betaFeedback

WorksPhysics and Astronomy

Are there type-III multiferroics?

Abstract

Multiferroics are known to be classified into two types. However, type-I lacks sufficient magnetoelectric coupling and type-II lacks sufficient electric polarization, making both practically difficult. In this work, we explore the possibility of type-III multiferroics, where the origins of ferroelectricity and magnetism are highly intertwined but not causally related, with a combination of strong magnetoelectric coupling and large polarization. Our first-principles calculations predict that monolayer TiCdO4_{4} is such a type-III ferroelectric-ferromagnetic multiferroics with both electronic and magnetic orders originating from competing electron populations on oxygen atoms. It shows an electric polarization of 50 μμC/m2^{2} while the maximum linear and quadratic magnetoelectric response are as high as 35000 ps/m and 1.59 ×\times 10−14^{-14} s/A, respectively. Our study opens up new perspectives for the discovery and design of much-anticipated multiferroics that can be used for cross-modulation.

Magnetoelectric multiferroics, which integrates ferroelectricity and magnetism, present remarkable potential for application in memory, data processing, and energy harvesting/conversion devices[1, 2]. These materials offer a cross-coupling pathway that enables electrically controlled magnetism or magnetically controlled ferroelectricity. Single-phase multiferroics are classified into two types based on the correlation between the ferroelectric and magnetic origins[3]. For type-I, the origins are mutually independent, leading to weak magnetoelectric coupling. A paradigmatic instance is BiFeO3\mathrm{BiFeO}_{3}, where ferroelectricity arises from the lone-pair electrons on Bi (6s26s^{2}) and magnetism originates from Fe-O hybridization[4, 5]. Despite having a large polarization of 50∼60 μC/cm250\sim60\,\mu\mathrm{C}/\mathrm{cm}^{2}, comparable to conventional ferroelectrics such as BaTiO3\mathrm{BaTiO}_{3}[6] and PbTiO3\mathrm{PbTiO}_{3}[7], its magnetoelectric coupling is limited to approximately 1 ps/m1\,\mathrm{ps}/\mathrm{m}[2, 8].

In contrast, type-II multiferroics derive their ferroelectricity from spin-induced inversion symmetry breaking, leading to strong magnetoelectric coupling, exemplified by TbMnO3\mathrm{TbMnO}_{3} (∼250 ps/m\sim250\,\mathrm{ps}/\mathrm{m}[9]) and TbMn2O5\mathrm{TbMn}_{2}\mathrm{O}_{5} (∼500 ps/m\sim500\,\mathrm{ps}/\mathrm{m}[10]). However, due to the dependence of ferroelectricity on magnetic ordering, the polarization is usually small, around 0.01 μC/cm20.01\,\mu\mathrm{C}/\mathrm{cm}^{2}, which is only one-thousandth of that observed in type-I multiferroics[11, 12, 13, 14, 15]. For practical applications, an ideal multiferroic material should have both a large polarization and a strong magnetoelectric coupling, yet neither type-I nor type-II can meet this requirement[16]. Consequently, there is a demand for a new type of multiferroics wherein the ferroelectric and magnetic origins are intricately intertwined, yet not causally related.

The pursuit of new multiferroics is also of great scientific interest. In quantum mechanics, charge and spin are two sides of a coin for electrons, and their mutual interactions rely on spin-orbit coupling. Ferroelectricity and magnetism are macroscopic charge and spin orders that break space-inversion and time-reversal symmetries, respectively. What kind of microscopic mechanism enables a strong coupling between the two macroscopic ferro-orders? From an academic point of view, the discovery of type-II multiferroics is a milestone in modern physics that has greatly advanced the fundamental understanding of the interplay between charge and spin orders.

In this work, first-principles calculations have identified monolayer TiCdO4\mathrm{TiCdO}_{4} as a multiferroic that does not fall into either type-I or type-II classifications. It features simultaneous d0d^{0}-ferroelectricity and d0d^{0}-ferromagnetism, both of which arise from competing electron populations on the four O atoms. As a result, on the one hand, it shows an electric polarization of 50 μC/cm2\mu\mathrm{C}/\mathrm{cm}^{2}, which is comparable to that of type-I multiferroics. On the other hand, the electron-population fluctuations on the O-atoms mediate a giant nonlinear magnetoelectric coupling, with maximum linear and quadratic responses reaching record αyx=35000\alpha_{yx}=35000 ps/m and βyzz=1.59×10−14\beta_{yzz}=1.59\times10^{-14} s/A. Based on these findings, we propose the type-III multiferroics, whose ferroelectric and magnetic origins are highly entangled, along with large electric polarization and strong magnetoelectric coupling. Our findings provide new insights into the search for and design of multiferroics with practical value, and thus ultimately magnetoelectric cross-modulation.

Density functional theory calculations were performed using the Vienna Ab initio Simulation Package (VASP)[17] with Perdew-Burke-Ernzerhof (PBE)[18] exchange-correlation functional and projector-augmented-wave (PAW) approach[19, 20]. To ensure the findings, the HSE06 functional[21] was further employed for structural relaxations and electronic structure calculations. The plane-wave cutoff energy was set to 600 eV. A 24×15×124\times15\times1 Monkhorst-Pack kk-mesh was used to sample the Brillouin zone. An 18 Å vacuum layer was added to minimize spurious interactions between the monolayer and its periodic images.

Van der Waals interactions were included in Grimme’s DFT-D3 scheme[22]. Lattice vectors and atomic positions were fully relaxed until the total energy and residual force converged to within 10−610^{-6} eV and 10−310^{-3} eV/Å, respectively. The phonon spectrum was computed using the finite displacement method in the PHONOPY code[23], which employs 4×4×14 \times4 \times1 supercells. Polarization was calculated within the Berry phase formalism[24]. The magnetoelectric response was obtained from first-principles calculations including spin-orbit coupling by tracking the polarization change under a uniform Zeeman field[25]. This scheme has been successfully applied to study the magnetoelectric effects of hexagonal rare-earth manganites and ferrites[26, 27].

Figure 1(a) presents the geometrical configuration of the high-symmetry TiCdO4\mathrm{TiCdO_4} monolayer, which can be viewed as half of the Ti in 1T1T-TiO2\mathrm{TiO_2} being substituted by Cd[28]. Although this substitution decreases the space group from P3ˉm1P\bar{3}m1 to P2/mP2/m, TiCdO4\mathrm{TiCdO_4} still retains an inversion symmetry centered on the transition-metal atoms. However, the corresponding phonon spectrum exhibits significant imaginary frequencies, suggesting that the structure is thermodynamically unstable.

Geometric configuration and corresponding phonon spectra of symmetric P2/m and ferroelectric P1 TiCdO4 monolayers

Figure 1. Geometric configuration and the corresponding phonon spectrum of (a) symmetric P2/mP2/m and (b) ferroelectric P1P1 TiCdO4_4 monolayer. A unit cell (black tetragonal) contains 4 O-atoms. The symmetric phase is centrosymmetric with respect to the metal atoms. Consequently, O1_1 and O4_4 are equivalent and are bonded to two Cd atoms and one Ti atom, while O2_2 and O3_3 are equivalent and are bonded to two Ti atoms and one Cd atom. Although the angle β\beta deviates slightly from 90° in the ferroelectric phase, for the sake of comparison, we have followed the same Brillouin-zone path as the symmetric phase throughout this work.

A stable low-symmetry TiCdO4\mathrm{TiCdO_4} is obtained after fully relaxing the lattice vectors and atomic positions. Its crystal structure and phonon spectrum are shown in Figure 1(b). Energetically, the spontaneous distortion reduces the system energy by 276 meV per formula. Structurally, the lattice constant a(b)a(b) shrinks (stretches) by 0.1(0.2) Å and the angle β\beta changes from 90 to 88∘88^\circ. The system no longer has any spatial symmetry and the space group is P1P1. Deformation in TiCdO4\mathrm{TiCdO_4} differs very much from the case of early-transition-metal substitution[29], where there is a significant out-of-plane displacement of the metal and a negligible displacement of skeleton O atoms. In contrast, both Ti/Cd and O atoms undergo large displacements in TiCdO4\mathrm{TiCdO_4}.

Inversion symmetry breaking gives an out-of-plane polarization of 33 μC/cm2\mu\mathrm{C}/\mathrm{cm^2} and an in-plane polarization of 5050 μC/cm2\mu\mathrm{C}/\mathrm{cm^2} along the (−0.94,−0.34,0)(-0.94, -0.34, 0) direction[30]. The polarization strength is comparable to that of type-I multiferroics such as BiFeO3\mathrm{BiFeO_3}[4], YMnO3\mathrm{YMnO_3}[31] and YbFeO3\mathrm{YbFeO_3}[32].

The stability of TiCdO4\mathrm{TiCdO_4} is further evaluated by estimating its formation energy using the formula

Ef=(ETiCdO4−μTi−μCd−2μO2)/6,(1)E_f = (E_{\mathrm{TiCdO_4}} - \mu_{\mathrm{Ti}} - \mu_{\mathrm{Cd}} - 2\mu_{\mathrm{O_2}})/6, \tag*{(1)}

where ETiCdO4E_{\mathrm{TiCdO_4}} is the total energy of distorted TiCdO4\mathrm{TiCdO_4}. μTi/μCd\mu_{\mathrm{Ti}}/\mu_{\mathrm{Cd}} and μO\mu_{\mathrm{O}} are the chemical potentials of hexagonal Ti/Cd crystals and gas-phase O2_2, respectively. It gives Ef=−1.44E_f=-1.44 eV. A negative EfE_f indicates that the production of TiCdO4_4 is exothermic and the reaction can proceed spontaneously.

Figure 2(a) compares the spin-resolved band structures of symmetric and ferroelectric TiCdO4_4. The former is a half-metal[33] with a spin-majority gap of 3.19 eV and a spin-minority metal. The latter is a half-semiconductor[34] with a spin-majority gap of 3.67 eV and a spin-minority gap of 0.57 eV. Evidently, spontaneous polarization is accompanied by a spin-minority metal-insulator transition.

Figure 2. (a) Spin-resolved band structures of symmetric (P2/mP2/m) and ferroelectric (P1P1) TiCdO4_4 monolayer. Blue solid and red dashed lines indicate the spin-majority and spin-minority channels, respectively. The black arrow denotes the minimum gap. (b) Total and projected density of states (PDOS) of symmetric (Top) and ferroelectric (Bottom) TiCdO4_4. (c) PDOS to the four O-atoms (See Figure 1) in the spin-minority channel for symmetric and ferroelectric phase, respectively. The Fermi levels are set to energy zero.

Electronic structure calculations give a total magnetic moment of 2 μB\mu_B for both symmetric and ferroelectric TiCdO4_4. The projected density of states depicted in Figure 2(b) show that O-2p always dominates near the Fermi energy, while the Ti-3d and Cd-4d states are located deeper in the conduction and valence bands, respectively. It is clear that the magnetic moments come mainly from the O-2p states. As a result, TiCdO4_4 displays unconventional d0d^0-magnetism[35, 36, 37], which has been extensively studied by the magnetism community, but has long been overlooked by the multiferroics community.

If one treats each unit cell as a magnetic entity, an energy comparison of the four different magnetic configurations depicted in Fig. S1[38] yields that both symmetric and ferroelectric TiCdO4_4 have a ferromagnetic ground state. The ferroelectric TiCdO4_4 has an in-plane easy magnetization axis with a magnetic anisotropy energy of 68 μ\mueV per formula with respect to the out-of-plane hard axis. This value is an order of magnitude higher than 1.4 μ\mueV of Fe[39], suggesting that TiCdO4_4 can overcome the thermal fluctuations and maintain long-range order.

We have carried out further structural relaxation and electronic structure calculations using the more accurate HSE06 functional to make sure that the discovery of ferroelectric-ferromagnetic multiferroics is not due to PBE. The results show that this holds true. The physics including spontaneous distortion, polarization and spin-minority metal-insulator transition remain unchanged (See the Supplementary Material for details[38]). The O-2pp states still dominate around the Fermi energy and contribute to the d0d^0-magnetism. The changes by HSE06 are quantitative. For example, the spin-minority gap of distorted TiCdO4_4 increases from 0.57 eV of PBE to 2.19 eV. Therefore, we continue our discussion based on PBE in the following.

Unambiguously, TiCdO4_4 is not a type-II multiferroic because its ferroelectricity arises from ionic displacements rather than spin structure. Unlike the usual displacive ferroelectrics where only the metal cations move off-center[40], here the anion O also shifts significantly reminding its key role in the structural distortion. Given that the spin-minority metal-insulator transition is also O-dominated, we further compare the spin-minority density of states of the four O atoms before and after the distortion in Figure 2(c). A notable change is that the distortion leads to an accumulation of electrons towards O1_1 and O2_2, making the two originally equivalent O atoms [O1_1 = O4_4 and O2_2 = O3_3, see also Figure 1(a)] no longer identical.

Figure 3 illustrates what we call a competing-electron-population mechanism to explain the multiferroics of TiCdO4_4. Ti/Cd has a valence electron configuration of 3d24s2/4d105s23d^24s^2/4d^{10}5s^2. When crystallized into TiCdO4_4, they lose 4 and 2 valence electrons to form Ti4+^{4+} and Cd2+^{2+}, respectively. For the four O-atoms, a total of eight electrons are required to make them all stable O2−^{2-}. In the “electron-deficient” environment where the metal provides only 6 electrons, the spin-majority orbitals of O are completely filled but the four spin-minority orbitals have to compete for the remaining 2 electrons. This results in a total magnetic moment of 2 μB\mu_B that is almost independent of atomic configuration. Yet, the local moment of each

Schematic diagram of TiCdO4 multiferroics

Figure 3. Schematic diagram of TiCdO4\mathrm{TiCdO}_{4} multiferroics induced by competing-electron-populations among OO-atoms. In a unit cell, the metal cations (Ti and Cd) provide a total of 6 electrons (I), which is not sufficient for all 4 OO-atoms to become stable O2−O^{2-}. The four spin-minority orbitals have to “compete” for 2 electrons (II), leading to a total magnetic moment of 2μB2 \mu_{\mathrm{B}} that is almost independent of the atomic configurations. However, the number of electrons “captured” by each OO-atom determines its local moment, which depends on the atomic configurations, e.g., symmetric (III) and ferroelectric (IV) cases. On the other hand, the partial occupation of four orbitals of similar energy by 2 electrons triggers a Jahn-Teller-like instability, which changes the metal-OO bond length and bond angle. Induced ionic shifts break the centrosymmetry with respect to the metal atoms, resulting in spontaneous ferroelectric polarization. Therefore, both the ferroelectricity and magnetism of TiCdO4\mathrm{TiCdO}_{4} originate from competing-electron-populations among OO-atoms. Application of an external magnetic field would cause a population fluctuation, which alters the metal-OO bonding and directly affects the electric polarization. Likewise, the application of an external electric field would change the electron population among OO-atoms, which alters the local moment on each OO-atom (Yellow dots in III and IV denote spin density isosurface of 0.02 e/A˚3\mathring{\mathrm{A}}^{3}) and the direction of the easy magnetization axis. As a result, TiCdO4\mathrm{TiCdO}_{4} exhibits strong magnetoelectric coupling that is largely independent of spin-orbit interaction.

O-atom depends on the number of electrons it “captures”. The “competitive population” of 2 electrons on four spin-minority orbitals of similar energy in turn triggers a Jahn-Teller-like instability. This leads to a change in the metal-O bonding (bond lengths and angles), which drives the ions to move and breaks the inversion symmetry. Therefore, both the ferroelectric and magnetic orders of TiCdO4\mathrm{TiCdO}_{4} originate from the competing-electron-population on the O-atoms, making it not a type-I multiferroic either.

As the ferroelectricity of TiCdO4\mathrm{TiCdO}_{4} is dd-electron independent, it is not surprising that it has the large polarization of conventional d0d^{0}-ferroelectrics. Meanwhile, high entanglement of the ferroelectric and magnetic orders naturally hints a strong magnetoelectric coupling. This is because applying an electric/magnetic field would induce fluctuations in the electron populations among the O-atoms, consequently changing the magnetic/electrical properties. To account for this quantitatively, we directly calculate the polarizations P\mathbf{P} under different applied Zeeman fields H\mathbf{H} and the results are summarized in Fig. S3[38]. Then, we use

Pi=αijHj+12βijjHjHj+⋯(2)P_i = \alpha_{ij}H_j + \frac{1}{2}\beta_{ijj}H_jH_j + \cdots \tag*{(2)}

to fit the linear and quadratic magnetoelectric coupling tensors

α=(8540−3470−610−3500029606330−162091302630) ps/m,(3)\boldsymbol{\alpha} = \begin{pmatrix} 8540 & -3470 & -610 \\ -35000 & 2960 & 6330 \\ -1620 & 9130 & 2630 \end{pmatrix}\ \mathrm{ps/m}, \tag*{(3)}

and

β=(−0.240.450.331.34−1.37−1.590.06−0.61−0.13)×10−14 s/A.(4)\boldsymbol{\beta} = \begin{pmatrix} -0.24 & 0.45 & 0.33 \\ 1.34 & -1.37 & -1.59 \\ 0.06 & -0.61 & -0.13 \end{pmatrix}\times10^{-14}\ \mathrm{s/A}. \tag*{(4)}

One can see that the minimum linear response ∣αxz∣=610\lvert\alpha_{xz}\rvert= 610 ps/m is larger than that of type-II multiferroics TbMnO3\mathrm{TbMnO}_{3}[9] and TbMn2O5\mathrm{TbMn}_{2}\mathrm{O}_{5}[10]. The maximum of ∣αyx∣=35000\lvert\alpha_{yx}\rvert= 35000 ps/m is a record, larger than other strong magnetoelectric multiferroics known to date, including Ba0.4Sr1.6Mg2Fe12O22\mathrm{Ba}_{0.4}\mathrm{Sr}_{1.6}\mathrm{Mg}_{2}\mathrm{Fe}_{12}\mathrm{O}_{22} (33000 ps/m)[11], Fe2Mo3O8\mathrm{Fe}_{2}\mathrm{Mo}_{3}\mathrm{O}_{8} (10000 ps/m)[41] and Ni3TeO6\mathrm{Ni}_{3}\mathrm{TeO}_{6} (1300 ps/m)[42]. The maximum quadratic response ∣βyzz∣=1.59×10−14\lvert\beta_{yzz}\rvert= 1.59\times10^{-14} s/A is also two orders of magnitude larger than that of CaMnO3\mathrm{CaMnO}_{3}[43]. It is worth noting that the P\mathbf{P}-H\mathbf{H} relation calculated without spin-orbit coupling, as well as the derived α\boldsymbol{\alpha} and β\boldsymbol{\beta}, remain almost unchanged. This implies that the microscopic mechanism dominating the giant magnetoelectric coupling in TiCdO4_4 is not spin-orbit coupling, which indirectly supports the electron-population-fluctuation mechanism shown in Figure 3.

Typically, the linear magnetoelectric response includes contributions from electrons (αije\alpha_{ij}^{e}) and lattice (αijl\alpha_{ij}^{l}) [44]. In order for a deeper understanding of the magnetoelectric coupling in TiCdO4_4, we calculate αije\alpha_{ij}^{e} and αijl\alpha_{ij}^{l} separately (See the Supplementary Material for details [38]). With ∣αyx∣\lvert\alpha_{yx} \rvert maximal, we give representatively in Figure 4 the total and decomposed changes in PyP_y under the application of HxH_x. It can be seen that the αyxl\alpha_{yx}^{l} is approximately three times that of the αyxe\alpha_{yx}^{e}. Moreover, the αijl\alpha_{ij}^{l} can be decomposed as [27]

Total variation of the polarization in the $y$ direction with applied magnetic fields in the $x$ direction, and decomposition into separate contributions from the lattice and electrons

Figure 4. Total variation of the polarization in the yy direction (ΔPy\Delta P_y) with applied magnetic fields in the xx direction (HxH_x), and decomposition into separate contributions from the lattice and electrons. The points are calculated directly from first-principles (See the Supplementary Material for details), while the lines are guides to the eye.

αijl=∂Pi∂um⋅∂um∂Fn⋅∂Fn∂Hj=Ω0−1Zmie⋅Kmn−1⋅μ0Znjm,(5)\alpha_{ij}^{l} = \frac{\partial P_i}{\partial u_m} \cdot\frac{\partial u_m}{\partial F_n} \cdot\frac{\partial F_n}{\partial H_j} = \Omega_0^{-1} Z_{mi}^{e} \cdot K_{mn}^{-1} \cdot\mu_0 Z_{nj}^{m}, \tag*{(5)}

where mm and nn are directions, and Ω0\Omega_0 is the unit cell volume. The three terms on the right-hand side measure the ability to induce polarization with the same ionic displacement, the ability to induce ionic displacement with the same force, and the ability to generate force with the same magnetic field. Traditionally, they are notated as the Born effective charge (ZeZ^{e}), the inverse of the force constant (K−1K^{-1}) and the magnetic charge (ZmZ^{m}). Compared to the prototypical multiferroic Cr2_{2}O3_{3}[25, 45], the ∣αyx∣|\alpha_{yx}| of TiCdO4_{4} increases by about four orders of magnitude. Our decomposition calculations of Eq. (5) show that ZeZ^{e} is almost unchanged, K−1K^{-1} increases by a factor of four, and ZmZ^{m} increases by three orders of magnitude. Unambiguously, the giant magnetoelectric response of TiCdO4_{4} originates from its huge ZmZ^{m}.

In summary, we have identified by first-principles calculations that the monolayer TiCdO4_{4} is a ferroelectric-ferromagnetic multiferroics, which does not belong to the traditional type-I or type-II classification. Its ferroelectric and magnetic origins are highly intertwined, both originating from the competing-electron-population among O-atoms under an “electron-deficient” environment. This enables an integration of the large electric polarization of type-I and the strong magnetoelectric coupling of type-II, two necessary requirements for the multiferroic applications. We therefore classify it as a type-III multiferroic, which is expected to facilitate the search for and design of multiferroics that can ultimately achieve cross-control between ferroelectricity and magnetism.

Some useful insights can be gained from TiCdO4_{4} about which materials might be type-III multiferroics. It combines d0d^{0}-ferroelectricity and d0d^{0}-magnetism. It is well known that d0d^{0}-ferroelectrics are sufficiently polarized, and that d0d^{0}-magnetism emerges when the 2p orbitals of C, N or O are not completely filled. Since the 2p orbitals are more extended than the 3d ones, they behave more “softly” in the presence of an external field (e.g., TiCdO4_{4} under a magnetic field and organometallic wires under an electric field[46]), resulting in a larger response. In addition, there is usually more than one anion in the unit cell, so d0d^{0}-magnet can host an internal magnetic structure. Modulation of this magnetic structure by an external field can produce a rich variety of magnetoelectric effects.

This work was supported by the Ministry of Science and Technology of China (Grant Nos. 2023YFA1406400 and 2020YFA0308800), the National Natural Science Foundation of China (Grant No. 12474064), and NSAF (Grant No. U2330401). performed using the QUANTUM ESPRESSO[47] package. Meanwhile, the thickness of the monolayer is assumed to be 2 Å.

References

  1. [1]N. A. Spaldin and M. Fiebig, The renaissance of magnetoelectric multiferroics, Science 309, 391-392 (2005).pubmed.ncbi.nlm.nih.gov/16020720
  2. [2]W. Eerenstein, N. D. Mathur, and J. F. Scott, Multiferroic and magnetoelectric materials, Nature 442, 759 (2006).
  3. [3]D. Khomskii, Classifying multiferroics: mechanisms and effects, Physics 2, 20 (2009).DOI
  4. [4]J. Wang, J. B. Neaton, H. Zheng, V. Nagarajan, S. B. Ogale, B. Liu, D. Viehland, V. Vaithyanathan, D. G. Schlom, U. V. Waghmare et al., Epitaxial BiFeO₃ multiferroic thin film heterostructures, Science 299, 1719 (2003).pubmed.ncbi.nlm.nih.gov/12637741
  5. [5]P. Ravindran, R. Vidya, A. Kjekshus, H. Fjellvåg, and O. Eriksson, Theoretical investigation of magnetoelectric behavior in BiFeO₃, Phys. Rev. B 74, 224412 (2006).
  6. [6]W. J. Merz, Double Hysteresis Loop of BaTiO₃ at the Curie Point, Phys. Rev. 91, 513 (1953).DOI
  7. [7]R. Nishino, T. C. Fujita, F. Kagawa, and M. Kawasaki, Evolution of ferroelectricity in ultrathin PbTiO₃ films as revealed by electric double layer gating, Sci. Rep. 10, 10864 (2020).DOI
  8. [8]C. Ederer and N. A. Spaldin, Weak ferromagnetism and magnetoelectric coupling in bismuth ferrite, Phys. Rev. B 71, 060401(R) (2005).DOI
  9. [9]T. Kimura, T. Goto, H. Shintani, K. Ishizaka, T. Arima, and Y. Tokura, Magnetic control of ferroelectric polarization, Nature 426, 55-58 (2003).pubmed.ncbi.nlm.nih.gov/14603314
  10. [10]N. Hur, S. Park, P. A. Sharma, J. S. Ahn, S. Guha, and S-W. Cheong, Electric polarization reversal and memory in a multiferroic material induced by magnetic fields, Nature 429, 392-395 (2004).pubmed.ncbi.nlm.nih.gov/15164057
  11. [11]K. Zhai, Y. Wu, S. Shen, W. Tian, H. Cao, Y. Chai, B. C. Chakoumakos, D. Shang, L. Yan, F. Wang et al., Giant magnetoelectric effects achieved by tuning spin cone symmetry in Y-type hexaferrites, Nat. Commun. 8, 519 (2017).DOI
  12. [12]H. J. Xiang, S-H. Wei, M.-H. Whangbo, and J. L. F. Da Silva, Spin-orbit coupling and ion displacements in multiferroic TbMnO₃, Phys. Rev. Lett. 101, 037209 (2008).DOI
  13. [13]N. Lee, C. Vecchini, Y. J. Choi, L. C. Chapon, A. Bombardi, P. G. Radaelli, and S.W. Cheong, Giant tunability of ferroelectric polarization in GdMn₂O₅, Phys. Rev. Lett. 110, 137203 (2013).pubmed.ncbi.nlm.nih.gov/23581365
  14. [14]Y. Tokunaga, S. Iguchi, T. Arima, and Y. Tokura, Magnetic-field-induced ferroelectric state in DyFeO₃, Phys. Rev. Lett. 101, 097205 (2008).pubmed.ncbi.nlm.nih.gov/18851654
  15. [15]B. Rajeshwaran, D. I. Khomskii, A. K. Zvezdin, C. N. Rao, and A. Sundaresan, Field-induced polar order at the Néel temperature of chromium in rare-earth orthocromites: Interplay of rare-earth and Cr magnetism, Phys. Rev. B 86, 214409 (2012).
  16. [16]S. Dong, J.-M. Liu, S.-W. Cheong, and Z. Ren, Multiferroic materials and magnetoelectric physics: symmetry, entanglement, excitation, and topology, Adv. Phys. 64, 519-626 (2015).DOI
  17. [17]G. Kresse and J. Furthmüller, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Phys. Rev. B 54, 11169-11186 (1996).pubmed.ncbi.nlm.nih.gov/9984901
  18. [18]J. P. Perdew, K. Burke, and M. Ernzerhof, Generalized Gradient Approximation Made Simple, Phys. Rev. Lett. 77, 3865-3868 (1996).pubmed.ncbi.nlm.nih.gov/10062328
  19. [19]P. E. Blöchl, Projector augmented-wave method, Phys. Rev. B 50, 17953-17979 (1994).pubmed.ncbi.nlm.nih.gov/9976227
  20. [20]G. Kresse and D. Joubert, From ultrasoft pseudopotentials to the projector augmented-wave method, Phys. Rev. B 59, 1758-1775 (1999).DOI
  21. [21]J. Heyd, G. E. Scuseria, and M. Ernzerhof, Hybrid functionals based on a screened Coulomb potential, J. Chem. Phys. 118, 8207-8215 (2003).DOI
  22. [22]S. Grimme, J. Antony, S. Ehrlich, and H. Krieg, A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu, J. Chem. Phys. 132, 154104 (2010).DOI
  23. [23]A. Togo and I. Tanaka, First principles phonon calculations in materials science, Scr. Mater. 108, 1-5 (2015).arxiv.org/abs/1506.08498
  24. [24]R. D. King-Smith and D. Vanderbilt, Theory of polarization of crystalline solids, Phys. Rev. B 47, 1651-1654 (1993).pubmed.ncbi.nlm.nih.gov/10006189
  25. [25]E. Bousquet, N. A. Spaldin, and K. T. Delaney, Unexpectedly Large Electronic Contribution to Linear Magnetoelectricity, Phys. Rev. Lett. 106, 107202 (2011).pubmed.ncbi.nlm.nih.gov/21469827
  26. [26]M. Ye and D. Vanderbilt, Dynamical magnetic charges and linear magnetoelectricity, Phys. Rev. B 89, 064301 (2014).DOI
  27. [27]M. Ye and D. Vanderbilt, Magnetic charges and magnetoelectricity in hexagonal rare-earth manganites and ferrites, Phys. Rev. B 92, 035107 (2015).DOI
  28. [28]X. Bu, H. Liu, and Y. Li, Stable phases of freestanding monolayer TiO₂: Emergence of out-of-plane ferroelectricity, Phys. Rev. B 109, 165435 (2024).DOI
  29. [29]H. Wang, H. Liu, and Y. C. Li, Ferroelectric-ferromagnetic multiferroicity driven by 3d-electrons in a TiCrO₄ monolayer, J. Mater. Chem. C 12, 18917-18924 (2024).
  30. [30]Given that the high-symmetry phase exhibits metallicity, the Berry phase calculations were B. B. Van Aken, T. T. Palstra, A. Filippetti, and N. A. Spaldin, The origin of ferroelectricity in magnetoelectric YMnO₃, Nat. Mater. 3, 164-170 (2004).
  31. [32]Y. K. Jeong, J. H. Lee, S. J. Ahn, S. W. Song, H. M. Jang, H. Choi, and J. F. Scott, Structurally tailored hexagonal ferroelectricity and multiferroism in epitaxial YbFeO₃ thin-film heterostructures, J. Am. Chem. Soc. 134, 1450-1453 (2012).DOI
  32. [33]Y. C. Li, G. Zhou, J. Li, J. Wu, B.-L. Gu, and W. H. Duan, Ab initio study of half-metallicity and magnetism of complex organometallic molecular wires, J. Phys. Chem. C 115 7292-7297 (2011).DOI
  33. [34]X. Li and J. Yang, First-principles design of spintronics materials, Natl. Sci. Rev. 3, 365-381 (2016).DOI
  34. [35]J. M. D. Coey, d⁰ ferromagnetism, Solid State Sci. 7, 660-667 (2005).DOI
  35. [36]H. Pan, J. B. Yi, L. Shen, R. Q. Wu, J. H. Yang, J. Y. Lin, Y. P. Feng, J. Ding, L. H. Van, and J. H. Yin, Room-temperature ferromagnetism in carbon-doped ZnO, Phys. Rev. Lett. 99, 127201 (2007).pubmed.ncbi.nlm.nih.gov/17930547
  36. [37]P. Dev, Y. Xue, and P. H. Zhang, Defect-induced intrinsic magnetism in wide-Gap III nitrides, Phys. Rev. Lett. 100, 117204 (2008).
  37. [38]See the Supplementary Material for more details of the ground-state magnetic configuration, the HSE06 results and the polarization change with applied Zeeman fields.
  38. [39]S. V. Halilov, A. Y. Perlov, P. M. Oppeneer, A. N. Yaresko, and V. N. Antonov, Magnetocrystalline anisotropy energy in cubic Fe, Co, and Ni: Applicability of local-spin-density theory reexamined, Phys. Rev. B 57, 9557-9560 (1998).DOI
  39. [40]H. X. Tan, M. L. Li, H. T. Liu, Z. R. Liu, Y. C. Li, and W. H. Duan, Two-dimensional ferromagnetic-ferroelectric multiferroics in violation of the d⁰ rule, Phys. Rev. B 99, 195434 (2019).DOI
  40. [41]Y. Wang, G. L. Pascut, B. Gao, T. A. Tyson, K. Haule, V. Kiryukhin, and S-W. Cheong, Unveiling hidden ferrimagnetism and giant magnetoelectricity in polar magnet Fe₂Mo₃O₈, Sci. Rep. 5, 12268 (2015).DOI
  41. [42]Y. S. Oh, S. Artyukhin, J. J. Yang, V. Zaf, J. W. Kim, D. Vanderbilt, and S-W. Cheong, Non-hysteretic colossal magnetoelectricity in a collinear antiferromagnet, Nat. Commun. 5, 3201 (2014).
  42. [43]E. Bousquet and N. Spaldin, Induced magnetoelectric response in Pnma perovskites, Phys. Rev. Lett. 107, 197603 (2011).
  43. [44]J. Íñiguez, First-principles approach to lattice-mediated magnetoelectric effects, Phys. Rev. Lett. 101, 117201 (2008).DOI
  44. [45]D. N. Astrov, The magnetoelectric effect in antiferromagnetics, Sov. Phys–JETP 11, 708 (1960)
  45. [46]J. Liu, G.-B. Liu, and Y. C. Li, Electric-field-driven excitonic instability in an organometallic manganese-cyclopentadienyl wire, Phys. Rev. B 104, 085150 (2021).DOI
  46. [47]P. Giannozzi, O. Andreussi, T. Brumme, O. Bunau, M. B. Nardelli, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, M. Cococcioni et al., Advanced capabilities for materials modelling with QUANTUM ESPRESSO, J. Phys.: Condens. Matter 29, 465901 (2017).

Paper details

vlnc:W_3k99exe5
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents