WorksPhysics and Astronomy
Intrinsic Angular Momentum Contribution to the Sagnac Response of a Rotating Helical Optical Fiber
Abstract
We investigate rotation-induced phase accumulation of structured light in a mechanically rotating uniform helical optical fiber using a four-component optical Dirac-like equation. In the paraxial and weak-geometry regime, the intrinsic dynamics contain a torsion-induced geometric coupling and a mechanical rotation–angular-momentum coupling. We show that, in a common-path mirror-reflection geometry, both the torsion-induced geometric phase and the conventional area-dependent Sagnac contribution cancel over a complete round trip, whereas the intrinsic rotation–angular-momentum phase survives. The surviving phase depends on the intrinsic total angular momentum of the structured optical mode and provides a common-path interferometric route for probing intrinsic angular momentum effects in rotational sensing.
Introduction
The conventional Sagnac effect is a rotation-induced spacetime effect and forms the fundamental operating principle of fiber-optic gyroscopes. For two counterpropagating optical fields, the resulting phase difference is determined by the oriented area enclosed by their trajectories and may be associated with the coupling of the mechanical rotation to the extrinsic orbital angular momentum (OAM) of the optical path [1, 2, 3, 4]. Structured light, however, also carries intrinsic angular momentum (AM), including spin angular momentum (SAM), primarily associated with polarization, and intrinsic OAM, associated with the spatial structure of the optical field. In particular, vortex beams with an azimuthal phase dependence carry a well-defined intrinsic OAM characterized by the integer topological charge [5, 6, 7, 8].
When the propagation direction or the optical environment varies in space, the intrinsic AM of light can become coupled to its trajectory. This interplay underlies a broad class of spin–orbit interaction phenomena, including the optical Magnus effect, the spin Hall effect of light, and OAM-dependent geometric transport [9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22]. In curved and twisted fibers, this geometric coupling is naturally described in a local moving frame, whose evolution follows the changing propagation direction and generates AM dependent corrections [16, 23, 24]. A distinct but closely related coupling arises from mechanical rotation, which acts directly on the AM carried by the optical field. This rotation–AM interaction manifests itself in the angular or rotational Doppler effect [25, 26, 27, 28, 29], and the role of optical OAM in rotating systems and rotational frequency shifts has been demonstrated both theoretically and experimentally with structured light [30, 31]. More generally, such effects are described by the rotation–AM interaction . The AM entering this interaction, however, contains physically distinct contributions. The extrinsic OAM is associated with the overall optical trajectory and underlies the conventional area-dependent Sagnac response, whereas the intrinsic part, , is carried by the internal spatial and polarization structure of the guided mode. In a rotating helical waveguide, where both the optical trajectory and the local propagation frame evolve, separating these extrinsic and intrinsic rotation-induced contributions becomes particularly important.
A convenient framework for separating these effects combines transformation optics with the Dirac-like formulation of Maxwell’s equations. Transformation optics maps curved-space electrodynamics onto an effective medium with geometry-dependent constitutive tensors [32, 33], while the wave-function formulation provides a compact operator description of optical angular momentum and its coupling to geometric and mechanical degrees of freedom[21, 34, 35, 36, 37, 38, 39]. Together, these approaches allow the torsion-induced and mechanical-rotation-induced AM couplings in a helical waveguide to be identified within a unified framework.
In this work, we develop such a description for structured light propagating in a mechanically rotating uniform helical optical fiber. Starting from the effective constitutive relations in the local Frenet frame, we derive a four-component optical Dirac-like equation and show that, in the leading paraxial and weak-geometry limit, the two dominant intrinsic AM couplings are and . Here is the torsion of the helical trajectory, is the longitudinal projection of the mechanical rotation, and is the intrinsic total AM along the local propagation direction. The torsion-induced term is branch dependent and gives rise to a geometric phase, whereas the mechanical-rotation term is branch independent and describes the direct coupling between mechanical rotation and the intrinsic AM of light.
To exploit this distinction, we consider a common-path mirror-reflection configuration in which the optical field propagates through the helical fiber, is reflected at the end mirror, and retraces the same trajectory in the opposite direction. We show that the torsion-induced geometric phase is reciprocal and therefore cancels over the complete round trip. The conventional area-dependent Sagnac contribution likewise vanishes for the retraced path. In contrast, the phase arising from the intrinsic AM–rotation coupling survives the round trip. This isolates a net intrinsic AM contribution to the rotation-induced phase, which may be regarded as an AM correction to the conventional Sagnac response.
Dirac-like optical dynamics in a rotating helical fiber
We consider light propagating in a uniform helical optical fiber with constant curvature and torsion , while the entire fiber undergoes a rigid rotation about the global axis with angular velocity , as shown in Figure 1. Within the effective-medium description of the curvilinear rotating system, the mechanical rotation gives rise to a magnetoelectric coupling. The constitutive relations can be written as [40, 41, 42, 43, 44, 45]

Figure 1. Schematic of the common-path mirror-reflection configuration in a rotating helical fiber. A vortex mode propagates from to the end mirror and returns along the same helical trajectory after reflection. The forward and backward beams are indicated by the red and blue paths, respectively, and are interferometrically compared at . The inset shows the -plane projection of the helical trajectory, for which the forward and backward paths circulate in opposite directions about the axis.
where . For later convenience, we introduce the cross-product operator . In terms of this operator, Eq. (1) can be inverted perturbatively. To first order in the mechanical rotation, one obtains
The inverse constitutive tensors are determined by the effective metric of the helical waveguide. We introduce the local Frenet coordinates , where is the arclength along the helical centerline, while denote the transverse coordinates in the local cross section. It is convenient to further introduce the circular transverse coordinates . In the corresponding helicity basis, the inverse constitutive tensors take the form [21, 46]
where
Let denote the helicity-basis representation of . The corresponding effective constitutive contribution then reads
with
To expose the Dirac-like structure, we introduce the four-component optical wave function [21, 37]
Following the derivation presented in Appendix § 6, the propagation of light in a rotating helical fiber is governed by the optical Dirac-like equation
where is the longitudinal momentum operator along the local propagation direction. Equation (8) makes explicit the two leading AM couplings,
The torsion-induced term gives rise to the geometric phase accumulated during propagation along the helical trajectory [12, 47, 48], whereas the mechanical-rotation term represents the rotation–AM coupling underlying the rotational Doppler effect [25, 26, 27, 28, 29, 38, 40]. All remaining terms, including the correction , transverse mode-mixing contributions, higher-order paraxial terms, and operator-ordering corrections, are higher-order geometric effects and are collected into . These terms can be treated perturbatively under the above weak-geometry conditions, and their explicit expressions are provided in Appendix § 6.
The spin and total AM operators along the local propagation direction are defined as
The two components and define the two eigensectors of the branch operator ,
In the leading paraxial limit, , which gives the dispersion relation , where here denotes the signed longitudinal wave vector. For a fixed sign of , the two sectors therefore correspond formally to the positive- and negative-frequency branches [35]. For the physical electromagnetic field, however, we restrict attention to the positive-frequency sector, . Reversing the propagation direction, must then be accompanied by , such that the product , and hence , remains positive. Accordingly, if is now used to denote the magnitude of the longitudinal wave vector, the forward- and backward-propagating solutions can be written as
where are constant field amplitudes. Both solutions correspond to the same positive physical frequency, with . Thus, within the positive-frequency sector, the and eigensectors of represent the forward- and backward-propagating modes, respectively.
Intrinsic Angular-Momentum-Induced Rotation Phase in a Common-Path Geometry
We now turn to the intrinsic AM-dependent rotation phase. To isolate this contribution, we consider the common-path mirror-reflection geometry shown in Figure 1. Light propagates from one end of the helical fiber, denoted by , to the opposite end , where it is reflected by a mirror and subsequently retraces the same helical path back to . The returned field is then interferometrically compared at . Although the two passages follow the same spatial trajectory, their projections onto the plane perpendicular to the rotation axis correspond to opposite azimuthal orientations with respect to . Therefore, each propagation segment acquires an extrinsic rotation-induced phase analogous to the Sagnac phase, with opposite signs for the forward and backward passages.
More generally, in a rotating reference frame the AM-rotation coupling can be written as
where denotes the extrinsic orbital angular momentum associated with the motion of the center of the optical path, whereas and denote, respectively, the intrinsic orbital and spin angular momenta of the guided optical mode. The conventional area-dependent Sagnac phase originates from the extrinsic contribution . In the present mirror-reflection geometry, the forward () and backward () passages are two successive propagation segments of the same optical field. The total extrinsic phase accumulated over the complete round trip is . Since the backward trajectory exactly retraces the forward path in the opposite direction, the corresponding line integrals have opposite orientations, yielding . Consequently, the extrinsic contribution vanishes, , as follows from the line-integral expression in Appendix § 7. As shown below, the torsion-induced geometric phase also cancels over the retraced path, leaving the intrinsic AM-rotation coupling as the remaining rotation-dependent contribution within the present approximation.
We next demonstrate how the torsion-induced geometric phase cancels in the mirror-reflection geometry. To describe both propagation directions consistently, we adopt the same fixed Frenet frame. Under ideal, mode-preserving normal reflection, the reflection operator satisfies
As derived in Appendix § 8, reflection exchanges the two propagation branches while preserving the intrinsic AM eigenvalue along the fixed Frenet axis. When referred to the actual propagation direction, however, the OAM and SAM quantum numbers both reverse sign.
Neglecting the mechanical-rotation term and the higher-order corrections, Eq. (8) reduces to
For the forward-propagating branch , which is an eigenstate of with eigenvalue , the corresponding dispersion relation is , where is the eigenvalue of the intrinsic AM along the fixed Frenet axis. For a monochromatic field with fixed physical frequency , the corresponding longitudinal propagation constant is therefore , where . The field accumulated over a propagation length is consequently
Thus, the torsion-induced geometric phase acquired during the forward passage is
After reflection at the end mirror, the propagation direction is reversed and the field is transferred to the opposite branch , for which has eigenvalue . Importantly, the intrinsic AM eigenvalue remains unchanged because both branches are described in the same fixed Frenet frame. Denoting by the magnitude of the backward longitudinal wave vector, the eigenvalue of in this frame is . The corresponding dispersion relation is therefore . For the same fixed frequency , this gives . Hence, during the backward propagation over the same physical length , the torsion-induced phase is
The geometric phase accumulated over the complete round trip therefore vanishes,
Such a cancellation of the geometric phase upon reflection and retracing of a helically wound fiber has also been demonstrated experimentally [3].
We now consider the intrinsic AM-dependent phase arising from mechanical rotation. Unlike the torsion-induced coupling , the mechanical-rotation coupling does not contain the branch operator . Since the intrinsic AM eigenvalue is preserved under reflection in the fixed Frenet frame, the forward-propagating mode acquires the phase
After reflection, the rotation-induced contribution retains the same sign,
The mechanical-rotation phase therefore accumulates constructively over the complete round trip,
The above analysis reveals a clear distinction between the torsion-induced geometric phase and the phase generated by mechanical rotation. Their different behaviors under reflection originate from the presence or absence of the branch operator . In the fixed Frenet representation, mirror reflection reverses the propagation branch while preserving the intrinsic AM eigenvalue . Consequently, the torsion-induced geometric phases cancel, whereas the intrinsic rotation-induced phases retain the same sign and add constructively. The behavior of the relevant phase contributions under propagation reversal is summarized in Table I.
| Interaction | Forward | Backward | Round trip |
Table I. Phase contributions for forward and backward propagation in the common-path mirror-reflection geometry.
The last two rows originate from the same fundamental rotation–AM coupling, , but represent its intrinsic and extrinsic sectors, respectively. The conventional Sagnac phase is associated with the extrinsic OAM of the optical trajectory. Reversing the propagation direction reverses the orientation of the corresponding line
integral, so that the extrinsic Sagnac phase changes sign and cancels over the retraced round trip. By contrast, the intrinsic total AM, , couples directly to the mechanical rotation and produces phase contributions of the same sign during the forward and backward passages. The intrinsic rotation-induced phase therefore remains nonzero after the complete round trip. The torsion-induced interaction is likewise reciprocal, but for a different reason: it explicitly contains the branch operator and hence changes sign between the forward- and backward-propagating sectors. Consequently, both the conventional area-dependent Sagnac phase and the torsion-induced geometric phase vanish in the retraced common-path geometry, whereas the intrinsic rotation–AM phase survives. The mirror-reflection configuration thus provides a natural means of isolating the rotation-induced phase associated with the intrinsic total angular momentum of the guided optical mode.
For a uniform helix, let . The tangential projection of the global rotation is , and the length and group delay over turns are and , respectively. In the leading-order, mode-preserving approximation, the intrinsic round-trip phase is
where is the axial pitch per turn and is the modal group velocity.
We consider a hollow perfect-electric-conductor (PEC) helical waveguide terminated by a PEC mirror. The helical section comprises one turn (), with , and is connected to a stationary input lead. The three-dimensional waveguide geometry and PEC boundary configuration are modeled using COMSOL Multiphysics. The modal scattering response is calculated by solving the vector Maxwell equations through spectral mode matching in the exact Frenet-coordinate metric of the helical geometry. The intrinsic rotational correction is retained to first order through . The transverse basis contains 340 TE/TM channels, including 83 propagating and 257 evanescent channels.
The rotation-induced same-mode return phase is defined relative to zero rotation by
Here is the complex reflection coefficient from the incident mode into the corresponding backward-propagating mode at the input port. The phase is continuously unwrapped along the sampled rotation-rate sweep starting from , thereby removing the common static propagation and mirror-reflection phases. The rotation-odd component is then extracted as
As shown in Figure 2, the rotation-odd phases reverse sign for opposite total angular momenta. At , the numerical results are
Figure 2. Rotation-odd modal return phases of a one-turn hollow PEC helical waveguide terminated by a PEC mirror. Symbols show vector-Maxwell spectral mode-matching results for TE input modes with ; dashed curves represent the leading mode-preserving prediction in Eq. (23). The 129 rotation samples span , with every fourth sample displayed. Parameters are , , , , , and . A stationary input lead of length is included. The spectral basis contains 83 propagating and 257 evanescent TE/TM channels, and only the first-order intrinsic rotation perturbation is retained.
The corresponding mode-preserving estimates are , , and rad, respectively. For and , the relative deviations are approximately and , demonstrating close
agreement with the leading-order single-mode propagation model.
A substantially larger discrepancy occurs for . At zero rotation, only of the incident power is reflected into the original mode, indicating strong depletion of the same-mode return channel. The projected reflection amplitude may therefore contain interfering contributions from multiple propagation and mode-conversion pathways. Consequently, its phase need not coincide with the propagation phase of an isolated mode and may become particularly sensitive to rotation under destructive interference. At the benchmark rotation rate, the deviation from the mode-preserving estimate reaches approximately rad. Increasing the transverse basis from 239 to 340 channels changes the extracted rotation-odd phases by no more than rad over the sampled rotation rates. The large discrepancy for is therefore consistent with a breakdown of the mode-preserving approximation rather than insufficient transverse-basis convergence. A definitive identification of the dominant mode-conversion pathways would require a mode-resolved analysis of the scattering matrix.
At the detection point , the total optical field is , where “ref” and “rt” denote the reference and round-trip returned fields, respectively. The detected optical intensity is proportional to the quadratic norm of the optical wave function,
where is a normalization factor determined by the modal normalization and detection scheme. Assuming that the reference and returned fields are mode matched at , their relative phase can be written as , where is the intrinsic rotation-induced round-trip phase and denotes the static background phase of the interferometer. Introducing the background intensity and the interference visibility for perfectly mode-matched fields, the normalized intensity variation at the quadrature point becomes
where and .
Previous Sagnac-based studies have demonstrated OAM-enhanced rotation-vibration measurements using a rotating Dove prism [49] and the interferometric characterization of vortex beams carrying different OAM states [50]. In contrast, the rotation-induced phase considered here arises from the coupling between the mechanical rotation of a helical waveguide and the intrinsic total angular momentum of the guided field. This mechanism provides a possible route toward rotation sensing that exploits both the OAM and helicity degrees of freedom, without requiring a rotating Dove prism. In particular, the contributions of orbital and spin angular momentum could, in principle, be distinguished by comparing the responses of modes with opposite topological charges or opposite helicities. For otherwise identical propagation conditions, the corresponding phase differences are
For comparison with the conventional Sagnac interferometer discussed in Eq. (71), the corresponding area-dependent phase is
Although the conventional area-dependent Sagnac contribution vanishes in the retraced common-path geometry, it provides a useful reference scale for assessing the relative magnitude of the OAM-dependent rotation phase. Retaining the part of Eq. (23) proportional to , we define
In particular, identifies a regime in which the intrinsic OAM-induced rotation phase becomes comparable to or larger than the conventional Sagnac phase. This opens up the possibility of exploiting high-order vortex modes in compact helical waveguides for rotation sensing, particularly in common-path configurations where the conventional area-dependent contribution cancels.
Conclusion
In conclusion, we have investigated the rotation-induced dynamics of structured light propagating in a mechanically rotating uniform helical optical fiber. Within an optical Dirac-like framework, we identified two distinct AM couplings: one originating from the geometry of the helical trajectory and the other from the mechanical rotation of the fiber. In the leading paraxial and weak-geometry regime, they reduce to a torsion-induced geometric coupling and a mechanical rotation–AM coupling, respectively.
A key distinction between these two contributions emerges in the common-path mirror-reflection geometry. The torsion-induced geometric phase changes sign between the forward and backward propagation branches and therefore cancels over a complete round trip. The conventional area-dependent Sagnac phase, which originates from the coupling of mechanical rotation to the extrinsic orbital motion of the optical trajectory, is likewise reciprocal for the retraced path and also cancels. In contrast, the coupling between mechanical rotation and the intrinsic AM of the guided mode contributes with the same sign during the forward and backward passages and consequently survives the round trip. The common-path configuration therefore suppresses the conventional area-dependent Sagnac background while retaining an intrinsic AM dependent rotation phase, thereby providing a direct way to distinguish intrinsic and extrinsic AM contributions to rotational optical phenomena.
These results extend the conventional Sagnac picture by showing that mechanical rotation can couple not only to the overall optical trajectory but also to the internal AM structure of the guided field. The present framework may provide a useful basis for exploring rotation sensing with structured light and for studying the interplay between geometric phases, OAM, SAM, and mechanical rotation in curved photonic systems.
Acknowledgments
This work was supported by the National Key R&D Program of China (grant No. 2024YFE0109802), the National Natural Science Foundation of China (grants Nos. 12175320,12375084), the Natural Science Foundation of Guangdong Province, China (Grant No. 2022A1515010280).
Derivation of the Optical Dirac-Like Equation in a Rotating Helical Fiber
The curved-coordinate description can be mapped onto an effective bianisotropic medium with constitutive relations
For a rotating system, the rotation-induced vector is generally , where denotes the spatial position with respect to the rotation axis. In the local Frenet description, we write
where is the helical centerline and is the displacement from the centerline within the local transverse cross section. For convenience, we introduce the cross-product operator . To first order in the mechanical rotation, the constitutive relations can be inverted as
Within the present transformation-optics description, , so that the rotation-induced contribution naturally involves the product .
We use the local Frenet frame , with tangent to the helical centerline, and decompose the mechanical rotation as . For a uniform helix rotating about the global axis,
In the corresponding local Frenet coordinates , the inverse constitutive tensor is [21, 46]
where . To make the helicity structure explicit, we transform from the local Frenet basis to the circular basis using
Accordingly, a vector is represented as , with . We similarly introduce the circular transverse coordinates . In this basis, the inverse constitutive tensor becomes
where . The circular components of the rotation vector are defined by .
Since the centerline contribution is associated with the overall orbital motion of the fiber and gives rise to the conventional extrinsic Sagnac response, it is treated separately below. Here we focus on the local intrinsic sector and, for brevity, define
The corresponding helicity components are
After transforming the cross-product operator to the same helicity basis, and retaining the notation for brevity, the effective rotation-induced constitutive matrix is
Direct multiplication gives
with
For the present axial rotation of a uniform helix, the geometric relation between the transverse and longitudinal components of allows to be reduced to
It is therefore useful to separate , where
Thus, the leading geometry-independent contribution is simply , whereas contains the finite-curvature and finite-torsion corrections.
We next introduce the circular momentum operators , with . They satisfy and . In the helicity basis, the curl operator takes the form
The rotation-induced Maxwell operator is therefore . In the Maxwell evolution equations, this operator contributes as . To display its structure compactly, we introduce
where the dot indicates that acts on the product of and the field to its right. The rotation-induced operator can then be written as
Because depends on the transverse coordinates, the transverse momentum operators do not in general commute with it. In particular, the combination appearing in the longitudinal component can be decomposed as
where is the OAM operator along the local propagation direction, and
Using (44), the ordering correction for the present axial rotation becomes
Let denote the characteristic transverse size of the guided mode. In the weakly curved and weakly twisted regime,
the geometry-dependent corrections are parametrically small,
Thus, to leading order in the weak-geometry expansion, , while both and contribute only perturbative geometric corrections. Moreover, since , the terms linear in primarily couple neighboring OAM channels, . For an approximately axisymmetric guided mode with a well-defined OAM quantum number , these terms do not contribute to the leading diagonal rotation-induced phase shift. They can therefore be consistently absorbed into the perturbative part of the effective Hamiltonian.
We next derive the optical Dirac-like equation for the electromagnetic field in the rotating helical waveguide. Using the effective constitutive relations in (32), together with
Maxwell's equations take the form
For either electromagnetic field, or , we first evaluate the rotation-induced contribution . Using the helicity-space representations of the curl operator and given in Eqs. (A10) and (A11), and eliminating the longitudinal field component through the transversality condition, the resulting transverse operator can be organized as
where is the total AM operator in the transverse two-component space, and . The operator describes the transverse mode-mixing contribution and can be written as
The remaining operator collects the ordering corrections generated by transverse derivatives acting on the coordinate-dependent coefficient , including the contribution defined in (51). Using the decomposition , (56) becomes
where . (58) therefore explicitly separates the leading rotation–AM coupling from the geometry-dependent, mode-mixing, and operator-ordering corrections.
In the absence of mechanical rotation, the intrinsic helical-waveguide contribution follows from the same procedure applied to . After eliminating the longitudinal component, the corresponding transverse Maxwell operator takes the form[21]
where contains the higher-order paraxial corrections,
The corresponding geometric coefficients are
Here, and denote the corresponding circular components of .
To expose the Dirac-like structure, we introduce the four-component optical wave function
Combining the intrinsic helical-waveguide contribution (A28) with the mechanical-rotation term (A27), we obtain the effective four-component Dirac-like equation
Here is the Dirac branch matrix, which in the present representation takes the form
so that the upper and lower two-component sectors correspond to the eigenvalues and , respectively. More generally, the coupling between mechanical rotation and optical AM takes the form . In the present formulation, the spatial coordinate and the associated rotation-induced vector have been separated into extrinsic and intrinsic parts. As a result, the term displayed explicitly in Eq. (63), , represents the leading longitudinal coupling between the mechanical rotation and the intrinsic AM of the guided mode. The remaining rotation-induced contributions, including those associated with the extrinsic orbital motion, are absorbed into the residual operator together with the higher-order geometric and paraxial corrections. The remaining subleading contributions are collected in
where the superscript (4) denotes the corresponding extension of the two-component transverse operators to the four-component space. In this representation, the spin and total AM operators along the local propagation direction are
Equation (A32) makes explicit the two leading AM-dependent interactions,
The first originates from the intrinsic torsion of the helical waveguide, whereas the second represents the coupling of the optical total AM to the mechanical rotation of the fiber. The remaining curvature-, torsion-, transverse-mode-mixing, and operator-ordering corrections are perturbative in the weak-geometry regime and .
Derivation of the Conventional Sagnac Phase from Extrinsic Orbital Angular Momentum
The conventional area-dependent Sagnac phase can be understood as the phase generated by the extrinsic part of the rotation–AM coupling,
Using , the interaction may equivalently be written as . In the semiclassical propagation picture, the corresponding phase is . Under the idealized Sagnac approximation adopted here, in which medium-drag and higher-order dispersive corrections are neglected, this reduces to
Thus, the conventional Sagnac phase can be viewed directly as the semiclassical manifestation of the extrinsic coupling .
For a uniform helix parameterized by and rotating about its axis with , one finds . Hence, propagation over turns gives the single-pass phase
For a conventional Sagnac interferometer, two counterpropagating beams traverse the closed optical path in opposite directions and are subsequently recombined at the output. Here, denotes propagation along the helical segment in the direction of increasing , whereas denotes the opposite direction. Reversing the propagation direction reverses the orientation of the line integral, so that . The measured phase difference is therefore
where is the projected oriented area associated with turns of the helical trajectory.
Mirror reflection and transformation of intrinsic angular momentum
We derive the transformation of the optical Dirac wavefunction and its intrinsic AM under mirror reflection. Both the incident and reflected fields are initially expressed in the same fixed Frenet frame . We consider ideal, locally normal, mode-preserving reflection in the paraxial limit.
For a perfectly conducting mirror at , the tangential electric field vanishes at the reflecting surface,
Thus, . From Faraday’s law, , and the reversal of the propagation direction , we obtain . For the locally transverse, mode-preserving approximation, the displacement field also satisfies . Using the optical Dirac wavefunction defined in the main text, the reflection conditions give
Hence, the reflection operator in the fixed Frenet representation is
The reflection operator is obtained in the leading paraxial, mode-preserving approximation. In the rotating effective medium, the magnetoelectric coupling may introduce first-order corrections to the transverse constitutive fields and hence to the reflection amplitudes. For a locally isotropic, impedance-matched medium, these corrections give a real reflection-amplitude factor and do not introduce an additional first-order reflection phase. We therefore neglect the corresponding amplitude corrections and assume that the end mirror does not induce additional mode mixing or AM-dependent reflection phases at the order considered.
Since , the reflection operator satisfies
Therefore, reflection exchanges the forward- and backward-propagating branches, . Both branches correspond to positive physical frequencies, since reversing the eigenvalue of is accompanied by the reversal of the longitudinal wave vector.
The intrinsic total AM operator along the fixed Frenet axis is , as defined in the main text. Because is independent of the transverse coordinates and acts only on the propagation-branch indices, it commutes with . Consequently,
Thus, the eigenvalue projected onto the original fixed Frenet axis is preserved under reflection.
For the propagation-referenced OAM and SAM operators, and , the reflection transformation yields
Consequently, the propagation-referenced total AM operator satisfies
For an incident mode satisfying , the reflected mode therefore satisfies
This transformation is consistent with the reversal of the propagation-referenced orbital angular momentum of reflected optical vortex beams, as discussed by Bliokh and Aiello [51]. For the ideal metallic mirror considered here, the helicity also reverses relative to the propagation direction, while the spin angular momentum projected onto the fixed Frenet axis is preserved. Accordingly, the OAM and SAM quantum numbers referred to the propagation direction transform as
This result is consistent with the conservation of in the fixed Frenet representation: mirror reflection preserves the AM projection onto the original axis but reverses its projection onto the actual propagation direction.
Finally, the two AM-dependent interactions, and , transform differently under reflection:
Therefore, the torsion-induced geometric phases cancel between the two propagation directions, whereas the intrinsic mechanical-rotation phases retain the same sign and accumulate constructively, as derived in the main text.
References
- [1]E. J. Post, Sagnac effect, Rev. Mod. Phys. 39, 475 (1967).DOI
- [2]J. Anandan, Sagnac effect in relativistic and nonrelativistic physics, Phys. Rev. D 24, 338 (1981).DOI
- [3]P. Senthilkumar, B. Culshaw, and G. Thursby, Fiber-optic Sagnac interferometer for the observation of Berry’s topological phase, J. Opt. Soc. Am. B 17, 1914 (2000).
- [4]H. C. Lefèvre, The fiber-optic gyroscope, a century after Sagnac’s experiment: The ultimate rotation-sensing technology?, C. R. Phys. 15, 851 (2014).DOI
- [5]L. Allen, M. W. Beijersbergen, R. J. C. Spreeuw, and J. P. Woerdman, Orbital angular momentum of light and the transformation of Laguerre-Gaussian laser modes, Phys. Rev. A 45, 8185 (1992).
- [6]L. Allen, M. J. Padgett, and M. Babiker, The orbital angular momentum of light, Prog. Opt. 39, 291 (1999).
- [7]A. M. Yao and M. J. Padgett, Orbital angular momentum: Origins, behavior and applications, Adv. Opt. Photonics 3, 161 (2011).DOI
- [8]S. M. Barnett, M. Babiker, and M. J. Padgett, Optical orbital angular momentum, Philos. Trans. R. Soc. A 375, 20150444 (2017).DOI
- [9]V. S. Liberman and B. Y. Zel’dovich, Spin-orbit interaction of a photon in an inhomogeneous medium, Phys. Rev. A 46, 5199 (1992).
- [10]K. Y. Bliokh and Y. P. Bliokh, Modified geometrical optics of a smoothly inhomogeneous isotropic medium: The anisotropy, Berry phase, and the optical Magnus effect, Phys. Rev. E 70, 026605 (2004).
- [11]M. Onoda, S. Murakami, and N. Nagaosa, Hall effect of light, Phys. Rev. Lett. 93, 083901 (2004).DOI
- [12]K. Y. Bliokh, Geometrical optics of beams with vortices: Berry phase and orbital angular momentum Hall effect, Phys. Rev. Lett. 97, 043901 (2006).pubmed.ncbi.nlm.nih.gov/16907574
- [13]O. Hosten and P. Kwiat, Observation of the spin Hall effect of light via weak measurements, Science 319, 787 (2008).DOI
- [14]K. Y. Bliokh, A. Niv, V. Kleiner, and E. Hasman, Geometrodynamics of spinning light, Nat. Photonics 2, 748 (2008).DOI
- [15]K. Y. Bliokh, Y. Gorodetski, V. Kleiner, and E. Hasman, Coriolis effect in optics: Unified geometric phase and spin-Hall effect, Phys. Rev. Lett. 101, 030404 (2008).DOI
- [16]K. Y. Bliokh, Geometrodynamics of polarized light: Berry phase and spin Hall effect in a gradient-index medium, J. Opt. A: Pure Appl. Opt. 11, 094009 (2009).DOI
- [17]K. Y. Bliokh, A. Y. Bekshaev, and F. Nori, Dual electromagnetism: Helicity, spin, momentum and angular momentum, New J. Phys. 15, 033026 (2013).DOI
- [18]K. Y. Bliokh, J. Dressel, and F. Nori, Conservation of the spin and orbital angular momenta in electromagnetism, New J. Phys. 16, 090337 (2014).DOI
- [19]K. Y. Bliokh and F. Nori, Transverse and longitudinal angular momenta of light, Phys. Rep. 592, 1 (2015).DOI
- [20]K. Y. Bliokh, F. J. Rodríguez-Fortuño, F. Nori, and A. V. Zayats, Spin–orbit interactions of light, Nat. Photonics 9, 796 (2015).DOI
- [21]L. Yang and L. Feng, Induced Berry connection and photonic spin Hall effect in optical Dirac theory, Phys. Rev. A 112, 013515 (2025).DOI
- [22]L. Yang, L. Feng, and P. Zhang, Gauge symmetry as the origin of spin–orbit coupling of light, Phys. Lett. A 590, 131848 (2026).arxiv.org/abs/2504.19501
- [23]C. N. Alexeyev, E. V. Barshak, A. V. Volyar, and M. A. Yavorsky, Angular momentum conservation and coupled vortex modes in twisted optical fibres with torsional stress, J. Opt. A: Pure Appl. Opt. 11, 094011 (2009).DOI
- [24]O. Yamashita, Geometrical phase shift of the extrinsic orbital angular momentum density of light propagating in a helically wound optical fiber, Opt. Commun. 285, 3061 (2012).DOI
- [25]B. A. Garetz, Angular Doppler effect, J. Opt. Soc. Am. 71, 609 (1981).
- [26]J. Courtial, K. Dholakia, D. A. Robertson, L. Allen, and M. J. Padgett, Measurement of the rotational frequency shift imparted to a rotating light beam possessing orbital angular momentum, Phys. Rev. Lett. 80, 3217 (1998).DOI
- [27]J. Courtial, D. A. Robertson, K. Dholakia, L. Allen, and M. J. Padgett, Rotational frequency shift of a light beam, Phys. Rev. Lett. 81, 4828 (1998).
- [28]B. Mashhoon, Modification of the Doppler effect due to the helicity–rotation coupling, Phys. Lett. A 306, 66 (2002).
- [29]J. C. Hauck and B. Mashhoon, Electromagnetic waves in a rotating frame of reference, Ann. Phys. 12, 275 (2003).
- [30]F. C. Speirits, M. P. J. Lavery, M. J. Padgett, and S. M. Barnett, Optical angular momentum in a rotating frame, Opt. Lett. 39, 2944 (2014).
- [31]M. P. J. Lavery, S. M. Barnett, F. C. Speirits, and M. J. Padgett, Observation of the rotational Doppler shift of a white-light, orbital-angular-momentum-carrying beam backscattered from a rotating body, Optica 1, 1 (2014).DOI
- [32]J. B. Pendry, D. Schurig, and D. R. Smith, Controlling electromagnetic fields, Science 312, 1780 (2006).
- [33]U. Leonhardt and T. G. Philbin, Transformation optics and the geometry of light, Prog. Opt. 53, 69 (2009).arxiv.org/abs/0805.4778
- [34]I. Bialynicki-Birula, Photon wave function, Prog. Opt. 36, 245 (1996).
- [35]O. Keller, On the theory of spatial localization of photons, Phys. Rep. 411, 1 (2005).DOI
- [36]S. M. Barnett, Optical Dirac equation, New J. Phys. 16, 093008 (2014).DOI
- [37]L. Feng and Q. Wu, Four-vector optical Dirac equation and spin-orbit interaction of structured light, Phys. Rev. A 106, 043513 (2022).arxiv.org/abs/2203.14664
- [38]L. Yang, P. Zhang, Y. Qi, and L. Feng, Photonic Kramers-like degeneracy and spin-orbital Hall effects of light, Ann. Phys. 492, 170557 (2026).DOI
- [39]L. Yang, L. Feng, and P. Zhang, Photons in media: A second-quantization scheme based on a Dirac-like equation (2026), arXiv:2606.23016 [physics.optics].arxiv.org/abs/2606.23016
- [40]L. L. Feng, M. Li, and R. Ruffini, Optical activity in a rotating frame of reference, Nucl. Phys. B Proc. Suppl. 6, 314 (1989).DOI
- [41]R. S. Hanni, Wave fronts near a black hole, Phys. Rev. D 16, 933 (1977).DOI
- [42]U. Leonhardt and T. G. Philbin, General relativity in electrical engineering, New J. Phys. 8, 247 (2006).
- [43]J. Plebanski, Electromagnetic waves in gravitational fields, Phys. Rev. 118, 1396 (1960).DOI
- [44]R. T. Thompson, S. A. Cummer, and J. Frauendiener, A completely covariant approach to transformation optics, J. Opt. 13, 024008 (2011).DOI
- [45]R. T. Thompson and J. Frauendiener, Dielectric analog space-times, Phys. Rev. D 82, 124021 (2010).DOI
- [46]S. Takagi and T. Tanzawa, Quantum mechanics of a particle confined to a twisted ring, Prog. Theor. Phys. 87, 561 (1992).
- [47]R. Y. Chiao and Y.-S. Wu, Manifestations of Berry’s topological phase for the photon, Phys. Rev. Lett. 57, 933 (1986).pubmed.ncbi.nlm.nih.gov/10034203
- [48]A. Tomita and R. Y. Chiao, Observation of Berry’s topological phase by use of an optical fiber, Phys. Rev. Lett. 57, 937 (1986).
- [49]S. Xiao, L. Zhang, D. Wei, F. Liu, Y. Zhang, and M. Xiao, Orbital angular momentum-enhanced measurement of rotation vibration using a Sagnac interferometer, Opt. Express 26, 1997 (2018).DOI
- [50]M. Aili, X.-X. Chen, P. Liu, J.-Z. Yang, X. Guo, J. Li, Z. Meng, Q.-Y. Wu, and A.-N. Zhang, Characterizing interference effects of vortex beams based on the Sagnac interferometer, Phys. Rev. A 106, 023715 (2022).DOI
- [51]K. Y. Bliokh and A. Aiello, Goos–Hänchen and Imbert–Fedorov beam shifts: an overview, Journal of Optics 15, 014001 (2013).DOI
