by controlling the Mie resonances of meta-atoms via changing refractive index, geometric shape/size, et al [11, 12, 13, 14, 15]. Moreover, strong artificial magnetic responses can be easily obtained by simple dielectric particles [2, 13, 16, 17]. A recent remarkable achievement based on the induced significant magnetic responses is magnetic mirrors (MMs) [18, 19, 20, 21]. MMs exhibit in-phase high reflection near the medium interfaces, effectively eliminating the half-wave loss of electric field existing at the interfaces of the conventional metal mirrors, resulting in the enhanced large-scale near-field electric field and light-matter interactions, applied in subwavelength imaging [22], molecular fluorescence [23], Raman spectroscopy [24], perfect reflectors [25, 26], etc. Up to now, it has been found that the electric responses and multiple response interferences can also generate the MMs [27, 28, 29]. Yet there are few studies on the features and applications of stacking MMs.

To address the challenges of real-time, tunable, multifunctional in emerging applications, such as computational imaging, ultrafast light, quantum communication, opto-thermal management, dynamic sensing, it provides an opportunity to develop the next generation tunable metasurfaces [30, 31, 32]. One way is to apply extra operations generally including mechanical motion [33], electric voltage [34], electrochemistry [35, 36], encoding [37], liquid crystals [38], and phase change materials [39]. On the other hand, stacking a few single-layer metasurfaces is also an effective and controllable way to design tunable metasurfaces, which usually consist of two or three layers [40, 41, 42] exhibiting novel properties and applications, e.g., reflection/transmission and absorption switchers [39, 43], full-space controls of EM waves [44, 45], wideband chromatic aberration-free meta-mirrors [46], intelligent rapid holographic imager [47], beam splitting [48], etc. However, most multifunctional stacked metasurfaces are based on the superposition of carefully patterned single-layer metasurfaces with different functions, which lead to the harder fabrication of complex structures requiring precise alignment, and probably introduce more EM loss [32, 42, 49, 50] and instability.

Here we present a tunable bilayer metasurface simply stacked by two identical single-layer MMs composed of air-Al2_2O3_3 dielectric concentric cylinders. The MM is excited by the interference of the dominant electric dipole resonance and other magnetic multipoles. The dynamical conversion between high reflection and transmission is realized easily by adjusting the interlayer spacing. Different from the tunability originating from the in-plane coupling between adjacent meta-atoms [51, 52], the physical root of this tunable metasurface is the controllable interlayer coupling leading to controllable scattering of the composite meta-atoms. Note that interlayer coupling corresponds to scattering suppression and high transmission, whereas decoupling corresponds to scattering enhancement and high reflection. The near-field electric field enhancement of MM plays a large role in interlayer coupling when two layers are close. High transmission of the bilayer metasurface is robust because the scattering suppression has great tolerance to the disturbance of positional disorders and adjacent meta-atom movements. Our finding is verified in microwave experiments. This work may open a new pathway to the research and application of stacking magnetic mirrors and tunable metasurfaces, and probably provide a promising component for high-performance optical switching applied in communication and sensing.

EM responses of metasurfaces

Single-layer magnetic mirror

We begin by considering a single-layer metasurface composed of infinite concentric cylinders periodic arranged along the xx-direction with the minimal face spacing pp depicted in Figure 1(a). The radius of the air-core is r0r_0, the shell is Al2_2O3_3 with radius r1r_1 and relative permittivity ε1=9.424+i2.920×10−3\varepsilon_1=9.424+i2.920\times10^{-3} [53]. The incident EM wave vector k\mathbf{k} (wavenumber kk) in the air is perpendicular to the centreline of the cylinder and the polarization of electric field E\mathbf{E} is along the zz-axis. We set the fixed incident frequency of 10 GHz (incident wavelength λ\lambda) and parameter kr1=1.593kr_1=1.593 (i.e. r1r_1 fixed). The α=r0/r1\alpha=r_0/r_1 is to characterize the inner radius. Throughout this paper, the numerical simulations are completed by the commercial software COMSOL [54]. The whole structure is immersed in free space and analyzed using a 2D model with period and perfectly matched layer (PML) boundaries.

Schematic of a single-layer periodic metasurface, field distributions, and spectra

Figure 1. (a) Schematic of a single-layer periodic metasurface and a normally incident linearly polarized plane wave. (b) Reflectivity (R, blue), transmissivity (T, black), reflection phase ΔϕE\Delta\phi_{\mathrm{E}} curves of the single-layer metasurface with p=p0p=p_{0}. Point A corresponds to the magnetic mirror with ΔϕE=0\Delta\phi_{\mathrm{E}}=0. (c) Normalized electric field ∣E∣|\mathbf{E}| distribution at point A. Hereafter, the scale bar denotes 10 mm. (d) Energy distribution at point A under Gaussian beam incidence. (e) Spectra of R (blue), T (black), ΔϕE\Delta\phi_{\mathrm{E}} (red) curves of the metasurface at point A with respect to pp.

With p=p0p=p_{0} (0.21λ0.21\lambda) and α\alpha varying, the reflectivity (R), transmissivity (T), reflection phase (ΔϕE\Delta\phi_{\mathrm{E}}) of the metasurface are demonstrated in Figure 1(b). ΔϕE\Delta\phi_{\mathrm{E}} is the phase difference between the reflected and incident electric field at the interface plane, which is tangent to the top of the metasurface where the incident wave directly interacts with. In the discussed range of α\alpha, ΔϕE\Delta\phi_{\mathrm{E}} presents the continuous change of full phase accompanied by the variable R and T. Interestingly, a MM with ΔϕE=0\Delta\phi_{\mathrm{E}}=0, R=0.87, and T=0.01 is achieved at point A (corresponds to α=0.414\alpha=0.414).

Figure 1(c) shows the normalized electric field ∣E∣|\mathbf{E}| distribution of one unit cell of the MM. The interface plane is located near the maximum value of stand wave interference of the electric field. ∣E∣|\mathbf{E}| is mainly confined in the shell and the pattern in the cylinder indicates the presence of magnetic octupole (MO) [55]. Figure 1(d) displays the energy density distribution of the MM under a Gaussian beam with wave vector k\mathbf{k}. One can see that a little partial energy is localized near the interfaces and most are reflected.

The period dependence of the EM response of the MM is shown in Figure 1(e). The metasurface corresponding to point A maintains the MM effect (ΔϕE∼0\Delta\phi_{\mathrm{E}}\sim0, R>0.8) in the range of pp from 0.20λ0.20\lambda to 0.23λ0.23\lambda, displaying a perfect conversion of R without T to T without R in the whole range. For simplicity, we define the perfect conversion efficiency (η\eta) of the R without T to T without R as the absolute value of the maximum value ratio of T to R, i.e. η=∣Tm/Rm∣\eta=\left|T_{\mathrm{m}}/R_{\mathrm{m}}\right|. According to the η\eta, we can estimate whether there is EM energy dissipation. Here, the η\eta is about 0.89, which indicates the reflected energy converts into the transmission and small partial EM dissipation. Moreover, the MM has an asymmetric transmissivity curve near the incident frequency [see Fig. 3(a)].

Tunable bilayer metasurface

Figure 2(a) depicts a schematic of a bilayer metasurface stacked by two identical MMs corresponding to point A. The two MMs are aligned and hh is the minimum interlayer face spacing. k\mathbf{k} is perpendicular to the metasurface and E\mathbf{E} is parallel to the centerline of the cylinder. Adjusting hh continuously, Figure 2(b) shows dynamic R (red) and T (blue) curves of the bilayer metasurface. Point B corresponds to the high T without R and point C denotes any point of the high R without T in the whole range. Here, hh of point B equals h0h_0 (0.302λ\lambda). The η\eta is about 1.02, which indicates the bilayer metasurface can realize nearly equal intensity perfect interconversion between high reflection and high transmission. Furthermore, the bilayer metasurface obtains high transmission with larger operating bandwidth compared with Figure 1(e). The asymmetric peak near hh=0.56λ\lambda indicates the existence of 1st order Fabry-Perot (FP) resonance between the two layers, the other asymmetric peaks at larger hh show the presence of high-order FP resonances.

Schematic, spectra, field distributions, and energy density distributions of a bilayer metasurface

Figure 2. (a) Schematic of a bilayer metasurface stacked by the two MMs corresponding to point A with minimal interlayer face spacing hh under the same incident plane wave. (b) R and T spectra of the bilayer metasurface as a function of hh. The insets correspond to the ∣E∣|\mathbf{E}| distributions of points B and C, respectively. (c) and (d) energy density distributions of the metasurface under a Gaussian beam corresponding to points B and C, respectively.

The insets in Figure 2(b) show the ∣E∣|\mathbf{E}| distributions of points B and C with incident wavevector k\mathbf{k}, respectively. Here, we randomly selected a point C with hh=1.20λ\lambda. The two cylinders occur obvious coupling at point B while decoupling at point C. Figures 2(c) and 2(d) show the energy distributions of the bilayer metasurface under a normal incident Gauss beam of points B and C, respectively. As a result, point B corresponds to the turn 'on' state of incident energy almost without loss as shown in Figure 2(c), whereas the turn 'off' state with total reflection at point C is presented in Figure 2(d).

Experimental verification

We verify this intriguing phenomenon of the tunable metasurface in the transmission geometry via microwave experiments. The schematic is shown in the inset of the top right corner in Figure 4. A microwave vector network analyzer (VNA) with an aligned transmitter and receiver generates a polarized EM wave with a continuously variable frequency at about 10GHz. The measurement has been calibrated using the thru response calibration, which treats the free transmission between the transmitting and the receiving horns without any obstacle in between as the reference signal. The periodic single-layer (PS) MM at point A is constructed by 12 finite length alumina ceramic rods with the spacing P0P_0, where the length is about 6.67λ6.67\lambda as shown in Figure 3(c). The bilayer metasurface is stacked by the two PS MMs. Figure 3(a) shows the frequency response of the MM at point A. It exhibits an asymmetric TT curve and zero transmission near 10 GHz. Figure 3(b) is the frequency response in the experiment. According to the minimum value and asymmetric profile of the TT, we confirm that the response frequency of the MM redshifts to 9.853GHz. The metasurface samples are located in the far-field domain for approximate plane wave incidence. The distances between the sample and the transmitter and receiver are based on the antenna far-field condition

Figure 3. TT spectra of frequency dependency of the single-layer MM (a) in the simulation and (b) in the experiment. (c) Experimental setup.

Figure 4. TT spectra of metasurfaces to hh in microwave experiment. λ1\lambda_1 corresponds to the actual effective response wavelength in the experiment. biP: bilayer periodic metasurface; RB: bilayer metasurface with the random arrangement in the bottom layer; RT: the random arrangement in the top layer; RBT: the random arrangement in the two layers; PS: periodic single-layer metasurface; RS: random single-layer metasurface. The red dotted line is the interpolating fitting of data. Each point and the related error bar correspond to the average value and standard error of multiple measurements, respectively. The inset in the top right corner shows the experiment setup. VNA refers to a microwave vector network analyzer. The other inset below presents the response factors (ρ\rho) of random metasurfaces.

d≥2D2/λ0d \ge2D^2/\lambda_0

where DD is the maximum linear dimension of the antenna and λ0\lambda_0 is the operating wavelength. The supporting low-density expanded polystyrene foams are almost transparent to the operating microwave, which can minimize their interference with the signal.

The experiment starts with the MM. Its effective response frequency redshifts to 9.853GHz [see Figure 3(b) corresponding to the free-space wavelength of λ1\lambda_1. The TT of PS MM is represented by a red circle in Figure 4. Each point and the relevant error bar correspond to the average value and standard deviation of multiple measurements, respectively. Therefore, the RR of the MM is about 0.64 because TT is about 0.36 and the absorption of the material is negligible. The red dots in Figure 4 denote the TT spectrum of the bilayer periodic (biP) metasurface as hh varies, where the red dotted line is achieved by data interpolating and fitting. Thus, the biP metasurface exhibits a tunable TT with a range of about from 0.07 to 0.90, which agrees well with the blue curve of numerical simulation in Figure 2(b). The peak near h=0.52λ1h=0.52\lambda_1 originates from the FP resonance. However, the hh of the maximum TT becomes smaller than h0h_0 due to effective response frequency change. The deviation between experiment and simulation comes from the limitations of experimental conditions (e.g., finite-length cylinders, finite width array) and fabrication precision. Notwithstanding these limitations, the experiment does verify the tunability of the bilayer metasurface consistent with the theoretical simulation.

Scattering analysis

Scattering of an isolated cylinder

To further understand the underlying physical mechanisms of the tunability of the bilayer metasurface, we next consider the scattering properties of a standalone infinitely-long hollow-core cylinder under a polarized plane wave, as depicted in the inset of the top left corner in Figure 5(a). Here, one cylinder is immersed in free space and the PML replaces outer free space in the simulation. According to the Mie theory [56], the absorption (abs), scattering (sca), extinction (ext) efficiencies as functions of α\alpha are shown in Figure 5(a). The sca (blue) and ext (red) curves are completely uniform and the EM absorption can be ignored. Moreover, point A is located near the 1st peak of the sca curve. The inset of the lower right corner shows the scattering electric field ∣Es∣\lvert E_s\rvert distribution of point A.

Scattering, absorption, and extinction efficiencies of an isolated cylinder, and spherical multipole scattering efficiencies

Figure 5. (a) Scattering (sca), absorption (abs), extinction (ext) efficiencies of an isolated cylinder. Geometry and polarized plane EM wave excitation are displayed in the top left corner. Normalized scattering electric fields ∣Es∣\lvert E_s\rvert at point A is shown in the lower right corner. (b) Scattering efficiencies (SEs) of spherical multipoles of the isolated cylinder.

To reveal the principle of the MM, the semianalytical scattering multipole decomposition can be carried out in Cartesian bases based on displacement current density expressed as [57]

J(r)=−iωε0[ε(r)−1]E(r),(1)\mathbf{J}(\mathbf{r})=-i\omega\varepsilon_0[\varepsilon(\mathbf{r})-1]\mathbf{E}(\mathbf{r}), \tag*{(1)}

where r\mathbf{r} is local coordinate, ω\omega is the incident angular frequency, ε0\varepsilon_0 is vacuum permittivity, ε(r)\varepsilon(\mathbf{r}) is position-dependent relative permittivity, and E(r)\mathbf{E}(\mathbf{r}) is the total electric field. The basic Cartesian multipole moments include [58, 59, 60], the electric dipole (ED), magnetic dipole (MD), magnetic quadrupole (MQ), MO. In addition, the little contribution of higher-order electric multipoles will be ignored [55]. The corresponding toroidal moments of residual terms of the basic Cartesian multipole moments aforementioned are also considered [59, 60, 61, 62], i. e. the toroidal electric dipole (TED), toroidal magnetic dipole (TMD), toroidal magnetic quadrupole (TMQ).

The scattering efficiency (SE) of the basic Cartesian multipoles and toroidal moments are shown in Figure 6(a). One can see that abundant Cartesian multipoles are excited in an air-Al2O3\mathrm{Al_2O_3} cylinder, especially the high-order magnetic responses MQ and MO. However, the scattering contributions of toroidal moments are little except for the TED. Interestingly, point P shows the equal contributions of Cartesian ED and TED, i.e. an anapole mode generated [63].Furthermore, a spherical multipole moment is calculated by the interference between the basic Cartesian multipole moment and the corresponding toroidal moment [59]. Figure 5(b) shows the obvious resonant SE curves of spherical ED (red), MD (green), MQ (blue), and the nonresonant curve of spherical MO (black). Point A is very close to the ED resonance and the resonances of the MQ and MD are overlapped. Summating the contributions of all discussed spherical multipoles can achieve an effective approximate curve [see Figure 6(b)] of the total SE curve (blue, in Figure 5(a)). Therefore, it can confirm the existence of MO mode at point A consistent with the ∣Es∣|\mathbf{E}_s| distribution. The interference of dominant ED resonance and other magnetic multipoles have generated the MM corresponding to point A.

Scattering contributions of Cartesian multipoles and spherical multipole scattering efficiency

Figure 6. (a) Scattering contributions of cartesian multipoles of an isolated cylinder. (b) SE is obtained by the summation of spherical multipoles contributions.

Scattering of multiple cylinders

Continually, we investigate the scattering properties of multiple cylinders. Figure 7(a) shows the SEs of NN (N=2,⋯ ,7N=2,\cdots,7) identical cylinders arranged along the xx-direction with equal spacing p0p_0 and the same incident excitation aforementioned. As NN increases, the SEs at point A change slightly because of the weak coupling between cylinders, the peak locations scarcely moving is due to the strong ED resonance of each cylinder. Consequently, the SEs at point A are hardly affected by multiple scattering.

Scattering efficiencies of identical and composite cylinders

Figure 7. (a) SEs of NN identical cylinders arranged in the xx-direction with the same p0p_0. (b) SE of two identical cylinders arranged in the yy-direction with the same h0h_0. ∣Es∣|E_s| at point A is shown in the top right corner. The scattering influence of relative position change between adjacent units, (c) and (d) SEs comparisons of identical two cylinders and composite units when varying pp and Δy\Delta y, respectively. The red dashed frame denotes a composite unit. In the insets, the red and green arrows correspond to the positive xx and yy directions, and black arrows represent the moving directions of adjacent particles. The minimal face spacing in the xx (or yy) direction is pp (or hh), and the center spacing in the yy-direction is Δy\Delta y.

Figure 7(b) shows the SE of two identical cylinders arranged along the yy-direction with spacing h0h_0. As a result, the SE of point A is significantly less than the cases of a single cylinder (blue curve in Figure 5(a)) and two arranged in the xx-direction (green curve in Figure 7(a)). The inset shows the ∣Es∣|\mathbf{E}_s| distribution of point A. One can see obvious coupling between the two cylinders, which is the reason for the SE decrease. Furthermore, a smaller scattering cross-section means less interaction between incoming wave and particle resulting in more transmission.

For discussing device response, it is necessary to study the scattering influence of relative position change between adjacent units. Each composite unit is constituted by two identical cylinders with spacing h0h_0 and moving synchronously see the red dashed frame in Figure 7(c) and Figure 7(d). Let us center attention on the cylinders at point A. Figure 7(c) shows SEs of identical two cylinders (N2, blue) and two composite units (N4, red) when the spacing pp changes in the xx direction. The N2 and N4 have almost the same SE when p∼0p\sim0, while N4 decreases significantly at point D with p=p0p=p_0 and the gentle range is much wider near this point. Therefore, near point D, the composite unit can much better suppress the scattering and maintain this feature even if there is a relatively horizontal position shift of the adjacent unit.

Figure 7(d) shows the SEs of N2 and N4, adjacent units having spacing p0p_0 in the xx-direction and moving oppositely in the yy-direction, where the composite unit has fixed spacing h0h_0. The Δy\Delta y is the center spacing in the yy-direction of two cylinders or composite units, which have the same initial heights. In the entire range of Δy\Delta y, two curves exhibit a similar trend yet N4 has a much lower SE. Consequently, the composite unit can also much greater suppress the scattering and maintain this feature although with the relative movement in the yy-direction.

Perturbation immunity

Next, we will discuss the EM responses of the bilayer metasurface facing possible disturbers in practical applications. In practice, the stacked metasurfaces will inevitably be affected by interlayer misalignment and position disorder perturbation [42, 45, 64, 65, 66, 67]. These lead to the stacked metasurfaces having to undergo difficulties in high-precision large-area fabrication and applications in large vibration and temperature variation scenarios. Hitherto, the rotation [68] and flip [69] disorder immunities in stacked metasurfaces have been discussed, however, there is still no effective way to solve the problems of interlayer misalignment and positional disorder perturbation.

Layer misalignment

Figure 8(a) shows the RR and TT curves of the bilayer metasurface corresponding to point B whereas the two MMs are misaligned. The inset illustrates the bottom MM is moving in the xx-direction, where the center spacing of two cylinders of the composite unit is Δx\Delta x and the variation range is within one unit cell. Here, the η\eta is about 1.11. Thus, with Δx\Delta x and EM dissipation increased, the TT transfers from the original maximum value to the null value of point F then to the second local maximum value of point G, while then the RR shows the opposite behavior.

R and T spectra and electric field distributions of the bilayer metasurface

Figure 8. (a) R and T spectra of the bilayer metasurface corresponding to point B with center misalign spacing Δx\Delta x in the xx-direction. (b)-(d) Electric field E distributions corresponding to points E, F, and G, respectively.

Figures 8(b)-8(d) demonstrate the E\mathbf{E} distributions at points E, F, G, respectively, where the k\mathbf{k} is the normally incident wave vector. The numbers around each cylinder in Figs. 8(b) and 8(d) represent six localized regions. Note that, ii (i=1,⋯ ,6i=1,\cdots,6) and i′i' are symmetrical about the horizontal axis when Δx=0\Delta x=0. The R is suppressed and T is enhanced for occurring the coupling between two cylinders of the composite unit in Figs. 8(b) and 8(d), however, the T is suppressed and R is enhanced due to nearly no coupling in Fig. 8(c). Importantly, symmetric region coupling (i.e. 5 and 5' in Fig. 8(b)) has a much stronger ability to suppress R and enhance T than the asymmetric coupling one (i.e. 4 and 5', 5 and 6' in Fig. 8(d)). Therefore, the bilayer metasurface maintains a good transmission as long as the interlayer coupling occurs even if there have layer misalignment.

position disorder perturbation

Now we introduce disordered position perturbation into finite wide bilayer metasurface and single-layer MM, which consist of 51 composite units and cylinders respectively. The bilayer metasurface corresponds to point B and the plane wave normally incident from above (the directions x⊥kx\perp k and y∥ky\parallel k). Under disorder perturbation in the xx-direction, Fig. 9(a) shows an arbitrary cylinder initially located at the red ring that probably moves to the left or right green ring with the distances of Δx1\Delta x_1 and Δx2\Delta x_2. For all cylinders, position disorder degree in the xx-direction is defined as

σx=max⁡{∣Δx1∣+∣Δx2∣p0}.(2)\sigma_x=\max\left\{\frac{|\Delta x_1|+|\Delta x_2|}{p_0}\right\}. \tag*{(2)}

Similarly, Fig. 9(b) describes disorder perturbation in the yy-direction and

σy=max⁡{∣Δy1∣+∣Δy2∣h0}.(3)\sigma_y=\max\left\{\frac{|\Delta y_1|+|\Delta y_2|}{h_0}\right\}. \tag*{(3)}

Figure 9(c) illustrates the schematic of the bilayer metasurface with the same σx\sigma_x in both layers, and Figure 9(d) shows the case with position perturbation in the yy-direction.

Figure 9(e) shows the numerical results of the response factor (ρ\rho) of the metasurfaces to different σx\sigma_x. For convenience, the ρ\rho is defined as the major EM response ratio of the disordered to the periodic metasurfaces, i.e. the ratio of R for MM and the ratio of T for bilayer metasurface. Therefore, the greater ρ\rho indicates the smaller change of EM responses of metasurfaces. Random position arrangement only in the bottom layer is RB, only in the top is RT, both in the bottom and top is RBT, and in the single-layer metasurface is RS. Each point and related error bar are the average value and standard error of ρ\rho of 10 samples with the same σx\sigma_x, respectively. Increasing σx\sigma_x, the ρ\rho of RS decreases rapidly, while the bilayer metasurfaces drop more slowly and exhibit much larger ρ\rho. Furthermore, the reduced 0th order transmission of RBT mainly transfers into the non-0th order radiations, while the reduced 0th reflection of RS mainly transfers into the 0th order transmission and the non-0th order radiations [see Figs. 10(a) and 10(b)]. In bilayer metasurfaces, the RB and RT are better than the RBT, the RB is consistent with the RT which indicates the disorder in any layer of the bilayer metasurface possesses almost the same EM response. Therefore, the bilayer metasurface has a better performance robust to position perturbation in the xx-direction.

As a verification, we measure the T of the disordered metasurfaces with σx=71.43%\sigma_x=71.43\% in the experiment. In Figure 4, the T of the RS is the black circle, the RB is the blue dot, the RT is the green dot, the RBT is the black dot. We approximately estimate the R of RS is 1-T, as the absorption of the cylinders is almost lossless. As a result, the reflection of single-layer MM decreases significantly, but the bilayer metasurfaces can maintain high transmission. The ρ\rho of the disordered metasurfaces are shown in another inset at the bottom of Figure 4. Therefore, the experimental results agree well with the numerical simulation, i.e. the high transmission of bilayer metasurfaces has better robustness. Similar to Figure 9(e), Figure 9(f) shows the ρ\rho of the metasurfaces to different σy\sigma_y. The best performing RB and RT change uniformly, and the RBT is still better than RS. However, for larger σy\sigma_y, RBT is no longer better than RS due to the larger spacing destroying the interlayer coupling that induces the high transmission. As a result, the RBT will generate the obvious 0th order reflection [see Figure 10(c)].

Figure 9. Schematics of the position perturbation (a) in the xx-direction and (b) in the yy-direction with the initial positions marked by red rings. The bilayer metasurface at point B with disorder perturbation (c) in the xx-direction keeping h0h_0 and (d) in the yy-direction keeping p0p_0. (e) ρ\rho of bilayer and single-layer metasurfaces with different disorder perturbation σx\sigma_x in the xx-direction. Each point and the related error bar correspond to the mean and standard deviation of 10 samples with the same σx\sigma_x, respectively. (d) ρ\rho concerning disorder perturbation σy\sigma_y in the yy-direction. (g) and (h) SEs of two identical cylinders of a composite unit when Δx\Delta x and hh vary.

Far-field electric field intensity in all directions for RBT and RS concerning $\sigma_x$ and $\sigma_y$

Figure 10. Far-field electric field intensity in all directions of (a) RBT concerning σx\sigma_x, (b) RS concerning σx\sigma_x, (c) RBT concerning σy\sigma_y, and (d) RS concerning σy\sigma_y.

To understand the robustness of the bilayer metasurface, we discuss the scattering of two cylinders of the composite unit with positional perturbations. In Figure 9(g), the top cylinder is fixed and the bottom cylinder moves along the positive xx-direction, where the spacing h0h_0 is fixed. The SE at point H equals that at point A in Figure 5(a). Note that the same SE curve will be achieved when the bottom moves along the negative xx-direction. Figure 9(h) shows the SE of the two cylinders with relative move in the yy-direction. The SEs at points I, J are equal to that of point A in Figure 5(a). Point B is very close to the minimum of SE, which indicates symmetrical coupling at point B can best suppress scattering. Therefore, the bilayer metasurface is more robust than the single-layer case because the composite unit can maintain the relatively lower scattering with a certain degree of position perturbation, especially in the xx-direction which has a greater tolerance.

Conclusions

We have presented a prototype of a tunable bilayer metasurface stacked by two identical MMs consisting of infinitely long air-Al2O3\mathrm{Al}_2\mathrm{O}_3 concentric cylinders in a parallel arrangement. The MM is a high reflection with large-scale near-field electric enhancement, where each cylinder excites significant ED resonance and other magnetic multipole modes. The bilayer metasurface exhibits dynamical and near-equal intensity interconversion between high reflection and high transmission by flexible adjusting interlayer spacing. Reducing the spacing promotes the interlayer coupling leading to the suppression of the scattering and the achievement of high transmission, however, increasing the spacing weakens the interlayer coupling leading to the enhancement of scattering and the realization of high reflection. Moreover, symmetrical coupling of the two cylinders in the composite unit benefits the transmitted maximization. The transmission of the bilayer metasurface has good robustness due to the composite unit can maintain the scattering suppression whether the disordered position perturbation or the relative movement between the adjacent units. The microwave experimental measurement has verified the numerical result. The next step will be to perform further investigation of the other new features and applications of bilayer metasurfaces stacked by MMs. Our work demonstrates that stacking MMs is a simple and efficient way to design tunable metasurfaces, reveals the scattering properties of the stacking MMs, may shed new light on dynamic components for communication, sensing, logic photonic chips, and could promote us to design robust metasurfaces that can adapt to complex environments.

Acknowledgments

This work was supported by the National Natural Science Foundation of China (Nos. 11734012, 12074267, 62105213), the Science and Technology Project of Guangdong (No. 2020B010190001), the Guangdong Basic and Applied Fundamental Research Foundation (No. 2020A1515111037), and the Shenzhen Fundamental Research Program (No. 20200814113625003).

Disclosures

The authors declare no competing financial interest.

References

  1. [1][1]. N. Yu, F. Capasso, Flat optics with designer metasurfaces, Nat. Mater. 2014, 13, 139-150.
  2. [2][2]. Q. He, S. Sun, S. Xiao, and L. Zhou, High-efficiency metasurfaces: principles, realizations, and applications, Adv. Opt. Mater. 2018, 6(19), 1800415.DOI
  3. [3][3]. X. Yin, Z. Ye, J. Rho, et al. Photonic spin Hall effect at metasurfaces, Science 2013, 339(6126), 1405-1407.DOI
  4. [4][4]. W. Chen, K. Yang, C. Wang, et al. High-efficiency broadband meta-hologram with polarization-controlled dual images, Nano Lett. 2014, 14(1), 225-230.DOI
  5. [5][5]. M. Q. Mehmood, S. Mei, S. Hussain, et al. Visible-frequency metasurface for structuring and spatially multiplexing optical vortices, Adv. Mater. 2016, 28, 2533-2539.DOI
  6. [6][6]. N. Yu, P. Genevet, M. A. Kats, et al. Light propagation with phase discontinuities: generalized laws of reflection and refraction, Science 2011, 334 (6054), 333-337.DOI
  7. [7][7]. X. Zhang, Z. Tian, W. Yue, et al. Broadband terahertz wave deflection based on C-shape complex metamaterials with phase discontinuities, Adv. Mater. 2013, 25(33), 4567-4572.
  8. [8][8]. W. Sun, Q. He, S. Sun, et al. High-efficiency surface plasmon meta-couplers: concept and microwave-regime realizations, Light Sci. Appl. 2016, 5(1), e16003.DOI
  9. [9][9]. M. Khorasaninejad, F. Capasso, Metalenses: versatile multifunctional photonic components, Science 2017, 358(6367), eaam8100.DOI
  10. [10][10]. M. Khorasaninejad, W. Zhu, and K. B. Crozier, Efficient polarization beam splitter pixels based on a dielectric metasurface, Optica 2015, 2, 376-382.
  11. [11][11]. I. Staude and J. Schilling, Metamaterial-inspired silicon nanophotonics, Nat. Photon. 2017, 11, 274-284.DOI
  12. [12][12]. R. Paniagua-Domínguez, Y. Yu, A. E. Miroshnichenko, et al. Generalized Brewster effect in dielectric metasurfaces, Nat. Commun. 2016, 7,10362.
  13. [13][13]. P. Genevet, F. Capasso, F. Aieta, et al. Recent advances in planar optics: from plasmonic to dielectric metasurfaces, Optica 2017, 4, 139-152.DOI
  14. [14][14]. Y. Zhou, H. Zheng, I. I. Kravchenko, J. Valentine, Flat optics for image differentiation, Nat. Photonics 2020, 14, 316-323.
  15. [15][15]. J. Yan, X. Liu, C. Ma, et al. All-dielectric materials and related nanophotonic applications, Mater. Sci. Eng., R 2020,141, 100563.DOI
  16. [16][16]. M. Decker, I. Staude, M. Falkner, et al. High-efficiency dielectric Huygens’ surfaces, Adv. Optical Mater. 2015, 3, 813-820.
  17. [17][17]. A. I. Kuznetsov, A. E. Miroshnichenko, M. L. Brongersma, et al. Optically resonant dielectric nanostructures, Science 2016, 354, aag2472.
  18. [18][18]. Z. Ma, S.M. Hanham, P. Albella, et al. Terahertz all-dielectric magnetic mirror metasurfaces, ACS Photonics 2016, 3, 1010-1018.DOI
  19. [19][19]. L. Lin, Z. Jiang, D. Ma, et al. Dielectric nanoresonator based lossless optical perfect magnetic mirror with near-zero reflection phase, Appl. Phys. Lett. 2016, 108, 171902.DOI
  20. [20][20]. S. Liu, M. B. Sinclair, T. S. Mahony, et al. Optical magnetic mirrors without metals, Optica 2014, 1, 250-256.
  21. [21][21]. H. Song, L. Sun, B. Hong and G. P. Wang, Magnetic mirror by exciting magnetic quadrupole in dielectric metasurface, J. Opt. 2019, 21,125101.DOI
  22. [22][22]. S. B. Choi, D. J. Park, S. J. Byun, et al. Near-zero index: optical magnetic mirror for field enhancement and subwavelength imaging applications, Adv. Opt. Mater. 2015, 3(12), 1719-1725.
  23. [23][23]. J. Qin, D. Zhao, S. Luo, et al. Strongly enhanced molecular fluorescence with ultra-thin optical magnetic mirror metasurfaces, Opt. Lett. 2017,42, 4478-4481.
  24. [24][24]. Y. Liu, Y. Dai, Q. Feng, et al. Enhanced light-matter interactions in graphene-covered dielectric magnetic mirrors, Opt. Express 2017, 25, 30754-30763.
  25. [25][25]. P. Moitra, B. A. Slovick,W. Ji, et al. Large-scale all-dielectric metamaterial perfect reflectors, ACS Photonics 2015, 2(6), 692-698.DOI
  26. [26][26]. H. Song, L. Sun, G. P. Wang, Tunable perfect magnetic mirrors and retroreflectors in terahertz band, Opt. Express 2020, 28(1),753-759.DOI
  27. [27][27]. W. Liu, Generalized magnetic mirrors, Phys. Rev. Lett. 2017, 119, 123902.DOI
  28. [28][28]. A. K. González-Alcalde, M. A. G. Mandujano, R. Salas-Montiel, et al. Magnetic mirror metasurface based on the in-phase excitation of magnetic dipole and electric quadrupole resonances, J. Appl. Phys. 2019, 125, 243103.
  29. [29][29]. H. Song, N. Wang, K. Yu, et al. Disorder-immune metasurfaces with constituents exhibiting the anapole mode, New J. Phys. 2020, 22, 113011.
  30. [30][30]. S. Sun, Q. He, J. Hao, et al. Electromagnetic metasurfaces: physics and applications, Adv. Opt. Photonics 2019, 11(2), 380-479.
  31. [31][31]. M. L. Brongersma, The road to atomically thin metasurface optics, Nanophotonics 2021, 10(1), 643-654.
  32. [32][32]. D. Neshev, I. Aharonovich, Optical metasurfaces: new generation building blocks for multi-functional optics, Light Sci. Appl. 2018, 7,58.
  33. [33][33]. H. S. Ee and R. Agarwal, Tunable metasurface and flat optical zoom lens on a stretchable substrate, Nano Lett. 2016, 16(4), 2818-2823.
  34. [34][34]. C. Meng, P. C. V. Thrane, F. Ding, et al. Dynamic piezoelectric MEMS-based optical metasurfaces, Sci. Adv. 2021, 7, eabg5639.
  35. [35][35]. Y. Li, J. Van De Groep, A. A. Talin, et al. Dynamic tuning of gap plasmon resonances using a solid-state electrochromic device, Nano Lett. 2019, 19, 7988-7995.
  36. [36][36]. Z. Li, C. Wan, C. Dai, et al. Actively switchable beam-steering via hydrophilic/hydrophobic-selective design of water-immersed metasurface, Adv. Optical Mater. 2021, 9(17), 2100297.
  37. [37][37]. J. Li and L. Yang, Transmission and reflection bi-direction terahertz encoding metasurface with a single structure, Opt. Express 2021, 29(21), 33760-33770.
  38. [38][38]. Y. Hu, X. Ou, T. Zeng, et al. Electrically tunable multifunctional polarization-dependent metasurfaces integrated with liquid crystals in the visible region, Nano Lett. 2021, 21, 4554-4562.
  39. [39][39]. S. Zhu, Y. Cao, Y. Fu, et al. Switchable bifunctional metasurfaces: nearly perfect retroreflection and absorption at the terahertz regime, Opt. Lett. 2020, 45(14), 3989-3992.
  40. [40][40]. P. C. Wu, R. A. Pala, G. K. Shirmanesh, et al. Dynamic beam steering with all-dielectric electro-optic III-V multiple-quantum-well metasurfaces, Nat. Commun. 2019, 10, 3654.
  41. [41][41]. R. Mao, G. Wang, T. Cai, et al. Tunable metasurface with controllable polarizations and reflection/transmission properties, J. Phys. D: Appl. Phys. 2020, 53, 155102.
  42. [42][42]. S. Chen, Y. Zhang, Z. Li, et al. Empowered layer effects and prominent properties in few-layer metasurfaces, Adv. Optical Mater. 2019, 7, 1801477.
  43. [43][43]. Y. Li, J. Lin, H. Guo, et al. A tunable metasurface with switchable functionalities: From perfect transparency to perfect absorption, Adv. Optical Mater. 2020, 8, 1901548.
  44. [44][44]. H. L. Wang, H. F. Ma, M. Chen, et al. A Reconfigurable multifunctional metasurface for full-space controls of electromagnetic waves, Adv. Funct. Mater. 2021, 31(25), 2100275.
  45. [45][45]. Y. Zhou, I. I. Kravchenko, H. Wang, et al. Multifunctional metaoptics based on bilayer metasurfaces, Light Sci. Appl. 2019, 8, 80.
  46. [46][46]. T. Cai, S. Tang, B. Zheng, et al. Ultrawideband chromatic aberration-free meta-mirrors, Adv. Photonics 2021, 3(1), 016001.
  47. [47][47]. C. Liu, W. M. Yu, Q. Ma, et al. Intelligent coding metasurface holograms by physics-assisted unsupervised generative adversarial network, Photonics Res. 2021, 9(4), B159-B167.
  48. [48][48]. Q. Shi, X. Jin, Y. Fu, et al. Optical beam splitting and asymmetric transmission in bi-layer metagratings, Chin. Opt. Lett. 2021, 19(4), 042602.
  49. [49][49]. V. Su, C. H. Chu, G. Sun, et al. Advances in optical metasurfaces: fabrication and applications [Invited], Opt. Express 2018, 26(10), 13148-13182.
  50. [50][50]. X. Cai, R. Tang, H. Zhou, et al. Dynamically controlling terahertz wavefronts with cascaded metasurfaces, Adv. Photonics 2021, 3(3), 036003.
  51. [51][51]. Y. Yang, I. I. Kravchenko, D. P. Briggs, et al. All-dielectric metasurface analogue of electromagnetically induced transparency, Nat. Commun. 2014, 5, 5753.
  52. [52][52]. C. Liu, S. Wang, S. Zhang, et al. Active spintronic-metasurface terahertz emitters with tunable chirality, Adv. Photonics 2021, 3(5), 056002.
  53. [53]K. Z. Rajab, M. Naftaly, E. H. Linfield, et al. Broadband dielectric characterization of Aluminum Oxide (Al₂O₃), J. Micro. and Elect. Pack. 2008, 5, 101-106.
  54. [54]COMSOL Multiphysics® v. 5.2. cn.comsol.com. COMSOL AB, Stockholm, Sweden.
  55. [55]W. Liu, A. E. Miroshnichenko, Beam steering with dielectric metalattices, ACS Photonics 2018, 5, 1733-1741.
  56. [56]C. F. Bohren and D. R. Huffman, Absorption and Scattering of Light by Small Particles (John Wiley & Sons, New York, 2008).
  57. [57]P. Grahn, A. Shevchenko and M. Kaivola, Electromagnetic multipole theory for optical nanomaterials, New J. Phys. 2012, 14, 093033.
  58. [58]M. Timofeeva, L. Lang, F. Timpu, et al. Anapoles in free-standing III-V nanodisks enhancing second-harmonic generation, Nano Lett. 2018, 18, 3695-3702.
  59. [59]E. A. Gurvitz, K. S. Ladutenko, P. A. Dergachev, et al. The high-order toroidal moments and anapole states in all-dielectric photonics, Laser Photonics Rev. 2019, 13(5), 1800266.
  60. [60]W. Liu, J. Zhang, B. Lei, et al. Invisible nanowires with interfering electric and toroidal dipoles, Opt. Lett. 2015, 40, 2293-2296.
  61. [61]N. Papasimakis, V. A. Fedotov, V. Savinov, et al. Electromagnetic toroidal excitations in matter and free space, Nat. Mater. 2016, 15, 263-271.
  62. [62]H. Barhom, A. A. Machnev, R. E. Noskov, et al. Biological Kerker effect boosts light collection efficiency in plants, Nano Lett. 2019, 19, 7062-7071.
  63. [63]Baryshnikova, K. V.; Smirnova, D. A.; Luk'yanchuk, B. S.; Kivshar, Y. S. Optical anapoles: concepts and applications. Adv. Opt. Mater. 2019, 7 (14), 1801350.
  64. [64]E. Arbabi, A. Arbabi, S. M. Kamali, et al. MEMS-tunable dielectric metasurface lens, Nat. Commun. 2018, 9, 812.
  65. [65]Y. Wei, Y. Wang, X. Feng, et al. Compact optical polarization-insensitive zoom metalens doublet, Adv. Optical Mater. 2020, 8, 2000142.
  66. [66]A. Komar, R. Paniagua-Domínguez, A. Miroshnichenko, et al. Dynamic beam switching by Liquid Crystal tunable dielectric metasurfaces, ACS Photonics 2018, 5, 1742-1748.
  67. [67]Q. Shi, X. Jin, Y. Fu, et al. Optical beam splitting and asymmetric transmission in bi-layer metagratings, Chin. Opt. Lett. 2021, 19(4), 042602.
  68. [68]S. Fasold, S. Linß, T. Kawde, et al. Disorder-enabled pure chirality in bilayer plasmonic metasurfaces, ACS Photonics 2018, 5, 1773-1778.
  69. [69]H. Chu, X. Xiong, Y. Gao, et al. Diffuse reflection and reciprocity-protected transmission via a random-flip metasurface, Sci. Adv. 2021, 7, eabj0935.

Paper details

vlnc:W_2scvy5hh
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 4

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents