betaFeedback

WorksPhysics and Astronomy

Skyrmion-Bubble Bundles in an X-type Sr2Co2Fe28O46 Hexaferrite above Room Temperature

Abstract

Magnetic skyrmions are spin swirls that possess topological nontriviality and are considered particle-like entities. They are distinguished by an integer topological charge Q. The presence of skyrmion bundles provides an opportunity to explore the range of values for Q, which is crucial for the advancement of topological spintronic devices with multi-Q properties. In this study, we present a new material candidate, Sr2Co2Fe28O46 hexaferrite of the X-type, which hosts small dipolar skyrmions at room temperature and above. By exploiting reversed magnetic fields from metastable skyrmion bubbles at zero fields, we can incorporate skyrmion-bubble bundles with different interior skyrmion/bubble numbers, topological charges, and morphologies at room temperature. Our experimental findings are consistently supported by micromagnetic simulations. Our results highlight the versatility of topological spin textures in centrosymmetric uniaxial magnets, thereby paving the way for the development of room-temperature topological spintronic devices with multi-Q characteristics.

main_text

Introduction

Magnetic skyrmions are spin swirls that act like particles and are characterized by a topological charge QQ, which is a quantized integer that remains constant even during continuous deformation of the spin configuration[1, 2]. Skyrmions have great potential as carriers of information for use in memory and processing devices due to their unique topology-related electromagnetic properties[3, 4, 5, 6, 7, 8, 9]. Recent studies have revealed that skyrmion bundles -also called skyrmion bags-, which consist of numerous skyrmions encircled by a closed spin spiral, can extend the range of topological charges from 1 to any integer values[10, 11, 12, 13]. Skyrmion bundles have been first observed in the chiral magnet FeGe at 95 K[10], and this observation has opened up opportunities for developing topological spintronic devices such as multi-bit memory and information multiplexing based on the freedom parameter of QQ.[11, 14, 15]

Applying a reversed magnetic field in the mixed zero-field skyrmion-helix state can control and create skyrmion bundles, and skyrmion bundles have also been then observed in FeGeTe below 200 K[16].

However, practical spintronic devices typically operate at room temperature or higher, which means that materials that can host skyrmions with high curie temperature TcT_c are needed[6, 17, 18]. A recent study tested the use of reversed magnetic fields to create skyrmion bundles in the room-temperature skyrmion material CoZnMn alloys, but only the melting of the skyrmion lattice was observed, with no skyrmion bundles appearing[19]. Dipolar skyrmions - also known as type-I bubbles or skyrmion bubbles - in centrosymmetric uniaxial magnets are topologically equivalent to chiral skyrmions[20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30]. Dipolar skyrmions share the same topology[29, 30], similar topological magnetism[22, 25], and comparable nanometric size at room temperature as chiral skyrmions[21, 26]. Moreover, there is a wide range of uniaxial magnets that can host dipolar skyrmions at room temperature and above[21, 24, 25, 26, 27, 29], which raises the possibility of exploring skyrmion bundles in these uniaxial dipolar magnets at room temperature.

In this study, we report the discovery of skyrmion-bubble bundles in a centrosymmetric uniaxial magnet known as the X-type Sr2_2Co2_2Fe28_{28}O46_{46} (SrCoFeO) hexaferrite[31, 32, 33, 34]. SrCoFeO hexaferrite is a new material candidate that hosts dipolar skyrmions with nanometric-scale sizes (∼\sim150-250 nm) at room temperature. By using reversed magnetic fields, we can create skyrmion-bubble bundles in which various internal skyrmions and bubbles are surrounded by an outer boundary stripe domain. The skyrmion-bubble bundles found in SrCoFeO exhibit distinct characteristics compared to skyrmion bundles found in chiral magnets[10]. These include exceptional stability even at room temperature, a wide range of styles in terms of the arrangement of skyrmions and bubbles, and the ability to manipulate the topological properties through the application of external tilted fields.

Results and Discussions

Magnetic properties of the bulk SrCoFeO single crystal

Hexaferrites are a significant material system with a super-high Curie temperature TcT_c and a wide range of applications, including hard magnets and multiferroic materials[31, 32, 33, 34, 35, 36, 37, 38, 39, 40]. The abundant anisotropy behavior of hexaferrites predicts that they have the potential to host dipolar skyrmions at room temperature. To date, the M-type BaFeScO magnet is the only hexaferrite system known to host dipolar skyrmions[35, 36]. Here, we demonstrate the stabilization of topological spin textures in the X-type SrCoFeO hexaferrite. We prepared bulk SrCoFeO single crystals using the standard flux method[33, 34].

Figure 1a shows the crystal model of the X-type SrCoFeO hexaferrite[33, 34], which possesses a crystal structure belonging to the trigonal system, with a space group of R‾3m\overline{R}3m. The crystal constants for this structure are reported as a=0.59a = 0.59 nm and c=8.41c = 8.41 nm. The cc-cut SrCoFeO crystals exhibit good crystallinity, as revealed by X-ray diffraction, electronic diffraction, and high-resolution transmission electron microscopy (TEM) (Supplemental Figure S1). To analyze the macroscopic magnetic properties of the synthesized SrCoFeO crystals at room temperature and above, we employed the Quantum Design Physical Properties Measurement System (PPMS), as shown in Figure 1. During the magnetic field (BB) cooling process at B=10B = 10 mT (Figure 1b), the magnetization indicates a Curie temperature of approximately 750 K. The magnetizations as a function of the magnetic field (Figure 1c and Supplemental Figure S2) suggest that the magnetization easy axis is along the cc-axis at room temperature and above, which aligns with previous studies[31, 34]. By applying a magnetic field ranging from zero to the saturation field BsatB_{\mathrm{sat}}, the total energy provided by the magnetic field can be expressed as EB=∫0BsatM(B)dBE_B = \int_{0}^{B_{\mathrm{sat}}} M(B)\mathrm{d}B. This energy must surpass both the magnetocrystalline anisotropy energy and the demagnetization energy. The demagnetization energy is primarily influenced by the sample's shape and results from magnetic dipole-dipole interactions. In our macroscopic measurements of magnetizations, we utilize a cube-shaped sample, resulting in comparable demagnetization energies along and perpendicular to the easy magnetization cc-axis[41]. To determine the uniaxial magnetic anisotropy (KuK_u), we calculated the differential values of ∫0BsatM(B)dB\int_{0}^{B_{\mathrm{sat}}} M(B)\mathrm{d}B between along and perpendicular to the cc axis, as marked by the shaded area in Figure 1c[42]. Both the uniaxial magnetic anisotropy and effective anisotropy field (Hk=2Kuμ0MsH_k = \frac{2K_u}{\mu_0 M_s}) initially increase with temperature and then decrease near TcT_c (Figure 1d). The saturation magnetization (MsM_s) is taken as the magnetization at B=1B = 1 T along the cc-axis. The quality factor (η=2Kuμ0Ms2\eta= \frac{2K_u}{\mu_0 M_s^2}), which characterizes the stability of magnetic bubbles in uniaxial magnets, increasing from approximately 0.8 at 300 K to 9 at 725 K (Figure 1e).

Figure 1. a) Crystal structure model of the X-type SrCoFeO hexaferrite. b) Magnetization MM in the field cooling process at B=10B = 10 mT applied along the cc axis. c) Magnetization as a function of the magnetic field at T=300T = 300 K. d) Magnetic anisotropy KuK_u and anisotropy field HkH_k as a function of temperature TT. e) Saturation magnetization MsM_s and quality factor η\eta as a function of temperature TT. MsM_s is taken as the magnetization in the field cooling process at B=1B = 1 T applied along the cc axis.

Observation of dipolar skyrmions in SrCoFeO lamella

Firstly, we examined the magnetic domains in cc-cut SrCoFeO lamella using Lorentz-TEM, which allows visualization of the in-plane magnetizations (mxym_{xy}) [43]. In the as-fabricated 150-nm thick SrCoFeO lamella at zero fields and 294 K (Figure 2a), typical stripe domains emerged, stabilized by the interplay between perpendicular magnetocrystalline anisotropy and dipole-dipole interactions. As an out-of-plane magnetic field is applied, the stripe domains gradually shrink and transform to dipolar skyrmions and bubbles at high fields. Due to the absence of chiral Dzyaloshinskii-Moriya (DM) interaction in the centrosymmetric hexaferrite, coexisting skyrmions with counterclockwise (black under-defocus Fresnel contrasts) and clockwise (white under-defocus Fresnel contrasts) rotations are observed (Figure 1b)[24]. By employing measured magnetic parameters in simulations, simulated dipolar skyrmions and bubbles are found to exhibit comparable sizes and magnetic contrasts (Figure 2c and Supplemental Figure S3) to the experimental observations. Skyrmions display closed domain walls, whereas bubbles featured a pair of Bloch lines within their domain walls (Supplemental Figure S3)[22, 24]. The size of the skyrmions, ranging from ~150-250 nm, is comparable to that observed in chiral CoZnMn (~115-187 nm)[6], Mn-Pt-Pd-Sn (~>135 nm)[44], FeNiPdP (~>200 nm)[45], and magnetic multilayer films at room temperature (Figure 2d)[17]. By varying the magnetic field at different temperatures around room temperature starting from the initial stripe domains, we verified the robust stabilization of dipolar skyrmions near room temperature. Notably, at temperatures below approximately 260 K, only topologically-trivial bubbles are observed in the SrCoFeO magnet due to the temperature-induced spin reorientation effect. This reorientation causes the magnetization easy axis to tilt away from the cc-axis[34]. A previous study has demonstrated the transformation of skyrmions to bubbles when the easy axis is tilted away from the out-of-plane direction[46]. The topologically trivial bubbles become the more stable phases because the magnetization along the easy uniaxial axis is favored by the domain wall magnetizations of the cylinder domains. This preference helps minimize the energy associated with the uniaxial magnetic anisotropy[46]. Our simulation also reveals the stabilization of bubbles in the presence of a titled uniaxial magnetic anisotropy (see Supplemental Figure S4).

Observation of dipolar skyrmions above room temperature

Figure 2. Observation of dipolar skyrmions above room temperature. a) Magnetic evolution from zero-field stripe domains driven by out-of-plane magnetic fields at T=294T = 294 K. Scale bar, 1 μm. b) Representative in-plane magnetization mapping of dipolar skyrmions retrieved from TIE analysis. Scale bar, 100 nm. c) Simulated in-plane spin configurations for the dipolar skyrmions based on measured magnetic parameters at room temperature. d) Diameter of the skyrmion DSkrD_{\mathrm{Skr}} as a function of the magnetic field at T=294T = 294 K. e) Magnetic phase diagram of magnetic domains as a function of temperature and magnetic field. The red and black dots represent the threshold magnetic fields for stripe to skyrmion and skyrmion to FM transformations, respectively, in the field-increasing process. The color represents the in-plane magnetization according to the colorwheel.

We also investigate the magnetic domains in a 150-nm thick lamella where the cc-axis is parallel to the plane, as shown in Supplemental Figures S5 and S6. At temperatures above 260 K, we observe the presence of multi-domains with magnetizations aligned along the two axes of the easy cc-axis. By applying out-of-plane magnetic fields, we observe the displacement of domain walls, leading to a single domain state at high-field strengths. In this case, we do not observe any skyrmions or bubbles due to the absence of perpendicular anisotropies. Nevertheless, micromagnetic simulations successfully replicate the formation and magnetic evolution of these multi-domains under various field strengths. Furthermore, we can also identify the temperature-induced spin reorientation effect in the lamella, where the cc-axis is parallel to the plane. At low temperatures, the magnetizations of the multi-domains deviate from alignment with the cc-axis. These magnetic domain evolutions of the lamella with the cc-axis parallel to the plane are consistent with a previous study[34].

Observation of skyrmion-bubble bundles in SrCoFeO lamella

Although stripe/helix domains are known to be the spontaneous magnetic ground states at zero magnetic fields, skyrmions or stripy-skyrmions can also exist as metastable phases at zero fields[10, 47, 48]. By applying reversed magnetic fields, Q=1Q = 1 skyrmions can persist and be surrounded by a closed spiral, leading to the formation of skyrmion bundles[10]. The observation of skyrmion bundles has opened up possibilities for creating intriguing topological spin textures, including skyrmion-antiskyrmion pairs and Hopfions, by manipulating reversed fields applied to zero-field skyrmions[49, 50]. Due to the intricate coexistence of skyrmions and bubbles in the centrosymmetric SrCoFeO\mathrm{SrCoFeO} magnet, we define the skyrmion bundles as the bundles wherein both the outer boundary and internal constituents are exclusively composed of skyrmions. Similarly, bubble bundles are defined as bundles wherein both the outer boundary and internal constituents solely consist of bubbles. Furthermore, the skyrmion-bubble bundle is defined as the bundle that encompasses main constituents containing both skyrmions and bubbles.

To achieve these bundles, we first applied a negative field to create skyrmions and bubbles. Subsequently, we decreased the field to 0 mT, resulting in the formation of mixed stripes and stripy-skyrmions[47]. Finally, by applying positive magnetic fields, we can assemble various skyrmions and bubbles encircled by a larger closed stripe domain (Figure 3a and Supplemental Figure S7), referred to as skyrmion-bubble bundles in this study. Our simulations (Figure 3b and Supplemental Figure S8) successfully reproduce the formation of skyrmion-bubble bundles observed in experiments, validating the reliability of using reversed magnetic fields to create skyrmion-bubble bundles.

Observation of skyrmion-bubble bundles

Figure 3. Observation of skyrmion-bubble bundles. a) Skyrmion-bubble bundles obtained by reversed magnetic fields. b) Simulated skyrmion-bubble bundles based on measured magnetic parameters at 350 K. c) Diversity of skyrmion-bubble bundles with one interior bubble, which are known as 2π2\pi-vortices. d) Diversity of skyrmion-bubble bundles with two interior bubbles. Temperature T=350T = 350 K. Scale bar, 500 nm. The color represents the in-plane magnetization according to the colorwheel.

Skyrmion-bubble bundles, in contrast to chiral skyrmion bundles, are stabilized by the magnetic dipole-dipole interaction and offer additional degrees of freedom in terms of the distribution of skyrmions and bubbles. Let's consider the simple skyrmion-bubble bundles with 1 internal skyrmion/bubble, known as the $2\pi$-vortex[51, 52], as an example. There are four different styles: a skyrmion encircled by a skyrmion (also called skyrmionium) with Q=0Q = 0[53, 54], a skyrmion encircled by a bubble with Q=1Q = 1, a bubble encircled by a skyrmion with Q=−1Q = -1, and a bubble encircled by a bubble with $Q = 0 ({xref}Figure 3b and {xref}Supplemental Figure S9`).

The diversity of 2π2\pi-vortices, despite having the same size but different topologies and configurations, makes them ideal candidates for applications in multi-state information processing and memory. In contrast, there is only one style 2π2\pi-vortex in chiral magnets[10].

Here, we use the notation S(NS,NB)S(N_S, N_B) and B(NS,NB)B(N_S, N_B) to represent the skyrmion-bubble bundles. The outer boundary stripe domain of S(NS,NB)S(N_S, N_B) does not contain Bloch lines, while that of B(NS,NB)B(N_S, N_B) includes Bloch lines. The emergence of Bloch lines contributes Q=0Q = 0 as that of the magnetic bubbles (Supplemental Figure S3). The counts of internal skyrmions and bubbles are represented by NSN_S and NBN_B, respectively, and the corresponding topological charges are given by Q=NS−1Q = N_S - 1 and Q=NSQ = N_S for S(NS,NB)S(N_S, N_B) and B(NS,NB)B(N_S, N_B) skyrmion-bubble bundles, respectively. Considering a skyrmion-bubble bundle consisting of NSN_S skyrmions and NBN_B bubbles, with N=NS+NBN = N_S + N_B, there exist a total of 2(N+1)2(N + 1) distributions of skyrmions and bubbles with topological charges QQ varying from −1-1 to NN. Taking the example of skyrmion-bubble bundles with N=2N = 2, we can observe 6 distinct types of bundles: S(NS=2,NB=0)S(N_S = 2, N_B = 0) with Q=1Q = 1, S(NS=1,NB=1)S(N_S = 1, N_B = 1) with Q=0Q = 0, S(NS=0,NB=2)S(N_S = 0, N_B = 2) with Q=−1Q = -1, B(NS=2,NB=0)B(N_S = 2, N_B = 0) with Q=2Q = 2, B(NS=1,NB=1)B(N_S = 1, N_B = 1) with Q=1Q = 1, and B(NS=0,NB=2)B(N_S = 0, N_B = 2) with Q=0Q = 0. Our experiments involved the repetition of the process of reversing fields, which enable us to obtain skyrmion-bubble bundles exhibiting a wide range of diversity (See Figure 3 and Supplemental Figure S10).

Topological magnetic transformations of skyrmion-bubble bundles

Since coexisting skyrmions and bubbles are typically obtained under negative fields, we usually obtain skyrmion-bubble bundles with Q=NSQ = N_{\mathrm{S}} when reversing the magnetic fields, denoted by B(NS,NB)B(N_{\mathrm{S}}, N_{\mathrm{B}}). The Bloch lines, which lie within the domain walls of bubbles, move with tilted in-plane magnetic fields (Supplemental Figure S11). During their rapid motion induced by a wobbler operation, wherein the tilted angle is increased gradually from 0∘0^\circ to 15∘15^\circ, then to −15∘-15^\circ and finally back to 0∘0^\circ, Bloch lines become unstable and can annihilate (Supplemental Figure S8)[25, 55]. Therefore, the wobbler operation can be considered a viable method for achieving topological magnetic transformation from a skyrmion-bubble bundle B(NS,NB)B(N_{\mathrm{S}}, N_{\mathrm{B}}) to a dipolar skyrmion bundle S(NS=N,NB=0)S(N_{\mathrm{S}} = N, N_{\mathrm{B}} = 0). Figure 4 shows an example of such a transformation, depicting the conversion of a B(NS=3,NB=3)B(N_{\mathrm{S}} = 3, N_{\mathrm{B}} = 3) skyrmion-bubble bundle to a S(NS=6,NB=0)S(N_{\mathrm{S}} = 6, N_{\mathrm{B}} = 0) skyrmion bundle. Similar to chiral skyrmion bundles, the topological charge of a dipolar skyrmion bundle S(NS=N,NB=0)S(N_{\mathrm{S}} = N, N_{\mathrm{B}} = 0) is equal to Q=N−1Q = N - 1, where NN represents the internal skyrmion number (Supplemental Figure S12). The outer closure stripe domain contributes to the negative integer charge. In principle, the internal count of skyrmions can be any integer N≥1N \ge1. Thus, QQ of skyrmion bundles can be any integer Q≥0Q \ge0 at positive magnetic fields. It should be noted that the magnetizations between the internal skyrmion and the outer boundary have orientations opposite to that of the magnetic field. Therefore, the internal skyrmions/bubbles of bundles always maintain tight contact to minimize the Zeeman energy, even when initially arranged in a loosely packed configuration (Supplemental Figure S12).

Topological transformation from skyrmion-bubble bundles to skyrmion bundles

Figure 4. Topological transformation from skyrmion-bubble bundles to skyrmion bundles with an increased QQ by a wobbler operation at a fixed B=140B = 140 mT. Temperature T=350T = 350 K. The color represents the in-plane magnetization according to the colorwheel.

Once the high-QQ skyrmion bundles stabilize, increasing the magnetic fields will reduce and eventually eliminate skyrmions, leading to a decrease in topological charges QQ, as shown in Figure 5. For instance, a bundle with Q=6Q = 6 converts to a bundle with Q=3Q = 3 at B=151B = 151 mT, Q=2Q = 2 at B=155B = 155 mT, Q=1Q = 1 at B=156B = 156 mT and Q=0Q = 0 (i.e. skyrmionium) at B=162B = 162 mT. Finally, at B=164B = 164 mT, a skyrmion with Q=−1Q = -1 is obtained.

Figure 5. Figure 5 Decrease of interior skyrmion number and topological charge QQ in the field-increasing operation. (a) Magnetic evolution from a Q=6Q = 6 skyrmion bundle driving by an out-of-plane magnetic field. (b) Topological charge QQ as a function of the magnetic field. Scale bar, 500 nm. Temperature T=350T = 350 K. The color represents the in-plane magnetization according to the colorwheel.

We thus can apply the wobbler (Figure 4) and BB-increasing (Figure 5) operations to obtain high-QQ and low-QQ skyrmion bundles, respectively. By combining these operations with reversed magnetic fields, we can obtain dipolar skyrmion bundles with various topological charges QQ, as shown in Figure 6 and Supplemental Figure S13. Moreover, it is worth noting that skyrmion bundles can also stabilize at zero magnetic fields, albeit with distorted shapes (Supplemental Figure S14). As an example, skyrmionium can stabilize across a broad field-temperature range, and at high fields, the skyrmionium transforms to a skyrmion (Figure 6c and Supplemental Figure S14).

Diversity of topological charges for dipolar skyrmion bundles and magnetic phase diagram

Figure 6. Figure 6 Diversity of topological charges QQ for dipolar skyrmion bundles. B=140B = 140 mT. a) Skyrmion bundles with Q=0,1,2,3Q = 0, 1, 2, 3. b) Skyrmion bundles with Q=11Q = 11. c) Magnetic phase diagram for the Q=0Q = 0 bundle, i.e. the skyrmionium, as a function of magnetic field and temperature. Scale bar, 500 nm. The color represents the in-plane magnetization according to the colorwheel.

Conclusions

In summary, we have presented a new material - the X-type SrCoFeO\mathrm{SrCoFeO} hexaferrite - that hosts nanometric-scale (∼150\sim150-250 nm) dipolar skyrmions and topological skyrmion-bubble bundles at room temperature and higher. By applying reversed magnetic fields, we propose a practical approach to achieve skyrmion-bubble bundles with multi-QQ properties. This method is applicable to a wide range of traditional uniaxial magnets at room temperature[21, 24, 25, 26, 27, 29].

We demonstrate the viability of topological transformations of skyrmion-bubble bundles using the wobbler and BB-increasing techniques, which allow for increased and decreased QQ, respectively. Our results highlight the diversity of topological spin textures in centrosymmetric uniaxial magnets, with excellent thermal stability at room temperature. This discovery could promote topological spintronic device applications based on the freedom of topological charges QQ. Furthermore, the hexaferrite family is significant because it hosts multiferroic properties[38, 39], suggesting the potential for electrically-controlled topological spin textures in these materials.

Methods

Preparation, structure characterization, and macroscopic magnetic measurement of bulk X-type Sr2Fe30O46\mathrm{Sr_2Fe_{30}O_{46}} hexaferrite crystal: The hexaferrite crystals of Sr2CoxFe30−xO46\mathrm{Sr_2Co_xFe_{30-x}O_{46}} (x≈2x \approx2) were grown by the flux method[34]. The powders of SrCO3\mathrm{SrCO_3}, Fe3O4\mathrm{Fe_3O_4}, Fe2O3\mathrm{Fe_2O_3}, and Na2CO3\mathrm{Na_2CO_3} were mixed and grounded thoroughly. The mixtures of raw materials were put into a platinum crucible and heated to 1593 K at a rate of 50 K/h and kept at this temperature for 48 h, then they were gradually cooled to 1313 K at a rate of 0.5 K/h, and finally cooled to room temperature at 150 K/h. All the procedures were performed in the air atmosphere. The synthesized single crystals with 1-2 centimeters in size and shiny surfaces were got by dissolving the flux in the hot nitric acid for several days.

The crystalline quality and crystallographic orientations of the shiny surfaces of grown crystals were confirmed by the Rigaku-TTR3 X-ray diffractometer using high-intensity graphite monochromatized Cu-Kα\mathrm{K}\alpha radiation. High-resolution transmission electron microscopy images and electron diffraction patterns of the shiny surfaces of grown crystals were all acquired by TEM (F200X, Talos) operated at 200 kV. The magnetic measurements were performed on a piece of cube-shaped single crystal (∼\sim4.7 mg) in Quantum Design Physical Properties Measurement System (PPMS) with Vibrating Sample Magnetometer Measurement (VSM) within the temperature range of 300–800 K. The magnetic fields were applied perpendicular to and parallel to the cc-axis of the crystal sample, respectively.

Fabrication of SrCoFeO lamellas: The 150-nm thick SrCoFeO nanostructured lamellas were fabricated from a bulk single crystal using a standard lift-out method, with a focused ion beam and scanning electron microscopy dual beam system (Helios Nanolab 600i, FEI)[20, 51].

TEM measurements: We used in-situ Fresnel imaging in Lorentz-TEM (Talos F200X, FEI) with an acceleration voltage of 200 kV to investigate magnetic domains in the SrCoFeO lamellas. The TEM holder (model 636.6, Gatan) can support the varying temperature measurements.

Micromagnetic simulations: The zero-temperature micromagnetic simulations for magnetic domains in 150-nm thick lamellas were performed using MuMax3.[56] We consider in the Hamiltonian exchange interaction (AA) energy, uniaxial magnetic anisotropy (KuK_u) energy, Zeeman energy, and dipole-dipole interaction energy.[56] Simulated magnetic parameters are set based on the material Sr2Co2Fe28O46\mathrm{Sr_2Co_2Fe_{28}O_{46}} measured at 350 K (Ku=95.4K_u = 95.4 kJ⋅\cdotm−3^{-3}, saturated magnetization Ms=366.6M_s = 366.6 kA⋅\cdotm−1^{-1}) or at 300 K (Ku=81.5K_u = 81.5 kJ⋅\cdotm−3^{-3}, saturated magnetization Ms=403.1M_s = 403.1 kA⋅\cdotm−1^{-1}). We set exchange constant A=8.25A = 8.25 pJ⋅\cdotm−1^{-1}. The cell size was set at 3 ×\times 3 ×\times 3 nm3^3.

Supporting Information

Supporting Information is available from the Wiley Online Library or from the author.

Acknowledgments

This work was supported by the National Key R&D Program of China, Grant No. 2022YFA1403603; the Natural Science Foundation of China, Grants No. 12174396, 12104123, 1197402, and 12241406; the National Natural Science Funds for Distinguished Young Scholar, Grants No. 52325105; Natural Science Project of Colleges and Universities in Anhui Province, Grant No. 2022AH030011; the Strategic Priority Research Program of Chinese Academy of Sciences, Grant No. XDB33030100; CAS Project for Young Scientists in Basic Research, Grant No. YSBR-084; the Research Fund of Hefei Normal University, Grant No. HXXM2022122; and the Equipment Development Project of Chinese Academy of Sciences, Grant No. YJKYYQ20180012.

Author Contributions

J.T., Y.W., and H.D. supervised the project and conceived the experiments. Y.W. synthesized the Sr-Co-Fe-O bulk single crystals and measured their crystals and macroscopic magnetism. J.T. performed the microdevice fabrication and TEM with the help of Y.W. and J.J.. J.T. performed the simulations. J.T., Y.W., and H.D. wrote the manuscript with input from all authors. All authors discussed the results and contributed to the manuscript.

Conflict of Interest:

The authors declare no competing financial interest.

Received: ((will be filled in by the editorial staff))

Revised: ((will be filled in by the editorial staff))

Published online: ((will be filled in by the editorial staff))

Supporting Information

Figure S1. a) X-ray diffraction of a c-cut SrCoFeO single crystal. Inset shows the bulk crystal. b) Electron diffraction of a c-cut SrCoFeO lamella. c) High-resolution imaging of a c-cut SrCoFeO lamella.

Figure S2. Magnetization along the cc axis and abab plane above room temperature.

Simulated spin configurations and corresponding defocused Fresnel contrasts of dipolar skyrmions and bubble

Figure S3. Simulated spin configurations and corresponding defocused Fresnel contrasts of dipolar skyrmions a) with Q=−1Q=-1 and bubble b) with Q=0Q=0. The red wireframes in (b) indicate the locations of Bloch lines. The color represents the magnetization according to the colorwheel.

Figure S4. Simulated magnetic configuration a) and corresponding under-defocused Fresnel image b) of a bubble in the presence of a tilted uniaxial anisotropy at B=225B=225 mT. The uniaxial anisotropy is 14.5° away from the out-of-plane direction. The in-plane orientation of uniaxial anisotropy is denoted by the arrow in (a). (c) Experimental under-defocused Fresnel image of a bubble at 200 K and at B=250B=250 mT.

Figure S5. Magnetic domains in a 150-nm thick lamella where the cc-axis is parallel to the plane. a) Magnetic field-driven domain evolution at 294 K. b) Magnetic field-driven domain evolution at 350 K. Simulated under-defocused Fresnel images c) and spin configurations d) during the magnetic field-driven domain evolution. The orientation of the cc-axis is denoted by a red arrow in (a). Noted the magnetic field is applied almost out-of-plane but with a slight 2.86° tilt toward the in-plane. The in-plane field component is denoted by the arrow in (d). When the field is applied, the region whose magnetization is parallel to the in-plane field component B∥B_{\parallel} expands, resulting in the displacement of domain walls.

Figure S6. Magnetic domains in a 150-nm thick lamella where the cc-axis is parallel to the plane. a) Temperature-driven domain evolution at B=0B = 0 mT. b) Magnetic field-driven domain evolution at 94 K.

Figure S7. a) Formation of Skyrmion-bubble bundles through the reversed fields. b) Retrieved in-plane magnetization mapping of a skyrmion-bubble bundle in the marked region of (a). Temperature T=294T = 294 K. The color represents the in-plane magnetization according to the colorwheel.

Simulated magnetic evolution from skyrmion bubbles at negative fields to skyrmion-bubble bundles at positive fields

Figure S8. Simulated magnetic evolution from skyrmion bubbles at negative fields to skyrmion-bubble bundles at positive fields. a) Simulated spin configurations. b) Corresponding simulated defocused Fresnel contrasts. The color represents the magnetization according to the colorwheel.

Simulated magnetization, in-plane magnetization, and Fresnel images of four types of $2\pi$-vortices

Figure S9. Supplemental Figure S9. Simulated magnetization a), in-plane magnetization b), and Fresnel images c) of 4 types of 2π2\pi-vortices. d) corresponding experimental Fresnel images c) of 4 types of 2π2\pi-vortices. Temperature T=350T = 350 K. The color in (a) represents the magnetization based on the colorwheel in (a). The color in (b) represents the in-plane magnetization based on the colorwheel in (b).

Defocused Fresnel images of skyrmion-bubble bundles

Figure S10. Defocused Fresnel images of skyrmion-bubble bundles with a diversity of topological charges QQ and configurations. Temperature T=350T = 350 K. Scale bar, 500 nm. Panel labels: B(NS=14,NB=7)B(N_{\mathrm{S}} = 14, N_{\mathrm{B}} = 7), Q=14Q = 14; B(NS=10,NB=7)B(N_{\mathrm{S}} = 10, N_{\mathrm{B}} = 7), Q=10Q = 10; B(NS=5,NB=17)B(N_{\mathrm{S}} = 5, N_{\mathrm{B}} = 17), Q=5Q = 5; B(NS=9,NB=12)B(N_{\mathrm{S}} = 9, N_{\mathrm{B}} = 12), Q=9Q = 9; B(NS=2,NB=1)B(N_{\mathrm{S}} = 2, N_{\mathrm{B}} = 1), Q=2Q = 2; B(NS=2,NB=1)B(N_{\mathrm{S}} = 2, N_{\mathrm{B}} = 1), Q=2Q = 2; B(NS=1,NB=1)B(N_{\mathrm{S}} = 1, N_{\mathrm{B}} = 1), Q=1Q = 1; S(NS=1,NB=1)S(N_{\mathrm{S}} = 1, N_{\mathrm{B}} = 1), Q=0Q = 0.

Simulated topological magnetic transformation from a $(S,N_S,N_B)$ skyrmion-bubble bundle to a $(S,N_S,N_B)$ skyrmion bundle through the wobbler operation

Figure S11. Simulated topological magnetic transformation from a B(NS=1,NB=0)B(N_S = 1, N_B = 0) skyrmion-bubble bundle to a S(NS=1,NB=0)S(N_S = 1, N_B = 0) skyrmion bundle through the wobbler operation. The arrow denotes the orientation of in-plane fields. Bloch lines move and could annihilate when modulating in-plane magnetic fields.

Figure S12. a) Initial Q=2Q = 2 dipolar skyrmion bundle with internal loosely contacted skyrmions. The magnetic field is applied opposite to magnetizations between the internal skyrmions and outer boundary. b) Simulated equilibrium spin configuration of a dipolar skyrmion bundle relaxed from the initial non-equilibrium state in (a) to minimize Zeeman energy. The outer closed stripe domain is topologically equivariant to a skyrmion with Q=−1Q = -1, whereas the internal 3 skyrmions contribute Q=3Q = 3.

Defocused Fresnel images of dipolar skyrmion bundles with a diversity of topological charges

Figure S13. Defocused Fresnel images of dipolar skyrmion bundles with a diversity of topological charges QQ. Defocused distance, −1000-1000 nm. Temperature T=325T = 325 K. Scale bar, 500 nm.

Figure S14. Magnetic evolution from a distorted skyrmionium in the field-increasing process at temperature T=360T = 360 K.

References

  1. [1]A. Bogdanov and A. Hubert, J. Magn. Magn. Mater. 1994, 138, 255.
  2. [2]S. Mühlbauer, B. Binz, F. Jonietz, C. Pfleiderer, A. Rosch, A. Neubauer, R. Georgii, and P. Böni, Science 2009, 323, 915.
  3. [3]N. Nagaosa and Y. Tokura, Nat. Nanotechnol. 2013, 8, 899.
  4. [4]B. Göbel, I. Mertig, and O. A. Tretiakov, Phys. Rep. 2021, 895, 1.
  5. [5]C. H. Marrows and K. Zeissler, Appl. Phys. Lett. 2021, 119, 250502.
  6. [6]Y. Tokura and N. Kanazawa, Chem. Rev. 2021, 121, 2857.
  7. [7]K. Everschor-Sitte, J. Masell, R. M. Reeve, and M. Kläui, J. Appl. Phys. 2018, 124, 240901.
  8. [8]H. B. Christian, C. Vincent, E. Hubert, E.-S. Karin, F. Albert, G. Markus, M. Tainping, M. Sergiy, M. Theodore, V. M. Maxim, N. Naoto, P. Stuart, P. Christian, R. Nicolas, R. Achim, T. Yasujiro, T. Yoshinori, B. Kirsten von, and Z. Jiadong, J. Phys. D: Appl. Phys. 2020, 53, 363001.
  9. [9]G. Finocchio, F. Büttner, R. Tomasello, M. Carpentieri, and M. Kläui, J. Phys. D: Appl. Phys. 2016, 49, 423001.
  10. [10]J. Tang, Y. Wu, W. Wang, L. Kong, B. Lv, W. Wei, J. Zang, M. Tian, and H. Du, Nat. Nanotechnol. 2021, 16, 1086.
  11. [11]D. Foster, C. Kind, P. J. Ackerman, J.-S. B. Tai, M. R. Dennis, and I. I. Smalyukh, Nat. Phys. 2019, 15, 655.
  12. [12]Z. Zeng, C. Zhang, C. Jin, J. Wang, C. Song, Y. Ma, Q. Liu, and J. Wang, Appl. Phys. Lett. 2020, 117, 172404.
  13. [13]F. N. Rybakov and N. S. Kiselev, Phys. Rev. B 2019, 99, 064437.
  14. [14]R. Chen, Y. Li, V. F. Pavlidis, and C. Moutafis, Physical Review Research 2020, 2, 043312.
  15. [15]C. Kind and D. Foster, Phys. Rev. B 2021, 103, L100413.
  16. [16]L. Powalla, M. T. Birch, K. Litzius, S. Wintz, F. S. Yasin, L. A. Turnbull, F. Schulz, D. A. Mayoh, G. Balakrishnan, M. Weigand, X. Yu, K. Kern, G. Schutz, and M. Burghard, Adv. Mater. 2023, 35, 2208930.
  17. [17]S. Woo, K. Litzius, B. Kruger, M.-Y. Im, L. Caretta, K. Richter, M. Mann, A. Krone, R. M. Reeve, M. Weigand, P. Agrawal, I. Lemesh, M.-A. Mawass, P. Fischer, M. Klaui, and G. S. D. Beach, Nat. Mater. 2016, 15, 501.
  18. [18]Y. Tokunaga, X. Z. Yu, J. S. White, H. M. Ronnow, D. Morikawa, Y. Taguchi, and Y. Tokura, Nature communications 2015, 6, 7638.
  19. [19]V. Ukleev, D. Morikawa, K. Karube, A. Kikkawa, K. Shibata, Y. Taguchi, Y. Tokura, T. h. Arima, and J. S. White, Advanced Quantum Technologies 2022, 5, 2200066.
  20. [20]J. Tang, J. Jiang, N. Wang, Y. Wu, Y. Wang, J. Li, Y. Soh, Y. Xiong, L. Kong, S. Wang, M. Tian, and H. Du, Adv. Funct. Mater. 2023, 33, 2207770.
  21. [21]S. A. Montoya, S. Couture, J. J. Chess, J. C. T. Lee, N. Kent, D. Henze, S. K. Sinha, M. Y. Im, S. D. Kevan, P. Fischer, B. J. McMorran, V. Lomakin, S. Roy, and E. E. Fullerton, Phys. Rev. B 2017, 95, 024415.
  22. [22]M. G. Han, J. A. Garlow, Y. Liu, H. Zhang, J. Li, D. DiMarzio, M. W. Knight, C. Petrovic, D. Jariwala, and Y. Zhu, Nano Lett. 2019, 19, 7859.
  23. [23]M. Heigl, S. Koraltan, M. Vanatka, R. Kraft, C. Abert, C. Vogler, A. Semisalova, P. Che, A. Ullrich, T. Schmidt, J. Hintermayr, D. Grundler, M. Farle, M. Urbanek, D. Suess, and M. Albrecht, Nature communications 2021, 12, 2611.
  24. [24]W. Wei, J. Tang, Y. Wu, Y. Wang, J. Jiang, J. Li, Y. Soh, Y. Xiong, M. Tian, and H. Du, Adv. Mater. 2021, 33, 2101610.
  25. [25]D. Chakrabarty, S. Jamaluddin, S. K. Manna, and A. K. Nayak, Communications Physics 2022, 5, 189.
  26. [26]Y. He, T. Helm, I. Soldatov, S. Schneider, D. Pohl, A. K. Srivastava, A. K. Sharma, J. Kroder, W. Schnelle, R. Schaefer, B. Rellinghaus, G. H. Fecher, S. S. P. Parkin, and C. Felser, Phys. Rev. B 2022, 105, 064426.
  27. [27]M. Schmitt, T. Denneulin, A. Kovács, T. G. Saunderson, P. Rüßmann, A. Shahee, T. Scholz, A. H. Tavabi, M. Gradhan, P. Mavropoulos, B. V. Lotsch, R. E. Dunin-Borkowski, Y. Mokrousov, S. Blügel, and M. Kläui, Communications Physics 2022, 5, 254.
  28. [28]J. Tang, Y. Wu, L. Kong, W. Wang, Y. Chen, Y. Wang, Y. Soh, Y. Xiong, M. Tian, and H. Du, Natl. Sci. Rev. 2021, 8, nwaa200.
  29. [29]J. C. Loudon, A. C. Twitchett-Harrison, D. Cortés-Ortuño, M. T. Birch, L. A. Turnbull, A. Štefančič, F. Y. Ogrin, E. O. Burgos-Parra, N. Bukin, A. Laurenson, H. Popescu, M. Beg, O. Hovorka, H. Fangohr, P. A. Midgley, G. Balakrishnan, and P. D. Hatton, Adv. Mater. 2019, 31, 1806598.
  30. [30]S. G. Je, H. S. Han, S. K. Kim, S. A. Montoya, W. Chao, I. S. Hong, E. E. Fullerton, K. S. Lee, K. J. Lee, M. Y. Im, and J. I. Hong, ACS Nano 2020, 14, 3251.
  31. [31]M. Wu, X. Zhou, M. Croft, S. Ehrlich, S. Khalid, W. Wen, S. H. Lapidus, X. Xu, M. R. Li, Z. Liu, and S. W. Cheong, Inorg. Chem. 2020, 59, 6755.
  32. [32]M. Komabuchi, D. Urushihara, Y. Kimata, M. Okabe, T. Asaka, K. Fukuda, K. Nakano, and K. Yamamoto, J. Magn. Magn. Mater. 2020, 498, 166115.
  33. [33]M. Komabuchi, D. Urushihara, T. Asaka, K. Fukuda, T. Ohbara, K. Munakata, and Y. Ishikawa, J. Phys. Soc. Jpn. 2020, 89, 034601.
  34. [34]M. Komabuchi, D. Urushihara, Y. Kimata, M. Okabe, T. Asaka, and K. Fukuda, Phys. Rev. B 2019, 100, 094406.
  35. [35]X. Yu, M. Mostovoy, Y. Tokunaga, W. Zhang, K. Kimoto, Y. Matsui, Y. Kaneko, N. Nagaosa, and Y. Tokura, Proceedings of the National Academy of Sciences 2012, 109, 8856.
  36. [36]H. Nakajima, A. Kotani, K. Harada, Y. Ishii, and S. Mori, Phys. Rev. B 2016, 94, 224427.
  37. [37]R. Jotania, AIP Conf Proc 2014, 1621, 596.
  38. [38]R. Tang, H. Zhou, W. You, and H. Yang, Appl. Phys. Lett. 2016, 109, 082903.
  39. [39]K. Zhai, D.-S. Shang, Y.-S. Chai, G. Li, J.-W. Cai, B.-G. Shen, and Y. Sun, Adv. Funct. Mater. 2018, 28, 1705771.
  40. [40]C. de Julian Fernandez, C. Sangregorio, J. de la Figuera, B. Belec, D. Makovec, and A. Quesada, J. Phys. D: Appl. Phys. 2020, 54, 153001.
  41. [41]A. Aharoni, J. Appl. Phys. 1998, 83, 3432.
  42. [42]B. Hu, W. He, J. Ye, J. Tang, S. A. Syed, X.-Q. Zhang, and Z.-H. Cheng, Chin. Phys. B. 2015, 24, 017502.
  43. [43]J. Tang, L. Kong, W. Wang, H. Du, and M. Tian, Chin. Phys. B. 2019, 28, 087503.
  44. [44]A. K. Nayak, V. Kumar, T. Ma, P. Werner, E. Pippel, R. Sahoo, F. Damay, U. K. Rossler, C. Felser, and S. S. P. Parkin, Nature 2017, 548, 561.
  45. [45]K. Karube, L. Peng, J. Masell, X. Yu, F. Kagawa, Y. Tokura, and Y. Taguchi, Nat. Mater. 2021, 20, 335.
  46. [46]Y. Chen, B. Lv, Y. Wu, Q. Hu, J. Li, Y. Wang, Y. Xiong, J. Gao, J. Tang, M. Tian, and H. Du, Phys. Rev. B 2021, 103, 214435.
  47. [47]X. R. Wang, X. C. Hu, and H. T. Wu, Communications Physics 2021, 4, 142.
  48. [48]X. Yu, D. Morikawa, T. Yokouchi, K. Shibata, N. Kanazawa, F. Kagawa, T.-h. Arima, and Y. Tokura, Nat. Phys. 2018, 14, 832.
  49. [49]F. Zheng, N. S. Kiselev, L. Yang, V. M. Kuchkin, F. N. Rybakov, S. Blügel, and R. E. Dunin-Borkowski, Nat. Phys. 2022, 18, 863.
  50. [50]X. Yu, Y. Liu, K. V. Iakoubovskii, K. Nakajima, N. Kanazawa, N. Nagaosa, and Y. Tokura, Adv. Mater. 2023, 35, 2210646.
  51. [51]J. Tang, L. Kong, Y. Wu, W. Wang, Y. Chen, Y. Wang, J. Li, Y. Soh, Y. Xiong, M. Tian, and H. Du, ACS Nano 2020, 14, 10986.
  52. [52]H. Du, W. Ning, M. Tian, and Y. Zhang, EPL (Europhysics Letters) 2013, 101, 37001.
  53. [53]X. Zhang, J. Xia, Y. Zhou, D. Wang, X. Liu, W. Zhao, and M. Ezawa, Phys. Rev. B 2016, 94, 094420.
  54. [54]S. Zhang, F. Kronast, G. van der Laan, and T. Hesjedal, Nano Lett. 2018, 18, 1057.
  55. [55]Y. Wu, J. Tang, B. Lyu, L. Kong, Y. Wang, J. Li, Y. Soh, Y. Xiong, M. Tian, and H. Du, Appl. Phys. Lett. 2021, 119, 012402.
  56. [56]A. Vansteenkiste, J. Leliaert, M. Dvornik, M. Hels en, F. Garcia-Sanchez, and B. Van Waeyenberge, AIP Advances 2014, 4, 107133.

Paper details

vlnc:W_34znb2x9
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents