WorksPhysics and Astronomy
On the mechanical, thermoelectric, and excitonic properties of Tetragraphene monolayer
Abstract
Two-dimensional carbon allotropes have attracted much attention due to their extraordinary optoelectronic and mechanical properties, which can be exploited for energy conversion and storage applications. In this work, we use density functional theory simulations and semi-empirical methods to investigate the mechanical, thermoelectric, and excitonic properties of Tetrahexcarbon (also known as Tetragraphene). This quasi-2D carbon allotrope exhibits a combination of squared and hexagonal rings in a buckled shape. Our findings reveal that tetragraphene is a semiconductor material with a direct electronic bandgap of 2.66 eV. Despite the direct nature of the electronic band structure, this material has an indirect exciton ground state of 2.30 eV, which results in an exciton binding energy of 0.36 eV. At ambient temperature, we obtain that the lattice thermal conductivity for tetragraphene is approximately 118 W/mK. Young's modulus and the shear modulus of tetragraphene are almost isotropic, with maximum values of 286.0 N/m and 133.7 N/m, respectively, while exhibiting a very low anisotropic Poisson ratio value of 0.09.
Introduction
Two-dimensional (2D) carbon-based materials have attracted considerable attention due to their extraordinary physical and chemical properties, which have been exploited in flat electronics applications.[1, 2] This fact is partly due to the revolution in materials science created by the advent of graphene.[1, 2] Graphene has unique features combining high electrical conductivity, robust mechanical strength, and excellent thermal properties.[3, 4] These characteristics allow various applications, from organic electronics[3] to energy storage[5] and sensor technologies.[3, 6]
In addition to graphene, many other 2D carbon structures, including graphyne,[7, 8, 9] biphenylene monolayers,[10, 11] amorphous carbon,[12] [13] and fullerene networks,[14, 15, 16] were inspected, most of which have been successfully synthesized. Despite these accomplishments, the search for novel carbon allotropes continues with an emphasis on structures that could overcome some specific limitations associated with graphene, mainly its zero electronic bandgap, which limits its use in digital electronic devices.
Computational methodologies for material design have become an important and reliable tool in research for various compelling reasons. Theoretical predictions of novel nanostructured materials can precede their synthesis by many years or even decades. Some examples include the biphenylene and the fullerene networks, which were theoretically predicted in 1987[17] and 1990[18], respectively. In this sense, the ability to simulate and predict material properties through computational models enables virtual experiments, thereby speeding up the exploration and advancement of novel materials.
Recently, a novel quasi-2D carbon nanostructure named tetrahexcarbon was introduced by Ram and Mizuseki[19]. This structure exhibits a combination of squared and hexagonal rings in a buckled shape (see Figure 1). Due to this combination, an alternative name for the structure (tetragraphene[20]) has been proposed, and we adopted it in the present study. Tetragraphene contains carbon atoms in and hybridizations. It is a semiconductor material with a direct electronic bandgap of 3.70 eV. It also presents high electronic mobility () and relatively low cohesion energy.[19]
Investigations into the electronic properties of tetragraphene-like structures have revealed metallic and semiconductor characteristics, with bandgap values ranging from 0.82 up to 4.4 eV, depending on structural parameters.[20] Studies on the mechanical properties of tetragraphene, using density functional theory (DFT) approaches, predicted values of Young’s moduli along the zigzag and armchair directions of 280 N/m to 288 N/m.[19, 20, 21, 22] They also exhibit an intrinsic negative Poisson’s ratio and predicted rupture stresses and strains along zigzag and armchair directions of 40% to 50% and 33% to 40%, respectively.[21] Based on these unique characteristics, we comprehensively explored tetragraphene’s thermoelectric and excitonic properties to address its potential to serve as an active layer in thermal transport and energy conversion applications. To our knowledge, no studies have been reported on these relevant aspects of tetragraphene.
In this work, we use DFT simulations to investigate the mechanical, thermoelectric, and excitonic properties of tetragraphene. Through our computational approach, we obtained valuable information about this material’s electronic and structural characteristics. In addition, we have also inspected optical and vibrational properties, along with a discussion of their Raman spectra.
Theoretical Methods
Computational details
The electronic band structure and density of states (DOS) were acquired using the plane wave-based Quantum Espresso (QE) code.[23] The structural geometry was optimized using a variable cell relaxation procedure until the force acting on each atom is less than Ry/au and the pressure is not larger than 0.16 kbar. Scalar relativistic projector augmented wave (PAW) potentials[24, 25] within the Perdew-Burke-Ernzerhof (PBE) parametrization[26] in the Generalized Gradient approximation (GGA)[27] were used for the exchange-correlation functional. A cutoff energy of 60 Ry and a dense electronic grid were sufficient to achieve a good convergence of the total energy value. A 17 Å vacuum buffer layer was added along the non-periodic direction to avoid undesirable interactions of the unit cell with its images. The electronic transport properties were obtained using the BOLTZTRAP code[28] with an electronic k-mesh of .
To improve the electronic bandgap description, which is underestimated in the PBE framework due to self-interaction errors,[29, 30] we used the hybrid exchange-correlation functional proposed by Heyd–Scuseria–Ernzerhof (HSE06).[31, 32, 33] The Fock exchange was treated using the adaptive compressed exchange (ACE) method[34] with a k-mesh of . Due to the heaviness of the calculation, we kept a electronic k-mesh to deal with the PBE part of the Hamiltonian. Also, we used the same cutoff energy of the PBE simulation.
To analyze the structural stability of the tetragraphene (TG) monolayer, a phonon dispersion spectra over a phonon () grid was also computed using a density function perturbation theory approach (DFPT),[35, 36] implemented in QE. A -grid was used to obtain well-converged phonon density of states (PhDOS). Using the QERAMAN code[37] interfaced with QE, first-order resonant Raman spectra at various laser energies were also estimated.
The elastic constants of the TG monolayer were determined using the THERMO_PW code,[38, 39] which is also interfaced with QE. The code generally applies strain along several directions of the material and fits several strain-stress curves to extract the corresponding elastic constants. For the case of the 2D TG, a total of twelve relaxation steps and an electronic grid produced converged values.
To probe the excitonic effects, we used a maximally localized Wannier functions tight binding (MLWF-TB) Hamiltonian to deal with quasi-particle effects and optical properties, as implemented in the WanTiBEXOS code.[40] The MLWF-TB Hamiltonian was obtained at the HSE06 level from the Wannier90 package.[41] The Wannierization procedure was performed considering the and orbitals of the carbon atoms. The Bethe–Salpeter equation (BSE)[42, 43] was solved using a Coulomb truncated 2D potential (V2DT)[44] and a -mesh of . For the BSE solution, the highest three valence bands and the lowest two conduction bands were taken into account. A smearing of 0.05 eV was utilized to compute the absorption coefficient at the BSE and independent particle approximation (IPA) levels.
Results
Structural Properties
The top and side views of the TG monolayer are shown in Fig. 1(a), and the corresponding Brillouin zone (BZ) with the high symmetry points are displayed in Fig. 1(b). The primitive unit cell contains six C atoms and the structure belongs to the space group, with a lattice constant of 3.79 Å and
Figure 1. (a) Top and side views of a TG monolayer. The red parallelogram indicates the primitive unit cell. (b) The first Brillouin zone and its respective high symmetry k-points.
an angle of 73.19° between the in-plane lattice vectors. Unlike graphene, the TG monolayer is not planar and has a buckling distance of 0.58 Å between two out-of-plane carbon atoms.
Another new 2D structure with a unit cell containing six atoms is the recently predicted structure[45] of transition metal dichalcogenides (TMDs), namely PdS, PdSe, and PdSSe, whose excitonic properties have been recently investigated.46 Its BZ is a tilted irregular hexagon, a signature of the monoclinic spacegroup (Figure 2). We tested the carbon version of this topology using a variable cell relaxation simulation. We observed that the C- system is unstable and undergoes a phase transition to the TG structure (Figure 2).
Figure 2. A variable cell relaxation simulation shows that a carbon structure is unstable, transitioning to the more energy-favorable TG structure.
The cohesive energy () of tetragraphene is determined by the values of its total energy and the energy of each carbon atom in the unit cell. In eV/atom:
where is the total energy, and is the energy of an isolated C atom. We obtained the value of eV/atom, indicating that the structure is energetically stable. This value is slightly larger than that of graphene ( eV/atom eV/atom)47 and graphyne ( eV/atom),48 but closer to the one for penta-graphene ( eV/atom).49
Elastic constants and mechanical stability
The response of any material to the deformations under which it is subjected depends on several parameters, including its elastic constants. These constants are also important to estimate its mechanical stability. For a 2D system, in specific, the in-plane related elastic constants are the most important, namely where . For the TG monolayer, we obtained GPa, GPa, GPa, and GPa. Since , , and and , the material can be considered structurally stable. To obtain vacuum-independent results, the values have to be multiplied by , where is the distance along the non-periodic direction. We further obtained N/m N/m, N/m, N/m, and N/m, which are near to the values reported in the work of Wei et al..[21]
To verify TG’s structural anisotropy, orientation-dependent parameters should be determined. In particular, we evaluated Young’s modulus (), the shear modulus (), and the Poisson ratio () as a function of an in-plane angle (), and the different compliance’s 50,51:
Electronic Properties
The electronic band structure in the left panel of Figure 4 shows that the TG monolayer has a PBE(HSE06) direct band gap of eV( eV) localized at the high symmetry point. The projected density of states (PDOS) at the PBE level, shown
Figure 4. (Left panel) Tetragraphene monolayer electronic band structure at the PBE (blue curves) and HSE06 (red curves) levels. (Right panel) Projected Density of States (PDOS) onto the carbon’s and orbitals. The Fermi level value is set at 0 eV.
and are defined in a way that:
From Figure 3, we realize that both and are almost isotropic, with maximum values of 286.0 N/m and 133.7 N/m, respectively. However, the polar graph of the Poisson’s ratio () shows an anisotropic behavior reaching a maximum value of 0.09 for , , , and . Having satisfied further evidences the structural stability of the TG monolayer.
Figure 3. 2D polar representation of (a) Young’s modulus (N/m), (b) Shear modulus (N/m), and (c) Poisson’s ratio in the plane for the TG monolayer.
Electronic Properties
The electronic band structure in the left panel of Figure 4 shows that the TG monolayer has a PBE(HSE06) direct band gap of eV( eV) localized at the high symmetry point. The projected density of states (PDOS) at the PBE level, shown in the right panel of Figure 4, demonstrates that the top valence band (TVB) has a majority contribution from the orbital followed by a contribution from the orbital. However, the main contribution of the bottom conduction band (BCB) comes from the orbital, but also with contribution from the and orbitals. These features differ from those observed in graphene, where the orbitals majorly compose these states. This difference can be attributed to the buckling in the tetragraphene case, which additionally has a -bond character in the carbon-carbon interactions, in contrast to the electrons contributing to the BCB and TVB in graphene.
Vibrational properties and Raman spectra
The phonon dispersion of the TG monolayer along the -C-Y-V--Y symmetry path is displayed in Figure 5. Since the structure has six carbon atoms in its primitive unit cell, we expect eighteen vibrational modes, three of which are acoustic and the other fifteen optical. No negative phonon frequencies were observed along the selected path, consistent with a structurally stable structure. The flexural mode (ZA), the lowest phonon branch, follows a parabolic dispersion in the vicinity of the point, a signature of 2D materials,52–57 including graphene.58 Conversely, the longitudinal (LA) and transverse (TA) acoustic modes show a linear dispersion behavior.
Figure 5. Phonon dispersion (left panel) of the TG monolayer and its phonon DOS (right panel).
Two interesting facts can be inferred from the phonon dispersion branches. Firstly, an optical-optical phonon bandgap of can be observed between the low and high optical modes. The ability to tune such a bandgap by applying strain or stacking up more layers can be an essential feature in applications involving selective frequency transmission. Secondly, the highest four optical modes are flatter (low dispersion) than the others, translating into sharp peaks in the material’s phonon DOS (PhDOS). Consequently, such modes have a small group velocity and, thus, do not significantly affect the thermal phonon transport properties.
Figure 6 exhibits the fifteen optical modes of the TG monolayer. Optical modes 3 and 4 are characterized by almost perfect perpendicular vibrations of four of the six carbon atoms, while all atoms vibrate perpendicularly in the seventh mode. Nevertheless, most of the remaining modes have their carbon atoms vibrating within the plane of the structure, with small motions along the perpendicular direction, except for modes 5, 6, and 9.
Figure 6. Optical phonon modes, at the point, of a TG monolayer. The arrows indicate the directions of the atoms’ displacements.
Not all phonon modes are Raman (R) or Infrared active (IR). Figure 7 displays the calculated Raman spectra for linear and circular polarizations and at different laser energy values (), ranging from the far IR to the ultraviolet (UV) regime. Three peaks occur at 688.46 cm, 1007.6 cm, and 1700.58 cm. We realize that the first and third peaks remain intense enough for the different laser energies. Yet, for values larger than or equal to 2.33 eV and as increases, the second peak’s intensity fades away, becoming negligible compared to the others. The first peak could be attributed to the fifth mode in Figure 6, while the second peak could be ascribed to the ninth mode. The third peak corresponds to the fifteenth optical mode.
Figure 7. Raman spectra with laser excitation energies in the infrared, visible, and ultraviolet regimes for linearly (XX, XY) and circularly (, ) polarized light. “I” refers to the intensity of the peaks in arbitrary units.
Naively, we might consider that all modes with zero intensity in the IR are Raman active. To ensure that only the modes mentioned above are Raman active, we calculated the intensity of the IR modes (Figure 8). Our calculations reveal that optical modes 3, 7, 12, and 14 are IR-active. We thus speculate that the remaining eight modes are silent; they are neither IR nor Raman active.
Figure 8. The IR spectrum of the TG monolayer and its corresponding vibrational modes.
Thermoelectric Properties
In Figure 9-(a), we present the electrical conductivity tensor calculated using the Boltztrap code without carrier excess, with a null chemical potential (), as a function of temperature, considering the X and Y directions within the 2D plane. The electrical conductivity is almost zero for temperatures below 600 K. This behavior is characteristic of semiconductors, as electrons would acquire sufficient energy to overcome the energy gap barrier only above a specific temperature threshold. We also observe that the electrical conductivity along both directions within the plane is nearly identical, with a slight difference at higher temperatures. Hence, as far as electrical transport is concerned, the system is essentially isotropic.
Figure 9. (a) Electrical conductivity tensors as a function of temperature, considering the X and Y directions within the 2D plane. (b) The Arrhenius plot required to determine the relaxation time, as described in reference59.
Figure 9-(b) demonstrates the Arrhenius plot considering the electrical conductivity presented in Figure 9-(a). From the plot’s slope, we have estimated that tetragraphene’s bandgap is approximately 1.7 eV, a value very close to that deduced from the electronic band structure. Constructing the Arrhenius plot enables us to determine the linear coefficient, discussed in the work of Tromer et al.⁵⁹, needed to estimate the electronic relaxation time as:
where is a previously calculated reference value for nitrogen-doped graphene at the reference temperature K. We will use the values fs and, , from Ref. ⁵⁹. The quantity is an auxiliary function given by:
Once we have confirmed the system is isotropic, we will consider the average quantities along the 2D plane, where
is an estimated parameter derived from the BoltzTraP code. Figure 10 shows the electronic relaxation time () as a function of temperature (), using the scheme discussed previously. We note that presents an exponential decay behavior, as expected for 2D systems.
Figure 10. Electronic relaxation time () as a function of temperature of the TG monolayer.
Another critical parameter required for analyzing the thermoelectric properties of a particular system is the lattice thermal conductivity (). Using the method outlined in Ref.60, we estimate the value for tetragraphene to be approximately W/mK. This value is significantly lower than that of graphene (3084.6 W/mK), graphenylene (600.0 W/mK), and T-graphene (800.0 W/mK), but comparable to the thermal conductivity of the biphenylene network (208.0 W/mK)59.
To determine the values of at higher temperatures, we assume that its temperature dependence follows a power-law relationship with an exponent equal to , a characteristic of 2D systems.61 We will, therefore, use a straightforward heuristic approach by defining the function as , with T ranging from 300 up to 800. The values of for different temperatures are depicted in Figure 11.
Figure 11. Lattice thermal conductivity of the TG monolayer as a function of temperature.
Figure 12 depicts the various thermoelectric properties as a function of a varying chemical potential (Fermi level at zero) at 350 K, 550 K, and 800 K. Negative chemical potential values correspond to hole doping, while positive values denote electron doping. It is important to note that the electrical conductivity , the electronic contribution to thermal conductivity , and consequently, the power factor () have been adjusted by the relaxation time values.
Figure 12. Thermoelectric coefficients as a function of positive (electron doping) and negative (hole doping) values of the chemical potential at different temperatures.
In Figure 12-(a), we observe a notable null region near the Fermi level for the electrical conductivity. This region corresponds to the energy gap of the material, where electrons lack sufficient energy to transition from the valence band to the conduction band. Only for slightly higher chemical potential values does the electrical conductivity exhibit non-zero values due to the formation of excitons. Additionally, the material displays more efficient hole transport than electron transport, maximizing in the case of holes. Furthermore, the electrical conductivity decreases with increasing temperature, which is attributed to the fact that at higher temperatures, the number of charge carriers increases, affecting the mobility and reducing the electrical conductivity.
The Seebeck coefficient is presented in Figure 12-(b), which physically represents the magnitude of the thermoelectric voltage generated in response to a given temperature. Notably, the figure shows a nearly symmetrical behavior with respect to . Moreover, the highest contribution to the Seebeck coefficient occurs in regions around the Fermi level.
The contribution of electrons/holes to the material’s thermal electronic conductivity is shown in Figure 12-(c). Compared to the lattice thermal conductivity shown in Figure 11, we observe that the contribution of electrons/holes is at least one order of magnitude lower. Hence, phonons play a substantially significant role in the material’s thermal conductivity. To maximize the material’s thermoelectric efficiency, exerting control over phonons is paramount.
A critical parameter in the context of thermoelectric materials and devices, which significantly influences their performance, is the power factor (), presented in Figure 12-(d). For the TG monolayer, we observe that the power factor reveals a peak efficiency when the chemical potential approaches approximately V due to the distinct contributions from holes and electrons. Notably, the maximum power factor occurs at different temperatures for holes and electrons, with 350 K and 800 K being the optimal temperatures. These findings indicate the critical influence of the chemical potential and temperature on thermoelectric performance, highlighting the importance of carefully considering these factors in designing and optimizing thermoelectric materials and devices.
The power factor provides valuable insights into a material’s suitability for thermoelectric applications by highlighting its ability to convert thermal gradients into electrical power. However, it is important to note that while a high is desirable, it does not provide a complete picture of a material’s overall thermoelectric efficiency. Other factors, such as thermal conductivity and device design, must also be considered to fully determine the performance of thermoelectric systems.
The quantity that comprehensively determines the thermoelectric conversion efficiency is known as the figure of merit, denoted as , and is evaluated as follows:
Note that is the ratio of the power factor quantity and the thermal conductivity multiplied by the temperature parameter .
Finally, Figure 13 portrays the variation of with the chemical potential at three disparate temperatures for the TG monolayer. Akin to the case of the PF, the peak values are also located at chemical potential values of approximately . These values are highly temperature-dependent and tend to increase with increasing temperature. This behavior is due to the substantial decrease in the thermal conductivity of the lattice with increasing temperature, as observed in Figure 11. The maximum efficiency for holes (0.04) is nearly twice that obtained for electrons (0.02) at K. At lower values, the peak intensities are similar. Still, those associated with holes are always slightly larger.
Figure 13. Figure of merit as a function of the chemical potential for different temperatures .
Excitonic and Optical properties
As extensively reported, excitonic effects tend to be significant in 2D materials[43] [62, 63] considering the description of the optical absorption spectrum. From the TG’s excitonic band structure in Figure 14, we can observe that despite the direct nature of the electronic band structure, we have an indirect exciton ground state of 2.30 eV, between the and Y symmetry points, resulting in an excitonic binding energy of 0.36 eV.
Figure 14. The excitonic band structure (DFT-HSE06-BSE) of the Tetragraphene monolayer.
This nontrivial, indirect excitonic behavior can be explained by the electron-hole pair orbital characteristics combined with the Coulomb interaction that binds both, which also depends on their momentum. An analogous behavior, where the bandgap is direct and the excitonic ground state is indirect, has been reported in the literature64,65. The direct exciton ground state is bright, i.e., optically active, with an energy of 2.41 eV. The indirect nature of the fundamental excitonic ground state enables phonon-assisted optical transitions with photon excitation energy lower than the optical band gap of 2.41 eV. However, since the difference between the direct and indirect excitonic ground states is low ( eV), other optical band gap energy variations are not expected for phonon-assisted transitions.
The optical linear response, at IPA and BSE approximations, represented by the absorption coefficient, refractive index, and reflectivity, are outlined in Figure 15 (a), (b), and (c), respectively. From Figure 15(a), we can observe that the quasi-particle effects not only result in a redshift of the spectrum but also change the absorption intensity of the peaks, which are smaller at the BSE level. The system shows a small optical anisotropy independent of BSE or IPA levels, resulting in a different peak absorption intensity for and light polarizations. Furthermore, the optical bandgap from BSE (2.41 eV) and IPA (2.66 eV) calculations remain the same.
Figure 15. TG monolayer optical properties: (a) absorption coefficient, (b) refractive index, (c) reflectivity; at BSE (solid curves) and IPA (dashed curves) levels, considering linear (blue curves) and (red curves) polarizations.
Figure 15(b) shows that at 0 eV, the refractive index at the IPA and BSE levels is approximately 1.47. The quasi-particle effects seem to enhance (reduce) the refractive index for optical excitations lower (higher) than 4.0 eV. A similar comportment is shown in the reflectivity (Figure 15(b)), which achieves a maximum value of 0.07 (0.09) at the BSE (IPA) level, meaning that less than 10 % of the light is reflected off this material.
Conclusions
In this work, we have carried out a complete investigation into the mechanical, thermoelectric, and excitonic properties of a tetragraphene monolayer using DFT simulations and semiempirical methods. This unique material is characterized by a quasi-2D structure with a combination of squared and hexagonal rings built in a buckled shape. Our findings identify the tetragraphene monolayer as a direct bandgap semiconductor with a bandgap value of about 2.66 eV at the HSE06 level. It also exhibits an indirect excitonic ground state with an energy of 2.30 eV, leading to an excitonic binding energy of 0.36 eV. Furthermore, the lattice thermal conductivity of tetragraphene is approximately W/mK. This value is significantly lower than that of graphene (3084.6 W/mK), graphenylene (600.0 W/mK), and T-Graphene (800.0 W/mK), but comparable to the thermal conductivity of the biphenylene network (208.0 W/mK). Monolayer tetragraphene is mechanically stable, possessing an ultralow Poisson ratio of 0.09. Regarding the thermoelectric properties, our results show that the maximum figure of merit (efficiency) occurs for holes at an energy of eV below the Fermi level. The same pattern is preserved at higher temperatures but with larger values of ZT reaching 0.04 at T=800 K in the case of hole doping.
Acknowledgement The authors are grateful for the computational resources provided by Centro Nacional de Processamento de Alto Desempenho in São Paulo-CENAPAD-SP (proj 634, 897, and 909) and the Lobo Carneiro HPC (NACAD) at the Federal University of Rio de Janeiro (UFRJ) (proj 133 and 135). A.C.D. also thanks the financial support from National Council for Scientific and Technological Development (CNPq, grant number 408144/2022 − 0) and Federal District Research Support Foundation (FAPDF, grants number 00193 − 00001817/2023 − 43 and 00193 − 00002073/2023 − 84). L.A.R.J. acknowledges the financial support from FAP-DF grants 00193.00001808/2022 − 71 and 00193 − 00001857/2023 − 95 and FAPDF-PRONEM grant 00193.00001247/2021 − 20, and CNPq grant 350176/2022 − 1. RMT and DSG acknowledge support from CNPq and the Center for Computational Engineering and Sciences at Unicamp, FAPESP/CEPID Grant (2013/08293 − 7).
References
TOC Graphic
Figure 1 (PDF p. 17).
References
- [1]1 Novoselov, K. S.; Geim, A. K.; Morozov, S. V.; Jiang, D.; Zhang, Y.; Dubonos, S. V.; Grigorieva, I. V.; Firsov, A. A. Electric field effect in atomically thin carbon films. Science 2004, 306, 666–669, DOI: doi.org/10.1126/science.1102896.pubmed.ncbi.nlm.nih.gov/15499015
- [2]2 Novoselov, K. S.; Jiang, D.; Schedin, F.; Booth, T. J.; Khotkevich, V. V.; Morozov, S. V.; Geim, A. K. Two-dimensional atomic crystals. Proceedings of the National Academy of Sciences 2005, 102, 10451–10453, DOI: doi.org/10.1073/pnas.0502848102.pubmed.ncbi.nlm.nih.gov/16027370
- [3]3 Geim, A. K.; Novoselov, K. S. The rise of graphene. Nature materials 2007, 6, 183–191.
- [4]4 Balandin, A. A.; Ghosh, S.; Bao, W.; Calizo, I.; Teweldebrhan, D.; Miao, F.; Lau, C. N. Superior thermal conductivity of single-layer graphene. Nano letters 2008, 8, 902–907.DOI
- [5]5 Stoller, M. D.; Park, S.; Zhu, Y.; An, J.; Ruoff, R. S. Graphene-based ultracapacitors. Nano letters 2008, 8, 3498–3502.
- [6]6 Neto, A. C.; Guinea, F.; Peres, N. M.; Novoselov, K. S.; Geim, A. K. The electronic properties of graphene. Reviews of modern physics 2009, 81, 109.DOI
- [7]7 Hu, Y.; Wu, C.; Pan, Q.; Jin, Y.; Lyu, R.; Martinez, V.; Huang, S.; Wu, J.; Wayment, L. J.; Clark, N. A.; others Synthesis of γ-graphyne using dynamic covalent chemistry. Nature Synthesis 2022, 1, 449–454.DOI
- [8]8 Desyatkin, V. G.; Martin, W. B.; Aliev, A. E.; Chapman, N. E.; Fonseca, A. F.; Galvão, D. S.; Miller, E. R.; Stone, K. H.; Wang, Z.; Zakhidov, D.; others Scalable synthesis and characterization of multilayer γ-graphyne, new carbon crystals with a small direct band gap. Journal of the American Chemical Society 2022, 144, 17999–18008.DOI
- [9]9 Longuinhos, R.; Moujaes, E. A.; Alexandre, S. S.; Nunes, R. Theoretical chemistry of α-graphyne: functionalization, symmetry breaking, and generation of dirac-fermion mass. Chemistry of Materials 2014, 26, 3701–3708.DOI
- [10]10 Fan, Q.; Yan, L.; Tripp, M. W.; Krejčí, O.; Dimosthenous, S.; Kachel, S. R.; Chen, M.; Foster, A. S.; Koert, U.; Liljeroth, P.; others Biphenylene network: A nonbenzenoid carbon allotrope. Science 2021, 372, 852–856.DOI
- [11]11 Pereira, M.; da Cunha, W.; de Sousa, R.; Nze, G. A.; Galvão, D.; Ribeiro, L. On the mechanical properties and fracture patterns of the nonbenzenoid carbon allotrope (biphenylene network): a reactive molecular dynamics study. Nanoscale 2022, 14, 3200–3211.DOI
- [12]12 Toh, C.-T.; Zhang, H.; Lin, J.; Mayorov, A. S.; Wang, Y.-P.; Orofeo, C. M.; Ferry, D. B.; Andersen, H.; Kakenov, N.; Guo, Z.; others Synthesis and properties 13 Felix, L. C.; Tromer, R. M.; Autreto, P. A.; Ribeiro Junior, L. A.; Galvao, D. S. On the mechanical properties and thermal stability of a recently synthesized monolayer amorphous carbon. The Journal of Physical Chemistry C 2020, 124, 14855–14860.
- [14]14 Hou, L.; Cui, X.; Guan, B.; Wang, S.; Li, R.; Liu, Y.; Zhu, D.; Zheng, J. Synthesis of a monolayer fullerene network. Nature 2022, 606, 507–510, DOI: 10.1038/s41586-022-04771-5.DOI
- [15]15 Junior, L. R.; Junior, M. P.; Giozza, W.; Tromer, R.; Galvão, D. S. Thermal stability and fracture patterns of a recently synthesized monolayer fullerene network: A reactive molecular dynamics study. Chemical Physics Letters 2022, 807, 140075.
- [16]16 Tromer, R. M.; Junior, L. A. R.; Galvão, D. S. A DFT study of the electronic, optical, and mechanical properties of a recently synthesized monolayer fullerene network. Chemical Physics Letters 2022, 804, 139925.DOI
- [17]17 Baughman, R.; Eckhardt, H.; Kertesz, M. Structure-property predictions for new planar forms of carbon: Layered phases containing sp 2 and sp atoms. The Journal of chemical physics 1987, 87, 6687–6699.DOI
- [18]18 Belavin, V.; Bulusheva, L.; Okotrub, A.; Tomanek, D. Stability, electronic structure and reactivity of the polymerized fullerite forms. Journal of Physics and Chemistry of Solids 2000, 61, 1901–1911.DOI
- [19]19 Ram, B.; Mizuseki, H. Tetrahexcarbon: A two-dimensional allotrope of carbon. Carbon 2018, 137, 266–273.DOI
- [20]20 De Vasconcelos, F. M.; Souza Filho, A. G.; Meunier, V.; Girão, E. C. Electronic properties of tetra graphene nanoribbons. Physical Review Materials 2019, 3, 066002.
- [21]21 Wei, Q.; Yang, G.; Peng, X. Auxetic tetrahex carbon with ultrahigh strength and a direct band gap. Physical Review Applied 2020, 13, 034065.DOI
- [22]22 Kilic, M. E.; Lee, K.-R. Tuning the electronic, mechanical, thermal, and optical properties of tetrahexcarbon via hydrogenation. Carbon 2020, 161, 71–82.DOI
- [23]23 Giannozzi, P.; Baroni, S.; Bonini, N.; Calandra, M.; Car, R.; Cavazzoni, C.; Ceresoli, D.; Chiarotti, G. L.; Cococcioni, M.; Dabo, I.; others QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials. Journal of physics: Condensed matter 2009, 21, 395502, DOI: 10.1088/0953-8984/21/39/395502.DOI
- [24]24 Blöchl, P. E. Projector augmented-wave method. Physical review B 1994, 50, 17953, DOI: 10.1103/PhysRevB.50.17953.DOI
- [25]25 Kresse, G.; Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Physical review b 1999, 59, 1758, DOI: 10.1103/PhysRevB.59.1758.DOI
- [26]26 Perdew, J. P.; Burke, K.; Ernzerhof, M. Generalized gradient approximation made simple. Physical review letters 1996, 77, 3865, DOI: 10.1103/PhysRevLett.77.3865.DOI
- [27]27 Perdew, J. P.; Yue, W. Accurate and simple density functional for the electronic exchange energy: Generalized gradient approximation. Physical review B 1986, 33, 8800, DOI: 10.1103/PhysRevB.33.8800.DOI
- [28]28 Madsen, G. K.; Singh, D. J. BoltzTraP. A code for calculating band-structure dependent quantities. Computer Physics Communications 2006, 175, 67–71, DOI: 10.1016/j.cpc.2006.03.007.DOI
- [29]29 Cohen, A. J.; Mori-Sánchez, P.; Yang, W. Fractional charge perspective on the band gap in density-functional theory. Physical Review B 2008, 77, DOI: 10.1103/physrevb.77.115123.DOI
- [30]30 Crowley, J. M.; Tahir-Kheli, J.; Goddard, W. A. Resolution of the Band Gap Prediction Problem for Materials Design. The Journal of Physical Chemistry Letters 2016, 7, 918–1203, DOI: 10.1021/acs.jpclett.5b02870.
- [31]Heyd, J.; Scuseria, G. E. Efficient hybrid density functional calculations in solids: Assessment of the Heyd–Scuseria–Ernzerhof screened Coulomb hybrid functional. The Journal of chemical physics 2004, 121, 1187–1192, DOI: 10.1063/1.1760074.DOI
- [32]Hummer, K.; Harl, J.; Kresse, G. Heyd-Scuseria-Ernzerhof hybrid functional for calculating the lattice dynamics of semiconductors. Physical Review B 2009, 80, 115205, DOI: 10.1103/physrevb.80.115205.DOI
- [33]Moussa, J. E.; Schultz, P. A.; Chelikowsky, J. R. Analysis of the Heyd-Scuseria-Ernzerhof density functional parameter space. The Journal of chemical physics 2012, 136, 204117, DOI: 10.1063/1.4722993.DOI
- [34]Lin, L. Adaptively Compressed Exchange Operator. Journal of Chemical Theory and Computation 2016, 12, 2242–2249, DOI: 10.1021/acs.jctc.6b00092.DOI
- [35]Giannozzi, P.; Baroni, S. Density-functional perturbation theory. In Handbook of Materials Modeling: Methods; Springer, 2005; pp 195–214, DOI: 10.1007/978-1-4020-3286-8_11.
- [36]Baroni, S.; Giannozzi, P.; Isaev, E. Density-functional perturbation theory for quasi-harmonic calculations. Reviews in Mineralogy and Geochemistry 2010, 71, 39–57, DOI: 10.1515/9781501508448–005.
- [37]Hung, N. T.; Huang, J.; Tatsumi, Y.; Yang, T.; Saito, R. QERaman: An open-source program for calculating resonance Raman spectra based on Quantum ESPRESSO. Computer Physics Communications 2024, 295, 108967, DOI: 10.1016/j.cpc.2023.108967.DOI
- [38]Malica, C.; Dal Corso, A. Quasi-harmonic temperature dependent elastic constants: applications to silicon, aluminum, and silver. Journal of Physics: Condensed Matter 2020, 32, 315902, DOI: 10.1088/1361-648X/ab8426.
- [39]Malica, C.; Dal Corso, A. Quasi-harmonic thermoelasticity of palladium, platinum, copper, and gold from first principles. Journal of Physics: Condensed Matter 2021, 33, 475901, DOI: 10.1088/1361-648X/ac2041.DOI
- [40]Dias, A. C.; Silveira, J. F.; Qu, F. WanTiBEXOS: a Wannier based Tight Binding code for electronic band structure, excitonic and optoelectronic properties of solids. Computer Physics Communications 2022, 108636, DOI: https://doi.org/10.1016/j.cpc.2022.108636.
- [41]Mostofi, A. A.; Yates, J. R.; Lee, Y.-S.; Souza, I.; Vanderbilt, D.; Marzari, N. wannier90: A tool for obtaining maximally-localised Wannier functions. Computer physics communications 2008, 178, 685–699, DOI: 10.1016/j.cpc.2007.11.016.
- [42]Salpeter, E. E.; Bethe, H. A. A Relativistic Equation for Bound-State Problems. Phys. Rev. 1951, 84, 1232–1242, DOI: 10.1103/PhysRev.84.1232.DOI
- [43]Dias, A. C.; Bragança, H.; de Mendonça, J. P. A.; Da Silva, J. L. F. Excitonic Effects on Two-Dimensional Transition-Metal Dichalcogenide Monolayers: Impact on Solar Cell Efficiency. ACS Applied Energy Materials 2021, 4, 3265–3278, DOI: 10.1021/acsaem.0c03039.DOI
- [44]Rozzi, C. A.; Varsano, D.; Marini, A.; Gross, E. K. U.; Rubio, A. Exact Coulomb cutoff technique for supercell calculations. Physical Review B 2006, 73, DOI: 10.1103/physrevb.73.205119.DOI
- [45]Moujaes, E. A.; Diery, W. Optical properties and stability of new two-dimensional allotropes of PdS2, PdSe2 and PdSSe monolayers. Physica E: Low-dimensional Systems and Nanostructures 2021, 128, 114611, DOI: 10.1016/j.physe.2020.114611.DOI