betaFeedback

WorksPhysics and Astronomy

Enhanced production of 60Fe in massive stars

Abstract

Massive stars are a major source of chemical elements in the cosmos, ejecting freshly produced nuclei through winds and core-collapse supernova explosions into the interstellar medium. Among the material ejected, long lived radioisotopes, such as 60Fe (iron) and 26Al (aluminum), offer unique signs of active nucleosynthesis in our galaxy. There is a long-standing discrepancy between the observed 60Fe/26Al ratio by γ-ray telescopes and predictions from supernova models. This discrepancy has been attributed to uncertainties in the nuclear reaction networks producing 60Fe, and one reaction in particular, the neutron-capture on 59Fe. Here we present experimental results that provide a strong constraint on this reaction. We use these results to show that the production of 60Fe in massive stars is higher than previously thought, further increasing the discrepancy between observed and predicted 60Fe/26Al ratios. The persisting discrepancy can therefore not be attributed to nuclear uncertainties, and points to issues in massive-star models.

Introduction

Unique signatures of supernova explosions can come from long-lived radioisotopes (with half-lives of the order of a million years). These freshly synthesized isotopes are ejected by the supernova and live long enough to either travel all the way to the solar system or emit radiation that does. Two such radioisotopes are 60^{60}Fe and 26^{26}Al with half-lives on the order of a million years. They have been detected in a number of Earth and space-based measurements: presolar stardust grains[1], cosmic rays[2, 3], γ\gamma-ray measurements of radioactivities in the galaxy[4, 5, 6, 7, 8, 9, 10], material deposited in deep-ocean crusts[11, 12, 13, 14, 15, 16, 17, 18] and on the surface of the moon[19], indirect signatures in meteorites of their presence during the formation of the solar system[20, 21], and more. In addition to individual detections, the 60Fe/26Al{}^{60}\mathrm{Fe}/{}^{26}\mathrm{Al} ratio has been identified as an excellent probe to study nucleosynthesis in massive stars[10, 22]. This ratio, extracted from γ\gamma-ray observations, can constrain stellar mixing processes and rotation associated with slow neutron capture process nucleosynthesis, as well as explodability of supernova models[10]. The latter impacts predictions of the neutron star and black hole mass distributions probed by gravitational waves. The ratio has also been used as a constraint in the study of the origin of the solar system, its possible pollution by a nearby supernova[10], and its place and evolution within the local super bubble[23]. While accurate measurements of this ratio exist in the Galaxy and the early solar system[9], models tend to strongly overestimate it[22, 24] and this discrepancy has been an unresolved mystery for several decades.

Both isotopes are predominantly produced in massive stars[10, 22, 24, 25], with small contributions from other sites such as novae, asymptotic giant branch (AGB) stars, type Ia supernovae, and electron capture supernova[26, 27, 28]. However, the two isotopes are synthesized in different parts of the massive star. While both are produced in the inner layers of the star, which are only ejected during the supernova explosion, 26Al{}^{26}\mathrm{Al} is also produced in H-burning in the outer layers of the star. H-burning material can be ejected earlier due to stellar winds, which adds to the 26Al{}^{26}\mathrm{Al} yield. For these reasons, the 60Fe/26Al{}^{60}\mathrm{Fe}/{}^{26}\mathrm{Al} ratio is a powerful tool for understanding the evolution and explosion of massive stars: if both isotopes are produced by the same source(s), then the source distance, location and number cancel out, giving direct access to the stellar yield ratio right after the supernova explosion[10]. The same arguments could be applied to other ratios of supernova products, however, what makes the 60Fe/26Al{}^{60}\mathrm{Fe}/{}^{26}\mathrm{Al} ratio unique is the fact that it involves isotopes and not elements. Ratios of elements would have contributions from multiple stellar processes, while the 60Fe/26Al{}^{60}\mathrm{Fe}/{}^{26}\mathrm{Al} ratio provides a direct connection to the evolution of the massive star, stellar winds and supernova explosion mechanisms. In fact, because the contributions of the two isotopes come from different parts of the star, a robust model that can match the 60Fe/26Al{}^{60}\mathrm{Fe}/{}^{26}\mathrm{Al} ratio indicates a good description of the stellar environment across a wide range of stellar material, which would be a significant accomplishment for the field.

The importance of the 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio has been discussed extensively in the literature. For example, parameters such as stellar rotation and explodability (the ability of the star to undergo explosion) have been shown to impact the final 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio values[29, 10]. In these studies, a common theme appears in the discussion of model uncertainties, namely the uncertain nuclear reaction networks that produce/destroy the two relevant isotopes[22, 24, 30, 31, 10]. The nuclear reaction uncertainties related to the synthesis of 26Al^{26}\mathrm{Al} are less extensive and were discussed in detail by Diehl et al.[10].

The nuclear reaction network that produces 60Fe^{60}\mathrm{Fe} is relatively small (Figure 1(a) inset). It consists of a series of neutron-capture reactions starting at the stable isotope 58Fe^{58}\mathrm{Fe}, which compete with either β\beta decays or (p,n) reactions, depending on the astrophysical conditions[31]. In addition, the 22Ne(α,n)25Mg^{22}\mathrm{Ne}(\alpha,\mathrm{n})^{25}\mathrm{Mg} reaction is the dominant source of neutrons in massive stars[32]. Most reactions are well constrained as discussed in the recent review by Diehl et al.[10]. The most impactful and simultaneously most uncertain reaction in this network is the 59Fe(n,γ)60Fe^{59}\mathrm{Fe}(\mathrm{n},\gamma)^{60}\mathrm{Fe} reaction. This reaction is the dominant 60Fe^{60}\mathrm{Fe} production mechanism, and the 60Fe^{60}\mathrm{Fe} yield was shown to scale linearly with the reaction cross section[30]. It is challenging to measure this neutron-capture directly in the lab due to the short half-life of the target nucleus 59Fe^{59}\mathrm{Fe} (44 days)[33]. Therefore, indirect techniques have been used in the past to provide experimental constraints[34, 35]. Each of the previously used techniques has its own limitations and uncertainties, however, they both have a common blind spot, namely the low-energy behavior of the γ\gamma-ray strength function (gSF).

Experimental results

Figure 1. Experimental results. (a) Maxwellian Averaged Cross Section (MACS) of the 59Fe(n,γ)60Fe{}^{59}\mathrm{Fe}(\mathrm{n},\gamma){}^{60}\mathrm{Fe} reaction as a function of neutron energy. The hatched and light-green bands represent previous results from Uberseder et al.[34] and Yan et al.[35]. The default MACS used in astrophysical calculations from the non-smoker reaction code is shown as a dashed blue line. The results of the present work are represented by the purple band. For comparison purposes, the lower limit of our results without including the low-energy enhancement in the gSF is shown as a solid purple line. (a) inset: reaction network for the production/destruction of 60Fe{}^{60}\mathrm{Fe} in a massive star. (b) γ\gamma-ray strength function showing the presence of a low-energy enhancement in 60Fe{}^{60}\mathrm{Fe}, compared to 56Fe{}^{56}\mathrm{Fe} from previous works[38, 39]. The vertical lines crossing each data point represent the uncertainties of the measurements (statistical and systematic).

The gSF represents the reduced probability of the nucleus to emit a γ\gamma ray of certain energy and multipolarity[36]. It is one of the most essential quantities used in calculating neutron-capture reaction cross sections of heavy nuclei[37]. The gSF has been studied for many decades, both experimentally and theoretically, mostly for stable isotopes. During the last decade, measurements of the gSF at low energies revealed a new phenomenon[38], the so-called “low-energy enhancement” or “upbend”. The low-energy enhancement was shown to have a dipole character[39], but it is still unclear whether it is of electric (E1) or magnetic (M1) nature[40, 41]. Theoretical and experimental investigations show a dependence of the low-energy enhancement on the underlying nuclear structure[41, 42], becoming more significant near closed nuclear shells and gradually being reduced in more deformed nuclei. The impact of the low-energy enhancement on neutron-capture reactions was also investigated[43], however its effects vary strongly from reaction to reaction.

Here we present an experimental investigation of the gSF in 60Fe{}^{60}\mathrm{Fe} and its impact on the 59Fe(n,γ)60Fe{}^{59}\mathrm{Fe}(\mathrm{n},\gamma){}^{60}\mathrm{Fe} reaction cross section. With our measurement we show that the reaction cross section is significantly higher than previously thought, which leads to the conclusion of an enhanced 60Fe{}^{60}\mathrm{Fe} production in massive stars. Our result shows that the discrepancy between models and observations in the 60Fe/26Al{}^{60}\mathrm{Fe}/{}^{26}\mathrm{Al} ratio persists despite the stronger nuclear physics constraints.

Results

We performed an experiment to investigate the gSF in 60Fe{}^{60}\mathrm{Fe}, especially at low energies using the β\beta-Oslo method[44, 45] (see Methods section). The resulting gSF is shown in Figure 1b (red squares) together with the extrapolation of the previous 60Fe{}^{60}\mathrm{Fe} study[34] (solid black line) and two measurements of the 56Fe{}^{56}\mathrm{Fe} isotope for comparison[38, 39]. It can be seen that similar to 56Fe{}^{56}\mathrm{Fe}, our results show the presence of a significant low-energy enhancement. This, in turn, results in a significant increase of the 59Fe(n,γ)60Fe{}^{59}\mathrm{Fe}(\mathrm{n},\gamma){}^{60}\mathrm{Fe} reaction Maxwellian Averaged Cross Section (MACS) (Figure 1a) compared to the previous measurements[34, 35] and compared to the recommended theoretical calculations (non-smoker)[46] used in astrophysical models. More specifically, our lower and upper limits are factors of 1.6 and 2.1 higher than the recommended value. As a consistency check, we performed the MACS calculation removing the low-energy enhancement from our gSF (Figure 1a, purple solid line) and keeping all other parameters the same. This calculation enables a more comparison with the Uberseder et al. measurement. Although other parameters, like the NLD, are not identical, it can be seen in Figure 1a that by removing the low-energy enhancement the two measurements are consistent. The main difference between our result and the one from Uberseder et al. comes from the fact that the latter measurement was not sensitive to the presence of the low-energy enhancement. The study by Yan et al.[35] also measured at higher energies and used theoretical models to extrapolate to the astrophysically relevant energy. In their gSF extrapolation they also assumed no low-energy enhancement, which could explain the lower cross section compared to the present work.

Discussion

To investigate the impact of the new 59Fe(n,γ)60Fe{}^{59}\mathrm{Fe}(\mathrm{n},\gamma){}^{60}\mathrm{Fe} reaction cross section on the production of 60Fe{}^{60}\mathrm{Fe} we ran astrophysical calculations using the lower and upper limits of the new rate (Figure 2). We evolved solar metallicity stellar models with initial zero-age main-sequence mass of 15, 20, and 25M⊙M_\odot using the one-dimensional stellar evolution toolkit, Modules for Experiments in Stellar Astrophysics (MESA)[47, 48]. For comparison, we also evolved a baseline model using the default choice of the 59Fe(n,γ)60Fe{}^{59}\mathrm{Fe}(\mathrm{n},\gamma){}^{60}\mathrm{Fe} reaction rate in MESA adopted from Rauscher & Thielemann[46] using the non-smoker Hauser-Feshbach model. Figure 2 shows the mass fraction profiles from the resulting 15M⊙M_\odot and 20M⊙M_\odot MESA stellar models as a function of Lagrangian mass coordinate for 60Fe{}^{60}\mathrm{Fe} at the pre-supernova stage (at the start of iron corecollapse). In agreement with Jones et al.[30] we find that the dominant pre-supernova regions for 60Fe^{60}\mathrm{Fe} production is primarily in the He-, C-, and Ne-burning shell regions. The results from the 25M⊙25M_{\odot} model are very similar.

Image not extracted

Figure 2. 60Fe^{60}\mathrm{Fe} production in massive star simulations. (a) Calculation of a 15M⊙15M_{\odot} star, and (b) of a 20M⊙20M_{\odot} star. The green solid line represents calculations done using the default MACS for the 59Fe(n,γ)60Fe^{59}\mathrm{Fe}(\mathrm{n},\gamma)^{60}\mathrm{Fe} reaction[46], while the blue dot-dashed and yellow dashed lines show the results using the upper and lower limits from the present work.

As shown in Figure 2, in agreement with previous studies[30], the production of 60Fe^{60}\mathrm{Fe} both during the massive star evolution and during the supernova depends strongly on the 59Fe(n,γ)60Fe^{59}\mathrm{Fe}(\mathrm{n},\gamma)^{60}\mathrm{Fe} reaction rate. In addition, based on the study by Jones et al.[30], the increase in the 59Fe(n,γ)60Fe^{59}\mathrm{Fe}(\mathrm{n},\gamma)^{60}\mathrm{Fe} reaction rate is expected to propagate throughout the stellar evolution and supernova explosion, and impact the final ejected 60Fe^{60}\mathrm{Fe} yield. Such a significant increase in the production and ejection of 60Fe^{60}\mathrm{Fe} in massive stars has crucial implications in the interpretation of the different observations of 60Fe^{60}\mathrm{Fe} mentioned earlier, such as in ocean sediments, the surface of the moon, stardust and cosmic rays. Here we focus on the impact on the 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio.

The presently accepted value of the 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio within the galaxy, based on γ\gamma-ray observations[9], is 0.184±0.0420.184 \pm0.042. Astrophysical calculations predict a wide range of values for this ratio. Most massive star models[22, 24, 10] tend to overpredict this ratio by approximately a factor of 3-10. The disagreement between models and observations is often attributed to uncertain nuclear physics input in the models[9, 22]. A recent investigation of the 59Fe^{59}\mathrm{Fe} β\beta-decay rate in stellar environments indicated a reduction in the 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio, bringing the models closer to the observations[31]. However, our results point to an increased production of 60Fe^{60}\mathrm{Fe}, resulting in a higher value of the 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio in models. The firmer constraints on the nuclear reaction network from the present work show that a nuclear solution to this problem is unlikely. This suggests that the solution to the puzzle should come from the description of the astrophysical environment and processes that affect the two isotopes.

The importance of 60Fe^{60}\mathrm{Fe} and 26Al^{26}\mathrm{Al} can further be highlighted when considering that they are produced in different parts of the massive star. The yield of 26Al^{26}\mathrm{Al} in stellar winds was shown to be affected by the mass of the star, the stellar rotation, and the presence of a companion[49, 10]. On the other hand, since 60Fe^{60}\mathrm{Fe} is ejected only by the supernova, its yield is intricately connected to the explodability of the star, which in turn is connected to black hole formation mass distribution. If a massive star does not explode, then the contribution to 60Fe^{60}\mathrm{Fe} is practically zero. Supernova studies exhibit large variation in stellar explodability, which result in significant variation of the 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio[24, 29]. For example, Pleintinger et al.[29] found that the 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio is significantly reduced in the case where no supernova exploded, thus no material ejection, above 25M⊙25M_{\odot}[50]. Limongi and Chiefi[24] also showed that for some of their models the 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio decreased for lower mass limits. Therefore, the increased production of 60Fe^{60}\mathrm{Fe} found in the present work can be balanced by assuming a lower mass limit for supernova explosions in the models.

A second stellar parameter found to affect the 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio significantly is stellar rotation. Increased stellar rotation was found to increase 26Al^{26}\mathrm{Al} yields due to increased mass loss[50]. However, stellar rotation was shown to have an even larger impact on 60Fe^{60}\mathrm{Fe} yields. This is because stellar rotation causes an enlarged C-burning shell, which in turn increases neutron production[10]. Since neutron-capture reactions are the dominant mechanism of producing 60Fe^{60}\mathrm{Fe}, stellar rotation causes an increase in 60Fe^{60}\mathrm{Fe} yield, larger than the increase found for 26Al^{26}\mathrm{Al}. As a result, the calculated 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio when including stellar rotation is higher than for non-rotating stars[29]. Therefore, the increased 60Fe^{60}\mathrm{Fe} production found in the present work, which causes an even higher 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio than previously predicted, cannot be explained by introducing stellar rotation to the models.

Additional stellar parameters can affect the 60Fe/26Al^{60}\mathrm{Fe}/^{26}\mathrm{Al} ratio and further investigations are needed to shed light on this puzzle. One example that was shown to have a significant impact is the explosion energy[40]. Jones et al.[40] showed that the dependence of the 60Fe/{}^{60}\mathrm{Fe}/{}^{26}\mathrm{Al}$ is different for 15, 20 or 25M⊙25M_{\odot} stars, therefore additional studies are needed to understand the impact in the overall 60Fe/{}^{60}\mathrm{Fe}/{}^{26}\mathrm{Al}$ ratio.

In the present work we investigated the production of 60Fe{}^{60}\mathrm{Fe} in massive stars. Our results provide the most complete estimate of the 59Fe(n,γ)60Fe{}^{59}\mathrm{Fe}(\mathrm{n},\gamma){}^{60}\mathrm{Fe} reaction, including the low-energy enhancement in the γ\gamma-ray strength function. We found a higher reaction rate compared to previous measurements and the recommended theoretical value used in astrophysical models. The increase in the reaction rate resulted in an increase in the production of 60Fe{}^{60}\mathrm{Fe} in massive stars by almost a factor of 2. We investigated the impact of our results on the 60Fe/{}^{60}\mathrm{Fe}/{}^{26}\mathrm{Al} ratio, which was identified as a sensitive probe for exploring stellar evolution and supernova dynamics. Before our measurement, the discrepancy between observations and theoretical models in the value of the {}^{60}\mathrm{Fe}/26Al{}^{26}\mathrm{Al} ratio was attributed to uncertain nuclear physics. While uncertainties in the nuclear physics aspects still remain, our result removes one of the most significant uncertainties in the 60Fe{}^{60}\mathrm{Fe} production. However, the discrepancy persists and is even larger. The solution to the puzzle must come from the stellar modeling by, for example, reducing stellar rotation, assuming smaller explodability mass limits for massive stars, or modifying other stellar parameters.

Methods

The goal of the experiment was to constrain the 59Fe(n,γ)60Fe{}^{59}\mathrm{Fe}(\mathrm{n},\gamma){}^{60}\mathrm{Fe} reaction. In the absence of a direct measurement, experimental techniques focus on constraining the nuclear properties used by theory to calculate the reaction cross section using the Hauser-Feshbach statistical model[52]. These properties are the neutron-nucleus optical model potential (a description of the interaction between the neutron and the nucleus), the nuclear level density - NLD (the number of energy levels per unit energy as a function of excitation energy, spin and parity), and the γ\gamma-ray strength function - gSF (the probability to emit a γ\gamma ray of a particular energy and multipolarity). For a recent review of indirect neutron capture constraints for astrophysical processes the reader is referred to Larsen et al.[37]. For neutron capture reactions near the valley of stability the optical model potential is relatively well constrained[52, 53]. The other two quantities, however, namely the NLD and gSF are significantly more uncertain, reaching up to two orders of magnitude variation in their theoretical prediction[45]. Here we focus on constraining the NLD and gSF for 60Fe{}^{60}\mathrm{Fe} and in this way constrain the 59Fe(n,γ)60Fe{}^{59}\mathrm{Fe}(\mathrm{n},\gamma){}^{60}\mathrm{Fe} reaction cross section.

In the present work we used a 60Mn{}^{60}\mathrm{Mn} radioactive beam to populate excited states in 60Fe{}^{60}\mathrm{Fe} via β\beta decay and extract its NLD and gSF. To do this we applied the β\beta-Oslo method[44, 45], a variation of the traditional Oslo method[54, 55, 56], which extracts the NLD and gSF in nuclei populated using various nuclear reactions. The β\beta-Oslo method populates the nucleus of interest using β\beta decay, which was introduced ten years ago for constraining neutron-capture reactions on nuclei far from stability. Here, we use the β\beta-Oslo method to extract the NLD and gSF of 60Fe{}^{60}\mathrm{Fe} and constrain the cross section of the 59Fe(n,γ)60Fe{}^{59}\mathrm{Fe}(n,\gamma){}^{60}\mathrm{Fe} reaction.

The experiment took place at the National Superconducting Cyclotron Laboratory at Michigan State University. A 64Ni{}^{64}\mathrm{Ni} primary beam was accelerated through the Coupled Cyclotron Facility to an energy of 140 MeV/u and impinged on a 510 mg/cm2^{2} thick Be target. The produced cocktail beam centered around 60Mn{}^{60}\mathrm{Mn} was separated using the A1900 fragment separator[57] and delivered to the gas stopping facility[58], where it was slowed down and purified. A pure 60Mn{}^{60}\mathrm{Mn} beam at an energy of 30 keV was implanted into a Si surface barrier detector. The 60Mn{}^{60}\mathrm{Mn} beam consisted of 59(1)% ground state (Jπ=1+J^\pi=1^+, T1/2=0.28T_{1/2}=0.28 s) and 41(1)% isomeric state (Jπ=4+J^\pi=4^+, T1/2=1.77T_{1/2}=1.77 s)[59]. The identification of the two different states was done based on unique γ\gamma-ray signatures and their different half-lives. Both states β\beta decay into different excited states of 60Fe{}^{60}\mathrm{Fe}, and the 1+1^+ state also decays directly to its ground state.

The β\beta-decay electrons were detected in the Si detector, and the emitted γ\gamma rays were detected in the Summing NaI(Tl) (SuN) detector[60]. SuN is a cylindrical total absorption spectrometer segmented into eight optically isolated segments. The total energy deposited in SuN (recorded as the event-by-event sum of all segments) provides the excitation energy, ExE_{\mathrm{x}}, of 60Fe{}^{60}\mathrm{Fe} populated in each β\beta decay. The individual segments are sensitive to the energy of the individual γ\gamma rays, EγE_{\gamma}, emitted during the deexcitation of each ExE_{\mathrm{x}}. For our analysis we use a two-dimensional (2D) matrix of ExE_{\mathrm{x}} vs EγE_{\gamma}, which includes all γ\gamma rays detected in our experiment following the β\beta decay of 60Mn{}^{60}\mathrm{Mn} into 60Fe{}^{60}\mathrm{Fe} (Fig. 3). The matrix in Fig. 3a shows strong population of discrete states up to Ex=3E_{\mathrm{x}}=3 MeV. This region was not included in our analysis to avoid strong transitions between discrete levels as the method is not valid for non-statistical γ\gamma decay.

The starting point for the β\beta-Oslo method analysis was the 2D γ\gamma-ray matrix mentioned earlier (ExE_{\mathrm{x}} vs EγE_{\gamma}). The matrix was first unfolded with the response of the SuN detector[55], and then, following an iterative subtraction process[54], the primary γ\gamma-ray distribution was extracted. Primary γ\gamma rays are the first γ\gamma rays emitted in the deexcitation of an ExE_{\mathrm{x}} bin, and their distribution depends on the functional form of the NLD and gSF[56]. The final step in this analysis was the normalization of the NLD and gSF using external information in order to extract absolute values for these quantities. Here we used the broad range of known discrete levels, up to ≈4.0\approx4.0 MeV (Fig. 3) to normalize our NLD, which allowed us to fix the slope both for the NLD and the gSF. Because the 60Mn{}^{60}\mathrm{Mn} beam consisted of both the 1+1^{+} ground state and the 4+4^{+} isomeric state, the populated NLD corresponded to a broad spin distribution. Assuming allowed β\beta decays from the two initial spins, followed by dipole γ\gamma-ray emission, we expect to populate states in 60Fe{}^{60}\mathrm{Fe} with spins 0−60-6 of both parities. This range overlaps completely with the spin range expected to be populated in the neutron-capture on the 3/2−3/2^{-} ground state of 59Fe{}^{59}\mathrm{Fe}. It should be noted that the 1+1^{+} ground state of 60Mn{}^{60}\mathrm{Mn} feeds the 60Fe{}^{60}\mathrm{Fe} ground state with a significant probability. High energy electrons from this gs-gs decay create background in the SuN detector and for this reason the primary γ\gamma-ray component that feeds the 60Fe{}^{60}\mathrm{Fe} ground state was excluded from the analysis.

The resulting NLD is shown in Fig. 3b (red squares) together with the known discrete levels (black solid line). For comparison, three commonly used theoretical NLD models are shown as well. The Back Shifted Fermi Gas (BSFG) is a phenomenological model often used in global NLD calculations[61]. The BSFG model seems to be in reasonable agreement with the experimental results in the statistical region. Other commonly used models are two semimicroscopic models[62, 63], which are normalized to experimental NLD data where available, or to known discrete levels. In Fig. 3b the model labeled “Demetriou 2001”[62] uses the Hartree-Fock-Bogoliubov plus Bardeen–Cooper–Schrieffer approach in a parity-independent way. The second model[63] was adopted by the RIPL3 library[64] (and is therefore labeled as such) and it uses a Hartree-Fock-Bogoliubov plus combinatorial approach. In Fig. 3a we show an optimized normalization of the RIPL3 model, which matches the experimental data. Similar discrepancies from the adopted normalization used in RIPL3 have been observed in other nuclei previously[65]. Since the experimental data do not extend all the way to the neutron-separation energy (Sn=8.8S_\mathrm{n}=8.8 MeV), all three models shown in Fig. 3 were used to extract the 59Fe(n,γ)60Fe{}^{59}\mathrm{Fe}(\mathrm{n},\gamma){}^{60}\mathrm{Fe} reaction cross section and the results were included in the uncertainty band shown in Figure 1a.

Fixing the NLD slope allowed for the gSF slope to also be fixed, since in the Oslo method the slopes of the two quantities are directly linked. The final step in our analysis was the absolute normalization of the gSF. This normalization was taken from Uberseder et al.[34] in the energy region between 5.4 and 6.5 MeV. The resulting gSF is shown in Fig. 1b of the main article.

Image not extracted

Figure 3. Raw experimental data and NLD for 60Fe^{60}\mathrm{Fe}. (a) Two dimensional raw matrix showing the γ\gamma-ray detection from the β\beta decay of 60Mn^{60}\mathrm{Mn} into 60Fe^{60}\mathrm{Fe}. (b) NLD of 60Fe^{60}\mathrm{Fe} extracted in the present work (red squares) compared to the known discrete levels and theoretical calculations. Vertical lines crossing each of the red squares represent the statistical uncertainties of the present measurement. RIPL3 (grey dashed line) refers to the recommended NLD from the RIPL3 library[64]. RIPL3 corrected (dashed red line) corresponds to the recommended NLD, adjusted to match the experimental data. The blue dotted line corresponds to the NLD calculated using the Back Shifted Fermi Gas model (BSFG)[61], while the cyan dot-dashed line shows the NLD calculated by Demetriou et al.[62].

The extracted NLD and gSF were used as input in the TALYS1.95 statistical model code[66] in order to extract the Maxwellian Averaged Cross Section (MACS). The MACS results are shown in Fig. 1a of the main article. The uncertainty band includes analysis and statistical uncertainties, as well as uncertainties from the NLD extrapolation mentioned above and the gSF normalization. The final MACS results for the relevant temperatures are shown in Table 1, while the final reaction rates are shown in Table 2.

kTkT (keV)80859095100
Upper limit (mb)24.023.122.221.420.8
Lower limit (mb)18.317.516.916.315.8

Table 1. MACS upper and lower limits at relevant temperatures

Data Availability

The data sets generated during and/or analyzed during the current study are available from the corresponding author on request. Source data are provided with this paper in the Source Data file. The two dimensional matrix produced and used in this work (Fig. 3a) has been deposited in the Zenodo database, under accession code https://doi.org/10.5281/zenodo.13785761. The recommended reaction rate can be found at https://doi.org/10.5281/zenodo.13799739.

Code Availability

The codes used for the analysis of the present data are publicly available on github: https://github.com/oslocyclotronlab/oslo-method-software. The astrophysical calculations were performed with MESA which is an open-source code: https://docs.mesastar.org/en/24.08.1/. The theoretical calculations for the reaction rate extraction were performed with the open-source code TALYS: https://nds.iaea.org/talys/.

Acknowledgments

The research was supported by Michigan State University, the National Superconducting Cyclotron Laboratory and the Facility for Rare Isotope Beams. The work was supported by the National Science Foundation under grants PHY 1913554, PHY 2209429 (A.Sp., H.S., A.P.K., K.H., A.D.), PHY 1565546 (A.Sp., S.N.L., H.S., C.S.), PHY-1848177 (CAREER) (A.Sp.), and PHY 1613188 (PDY). A.C., S.M., C. F., P.G. and C.P. were supported by the U.S. Department of Energy through the Los Alamos National Laboratory. Los Alamos National Laboratory is operated by Triad National Security, LLC, for the National Nuclear Security Administration of U.S. Department of Energy (Contract No. 89233218CNA000001). Research presented in this article was supported by the Laboratory Directed Research and Development program of Los Alamos National Laboratory under project numbers 20160173ER and 20210808PRD1(C.F.). This material is based upon work supported in part by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under Contracts No. DE-SC0020451(S.N.L.) and DE-SC0023633 (S.N.L.), DE-SC0014285 (P.G.) and the National Nuclear Security Administration under Award No. DE-NA0003180 (B.P.C., K.C.) and the Stewardship Science Academic Alliances program through DOE Awards No DOE-DE-NA0003906 (D.R., R.L.). his work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344 (A.Sw.). A.C.L gratefully acknowledges funding by the European Research Council through ERC-STG-2014 under Grant Agreement No. 637686, from the Research Council of Norway grant number 316116, and the Norwegian Nuclear Center (project number 341985). A.C.L and J.E.M. gratefully acknowledges financial support by the Fulbright Program, which is sponsored by the U.S. Department of State and the U.S.-Norway Fulbright Foundation. S. L. was supported by the Laboratory Directed Research and Development Program at Pacific Northwest National Laboratory operated by Battelle for the U.S. Department of Energy.

Author Contributions Statement

A. Spyrou prepared the proposal, ran the experiment, supervised the whole analysis and also performed parts of the analysis, lead the interpretation and prepared the manuscript. D.R. ran the experiment and performed the majority of the analysis. A.C. prepared the proposal and manuscript, and participated in the experiment, analysis and interpretation. C.F. and K.H. performed astrophysical calculations and contributed to the interpretation and manuscript preparation. S.N.L. prepared the proposal and manuscript, and participated in the experiment, analysis and interpretation. D.M. and H.S. contributed to the interpretation of the results. K.C., B.C., P.D., A.C.D., P.G., M.G., A.C.L., R.L., S.L., J.M., S.M., F.N., A.P.K., G.P., C.P., M.K.S., C.S. and A. Sweet participated in the experiment preparation and execution and contributed to the manuscript preparation.

Competing Interests Statement

The authors declare no competing interests.

Tables

T (GK)Reaction Rate (cm3 s−1 mol−1\mathrm{cm}^{3}\,\mathrm{s}^{-1}\,\mathrm{mol}^{-1})
Upper LimitLower Limit
0.18.2E+066.5E+06
0.157.5E+065.9E+06
0.27.1E+065.6E+06
0.36.7E+065.3E+06
0.46.5E+065.0E+06
0.56.3E+064.9E+06
0.66.1E+064.7E+06
0.76.0E+064.6E+06
0.85.9E+064.5E+06
0.95.7E+064.4E+06
15.6E+064.3E+06

Table 2. Reaction rate upper and lower limits as a function of temperature.

Figure Captions

Fig. 1: (a) Maxwellian Averaged Cross Section (MACS) of the 59Fe(n,γ)60Fe{}^{59}\mathrm{Fe}(n,\gamma){}^{60}\mathrm{Fe} reaction as a function of neutron energy. The hatched and light-green bands represent previous results from Uberseder et al.[34] and Yan et al.[35]. The default MACS used in astrophysical calculations from the non-smoker reaction code is shown as a dashed blue line. The results of the present work are represented by the purple band. For comparison purposes, the lower limit of our results without including the low-energy enhancement in the gSF is shown as a solid purple line. (a) inset: reaction network for the production/destruction of 60Fe{}^{60}\mathrm{Fe} in a massive star. (b) γ\gamma-ray strength function showing the presence of a low-energy enhancement in 60Fe{}^{60}\mathrm{Fe}, compared to 56Fe{}^{56}\mathrm{Fe} from previous works[38, 39]. The vertical lines crossing each data point represent the uncertainties of the measurements.

Fig. 2: 60Fe{}^{60}\mathrm{Fe} production in massive star simulations. (a) Calculation of a 15M⊙15M_{\odot} star, and (b) of a 20M⊙20M_{\odot} star. The green solid line represents calculations done using the default MACS for the 59Fe(n,γ)60Fe{}^{59}\mathrm{Fe}(n,\gamma){}^{60}\mathrm{Fe} reaction[46], while the blue dot-dashed and yellow dashed lines show the results using the upper and lower limits from the present work.

Image not extracted

Figure 3 (PDF p. 18). Raw experimental data and NLD for 60Fe{}^{60}\mathrm{Fe}. (a) Two dimensional raw matrix showing the γ\gamma-ray detection from the β\beta decay of 60Mn{}^{60}\mathrm{Mn} into 60Fe{}^{60}\mathrm{Fe}. (b) NLD of 60Fe{}^{60}\mathrm{Fe} extracted in the present work (red squares) compared to the known discrete levels and theoretical calculations. Vertical lines crossing each of the red squares represent the uncertainties of the present measurement. RIPL3 (grey dashed line) refers to the recommended NLD from the RIPL3 library[64]. RIPL3 corrected (dashed red line) corresponds to the recommended NLD, adjusted to match the experimental data. The blue dotted line corresponds to the NLD calculated using the Back Shifted Fermi Gas model (BSFG)[61], while the cyan dot-dashed line shows the NLD calculated by Demetriou et al.[62].

References

  1. [1]Groopman, E. et al. Inferred initial ²⁶Al/²⁷Al ratios in presolar stardust grains from supernovae, Astrophys. J., 809, 31 (2015).
  2. [2]Yanasak, N.E. et al. Measurement of the Secondary Radionuclides ¹⁰Be, ²⁶Al, ³⁶Cl, ⁵⁴Mn, and ¹⁴C and Implications for the Galactic Cosmic-Ray Age, Astrophys. J., 563, 768 (2001).
  3. [3]Binns, W. R. et al. Observation of the ⁶⁰Fe nucleosynthesis-clock isotope in galactic cosmic rays, Science 352, 677 (2016).DOI
  4. [4]Mahoney, W. A., Ling, J. C., Jacobson, A. S., Lingerfelter, R. E., Diffuse galactic gamma-ray line emission from nucleosynthetic ⁶⁰Fe, ²⁶Al, and ²²Na: preliminary limits from HEAO 3, Astrophys. J., 262, 742 (1982).
  5. [5]Diehl, R. et al. COMPTEL observations of galactic ²⁶Al, A&A, 298, 445 (1995).
  6. [6]Prantzos, N. and Diehl, R. Radioactive ²⁶Al in the galaxy: observations versus theory, Ph. Rep. 267, 1 (1996).DOI
  7. [7]Diehl, R. et al. Radioactive ²⁶Al from massive stars in the galaxy, Nature, 439, 45 (2006).pubmed.ncbi.nlm.nih.gov/16397491
  8. [8]Wang,W. et al. SPI observations of the diffuse ⁶⁰Fe emission in the Galaxy, A&A, 469, 1005 (2007).DOI
  9. [9]Wang, W. et al. Gamma-Ray Emission of ⁶⁰Fe and ²⁶Al Radioactivity in Our Galaxy, Astrophys. J. 889, 169 (2020).DOI
  10. [10]Diehl, R. et al The Radioactive Nuclei ²⁶Al and ⁶⁰Fe in the Cosmos and in the Solar System, Publications of the Astronomical Society of Australia 38, e062 (2021).
  11. [11]Knie, K. et al. Indication for supernova produced ⁶⁰Fe activity on earth, Phys. Rev. Lett. 83, 18–21 (1999).DOI
  12. [12]Knie, K. et al. ⁶⁰Fe anomaly in a deep-sea manganese crust and implications for a nearby supernova source, Phys. Rev. Lett. 93, 171103 (2004).pubmed.ncbi.nlm.nih.gov/15525065
  13. [13]Fitoussi C. et al. Search for Supernova-Produced ⁶⁰Fe in a Marine Sediment, Phys. Rev. Lett. 101, 121101 (2008).DOI
  14. [14]Wallner, A. et al. Recent near-Earth supernovae probed by global deposition of interstellar radioactive ⁶⁰Fe, Nature 532, 69 (2016).DOI
  15. [15]Ludwig, P. et al. Time-resolved 2-million-year-old supernova activity discovered in Earth’s microfossil record, Proc. Natl. Acad. Sci. 113, 9232 (2016).DOI
  16. [16]Fry, B. J., Fields, B. D., Ellis, J. R., Radioactive iron rain: Transporting ⁶⁰Fe in SN dust to the ocean floor. Astrophys. J. 827, 48 (2016).DOI
  17. [17]Koll, D. et al. Interstellar ⁶⁰Fe in Antarctica, Phys. Rev. Lett. 123, 072701 (2019).
  18. [18]Wallner, A. et al. ⁶⁰Fe and ²⁴⁴Pu deposited on Earth constrain the r-process yields of recent nearby supernovae, Science, 372, 742 (2021).DOI
  19. [19]FImianiet, L. et al. Interstellar ⁶⁰Fe on the surface of the moon. Phys. Rev. Lett. 116, 151104 (2016).DOI
  20. [20]Baker, J., Bizzarro, M., Wittig, N., Connelly, J., Haack, H. Early planetesimal melting from an age of 4.5662 Gyr for differentiated meteorites, Nature, 436, 1127 (2005).pubmed.ncbi.nlm.nih.gov/16121173
  21. [21]Trappitsch, R. et al. New Constraints on the Abundance of ⁶⁰Fe in the Early Solar System, Astrophys. J. Lett., 857, L15 (2018).DOI
  22. [22]Woosley, S. E. and Heger, A. Nucleosynthesis and remnants in massive stars of solar metallicity, Phys. Rep. 442, 269 (2007).DOI
  23. [23]Schulreich, M.M., Feige, J., Breitschwerdt, D. Numerical studies on the link between radioisotopic signatures on Earth and the formation of the Local Bubble, A&A 680, A39 (2023).
  24. [24]Limongi, M. and Chieffi, A., The Nucleosynthesis of ²⁶Al and ⁶⁰Fe in Solar Metallicity Stars Extending in Mass from 11 to 120 Msolar: The Hydrostatic and Explosive Contributions, Astrophys. J. 647, 483 (2006).
  25. [25]Timmes, F.X. et al. ²⁶Al and ⁶⁰Fe from supernova explosions, Astrophys. J. 449, 204 (1995).DOI
  26. [26]Lugaro, M., Ott, U. and Kereszturi, Á. Radioactive nuclei from cosmochronology to habitability, Prog. Part. Nucl. Phys. 102, 1 (2018).DOI
  27. [27]Wanajo, S., Janka, H.-T., and Müller, B. Electron-capture supernovae as sources of ⁶⁰Fe, Astrophys. J. 774, L6 (2013).DOI
  28. [28]Nomoto, N. and Leung, S.-C. Single Degenerate Models for Type Ia Supernovae Progenitor's Evolution and Nucleosynthesis Yields, Space Sci. Rev. 214, 67 (2018).DOI
  29. [29]Pleintinger, M.M.M., Star Groups and their Nucleosynthesis, Ph.D. thesis, Technical University of Munich (2020).
  30. [30]Jones, M.D., et al. Examination of the low-energy enhancement of the γ-ray strength function of ⁵⁶Fe, Phys. Rev. C 97, 024327 (2018).
  31. [31]Gao, B. et al. New ⁵⁹Fe Stellar Decay Rate with Implications for the ⁶⁰Fe Radioactivity in Massive Stars, Phys. Rev. Lett. 126, 152701 (2021).DOI
  32. [32]Ota, S. et al. Decay properties of ²²Ne + α resonances and their impact on s-process nucleosynthesis, Phys. Lett. B 802, 135256 (2020).DOI
  33. [33]Couture, A. and Reifarth, R. Direct measurements of neutron capture on radioactive isotopes, At. Data Nucl. Data Tables 93, 807 (2007).DOI
  34. [34]Uberseder, E. et al. First Experimental Constraint on the ⁵⁹Fe(n,γ)⁶⁰Fe Reaction Cross Section at Astrophysical Energies via the Coulomb Dissociation of ⁶⁰Fe, Phys. Rev. Lett. 112, 211101 (2014).DOI
  35. [35]Yan, S. Q. et al. The ⁵⁹Fe(n,γ)⁶⁰Fe Cross Section from the Surrogate Ratio Method and Its Effect on the ⁶⁰Fe Nucleosynthesis, Astrophys. J. 919, 84 (2021).DOI
  36. [36]Goriely, S. et al. Reference database for photon strength functions, Eur. Phys. J. A 55, 172 (2019).DOI
  37. [37]Larsen, A.C., Spyrou, A., Liddick, S.N., Guttormsen, M., Novel techniques for constraining neutron-capture rates relevant for r-process heavy-element nucleosynthesis, Prog. Part. Nucl. Phys. 107, 69 (2019).DOI
  38. [38]Voinov, A. et al. Large Enhancement of Radiative Strength for Soft Transitions in the Quasicontinuum, Phys. Rev. Lett. 93, 142504 (2004).pubmed.ncbi.nlm.nih.gov/15524787
  39. [39]Larsen, A.C. et al., Evidence for the Dipole Nature of the Low-Energy γ Enhancement in ⁵⁶Fe, Phys. Rev. Lett. 111, 242504 (2013).pubmed.ncbi.nlm.nih.gov/24483649
  40. [40]Jones, S. et al., ⁶⁰Fe in core-collapse supernovae and prospects for X-ray and gamma-ray detection in supernova remnants, MNRAS 485, 4287 (2019).DOI
  41. [41]Schwengner, R., Frauendorf, S. and Brown, B. A. Low-Energy Magnetic Dipole Radiation in Open-Shell Nuclei, Phys. Rev. Lett. 118, 092502 (2017).DOI
  42. [42]Guttormsen, M. et al. Evolution of the γ-ray strength function in neodymium isotopes, Phys. Rev. C 106, 034314 (2022).DOI
  43. [43]Larsen, A.C. and Goriely, S. Impact of a low-energy enhancement in the γ-ray strength function on the neutron-capture cross section, Phys. Rev. C 82, 014318 (2010).DOI
  44. [44]Spyrou, A et al. Novel technique for constraining r-process (n,γ) reaction rates, Phys. Rev. Lett. 113, 232502 (2014).pubmed.ncbi.nlm.nih.gov/25526121
  45. [45]Liddick, S.N et al. Experimental neutron capture rate far from stability, Phys. Rev. Lett. 116, 242502 (2016).DOI
  46. [46]Rauscher, T and Thielemann, F.-K Astrophysical reaction rates from statistical model calculations, At. Data Nucl. Data Tables 75, 1 (2000).DOI
  47. [47]Paxton, B. et al. Modules for Experiments in Stellar Astrophysics (MESA), Astrophys. J. S. 192, 3 (2011).
  48. [48]Jermyn, A.S. et al. Modules for Experiments in Stellar Astrophysics (MESA): Time-dependent Convection, Energy Conservation, Automatic Differentiation, and Infrastructure, Astrophys. J. S. 265, 15 (2023).DOI
  49. [49]Brinkman, H. E., den Hartogh, J. W., Doherty, C. L., Pignatari, M., Lugaro, M., ²⁶Aluminum from Massive Binary Stars. II. Rotating Single Stars Up to Core Collapse and Their Impact on the Early Solar System, Astrophys. J 884, 38 (2019).
  50. [50]Limongi, M. and Chieffi, A. Presupernova Evolution and Explosive Nucleosynthesis of Rotating Massive Stars in the Metallicity Range −3 ≤ [Fe/H] ≤ 0, Astrophys. J. S. 237, 13 (2018).DOI
  51. [52]Koning, A.J., Delaroche, J.P. Local and global nucleon optical models from 1 keV to 200 MeV, Nucl. Phys. A 713, 231 (2003).DOI
  52. [53]Hebborn, C. et al., Optical potentials for the rare-isotope beam era, J. Phys. G 50, 060501 (2023).DOI
  53. [54]Guttormsen, M., Ramsøy, T., Rekstad, J. The first generation of γ-rays from hot nuclei, Nucl. Instrum. Meth. Phys. Res. A 255, 518 (1987).DOI
  54. [55]Guttormsen, M. Tveter, T.S., Bergholt, L., Ingebretsen, F., Rekstad, J., The unfolding of continuum γ-ray spectra, Nucl. Instrum. Meth. Phys. Res. A 374, 371 (1996).DOI
  55. [56]A. Schiller, et al., Extraction of level density and γ strength function from primary γ spectra, Nucl. Instrum. Meth. Phys. Res. A 447, 498 (2000).DOI
  56. [57]D. J. Morrissey, B. Sherrill, M. Steiner, A. Stolz, and I. Wiedenhoever, Commissioning the A1900 projectile fragment separator, Nucl. Instr. Meth. B 204, 90 (2003).DOI
  57. [58]K. Cooper, K. et. al., Extraction of thermalized projectile fragments from a large volume gas cell, Nuc. Instr. and Meth. Phys. Res. A 763, 543 (2014).DOI
  58. [59]https://www.nndc.bnl.gov
  59. [60]Simon A. et al., SuN: Summing NaI(Tl)gamma-ray detector for capture reaction measurements, Nucl. Instr. Meth. Phys. Res. A 703, 16 (2013).DOI
  60. [61]von Egidy, T. and Bucurescu, D. Experimental energy-dependent nuclear spin distributions, Phys. Rev. C 80, 054310 (2009).DOI
  61. [62]Demetriou, P. and Goriely, S. Microscopic nuclear level densities for practical applications, Nucl. Phys. A 695, 95 (2001).DOI
  62. [63]Goriely, S., Hilaire, S. and Koning, A. J. Improved microscopic nuclear level densities within the Hartree-Fock-Bogoliubov plus combinatorial method, Phys. Rev. C 78, 064307 (2008).
  63. [64]Capote, R. et al. RIPL - Reference Input Parameter Library for Calculation of Nuclear Reactions and Nuclear Data Evaluations, Nucl. Data Sheets 110, 3107 (2009).DOI
  64. [65]Muecher, D. et al. Extracting model-independent nuclear level densities away from stability, Phys. Rev. C. Lett. 107, L011602 (2023).DOI
  65. [66]Koning, A., Hilaire, S. and Duijvestijn, M. C., TALYS: A nuclear reaction program, NRG Report No. 21297/04.62741/P, also available at http://www.talys.eu.

Paper details

vlnc:W_3guc4wd6
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents