WorksPhysics and Astronomy
Phonon frequency comb close to an isolated Einstein mode in InSiTe3
Abstract
The emergence of phonon frequency combs exemplifies a rare and intriguing phenomenon in quantum solids. Materials with distinctive phonon band structures are especially promising for hosting such states, as their vibrational dispersion landscape across the Brillouin zone can facilitate the formation of long-lived, collective lattice excitations. In the layered Van der Waals compound InSiTe, polarization-resolved Raman spectroscopy reveals a pronounced anharmonicity in symmetry-predicted modes and the formation of a self-organized frequency domain structure (coherent-like state), in the range of a localized highenergy A phonon mode near 500 cm. This strong phonon-phonon coupling manifests itself as an anomalous temperature dependence around 200 K, coinciding with the appearance of higher-order excitations within the phonon density of states gap. These findings position InSiTe as an unconventional platform where intrinsic highly structured phonon spectral correlations and unusually strong anharmonic effects coexist, opening new avenues for exploring emergent vibrational phenomena in low-dimensional materials.
Introduction
Femtosecond pump–probe spectroscopy has long been the primary tool for generating and studying coherent phonons. In these experiments, an ultrashort laser pulse excites the lattice, initiating collective vibrational motion that can be tracked in real time.[1, 2, 3, 4] When a femtosecond laser pulse reshapes the electronic potential, the equilibrium atomic positions are displaced, leaving the atoms to oscillate coherently around the new minimum. This displacive excitation mechanism inherently favors fully symmetric modes. As a result, materials like bismuth and antimony consistently exhibit strong coherent phonons in pump–probe experiments, while lower-symmetry modes appear only under special conditions.[5, 6, 7] In contrast, finding equidistant closely separated phonon lines or a phonon comb without femtosecond excitation is unusual and reflects a nonlinear lattice potential.
Layered Van der Waals (VdW) materials, with their quasi-low-dimensional character, provide an important platform for studying emergent lattice, electronic, and magnetic phenomena.[8, 9] The class is broad, from transition metal trihalides (, ),[10, 11, 12, 13, 14] transition metal trichalcogenides (, ),[15, 16, 17, 18] iron-based tellurides ()[19] to transition metal dichalcogenides (VSe, MnSe).[20, 21] The acceleration in the discovery of such quasi-2D systems provides many opportunities to study phonon correlations and nonlinear phenomena as an intrinsic property of the lattice and at the same time to consider their potential for future applications.[22, 23, 24, 25] During the course of this research, Chen et al. reported the spontaneous formation of phonon frequency combs in CrSiTe and CrGeTe,[26] emphasizing the growing interest in the vibrational properties of ternary VdW trichalcogenides. These developments further emphasize the relevance of exploring related compounds such as InSiTe, where nonlinearities of the lattice potential may entail unconventional vibrational dynamics.
The first report of InSiTe single-crystal synthesis appeared more than three decades ago.[27] Since then, its related compounds such as CrSiTe, CrGeTe, InGeTe, and AlSiTe have been extensively studied, both theoretically and experimentally, for their magnetic, electronic, and vibrational properties.[28, 29, 30, 31, 32, 33] By contrast, only a few studies have addressed the fundamental properties of InSiTe.[28, 29, 34, 35] Nevertheless, it has already been applied in broadband photodetectors with ultrafast response times[36] which makes a deeper understanding of its lattice dynamics particularly relevant. Low-temperature experiments have not been performed on InSiTe, leaving certain aspects of the physical phenomena below room temperature unexplored.
In this work, we investigate the lattice dynamics of the VdW compound InSiTe using temperature-dependent polarization-resolved Raman scattering combined with density functional theory (DFT) calculations. Our study reveals a pronounced anharmonicity and the formation of frequency-domain phonon comb associated with a localized high-energy mode near 500 cm. This state reflects a frequency-locked spectral response of the SiTe tetrahedra, linked to a flat and isolated phonon branch. The temperature-dependent analysis further uncovers anomalous linewidth behavior around 200 K, together with large values of phonon coupling constants. Upon heating to this temperature, broad features emerge in the parallel scattering configuration within the gap of the calculated phonon density of states (PDOS), consistent with overtone excitations. These findings identify InSiTe as an important member of the of VdW family and underscore the role of anharmonic interactions in VdW trichalhogenides.
Results
The Raman measurements were performed on freshly cleaved surfaces. As shown in Figure 1 scanning electron microscopy (SEM) reveals a flat surface of at least 0.5 × 0.5 mm. The individual maps obtained with energy dispersive spectroscopy (EDS) as displayed on the left hand side of Figure 1 demonstrate the uniformity of the sample over several tens of microns and corroborate the atomic ratio of In:Si:Te to be 1:1:3. No impurities, contaminations and vacancies could be detected.

Figure 1. SEM and EDS mapping of a freshly cleaved surface of an InSiTe single crystal. The right part of the figure shows a flat surface over an extended area. The white rectangle indicates the area in which the EDS mapping was performed. The green, red, and turquoise areas on the left demonstrate the homogeneous distributions of the elements.
For the phonon analysis, the symmetry positions of the atoms in the lattice are relevant. The factor group analysis for the space group (No. 162)[37] yields the symmetry allowed phonons in the center of the Brillouin zone (BZ). The corresponding Raman tensors that govern selection rules are listed in Table 1. In our experiment, the plane of incidence is the -plane, where and . This plane is oriented perpendicular to the optical axis of the spectrometer, so that the light propagates along the -axis. The incident and scattered light polarizations, and , respectively, lie in the -plane, with corresponding to and corresponding to . In these two scattering configurations all allowed Raman active modes () can be observed. The doubly degenerate modes are observable in both parallel and crossed polarizations, whereas the fully symmetric modes vanish in configurations with crossed polarization. In
| Atoms (Wyckoff positions) | Irreducible representations |
| In () | |
| Si () | |
| Te () | |
| Raman tensors | |
Table 1. Atoms, Wyckoff positions, related point phonons, and Raman tensors for the space group.
addition to the experiments, density-functional theory (DFT) calculations were performed. The resulting frequencies of the optical phonons are in good agreement with the experimental values obtained at 80 K, as summarized in Table 2.
| Space group: (No. 162) | ||||
| Even () | Odd () | |||
| Symmetry | Exp. | Calc. | Symmetry | Calc. |
| - | 25.5 | 0 | ||
| 58.5 | 57.7 | 0 | ||
| - | 77.0 | 67.1 | ||
| 107.8 | 100.0 | 69.1 | ||
| 113.4 | 108.4 | 89.9 | ||
| - | 118.2 | 92.1 | ||
| 124.9 | 123.8 | 111.9 | ||
| 148.3 | 145.5 | 154.1 | ||
| - | 360.4 | 239.4 | ||
| 498.0 | 486.4 | 360.1 |
Table 2. Phonon symmetry, activity, experimental (80 K) and theoretical phonon frequencies (0 K) calculated using experimental crystallographic data. All values are given in . Silent modes are indicated by an asterisk.
Representative Raman spectra of InSiTe at 80 K and 300 K obtained for both parallel () and crossed () polarization configurations are shown in Figure 2 (a) and (b), respectively. All three modes and three out of the five expected modes appear as narrow lines. At 80 K the Raman spectrum in parallel scattering configuration [Figure 2 (a)] reveals two extra peaks in the energy range 450 to 500 labeled as and . Although weak in intensity, they are still distinctly observable on the low-energy side of the Raman-active mode. These additional two peaks and the phonon are equidistant and persist up to high temperatures, although they cannot be resolved any further as separate lines [Figure 2 (b) and Figure 6]. As seen in Figure 2(b), at 300 K additional excitations are observed in the parallel scattering configuration, appearing slightly below 200 cm and 300 cm.
Figure 2. Raman spectra of InSiTe in parallel () and cross () polarization configurations at (a) 80 K and (b) 300 K. The orange lines represent the phenomenological continua (see text). Inset of (a) InSiTe crystallographic unit cell with vectors of incident and scattered light polarizations and , respectively. For symmetry reasons the orientation of the polarizations with respect to the crystal axes and is irrelevant. Inset of (b) displacement pattern of mode. The arrow lengths are proportional to the square root of the inter-atomic forces. For this mode only the Si atoms move.
Figure 6. Raman spectra in the range of the mode at temperatures as indicated. The solid lines represent a Voigt profile fit to the data. All lines become wider with increasing temperature and shift simultaneously to lower energies while maintaining the distance. Inset: Localized vibrations of Te in the SiTe₃ tetrahedra associated to the mode.
For the quantitative analysis, the phonon peaks were modeled using a Voigt line shape, defined as the convolution of a Lorentzian and a Gaussian function. The Gaussian component, which accounts for the instrumental resolution of the spectrometer, was fixed to a linewidth of cm. To this end, the continuum was modeled phenomenologically using a Drude function together with a linear term: (orange lines in Figure 2) and was subtracted from the raw data, where , , and are temperature dependent phenomenological parameters. The resulting continuum is very weak and essentially constant within the phonon energy range. Figure 3 displays the results of the phonon analysis in parallel scattering configuration at 80 K.
Figure 3. (a)-(c) Phonon excitations modeled with Voigt profiles in parallel () polarization configuration where phonons of both and symmetry are observed. The spectra are recorded at 80 K.
We first focus on the low-lying modes, labeled and . The temperature dependencies of their energies and linewidths are displayed in Figure 4, with the vibration patterns shown in insets. For describing the linewidths, we use the Klemens model of symmetric anharmonic decay,[38]
Figure 4. Temperature dependences of the energies and Lorentzian linewidths of the and phonons. There are discontinuities of both the energies and linewidths close to 200 K. The dashed lines represent fits to the data below 200 K. The linewidths and energies are well described by anharmonic phonon decay (Eq. (1)) and thermal expansion, respectively.
where and were obtained by extrapolating linewidths and energies to the zero temperature limit. The phonon-phonon coupling parameter parametrizes the interaction between the optical (here Raman-active) phonon and the acoustical modes at and . The interaction may be mediated by electrons, spins or fluctuations.
At low temperatures and exhibit linewidths in the range of providing further evidence of the excellent crystal quality. Across the measured temperature range, the linewidths of and increase nearly by a factor of four. Up to 200 K the linewidths are well described by the symmetric anharmonic decay as described by Klemens[38] and described in Eq. (1). The temperature dependence indicates strong phonon–phonon coupling beyond 1, and .[39] In both cases, the next data points at 220 K is offset by more than a wavenumber, well beyond the statistical uncertainty. Up to room temperature the linewidths are essentially temperature independent. A similar (and consistent) discontinuity is observed for the energies. The cause of these discontinuities is presently unresolved, with no phase transition reported in this temperature range to the best of our knowledge.
Even so, the Raman spectra in the range between 80 and 350 exhibit an intensity anomaly in the same temperature range as shown in Figure 5. New features at 200 and 280 emerge with increasing temperature. Between 80 and 200 K these broad structures gain intensity slowly and gradually, while they double in intensity between 200 and 220 K and then remain constant up to 300 K. Upon inspecting the phonon dispersion and density of states (PDOS) (see inset of Figure 5) we conclude that these bands derive from the relatively flat bands in the range of 100 and the nearly dispersionless band slightly below 150 , mainly deriving from Te vibrations, and may be identified as 2-phonon excitations in the gaps of the phonon bands. Since these 2-phonon bands derive from phonons with energies on the scale of the thermal energy (140 K), one may speculate that thermally excited quasiparticles mediate an enhanced coupling between the low-energy Te modes. Then, the and Raman modes which just probe this increased coupling get more damped, and the linewidths increase while the energies decrease. Similar as for the Raman-active phonons, the coupling of all other modes increases across the entire Brillouin zone and boosts the two-phonon DOS. This electron-mediated coupling scenario would be consistent with the absence of any signature in the structure.
Figure 5. Raman spectra in the range between 80 cm and 350 cm at temperatures as indicated. The overtone excitations increase abruptly between 200 and 220 K in intensity. Inset: Calculated phonon dispersion along the high-symmetry directions as indicated and PDOS. The shaded area marks the gap in the PDOS.
The three equidistant lines in the range of the mode predicted by DFT are fitted with Voigt profiles and shown in Figure 3. In Figure 6 they are presented on an expanded energy scale for more temperatures, both along with Voigt profiles and the frequency combs model to be described below. DFT calculations suggest that the mode is an Einstein phonon with only Si atoms involved far above all other lines (see inset of Figure 5). However, instead of an isolated line we observe three equidistant lines in the energy range of the mode. All three peaks move to lower energy with increasing temperature. While the distances between the modes are essentially temperature independent, the widths increase substantially. Above 200 K the lines cannot be resolved as separate lines in the spectra but only via the fitting procedure (see Figure 6). When the resulting linewidths and energies are plotted as a function of temperature, no anomalies can be observed, as shown in Figure 7.
Figure 7. Temperature dependences of energies and linewidths of the mode and its satellites, and derived from three independent Voigt lineshapes. The equidistant colored dotted lines in (a) represent guide to the eye, with the theoretical difference of 4.2 cm of neighboring peaks. Solid lines in (b) represent the fit of the linewidth data to the anharmonic model (Eq. (1)).
The temperature dependences of all modes are well described by the Klemens model [Figure 7(b)–(Figure 7d)]. The linewidths increase by almost a factor of three over the investigated temperature range. The resulting phonon–phonon coupling parameters, , , and , are exceptionally large but consistent with the values found recently for phonon combs in CrSiTe.[26] The absolute magnitude of is not universal and may, in addition to the specific decay channels of the Klemens model, depend on the lattice potential, particularly at high temperature, or even on other decay channels.[39, 40, 41, 42] As a matter of fact, the lines become very narrow already at 80 K, the lowest temperature accessible in our experiment, indicating strongly reduced damping. Simultaneously, the lines in the comb become discernible and gain intensity.
On the basis of the increasing intensity and the equidistance of these lines, we employ a coherent-state formalism as a spectral description of the observed frequency-domain features to our spectra as proposed by Chen and coworkers.[26] Coherent states proposed first by Schrödinger[43] are widely used as a mathematical framework in superconductivity and laser physics to describe the superposition of a large number of oscillators. In the present context, this approach provides an effective description of the frequency components observed in the Raman spectra but does not imply the existence of a time-dependent coherent phonon expectation value in thermal equilibrium. Rather, it implies the simultaneous excitation of several oscillators[44] having a very long lifetime. This coherent state is described by an infinite superposition of oscillators,
where represents an effective parameter controlling the relative weight of the frequency components in the coherent-state-based spectral description. is proportional to the degree of anharmonicity in the Hamiltonian (See Supplementary Material). Eq. (2) provides the intensity of the frequency components and describes the distribution of the discrete frequencies and . To apply this model to describe our data, we replaced the Dirac delta with a Lorentzian having a finite linewidth convolved with a Gaussian for the resolution). The extracted energies and linewidths obtained from both the empirical fit and the applied model were nearly identical to within the error margins. A detailed comparison between the two approaches is presented in Figure 8.
Figure 8. Comparison of coherent-state–based spectral model and individual line model. At 80 K the statistical quality of the frequency comb is only marginally below that of the combination of the three individual lines. (see also Figure 6 and Supplementary).
Discussion
Coherent optical phonons are typically induced by ultrashort pump pulses. They oscillate in phase and produce distinct signatures in optical and Raman spectra.[45] However, equilibrium Raman spectroscopy probes frequency-domain phonon correlations. If the lattice potential has sufficiently strong anharmonic contributions and the phonons are long-lived, coherent-like spectral responses may arise in the absence of ultrafast excitation.[26]
In the case of InSiTe₃, the only phonon expected in the energy range around 500 cm⁻¹ is a motion of the Si atoms with a negligible involvement of the SiTe₃ tetrahedra (Inset of Figure 6). DFT predicts an isolated high-energy Einstein phonon as shown in the Inset of Figure 5. However, instead of a single isolated line a series of equidistant peaks is observed in the Raman spectra (Figure 6), reflecting the underlying nonlinear lattice dynamics. Phonon frequency combs have recently been reported in CrSiTe₃ and CrGeTe₃.[26] The comb-like structure was associated with the nonlinear response of a high-energy optical phonon that is spectrally well separated from other phonon states. In InSiTe₃, the mode is separated by a sufficiently large gap in PDOS. Because of this spectral isolation, the mode remains long-lived, as the available decay channels are strongly limited. As a consequence equidistant spectral components emerge.
An alternative explanation for persistent equidistant peak structure may be thermal "hot-band" progression arising from anharmonic vibrational ladders. For an anharmonic potential in second order perturbation theory we get relatively closely spaced energies at distances . The intensity of the -th satellite is expected to scale as , where cm corresponds to the energy of the phonon () at 80 K, and cm. As shown in Supplementary Fig. S1, the experimentally observed temperature dependences of the satellites at 493.8 cm () and 489.6 cm () deviate strongly from this expectation. This discrepancy allows us to exclude a thermal hot-band origin of the observed phonon frequency comb.
In addition, mechanisms based on the thickness or layer dependent quantization can be excluded in the present case.
References
All Raman measurements reported here were performed on bulk single crystals, where the macroscopic sample dimensions prevent the formation of discrete low-energy standing acoustic modes associated with finite-size confinement. In such confined geometries, the characteristic mode spacing is expected to scale with sample thickness or number of layers. No such dependence is observed here.
The satellite peaks observed in InSiTe are not related to phonon beating either. Phonon beating requires the coexistence of multiple distinct phonon modes with closely spaced frequencies, as demonstrated, for example, for the modes in CdAs induced by helix vacancies. [46] In contrast, for InSiTe one expects a single isolated optical phonon branch (Figure 6) with no nearby modes that could give rise to beating. The observed satellites therefore originate from the nonlinear lattice potential leading to additional eigenstates in second order perturbation theory[26] rather than independent phonon excitations.
In CrGeTe comb-like structures in the phonon spectra were observed recently and interpreted in terms isotope shifts. [47] In InSiTe, the isotope satellites were to be expected at 9 cm and 17 cm below the main line at 500 cm as opposed to 4.2 and 8.4 cm here, and their intensities and linewidths exhibit a systematic temperature evolution different from that expected for isotopes.
Finally, we wish to address the dilemma of the strong phonon-phonon coupling of the 500 cm modes derived via the Klemens model (Eq. (1)), suggesting a rapid decay, and the long lifetime required for phase coherence. As already pointed out above symmetric decay is not the only mechanism for line broadening. In an anharmonic potential the lines may get broader also by a stronger shift of a the resonance frequencies at elevated temperatures and a superposition of lines at different energies. At low temperatures there are barely any channels for the isolated Einstein mode (and possible satellites) to decay into low-energy phonons as obvious from the DFT phonon dispersion (Inset of Figure 5). The separation from the continuum of other vibrational states by a sufficiently large gap in the PDOS quenches all decay channels for symmetric decay. We conclude that the distortion of the harmonic potential required for the formation of the observed frequency comb does not originate from the anharmonic decay of the Einstein-like mode.
The temperature dependences of the fully symmetric low-energy peaks, and , change discontinuously in the vicinity of 200 K (Figure 4). Specifically the line widths do not follow the expected anharmonic variation any longer, indicating a change in phonon–phonon coupling. Along with these discontinuities at 200 K, two-phonon excitations (see Figure 5) become more pronounced. In the Raman spectra, structures beyond the allowed lines may originate either from defect-induced scattering, in which case the spectral features follow a projected PDOS, or from interactions in the material. [39] A comparison of the spectra with the calculated PDOS, in addition to the SEM analysis allow us to rule out the defect scenario. The fact that the two-phonon excitations appear exclusively in the channel is consistent with the selection rules for two-phonon scattering, where the direct product of two phonon symmetries always contains the totally symmetric representation. [39] The unusually strong coupling of the modes in InSiTe further enhances multi-phonon scattering in this channel, making the overtone features particularly pronounced. As the thermal phonon population and electron occupation increase, these higher-order processes become more probable and the overtones emerge clearly within the PDOS gap. By comparing their positions with the calculated phonon dispersion, the two-phonon features can be linked to low-energy PDOS maxima at roughly half the energies of 2- and 2- ( 95 and 145 cm, respectively), indicating contributions from acoustic or low-lying optical branches (Inset of Figure 5).
These observations reveal that the lattice dynamics of InSiTe are dominated by strong phonon–phonon interactions and give rise to pronounced anomalies near 200 K. Although a microscopic model for these features is still lacking, we propose that the thermal population of phononic and electronic states in this narrow-gap semiconductor drives these interactions. The appearance of overtone excitations within a PDOS gap supports this interpretation. The formation of a frequency comb, generated by coherent-like phonons and persisting across the full temperature range studied, suggests that the well-isolated Einstein phonon in InSiTe plays a central role in stabilizing highly structured vibrational spectrum. Together with recent reports of coherent-like phonon states in CrSiTe and CrGeTe, [26] our findings position Van der Waals trichalcogenides as promising platforms for discovering frequency combs in phonon spectra.
Methods
Experimental methods
Single crystals of InSiTe were synthesized by melting stoichiometric mixture of In (5N, Alfa Aesar) chunk, Si (5N, Alfa Aesar) lump, and Te (5N, Alfa Aesar) shot. The starting materials were vacuum-sealed in a quartz tube, heated to 1100°C over 20 hours, held at 1100°C for 12 hours and then cooled to 700°C at rate of 1°C/h.
Scanning electron microscopy was performed using FEI HeliosNanolab 650 scanning electron microscope (SEM) equipped with an Oxford Instruments energy dispersive spectroscopy (EDS) system with an X-max SSD detector operating at 20 kV. Measurements were performed on as-cleaved samples deposited on a graphite tape. To determine the presence of different elements, an area about the size of 100 × 100 µm was selected on the deposited material where the EDS analysis was performed. Inelastic scattering measurements of InSiTe were conducted using Tri Vista 557 Raman spectrometer in the subtractive backscattering configuration, with the combination of gratings 1800/1800/2400 grooves/mm. As an excitation source Ar/Kr ion laser with 514 nm line was used. In this scattering configuration plane of incidence is plane (, ) with incident/scattered light propagation direction along crystallographic -axis. The samples were cleaved right before being placed in a high vacuum ( mbar), which was achieved with a KONTI CryoVac continuous Helium Flow cryostat with 0.5 mm thick window. Laser beam focusing was accomplished using microscope objective with magnification to a spot size of approximately m. All Raman spectra were corrected for the Bose factor.
Theoretical methods
First-principles calculations based on density functional theory (DFT) were carried out using the Quantum ESPRESSO package.[48] The Perdew–Burke–Ernzerhof revised for solids (PBEsol) exchange-correlation functional[49] within the generalized gradient approximation (GGA) was employed to better describe lattice parameters in crystalline solids. The cutoff for wavefunctions and the charge density were set to 50 Ry and 400 Ry, respectively. The -points were sampled using the Monkhorst-Pack scheme, on a -centered grid. For accurate treatment of interlayer interactions, the Van der Waals interactions is included using the Grimme-D2 correction. Phonon frequencies were calculated with the linear response method, as implemented in Phonon package of the Quantum Espresso. The initial atomic structure of InSiTe was obtained from an experimental CIF file and used as the starting point for first-principles calculations. According to experimental crystallographic data, InSiTe exhibits trigonal symmetry and belongs to the (No. 162) space group. All calculations correspond to the harmonic approximation at zero temperature and do not include anharmonic or finite-temperature effects.
Data availability
Data are available upon reasonable request from the corresponding author.
Acknowledgements
Authors are grateful to Vladimir Damljanović for insightful discussions.
Funding
The authors acknowledge funding provided by the Institute of Physics Belgrade, through a grant from the Ministry of Science, Technological Development and Innovation of the Republic of Serbia, Project F-134 of the Serbian Academy of Sciences and Arts. This research was supported by the Science Fund of the Republic of Serbia, 10925, Dynamics of CDW transition in strained quasi-1D systems - DYNAMIQS. This work has received funding from the European Union’s Horzion Europe research and innovation programme under grant agreement No 101185375 (HIP-2D-QM). The collaboration between the Institute of Physics Belgrade and the IFW Dresden was supported by the German Academic Exchange Service (DAAD) through project 57703419 and the Ministry of Science, Technological Development and Innovations of the Republic of Serbia. DFT calculations were performed using computational resources at Johannes Kepler University (Linz, Austria). Materials synthesis was supported by the U.S. DOE-BES, Division of Materials Science and Engineering, under Contract DE-SC0012704 (BNL). Electron microscopy was performed at Jozef Stefan Institute, Ljubljana, Slovenia, under Slovenian Research Agency contract P1-0099. C.P. acknowledges financial support from Shanghai Key Laboratory of MFree, China (No. 22dz2260800) and Shanghai Science and Technology Committee, China (No. 22JC1410300).
Author contributions statement
A.M., S. Dj. M., T.B., J.B., R.H. and N.L. conducted the Raman experiments and analyzed the results. B.V. performed SEM measurements and analyzed the results. A.Š. and J.P. performed theoretical calculations. Y.L. and C.P. synthesized the sample and analyzed the results. E.S.B. and Z.V.P. analyzed the results. All authors were included in the writing and review of the manuscript.
Competing interests
The authors declare no competing interests.
References
- [1]Zeiger, H. J. et al. Theory for displacive excitation of coherent phonons. Phys. Rev. B 45, 768–778, 10.1103/PhysRevB.45.768 (1992).pubmed.ncbi.nlm.nih.gov/10001117
- [2]Vialla, F. & Fatti, N. D. Time-Domain Investigations of Coherent Phonons in van der Waals Thin Films. Nanomaterials 10, 10.3390/nano10122543 (2020).DOI
- [3]Misochko, O. V. Coherent phonons and their properties. J. Exp. Theor. Phys. 92, 246–259, 10.1134/1.1354682 (2001).DOI
- [4]Melnikov, A. A., Selivanov, Y. G. & Chekalin, S. V. Anharmonic coherent dynamics of the soft phonon mode of a PbTe crystal. Phys. Rev. B 108, 224309, 10.1103/PhysRevB.108.224309 (2023).DOI
- [5]Ishioka, K., Kitajima, M. & Misochko, O. V. Coherent A₁g and Eᵍ phonons of antimony. J. Appl. Phys. 103, 123505, 10.1063/1.2940130 (2008).DOI
- [6]Ishioka, K., Kitajima, M. & Misochko, O. V. Temperature dependence of coherent A₁g and Eᵍ phonons of bismuth. J. Appl. Phys. 100, 093501, 10.1063/1.2363746 (2006).DOI
- [7]Garrett, G. A., Albrecht, T. F., Whitaker, J. F. & Merlin, R. Coherent THz Phonons Driven by Light Pulses and the Sb Problem: What is the Mechanism? Phys. Rev. Lett. 77, 3661–3664, 10.1103/PhysRevLett.77.3661 (1996).pubmed.ncbi.nlm.nih.gov/10062276
- [8]Lazarević, N. & Hackl, R. Fluctuations and pairing in Fe-based superconductors: light scattering experiments. J. Physics: Condens. Matter 32, 413001, 10.1088/1361-648X/ab8849 (2020).DOI
- [9]Wang, Q. H. et al. The Magnetic Genome of Two-Dimensional van der Waals Materials. ACS Nano 16, 6960–7079, 10.1021/acsnano.1c09150 (2022). PMID: 35442017.DOI
- [10]Liu, Y. & Petrovic, C. Three-dimensional magnetic critical behavior in CrI₃. Phys. Rev. B 97, 014420, 10.1103/PhysRevB.97.014420 (2018).DOI
- [11]Huang, B. et al. Layer-dependent ferromagnetism in a van der Waals crystal down to the monolayer limit. Nature 546, 270–273, 10.1038/nature22391 (2017).DOI
- [12]Wang, Y.-P. & Long, M.-Q. Electronic and magnetic properties of van der Waals ferromagnetic semiconductor VI₃. Phys. Rev. B 101, 024411, 10.1103/PhysRevB.101.024411 (2020).DOI
- [13]Djurdjić Mijin, S. et al. Short-Range Order in VI₃. Inorg. Chem. 59, 16265–16271, 10.1021/acs.inorgchem.0c02060 (2020).DOI
- [14]Djurdjić Mijin, S. et al. Lattice dynamics and phase transition in CrI₃ single crystals. Phys. Rev. B 98, 104307, 10.1103/PhysRevB.98.104307 (2018).DOI
- [15]Ouvrard, G., Sandre, E. & Brec, R. Synthesis and crystal structure of a new layered phase: The chromium hexatellurosilicate Cr₂Si₂Te₆. J. Solid State Chem. 73, 27–32, 10.1016/0022-4596(88)90049-7 (1988).DOI
- [16]Zhang, X. et al. Magnetic anisotropy of the single-crystalline ferromagnetic insulator Cr₂Ge₂Te₆. Jpn. J. Appl. Phys. 55, 033001, 10.7567/jjap.55.033001 (2016).DOI
- [17]Milosavljević, A. et al. Evidence of spin-phonon coupling in CrSiTe₃. Phys. Rev. B 98, 104306, 10.1103/PhysRevB.98.104306 (2018).DOI
- [18]Milosavljević, A. et al. Vacancies and spin–phonon coupling in CrSi₀.₈Ge₀.₁Te₃. J. Raman Spectrosc. 51, 2153–2160, 10.1002/jrs.5962 (2020).DOI
- [19]Fei, Z. et al. Two-dimensional itinerant ferromagnetism in atomically thin Fe₃GeTe₂. Nat. Mater. 17, 778–782, 10.1038/s41563-018-0149-7 (2018).DOI
- [20]Bonilla, M. et al. Strong room-temperature ferromagnetism in VSe₂ monolayers on van der Waals substrates. Nat. Nanotechnol. 13, 289–293, 10.1038/s41565-018-0063-9 (2018).DOI
- [21]O’Hara, D. J. et al. Room Temperature Intrinsic Ferromagnetism in Epitaxial Manganese Selenide Films in the Monolayer Limit. Nano Lett. 18, 3125–3131, 10.1021/acs.nanolett.8b00683 (2018).DOI
- [22]Sierra, J. F., Fabian, J., Kawakami, R. K., Roche, S. & Valenzuela, S. O. Van der Waals heterostructures for spintronics and opto-spintronics. Nat. Nanotechnol. 10.1038/s41565-021-00936-x (2021).DOI
- [23]Yang, S., Zhang, T. & Jiang, C. Van der Waals Magnets: Material Family, Detection and Modulation of Magnetism, and Perspective in Spintronics. Adv. Sci. 8, 2002488, 10.1002/advs.202002488 (2021).DOI
- [24]Glavin, N. R. et al. Emerging Applications of Elemental 2D Materials. Adv. Mater. 32, 1904302, 10.1002/adma.201904302 (2020).DOI
- [25]Khan, K. et al. Recent advances in two-dimensional materials and their nanocomposites in sustainable energy conversion applications. Nanoscale 11, 21622–21678, 10.1039/C9NR05919A (2019).DOI
- [26]Chen, L. et al. Spontaneously formed phonon frequency combs in van der Waals solid CrGeTe₃ and CrSiTe₃. Nat. Commun. 16, 5795, 10.1038/s41467-025-61173-7 (2025).DOI
- [27]E. Sandre and V. Carteaux and A.M. Marie and G. Ouvrard. ChemInform Abstract: A New Lamellar Tellurosilicate, InSiTe₃. ChemInform 23, 10.1002/chin.199234029 (1992).DOI
- [28]Korkmaz, M. A., Deligoz, E. & Ozisik, H. Strong Elastic Anisotropy of Low-Dimensional Ternary Compounds: InXTe₃ (X = Si, Ge). J. Electron. Mater. 50, 2779–2788, 10.1007/s11664-021-08784-0 (2021).DOI
- [29]Lefevre, R. et al. Layered tellurides: Stacking faults induce low thermal conductivity in the new In₂Ge₂Te₆ and thermoelectric properties of related compounds. J. Mater. Chem. A 5, 19406–19415, 10.1039/C7TA04810F (2017).DOI
- [30]E. Sandre and V. Carteaux and A.M. Marie and G. Ouvrard. Structural determination of a new lamellar tellurosilicate, AlSiTe₃. J. Alloy. Compd. 204, 145–149, 10.1016/0925-8388(94)90083-3 (1994).DOI
- [31]Casto, L. D. et al. Strong spin-lattice coupling in CrSiTe₃. APL Mater. 3, 041515, 10.1063/1.4914134 (2015).DOI
- [32]Bhoi, D. et al. Nearly Room-Temperature Ferromagnetism in a Pressure-Induced Correlated Metallic State of the van der Waals Insulator CrGeTe₃. Phys. Rev. Lett. 127, 217203, 10.1103/PhysRevLett.127.217203 (2021).DOI
- [33]Watson, M. D. et al. Direct observation of the energy gain underpinning ferromagnetic superexchange in the electronic structure of CrGeTe₃. Phys. Rev. B 101, 205125, 10.1103/PhysRevB.101.205125 (2020).DOI
- [34]Suriwong, T., Kurosaki, K. & Thongtem, S. Thermoelectric properties of phosphorus-doped indium tellurosilicate: InSiTe₃. J. Alloy. Compd. 735, 75–80, 10.1016/j.jallcom.2017.11.093 (2018).DOI
- [35]Debbichi, L., Kim, H., Björkman, T., Eriksson, O. & Lebègue, S. First-principles investigation of two-dimensional trichalcogenide and sesquichalcogenide monolayers. Phys. Rev. B 93, 245307, 10.1103/PhysRevB.93.245307 (2016).DOI
- [36]Chen, J. et al. A Submicrosecond-Response Ultraviolet–Visible–Near-Infrared Broadband Photodetector Based on 2D Tellurosilicate InSiTe₃. ACS Nano 16, 7745–7754, 10.1021/acsnano.1c11628 (2022). PMID: 35499232.DOI
- [37]Jin, Y., Wang, R. & Xu, H. Recipe for Dirac Phonon States with a Quantized Valley Berry Phase in Two-Dimensional Hexagonal Lattices. Nano Lett. 18, 7755–7760, 10.1021/acs.nanolett.8b03492 (2018).DOI
- [38]Klemens, P. G. Anharmonic decay of optical phonons. Phys. Rev. 148, 845–848, 10.1103/PhysRev.148.845 (1966).DOI
- [39]Baum, A. et al. Phonon anomalies in FeS. Phys. Rev. B 97, 054306, 10.1103/PhysRevB.97.054306 (2018).DOI
- [40]Kumar, D., Kumar, V., Kumar, R., Kumar, M. & Kumar, P. Electron-phonon coupling, thermal expansion coefficient, resonance effect, and phonon dynamics in high-quality CVD-grown monolayer and bilayer MoSe₂. Phys. Rev. B 105, 085419, 10.1103/PhysRevB.105.085419 (2022).DOI
- [41]Tiwari, A. et al. Spin-phonon-charge coupling in the two-dimensional honeycomb lattice compound Ni₂Te₃O₈. Phys. Rev. B 108, 075113, 10.1103/PhysRevB.108.075113 (2023).DOI
- [42]Poojitha, B., Shaji, A., Badola, S. & Saha, S. Spin–phonon coupling in ferrimagnet spinel CoMn₂O₄. The J. Chem. Phys. 156, 184701, 10.1063/5.0087770 (2022).DOI
- [43]Schrödinger, E. Der stetige Übergang von der Mikro-zur Makromechanik. Naturwissenschaften 14, 664–666 (1926).DOI
- [44]Martin, R. M. & Varma, C. M. Cascade Theory of Inelastic Scattering of Light. Phys. Rev. Lett. 26, 1241–1244, 10.1103/PhysRevLett.26.1241 (1971).DOI
- [45]Zhai, Y., Gong, P., Hasaien, J., Zhou, F. & Zhao, J. Coherent phonons in correlated quantum materials. Prog. Surf. Sci. 99, 100761, 10.1016/j.progsurf.2024.100761 (2024).DOI
- [46]Sun, F. et al. Coherent helix vacancy phonon and its ultrafast dynamics waning in topological Dirac semimetal Cd₃As₂. Phys. Rev. B 95, 235108, 10.1103/PhysRevB.95.235108 (2017).DOI
- [47]Krasucki, G. et al. Spin-phonon coupling and isotope-related pseudo-molecule vibrations in layered Cr₂Ge₂Te₆ ferromagnet (2025). 2510.01881.arxiv.org/abs/2510.01881
- [48]Giannozzi, P. et al. Quantum espresso: a modular and open-source software project for quantum simulations of materials. J. Phy. Condens. Mat. 21, 395502, 10.1088/0953-8984/21/39/395502 (2009).DOI
- [49]Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized Gradient Approximation Made Simple. Phys. Rev. Lett. 77, 3865–3868, 10.1103/PhysRevLett.77.3865 (1996).pubmed.ncbi.nlm.nih.gov/10062328






