betaFeedback

WorksPhysics and Astronomy

Hunting for Long-Lived ALPs in Top Events via Displaced Dielectron Pairs at the LHC

Abstract

A generator-level sensitivity study is presented for long-lived axion-like particles (ALPs) produced in association with top-quark pairs and decaying to displaced electron-positron pairs at the CERN LHC. The prompt objects from the top quark-antiquark system provide independent handles for event selection, allowing the event to be selected independently of the displaced electron pair and extending the search to ALP masses below the dimuon threshold. A search strategy motivated by the CMS detector is developed for ALP masses between 17 MeV and 10 GeV and proper decay lengths between 0.1 mm and 1 m. Expected upper limits at 95% confidence level are computed for σ(pp→ttˉa)×B(a→e+e−)σ(pp\to t\bar t a)\times\mathcal{B}(a\to e^+e^-) as a function of the ALP mass and proper decay length. In the most sensitive region of the parameter space considered, values of the cross section times branching fraction of order 10−310^{-3} pb can be probed for an integrated luminosity of 500 fb−1^{-1} at s=13\sqrt{s}=13 TeV. These projections do not include detector-level displaced-electron reconstruction or instrumental backgrounds.

Prepared for submission to JHEP

Introduction

Long-lived particles (LLPs) arise in many extensions of the Standard Model (SM) [1, 2, 3]. Macroscopic lifetimes can result, for example, from small couplings to SM particles, approximate symmetries, limited decay phase space, or interactions mediated by a high mass scale. Collider searches for displaced decays therefore probe regions of parameter space that can be difficult to access with searches for promptly decaying or detector-stable particles. The distinctive spatial structure of displaced decays can also provide strong discrimination from SM processes, making LLP searches an important part of the broader search program for physics beyond the SM.

Exploiting this sensitivity experimentally can nevertheless be challenging, particularly when the visible decay products are soft, displaced, or otherwise difficult to trigger on directly. One approach is to consider LLP production in association with prompt particles that provide independent handles for event selection. Top-quark pair production is especially useful in this respect: the top-quark decays provide energetic leptons, jets, bb jets, and missing transverse momentum that can be used to select the event without relying entirely on the displaced LLP decay products.

Light axion-like particles (ALPs), whose decay products are soft and difficult to trigger on directly, are a natural target for this strategy, which was investigated in Ref. [4] for long-lived ALPs produced in association with a top quark–antiquark pair and decaying to displaced dimuons. In ALP scenarios with comparable dimensionless fermion couplings, the effective pseudoscalar interaction is proportional to the fermion mass, making top-associated production particularly well motivated. The strategy is, however, not specific to ALPs: it may also be relevant for other light neutral long-lived states produced in association with a ttˉt\bar{t} pair and decaying to displaced leptons. Related displaced signatures arise, for example, in scenarios with dark photons arising from a spontaneously broken U(1)DU(1)_{D} with kinetic mixing, whose couplings to charged fermions are governed by electric charge rather than fermion mass, as well as long-lived scalars mixing with the Higgs boson, heavy neutral leptons, and light states from confining hidden sectors [5, 6]. In what follows, we adopt the ALP as a concrete benchmark; quantitative interpretations in other models would require accounting for differences in production and decay kinematics.

In this work, we extend the top-associated strategy to the process pp→ttˉapp \to t\bar{t}a, a→e+e−a \to e^{+}e^{-}. The dielectron channel opens access to ALP masses below the dimuon threshold, which are inaccessible to the displaced-dimuon strategy of Ref. [4], since ALPs with ma<2mμm_{a} < 2m_{\mu} cannot decay to dimuons. This extension is experimentally nontrivial: displaced-electron reconstruction poses additional challenges relative to muon reconstruction [7, 8], and at low ALP masses the electrons can be both soft and highly collimated. This combination of displacement, low transverse momentum, and collimation lies outside the regime for which standard electron triggering and reconstruction are optimized. Displaced-dielectron searches at ATLAS and CMS have often used photon triggers with relatively high pTp_{T} thresholds [7, 9], while more recent strategies have begun to exploit dedicated displaced-track or low-pTp_{T} electron reconstruction techniques [8, 10]. The associated ttˉt\bar{t} system instead provides trigger and event-selection handles that are independent of the displaced electron pair, enabling this lower-mass regime to be probed without relying on the displaced electrons themselves for triggering or event selection.

At the LHC, direct searches for long-lived ALPs decaying to electron pairs have so far received little attention, and, to our knowledge, the signature of a long-lived ALP produced in association with a ttˉt\bar{t} pair and decaying to an electron pair has not yet been studied, either phenomenologically or experimentally. As a first step towards an experimental search, it is therefore necessary to establish the expected sensitivity of this channel and identify the key handles for event selection. Here we perform a generator-level sensitivity study for long-lived ALPs with masses between 17 MeV and 10 GeV and proper decay lengths between 0.1 mm and 1 m, using the CMS detector geometry and performance as guidance for the search strategy. For proper decay lengths beyond the range considered, the sensitivity of this tracker-based strategy is expected to decrease as an increasing fraction of ALPs decay outside the tracking volume, with the precise decay-position distribution depending on the ALP boost. The lower edge of the mass range also covers the mass scale associated with the X17 anomaly, where excesses in e+e−e^{+}e^{-} pair production in nuclear transitions of 8Be{}^{8}\mathrm{Be}, 4He{}^{4}\mathrm{He}, and 12C{}^{12}\mathrm{C} have been interpreted as a new light boson with a mass of about 17 MeV [11, 12, 13], with pseudoscalar, ALP-like interpretations among those considered [14]. More generally, the range is chosen to extend the reach of CMS toward the low-mass region.

The primary results of the study are presented as expected upper limits on $\sigma(pp \to ttˉa)×B(a→e+e−)t\bar{t}a) \times\mathcal{B}(a \to e^+e^-) as a function of the ALP mass and proper decay length. The study is intended as an idealized estimate of the potential of the top-associated displaced-dielectron signature; detector-level displaced-electron reconstruction and instrumental backgrounds are outside its scope. We additionally interpret the results in the top scenario of Ref. [4], in which only the ALP coupling to top quarks is nonzero at the cutoff scale.

The remainder of this paper is organized as follows. The search strategy is introduced in Sec. 2, and the simulated samples and event selection are described in Sec. 3. The projected sensitivity is presented in Sec. 4, and a summary is given in Sec. 5.

Search strategy

We consider the process pp→ttˉapp \to t\bar{t}a, a→e+e−a \to e^+e^- for ALP masses above the dielectron threshold, ma≥2mem_a \ge2m_e. A representative production diagram is shown in Figure 1 (left). The experimental signature consists of a prompt ttˉt\bar{t} system together with an electron–positron pair originating from a displaced ALP decay, as illustrated in Figure 1 (right). Triggering on and reconstructing ttˉt\bar{t} events is well established at the LHC; leptons, jets, bb jets, and missing transverse momentum from the top-quark decays can provide trigger and event-selection handles independently of the displaced-dielectron system. In this study, we include all ttˉt\bar{t} decay modes, and assume that the events can be selected with 100% efficiency using the ttˉt\bar{t} system. Since the achievable efficiency depends on the decay channels and selection criteria used, the impact of a 10% efficiency is discussed in Sec. 4.

Figure 1. Left: Representative Feynman diagram of the LHC process pp→ttˉapp \to t\bar{t}a, a→e+e−a \to e^+e^-. The black circle indicates the effective ALP-top coupling, and the white circle indicates the effective ALP-electron coupling. In the top scenario considered in Appendix § 9, the latter is radiatively induced by the ALP-top coupling. The dotted line indicates that the ALP decay is displaced. Right: Sketch of the signal event topology.

The search targets ALP decays within the CMS tracking volume, i.e., inside the outer radius of the tracker of about 1.1 m [15], where the two charged decay products can in principle be reconstructed as displaced tracks and associated with a common secondary vertex. Standard CMS electron reconstruction combines tracks reconstructed in the silicon tracker with energy deposits in the electromagnetic calorimeter and is optimized primarily for electrons produced close to the interaction point [16]. Displaced electrons may therefore fail track-seeding or identification requirements, particularly for decays occurring beyond the innermost tracker layers [8].

The analysis is intended as an idealized generator-level sensitivity estimate rather than a complete detector-level projection. No explicit displaced-electron reconstruction efficiency is applied. Although displaced-electron reconstruction efficiencies have been reported for dedicated CMS algorithms [8], they are derived for different signal topologies and kinematic regimes and are not directly transferable to the highly collimated dielectron signatures considered here. When constructing trajectory-dependent observables, in particular the dielectron distance of closest approach and the secondary-vertex position entering the collinearity angle defined in § 3.2.2, the electron trajectories are approximated as straight lines from the generator-level production points along the corresponding momentum directions, neglecting their curvature in the CMS magnetic field. This approximation is most consequential for low-momentum electrons, for which the curvature can be significant. The physics background is modeled using simulated inclusive ttˉt\bar{t} events, which are expected to dominate the sample of events with a ttˉt\bar{t}-like topology and displaced e+e−e^{+}e^{-} pairs, for example from heavy-flavor hadron decays. Other physics processes, such as single-top production or ttˉt\bar{t} production in association with a single boson, are expected to be subdominant and are not considered in this phenomenological study. Backgrounds arising from additional inelastic proton-proton interactions within the same or neighboring bunch crossings (“pileup”), detector-material interactions, object misreconstruction, and other instrumental effects are not included. The resulting projections should therefore be interpreted within these assumptions.

An additional experimental challenge arises at low ALP masses, where the electron and positron can be highly collimated. Related topologies have been targeted in searches for light long-lived particles decaying to collimated leptons or light hadrons [17] and, more recently, for highly collimated electron–positron pairs from light pseudoscalar decays [18]. As shown in Figure 2, the characteristic angular separation decreases rapidly with decreasing mam_a, reaching values well below ΔR(e,e)=0.01\Delta R(e,e) = 0.01 for the lowest masses considered. The highly boosted low-mass ALPs can also decay at large transverse displacements, reducing the tracker lever arm available after the decay. These effects can make it difficult to resolve two distinct electron trajectories and reconstruct two separate electron objects. At sufficiently small separations, overlapping electromagnetic showers can also complicate the reconstruction in the calorimeter. The efficiency for reconstructing such highly collimated, displaced electron pairs is not modeled in the present generator-level study. However, several features of the CMS reconstruction may mitigate some of these effects. First, the electron track information relevant for vertexing is obtained from fits to the tracker hits rather than from the calorimeter shower position. Second, the straight-line treatment considered in this study neglects the opposite bending of the electron and positron trajectories in the CMS magnetic field, which can increase their separation as they propagate through the tracker.

Figure 2. Distribution of the angular separation ΔR(e,e)\Delta R(e,e) between the electron and positron after the full signal selection defined in § 3.2.2, showing several signal benchmarks with cτ=1c\tau= 1 mm. The distributions are normalized to unit area.

Simulation and event selection

The projected sensitivity is evaluated using simulated samples of the signal process and of inclusive SM ttˉt\bar{t} production, which is used to model the physics background in this study. The event simulation and normalization are described in § 3.1, while the displaced-dielectron event selection is presented in § 3.2.

Event simulation

Hard-scattering events for the signal and background processes are generated using MadGraph5_aMC@NLO v. 3.4.2 [19] for proton–proton collisions at s=13\sqrt{s} = 13 TeV. The background sample is generated using the NNPDF3.1 NLO PDF set [20], while the signal samples use the MadGraph default NNPDF2.3 NLO set [21]. Parton showering and hadronization are simulated using PYTHIA8 v. 8.316 [22] with the Monash 2013 tune [23]. The hard-scattering processes are generated at leading order in QCD, and the top-quark mass is set to mt=172m_t = 172 GeV.

The simulated background sample contains approximately 4×1074 \times10^{7} generated inclusive ttˉt\bar{t} events. These events are subsequently normalized to the expected yield using the measured ttˉt\bar{t} production cross section at s=13\sqrt{s} = 13 TeV, σ(pp→ttˉ)=888\sigma(pp \to t\bar{t}) = 888 pb [24].

Signal events are generated using the UFO implementation of the ALP effective theory employed in Ref. [4]. Samples are generated for several benchmark ALP masses,

ma∈{0.017, 0.1, 0.2, 0.3, 0.5, 1, 2, 5, 7, 10} GeV.m_a \in\{0.017,\ 0.1,\ 0.2,\ 0.3,\ 0.5,\ 1,\ 2,\ 5,\ 7,\ 10\}\ \mathrm{GeV}.

and proper decay lengths,

cτ∈{10−1, 100, 101, 102, 103} mm.c\tau\in\{10^{-1},\ 10^{0},\ 10^{1},\ 10^{2},\ 10^{3}\}\ \mathrm{mm}.

The signal normalization is treated as a free parameter: the primary results are expressed as limits on σ(pp→ttˉa)×B(a→e+e−)\sigma(pp \to t\bar{t}a) \times\mathcal{B}(a \to e^{+}e^{-}) as a function of the ALP mass and its proper decay length.

At the generator level, the ALP is required to have a transverse momentum pT>20 GeVp_T > 20\ \mathrm{GeV} and the electrons from the ALP decay are required to have a pseudorapidity of ∣η∣<3.5|\eta| < 3.5 to reduce the computational cost of the simulation. The quoted signal cross sections and corresponding limits are defined within this generated fiducial phase space. A total of 2×1052 \times10^{5} events are generated for each (ma,cτ)(m_a, c\tau) signal benchmark, except for the cτ=1000 mmc\tau= 1000\ \mathrm{mm} samples, for which 4×1054 \times10^{5} events are generated because of the lower selection efficiency.

Event selection

The event selection proceeds in two stages. An initial pre-selection suppresses prompt backgrounds and retains events containing at least one displaced e+e−e^{+}e^{-} candidate satisfying the requirements listed in § 3.2.1. A subsequent signal selection, described in § 3.2.2, further suppresses the ttˉt\bar{t} background using the properties of the dielectron pair.

Dielectron candidates in the ttˉt\bar{t} background are classified at generator level as resonant or non-resonant, according to whether the electron and positron originate from the same parent particle. The two components are shown separately in the distributions below. This classification is used only to illustrate the composition of the simulated background and does not enter the event selection. Resonant candidates are more signal-like, since the two electrons share a common production point, and are therefore harder to separate from the signal than non-resonant candidates using vertexing information alone. Some prominent resonant contributions can nevertheless be reduced with dedicated mass vetoes.

Pre-selection

Each candidate electron is required to be a final-state particle1 with opposite electric charge to the other electron in the pair and to satisfy ∣η∣≤2.5|\eta| \le2.5 and 500 μm<lxy<0.8 m500\ \mu\mathrm{m} < l_{xy} < 0.8\ \mathrm{m}, where the transverse displacement lxy=x2+y2l_{xy} = \sqrt{x^2 + y^2} is computed separately for each electron from its generator-level production coordinates, relative to the interaction point. In signal events, both electrons are additionally required at generator level to originate from the ALP decay. An event passes the pre-selection if it contains at least one electron–positron pair for which both electrons satisfy these requirements.

The minimum ℓxy\ell_{xy} requirement defines a clearly displaced region and is chosen conservatively relative to the typical transverse impact parameter resolution of CMS tracks [7, 25]. The maximum ℓxy\ell_{xy} requirement is motivated by the dimensions of the CMS tracker and is chosen such that the electrons traverse at least three outer-tracker layers after the ALP decay [15].

The background pre-selection efficiency is found to be (9.019±0.005)%(9.019 \pm0.005)\%. The pre-selection efficiencies obtained for each signal benchmark are shown in Figure 3 and in Appendix § 7. At low masses, the efficiency decreases at larger proper decay lengths because an increasing fraction of the ALPs decay beyond ℓxy=0.8\ell_{xy} = 0.8 m. At higher masses, the efficiency peaks at intermediate proper decay lengths; for short proper decay lengths and higher masses, the smaller Lorentz boost relative to the lower mass benchmarks causes more ALPs to decay before reaching ℓxy=500\ell_{xy} = 500 μ\mum. The low pre-selection efficiencies for some signal benchmarks therefore primarily reflect the probability for the ALP to decay within the targeted transverse-displacement range rather than the discriminating power of the pre-selection against background. A common pre-selection is retained across the signal benchmarks to define a uniform displaced fiducial region, while the subsequent signal selection provides the main background rejection.

Figure 3. Pre-selection efficiencies for each signal benchmark.

Signal selection

The signal selection exploits the distinctive features of the signal and background processes to suppress background contamination and enhance sensitivity to the signal. If more than one dielectron candidate satisfies the pre-selection, the candidate with the smallest value of

Rℓxy=(xe−−xe+)2+(ye−−ye+)2(∣xe−∣+∣xe+∣)2+(∣ye−∣+∣ye+∣)2R_{\ell_{xy}} = \frac{\sqrt{(x_{e^-}-x_{e^+})^2 + (y_{e^-}-y_{e^+})^2}}{\sqrt{(|x_{e^-}|+|x_{e^+}|)^2 + (|y_{e^-}|+|y_{e^+}|)^2}}

is selected, where (xe±,ye±)(x_{e^\pm}, y_{e^\pm}) are the transverse coordinates of the production points of the electron and positron. This criterion favors electron–positron pairs whose production points are close to one another, relative to their displacement from the beamline, and is intended as a generator-level proxy for compatibility with a common displaced vertex. The RlxyR_{lxy} variable itself is not an experimentally reconstructed observable; in an experimental analysis, the corresponding candidate choice would instead be based on reconstructed track and vertex information.

Figure 4 shows the dielectron invariant-mass distribution after the pre-selection. Background contributions from the J/ψJ/\psi, ψ(2S)\psi(2S), and ZZ boson resonances are reduced by rejecting candidates whose invariant masses meem_{ee} fall within the windows listed in Table 1.

Figure 4. Invariant-mass distribution of the dielectron pair after the pre-selection, showing several signal benchmarks with cτ=1c\tau= 1 mm, together with the resonant (light gray) and non-resonant (dark gray) ttˉt\bar{t} backgrounds. The background yield is normalized to its experimental cross section, while the signal yields are normalized to an illustrative cross section of 0.1 pb. An integrated luminosity of 500 fb−1^{-1} is assumed.

Veto window [GeV]
J/ψJ/\psi3.05<mee<3.133.05 < m_{ee} < 3.13
ψ(2S)\psi(2S)3.50<mee<3.863.50 < m_{ee} < 3.86
ZZ86.63<mee<95.7586.63 < m_{ee} < 95.75

Table 1. Excluded invariant-mass regions.

The discriminating variables used for further background suppression are summarized in Table 2. Their distributions after the pre-selection and invariant-mass vetoes are shown in Figure 5.

FeatureDescription
Electron isolation (Iemin⁡I_e^{\min})Ie=pTe/∑ΔR<0.3pTchargedI_e = p_{\mathrm{T}}^e / \sum_{\Delta R<0.3} p_{\mathrm{T}}^{\mathrm{charged}}, where the sum runs over all charged particles within ΔR<0.3\Delta R < 0.3, including the electron itself but excluding the other electron in the pair. Suppresses electrons produced inside jets.
Distance of closest approach (DCAee_{ee})Minimum 3D distance between the electron trajectories. Suppresses non-resonant background.
Transverse momentum (pTe,min⁡p_{\mathrm{T}}^{e,\min})Transverse momentum of the electron with the lower pTp_{\mathrm{T}} in the pair. Suppresses π0→e+e−γ\pi^0 \to e^+e^-\gamma decays, where π0\pi^0 is produced predominantly in KS0K^0_{\mathrm{S}} decays in the simulated ttˉt\bar{t} background, with the remaining cases arising mainly from decays of strange baryons.
Collinearity angle (ϕcoll\phi_{\mathrm{coll}})Angle between the dielectron transverse momentum vector and the transverse displacement vector, l⃗xy≡(x,y)SV−(x,y)PV\vec{l}_{\mathrm{xy}} \equiv(x,y)_{\mathrm{SV}} - (x,y)_{\mathrm{PV}}, where PV denotes the primary vertex (taken as the interaction point) and SV denotes the secondary vertex. Suppresses displaced pairs not pointing back to the PV.

Table 2. Discriminating features used for further background suppression after the pre-selection and invariant-mass selection.

Figure 5. Distribution of the discriminating features used for further background suppression after applying the pre-selection and invariant-mass selection: the isolation of the least isolated electron in the pair (upper left), the distance of closest approach between the electron and the positron (upper right), the transverse momentum of the electron with the lowest pTp_T in the pair (lower left), and the collinearity angle (lower right). For the distance of closest approach and the collinearity angle, the first bin contains all events below 0.5 mm and 10−310^{-3} rad, respectively, and the yields are divided by the bin width. The plots show several signal benchmarks with cτ=1c\tau= 1 mm, together with the resonant (light gray) and non-resonant (dark gray) ttˉt\bar{t} backgrounds. The background yield is normalized to its experimental cross section, while the signal yields are normalized to an illustrative cross section of 0.1 pb. An integrated luminosity of 500 fb−1^{-1} is assumed.

The electron trajectories are constructed as straight lines from their generator-level production points along their momentum directions. The distance of closest approach is defined as the minimum three-dimensional separation between these trajectories. The secondary-vertex position entering the collinearity angle is defined as the point that minimizes the sum of the squared perpendicular distances to the two electron trajectories, treated as infinite straight lines. As discussed in § 2, this treatment neglects the curvature of the electron trajectories in the CMS magnetic field.

The choice of selection thresholds is guided by the Punzi figure of merit [26]

f(ϵS,B)=ϵSB+a2f(\epsilon_{\mathrm{S}}, B) = \frac{\epsilon_{\mathrm{S}}}{\sqrt{B} + \frac{a}{2}}

with a=3a = 3, where BB is the number of background events passing the multidimensional rectangular selection, normalized to the expected number of background events at an integrated luminosity of 500 fb−1^{-1}, and ϵS\epsilon_{\mathrm{S}} is the efficiency of the chosen cuts on signal. The cut parameter space defined by the electron isolation, the distance of closest approach between the two electrons, the transverse momentum of the lower-pTp_{\mathrm{T}} electron in the pair, and the collinearity angle is scanned separately for each (ma,cτ)(m_a, c\tau) benchmark. A single common selection is then chosen as an informed compromise among the benchmark-specific optima.

A collinearity angle of ∣ϕcoll∣<0.05|\phi_{\mathrm{coll}}| < 0.05 rad and a maximum distance of closest approach between the two electrons of 0.5 mm are required. For dielectron pairs with an invariant mass mee≥1m_{ee} \ge1 GeV, each electron is required to have an isolation greater than 0.4 and a transverse momentum of pT>8p_T > 8 GeV. For mee<1m_{ee} < 1 GeV, the isolation requirement is tightened to greater than 0.7, while the transverse-momentum threshold is lowered to 1 GeV in order to maximize sensitivity to lower ALP masses.

The full selection has an efficiency of (1.84±0.02)×10−4(1.84 \pm0.02) \times10^{-4} for the inclusive ttˉt\bar{t} sample, corresponding to a suppression of approximately a factor of 500 relative to the pre-selection. For the signal benchmarks with the highest projected sensitivity, the signal-selection stage retains more than 80% of the events that pass the pre-selection. The total signal efficiencies, defined relative to the generated samples and including both the pre-selection and signal selection, are shown in Figure 6 and in Appendix § 7.

Figure 6. Total selection efficiencies for each signal benchmark, defined as the fraction of generated events that pass the pre-selection and full signal selection.

Projected sensitivity

The sensitivity to the ttˉat\bar{t}a, a→e+e−a \to e^{+}e^{-} signature is evaluated by computing upper limits at 95% confidence level (CL) on the product of the production cross section times the branching fraction of the ALP decay into dielectrons, σ(pp→ttˉa)×B(a→e+e−)\sigma(pp \to t\bar{t}a) \times\mathcal{B}(a \to e^{+}e^{-}), as a function of the ALP mass and proper decay length. As defined in Sec. 3.1, the quoted cross sections refer to the generated fiducial phase space with ALP pT>20p_{\mathrm{T}} > 20 GeV and electron ∣η∣<3.5|\eta| < 3.5.

To compute the expected upper limits, we use the Combine tool, a software package developed by the CMS Collaboration for statistical analyses [27]. The expected limits are estimated using the frequentist AsymptoticLimits method [28].

To compute the expected upper limits, the events are categorized based on the displacement of the least displaced electron after the signal selection, using six bins corresponding to the pixel tracker and one bin for the outer tracker, as shown in Figure 7. The displacement of the least displaced electron is used so that an event enters a higher-displacement category only when both electrons are at least that displaced, providing a conservative categorization for background pairs whose electrons can originate from different positions. For signal candidates, the two electrons originate from the same ALP decay point and therefore have the same generator-level lxyl_{xy}. As a simplified treatment of the systematic uncertainties, independent 30% rate uncertainties are applied to the signal and background yields. Each nuisance parameter is taken to be fully correlated across the seven lxyl_{xy} categories.

Figure 7. Distribution of the transverse displacement lxyl_{xy} of the least displaced electron after the full signal selection, showing several signal benchmarks with ma=1m_a = 1 GeV, together with the resonant (light gray) and non-resonant (dark gray) ttˉt\bar{t} backgrounds. The background yield is normalized to its experimental cross section, while the signal yields are normalized to an illustrative cross section of 0.1 pb. An integrated luminosity of 500 fb−1^{-1} is assumed.

The expected upper limits are computed for each signal benchmark. Between the simulated (ma,cτ)(m_a, c\tau) points, the limits are interpolated linearly in log⁡ma\log m_a, log⁡cτ\log c\tau, and log⁡[σ(pp→ttˉa)×B(a→e+e−)]\log[\sigma(pp \to t\bar{t}a) \times\mathcal{B}(a \to e^{+}e^{-})]. Figure 8 shows the expected limits for integrated luminosities of 150 fb−1^{-1} and 500 fb−1^{-1}. These luminosity values are chosen to be representative of the integrated luminosity of the LHC Run 2 dataset and of the combined Run 2 and Run 3 datasets, respectively; both projections are evaluated at s=13\sqrt{s} = 13 TeV. The corresponding one-dimensional limits for each studied cτc\tau value, including the expected ±1\pm1 and ±2\pm2 standard-deviation variations, are shown in Appendix B. At the shortest studied cτc\tau, the best limits are expected for the lower ALP masses, while for the largest proper decay lengths the limits degrade as the mass decreases. Both behaviors are mostly driven by the previously discussed boost dependence of the signal efficiency. In the most sensitive region of parameter space, values of σ(pp→ttˉ)×B(a→e+e−)\sigma(pp \to t\bar{t}) \times\mathcal{B}(a \to e^{+}e^{-}) as small as O(10−3)\mathcal{O}(10^{-3}) pb can be probed. A model-specific interpretation of the limits in terms of ALP couplings is given in Appendix § 9.

Figure 8. Expected 95% CL upper limits on σ(pp→ttˉa)×B(a→e+e−)\sigma(pp \to t\bar{t}a) \times\mathcal{B}(a \to e^{+}e^{-}) for integrated luminosities of 150 fb−1^{-1} (left) and 500 fb−1^{-1} (right) in the (ma,cτ)(m_a,c\tau) parameter space, using a linear interpolation of the logarithm of the expected upper limit in (log⁡ma,log⁡cτ)(\log m_a,\log c\tau) between the studied points. The white contours indicate selected values of the expected upper limit. The mass windows vetoed in the selection are excluded from the plotted range.

The projected sensitivity extends below the dimuon threshold and reaches the lowest masses considered in this study. For these low-mass benchmarks, however, the electron pairs are highly collimated, and the limits do not include a loss of efficiency associated with resolving and reconstructing two displaced electrons. The corresponding sensitivity should therefore be interpreted as an idealized generator-level projection.

This study assumes 100% efficiency for the trigger, ttˉt\bar{t} reconstruction, and displaced-dielectron reconstruction. To assess the impact of these assumptions, the combined efficiency for triggering on and reconstructing the prompt ttˉt\bar{t} system used to select the event is reduced to 10%, with the corresponding factor applied to both the signal and simulated ttˉt\bar{t} background yields. The expected limits then weaken by approximately a factor of 3, close to the S/BS/\sqrt{B} scaling expected when signal and background are both reduced by a factor of 10 in a background-dominated regime. The sensitivity to a larger total background yield is probed separately by increasing the simulated background yields by factors of 10 and 100, with the signal unchanged; the expected limits weaken by approximately factors of 3 and 10, respectively. Finally, flat displaced-dielectron reconstruction efficiencies of 10% and 1% are applied to the signal only, with the prompt-event selection restored to its nominal efficiency and the background unchanged; the expected limits weaken by approximately factors of 10 and 100, respectively. For the variations considered, the projected sensitivity is therefore less strongly affected by the efficiency for selecting the event using the prompt ttˉt\bar{t} system or by large changes in the background normalization than by the displaced-dielectron reconstruction efficiency, to which the limits scale approximately inversely. These variations are intended to test the robustness of the projection rather than to provide estimates of realistic detector-level efficiencies or background rates. The 30% rate uncertainties described above are retained in all of these variations.

Summary

The sensitivity of a search for long-lived axion-like particles produced in association with top-quark pairs and decaying to displaced electron–positron pairs at the LHC has been investigated. The prompt objects from the ttˉt\bar{t} system provide independent handles for triggering and event selection, allowing the event to be selected independently of the displaced electron pair. This strategy extends the top-associated LLP search program to masses below the dimuon threshold.

A generator-level search strategy motivated by the CMS detector was developed for ALP masses between 17 MeV and 10 GeV and proper decay lengths between 0.1 mm and 1 m. Inclusive SM ttˉt\bar{t} simulation was used to model the physics background. Expected 95% CL upper limits were computed for σ(pp→ttˉa)×B(a→e+e−)\sigma(pp \to t\bar{t}a) \times\mathcal{B}(a \to e^{+}e^{-}) as a function of the ALP mass and proper decay length, for integrated luminosities of 150 and 500 fb−1^{-1} at s=13\sqrt{s} = 13 TeV. In the most sensitive region of the parameter space considered, values of the cross section times branching fraction of order 10−310^{-3} pb can be probed for 500 fb−1^{-1}. The results should be interpreted as an idealized generator-level projection. Backgrounds arising from detector-material interactions, object misreconstruction, and other instrumental effects have not been simulated, and no detector-level model is included for the efficiency of reconstructing displaced electrons or resolving highly collimated electron pairs.

Robustness tests show that reducing the combined efficiency for triggering on and reconstructing the prompt ttˉt\bar{t} system to 10%, or increasing the simulated background yield by a factor of 10, weakens the expected limits by approximately a factor of 3; a hundredfold increase in the background weakens them by approximately a factor of 10. By contrast, flat displaced-dielectron reconstruction efficiencies of 10% and 1% weaken the limits by approximately factors of 10 and 100, respectively. Among the effects considered, the displaced-dielectron reconstruction efficiency therefore has the strongest impact on the projected cross section sensitivity. This is particularly relevant at the lowest ALP masses, where very small angular separations between the electron and positron are predicted and their trajectories can be significantly affected by their opposite bending in the CMS magnetic field. A detector-level study of these effects will therefore be required to establish the experimental sensitivity of a Run 2 and Run 3 analysis in this regime. For future HL-LHC searches, the fine granularity of the CMS high-granularity calorimeter [29], to be installed for the Phase-2 upgrade, may provide additional information for resolving highly collimated electron pairs in the endcap region.

The results of this study quantify the generator-level potential of the top-associated strategy for displaced-dielectron signatures and provide a basis for a detector-level experimental study. This work establishes top-associated production as a promising strategy for probing light long-lived particles decaying to electron pairs, a regime largely unexplored at the LHC.

Acknowledgments

JA, FB, CC, AP, LR, and RSR acknowledge support from DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, and support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany’s Excellence Strategy EXC 2121 "Quantum Universe" – 390833306. XCV and RSR acknowledge support from the Spanish Research State Agency under projects PID2022-139514NA-C33, PCI2023-145984-2 and EUR2025-164824; by the “María de Maeztu” grant CEX2023-001318-M, funded by MICIU/AEI/10.13039/501100011033; and by the Xunta de Galicia (CIGUS Network of Research Centres, project 2025-CP119 and project ED431B 2026/17).

Selection efficiencies

Processmam_a [GeV]cτc\tau [mm]Pre-selection efficiency (%)Total selection efficiency (%)
ttˉt\bar{t}––9.019±0.0059.019 \pm0.005(1.84±0.02)×10−2(1.84 \pm0.02) \times10^{-2}
ttˉat\bar{t}a0.01710−110^{-1}18.144±0.08618.144 \pm0.08614.738±0.07914.738 \pm0.079
ttˉat\bar{t}a0.01710010^{0}3.997±0.0443.997 \pm0.0443.137±0.0393.137 \pm0.039
ttˉat\bar{t}a0.01710110^{1}0.434±0.0150.434 \pm0.0150.337±0.0130.337 \pm0.013
ttˉat\bar{t}a0.01710210^{2}0.046±0.0050.046 \pm0.0050.038±0.0040.038 \pm0.004
ttˉat\bar{t}a0.01710310^{3}0.016±0.0020.016 \pm0.0020.013±0.0020.013 \pm0.002
ttˉat\bar{t}a0.110−110^{-1}24.827±0.09724.827 \pm0.09720.642±0.09120.642 \pm0.091
ttˉat\bar{t}a0.110010^{0}14.278±0.07814.278 \pm0.07811.517±0.07111.517 \pm0.071
ttˉat\bar{t}a0.110110^{1}2.540±0.0352.540 \pm0.0352.037±0.0322.037 \pm0.032
ttˉat\bar{t}a0.110210^{2}0.270±0.0120.270 \pm0.0120.210±0.0100.210 \pm0.010
ttˉat\bar{t}a0.110310^{3}0.034±0.0030.034 \pm0.0030.027±0.0030.027 \pm0.003
ttˉat\bar{t}a0.210−110^{-1}25.027±0.09725.027 \pm0.09720.977±0.09120.977 \pm0.091
ttˉat\bar{t}a0.210010^{0}19.456±0.08919.456 \pm0.08915.849±0.08215.849 \pm0.082
ttˉat\bar{t}a0.210110^{1}4.698±0.0474.698 \pm0.0473.701±0.0423.701 \pm0.042
ttˉat\bar{t}a0.210210^{2}0.541±0.0160.541 \pm0.0160.411±0.0140.411 \pm0.014
ttˉat\bar{t}a0.210310^{3}0.058±0.0040.058 \pm0.0040.046±0.0030.046 \pm0.003
ttˉat\bar{t}a0.310−110^{-1}25.002±0.09725.002 \pm0.09720.966±0.09120.966 \pm0.091
ttˉat\bar{t}a0.310010^{0}21.655±0.09221.655 \pm0.09217.835±0.08617.835 \pm0.086
ttˉat\bar{t}a0.310110^{1}6.524±0.0556.524 \pm0.0555.208±0.0505.208 \pm0.050
ttˉat\bar{t}a0.310210^{2}1.349±0.0261.349 \pm0.0261.053±0.0231.053 \pm0.023
ttˉat\bar{t}a0.310310^{3}0.086±0.0050.086 \pm0.0050.067±0.0040.067 \pm0.004
ttˉat\bar{t}a0.510−110^{-1}24.682±0.09624.682 \pm0.09620.759±0.09120.759 \pm0.091
ttˉat\bar{t}a0.510010^{0}23.614±0.09523.614 \pm0.09519.665±0.08919.665 \pm0.089
ttˉat\bar{t}a0.510110^{1}9.485±0.0669.485 \pm0.0667.605±0.0597.605 \pm0.059
ttˉat\bar{t}a0.510210^{2}1.312±0.0251.312 \pm0.0251.027±0.0231.027 \pm0.023
ttˉat\bar{t}a0.510310^{3}0.438±0.0100.438 \pm0.0100.345±0.0090.345 \pm0.009
ttˉat\bar{t}a110−110^{-1}23.817±0.09523.817 \pm0.09519.455±0.08919.455 \pm0.089
ttˉat\bar{t}a110010^{0}24.840±0.09724.840 \pm0.09720.146±0.09020.146 \pm0.090
ttˉat\bar{t}a110110^{1}14.459±0.07914.459 \pm0.07911.164±0.07011.164 \pm0.070
ttˉat\bar{t}a110210^{2}2.487±0.0352.487 \pm0.0351.845±0.0301.845 \pm0.030
ttˉat\bar{t}a110310^{3}0.718±0.0130.718 \pm0.0130.525±0.0110.525 \pm0.011
ttˉat\bar{t}a210−110^{-1}22.479±0.09322.479 \pm0.09316.471±0.08316.471 \pm0.083
ttˉat\bar{t}a210010^{0}25.120±0.09725.120 \pm0.09718.067±0.08618.067 \pm0.086
ttˉat\bar{t}a210110^{1}19.354±0.08819.354 \pm0.08813.017±0.07513.017 \pm0.075
ttˉat\bar{t}a210210^{2}11.897±0.07211.897 \pm0.0727.896±0.0607.896 \pm0.060
ttˉat\bar{t}a210310^{3}0.539±0.0120.539 \pm0.0120.311±0.0090.311 \pm0.009
ttˉat\bar{t}a510−110^{-1}18.768±0.08718.768 \pm0.08713.961±0.07713.961 \pm0.077
ttˉat\bar{t}a510010^{0}24.268±0.09624.268 \pm0.09617.253±0.08417.253 \pm0.084
ttˉat\bar{t}a510110^{1}23.628±0.09523.628 \pm0.09516.340±0.08316.340 \pm0.083
ttˉat\bar{t}a510210^{2}16.317±0.08316.317 \pm0.08310.871±0.07010.871 \pm0.070
ttˉat\bar{t}a510310^{3}1.253±0.0181.253 \pm0.0180.731±0.0130.731 \pm0.013
ttˉat\bar{t}a710−110^{-1}16.683±0.08316.683 \pm0.08312.747±0.07512.747 \pm0.075
ttˉat\bar{t}a710010^{0}24.194±0.09624.194 \pm0.09617.405±0.08517.405 \pm0.085
ttˉat\bar{t}a710110^{1}23.341±0.09523.341 \pm0.09516.657±0.08316.657 \pm0.083
ttˉat\bar{t}a710210^{2}17.886±0.08617.886 \pm0.08612.277±0.07312.277 \pm0.073
ttˉat\bar{t}a710310^{3}1.740±0.0211.740 \pm0.0211.019±0.0161.019 \pm0.016
ttˉat\bar{t}a1010−110^{-1}14.419±0.07914.419 \pm0.07911.175±0.07011.175 \pm0.070
ttˉat\bar{t}a1010010^{0}23.424±0.09523.424 \pm0.09517.146±0.08417.146 \pm0.084
ttˉat\bar{t}a1010110^{1}23.456±0.09523.456 \pm0.09517.053±0.08417.053 \pm0.084
ttˉat\bar{t}a1010210^{2}19.132±0.08819.132 \pm0.08813.325±0.07613.325 \pm0.076
ttˉat\bar{t}a1010310^{3}2.206±0.0232.206 \pm0.0231.344±0.0181.344 \pm0.018

Table 3. Pre-selection and total selection efficiencies. The uncertainties are statistical.

Expected upper limits for each studied ctau value

Expected upper limits for $c\tau = 0.1$ mm

(a) cτ=0.1c\tau= 0.1 mm

Expected upper limits for $c\tau = 1$ mm

(b) cτ=1c\tau= 1 mm

Expected upper limits for $c\tau = 10$ mm

(c) cτ=10c\tau= 10 mm

(d) cτ=100c\tau= 100 mm

(e) cτ=1000c\tau= 1000 mm

Figure 9. Expected 95% CL upper limits on σ(pp→ttˉa)×B(a→e+e−)\sigma(pp \to t\bar{t}a) \times\mathcal{B}(a \to e^{+}e^{-}) as a function of the ALP mass mam_a, for the studied cτc\tau values and integrated luminosities of 150 and 500 fb−1^{-1} at s=13\sqrt{s} = 13 TeV. The bands show the expected variations within one and two standard deviations (s.d.) for the 500 fb−1^{-1} projection. The mass windows vetoed in the selection are excluded from the plotted range.

Interpretation in the top scenario

Although the primary results of this study are presented as limits on σ(pp→ttˉa)×B(a→e+e−)\sigma(pp \to t\bar{t}a) \times\mathcal{B}(a \to e^{+}e^{-}) as a function of the ALP mass mam_a and proper decay length cτc\tau, they can also be interpreted in a specific ALP benchmark model. We consider the top scenario introduced in Ref. [4], in which the ALP coupling to top quarks is the only nonzero ALP coupling at the cutoff scale Λ=4πfa\Lambda= 4\pi f_a. In the notation of Ref. [4], this corresponds to

ctt(Λ)≡ctt,cff(Λ)=0(f≠t),cVV(Λ)=0,(1)c_{tt}(\Lambda) \equiv c_{tt}, \qquad c_{ff}(\Lambda) = 0 \quad(f \ne t), \qquad c_{VV}(\Lambda) = 0, \tag*{(1)}

where cffc_{ff} and cVVc_{VV} denote the ALP couplings to SM fermions and gauge fields, respectively. We set fa=1f_a = 1 TeV, following Ref. [4]. The phenomenology is then specified by two parameters: the ALP mass mam_a and the effective top coupling ∣ctt∣/fa\lvert c_{tt}\rvert/f_a.

Renormalization-group evolution and loop effects generate ALP couplings to lighter fermions and gauge bosons at lower energy scales. Numerical predictions for the induced couplings and decay widths are obtained using the public ttalps code [30], which implements the results of Ref. [31, 32]. In the top scenario, and for fixed faf_a, the induced couplings scale linearly with ∣ctt∣/fa\lvert c_{tt}\rvert/f_a. At fixed mam_a and faf_a, the partial and total decay widths therefore scale as (ctt/fa)2(c_{tt}/f_a)^2, while the proper decay length scales as (fa/ctt)2(f_a/c_{tt})^2. The branching fractions are independent of the overall normalization of cttc_{tt} for fixed faf_a. Additional ALP couplings at the cutoff scale would in general modify the decay width and branching fractions, so the relation between production rate, lifetime, and decay modes used here is specific to the top scenario.

Figure 10 shows the resulting ALP proper decay length as a function of the ALP mass for two representative ct/fac_t/f_a values (left), together with the branching fractions to dielectrons, diphotons, and dimuons (right). Below the dimuon threshold, only the dielectron and diphoton decay modes are kinematically accessible. At larger masses, the opening of additional leptonic and hadronic decay channels reduces B(a→e+e−)\mathcal{B}(a \to e^+e^-). Around the GeV scale, the branching-fraction predictions depend on the treatment of hadronic ALP decays; we follow the implementation used in Ref. [4].

Figure 10. ALP proper decay length (left) and branching fractions to dielectrons, diphotons, and dimuons (right), calculated in the top scenario, as functions of the ALP mass. The dip in cτc\tau around ma=mπm_a = m_\pi is due to ALP–pion mixing. The branching fraction to dielectrons is strongly suppressed above the dimuon threshold. For masses ma≥3mπm_a \ge3m_\pi, hadronic channels open, and the branching fraction to dimuons is suppressed.

The ttˉat\bar{t}a production cross section is calculated with MadGraph5_aMC@NLO for several ALP masses and coupling values. The cross sections are evaluated within the same generated fiducial phase space used for the primary results, requiring pT(a)>20p_T(a) > 20 GeV and ∣η(e)∣<3.5|\eta(e)| < 3.5. For fixed faf_a, the cross section scales as ct2c_t^2, and its residual mass dependence is parameterized for the mass range considered using the generated samples as

σ(pp→ttˉa)=(p0+p1ma)ct2.(2)\sigma(pp \to t\bar{t}a) = (p_0 + p_1 m_a)c_t^2. \tag*{(2)}

The dependence of σ(pp→ttˉa)/ct2\sigma(pp \to t\bar{t}a)/c_t^2 on the ALP mass is shown in Figure 11 for the generated coupling values, together with the linear fit used in Eq. (C.2). The cross section is evaluated at the following mass points:

Figure 11. Dependence of σ(pp→ttˉa)/ct2\sigma(pp \to t\bar{t}a)/c_t^2 on the ALP mass for the generated coupling values. The line shows the linear fit used in Eq. (C.2).

ma∈{0.01, 0.1, 0.2, 0.3, 0.4, 0.5, 0.7, 1, 2, 3, 4, 5, 7, 10, 20, 40, 50, 70, 80} GeV.(3)m_a \in\{0.01,\ 0.1,\ 0.2,\ 0.3,\ 0.4,\ 0.5,\ 0.7,\ 1,\ 2,\ 3,\ 4,\ 5,\ 7,\ 10,\ 20,\ 40,\ 50,\ 70,\ 80\}\ \mathrm{GeV}. \tag*{(3)}

The fit gives p0=(0.11935±0.00039) pbp_0 = (0.11935 \pm0.00039)\ \mathrm{pb}, p1=(−6.71±0.14)×10−4 pb GeV−1p_1 = (-6.71 \pm0.14) \times10^{-4}\ \mathrm{pb}\ \mathrm{GeV}^{-1}, where mam_a is expressed in GeV. The maximum fractional deviation between the fitted parameterization and the generated cross sections is approximately 3%. No additional theoretical uncertainty from renormalization- and factorization-scale or PDF variations is included in the production cross section prediction.

Together with the predicted B(a→e+e−)\mathcal{B}(a \to e^{+}e^{-}) and cτc\tau, this provides a mapping from each point in the (ma,∣ctt∣/fa)(m_a, |c_{tt}|/f_a) parameter space to the corresponding (ma,cτ,σB)(m_a, c\tau, \sigma\mathcal{B}) point constrained by the primary analysis, where σB≡σ(pp→ttˉa)×B(a→e+e−)\sigma\mathcal{B} \equiv\sigma(pp \to t\bar{t}a) \times\mathcal{B}(a \to e^{+}e^{-}).

To obtain the projected sensitivity in the top scenario, the expected upper limits on σ(pp→ttˉa)×B(a→e+e−)\sigma(pp \to t\bar{t}a) \times\mathcal{B}(a \to e^{+}e^{-}) are interpolated over the (ma,cτ)(m_a, c\tau) plane using the logarithmic interpolation described in § 4. No extrapolation is performed outside the studied (ma,cτ)(m_a, c\tau) range. For each point in the (ma,∣ctt∣/fa)(m_a, |c_{tt}|/f_a) parameter space, the predicted proper decay length determines the corresponding interpolated upper limit. The resulting expected upper limit on σ(pp→ttˉa)×B(a→e+e−)\sigma(pp \to t\bar{t}a)\times\mathcal{B}(a \to e^{+}e^{-}) is shown in Figure 12 (left). Comparing this limit with the corresponding theoretical prediction gives the projected exclusion shown in Figure 12 (right). For the fixed choice fa=1f_a = 1 TeV, part of the parameter space shown in Figure 12 corresponds to large values of the dimensionless coefficient cttc_{tt}. In this strong-coupling regime, the perturbative interpretation of the effective field theory and the quadratic extrapolation of the production cross section should be treated with caution. The precise boundary of this regime is model dependent; the large-cttc_{tt} region is therefore shown to illustrate the mapping of the generator-level sensitivity rather than as a quantitatively robust effective field theory exclusion.

Figure 12. Projected sensitivity in the top scenario, evaluated for an integrated luminosity of 500 fb−1^{-1} at s=13\sqrt{s} = 13 TeV. Expected 95% CL upper limits on σ(pp→ttˉa)×B(a→e+e−)\sigma(pp \to t\bar{t}a)\times\mathcal{B}(a \to e^{+}e^{-}) (left) and exclusion region (right) in the (ma,∣ctt∣/fa)(m_a, |c_{tt}|/f_a) parameter space (fa=1f_a = 1 TeV). The green region indicates the values of mam_a and ∣ctt∣/fa|c_{tt}|/f_a for which the theoretical prediction is above the expected upper limit. The gray region indicates the evaluated parameter space that is not excluded. The mass windows vetoed in the selection are excluded from the plotted range.

For comparison with the displaced-dimuon strategy of Ref. [4], Figure 13 shows the expected limits on ∣ctt∣/fa|c_{tt}|/f_a for an integrated luminosity of 150 fb−1^{-1} at s=13\sqrt{s} = 13 TeV, matching the luminosity used for the Run 2 projection in Ref. [4]. The dielectron channel extends the top-associated strategy below the dimuon threshold, ma=2mμm_a = 2m_\mu, where the displaced-dimuon search is kinematically inaccessible. Above this threshold, the dielectron branching fraction becomes strongly suppressed in the top scenario, while the dimuon channel provides sensitivity. The comparison illustrates the complementarity of the two final states; differences in their absolute sensitivities should not be interpreted as a direct comparison of experimental performance, since the two studies use different analysis and background-modeling assumptions.

Figure 13. Expected 95% CL upper limits on ∣ctt∣/fa|c_{tt}|/f_a as a function of the ALP mass mam_a, in the top scenario, for an integrated luminosity of 150 fb−1^{-1}. Below the dimuon threshold (dashed vertical line), the blue circles show the smallest coupling excluded by this displaced-dielectron study, while, above the threshold, the orange squares show the expected limits of the displaced-dimuon study of Ref. [4]. Lines connecting the mass points are shown to guide the eye.

References

  1. [1]L. Lee, C. Ohm, A. Soffer, and T.-T. Yu, Collider Searches for Long-Lived Particles Beyond the Standard Model, Prog. Part. Nucl. Phys. 106 (2019) 210–255, [arXiv:1810.12602]. [Erratum: Prog.Part.Nucl.Phys. 122, 103912 (2022)].DOI
  2. [2]J. Alimena et al., Searching for long-lived particles beyond the Standard Model at the Large Hadron Collider, J. Phys. G 47 (2020), no. 9 090501, [arXiv:1903.04497].DOI
  3. [3]S. Knapen and S. Lowette, A Guide to Hunting Long-Lived Particles at the LHC, Ann. Rev. Nucl. Part. Sci. 73 (2023) 421–449, [arXiv:2212.03883].arxiv.org/abs/2212.03883
  4. [4]L. Rygaard, J. Niedziela, R. Schäfer, S. Bruggisser, J. Alimena, S. Westhoff, and F. Blekman, Top Secrets: long-lived ALPs in top production, JHEP 10 (2023) 138, [arXiv:2306.08686].DOI
  5. [5]M. J. Strassler and K. M. Zurek, Echoes of a hidden valley at hadron colliders, Phys. Lett. B 651 (2007) 374–379, [hep-ph/0604261].DOI
  6. [6]D. Curtin et al., Exotic decays of the 125 GeV Higgs boson, Phys. Rev. D 90 (2014), no. 7 075004, [arXiv:1312.4992].DOI
  7. [7]CMS Collaboration, A. Tumasyan et al., Search for long-lived particles decaying to leptons with large impact parameter in proton–proton collisions at √s = 13 TeV, Eur. Phys. J. C 82 (2022), no. 2 153, [arXiv:2110.04809].DOI
  8. [8]CMS Collaboration, “Search for inelastic dark matter with low-momentum displaced electrons in proton-proton collisions at √s = 13 TeV.” CMS-PAS-EXO-24-036, 2026.
  9. [9]ATLAS Collaboration, G. Aad et al., Search for long-lived particles using displaced vertices of oppositely charged leptons in 140 fb−1 of pp collisions at √s = 13 TeV with the ATLAS detector, Phys. Lett. B 878 (2026) 140497, [arXiv:2601.05664].DOI
  10. [10]ATLAS Collaboration, G. Aad et al., Search for displaced leptons in √s = 13 TeV and 13.6 TeV pp collisions with the ATLAS detector, Phys. Rev. D 112 (2025), no. 1 012016, [arXiv:2410.16835].DOI
  11. [11]A. J. Krasznahorkay et al., Observation of Anomalous Internal Pair Creation in Be8 : A Possible Indication of a Light, Neutral Boson, Phys. Rev. Lett. 116 (2016), no. 4 042501, [arXiv:1504.01527].DOI
  12. [12]A. J. Krasznahorkay, M. Csאַטlós, L. Csige, J. Gulyás, A. Krasznahorkay, B. M. Nyakó, I. Rajta, J. Timár, I. Vajda, and N. J. Sas, New anomaly observed in He4 supports the existence of the hypothetical X17 particle, Phys. Rev. C 104 (2021), no. 4 044003, [arXiv:2104.10075].DOI
  13. [13]A. J. Krasznahorkay et al., New evidence supporting the existence of the hypothetic X17 particle, arXiv:1910.10459.
  14. [14]U. Ellwanger and S. Moretti, Possible Explanation of the Electron Positron Anomaly at 17 MeV in 8Be Transitions Through a Light Pseudoscalar, JHEP 11 (2016) 039, [arXiv:1609.01669].arxiv.org/abs/1609.01669
  15. [15]CMS Collaboration, A. Hayrapetyan et al., Development of the CMS detector for the CERN LHC Run 3, JINST 19 (2024), no. 05 P05064, [arXiv:2309.05466].DOI
  16. [16]CMS Collaboration, A. M. Sirunyan et al., Electron and photon reconstruction and identification with the CMS experiment at the CERN LHC, JINST 16 (2021), no. 05 P05014, [arXiv:2012.06888].DOI
  17. [17]ATLAS Collaboration, G. Aad et al., Search for light long-lived neutral particles that decay to collimated pairs of leptons or light hadrons in pp collisions at √s = 13 TeV with the ATLAS detector, JHEP 06 (2023) 153, [arXiv:2206.12181].DOI
  18. [18]CMS Collaboration, A. Hayrapetyan et al., Search for Light Pseudoscalar Bosons, Pair-Produced in Higgs Boson Decays in the Four-Electron Final State in Proton-Proton Collisions at √s = 13 TeV, Phys. Rev. Lett. 136 (2026), no. 18 181807, [arXiv:2511.19563].DOI
  19. [19]J. Alwall, R. Frederix, S. Frixione, V. Hirschi, F. Maltoni, O. Mattelaer, H. S. Shao, T. Stelzer, P. Torrielli, and M. Zaro, The automated computation of tree-level and next-to-leading order differential cross sections, and their matching to parton shower simulations, JHEP 07 (2014) 079, [arXiv:1405.0301].DOI
  20. [20]NNPDF Collaboration, R. D. Ball et al., Parton distributions from high-precision collider data, Eur. Phys. J. C 77 (2017), no. 10 663, [arXiv:1706.00428].
  21. [21]NNPDF Collaboration, R. D. Ball et al., Parton distributions with LHC data, Nucl. Phys. B 867 (2013) 244–289, [arXiv:1207.1303].
  22. [22]C. Bierlich et al., A comprehensive guide to the physics and usage of PYTHIA 8.3, SciPost Phys. Codeb. 2022 (2022) 8, [arXiv:2203.11601].arxiv.org/abs/2203.11601
  23. [23]P. Skands, S. Carrazza, and J. Rojo, Tuning PYTHIA 8.1: the Monash 2013 Tune, Eur. Phys. J. C 74 (2014), no. 8 3024, [arXiv:1404.5630].DOI
  24. [24]CMS Collaboration, A. M. Sirunyan et al., Measurement of the tt̄ production cross section using events with one lepton and at least one jet in pp collisions at √s = 13 TeV, JHEP 09 (2017) 051, [arXiv:1701.06228].DOI
  25. [25]CMS Collaboration, S. Chatrchyan et al., Description and Performance of Track and Primary-Vertex Reconstruction with the CMS Tracker, JINST 9 (2014), no. 10 P10009, [arXiv:1405.6569].DOI
  26. [26]G. Punzi, Sensitivity of searches for new signals and its optimization, eConf C030908 (2003) MODT002, [physics/0308063].DOI
  27. [27]CMS Collaboration, A. Hayrapetyan et al., The CMS statistical analysis and combination tool: Combine, Comput. Softw. Big Sci. 8 (2024) 19, [arXiv:2404.06614].DOI
  28. [28]G. Cowan, K. Cranmer, E. Gross, and O. Vitells, Asymptotic formulae for likelihood-based tests of new physics, Eur. Phys. J. C 71 (2011) 1554, [arXiv:1007.1727]. [Erratum: Eur.Phys.J.C 73, 2501 (2013)].DOI
  29. [29]CMS Collaboration, “The Phase-2 Upgrade of the CMS Endcap Calorimeter.” CERN-LHCC-2017-023, CMS-TDR-019, CERN CDS, 2017.DOI
  30. [30]L. Rygaard, J. Niedziela, and R. Schäfer, “ttalps.” https://github.com/kerstinlovisa/ttalps, 2023.
  31. [31]M. Bauer, M. Neubert, S. Renner, M. Schnubel, and A. Thamm, The Low-Energy Effective Theory of Axions and ALPs, JHEP 04 (2021) 063, [arXiv:2012.12272].DOI
  32. [32]M. Bauer, M. Neubert, S. Renner, M. Schnubel, and A. Thamm, Consistent Treatment of Axions in the Weak Chiral Lagrangian, Phys. Rev. Lett. 127 (2021), no. 8 081803, [arXiv:2102.13112].DOI

Paper details

vlnc:W_3jx3ekga
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 2

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents