WorksPhysics and Astronomy
Ab initio calculations of monopole sum rules: From finite nuclei to infinite nuclear matter
Abstract
We compute moments of the isoscalar monopole response of N = Z closed-shell nuclei based on chiral nucleon-nucleon plus three-nucleon interactions. We employ the random phase approximation (RPA) and two ab initio many-body approaches, the in-medium similarity renormalization group (IMSRG) and coupled-cluster theory (CC). In the IMSRG framework, the moments are obtained as ground-state expectation values, whereas in the CC approach, they are evaluated through excited-state calculations. We find good agreement between the IMSRG and CC results across all nuclei studied. RPA provides a reasonable approximation to the correlated methods if the interaction is soft. From the calculated moments, we extract average energies of the monopole response, compute finite-nucleus incompressibilities, and estimate the incompressibility of symmetric nuclear matter by a fit to a leptodermous expansion. Our extrapolated values are lower than those obtained in nuclear matter calculations with the same interactions, but the values are consistent with phenomenological ranges.
Introduction
The investigation of giant resonances offers deep insights into the structure and dynamical properties of atomic nuclei [1, 2, 3, 4]. In particular, isoscalar giant monopole resonances (ISGMR, or GMR for short) represent a signature of collective nuclear vibrations while also establishing a direct connection between atomic nuclei and the nuclear equation of state (EOS). Moments of the monopole strength function can be related to compression properties of finite nuclei [3, 5, 6], and, through a leptodermous expansion, to the incompressibility of infinite nuclear matter at saturation density, a key EOS property. Through the incompressibility, these resonances thus provide constraints for matter under extreme conditions in neutron stars, core-collapse supernovae, and neutron star mergers [7, 8, 9, 10, 11, 12, 13]. For example, larger values of the incompressibility typically lead to stiffer EOSs.
A microscopic understanding of the response of nuclei to external probes, and of the GMR in particular, has been a longstanding challenge in nuclear structure studies. While historically this was studied predominantly using phenomenological energy density functionals (EDFs) [2, 3, 4, 14, 15, 16, 17, 18, 19], ab initio advances allow to target such observables from first principles using nuclear interactions (and currents) systematically derived from chiral effective field theory [20, 21, 22, 23]. Combined with systematically improvable many-body expansions this allows to assess theoretical uncertainties. Among these advances for nuclear responses are the Lorentz integral transform technique combined with the coupled-cluster framework (LIT-CC) [24, 25, 26, 27, 28, 29], the self-consistent Green’s function approach [31] [30], and the in-medium similarity renormalization group (IMSRG) [32, 33, 34]. More recently, response functions have also been addressed within a time-dependent coupled-cluster framework [35].
Efforts to implement the random-phase approximation (RPA) using the same chiral interactions employed in ab initio methods have been carried out within symmetry-conserving schemes [36, 37, 38], and later extended to deformed nuclei through the symmetry-breaking quasiparticle RPA [39, 40], highlighting the influence of static correlations. In addition, RPA and related methods constructed on correlated ground states have stressed the need for a consistent treatment of correlations in both ground and excited configurations [39, 41]. Lastly, the projected generator coordinate method (PGCM) and its perturbatively corrected extension (PGCM-PT) have been formulated to describe rotational and vibrational collective degrees of freedom within a unified framework [42, 43, 44, 45, 46, 47, 48].
In this work, we present LIT-CC and IMSRG calculations of the monopole strength function and its moments. On the one hand, within the LIT-CC method, the response function is explicitly constructed from a set of excited states obtained from an equation-of-motion (EOM) approach [49]. On the other hand, a newly developed approach in the IMSRG framework allows to evaluate selected moments of the strength function as ground-state expectation values [34]. In the first part of the paper, we focus on moments of the monopole response and compare the results of the two approaches. Both the CC and IMSRG frameworks have been shown to accurately predict ground- and excited-state properties of nuclei at comparable accuracy, see, e.g., [33, 50, 51]. In this work we demonstrate that this consistency extends to collective excitations as well. IMSRG and CC results are also compared to RPA calculations.
In the second part of the paper, we analyze the connection between properties of the monopole response and the incompressibility of nuclear matter. In particular, we calculate the finite-nucleus incompressibility, and use a leptodermous expansion to extract the nuclear matter value. The extrapolated values are lower than those obtained in nuclear matter calculations with the same interactions, but the values are consistent with phenomenological ranges.
This paper is organized as follows. In Secs. II and III, the many-body frameworks used to calculate the nuclear response and its moments are introduced. Results are presented for selected closed-shell nuclei in Sec. IV. In § 1.4, the extrapolated results for the incompressibility are compared to nuclear matter calculations. Finally, we summarize our results and give an outlook in Sec. VI. Further numerical benchmarks are given in the Appendix.
The nuclear response
Strength functions and their moments
In the following the nuclear Hamiltonian
is employed, where is the total kinetic energy, the center-of-mass (CM) kinetic energy, denotes nucleon-nucleon (NN) and three-nucleon (3N) interactions. The set of the eigenstates of the Hamiltonian is denoted by , each of which satisfies the time-independent Schrödinger equation
Given a Hermitian operator , the associated strength function (or response function) reads as
which fully characterizes the linear response of the nucleus to an external perturbation . The moments of the response function are defined as energy-weighted averages of the transition amplitudes entering Eq. (3) according to
If has a non-vanishing expectation value in the ground state, the elastic contribution to the total strength is subtracted by replacing with . Different moments may be used to compactly characterize the response of the system. In particular, several average energies can be introduced as
These average energies obey a series of inequalities
If the entire strength were concentrated in a single peak, the equality sign in Eq. (7) would hold. The spread of the different averages in Eqs. (5) is a quantitative measure of the fragmentation of the strength . Note that the evaluation of Eq. (4) formally requires the knowledge of the entire spectrum of , i.e., one needs access to all the bound and continuum excited states of the system . In this work, two strategies that are theoretically equivalent, though potentially different in practical implementation, are employed to calculate the moments, as explained below.
Moments as ground-state expectation values
Equation (4) can be rewritten in terms of the expectation value on the ground state ,
where the so-called moment operator is
The latter is defined through a -fold nested commutator involving the full nuclear Hamiltonian [52]. Here, we used the relation
together with the completeness relation
By further exploiting the Hermiticity of the operator, odd moments can be written as
The explicit expression for the lowest- moments are given by
The former discussion is, in principle, valid for any integer value of , either positive or negative. However, negative values of require the definition of an inverse operation for the commutator, which in turn requires the knowledge of the exact spectrum of . However, negative moments can also be evaluated in terms of polarizabilities, which can be easily shown employing first-order perturbation theory (dielectric theorem) [52, 53]. Eventually, the following formulas are found
where
and is the solution to the perturbed Schrödinger equation
with the perturbation parameter. As displayed by Eqs. (13), a perturbation of order produces first-order changes in the expectation value of the perturbation operator itself, while second-order changes are obtained in the energy. Hence, in the evaluation of derivatives entering Eqs. (13), Eq. (13a) is considered to be numerically more robust.
Moments from integral transforms
To avoid the explicit calculation of bound and continuum excited states of the Hamiltonian, one can choose to adopt the LIT method that is based on an integral transform of the strength function with Lorentzian kernel [54],
where is the centroid and is the width of the kernel. By inserting Eq. (3) into Eq. (20) and using the completeness relation from Eq. (11) one obtains
Defining the complex variable , the integral transform can then be computed as
where represents the solution to the equation
for different values of and . In this way, the task of computing the full spectrum of the Hamiltonian is reduced to solving a Schrödinger-like equation (23), for which bound-state approaches can be applied. Ultimately, the moments of the strength function are evaluated in the limit , where the Lorentzian kernel approaches a Dirac -distribution. In this limit, the LIT reduces to the strength function
Such a strength function is discretized, in the sense that the information related to the excited states in the continuum is represented by bound pseudo-states, and it allows for the evaluation of moments via
Many-body frameworks
Moment operators from the IMSRG
In the IMSRG framework [55, 56] the initial Hamiltonian is evolved via a continuous unitary transformation parametrized by a flow parameter . This aims for the decoupling of -particle--hole (-) excitations from a many-body reference state,
The transformation can be reformulated as an ordinary differential equation involving the evaluation of a commutator between two many-body operators,
where is the (anti-Hermitian) generator of the transformation
In this work the generator is chosen as the imaginary-time generator, which is widely used in applications to closed-shell nuclei.
The initial many-body reference state is taken to be a symmetry-conserving Hartree-Fock (HF) Slater determinant. All operators are then normal ordered with respect to , such that the zero-body component of the Hamiltonian after normal ordering is given by its expectation value . Through the solution of the IMSRG flow the coupling of to - excitations is suppressed, and the zero-body term approaches the exact ground-state energy in the large limit when the IMSRG equations are not truncated:
In this work, the Magnus formulation of the unitary transformation is used [57], where the latter is directly expressed by an exponential ansatz
This has the advantage of manifestly enforcing unitarity even in presence of truncations. All commutators are truncated at the normal-ordered two-body level giving rise to the IMSRG(2) truncation. While three-body operators can be included at a substantial computational cost, the IMSRG(2) approximation has been shown to yield reliable results for ground-state properties of medium-mass nuclei [51].
With this, the transformed Hamiltonian, as well as any other operator , can be constructed as
This also extends to the moment operators defined in Eqs. (12), such that the moments expectation value at the HF and IMSRG level are given by
respectively. Thus, differences in the value of before (HF) and after (IMSRG) the flow reflect the impact of ground-state correlations on the nuclear response.
Integral transforms in coupled-cluster theory
In CC theory [49, 58] one starts from an exponential ansatz for the many-body ground state,
Correlations are introduced through , where the cluster operator is expanded in a truncated - operator basis. In the singles and doubles level (CCSD) approximation, the cluster operator consists of
where and are creation and annihilation operators, while the indices and denote hole and particle states, respectively. After normal ordering the Hamiltonian with respect to the reference state, one introduces the similarity-transformed Hamiltonian
and computes the amplitudes by solving a set of non-linear amplitude equations
which decouple particle-hole excitations from the reference state . Additional higher-body correlations can be approximately included to achieve greater precision, using, e.g., the CCSDT-1 approach [59], which accounts for the leading effects of three-particle–three-hole excitations in the nuclear ground state.
In the CC framework, excited states can be described through EOM techniques [49, 58]. Since similarity transformed operators in CC theory are non-Hermitian [58], both the right and left ground states are required. Assuming that the general eigenstates of the Hamiltonian can be constructed by acting linearly on the CC ground state with an excitation operator, the right and left eigenstates can be written as
Truncating and at the 2p-2h level yields the following operators
In the special case of the nuclear ground state , the amplitudes reduce to and . Using the EOM ansatz Eqs. (33), we can finally rewrite the strength function in the CC formalism as
where the similarity-transformed transition operator
was introduced. Starting from Eq. (43), one can evaluate moments by coupling CC theory with the LIT technique of Sec. II C in the so-called LIT-CC method [24, 25]. In this approach, Eq. (23) becomes an EOM-CC problem with a source term.
Applications to finite nuclei
In this work, we focus on the isoscalar monopole (IS0) response, whose excitation operator reads
where is the radial component of the position of the -th particle in the laboratory frame.
Computational setup
In this work, we study the nuclear response for two different chiral NN and 3N interactions: the NNLO interaction from Ref. [60] and the NNLO (394) interaction from Ref. [61]. All operators are expanded in spherical harmonic-oscillator (HO) basis states consisting of at most 15 major shells, i.e., . Three-nucleon interactions are included using the normal-ordered two-body approximation. This has been shown to introduce only small errors in medium-mass nuclei [51, 62, 63]. The number of three-body configurations is additionally restricted to which has been shown to be sufficient to ensure convergence in heavy systems [64]. The underlying HO frequency is taken in a range – MeV. The NN and 3N matrix elements are computed using the NuHamil code [65].
In the following, the moments of the isoscalar monopole strength for are evaluated for doubly closed-shell nuclei , , , and . The IMSRG results are obtained by employing the ground-state-based technique described in Sec. II B in the IMSRG(2) approximation. CC calculations, instead, exploit the excited-states formulation, as discussed in Sec. II C. In the latter framework, many-body truncations are performed at both the ground- and excited-state level. Unless otherwise specified, in both cases we adopt the CCSD approximation. For comparison, results from RPA calculations are also presented.
Isoscalar monopole moments convergence
We start by presenting the results relative to the moments of the IS0 operator for the different many-body methods and Hamiltonians as a function of the HO basis size and frequency. In Figure 1 the values of are displayed. One can easily observe a striking difference between the two interactions. Results obtained with NNLO display a slower convergence with respect to , a stronger dependence on the selected , and on the many-body method employed. RPA results, for instance, do not display a clear sign of convergence. IMSRG and CC results, which quantitatively agree with each other, show a better convergence, despite a significant dependence for the heaviest systems considered: relative differences amount to 13% and 19% in CC and IMSRG calculations, respectively. The situation is drastically different for the NNLO (394) results. IMSRG, CC, and RPA results display relative deviations of only 3%. This shows that correlations encoded in IMSRG and CC results are effectively cancelled for this observable with soft interactions, as suggested in previous works [39]. In this specific situation, RPA can serve as a sufficiently good first approximation. Moreover, we observe that the model-space convergence is significantly improved for the soft interaction NNLO (394), with a relative difference ranging from 1% to 3% in and of the order of 5% for variations even in heavier systems.
Figure 1. Values of for the isoscalar monopole (IS0) response for RPA (left), IMSRG (middle), and CC (right) calculations. Results are given for two different interactions (NNLOsat [60], NNLOGO [61]) for MeV as a function of the model space size . Absolute values are rescaled by a factor in order to show all nuclei on the same scale.
A similar situation is found when discussing the results for , which are shown in Figure 2. When employing the NNLO interaction both the many-body and the model-space uncertainty are significantly larger. It is interesting to remark that in this case one also observes a non-negligible difference between the CC and IMSRG results, which increases for heavier nuclei. This difference is of about 20% in (while only of 3% in ). One possible explanation relates to the more difficult convergence even of moments than odd ones, also observed in Refs. [34, 66]. Moreover, we emphasize that in this case describes the variance of the mean-square radius operator. The latter depends on the quality of the ground state of the system, and as a consequence on the many-body convergence of the solution, which can be strongly affected by the use of a harder interaction such as NNLO. To further elucidate this, we considered the inclusion of triples correction in the ground state for CC calculations. Due to computational cost, we limited this analysis to with and MeV. Even though this value is too small to reach convergence, we observe that the contribution of 3p-3h excitations improves the comparison with IMSRG(2) results. The moment increases from 3040 fm to 3160 fm, reducing the difference with the IMSRG(2) result of 3630 fm from 17% to 13% in . IMSRG(3) corrections have been found to be small for this quantity [67]. As already observed for , the use of the NNLO (394) interaction largely reduces the uncertainty of associated to the model-space convergence, of the order of 1% or smaller for and from 1% to 3% for variations, and the spread between the three different methods, lying always below 5%.
Figure 2. Values of for the isoscalar monopole (IS0) response for RPA (left), IMSRG (middle), and CC (right) calculations. Results are given for two different interactions (NNLO [60], NNLOGO (394) [61]) for MeV as a function of the model space size . Absolute values are rescaled by a factor in order to show all nuclei on the same scale.
The convergence pattern of does not differ significantly from the previously discussed cases, with much better convergence achieved for the softer NNLO (394) interaction than with NNLO. This is shown in the Appendix for completeness.
Average energies
As discussed in Sec. II A, ratios of the isoscalar monopole moments can be used to estimate the average energy of the GMR . Since this will enter the finite-nuclei incompressibility, we define as
Theoretical predictions for are displayed in Figure 3. A good agreement between the IMSRG and CC calculations is observed across all nuclei. The NNLOGO (394) interaction appears to favor larger values for with respect to NNLOsat. Results from NNLOGO (394) lie between 7% and 9% (5% and 7%) higher than the NNLOsat values for IMSRG (CC) calculations. Also, we notice that average energies exhibit faster convergence compared to the individual moments, even in the case of the harder NNLOsat interaction. Since is obtained as a ratio, systematic uncertainties cancel out in the resulting values. Differences between the two interactions are less pronounced in IMSRG and CC than in RPA. The latter displays the same behavior observed for the individual moments: while it provides a sufficiently good approximation to the correlated IMSRG and CC results for the softer NNLOGO (394) interaction, it systematically underpredicts them for NNLOsat.
Figure 3. Average energy for the isoscalar monopole (IS0) response for RPA (left), IMSRG (centre) and CC (right) calculations. Results are given for two different interactions (NNLO [60], NNLO (394) [61]) for the HO basis frequencies MeV as a function of the model space size .
For , , and , experimental data for the monopole response and average energies are available, allowing for a comparison with the theoretical predictions, see Table I. In Table I we list the experimental average energies, defined according to Eq. (46), taken from Ref. [68] for and from Ref. [69] for . For , we include the experimental value from Ref. [70], which however corresponds to the centroid energy . The IMSRG and CC results presented in Table I are obtained as follows. The central values are the average of the results for the two different HO frequencies at the largest model-space truncations used for each method. The quoted uncertainty is the standard deviation among four values, corresponding to the two largest truncations and the two different , thereby reflecting the residual dependence on the model-space parameters. We emphasize that this uncertainty does not include the Hamiltonian or
Table 1. IMSRG and CC predictions for the average energies of O, Ca, Ni, and Sn with the NNLO and NNLOGO (394) interactions, in comparison to the experimental data of Ref. [68, 69, 70]. Note that experimental data are only available in limited excitation energy ranges, see text for details. All results are given in MeV.
EFT truncation uncertainty and also not the many-body uncertainty.
Overall, the theoretical predictions for are systematically larger than the experimental values for both many-body methods and interactions, with NNLO being closer to experiment. In particular, the NNLO results overlap with the experimental centroid energy for Ni. It is worth noting that the experimental determination of is based on monopole strength distributions measured over finite excitation-energy ranges: 11–40 MeV for O [68], 7.5–28.8 MeV for Ca [69], and 0–40 MeV for Ni [70]. Since () is most sensitive to the low- (high-) energy part of the spectrum, truncating the integration range at low (high) energies can lead to an underestimation of the average energy.
This assumption can be tested within the CC framework, where the integration limits in Eq. (25) can be adjusted to match the experimental intervals. Focusing on O and Ca with the NNLO interaction, the average energy values are 19.93(15) MeV and 18.3(3) MeV, respectively. In both cases, the theoretical values move closer to experiment, with the result for O becoming fully consistent with data.
Infinite matter incompressibility
Extensive studies exist linking giant monopole resonances to the incompressibility of symmetric nuclear matter, see Refs. [3, 5, 6, 71] for reviews. In infinite matter, the incompressibility is defined by the second derivative of the energy per particle with respect to the Fermi momentum
where is the Fermi momentum at the saturation density , which is defined by the stationarity condition
Equation (47) provides information about the stiffness of nuclear matter against variations in the density around the stationary point. We introduce an effective incompressibility in a finite system of nucleons, where is a representative length scale of the size of the system. The Fermi momentum scales as the inverse of , i.e.,
such that Eq. (47) can be modified in a finite system as
If the mean square radius is chosen as the typical length scale, then
It can be shown [6] that Eq. (51) eventually leads to the expression for the incompressibility of a finite -body nucleus
where is the mass of the nucleon and is the GMR energy, defined in Eq. (46). The finite nucleus incompressibility and the nuclear matter incompressibility can be linked through a so-called leptodermous expansion, similar to the liquid-drop formula for nuclear masses,
where , , , are the volume, surface, Coulomb, and symmetry contributions to the incompressibility of a finite -body system, while and are the neutron and proton numbers, respectively [5]. For symmetric nuclei (), as the ones considered in this work, the finite-nucleus can then be expressed as
where the Coulomb contribution has been neglected. Therefore, one can compute for a variety of nuclei using the above mentioned many-body methods (RPA, CC, IMSRG), and then fit the coefficients in Eq. (53), where corresponds to when extrapolating to infinite [71]. This technique was extensively used to provide estimates of both from mean-field calculations [5] and experimental GMR data [72]. Previous works in the ab initio community followed this approach using the SA-NCSM method [73], obtaining MeV with the NNLO interaction, and the PGCM employing the N3LO interaction from Ref. [74], which gave MeV. According to Ref. [3], this strategy can provide a useful consistency test for finite and infinite matter calculation within a given model, but large uncertainties might affect the reliability of the extrapolated values.
In Figure 4, results for the RPA, IMSRG, and CC finite-nucleus incompressibility are displayed. Theoretical uncertainties account for the residual dependence on the model-space parameters and , and they are calculated as outlined for the values in Tab. I. We point
Figure 4. Finite-nucleus incompressibility from Eq. (52). Calculations were performed employing the NNLO [60] and NNLO (394) [61] interactions. Numerical values are given by the average between calculations employing different at for RPA and CC and for IMSRG calculations. The error bars reflect the model-space convergence of the results and are determined from the variation and the two largest employed .
out the very good agreement between IMSRG and CC results for both interactions. In analogy to the average energies, NNLO yields lower values with respect to NNLO (394). In some instances, as in the case of , the results of the two chiral interactions overlap. As noticed for moments and average energies, RPA is close to the results of correlated many-body methods in the soft interaction case, while significant deviations are seen for the harder NNLO.
The points from Figure 4 are then used to extract the parameters from Eq. (54) via a linear fitting procedure. The weight of the points are chosen as , where is the absolute uncertainty of , stemming from its residual and dependence. The linear fit is displayed in Figure 5 for the three different many-body methods and for the two interactions. The statistical uncertainty of the fit is also displayed in the form of shaded areas, indicating the 68% and 95% of confidence level. Results from infinite nuclear matter calculations are also displayed as horizontal lines. As already observed, the extrapolations from CC and IMSRG calculations are in good agreement, while the consistency of RPA results with the other two methods depends on the softness of the interaction, with a difference of 50--60 MeV for NNLO and 10--30 MeV for NNLO (394). The extrapolated values of are listed in Table II with the associated uncertainties.
Figure 5. Linear fit from Eq. (54) for the RPA, IMSRG, and CC points from Figure 4. The shaded areas represent the 68% and 95% confidence level areas, while solid horizontal lines are numerical values for from nuclear matter calculations [60, 61, 75].
| [MeV] | RPA | IMSRG | CC |
| NNLOsat | |||
| NNLOGO (394) |
Table II. RPA, IMSRG, and CC results for the extrapolated value of from Figure 5 for the NNLOsat and NNLOGO (394) interactions.
While extrapolated IMSRG and CC results are consistent between each other, significant differences are observed with respect to infinite nuclear matter calculations based on the same interactions, see Figure 5. A sounder extrapolation would demand a larger set of nuclei, which would require the ability to access open-shell nuclei with both CC and IMSRG methods. Moreover, the Coulomb component entering Eq. (53) was neglected. While it is believed to have small effects in the determination of [76], its contribution should be more deeply investigated in future developments. A few comments are in order also on the side of the infinite nuclear matter results. First, nuclear matter computations do not include the Coulomb interaction, which is instead included for finite nuclei. Second, a better assessment of uncertainties, particularly those stemming from the many-body truncation, would be important to draw more definitive conclusions. Finally, it is worth recalling that in nuclear matter calculations is obtained from the second derivative of the energy per particle with respect to the density at the saturation minimum. This extraction requires a dense sampling of the energy-density curve around the minimum to accurately approximate the second derivative. Moreover, if the interaction under consideration predicts a saturation density higher than the empirical value (e.g., for NNLOsat the saturation density amounts to around ), this will affect the resulting .
On the one hand, our results lie below the range of Ref. [72], based on a global fit of available experimental data, which, as pointed out in Sec. IV C, can be limited in the excitation energy range they cover. On the other hand, the incompressibility values presented in this work are consistent with phenomenological ranges within their uncertainties, see, e.g., [6].
Conclusions and Outlook
In this work we performed a detailed comparison of the LIT-CC and IMSRG approaches applied to the calculation of the nuclear monopole response. The two frameworks yield good agreement for symmetric closed-shell nuclei using different chiral interactions, thus highlighting the consistency of the recently formulated moment-operator method [34] compared to the well-established integral transform approach. The extracted moments of the strength function allowed to calculate the finite-nucleus incompressibility, which was linked to the nuclear matter value through a leptodermous expansion. The extrapolations display sizeable differences with explicit nuclear matter calculations with the same interactions, but the values are consistent with phenomenological ranges.
For the future, we emphasize the need to account for Coulomb effects in the leptodermous expansion and to investigate asymmetric () nuclei. This will allow for the inclusion of more points in the extrapolation, thus increasing the fit’s stability. Moreover, the inclusion of medium-mass open-shell nuclei will be important to understand the robustness of the many-body frameworks when targeting the nuclear response in presence of strong collective correlations.
Data availability
The data that support the findings of this article are openly available [77].
Acknowledgements
F.B. and S.B. thank Gaute Hagen for providing access to the nuclear coupled-cluster code developed at ORNL (NUCCOR). F.B. would also like to thank Matthias Heinz for useful discussions and for providing IMSRG(3) results for moments for comparison [67]. IMSRG results have been obtained using the IMSRG++ code [78]. The work of F.B. is supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, under the FRIB Theory Alliance award DE-SC0013617; by the U.S. Department of Energy, Office of Science, Office of Advanced Scientific Computing Research and Office of Nuclear Physics, Scientific Discovery through Advanced Computing (SciDAC) program (SciDAC-5 NUCLEI). The work of A.P. and A.S. is supported by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – Project-ID 279384907 – SFB 1245. The work of S.B. is supported by the DFG through Project-ID 279384907 – SFB 1245, and through the Cluster of Excellence “Precision Physics, Fundamental Interactions, and Structure of Matter” (PRISMA+ EXC 2118/1, Project ID 39083149). A.T. is supported by the European Research Council (ERC) under the European Union’s Horizon Europe research and innovation programme (Grant Agreement No. 101162059). The authors gratefully acknowledge the Gauss Centre for Supercomputing e.V. (www.gauss-centre.eu) for funding this project by providing computing time on the GCS Supercomputer JUWELS at Jülich Supercomputing Centre (JSC). This research used resources of the Oak Ridge Leadership Computing Facility located at Oak Ridge National Laboratory, which is supported by the Office of Science of the Department of Energy under contract No. DE-AC05-00OR22725. Computer time was provided by the Innovative and Novel Computational Impact on Theory and Experiment (INCITE) program and by the supercomputer Mogon at Johannes Gutenberg Universität Mainz.
Convergence of
The numerical convergence of the and moments was discussed in Sec. IV B. In this Appendix, the moments for the IS0 operator from Eq. (45) are displayed in Figure 6. The convergence pattern is similar to the results from Sec. IV B. The model-space convergence is considerably faster for the NNLO (394) interaction than for NNLO in all considered cases. When considering the most converged results, CC and IMSRG calculations are generally in good agreement. Results from RPA calculations are also not far from correlated methods, indicating that the higher-energy part of the response (since is an energy weighted sum), i.e., the giant monopole resonance, is less affected by the inclusion of dynamical correlations within the ground state, for both soft and hard interactions.
Figure 6. Values of for the isoscalar monopole (IS0) response for RPA (left), IMSRG (middle), and CC (right) calculations. Results are given for two different interactions (NNLO [60], NNLO [61]) for MeV as a function of the model space size . Absolute values are rescaled by a factor in order to show all nuclei on the same scale.
References
- [1]K. Goeke and J. Speth, Theory of Giant Resonances, Ann. Rev. Nucl. Part. Sci. 32, 65 (1982).
- [2]M. N. Harakeh and A. Woude, Giant Resonances: fundamental high-frequency modes of nuclear excitation, Vol. 24 (Oxford Studies in Nuclear Phys, 2001).
- [3]U. Garg and G. Colò, The compression-mode giant resonances and nuclear incompressibility, Prog. Part. Nucl. Phys. 101, 55 (2018).DOI
- [4]G. Colò, Theoretical Methods for Giant Resonances, in Handbook of Nuclear Physics, edited by I. Tanihata, H. Toki, and T. Kajino (2022) pp. 1–29.
- [5]J. Blaizot, Nuclear compressibilities, Phys. Rept. 64, 171 (1980).DOI
- [6]X. Roca-Maza and N. Paar, Nuclear equation of state from ground and collective excited state properties of nuclei, Prog. Part. Nucl. Phys. 101, 96 (2018).
- [7]J. M. Lattimer and M. Prakash, Nuclear matter and its role in supernovae, neutron stars and compact object binary mergers, Phys. Rept. 333, 121 (2000).
- [8]H.-T. Janka, K. Langanke, A. Marek, G. Martinez-Pinedo, and B. Mueller, Theory of Core-Collapse Supernovae, Phys. Rept. 442, 38 (2007).DOI
- [9]H. Yasin, S. Schäfer, A. Arcones, and A. Schwenk, Equation of state effects in core-collapse supernovae, Phys. Rev. Lett. 124, 092701 (2020).DOI
- [10]J. M. Lattimer, Neutron Stars and the Nuclear Matter Equation of State, Ann. Rev. Nucl. Part. Sci. 71, 433 (2021).DOI
- [11]H.-T. Janka and A. Bauswein, Dynamics and Equation of State Dependencies of Relevance for Nucleosynthesis in Supernovae and Neutron Star Mergers, in Handbook of Nuclear Physics, edited by I. Tanihata, H. Toki, and T. Kajino (2023) pp. 1–98.
- [12]M. Jacobi, F. M. Guercilena, S. Huth, G. Ricigliano, A. Arcones, and A. Schwenk, Effects of nuclear matter properties on neutron star mergers, Mon. Not. Roy. Astron. Soc. 527, 8812 (2023).DOI
- [13]G. Ricigliano, M. Jacobi, and A. Arcones, Impact of nuclear matter properties on the nucleosynthesis and the kilonova from binary neutron star merger ejecta, Mon. Phys. 92, 025004 (2020). Not. Roy. Astron. Soc. 533, 2096 (2024).
- [14]P. Ring and P. Schuck, The Nuclear Many-Body Problem, 1st ed., Theoretical and Mathematical Physics (Springer, New York, 1980).DOI
- [15]P. F. Bortignon, A. Bracco, and R. A. Broglia, Giant Resonances: Nuclear structure at finite temperature (CRC Press, 1998).
- [16]M. Bender, P.-H. Heenen, and P.-G. Reinhard, Self-consistent mean-field models for nuclear structure, Rev. Mod. Phys. 75, 121 (2003).DOI
- [17]T. Niksic, D. Vretenar, and P. Ring, Relativistic Nuclear Energy Density Functionals: Mean-Field and Beyond, Prog. Part. Nucl. Phys. 66, 519 (2011).DOI
- [18]T. Nakatsukasa, K. Matsuyanagi, M. Matsuo, and K. Yabana, Time-dependent density-functional description of nuclear dynamics, Rev. Mod. Phys. 88, 045004 (2016).DOI
- [19]N. Schunck, ed., Energy Density Functional Methods for Atomic Nuclei, 2053-2563 (IOP Publishing, 2019).
- [20]E. Epelbaum, H.-W. Hammer, and U.-G. Meißner, Modern theory of nuclear forces, Rev. Mod. Phys. 81, 1773 (2009).DOI
- [21]R. Machleidt and D. Entem, Chiral effective field theory and nuclear forces, Phys. Rept. 503, 1 (2011).DOI
- [22]H.-W. Hammer, S. König, and U. van Kolck, Nuclear effective field theory: Status and perspectives, Rev. Mod.DOI
- [23]H. Krebs, Nuclear Currents in Chiral Effective Field Theory, Eur. Phys. J. A 56, 234 (2020).DOI
- [24]S. Bacca, N. Barnea, G. Hagen, G. Orlandini, and T. Papenbrock, First Principles Description of the Giant Dipole Resonance in 16O, Phys. Rev. Lett. 111, 122502 (2013).DOI
- [25]S. Bacca, N. Barnea, G. Hagen, M. Miorelli, G. Orlandini, and T. Papenbrock, Giant and pigmy dipole resonances in 4He, 16,22O, and 40Ca from chiral nucleon-nucleon interactions, Phys. Rev. C 90, 064619 (2014).DOI
- [26]M. Miorelli, S. Bacca, N. Barnea, G. Hagen, G. R. Jansen, G. Orlandini, and T. Papenbrock, Electric dipole polarizability from first principles calculations, Phys. Rev. C 94, 034317 (2016).DOI
- [27]B. Acharya, J. E. Sobczyk, S. Bacca, G. Hagen, and W. Jiang, 16O Electroweak Response Functions from First Principles, Phys. Rev. Lett. 134, 202501 (2025).
- [28]F. Bonaiti, S. Bacca, G. Hagen, and G. R. Jansen, Electromagnetic observables of open-shell nuclei from coupled-cluster theory, Phys. Rev. C 110, 044306 (2024).DOI
- [29]F. Marino, F. Bonaiti, S. Bacca, G. Hagen, and G. R. Jansen, Structure and dynamics of open-shell nuclei from spherical coupled-cluster theory, Phys. Rev. C 112, 014315 (2025). [30] F. Raimondi and C. Barbieri, Nuclear electromagnetic dipole response with the Self-Consistent Green’s Function formalism, Phys. Rev. C 99, 054327 (2019).
- [31]F. Raimondi and C. Barbieri, Core-polarization effects and effective charges in O and Ni isotopes from chiral interactions, Phys. Rev. C 100, 024317 (2019).
- [32]N. M. Parzuchowski, T. D. Morris, and S. K. Bogner, Ab Initio Excited States from the In-Medium Similarity Renormalization Group, Phys. Rev. C 95, 044304 (2017).DOI
- [33]N. M. Parzuchowski, S. R. Stroberg, P. Navrátil, H. Hergert, and S. K. Bogner, Ab initio electromagnetic observables with the in-medium similarity renormalization group, Phys. Rev. C 96, 034324 (2017).DOI
- [34]A. Porro, A. Schwenk, and A. Tichai, Impact of ground-state correlations on the multipole response of nuclei: Ab initio calculations of moment operators, Phys. Rev. C 112, 054303 (2025).
- [35]F. Bonaiti, C. Balos, K. Godbey, G. Hagen, T. Papenbrock, and C. S. Woodward, Computing nuclear response functions with time-dependent coupled-cluster theory, Phys. Rev. C 113, 024312 (2026).DOI
- [36]P. Papakonstantinou, R. Trippel, and R. Roth, From Chiral NN(N) Interactions to Giant and Pygmy Resonances via Extended RPA, Acta Phys. Polon. B 48, 537 (2017).DOI
- [37]Q. Wu, B. S. Hu, F. R. Xu, Y. Z. Ma, S. J. Dai, Z. H. Sun, and G. R. Jansen, Chiral NNLOsat descriptions of nuclear multipole resonances within the random phase approximation, Phys. Rev. C 97, 054306 (2018).
- [38]B. S. Hu, Q. Wu, Q. Yuan, Y. Z. Ma, X. Q. Yan, and F. R. Xu, Nuclear multipole responses from chiral effective field theory interactions, Phys. Rev. C 101, 044309 (2020).DOI
- [39]Y. Beaujeault-Taudière, M. Frosini, J. P. Ebran, T. Duguet, R. Roth, and V. Somà, Zero- and finite-temperature electromagnetic strength distributions in closed- and open-shell nuclei from first principles, Phys. Rev. C 107, L021302 (2023).
- [40]L. G.-M. Zaragoza, J.-P. Ebran, S. Hilaire, S. Pérú, M. Frosini, and T. Duguet, Towards systematic large scale Quasiparticle Random-Phase Approximation calculations with covariant and chiral interactions, EPJ Web Conf. 294, 03003 (2024).
- [41]J. Carter, L. Donaldson, H. Fujita, Y. Fujita, M. Jingo, C. Kureba, M. Latif, E. Litvinova, F. Nemulodi, P. von Neumann-Cosel, R. Neveling, P. Papakonstantinou, P. Papka, L. Pellegrini, V. Y. Ponomarev, A. Richter, R. Roth, E. Sideras-Haddad, F. D. Smit, J. A. Swartz, A. Tamii, R. Trippel, I. T. Usman, and H. Wibowo, Damping of the isovector giant dipole resonance in 40,48Ca, Phys. Lett. B 833, 138734 (2022).DOI
- [42]M. Frosini, T. Duguet, J.-P. Ebran, and V. Somà, Multireference many-body perturbation theory for nuclei: I. Novel PGCM-PT formalism, Eur. Phys. J. A 58, 62 (2022).
- [43]M. Frosini, T. Duguet, J.-P. Ebran, B. Bally, T. Mongelli, T. R. Rodríguez, R. Roth, and V. Somà, Multireference many-body perturbation theory for nuclei: II. Ab initio study of neon isotopes via PGCM and IM-NCSM calculations, Eur. Phys. J. A 58, 63 (2022).
- [44]M. Frosini, T. Duguet, J.-P. Ebran, B. Bally, H. Hergert, T. R. Rodríguez, R. Roth, J. Yao, and V. Somà, Multireference many-body perturbation theory for nuclei: III. Ab initio calculations at second order in PGCM-PT, Eur. Phys. J. A 58, 64 (2022).
- [45]A. Porro, T. Duguet, J.-P. Ebran, M. Frosini, R. Roth, and V. Somà, Ab initio description of monopole resonances in light- and medium-mass nuclei: I. Technical aspects and uncertainties of ab initio PGCM calculations, Eur. Phys. J. A 60, 133 (2024).
- [46]A. Porro, T. Duguet, J.-P. Ebran, M. Frosini, R. Roth, and V. Somà, Ab initio description of monopole resonances in light- and medium-mass nuclei: II. Ab initio PGCM calculations in 46Ti, 28Si and 24Mg, Eur. Phys. J. A 60, 134 (2024).
- [47]A. Porro, T. Duguet, J.-P. Ebran, M. Frosini, R. Roth, and V. Somà, Ab initio description of monopole resonances in light- and medium-mass nuclei: III. Moments evaluation in ab initio PGCM calculations, Eur. Phys. J. A 60, 155 (2024).
- [48]A. Porro, T. Duguet, J.-P. Ebran, M. Frosini, R. Roth, and V. Somà, Ab initio description of monopole resonances in light- and medium-mass nuclei: IV. Angular momentum projection and rotation-vibration coupling, Eur. Phys. J. A 60, 233 (2024).
- [49]G. Hagen, T. Papenbrock, M. Horoi, M. Hjorth-Jensen, and D. J. Dean, Coupled-cluster computations of atomic nuclei, Rep. Prog. Phys. 77, 096302 (2014).DOI
- [50]T. Miyagi, S. R. Stroberg, J. D. Holt, and N. Shimizu, Ab initio multishell valence-space Hamiltonians and the island of inversion, Phys. Rev. C 102, 034320 (2020).DOI
- [51]M. Heinz, T. Miyagi, S. R. Stroberg, A. Tichai, K. Hebeler, and A. Schwenk, Improved structure of calcium isotopes from ab initio calculations, Phys. Rev. C 111, 034311 (2025).
- [52]O. Bohigas, A. M. Lane, and J. Martorell, Sum Rules for Nuclear Collective Excitations, Phys. Rept. 51, 267 (1979).DOI
- [53]L. Capelli, G. Colo, and J. Li, Dielectric theorem within the Hartree-Fock-Bogoliubov framework, Phys. Rev. C 79, 054329 (2009).DOI
- [54]V. D. Efros, W. Leidemann, G. Orlandini, and N. Barnea, The Lorentz integral transform (LIT) method and its applications to perturbation-induced reactions, J. Phys. G 34, R459 (2007).DOI
- [55]K. Tsukiyama, S. K. Bogner, and A. Schwenk, In-Medium Similarity Renormalization Group for Nuclei, Phys. Rev. Lett. 106, 222502 (2011).pubmed.ncbi.nlm.nih.gov/21702596
- [56]H. Hergert, S. K. Bogner, T. D. Morris, A. Schwenk, and K. Tsukiyama, The In-Medium Similarity Renormalization Group: A Novel Ab Initio Method for Nuclei, Phys. Rept. 621, 165 (2016).DOI
- [57]T. D. Morris, N. Parzuchowski, and S. K. Bogner, Magnus expansion and in-medium similarity renormalization group, Phys. Rev. C 92, 034331 (2015).DOI
- [58]I. Shavitt and R. J. Bartlett, Many-Body Methods in Chemistry and Physics: MBPT and Coupled-Cluster Theory, Cambridge Molecular Science (Cambridge University Press, 2009).
- [59]J. D. Watts, J. Gauss, and R. J. Bartlett, Coupled-cluster methods with noniterative triple excitations for restricted open-shell hartree–fock and other general single determinant reference functions. energies and analytical gradients, J. Chem. Phys. 98, 8718 (1993).DOI
- [60]A. Ekström, G. R. Jansen, K. A. Wendt, G. Hagen, T. Papenbrock, B. D. Carlsson, C. Forssén, M. Hjorth-Jensen, P. Navrátil, and W. Nazarewicz, Accurate nuclear radii and binding energies from a chiral interaction, Phys. Rev. C 91, 051301 (2015), [Erratum: Phys. Rev. C 109, 059901 (2024).DOI
- [61]W. G. Jiang, A. Ekström, C. Forssén, G. Hagen, G. R. Jansen, and T. Papenbrock, Accurate bulk properties of nuclear from A = 2 to ∞ from potentials with Δ isobars, Phys. Rev. C 102, 054301 (2020).DOI
- [62]G. Hagen, T. Papenbrock, D. J. Dean, A. Schwenk, A. Nogga, M. Wloch, and P. Piecuch, Coupled-cluster theory for three-body Hamiltonians, Phys. Rev. C 76, 034302 (2007).DOI
- [63]R. Roth, S. Binder, K. Vobig, A. Calci, J. Langhammer, and P. Navrátil, Medium-Mass Nuclei with Normal-Ordered Chiral NN+3N Interactions, Phys. Rev. Lett. 109, 052501 (2012).pubmed.ncbi.nlm.nih.gov/23006166
- [64]T. Miyagi, S. R. Stroberg, P. Navrátil, K. Hebeler, and J. D. Holt, Converged ab initio calculations of heavy nuclei, Phys. Rev. C 105, 014302 (2022).DOI
- [65]T. Miyagi, NuHAMLi: A numerical code to generate nuclear two- and three-body matrix elements from chiral effective field theory, Eur. Phys. J. A 59, 150 (2023).
- [66]D. J. Rowe, Nuclear collective motion: models and theory (World Scientific, 2010).
- [67]M. Heinz, private communication.
- [68]Y.-W. Lui, H. L. Clark, and D. H. Youngblood, Giant resonances in 16O, Phys. Rev. C 64, 064308 (2001).DOI
- [69]D. H. Youngblood, Y.-W. Lui, and H. L. Clark, Giant monopole resonance strength in 40Ca, Phys. Rev. C 55, 2811 (1997).DOI
- [70]C. Monnoreau, E. Khan, Y. Blumenfeld, C. E. Demonchy, W. Mittig, P. Roussel-Chomaz, D. Beaumel, M. Caamaño, D. Cortina-Gil, J. P. Ebran, N. Frascaria, U. Garg, M. Gelin, A. Gillibert, D. Gupta, N. Keeley, F. Maréchal, A. Obertelli, and J.-A. Scarpaci, First measurement of the giant monopole and quadrupole resonances in a short-lived nucleus: 56Ni, Phys. Rev. Lett. 100, 042501 (2008).
- [71]B. K. Jennings and A. D. Jackson, Collective states in nuclei: A tale of two sounds, Phys. Rep. 66, 141 (1980).DOI
- [72]J. R. Stone, N. J. Stone, and S. A. Moszkowski, Incompressibility in finite nuclei and nuclear matter, Phys. Rev. C 89, 044316 (2014).DOI
- [73]M. Burrows, R. B. Baker, S. Bacca, K. D. Launey, T. Dytrych, and D. Lang, Response functions and giant monopole resonances for light to medium-mass nuclei from the ab initio symmetry-adapted no-core-shell model, J. Phys. G 52, 035107 (2025).
- [74]T. Hüther, K. Vobig, K. Hebeler, R. Machleidt, and R. Roth, Family of Chiral Two- plus Three-Nucleon Interactions for Accurate Nuclear Structure Studies, Phys. Lett. B 808, 135651 (2020).
- [75]F. Alp, Y. Dietz, K. Hebeler, and A. Schwenk, Equation of state and fermi liquid properties of dense matter based on chiral effective field theory interactions, Phys. Rev. C 112, 055802 (2025).arxiv.org/abs/2504.18259
- [76]H. Sagawa, S. Yoshida, G.-M. Zeng, J.-Z. Gu, and X.-Z. Zhang, Isospin dependence of incompressibility in relativistic and nonrelativistic mean field calculations, Phys. Rev. C 76, 034327 (2007).arxiv.org/abs/0706.0966
- [77]F. Bonaiti, A. Porrio, S. Bacca, A. Schwenk, and A. Tichai, Data: Ab initio calculations of monopole sum rules: From finite nuclei to infinite nuclear matter, 10.5281/zenodo.17533320 (2025).DOI
- [78]S. R. Stroberg et al., https://github.com/ragnarstroberg/imsrg (2025).