WorksPhysics and Astronomy
Magnetic localization and spectral asymmetry of a charged particle at a screw dislocation
Abstract
We study a charged particle moving outside a spiral (screw) dislocation in a uniform magnetic field. Although the geometry is locally Euclidean, its global screw identification couples the conserved axial and azimuthal quantities through the combination After eliminating the cyclic coordinates, the radial motion is governed by an inverse-square term determined by and a harmonic confining term generated by the magnetic field. The corresponding reduced quantum problem is exactly solvable for , yielding an equally spaced spectrum with an orientation-dependent energy shift. The radial probability density depends on , and opposite values of the screw-modified quantum number have identical spatial profiles but different energies for a fixed magnetic-field orientation. The radial size scales as , with the magnetic length setting the localization scale. At , the confining term vanishes, and the problem reduces to a scale-free inverse-square system. Thus, the screw parameter enters the dynamics through the global coupling of the conserved axial and azimuthal quantities, whereas the magnetic field provides radial confinement and its orientation determines the spectral asymmetry.
Introduction
Geometric defects provide a natural setting for studying particle dynamics in nontrivial geometries without introducing conventional external potentials, since the effects of elastic defects can be incorporated directly into the geometric structure of the medium [1, 2]. In condensed-matter and effective-geometric descriptions, elastic distortions of a medium can be represented by an effective metric, allowing the motion of particles and quasiparticles to be formulated in terms of geometric and gauge structures [2, 3]. Dislocations are of particular interest because their geometric description need not involve local Riemann curvature: within the geometric theory of defects, dislocations are associated with torsion [4], whereas disclinations are associated with curvature [1, 2]. A screw, or spiral, dislocation provides a simple realization of this structure; its embedding leads to a non-orthogonal metric, while the region outside the defect core is locally Euclidean and the nontrivial defect information is carried by torsion and the associated translational holonomy [5, 6]. Equivalently, the Volterra construction identifies the defect through a nontrivial global matching in which an azimuthal circuit is accompanied by a translation along the defect axis [6, 7]. This distinction between local flatness and global geometric structure is directly relevant to quantum dynamics: charged particles in a screw-dislocation background exhibit modifications of magnetic spectra, scattering, and phase effects when an external magnetic field or magnetic flux is present [8, 9].
This question has a well-established non-relativistic history. The coupling between a screw dislocation and a uniform magnetic field was first analyzed for an electron (or hole) in [5], where the infinite degeneracy of the Landau levels was shown to be broken by the topological boundary condition imposed by the defect; this Landau-type analysis was later extended to the simultaneous presence of a continuous distribution of disclinations, a screw dislocation, and a dispiration in [10], and to a continuous distribution of screw dislocations, whose effective dynamics mimics that of a particle in an external magnetic field, in [11]. Complementary non-relativistic studies addressed the quantum scattering of a charged particle by an isolated screw dislocation carrying an internal magnetic flux [8], the associated Aharonov–Bohm-type and Berry-phase effects [12], the solid-state analog of the He–McKellar–Wilkens phase for a quasiparticle moving in a charged screw-dislocation background threaded by a uniform magnetic field [13], and the scattering of an induced electric dipole by a charged screw dislocation under a uniform magnetic field [14]. Other confining interactions combined with the screw dislocation have likewise been treated non-relativistically, including a harmonic-oscillator potential [15, 16], a Tan–Inkson quantum-ring confinement in a rotating frame [17], an inverse-square-type interaction [18], and an inhomogeneous magnetic field with a finite-size defect core, where a missing-flux Aharonov–Bohm effect was identified [19]. The present work is set within this line of investigation, combining, in a single exactly solvable model, the screw-modified conserved momentum responsible for the geometric inverse-square barrier with the harmonic confinement generated directly by a uniform magnetic field.
The presence of a magnetic field requires that the electromagnetic structure be defined consistently on the defect geometry. In the geometric description of line defects, a screw dislocation is characterized by a nontrivial global identification associated with the Burgers vector, while its exterior geometry can remain locally flat [2, 20]. A uniform magnetic field specified in the ambient Euclidean space must therefore first be pulled back to the dislocation manifold, after which its coupling to a charged particle is determined by the intrinsic metric and minimal coupling [21, 22, 23]. The screw deformation does not modify the transverse form of the ambient gauge potential, but enters the intrinsic geometry through the screw-dependent axial one-form, thereby coupling the angular and axial momentum sectors geometrically while leaving the electromagnetic interaction inherited from the ambient field [8, 20, 21, 22, 23]. Consequently, a consistent treatment requires that the geometric embedding, global identification, gauge potential, and intrinsic field strength be specified before the particle dynamics is reduced. At the classical level, the azimuthal and axial coordinates are cyclic and therefore generate two conserved canonical momenta, but their relation is modified by the screw identification; fixing these conserved quantities reduces the dynamics to a radial degree of freedom on the exterior domain with the defect axis excluded from the configuration space. The excluded axis is physically significant because a closed circuit around the defect produces a finite axial translation determined by the Burgers vector, so global identification and associated winding sectors remain relevant even when the local Riemann curvature vanishes [2, 20]. Upon quantization, the corresponding reduced radial problem is defined on the half-line and requires a suitable boundary condition at the excluded axis together with normalizability at a large radius, making the reduced radial quantization distinct from a direct quantization of the unreduced three-dimensional system [21, 22, 23, 24]. In the presence of a magnetic field, the same global geometric structure is combined with the gauge coupling and produces a radial problem in which the angular and axial conserved quantities enter through a screw-dependent combination rather than as independent quantum numbers; related quantum analyses of magnetic flux in the presence of screw dislocations likewise show that the Burgers vector and electromagnetic flux can jointly affect the quantum spectrum and phase structure [8]. Thus, the classical Hamiltonian structure, radial motion, phase-space organization, winding sectors, and quantum dynamics can be formulated within a single geometric construction, with the effects of the dislocation arising from its intrinsic metric and global identification rather than from the introduction of an additional phenomenological potential at the defect core [2, 20].
The remainder of this paper is organized as follows. Section II introduces a Euclidean realization of the locally flat screw-dislocation geometry and establishes its intrinsic geometry, global screw identification, and Burgers vector. Section III constructs the electromagnetic gauge potential by pulling back a uniform magnetic field from the ambient Euclidean space to the defect geometry and determines the corresponding intrinsic field strength.
responding intrinsic field strength. Section IV develops the classical dynamics of the charged particle, identifies the conserved quantities, and reduces the system to the radial sector. The zero-energy condition is examined within the classical radial problem, while the phase-space structure, winding sectors, and topological properties of the spiral dislocation are analyzed in Section V. Section VI formulates the reduced quantum problem and obtains its bound-state solutions in the presence of a nonzero magnetic field, together with a separate treatment of the zero-field sector. Finally, Section VII discusses the physical implications of the classical and quantum descriptions developed in the preceding sections. Throughout this work, we adopt natural units .
Euclidean embedding and intrinsic geometry of a spiral dislocation
The geometry of a spiral dislocation is most naturally formulated as a Euclidean embedding supplemented by a nontrivial screw identification. Let denote cylindrical coordinates on the defect exterior, with , , and let be a constant with the dimensions of length. On the universal cover of the defect exterior, the geometry admits the following Euclidean embedding
The parameter measures the axial displacement accumulated by the embedding as the angular coordinate winds around the defect axis. Figure 1 provides a three-dimensional Euclidean visualization of the global screw identification on the covering space, with the axial displacement representing the translational part of the defect holonomy. In the covering-space coordinates, a complete circuit in the angular coordinate is accompanied by the axial shift , so that . Thus, although the regular exterior is locally Euclidean, the angular identification is globally accompanied by a translation along the ambient direction. This global screw identification provides the geometric characterization of the dislocation. The coordinate tangent vectors obtained from Eq. (1) are

Figure 1. Three-dimensional Euclidean covering-space realization of a spiral (screw) dislocation for , described by , with , , and . The ambient Cartesian coordinates are , with , , and . A complete circuit at fixed and changes the ambient coordinate by , corresponding to the Burgers vector . The highlighted circuit has endpoints related by the screw identification and separated in the covering space by the displacement along the ambient direction. The corresponding vector marks the translational holonomy, while the vertical line denotes the ambient -axis through the excluded defect core. The figure represents the Euclidean covering-space geometry and does not introduce an additional physical spatial dimension.
The induced metric follows directly from the Euclidean ambient inner product , and is therefore
This form makes the geometric content particularly transparent. The screw parameter does not modify the radial line element or the coefficient of the ordinary azimuthal term; instead, it mixes the angular and axial directions through the globally nontrivial one-form . The local geometry is consequently Euclidean in a suitably adapted coordinate system, whereas the global identification retains the dislocation. In the coordinate basis , the metric and its inverse are [24]
The volume density is [24]
The inverse metric in Eq. (6) exhibits explicitly the angular-axial mixing generated by the screw parameter. At the same time, the determinant remains exactly , independent of . Hence the screw deformation changes the inverse metric without modifying the coordinate volume density. A useful way of exposing the local character of this geometry is to introduce, on any simply connected patch that does not intersect the defect axis, the adapted coordinate . Since , Eq. (5) becomes locally
Thus, on every regular simply connected patch with , the metric is locally identical to the Euclidean metric written in cylindrical coordinates. It does not, however, trivialize the global defect, because the coordinate transformation is not globally single-valued under a complete azimuthal circuit. Indeed, under , the adapted coordinate transforms as . Thus the standard cylindrical identification is equivalently expressed in the locally Euclidean coordinates as the screw identification
For a particle of charge , the electromagnetic gauge potential is the one-form
and the corresponding gauge holonomy around a closed azimuthal loop with is
The local flattening transformation and the global quotient must therefore be distinguished sharply. Local curvature detects only the differential geometry of the regular exterior, whereas the screw identification retains information that cannot be removed by a single globally defined smooth coordinate transformation [1]. The Levi-Civita connection associated with the induced metric is nontrivial. The Christoffel symbols are obtained from [1]
Since the metric coefficients depend only on , the only nonvanishing connection coefficients for are
The first two coefficients are the familiar connection terms associated with cylindrical coordinates. The last coefficient is generated directly by the screw-induced off-diagonal component . The nonzero Christoffel symbols do not imply a curved regular manifold. They characterize parallel transport in the chosen coordinate basis. The invariant local curvature is instead determined by the Riemann tensor [25],
Accordingly, one obtains For the radial–angular sector one obtains
The regular spiral-dislocation exterior is therefore locally Euclidean. In particular, there is no nonzero smooth curvature invariant proportional to in the regular region . The vanishing of the regular Riemann tensor must not, however, be interpreted as the absence of the dislocation itself. The defect is encoded in the global screw identification (9). The geometry is therefore locally flat but globally nontrivial. This distinction may also be expressed in terms of parallel transport. For any contractible loop contained entirely in the regular region, the vanishing of the Riemann tensor implies trivial local curvature holonomy. A loop that winds nontrivially around the excluded axis, however, probes the global quotient structure and retains the screw translation . Thus the defect information is topological or global rather than encoded in a smooth local curvature invariant. The global content can be characterized by the corresponding Burgers vector [1, 2]. For one complete winding around the defect axis, the axial displacement is
Hence the Burgers vector is directed along the screw axis. This quantity is invariantly associated with the global translational part of the screw holonomy. It survives in the locally flat description and therefore provides a direct measure of the defect that is not reducible to the regular scalar curvature.
Gauge Pullback and Electromagnetic Structure of the Spiral Dislocation
Having established the Euclidean embedding and intrinsic geometry of the spiral dislocation in § 1.1, we now determine the electromagnetic field induced on the defect by a uniform magnetic field in the embedding space (see also [21, 22, 23]). The construction is performed by pulling back the ambient electromagnetic gauge potential to the spiral-dislocation geometry. Throughout this section, denote Cartesian coordinates of the three-dimensional Euclidean embedding space, while denote the intrinsic cylindrical coordinates, related by Eq. (1). Thus is an independent intrinsic coordinate, while the screw deformation is encoded in the shifted ambient coordinate . Locally, and on the Euclidean covering space, this relation provides the corresponding embedding coordinates. Globally, the azimuthal identification is accompanied by the screw translation . For a uniform magnetic field directed along the positive axis (see Figure 2), we choose the symmetric gauge

Figure 2. Euclidean covering-space realization of the spiral (screw) dislocation, , with , , and , in a uniform ambient magnetic field with . The navy-blue arrows indicate the ambient magnetic-field direction, everywhere parallel to the ambient axis. The pulled-back field has coordinate component and locally measured magnitude , while the screw parameter enters the intrinsic geometry through the metric and the global screw identification.
for which . Let
Locally, provides the Euclidean realization of the intrinsic geometry. Globally, the map is understood on the covering space, with the screw identification . Since
the pullback of the ambient gauge potential is
Hence its intrinsic components are
The absence of an explicit dependence in is a direct consequence of the fact that the chosen ambient gauge depends only on the transverse Cartesian coordinates and . The screw parameter instead enters the intrinsic geometry through
Consequently, although the pulled-back gauge potential has no explicit dependence in this gauge, the charged-particle dynamics acquires dependence through the intrinsic metric and its inverse. The intrinsic field strength follows from the pullback of the ambient curvature two-form,
Using
we obtain
Therefore, the nonvanishing coordinate components are
The intrinsic metric obtained from the Euclidean embedding is given in Eq. (5). It is therefore natural to introduce the orthonormal coframe
for which . Accordingly, the corresponding dual orthonormal frame is
Since
the electromagnetic two-form takes the particularly simple form
Thus the magnetic field measured by a local orthonormal observer is
where is the vector dual to . The factor of in the coordinate component arises from the use of the coordinate one-form , whose proper orthonormal normalization is . In the orthonormal frame, the field strength is simply , so that the locally measured magnetic-field magnitude is . Importantly, the screw parameter does not alter the local magnitude of the imposed magnetic field. Instead, it modifies the relation between the coordinate and orthonormal angular directions, as seen explicitly from , while remains the unit longitudinal vector. The dependence consequently enters the charged-particle dynamics through the intrinsic metric and its inverse, rather than through a renormalization of . The gauge character of the construction follows directly from the pullback. Under an ambient Abelian gauge transformation,
the intrinsic gauge potential transforms as
The corresponding field strength is invariant:
Hence in Eq. (21) is gauge dependent and enters the charged-particle Hamiltonian through minimal coupling, whereas in Eq. (30) is gauge invariant and represents the physical electromagnetic field.
Finally, the global screw character of the geometry is encoded in the translational holonomy associated with an azimuthal circuit. For a loop at fixed and , the curve is closed in the physical quotient geometry, whereas its lift to the Euclidean covering space acquires an axial displacement. Indeed,
so that the corresponding Burgers vector is
Thus the translational part of the screw holonomy survives despite the vanishing of the regular Riemann curvature on the defect exterior. It provides a global characterization of the dislocation that is not captured by local scalar curvature invariants. This quantity is invariantly associated with the global translational part of the screw holonomy. It survives in the locally flat description and therefore provides a direct measure of the defect that is not reducible to the regular scalar curvature. Together, the gauge potential in Eq. (21), its gauge-invariant field strength in Eq. (30), and the intrinsic metric in Eq. (5) provide the complete electromagnetic and geometric input for the charged-particle dynamics developed below.
Charged Particle Dynamics on the Spiral-Dislocation Geometry
The intrinsic metric and the pulled-back electromagnetic one-form obtained in Secs. II and III completely determine the classical motion of a charged particle on the regular spiral-dislocation exterior. Since the Levi–Civita Riemann tensor vanishes identically for , the regular geometry does not generate an additional local curvature-induced force or an independent curvature potential. The mechanical effect of the dislocation instead originates from the non-orthogonal sector of the metric, whose off-diagonal component couples the azimuthal and axial motions. In the presence of the ambient uniform magnetic field, the electromagnetic interaction is fixed by the pullback derived in Sec. III; consequently, no additional -dependent contribution is to be introduced into the electromagnetic potential. The screw parameter therefore enters the dynamics geometrically, through the momentum coupling generated by the intrinsic metric, whereas the magnetic interaction is determined by the ambient field strength and its pullback. For a particle of mass and charge , the minimally coupled Lagrangian on the regular region is [21, 22, 23]
where, from Eq. (21),
Hence, the explicit Lagrangian reads
The magnetic term contains no explicit dependence because the ambient symmetric gauge depends only on the transverse coordinates and , as established in Sec. III. The screw parameter enters the particle dynamics through the intrinsic kinetic term . The canonical momenta are obtained directly from Eq. (39) [21, 22, 23]:
Because neither nor occurs explicitly in the Lagrangian, both are cyclic coordinates. Their conjugate canonical momenta are therefore conserved:
where denotes the conserved canonical azimuthal momentum and the conserved momentum conjugate to the intrinsic axial coordinate . Solving Eq. (42) for the axial velocity gives
or, equivalently,
The latter relation makes explicit that the coordinate velocity is not, in general, equal to the axial mechanical velocity measured along the orthonormal direction dual to . The combination , rather than alone, is the geometrically natural longitudinal velocity. It is useful to introduce the gauge-shifted azimuthal momentum
Using Eq. (41) together with , one obtains
and therefore
Thus, the quantity that governs the azimuthal mechanical motion is not the canonical momentum by itself, but the combination . This is the direct dynamical manifestation of the off-diagonal metric component : the screw geometry converts a portion of the conserved axial momentum into an effective shift of the azimuthal mechanical momentum.
The Hamiltonian is obtained by the Legendre transformation [21, 22, 23]
Using the inverse metric in (6), and the minimally coupled momentum , this Hamiltonian can be written as
In particular, the screw deformation does not generate an additional electromagnetic interaction: its contribution arises entirely from the inverse intrinsic metric. The magnetic field enters through the gauge-covariant momentum , while the dependence arises from the geometric coupling between the azimuthal and axial momentum sectors. Upon using the conserved quantities and , Eq. (46) gives
and the Hamiltonian becomes
The first term is the conserved axial kinetic contribution, whereas the remaining terms describe the reduced radial dynamics. It is therefore natural to define
so that
with
This decomposition separates the three distinct contributions to the radial potential. The first is the inverse-square term generated by the screw-shifted angular momentum , the second is a constant magnetic cross-term, and the third is the quadratic term responsible for magnetic confinement at large radius. The screw parameter therefore enters the radial problem only through the shifted conserved momentum , while the magnetic scale is determined by the ambient field through . Writing the conserved total energy as and separating the constant axial contribution gives
so that the radial Hamiltonian takes the one-dimensional form
The radial turning points are consequently determined by , or equivalently,
Introducing , the turning-point equation becomes
For , its two algebraic roots are
The product of the two turning-point radii is independent of the energy:
This energy-independent relation follows directly from the quadratic structure in and shows that the product of the two turning radii is fixed entirely by the competition between the magnetic scale and the screw-shifted angular momentum . Equivalently, their geometric mean is
The curvature of the reduced radial potential at the stationary point is
for and . Hence, the stationary point is not merely a local extremum but the unique strict global minimum of the effective radial potential on the regular domain . Evaluating Eq. (55) at gives
The minimum therefore depends qualitatively on the relative sign of the magnetic scale and the screw-shifted angular momentum . More explicitly,
Equivalently, the equilibrium radius can be written in the sign-independent form
For , the two terms entering the squared numerator of Eq. (55) can cancel exactly at the equilibrium radius,
so that the reduced radial potential attains its absolute minimum, . In contrast, when , the quantities and necessarily have opposite signs for every ; consequently, the condition has no physical solution. Exact cancellation is then impossible, and the radial potential remains strictly positive, with the nonzero minimum . The sign of thus determines whether the magnetic coupling can completely compensate the screw-shifted canonical angular momentum or instead leaves an irreducible positive radial-energy offset. The global character of this minimum is further clarified by the two asymptotic sectors of the effective potential. Directly from Eq. (55), the behavior near the excluded defect axis is
whereas at large radius one finds
Thus, for , the effective potential diverges as on approaching the excluded defect axis, while for it grows quadratically at large radius. These two asymptotic limits independently establish the radial confinement: the inverse-square sector prevents the trajectory from reaching the singular axis, whereas the magnetic quadratic sector prevents unbounded radial escape. Together with the strict positivity of Eq. (63), they demonstrate that the stationary point identified above is the unique global minimum of the radial dynamics on . The two asymptotic scales have distinct physical origins. The inverse-square barrier is controlled entirely by the conserved screw-shifted momentum so that the screw parameter modifies the strength of the short-distance barrier through the conserved combination of azimuthal and axial momenta, while leaving its universal scaling unchanged. By contrast, the large- confinement is governed by , and therefore originates directly from the ambient uniform magnetic field. The magnetic field fixes the coefficient of the asymptotic harmonic term without changing the local scaling of the geometric centrifugal sector.
The radial problem consequently exhibits a clean separation between the defect-induced momentum shift, encoded in , and the electromagnetic confinement scale, encoded in . This structure also makes transparent why the energy-independent turning point relation obtained in Eq. (61) is possible. The inverse-square divergence at small and the quadratic growth at large combine to produce a radial potential with a single finite minimum. Consequently, for energies above the minimum, the radial motion is bounded between two positive turning radii whenever the corresponding roots of the turning-point equation are real and positive. Their product remains fixed by the coefficients of the quadratic polynomial in and is therefore independent of the particle energy. The energy changes the location of the two turning points individually, but not their product, which is controlled solely by the competition between the magnetic scale and the screw-shifted angular-momentum scale .
Finally, the axial coordinate remains cyclic. The corresponding conserved canonical momentum is
For the gauge choice used here, , and with one obtains the result in Eq. (45). Thus, the conserved axial momentum is not associated with alone: the screw geometry locks the axial and azimuthal coordinate velocities into the invariant combination . The conserved quantity therefore represents the momentum conjugate to the cyclic coordinate , while the combination is the corresponding intrinsic screw-direction velocity. The screw dislocation consequently does not destroy axial momentum conservation; instead, it geometrically redistributes the conserved axial motion between the and coordinates. This coupling is precisely what produces the shifted combination in the radial sector and thereby transfers the global information carried by the screw geometry into the effective one-dimensional radial dynamics.
The radial equation of motion follows directly from the reduced Hamiltonian and can be written as
The two terms have complementary dynamical origins. The first is a short-distance repulsion generated by the conserved screw-shifted momentum , whereas the second is a linear restoring force generated by the ambient magnetic field through . Their competition fixes the finite equilibrium radius whenever and . Importantly, no independent term proportional to appears in the radial force. This is a consequence of the exact form of the regular spiral-dislocation metric: away from the defect core, the geometry is locally flat, while the nontrivial screw structure survives globally through the conserved combination . The electromagnetic contribution is likewise entirely determined by the pullback of the uniform ambient field and introduces no additional phenomenological -dependent force. Thus, the screw parameter influences the radial motion through the conserved momentum sector rather than through a separate local force term.
The role of the magnetic field becomes especially transparent in the field-free limit. For , the radial effective potential reduces to
and the large-radius restoring term disappears. The radial motion is then asymptotically unconfined, with
Nevertheless, for the excluded defect axis remains dynamically inaccessible because of the inverse-square barrier. Only in the simultaneous limit and does the reduced radial potential vanish identically, so that the radial degree of freedom becomes free on the regular domain . This limiting case cleanly separates the two mechanisms responsible for the nontrivial radial dynamics: the screw-induced momentum barrier and the magnetic confinement.
Combining the conserved momenta with the pulled-back electromagnetic connection gives
Equation (74) is the exact classical radial reduction of the minimally coupled charged-particle dynamics on the regular spiral-dislocation geometry. All dependence on the global defect structure is compressed into the conserved combination , while the electromagnetic scale is fixed by the ambient field through . The resulting one-dimensional problem therefore contains no additional curvature potential and no independent local -dependent force. Instead, the global screw holonomy shifts the effective angular momentum, while the uniform ambient magnetic field supplies the large-radius restoring scale. Their combined contribution produces the inverse-square short-distance barrier, the finite equilibrium radius, and, for nonzero magnetic field, the asymptotic quadratic confinement established above. In this sense, the nontrivial radial dynamics is generated not by local curvature of the regular exterior, but by the combined action of the global geometric momentum shift and the electromagnetic connection inherited from the ambient uniform field.
Zero-Energy Threshold and Screw–Magnetic Compensation
The radial potential derived in Eq. (55) admits a particularly transparent interpretation when written in its unexpanded form,
Because and on the regular exterior, Eq. (75) implies the strict non-negativity condition
Consequently, the lower bound of the reduced radial potential is reached at zero if and only if the numerator of Eq. (75) vanishes. The corresponding condition is
and therefore
A finite regular solution requires , which gives the existence condition
Thus, exact cancellation is possible only when the magnetic coupling and the screw-shifted conserved angular momentum have the same sign. When this condition is satisfied, the finite radius

Figure 3. Screw–magnetic confinement and zero-potential compensation on the regular spiral-dislocation exterior. The reduced radial dynamics is governed by Eq. (74). Unless stated otherwise, the reference parameters are , , , , , and , yielding and . (a) Effective radial potential for , , , , and at fixed , , and . The finite stationary radius is ; for the reference parameters, , so that coincides with the zero-potential radius . (b) Exact decomposition of Eq. (55) into the inverse-square screw-shifted centrifugal contribution , the -independent magnetic cross term , and the quadratic magnetic contribution . (c) Radial force obtained from Eq. (71), with the unique finite force-balance point for and . (d) Stationary radius as a function of the screw parameter, , with the critical value at which . At this value the finite-radius branch approaches ; since the defect axis is excluded from the regular exterior, this limiting point is not a regular finite-radius equilibrium. (e) Ambient magnetic field required to impose at a prescribed radius, , for , , , and . The reference point is . A finite zero of exists only in the sign-compatible sector , in accordance with Eq. (??). (f) Parameter-space map of the global minimum from Eq. (64) in the plane. The lines and separate regions with opposite signs of . The minimum is zero for , with a finite zero-potential radius for , whereas gives a strictly positive minimum. Throughout, the radial coordinate is restricted to the regular domain , with the defect axis excluded.
is a regular point of the configuration space at which
This zero has a direct dynamical meaning. According to the radial Hamiltonian given in Eq. (74), the condition coincides with the absolute minimum of the reduced radial potential. At the corresponding threshold energy, the radial kinetic term must also vanish, , so that the radial motion is stationary at . The zero is therefore not an ordinary crossing of the potential through the energy level; rather, it represents a degenerate radial turning point and, equivalently, the finite-radius equilibrium configuration identified by the minimum analysis above. The azimuthal and axial motions may remain nontrivial, since the conserved quantities and continue to govern the cyclic degrees of freedom. The compensation condition can also be expressed directly as a balance between the screw-shifted canonical angular momentum and the magnetic field contribution,
This form makes the geometric content of the threshold especially transparent. The screw dislocation does not generate an additional local radial force proportional to . Instead, its entire influence on the reduced radial sector is encoded in the globally shifted conserved quantity . The ambient magnetic field then supplies the radially growing contribution against which this shifted momentum can be balanced. The zero of the radial potential therefore occurs precisely when these two contributions cancel at a finite radius. For fixed nonzero , the orientation of the magnetic coupling is essential. If
then and have opposite signs for every , and the condition in Eq. (77) cannot be satisfied. The effective potential consequently has no finite zero and remains strictly positive, with its minimum given by Eq. (64). Hence, reversing the sign of at fixed , , and can switch the system between a finite-radius zero-potential branch and a strictly positive radial minimum. The threshold is therefore intrinsically orientation-selective: it depends on the relative sign of the ambient magnetic coupling and the screw-shifted momentum, rather than on their magnitudes alone. The finite-radius branch possesses a distinguished limiting point. From Eq. (80),
for fixed nonzero . Thus the zero-potential equilibrium is continuously driven toward the defect axis as the screw-shifted momentum is tuned to zero. However, the axis is excluded from the regular spiraldislocation exterior. Consequently, the limiting condition does not define an additional regular equilibrium. Rather, it marks the boundary of the finite-radius zero-potential branch, where that branch terminates at the excluded defect locus. For , the same condition takes the form showing explicitly that the endpoint is reached when the azimuthal canonical momentum is exactly compensated by the screw-induced axial momentum shift. The limiting behavior can also be seen directly from the effective potential. When ,
so that the potential approaches zero only in the excluded limit . For nonzero , the origin is therefore not a finite regular zero of the radial problem. The disappearance of the inverse-square sector at does not create a new equilibrium in the regular exterior; instead, it removes the centrifugal barrier while leaving the magnetic quadratic confinement intact. This limiting case provides a sharp distinction between a genuine finite-radius screw–magnetic compensation point and the singular boundary of the configuration space. It is also useful to distinguish the zero of the reduced radial potential from the total conserved energy of the particle. After eliminating the cyclic coordinates, the full Hamiltonian may be written as
Accordingly, the condition denotes a zero of the reduced radial potential, or equivalently the zero-threshold configuration of the radial sector. It does not imply that the total particle energy vanishes when . At the equilibrium point,
for the Hamiltonian convention used here. This separation is important: the threshold concerns the radial degree of freedom after the conserved axial motion has been isolated, whereas the full energy retains the independent contribution associated with the cyclic coordinate . The magnetic field required to realize a zero-potential configuration at a prescribed regular radius can be obtained directly from Eq. (82),
with the sign constraint . Hence the ambient field does not merely determine the strength of radial confinement; its magnitude and orientation jointly select the location and existence of the zero-threshold configuration. In particular, for fixed , , , and , the required field is set uniquely by the screw-shifted momentum . The significance of this threshold follows from the geometric construction of the problem. On the regular exterior, the Levi-Civita curvature vanishes identically, so there is no smooth curvature-induced potential capable of producing the compensation condition. The nontrivial geometric information instead survives globally through the screw identification and enters conserved dynamics through . Independently, the electromagnetic sector is inherited from the ambient uniform field by the pullback construction, fixing without introducing any additional local -dependent gauge interaction. The zero of is therefore generated by the exact competition of these two structures: . The finite-radius branch exists only for the sign-compatible sector , while its radius contracts continuously toward the excluded defect axis as . The resulting threshold is therefore a direct dynamical manifestation of the
global screw structure in an ambient uniform magnetic field, obtained entirely from minimal coupling and the intrinsic geometry, without the introduction of any phenomenological core potential or local curvature force.
Figure 3 summarizes the reduced radial dynamics obtained from Eqs. (52)–(57) and the zero-potential condition of Sec. IV A. On the regular domain , the exterior geometry is locally flat, so no curvature-induced radial force or curvature potential is present. The defect enters through the conserved combination of Eq. (53), whereas the magnetic scale is . For and , Eqs. (68) and (69) give as and . Together with the positivity of Eq. (63), this establishes a unique finite global minimum. Its position depends on only through . When , the minimum coincides with the finite zero of the reduced potential; when , the minimum remains strictly positive according to Eq. (64). Panel (a) shows the shift of the radial minimum with at fixed , , and . Panel (b) separates the inverse-square, constant, and quadratic terms of Eq. (55). The first controls the short-distance behavior, while the last determines the large-radius confinement. The constant term does not contribute to the radial force. Panel (c) shows the force from Eq. (71); its unique zero gives the stationary radius, whose stability follows from Eq. (63). Panel (d) shows the stationary radius as a function of . For , at , and the finite-radius branch approaches the excluded axis . This limiting point is not a regular equilibrium. Panel (e) shows the field required to impose a zero of the reduced potential at a prescribed radius, as given by Eq. (88), subject to the sign condition regarding . Panel (f) displays the corresponding minimum in the plane. The sectors and correspond, respectively, to zero and strictly positive radial minima.
The zero discussed here refers to the reduced radial potential, not to the total particle energy. From (86) and (87), the full Hamiltonian retains the axial contribution . Thus, the finite-radius threshold is a property of the radial sector, with its location fixed by the screw-shifted momentum and the magnetic coupling. The limits and remove, respectively, the large-radius magnetic confinement and the inverse-square barrier, as discussed in (72) and (85).
Phase-Space Structure, Winding Sectors, and Topology of the Spiral Dislocation
The preceding analysis reduces the charged-particle dynamics to an integrable system whose nontrivial radial structure is governed by the single screw-shifted momentum , while the cyclic coordinates and generate the conserved canonical momenta and . The resulting phase-space organization is therefore more informative than the radial potential alone, since it separates the continuous dynamical invariants from the discrete topological information carried by the screw geometry. In particular, the local flatness established in Sec. II does not imply global triviality. The excluded defect axis and the screw identification generate noncontractible winding sectors that remain dynamically meaningful even though the regular Riemann tensor vanishes identically. The regular spiral-dislocation exterior is consequently locally Euclidean but globally multiply connected. For a closed winding with
the screw identification gives
where is the axial Burgers translation associated with one complete winding. Thus, the Burgers translation introduced in Eq. (16) is the translational generator associated with one complete winding. The integer labels the homotopy class, while determines the axial displacement associated with that winding. The screw parameter therefore encodes a global relation between angular winding and axial translation rather than an additional local curvature source. Because and are cyclic coordinates in the Hamiltonian derived in § 3, the quantities
are conserved. Nevertheless, the radial dynamics does not depend on and independently. Their geometrically relevant combination is the screw-shifted momentum , as established in Eq. (74). Once are fixed, the full phase-space motion consequently reduces to a one-degree-of-freedom radial flow in the plane, together with the reconstruction of the cyclic coordinates. The reduced radial momentum follows directly from the Hamiltonian constraint and can be written as
For and , the inverse-square divergence as and the quadratic growth as , established in Eqs. (68) and (69), confine finite-energy radial motion to a finite interval whenever the energy exceeds the radial minimum. The two branches of Eq. (92) meet at the turning points and form a closed orbit in the reduced radial phase plane. The equilibrium configuration is represented by the fixed point
with determined by the minimum condition already established in § 3. This fixed point belongs to the regular configuration space only when ; the limit instead drives it toward the excluded boundary . For a closed configuration-space trajectory, the winding number can equivalently be expressed as
This integer should be regarded as a topological label rather than as an additional continuous integral of motion. The continuous dynamical invariants are , , and , whereas specifies the homotopy class of the associated closed configuration-space trajectory. The reconstruction of the full orbit further reveals how the global screw structure enters the observable motion. The angular and axial velocities are determined by the conserved quantities and involve the same screw-shifted combination . Consequently, a radial oscillation is accompanied by correlated azimuthal motion and axial displacement. For a trajectory with winding number , the corresponding screw translation in the lifted embedding space is given by Eq. (90). The particle therefore follows a helical family of lifted trajectories even though the regular intrinsic geometry is locally flat. The parameter is consequently observable through the global reconstruction of the orbit rather than through a local curvature force. The same topological structure also enters the gauge sector through the holonomy of the electromagnetic one-form. For a uniform axial magnetic field, the gauge contribution accumulated over a winding sector is proportional to the enclosed oriented area and takes the form
with the overall sign fixed by the orientation convention adopted for the loop and the gauge potential. The integer therefore determines the winding multiplicity of the electromagnetic action contribution, while the magnitude of the contribution is continuously controlled by . Topology and electromagnetism thus remain distinct: the former determines the homotopy class of the loop, whereas the latter determines the gauge phase accumulated along that loop.
The phase-space structure is particularly transparent at the zero-energy compensation point discussed in § 3 A. The finite-radius zero of the reduced radial potential exists only in the sign-compatible sector
where the magnetic contribution can compensate the screw-shifted momentum at a regular radius. As , the equilibrium radius contracts according to the result established previously and approaches the excluded defect axis. Hence, the disappearance of the inverse-square barrier does not provide a continuous dynamical path connecting different winding sectors. Instead, the finite-radius branch terminates at the boundary of the regular configuration space. The compensation mechanism therefore modifies the radial phase-space structure without removing the underlying topological classification.
The global organization of the dynamics can consequently be summarized by distinguishing the continuous and discrete data. The continuous dynamical quantities/invariants determine the local phase-space trajectory and its radial accessibility, whereas specifies the global homotopy sector of a closed orbit. The screw parameter links these two levels through , and is therefore not an additional conserved quantity. Rather, it converts the global translational holonomy of the defect into a shift of the conserved angular-momentum sector that directly controls the radial dynamics.
The resulting phase-space structure is therefore that of an integrable, locally flat system with globally nontrivial topology. The ambient uniform magnetic field then converts the global momentum shift into finite radial confinement and orientation-selective compensation. The spiral dislocation thus provides a particularly transparent realization in which local geometry, global topology, and electromagnetic dynamics remain sharply distinguishable while jointly determining the observable phase-space structure. The nontrivial winding sectors originate from the global configuration space, whereas their dynamical realization is controlled by the conserved screw-shifted momentum and the magnetic confinement mechanism established in the preceding sections.
The phase-space representation in Figure 4 provides the dynamical realization of the exact radial Hamiltonian in Eq. (74). Hamilton’s equations give

Figure 4. Radial Hamiltonian phase-space dynamics and the associated effective radial potential for a charged particle in the regular exterior of a spiral dislocation. The reduced Hamiltonian is , where and . In panel (a), the color scale represents the exact Hamiltonian , while the arrows denote the normalized Hamiltonian vector field generated by and . The white contour identifies the conserved energy shell , and the superposed curve is the numerical trajectory obtained from the exact radial equations. The point denotes the finite-radius equilibrium, . The marked intersections with are the radial turning points. Panel (b) shows the corresponding effective potential , together with the conserved energy , the equilibrium point, and the two turning radii determined by . The parameters are , , , , , and , yielding , , and . The initial condition is . The radial coordinate is restricted to the regular domain , with the defect axis excluded.
Hence,
for and . The radial flow is therefore directed away from the excluded defect axis at sufficiently small and toward smaller radii at sufficiently large , yielding bounded finite-energy motion between two positive turning points. The fixed point follows from and is precisely the equilibrium radius given in Eq. (65). Its stability follows from the positive curvature established in Eq. (63). Thus, the closed orbit surrounding the fixed point in panel (a) presents the exact bounded radial motion, while its intersections with are the turning points determined by Eq. (58). For the parameters of Figure 4, , so the equilibrium coincides with the finite zero of described by Eqs. (77)–(81). Panel (b) displays the same radial structure through the effective potential: the inverse-square divergence at and the quadratic growth at delimit the accessible radial region, while the conserved level determines the two turning radii. The numerical trajectory in panel (a) therefore lies on the corresponding constant-energy shell and provides a direct phase-space representation of the analytic radial dynamics. No local curvature force is involved in this confinement. The regular spiral-dislocation exterior is locally flat, while the defect dependence of the radial sector is entirely contained in the conserved screw-shifted momentum . The magnetic field enters independently through and supplies the large-radius restoring term. The phase portrait thus separates the global geometric contribution from the electromagnetic confinement mechanism: the screw identification modifies the conserved momentum sector, whereas the ambient magnetic field determines the radial confinement scale. No additional core potential or curvature-induced force is required.
Quantum Mapping and Energy Spectrum
The classical reduction developed in § 3 leaves the radial pair as the only nontrivial dynamical degree of freedom after fixing the conserved axial and azimuthal momenta and . The global screw structure consequently enters the reduced radial dynamics through the single invariant combination . Thus, although and remain separately conserved quantities of the full system, their appearance in the reduced radial interaction is entirely through . The longitudinal kinetic contribution remains separate and is not absorbed into this invariant. The reduced phase space can be quantized directly on with
Accordingly, denotes the reduced one-dimensional radial amplitude and is normalized with respect to the measure . This construction is distinct from a direct quantization of the unreduced three-dimensional system through the Laplace–Beltrami operator. In the latter formulation the radial differential operator and measure follow from the original spatial metric, whereas here the classical cyclic variables have first been eliminated and the resulting canonical pair is subsequently quantized. The spectrum obtained below therefore refers specifically to this reduced quantization prescription.
According to the reduced Hamiltonian obtained in § 3, the corresponding quantum eigenvalue equation is
The radial interaction follows from the decomposition
so that, using , Eq. (100) becomes
The three radial contributions are thereby separated into an inverse-square term, a field-dependent constant shift, and a quadratic confining term. For , introduce the positive magnetic parameter
Since , the radial equation takes the canonical singular-oscillator form [26, 27]
The nonzero magnetic field thus introduces the intrinsic radial scale , while the screw geometry enters the singular part of the radial operator through . To characterize the singular endpoint at , write
The local equation near the origin is
with the two independent behaviors
The endpoint is singular, and its treatment is part of the definition of the quantum Hamiltonian. In the range
both local branches are square-integrable near the origin. Hence square-integrability alone does not select a unique self-adjoint realization of the inverse-square operator. We choose the Friedrichs realization, which eliminates the less regular branch and imposes
For , the branch is not square-integrable at the origin, and the same Friedrichs behavior is selected by the endpoint analysis. All spectral results below refer to this specified self-adjoint realization.
At large radius, the quadratic term in Eq. (104) dominates, giving
The normalizable branch has the Gaussian behavior
Combining the Friedrichs behavior at the origin with the decaying asymptotic behavior at infinity suggests the transformation [26, 27]
Because , the half-line is mapped onto . Substitution of Eq. (112) into Eq. (104) gives
Introducing
the equation assumes the standard Kummer form [26, 27]
The solution compatible with the selected behavior at the origin can therefore be written as [26, 27]
For generic , the large- behavior of contains an exponentially increasing contribution. Since the prefactor in Eq. (116) contributes only , that contribution produces an asymptotic behavior proportional to and is incompatible with square-integrability on the half-line. The increasing contribution is eliminated when the Kummer series terminates, namely when [26, 27]
At these values the confluent hypergeometric function reduces to an associated Laguerre polynomial,
where denotes the Pochhammer symbol [26, 27]. The termination condition therefore converts the singular oscillator into a discrete exactly solvable radial problem. Using Eq. (117) in Eq. (114) yields
Restoring the original energy variable gives
Since
the spectrum in terms of the original conserved quantities becomes
.
This is the discrete spectrum of the reduced radial Hamiltonian for in the Friedrichs realization. The screw parameter does not occur independently in the radial eigenvalue problem; its effect is encoded through the invariant . The longitudinal kinetic contribution remains independent of this reduction. It is useful to introduce
for which
The normalized eigenfunctions can then be written in the compact form
The normalization condition is
With
the normalization integral reduces to the standard associated-Laguerre orthogonality relation. The resulting normalization constant is [26, 27]
Figure 6.
Thus the complete normalized radial states are
The polynomial index is
whereas the radial power is fixed by the selected Friedrichs behavior at the singular endpoint. A dimensionless formulation makes the separation between radial structure, magnetic orientation, and longitudinal energy particularly transparent. Considering
the definition of gives the identity
Hence the dimensional magnetic scale is completely removed from the dimensionless radial coordinate. The dimensionless radial energy is defined by subtracting the independent longitudinal kinetic contribution,
Since
Eq. (122) becomes
Thus the entire dimensionless radial spectrum is determined by the pair . Different sets of dimensional parameters that produce the same value of lead to the same dimensionless radial eigenvalue problem for fixed . Under the same scaling, Eq. (104) becomes
Equivalently,
where
The singular term is controlled by , whereas the constant magnetic term is linear in and changes sign under . The quadratic term supplies confinement at large . Thus the radial Hamiltonian is a singular oscillator with a constant orientation-dependent energy shift. For , the stationary point of the effective potential satisfies
and hence
The corresponding minimum of the effective potential is
This quantity is a property of the classical effective potential appearing in the reduced quantum Hamiltonian and should not be identified with a quantum eigenvalue. The ground-state eigenvalue is instead
For large ,
and consequently
The quantum ground state therefore approaches the minimum of the effective potential with a finite radial zero-point contribution in the large- regime. The radial size can be obtained exactly from the normalized Laguerre states. Using the associated-Laguerre moments gives [26, 27]
Since
one obtains
Therefore,
At fixed , the quantity is independent of the magnitude of the magnetic field, and hence
The dimensional localization scale is consequently set by the effective magnetic length , while the dimensionless radial profile is determined by and the radial quantum number . The exact spectrum also exhibits a field-controlled, equally spaced radial ladder. From Eq. (134),
and therefore
The spacing is independent of , , and at fixed . These quantities instead determine the spectral offset through the singular contribution and the orientation-dependent term. The spatial and spectral dependence on the screw invariant separate exactly. Since
one has
Consequently, for fixed and fixed magnetic-field magnitude, the normalized radial densities satisfy
The dimensionless energies, in contrast, obey
and therefore
The dependence of the radial eigenfunctions on the screw invariant is thus even in , whereas the field-orientation contribution to the energy is odd in . This separation can be displayed directly as
The first term determines the radial eigenfunction through , while the second term shifts the eigenvalue without modifying the radial wave-function. Equal values of therefore define identical dimensionless radial Hamiltonians for fixed . This equivalence concerns the reduced dimensionless radial problem and does not imply equality of the complete physical energies for arbitrary underlying parameter sets. Indeed, the physical spectrum may be written as
Hence two parameter sets may have the same and consequently the same dimensionless radial spectrum while carrying different values of the independent longitudinal contribution . The equality of the reduced radial problems must therefore be distinguished from equality of the full physical energies. The zero-field sector must be treated separately. When , one has , and the magnetic oscillator scale is absent. (100) then reduces to
After subtracting the constant longitudinal contribution, the radial operator is
This operator contains no intrinsic radial length scale. For the Friedrichs realization specified above, the nonnegative inverse-square interaction does not generate a discrete oscillator-like bound-state spectrum; the radial spectrum is continuous above the longitudinal threshold
Accordingly, the discrete levels in Eq. (122) belong exclusively to the nonzero-field problem. The limit must be taken with care because the effective magnetic length diverges and the discrete oscillator scale disappears. Figure 5 provides a direct numerical representation of the reduced quantum problem and its exact spectral and localization properties. Panel (a) shows the singular-oscillator potential generated by the invariant , including the centrifugal barrier for and the confining quadratic term. For the highlighted sector, the minimum occurs at , while the marked energies coincide with the exact levels . Panel (b) displays the corresponding spectral flow, with the radial levels remaining equally spaced by while the -dependent term produces the branch displacement and the reversal under . Panel (c) resolves the ground-state radial probability continuously in the plane; its maximum follows the analytical ridge , demonstrating the displacement of the localized radial profile with the reduced angular invariant. The individual normalized eigenfunctions for are shown in panel (d), where increasing introduces the expected radial nodes. Panel (e) quantifies the corresponding localization scale through the root-mean-square radius, showing its dependence on both radial excitation and . Panel (f) gives the physical energy levels for the two parameter sets used in the numerical construction. Here the radial contribution is deliberately evaluated at the common value , whereas the different values of generate distinct longitudinal offsets . Panels (g) and (h) reconstruct the associated transverse probability densities for the ground and first-excited states at ; their radial symmetry follows directly from the reduced eigenfunctions.

Figure 5. Quantum mapping and spectral structure of a charged particle on the spiral-dislocation geometry in the unit convention , with and . (a) Dimensionless effective potential for ; the curve is highlighted and its minimum at is indicated. The horizontal markers on the highlighted potential correspond to the exact levels . (b) Exact dimensionless spectral flow for and , together with the dashed branch for . (c) Ground-state radial probability density represented as a continuous map in the plane; the white dashed curve gives the analytical maximum . (d) Normalized radial eigenfunctions for at . (e) Exact dimensionless root-mean-square localization length for , where . (f) Physical energies versus the radial quantum number for the two parameter sets and . For the plotted curves, the code evaluates the radial contribution with the common value , while the distinct longitudinal terms produce the vertical separation. (g) Ground-state transverse probability density and (h) first-excited transverse probability density , both evaluated at with and .
Summary and Discussion
The results provide a unified description of how a globally nontrivial but locally Euclidean screw geometry modifies the motion of a charged particle in a uniform magnetic field. The central point is that the dislocation does not introduce local curvature: the three-dimensional embedding is Euclidean away from the defect, while the nontriviality resides in the screw identification
Accordingly, the geometric information relevant to the particle dynamics is carried by the globally induced coupling between the axial and azimuthal momenta rather than by a curvature potential. This distinction is essential for interpreting both the classical and quantum results. The pullback of the uniform ambient magnetic field to the defect geometry provides the corresponding gauge coupling. In the intrinsic coframe, the magnetic potential retains its azimuthal character, while the screw one-form couples the axial and angular sectors. As a result, the two cyclic momenta remain conserved and the radial dynamics depends on them only through
This combination is the natural invariant of the screw geometry: changing the screw parameter does not generate an independent local radial interaction, but instead shifts the effective angular momentum carried by the particle.
It is instructive to place this holonomy explicitly in the context of the published literature on geometric and Berry phases for screw dislocations. The translational holonomy of the defect, , is a purely torsional effect: it enters the particle dynamics not as an external vector potential threading a flux tube, but through the metric itself, exactly as first established for the Landau problem in a screw-dislocation background [5] and for the associated scattering problem in [12]. In those works, and in the related treatment of a screw dislocation carrying an additional magnetic flux [8], the geometric holonomy manifests as an Aharonov–Bohm-type phase accumulated by scattering (continuum) states, together with a genuine Berry phase associated with the adiabatic transport of the electron around the defect; in [8] this geometric contribution can even be tuned to cancel exactly against the phase produced by the internal flux, so that neither scattering nor a Berry phase survives for a specific matching condition. The solid-state analog of the He–McKellar–Wilkens phase obtained for a quasiparticle in a charged screw dislocation immersed in a uniform magnetic field [13] likewise identifies the topological content of the combined dislocation-plus-field configuration through an explicit geometric phase in the scattering amplitude.
The present system realizes the same combined screw-and-gauge holonomy, but in a regime where the particle is not scattered but confined: the uniform magnetic field converts the open radial problem into a discrete spectrum, so the holonomy no longer appears as a phase multiplying an asymptotic wave, but as a shift of the quantum numbers themselves. Concretely, the geometric holonomy identified in [5, 12] enters here through the same mechanism, namely the shift of the conserved angular momentum, while the gauge holonomy of the pulled-back field, Eq. (95), supplies the confining scale rather than an independent Aharonov–Bohm parameter, since no additional flux threads the defect core in the present construction. Their combined effect is therefore not an interference phase but the orientation-dependent spectral asymmetry of Eq. (175),
a spectroscopic, rather than interferometric, fingerprint of the same topological input identified in [5, 8, 12, 13]. In this sense the bound-state problem analyzed here complements the existing Aharonov–Bohm and Berry-phase treatments of the screw dislocation: it shows that, once the magnetic field confines the motion, the geometric holonomy responsible for those phase effects reorganizes the discrete spectrum itself, with the sign of playing the same role that the sign of the enclosed flux plays in the scattering geometric phase.
The classical Hamiltonian therefore reduces to
(163) already exposes the basic physical competition. At small radius,
so that the screw-modified conserved momentum generates an inverse-square barrier. At large radius,
and the magnetic field supplies harmonic confinement. Thus the classical motion is controlled by two distinct mechanisms: the global screw identification determines the short-distance barrier, whereas the external magnetic field fixes the large-distance confining scale. This separation is also visible in the minimum of the dimensionless potential introduced below.
Fixing the two cyclic momenta leaves a single radial degree of freedom. Quantization of this reduced phase space gives a one-dimensional Schrödinger problem on the half-line,
For , the inverse-square oscillator is exactly solvable. Selecting the regular realization at the origin and imposing normalizability at infinity reduces the confluent-hypergeometric solution to an associated-Laguerre polynomial through the termination condition . The resulting spectrum is
Thus the exact quantum solution preserves the same separation already identified classically: the screw geometry enters through , whereas the magnetic field supplies the confining scale. magnetic field supplies the confining scale and the oscillator ladder. This mechanism is the same qualitative effect identified for an electron in a uniform magnetic field in the presence of an isolated screw dislocation [5] and in the presence of several coexisting defects [10], as well as for a continuous distribution of screw dislocations [11], in all of which the infinite Landau degeneracy is lifted by the topological boundary condition; here this lifting is obtained in closed form, together with the explicit localization scale and the spectral-asymmetry relation of Eq. (126).
The universal structure becomes particularly transparent after introducing
The radial equation then takes the parameter-reduced form
with
Hence all local radial problems having the same are dimensionless equivalents, independently of the separate values of , , and . The physical energy, however, still retains the axial kinetic contribution . This distinction between dimensionless radial equivalence and full energetic equivalence is important when interpreting the radial probability map in Figure 5(c).
The dimensionless effective potential,
has, for ,
The position of the minimum depends only on , whereas its energy depends on the relative orientation of the magnetic field and the screw-modified momentum. Panel (a) of Figure 5 displays the resulting family of effective potentials, while panel (b) shows the corresponding spectral flow.
A particularly simple consequence is the different behavior under . Since
is even in , the exact Laguerre densities obey
whereas the energies satisfy
The radial probability density is therefore insensitive to the sign of the screw-modified momentum, whereas the spectrum retains this sign through the magnetic coupling. This separation between the even radial dependence and the sign-sensitive spectral term is a direct signature of the reduced screw–magnetic coupling: the geometric contribution enters the centrifugal sector through , while its magnetic coupling produces the spectral asymmetry. Panel (d) shows the corresponding radial eigenfunctions for the representative sector .
The eigenfunctions also determine the localization scale without approximation,
and hence
The magnetic field thus controls the absolute radial size through , while determines the dimensionless radial structure. Increasing the field compresses the state in physical units without altering its scaled profile. The dependence of the rms localization length on and the radial quantum number is shown explicitly in Figure 5(e), while the transverse ground- and first-excited-state densities are displayed in Figure 5(g) and (h), respectively. The spectrum simultaneously forms an equally spaced ladder,
showing that the screw coupling shifts the ladder but does not alter its spacing.
The physical energies require an additional distinction because the longitudinal kinetic contribution is not contained in the dimensionless radial spectrum. In particular, two configurations can share the same radial invariant while having different values of , and therefore different physical energies through . The comparison shown in Figure 5(f) is constructed with a common radial value in the numerical evaluation, so that the separation between the two plotted energy ladders comes from their distinct longitudinal kinetic terms. This panel therefore concerns the relation between the dimensionless radial spectrum and the full physical energy rather than a spectral flow in .
The zero-field sector must be treated separately. When , the confining term vanishes and
The system then becomes scale invariant on the half-line and no discrete oscillator ladder is generated by the present mechanism. Thus the limit is not merely a smooth removal of a small spectral correction: it removes the confining scale itself and changes the spectral character of the problem. The discrete spectrum Eq. (167) should consequently be understood strictly within the nonzero-field sector. An inverse-square-type interaction combined with a screw dislocation was previously examined in [18]; there the attractive inverse-square term originates from an induced electric dipole coupled to a radial electric field, whereas here it arises purely from the geometric screw-modified momentum , with the confining scale supplied entirely by the external magnetic field rather than by the interaction itself.
The complete picture emerging from Figure 5 is a separation of roles among the geometric defect, the magnetic field, and the longitudinal motion. The screw identification produces the conserved-momentum combination , which determines the local radial problem through . The magnetic field supplies the quadratic confining scale and introduces the orientation-dependent term , while the longitudinal motion contributes the independent kinetic energy to the physical spectrum. Consequently, the dimensionless radial densities depend on , the spectral branches retain the sign of through the magnetic coupling, and the physical energy contains additional information through . These distinct dependencies provide separate spectral and spatial signatures of the screw-dislocation geometry and the applied magnetic field.
More broadly, the analysis demonstrates that nontrivial global geometry can leave a direct quantum imprint even in the absence of local curvature. Here the imprint is not an additional geometric potential but a topologically induced coupling of conserved momenta. The exact solvability then makes it possible to disentangle this global contribution from magnetic confinement and to identify separately its effects on localization, level spacing, and spectral asymmetry. This provides a compact framework for probing global geometric defects through measurable radial and spectroscopic responses.
Credit Authorship Contribution Statement
Claudio Furtado: Conceptualization, Methodology, Formal Analysis, Writing - Original Draft, Investigation, Visualization, Writing - Review and Editing.
Omar Mustafa: Conceptualization, Methodology, Formal Analysis, Writing - Original Draft, Investigation, Visualization, Writing - Review and Editing.
Hassan Hassanabadi: Conceptualization, Methodology, Formal Analysis, Writing - Original Draft, Investigation, Visualization, Writing - Review and Editing.
Abdullah Guvendi: Conceptualization, Methodology, Formal Analysis, Writing - Original Draft, Investigation, Visualization, Writing - Review and Editing.
Data Availability
This manuscript has no associated data.
Conflicts of Interest Statement
No conflict of interest declared by the authors.
Funding
The work by C. Furtado is supported by the CNPq (project PQ Grant 1A No. 311781/2021-7).
References
- [1]M. O. Katanaev and I. V. Volovich, “Theory of defects in solids and three-dimensional gravity,” Annals of Physics, 216, 1–28 (1992).DOI
- [2]M. O. Katanaev, “Geometric theory of defects,” Physics–Uspekhi, 48, 675–701 (2005).
- [3]M. A. H. Vozmediano, M. I. Katsnelson, and F. Guinea, “Gauge fields in graphene,” Physics Reports, 496, 109–148 (2010).DOI
- [4]S. Gurtas Dogan, O. Mustafa, A. Guvendi, H. Hassanabadi, “Optics in spiral dislocation spacetime: Torsion as a geometric waveguide and frequency-filtering mechanism,” European Physical Journal C, 86, 31 (2026).DOI
- [5]C. Furtado, F. Moraes, “Landau levels in the presence of a screw dislocation,” Europhysics Letters, 45, 279 (1999).DOI
- [6]R. A. Puntigam and H. H. Soleng, “Volterra distortions, spinning strings, and cosmic defects,” Classical and Quantum Gravity, 14, 1129–1149 (1997).DOI
- [7]K. C. Valanis and V. P. Panoskaltsis, “Material metric, connectivity and dislocations in continua,” Acta Mechanica, 175, 77–103 (2005).DOI
- [8]C. Furtado, V. B. Bezerra, F. Moraes, “Quantum scattering with a magnetic flux screw dislocation,” Physics Letters A, 289, 160 (2001).DOI
- [9]A. V. D. M. Maia and K. Bakke, “On an electron in an elastic medium with a spiral dislocation,” International Journal of Modern Physics A, 34, 1950153 (2019).DOI
- [10]G. de A. Marques, C. Furtado, V. B. Bezerra, F. Moraes, “Landau levels in the presence of topological defects,” Journal of Physics A: Mathematical and General, 34, 5945 (2001).
- [11]A. L. Silva Netto, C. Furtado, “Elastic Landau levels,” Journal of Physics: Condensed Matter, 20, 125209 (2008).DOI
- [12]C. Furtado, V. B. Bezerra, F. Moraes, “Berry’s quantum phase in media with dislocations,” Europhysics Letters, 52, 1 (2000).DOI
- [13]C. A. de Lima Ribeiro, C. Furtado, F. Moraes, “Solid-state analog for the He-McKellar-Wilkens quantum phase,” Europhysics Letters, 62, 306 (2003).
- [14]C. A. de Lima Ribeiro, A. M. de M. Carvalho, C. Furtado, “Quantum Scattering of an Electric Dipole by a Charged Screw Dislocation,” Progress of Theoretical Physics, 124, 547 (2010).
- [15]C. Furtado, F. Moraes, “Harmonic oscillator interacting with conical singularities,” Journal of Physics A: Mathematical and General, 33, 5513 (2000).DOI
- [16]M. J. Bueno, C. Furtado, K. Bakke, “On the effects of a screw dislocation and a linear potential on the harmonic oscillator,” Physica B, 496, 45 (2016).DOI
- [17]L. Dantas, C. Furtado, A. L. Silva Netto, “Quantum ring in a rotating frame in the presence of a topological defect,” Physics Letters A, 379, 11 (2015).DOI
- [18]K. Bakke, C. Furtado, “On an attractive inverse-square potential in an elastic medium with a screw dislocation,” International Journal of Modern Physics A, 36, 2150066 (2021).DOI
- [19]K. Bakke, C. Furtado, “On the missing magnetic flux and topological effects of a screw dislocation on a charged particle in an inhomogeneous magnetic field,” Annals of Physics, 433, 168598 (2021).DOI
- [20]A. de Padua, F. Parisio-Filho, and F. Moraes, “Geodesics around line defects in elastic solids,” Physics Letters A 238, 153–158 (1998).
- [21]A. Guvendi, O. Mustafa, “Charged Klein-Gordon modes on an Ellis wormhole: magnetic confinement and conditional Heun solvability” arXiv:2609.22860 [gr-qc] (2026).arxiv.org/abs/2609.22860
- [22]A. Guvendi, H. Hassanabadi, S. Gurtas Dogan, O. Mustafa, “Phase-space structure and nonlinear dynamics of a charged particle on a helicoidal manifold under a magnetic field” arXiv:2607.07726 [physics.class-ph] (2026).
- [23]A. Guvendi, H. Hassanabadi, “Geometry-gauge controlled dynamics and localization of a two-particle system on a helicoidal manifold” arXiv:2608.02659 [quant-ph] (2026).
- [24]O. Mustafa, A. Guvendi, “On the Klein–Gordon scalar field oscillators in a spacetime with spiral-like dislocations in external magnetic fields,” European Physical Journal C 85, 34 (2025).
- [25]A. Guvendi, S. Gurtas Dogan, O. Mustafa, H. Hassanabadi, ”Charged particle dynamics in singular spacetimes: hydrogenic mapping and curvature-corrected thermodynamics” International Journal of Geometric Methods in Modern Physics, 24, 265
- [26]J.J. Sakurai, J. Napolitano, “Modern quantum mechanics” (Cambridge University Press 2020)
- [27]K. Gottfried, “Quantum Mechanics: Fundamentals (1st ed.)” (CRC Press, Boca Raton (1974) 528 pages)