betaFeedback

WorksMathematics

Asymptotic models for viscoelastic one-dimensional blood flow

Abstract

We derive a unidirectional asymptotic model for one-dimensional blood flow in viscoelastic arteries. We prove local well-posedness of strong solutions in Sobolev spaces for general parameters and mean-zero periodic data. In the purely elastic BBM regime we further establish global existence and exponential decay for sufficiently small initial data. We also present a numerical study of the reduced model, including comparisons across different viscoelastic and amplitude regimes, and discuss the observed dynamics in connection with the continuation criterion.

Introduction

The modeling of the human arterial system dates back to the works of Euler, who formulated the partial differential equations that describe the conservation of mass and momentum in inviscid flow. Early mathematical descriptions of arterial blood flow date back to Euler, while Young first identified its wave-like nature and derived an expression for the propagation velocity by analogy with wave motion in elastic tubes [5, 11].

The one-dimensional modeling of blood flow has been established as a valuable technique for studying circulatory dynamics in arteries and veins. This approach simplifies the vascular system into a single dimension, allowing for the analysis of blood flow along arterial or venous segments with adequate accuracy and reasonable computational cost. Essentially, these models describe the relationship between pressure, flow, and the cross-sectional area of blood vessels over time and distance. More precisely, the cross-sectional area of the vessel A(x,t)A(x,t), the flow rate Q(x,t)Q(x,t) and the average internal pressure p(x,t)p(x,t) over the cross section satisfy the conservation of mass and momentum balance equations. For mathematical convenience, and in order to avoid boundary effects at the level of the reduced asymptotic model, we work throughout on the periodic domain T=(R/2πZ)\mathbb{T} = (\mathbb{R}/2\pi\mathbb{Z}). Thus,

At+Qx=0,x∈T,t>0,(1)A_t + Q_x = 0,\qquad x \in\mathbb{T}, t > 0, \tag*{(1)}
Qt+α(Q2A)x=−Aρpx+fρ,x∈T,t>0.(2)Q_t + \alpha\left(\frac{Q^2}{A}\right)_x = -\frac{A}{\rho}p_x + \frac{f}{\rho},\qquad x \in\mathbb{T}, t > 0. \tag*{(2)}

Here ρ\rho is the fluid density assumed to be constant, α\alpha denotes a Coriolis coefficient and ff is a friction term, cf. [26]. To close the system, we must specify a constitutive law between the internal pressure pp and the cross-sectional area of the vessel AA. In this work, we will consider the so called Kelvin-Voigt relation where the pressure is given by

p(A,x)=pext+βA0(x)(A(x,t)−A0(x))+νA0(x)(A(x,t))t,(3)p(A,x) = p_{\mathrm{ext}} + \frac{\beta}{A_0(x)}\left(\sqrt{A(x,t)}-\sqrt{A_0(x)}\right) + \frac{\nu}{A_0(x)}\left(\sqrt{A(x,t)}\right)_t, \tag*{(3)}

where

β(x)=πh0(x)E(x)1−σ2.(4)\beta(x) = \frac{\sqrt{\pi}h_0(x)E(x)}{1-\sigma^2}. \tag*{(4)}

Here, pextp_{\mathrm{ext}} represents the external constant pressure, h0(x)h_0(x) is the arterial wall thickness, and A0(x)A_0(x) is the cross-sectional area in the equilibrium state (p,u)=(pext,0)(p,u)=(p_{\mathrm{ext}},0). The constant ν\nu is a viscoelastic coefficient that depends on the artery’s thickness, E(x)E(x) denotes Young’s modulus, and σ\sigma is Poisson’s ratio. Equation (3) incorporates a viscoelastic correction to the pressure, with the coefficient β\beta defined in (4), which accounts for the mechanical properties of the arterial wall. In order to make the model more tractable is customary to choose A0A_0 and β\beta as positive constants independent of the xx-variable.

An alternative formulation of the system of governing equations (1.1) can be obtained for the triple (A,u,p)(A,u,p) where u(x,t)u(x,t) denotes the blood velocity. Indeed, writing Q=AuQ=Au and taking α=1\alpha=1 we find the alternative system

At+(Au)x=0,(5)A_t + (Au)_x = 0, \tag*{(5)}
ut+uux=−pxρ+fρA.(6)u_t + uu_x = -\frac{p_x}{\rho} + \frac{f}{\rho A}. \tag*{(6)}

together with the same constitutive law

p=pext+βA0(A−A0)+νA0(A)t.(7)p = p_{\mathrm{ext}} + \frac{\beta}{A_0}\left(\sqrt{A}-\sqrt{A_0}\right) + \frac{\nu}{A_0}\left(\sqrt{A}\right)_t. \tag*{(7)}

Following the work [6], the friction term f=f(u)f=f(u) is defined as a Poiseuille parabolic velocity profile f(u)=κuf(u)=\kappa u where κ≥0\kappa\ge0 is related to the blood viscosity.

Previous works and results. System (1.1) together with the relation (3) was introduced in [1] and its well-posedness has been studied later in [9, 19]. In particular, in [19] the authors studied the existence and uniqueness of maximal solutions with suitable nonlinear Robin boundary conditions. Additionally, it has been utilized in [7, 18] for hemodynamic parameter estimation and in [21, 28, 29] for the development and analysis of numerical schemes, particularly those accounting for the viscoelastic correction term. For more general constitutive laws including for instance second time derivatives we refer the interested reader to [3, 9].

When the viscoelastic coefficient ν\nu is set to zero, system (1.1)-(3) can be written as an hyperbolic quasilinear system and several well-posedness results via classical hyperbolic techniques are available in the literature [8, 21]. However, it seems that from the numerical point of view [22] the viscoelastic term plays a significant role when comparing numerical models with in vivo data [18]. It has been shown that incorporating viscoelastic wall models yields more physiologically accurate predictions than purely elastic models. Indeed, one-dimensional elastic models tend to overestimate both blood pressure and vessel deformation, as highlighted in [6, 26, 27].

1.1. Contributions and main results. The purpose of this paper is twofold. First, we derive a unidirectional asymptotic equation associated with the one-dimensional blood flow model (1.1)–(3). The derivation relies on a multi-scale expansion in the small-amplitude/long-wave parameter 0<ε≪10<\varepsilon\ll1 (cf. [2, 4, 13]), which reduces the full system to a hierarchy of linear problems that can be closed at a prescribed order of accuracy. More precisely, we write

A=A‾0+εh=1+εh,u=u‾0+εU=εU.A=\overline{A}_0+\varepsilon h=1+\varepsilon h,\qquad u=\overline{u}_0+\varepsilon U=\varepsilon U.

and introduce the formal expansions

h(x,t)=∑ℓ=0∞εℓh(ℓ)(x,t),U(x,t)=∑ℓ=0∞εℓU(ℓ)(x,t).h(x,t)=\sum_{\ell=0}^{\infty}\varepsilon^\ell h^{(\ell)}(x,t),\qquad U(x,t)=\sum_{\ell=0}^{\infty}\varepsilon^\ell U^{(\ell)}(x,t).

Truncating the expansion at order O(ε2)\mathcal{O}(\varepsilon^2) yields the following unidirectional model for (1.1)–(3):

ft=MP[−1ε(1−β2)fxx+1εκfx−1εν2fxxx+(2+β4)(ffx)x+1εν4fxfxx−ν4ffxxx−2κffx](8)f_t=\mathcal{M}\mathcal{P}\left[-\frac{1}{\varepsilon}\left(1-\frac{\beta}{2}\right)f_{xx}+\frac{1}{\varepsilon}\kappa f_x-\frac{1}{\varepsilon}\frac{\nu}{2}f_{xxx}+\left(2+\frac{\beta}{4}\right)(ff_x)_x+\frac{1}{\varepsilon}\frac{\nu}{4}f_xf_{xx}-\frac{\nu}{4}ff_{xxx}-2\kappa f f_x\right] \tag*{(8)}

for the asymptotic unknown f(x,t):=h(0)(x,t)+εh(1)(x,t)f(x,t):=h^{(0)}(x,t)+\varepsilon h^{(1)}(x,t). The nonlocal operators in (8) are Fourier multipliers defined by

P:=(κ−ν2∂xx)−1,M:=(Id⁡−4(∂xκ−ν2∂xx)2)−1(Id⁡+2∂xκ−ν2∂xx)(9)\mathcal{P}:=\left(\kappa-\frac{\nu}{2}\partial_{xx}\right)^{-1},\qquad\mathcal{M}:=\left(\operatorname{Id}-4\left(\frac{\partial_x}{\kappa-\frac{\nu}{2}\partial_{xx}}\right)^2\right)^{-1}\left(\operatorname{Id}+\frac{2\partial_x}{\kappa-\frac{\nu}{2}\partial_{xx}}\right) \tag*{(9)}

with symbols

Pf^(k)=1κ+12∣k∣2f^(k),Mf^(k)=m(k)f^(k),m(k)=(1+4∣k∣2(κ+12∣k∣2)2)−1(1+2ikκ+12∣k∣2).(10)\widehat{\mathcal{P}f}(k)=\frac{1}{\kappa+\frac{1}{2}|k|^2}\widehat{f}(k),\qquad\widehat{\mathcal{M}f}(k)=m(k)\widehat{f}(k),\qquad m(k)=\left(1+4\frac{|k|^2}{\left(\kappa+\frac{1}{2}|k|^2\right)^2}\right)^{-1}\left(1+\frac{2\mathrm{i}k}{\kappa+\frac{1}{2}|k|^2}\right). \tag*{(10)}

The second goal of the paper is to study analytical properties of the reduced model (8). Our main results can be summarized as follows:

  • Local well-posedness. For s>52s>\frac{5}{2} and mean-zero data f0∈Hs(T)f_0\in H^s(\mathbb{T}), we prove existence and uniqueness of a strong solution f∈C([0,T];Hs(T))f\in C([0,T];H^s(\mathbb{T})) on a time interval [0,T][0,T] depending only on ∥f0∥Hs\|f_0\|_{H^s} and the physical parameters; see Theorem 3.1 in § 3.

  • Global small-data theory in the BBM regime. In the purely elastic case ν=0\nu=0 (for which (8) can be written in a BBM-type local form), and assuming β>−2\beta>-2, we establish global existence and decay in H2(T)H^2(\mathbb{T}) for sufficiently small mean-zero initial data; see Theorem 4.1 in § 4.

  • Numerical simulations. Finally, we present a numerical study of the asymptotic model, including experiments in the viscoelastic regime (ν>0\nu>0) for different amplitudes and parameter values, as well as simulations in the purely elastic case (ν=0\nu=0). These computations illustrate the qualitative behavior of the solutions across several regimes and are interpreted in light of the continuation criterion; see § 5.

From a modeling viewpoint, equation (8) describes the slow modulation (on the long time scale τ=εt\tau=\varepsilon t) of small-amplitude, long-wave disturbances propagating predominantly in one direction along the vessel, i.e. a single traveling-wave branch selected by the far-field change of variables ξ=x−t\xi=x-t. In this reduced regime, β\beta encodes the effective wall elasticity (and thus the characteristic wave speed), while κ\kappa accounts for viscous damping due to frictional losses (e.g. Poiseuille-type resistance) and ν\nu introduces a viscoelastic correction that regularizes the dynamics through higher-order dispersive/dissipative effects. Consequently, the competition between elastic propagation, damping, and viscoelastic regularization is captured at the level of (8), providing a tractable one-dimensional model for wave dynamics in compliant arteries.

Notation and preliminaries

References

  1. [1]J. Alastruey, A. W. Khir, K. S. Matthys, P. Segers, S. J. Sherwin, P. V. Verdonck, K. H. Parker, and J. Peiró. Pulse wave propagation in a model human arterial network: Assessment of 1-D visco-elastic simulations against in vitro measurements. Journal of Biomechanics, 44, 2250–2258 (2011).DOI
  2. [2]D. Alonso-Orán, Á. Durán, and R. Granero-Belinchón. Derivation and well-posedness for asymptotic models of cold plasmas. Nonlinear Analysis, 244, 113539 (2024).
  3. [3]R. L. Armantano, J. G. Barra, J. Levenson, A. Simon, and R. H. Pichel. Arterial wall mechanics in conscious dogs: Assessment of viscoelastic, inertial, and elastic moduli to characterize aortic wall behavior. Circulation Research, 76(3), 468–478 (1995).
  4. [4]C. H. Arthur Cheng, R. Granero-Belinchón, S. Shkoller, and J. Wilkening. Rigorous asymptotic models of water waves, Water Waves, 1, 71–130 (2019).arxiv.org/abs/1807.00176
  5. [5]S. R. Bistafa. Euler, Father of Hemodynamics. Advances in Historical Studies, 7(2), 97–111 (2018).DOI
  6. [6]E. Boileau, P. Nithiarasu, P. J. Blanco, L. O. Müller, F. E. Fossan, L. R. Hellevik, W. P. Donders, W. Huberts, M. Willemet, and J. Alastruey. A benchmark study of numerical schemes for one-dimensional arterial blood flow modelling. International Journal for Numerical Methods in Biomedical Engineering, 31(10) (2015).DOI
  7. [7]A. Caiazzo, F. Caforio, G. Montecinos, L. O. Müller, P. J. Blanco, and E. F. Toro. Assessment of reduced-order unscented Kalman filter for parameter identification in 1-dimensional blood flow models using experimental data. International Journal for Numerical Methods in Biomedical Engineering, 33, e2843 (2017).DOI
  8. [8]S. Čanić and E. H. Kim. Mathematical analysis of the quasilinear effects in a hyperbolic model blood flow through compliant axi-symmetric vessels. Mathematical Methods in the Applied Sciences, 26, 1161–1186 (2003).DOI
  9. [9]S. Čanić, C. J. Hartley, D. Rosenstrauch, J. Tambača, G. Guidoboni, and A. Mikelic. Blood flow in compliant arteries: An effective viscoelastic reduced model, numerics, and experimental validation. Annals of Biomedical Engineering, 34, 575–592 (2006).pubmed.ncbi.nlm.nih.gov/16550449
  10. [11]A. Fasano and A. Sequeira. Hemomath. The Mathematics of Blood. Springer, 2017.
  11. [13]R. Granero-Belinchón, S. Scrobogna. Global well-posedness and decay for viscous water wave models, Physics of Fluids, 33, 102–115 (2021).
  12. [15]T. Kato and G. Ponce. Commutator estimates and the Euler and Navier-Stokes equations. Comm. Pure Appl. Math., 41 (7): 891–907, 1988.DOI
  13. [16]C. E. Kenig, G. Ponce, and L. Vega. Well-posedness of the initial value problem for the Korteweg-de Vries equation. J. Amer. Math. Soc., 4 (2):323–347, 1991.DOI
  14. [18]R. Lal, B. Mohammadi, and F. Nicoud. Data assimilation for identification of cardiovascular network characteristics. International Journal for Numerical Methods in Biomedical Engineering, 33, e2824 (2017).DOI
  15. [19]D. Maity, J.-P. Raymond, and A. Roy. Existence and uniqueness of a maximal strong solution of a 1D blood flow in a network of vessels. Nonlinear Analysis: Real World Applications, 63, 103405 (2021).DOI
  16. [20]A. J. Majda and A. L. Bertozzi. Vorticity and Incompressible Flow. Cambridge Texts in Applied Mathematics. Cambridge University Press, Cambridge (2002).DOI
  17. [21]G. I. Montecinos, L. O. Müller, and E. F. Toro. Hyperbolic reformulation of a 1D viscoelastic blood flow model and ADER finite volume schemes. Journal of Computational Physics, 266, 101–123 (2014).DOI
  18. [22]L. O. Müller, G. Leugering, and P. J. Blanco. Consistent treatment of viscoelastic effects at junctions in one-dimensional blood flow models. Journal of Computational Physics, 314, 167–193 (2016).DOI
  19. [26]S. J. Sherwin, V. Franke, J. Peiró, and K. Parker. One-dimensional modelling of a vascular network in space-time variables. Journal of Engineering Mathematics, 47(3-4), 217–250 (2003).DOI
  20. [27]O. Shramko, A. Svitenkov, and P. Zun. Gravity influence in one-dimensional blood flow modeling. Procedia Computer Science, 229, 8–17 (2023).arxiv.org/abs/2306.13768
  21. [28]X. Wang, J.-M. Fullana, and P.-Y. Lagrée. Verification and comparison of four numerical schemes for a 1D viscoelastic blood flow model. Computer Methods in Biomechanics and Biomedical Engineering, 18, 1704–1725 (2015).
  22. [29]X. Wang, S. Nishi, M. Matsukawa, A. Ghigo, P.-Y. Lagrée, and J.-M. Fullana. Fluid friction and wall viscosity of the 1D blood flow model. Journal of Biomechanics, 49, 565–571 (2016).DOI

Paper details

vlnc:W_3dbycxx5
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 2

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents