betaFeedback

WorksPhysics and Astronomy

Neutronic Field-Effect Transistor

Abstract

Field-effect electronic devices are in widespread use in communication, computing, data storage, and sensing applications. We demonstrate a neutronic field-effect transistor (NFET) that is analogous to the Datta-Das electron spin transistor and atomtronic devices. The NFET is based on a perfect-crystal Mach-Zehnder neutron interferometer with phase shifts applied to the spin and path degrees of freedom.

Introduction

Neutron interferometry is a powerful tool for investigating fundamental quantum physics and precision measurement [1]. It also provides a platform for testing quantum computing concepts in a controlled, low-noise environment [2], as well as performing weak measurements of neutron spin and path degrees of freedom [3, 4, 5].

Here we view neutron interferometry from a spintronic perspective. We demonstrate a neutronic spin transistor that uses the same principle as the electron spin transistor proposed by Datta and Das [6, 7], that was subsequently realized by Koo, et al. [8]. Beyond simple switching applications, our device can also support universal quantum gate sets on the two-qubit neutron spin-path system.

Field–effect devices

Field–effect devices can be schematized by the generic Figure 1, where source designates an input current, gate is an interface subject to a control field, and drain is an output current.

General schematic of a field–effect device

Figure 1. General schematic of a field–effect device. A control field applied to the gate governs the current flow between source and drain.

Spintronics

The most consequential early example is the field-effect transistor (FET), a concept traceable to the 1926 U.S. Patent Application filed by Julius E. Lilienfeld [9]. The FET gate is a junction that controls the flow of electrical current between an input source and an output drain. In 1952, William Shockley proposed a junction field–effect transistor that modulated current flow by electric-field control of a PN junction [10]. The metal-oxide semiconductor field-effect transistor, MOSFET, introduced by Kahng and Atalla in 1960 [11], is now a fundamental building block of modern electronics.

New gate physics can lead to new applications. For example, a major advance in field–effect transduction was heralded by the 2004 publication of Novoselov, et al. [12]. There, the gate was made of a strip of effectively two-dimensional material, graphene, consisting of a few atomic layers of graphite. Graphene is a semimetal and can be rapidly switched between conducting and non-conducting states by a gate voltage swing of 10 – 100 V. The advent of low-dimensional gate materials has led to new field–effect sensors, as reviewed by Dai, Liu, and Wei [13].

The mid-1980’s observation of “giant magnetoresistance” [14, 15] sparked revolutionary improvements in magnetic data storage. Manifested in thin multilayer films of alternating ferromagnetic materials with non-magnetic spacers, it resulted in a 1000-fold increase in magnetic storage capacity. Recognized by the 2007 Nobel Prize in Physics, this development inspired visions of a future “spintronics” in which electron spin might supplement electric charge as a vehicle of logical bit representation in digital circuits. Influential early perspectives on spintronics are presented in [16] and [17]. More recent reviews emphasize data storage and sensing applications [18, 19, 20, 21, 22].

In 1990, Supriyo Datta and Biswajit Das proposed a field-effect electron spin transistor, as a candidate for a spintronic counterpart to the electronic FET [6]. This spintronic concept was realized in a working device 19 years later [8]. Meanwhile, it inspired exploration of potential uses in quantum computing [23]; implementation in atomtronic devices [24, 25, 26, 27, 28, 29, 30, 31]; and the neutron spin transistor reported here.

The Datta-Das transistor and its optoelectronic analog, the Pockels cell

Figure 2. The Datta-Das transistor and its optoelectronic analog, the Pockels cell. Both of these are polarization–rotation devices. a) The source, S, is a magnetized source of electrons that are spin–polarized in the direction of electron current flow; the drain, D, is magnetized so that only electrons with opposite spin are admitted. Between S and D there is a semiconductor medium that supports a voltage–controlled spin–orbit interaction, e.g. of the Rashba type demonstrated by Grundler [32]. When the voltage of the gate, G attains a target value, the spin–orbit coupling interaction rotates the electron spin by 180° during the electron transit through the indicated region. b) Schematic of a Pockels cell, in which the birefringence of transparent crystal can be tuned by the voltage applied to gate G to rotate a horizontally–polarized photon into vertical polarization [33]. Figure adapted from Ref. [7].

Fig. 2 shows that the Datta–Das spin transistor is fundamentally a spin–rotation device. As noted by Datta [7], “a typical FET has an OFF/ON resistance [extinction] ratio of about 10510^{5}. By contrast, the spin transistor can at best reduce the current a little bit, partly because polarizers and analyzers are far from ideal and partly because scattering processes in solids can randomize spins quite strongly . . . Alternative designs have been proposed to overcome this limitation.”

Polarization extinction ratios of 10510^{5} are readily obtainable with photons [34], and indeed MOSFET technology is now being deployed in electronic switches [35]. In contrast to the centuries over which light polarization technology evolved, sources and detectors of spin-polarized electrons date back only to the 1960s [36]. Thus, future developments may bring the Datta–Das transistor closer to practicality.

Meantime, the spin polarization rejection ratios attained for neutron beams routinely exceed 1000, and in dedicated efforts they have attained about 101210^{12} [37]. Here we apply these ideas to realize a neutron spin transistor. This device achieves matter-wave amplitude modulation through quantum phase control mediated by a neutron interferometer.

The perfect-crystal neutron interferometer

Since its realization in 1974 [38], the perfect-crystal neutron interferometer (NI) has found numerous applications in studies of materials and fundamental physics [1, 39, 40]. Recent advances in the decoupling of the NI from the environment [2, 41] have allowed the implementation of demanding and sensitive experiments [42, 43, 44]. Here we demonstrate a unique function of the NI which has diverse integrated applications.

The oscillation of spin polarization at the output of an interferometer due to simultaneously applied phase shifts on the path and spin degrees of freedom was first noted and observed by Badurek et al. in 1976 [45]. They achieved a polarization of 20%. In 2001 the same concept was proposed for electron spin polarizer devices [46]. In the field of spintronics this is a possible solution to the major problem of having a controlled source of spin polarized electrons. Later on this approach was generalized to non dispersive degrees of freedom which would yield higher magnitude correlations [47].

Here we demonstrate a neutron spin transistor with a maximum output polarization of P=77±2%P = 77 \pm2\%, corresponding to a spin extinction ratio (1+P)/(1−P)≈8:1(1+P)/(1-P) \approx8:1, limited by the 83 % contrast of the interferometer.

Design and Theory

Our neutron spin transistor is built upon a perfect–crystal neutron interferometer. Presuming no previous familiarity by the reader with that device, we summarize its basic operations with reference to Figure 3.

Schematic of a standard perfect-crystal neutron interferometer

Figure 3. Schematic of a standard perfect-crystal neutron interferometer, adapted from Ref. [48]. The lower portion is a drawing of the device; the middle portion is a functional schematic, from a viewpoint above the x−yx-y plane defined by the neutron beams; the upper portion is the corresponding quantum gate description of the device. The incident neutron beam is unpolarized. A uniform guide field BzB_z is applied along zz over the full length of the interferometer and the spin analyzer, defining the spin quantization axis. In the circuit, HH is the Hadamard gate representing the beam splitting at the first and third blades, U(ϕ)U(\phi) is the phase flag rotation gate, and the controlled Uθ(β)U_\theta(\beta) is the spin rotation applied only in path I (path state ∣0⟩\lvert0\rangle). The final spin measurement, conditioned on the path, corresponds to analyzing the spin of the O beam.

The lower portion of Figure 3 is a drawing of the interferometer, the middle portion is a diagram of its operation, as seen from above, and the upper portion is the corresponding quantum circuit description of the device.

The interferometer chassis is made from a cylindrical boule of high–purity single–crystal silicon. The upper half of that boule was reduced by subtractive milling to a structure of three blades standing in the atomic registry of the original crystal. As labeled, those blades serve the functions of beam–splitter, mirror, and analyzer of an optical Mach–Zehnder interferometer [49, 50], except that the “mirrors” are Bragg–diffracting crystals that transmit part of their incident neutron beams out of the interferometer.

The left-most blade serves as a beam splitter: a fraction of the incident neutron beam is transmitted through it, another is diffracted at the Bragg angle. The middle blade serves as a mirror: part of the beam incident on it is diffracted at the Bragg angle; the other part (not shown here) is transmitted and lost to the interferometer. The rightmost blade coherently recombines the two paths and separates them into the forward-diffracted (O) beam and the diffracted (H) beam. We post-select on only those neutrons that reach the spin analyzer in the O-beam.

In the application shown here, the quartz phase flag induces a differential quantum phase shift (ϕ\phi) between neutron paths I and II that depends upon the angle δ\delta. This is due to the difference between the neutron indices of refraction of air and quartz.

In addition to the path phase ϕ\phi, a spin rotation Uθ(β)U_\theta(\beta) is applied in path I only. It is a rotation by β\beta about the axis n^=(0,sin⁡θ,cos⁡θ)\hat{n}=(0,\sin\theta,\cos\theta), which lies in the yy-zz plane of the Bloch sphere at an angle θ\theta from zz:

Uθ(β)=e−iβn^⋅σ/2,(1)U_\theta(\beta)=e^{-i\beta\hat{n}\cdot\boldsymbol{\sigma}/2}, \tag*{(1)}

where σ=(σx,σy,σz)\boldsymbol{\sigma}=(\sigma_x,\sigma_y,\sigma_z) are the Pauli matrices. The spin components parallel and antiparallel to n^\hat{n} are eigenstates of Uθ(β)U_\theta(\beta) and acquire opposite phases, ∓β/2\mp\beta/2, in path I. This spin-dependence can be used to convert an unpolarized input into a polarized output, with ϕ\phi, β\beta, and θ\theta acting as the gate parameters.

In our implementation, Uθ(β)U_\theta(\beta) is applied by a 10 μ\mum-thick permalloy film [51]. The two paths are separated by several centimeters, so the film can be placed in path I alone. Permalloy is a soft ferromagnet; the film is magnetized in its plane along zz, so θ=0\theta=0. The neutron spin precession angle β\beta is proportional to the neutron’s path length through the film; rotating the film about zz lengthens this path and so tunes β\beta.

The third blade coherently recombines the two paths, outputting the O beam and the H beam. These two outputs are projections onto the eigenstates of the path qubit, and we post-select on the O beam. For an unpolarized incident beam, its intensity is

IO=12[1+cos⁡β2cos⁡ϕ],(2)I_O=\frac{1}{2}\left[1+\cos\frac{\beta}{2}\cos\phi\right], \tag*{(2)}

and its polarization vector is

P=sin⁡β2sin⁡ϕ1+cos⁡β2cos⁡ϕ[0sin⁡θcos⁡θ],(3)\mathbf{P}=\frac{\sin\frac{\beta}{2}\sin\phi}{1+\cos\frac{\beta}{2}\cos\phi} \begin{bmatrix} 0\\ \sin\theta\\ \cos\theta \end{bmatrix}, \tag*{(3)}

so the spin state of the O beam is

ρO=12(I+P⋅σ).(4)\rho_O=\frac{1}{2}\left(\mathbb{I}+\mathbf{P}\cdot\boldsymbol{\sigma}\right). \tag*{(4)}

In the configuration used here (β=π\beta=\pi, θ=0\theta=0), the O-beam intensity is constant, IO=1/2I_O=1/2, and its spin state is ρO=12(I+sin⁡ϕ σz)\rho_O=\frac{1}{2}(\mathbb{I}+\sin\phi\,\sigma_z): varying ϕ\phi changes the polarization along zz without changing the intensity. We measure Pz=(N+−N−)/(N++N−)P_z=(N_+-N_-)/(N_++N_-) from the counts transmitted by a +z^+\hat{z} spin analyzer with a spin flipper off (N+N_+) and on (N−N_-).

Experimentally, the maximum achievable polarization is limited by the contrast of the interferometer. The contrast is a figure of merit of the entire NI setup quality and it is defined by the intensity at the O or H detector as

C=Imax⁡−Imin⁡Imax⁡+Imin⁡(5)C=\frac{I_{\max}-I_{\min}}{I_{\max}+I_{\min}} \tag*{(5)}

Because the NI blades are not 50 : 50 beam splitters the contrast at the H-detector can not reach 1. While the contrast at the O-detector is in principle 1.

Figure 4 illustrates the transfer characteristics of the neutron spin transistor. The output polarization is jointly controlled by the interferometric phase flag ϕ\phi, the spin rotation magnitude β\beta, and the rotation axis θ\theta. The upper panel (θ=0\theta= 0) shows that the O-beam polarization along the spin quantization axis can be continuously tuned between positive and negative values by varying ϕ\phi and β\beta, corresponding to switching between spin-up and spin-down output states. The lower panel (β=π\beta= \pi) shows the corresponding dependence on ϕ\phi and θ\theta, demonstrating that the output polarization can be continuously tuned through the combined control of the interferometric phase and spin rotation.

Calculated O-beam polarization along the $z$ direction following a spin rotation $U_\theta(\beta)$ and the application of a phase flag $\phi$ in one interferometer path

Figure 4. Calculated O-beam polarization along the zz direction following a spin rotation Uθ(β)U_\theta(\beta) and the application of a phase flag ϕ\phi in one interferometer path, according to Eq. (3). The upper panel shows the polarization as a function of ϕ\phi and β\beta for θ=0\theta= 0. The lower panel shows the polarization as a function of ϕ\phi and θ\theta for β=π\beta= \pi.

The Datta–Das drain current is the fraction of electrons transmitted by the spin-selective drain, 12(1+cos⁡Δ)\frac{1}{2}(1+\cos\Delta), where Δ\Delta is the gate-controlled precession angle. In our device the spin analyzer plays the role of the drain: it transmits a fraction 12(1+Pz)\frac{1}{2}(1+P_z) of the O beam, converting its polarization into intensity. Our device reproduces the Datta–Das transfer characteristic in two ways. At ϕ=π/2\phi= \pi/2 and β=π\beta= \pi, Eq. (3) gives P=(0,sin⁡θ,cos⁡θ)\mathbf{P} = (0,\sin\theta,\cos\theta): the O beam is fully polarized along the rotation axis, Pz=cos⁡θP_z = \cos\theta, and the analyzer transmits 12(1+cos⁡θ)\frac{1}{2}(1+\cos\theta), so θ\theta would play the role of Δ\Delta. At β=π\beta= \pi and θ=0\theta= 0, Pz=sin⁡ϕP_z = \sin\phi, and the analyzer transmits 12[1+sin⁡ϕ]\frac{1}{2}[1+\sin\phi], with the nuclear phase ϕ\phi acting as the gate. In this case the polarization along zz varies continuously between ±1\pm1 and vanishes at ϕ=0\phi= 0.

Notably, our device is designed to accept an unpolarized beam. The polarization at the drain is produced by spin-dependent interference between the two paths, so the interferometer serves as both the spin-polarizing source and the gate.

Implementation and Results

The measurements were performed at the NIOF beamline at the National Center for Neutron Research (NCNR) at the National Institute of Standards and Technology [52, 53]. The NIOF beamline is dedicated to neutron interferometry experiments. The neutrons delivered to the interferometer have a de Broglie wavelength of λdB=0.271 nm\lambda_{\mathrm{dB}} = 0.271\ \mathrm{nm}.

The neutron interferometer was measured to have an O-beam contrast of 83 %, while the incident beam was unpolarized. A 10 μ\mum-thick permalloy film with a saturation field of 0.9 T was placed in one arm of the interferometer. The O-beam contrast was measured as a function of the film rotation to identify the orientation corresponding to a magnetic phase shift of β=π\beta= \pi. At this condition, Eq. (2) predicts zero O-beam contrast. The film was then fixed at this orientation, and the O-beam polarization was measured as a function of the phase-flag rotation.

Figure 5 shows the measured O-beam polarization as a function of the phase-shift ϕ\phi. The maximum measured state in the forward diffracted path at the output of the interferometer by tuning ϕ\phi and β\beta. The uncertainties, which are smaller than the data markers shown, are purely statistical.

Measured O-beam polarization as a function of $\phi$

Figure 5. Measured O-beam polarization PzP_z as a function of ϕ\phi at β=π\beta= \pi, θ=0\theta= 0. This illustrates direct control of the spin state in the forward diffracted path at the output of the interferometer by tuning ϕ\phi and β\beta. The uncertainties, which are smaller than the data markers shown, are purely statistical.

polarization was 77 % ±\pm 2 %, consistent with the 83 % interferometer contrast setting the upper limit on the achievable output polarization. The observed variation of polarization with phase-flag angle demonstrates experimental control of the output spin state through the interferometric phase. For this neutronic field-effect transistor, the incident unpolarized neutron beam serves as the source, the nuclear and magnetic phase shifts act as gate controls, and the O beam, passed through the spin analyzer, serves as the drain. The gates set the spin state of the O beam, and the analyzer converts it into a transmitted intensity, the analog of the drain current. At β=π\beta= \pi, varying the phase ϕ\phi continuously changes the polarization of the O-beam, allowing the output to be tuned between the two spin states.

This mapping also provides a route to single-shot spin readout [54, 55, 56]. In the neutron implementation, each 3He{}^{3}\mathrm{He} absorption event corresponds intrinsically to the detection of an individual neutron, while the low neutron flux ensures that the mean occupancy of the interferometer is much less than one neutron [52]. Thus, while one neutron is being measured, the next neutron has typically not yet reached the interferometer. When the phase and magnetic rotation are chosen such that the O-beam corresponds predominantly to one spin state, the output path of an individual detected neutron therefore provides a single-neutron spin measurement, with a fidelity limited by the measured output polarization.

Conclusion and Discussion

In this work, we have demonstrated a neutron spin transistor in which a magnetic spin rotation and a nuclear phase flag in a neutron interferometer control the polarization of the output beam from an unpolarized input. Paired with analyzers, this polarization modulation shapes intensity profiles, mirroring the gate control of electronic field effect transistors. The ability to access and tune neutron polarization, alongside beam splitting, paves the way for applications in neutron scattering, quantum information, and materials analysis. Neutrons, with their charge-free spin, offer a fresh perspective on spintronic applications.

Acknowledgments

This work was supported by the Canadian Excellence Research Chairs (CERC) program, the Natural Sciences and Engineering Research Council of Canada (NSERC) Discovery program, the NSERC Canada Graduate Scholarships programs (CGS-M and PGS-D), the Canada First Research Excellence Fund (CFREF), and the US Department of Energy, Office of Nuclear Physics, under Interagency Agreement 89243019SSC000025. Unless otherwise noted, work of the National Institute of Standards and Technology was funded solely by the United States Government.

References

  1. [1]H. Rauch and S. A. Werner, Neutron Interferometry: Lessons in Experimental Quantum Mechanics, Wave-particle Duality, and Entanglement, vol. 12. Oxford University Press, 2015.DOI
  2. [2]D. Pushin, M. Huber, M. Arif, and D. Cory, “Experimental realization of decoherence-free subspace in neutron interferometry,” Physical Review Letters, vol. 107, no. 15, p. 150401, 2011.pubmed.ncbi.nlm.nih.gov/22107271
  3. [3]S. Sponar, T. Denkmayr, H. Geppert, H. Lemmel, A. Matzkin, J. Tollaksen, and Y. Hasegawa, “Weak values obtained in matter-wave interferometry,” Physical Review A, vol. 92, no. 6, p. 062121, 2015.DOI
  4. [4]T. Denkmayr, H. Geppert, H. Lemmel, M. Waegell, J. Dressel, Y. Hasegawa, and S. Sponar, “Experimental demonstration of direct path state characterization by strongly measuring weak values in a matter-wave interferometer,” Physical Review Letters, vol. 118, no. 1, p. 010402, 2017.
  5. [5]H. Lemmel, N. Geerits, A. Danner, H. F. Hofmann, and S. Sponar, “Quantifying the presence of a neutron in the paths of an interferometer,” Physical Review Research, vol. 4, no. 2, p. 023075, 2022.DOI
  6. [6]S. Datta and B. Das, “Electronic analog of the electro-optic modulator,” Applied Physics Letters, vol. 56, pp. 665–667, February 1990.DOI
  7. [7]S. Datta, “How we proposed the spin transistor,” Nature Electronics, vol. 1, p. 604, November 2018.DOI
  8. [8]H. C. Koo, J. H. Kwon, J. Eom, J. Chang, S. H. Han, and M. Johnson, “Control of spin precession in a spin-injected field effect transistor,” Science, vol. 325, pp. 1515–1518, Sept. 2009.
  9. [9]J. E. Lilienfeld, “Method and apparatus for controlling electric currents,” U.S. Patent No. 1,745,175, January 1930. Filed October 8, 1926.
  10. [10]W. Shockley, “A unipolar field-effect transistor,” Proceedings of the I. R. E., vol. 40, pp. 1365–1376, 1946.
  11. [11]D. Kahng, “Electric field controlled semiconductor device,” Aug. 27 1963. US Patent 3,102,230.
  12. [12]K. S. Novoselov, A. K. Geim, S. V. Morozov, D. Jiang, Y. Zhang, S. V. Dubonos, I. V. Grigorieva, and A. A. Firsov, “Electric field effect in atomically thin carbon films,” Science, vol. 306, pp. 666–669, October 2004.pubmed.ncbi.nlm.nih.gov/15499015
  13. [13]C. Dai, Y. Liu, and D. Wei, “Two-dimensional field-effect transistor sensors: The road toward commercialization,” Chemical Reviews, vol. 122, no. 11, pp. 10319–10392, 2022. PMID: 35412802.DOI
  14. [14]M. N. Baibich, J. M. Broto, A. Fert, F. Nguyen Van Dau, F. Petroff, P. Etienne, G. Creuzet, A. Friederich, and J. Chazelas, “Giant magnetoresistance of (001)Fe/(001)Cr magnetic superlattices,” Physical Review Letters, vol. 61, pp. 2472–2475, November 1988.pubmed.ncbi.nlm.nih.gov/10039127
  15. [15]G. Binasch, P. Grünberg, F. Saurenbach, and W. Zinn, “Enhanced magnetoresistance in layered magnetic structures with antiferromagnetic interlayer exchange,” Physical Review B, vol. 39, pp. 4828–4830, March 1989.pubmed.ncbi.nlm.nih.gov/9948867
  16. [16]S. A. Wolf, D. D. Awschalom, R. A. Buhrman, J. M. Daughton, S. von Molnár, M. L. Roukes, A. Y. Chtchelkanova, and D. M. Treger, “Spintronics: A spin-based electronics vision for the future,” Science, vol. 294, pp. 1488–1495, November 2001.
  17. [17]I. Žutić, J. Fabian, and S. Das Sarma, “Spintronics: Fundamentals and applications,” Reviews of Modern Physics, vol. 76, pp. 323–410, April 2004.DOI
  18. [18]J. A. C. Incorvia, T. P. Xiao, N. Zgobi, A. Naeemi, C. Adelmann, F. Catthoor, M. Tahoori, F. Casanova, M. Becherer, G. Prenat, and S. Couet, “Spintronics for achieving system-level energy-efficient logic,” Nature Reviews Electrical Engineering, vol. 1, pp. 700–713, 11 2024.DOI
  19. [19]D. Jo, D. Go, G.-M. Choi, and H.-W. Lee, “Spintronics meets orbitronics: Emergence of orbital angular momentum in solids,” npj Spintronics, vol. 2, no. 1, p. 19, 2024.DOI
  20. [20]B. H. Rimmler, B. Pal, and S. S. Parkin, “Non-collinear antiferromagnetic spintronics,” Nature Reviews Materials, vol. 10, no. 2, pp. 109–127, 2025.DOI
  21. [21]“Spintronics for ultra-low-power circuits and systems,” Nature Reviews Electrical Engineering, vol. 1, p. 691, 2024.DOI
  22. [22]P. W. A. Dal Din, O. J. Amin and K. W. Edmonds, “Antiferromagnetic spintronics and beyond,” npj Spintronics, vol. 2, no. 25, 2024.DOI
  23. [23]D. D. Awschalom, D. Loss, and N. Samarth, “Semiconductor spintronics and quantum computation,” in Semiconductor Spintronics and Quantum Computation (D. D. Awschalom, D. Loss, and N. Samarth, eds.), pp. 1–36, Springer, 2002.DOI
  24. [24]J. Y. Vaishnav, J. Ruseckas, C. W. Clark, and G. Juzeliūnas, “Spin field effect transistors with ultracold atoms,” Physical Review Letters, vol. 101, p. 265302, December 2008.
  25. [25]C. S. Madasu, M. Hasan, C. C. Kwong, and D. Wilkowski, “Data-t das transistor for atomtronic circuits using artificial gauge fields,” Physical Review Research, vol. 4, p. 033180, September 2022.DOI
  26. [26]L. Amico, D. Anderson, M. Boshier, J.-P. Brantut, L.-C. Kwek, A. Minguzzi, and W. von Klitzing, “Colloquium: Atomtronic circuits: From many-body physics to quantum technologies,” Rev. Mod. Phys., vol. 94, p. 041001, Nov 2022.DOI
  27. [27]L. Amico, M. Boshier, G. Birkl, A. Minguzzi, C. Miniatura, L.-C. Kwek, D. Aghamalyan, V. Ahufinger, D. Anderson, N. Andrei, et al., “Roadmap on atomtronics: State of the art and perspective,” AVS Quantum Science, vol. 3, no. 3, 2021.
  28. [28]D. Burba, M. Mackoit-Sinkevičienė, V. Novičenko, E. Witkowska, and G. Juzeliūnas, “Magnetically generated spin-orbit coupling for ultracold atoms with slowly varying periodic driving,” Phys. Rev. A, vol. 109, p. 053319, May 2024.DOI
  29. [29]C. S. Madasu, K. D. Rathod, C. C. Kwong, and D. Wilkowski, “Geometric ramsey interferometry with a tripod scheme,” Phys. Rev. Appl., vol. 21, p. L051001, May 2024.DOI
  30. [30]N. Pradhan, R. Kanamoto, M. Bhattacharya, and P. K. Mishra, “Proposals for realizing a josephson diode in atomtronic circuits,” Phys. Rev. A, vol. 113, p. L061502, Jun 2026.arxiv.org/abs/2511.18091
  31. [31]J. H. Hue, M.-I. Trappe, P. T. Grochowski, J. Lau, and L.-C. Kwek, “A passive atomtronics filter for fermi gases,” AVS Quantum Science, vol. 8, p. 036801, 07 2026.arxiv.org/abs/2511.06612
  32. [32]D. Grundler, “Large rashba splitting in inas quantum wells due to electron wave function penetration into the barrier layers,” Physical Review Letters, vol. 84, pp. 6074–6077, jun 2000.pubmed.ncbi.nlm.nih.gov/10991127
  33. [33]R. W. Waynant and M. N. Ediger, eds., Electro-Optics Handbook. New York: McGraw-Hill, 2nd ed., 2000. McGraw-Hill Optical and Electro-Optical Engineering Series.
  34. [34]P. Steindl, J. Frey, J. Norman, J. Bowers, D. Bouwmeester, and W. Löffler, “Cross-polarization-extinction enhancement and spin-orbit coupling of light for quantum-dot cavity quantum electrodynamics spectroscopy,” Phys. Rev. Appl., vol. 19, p. 064082, Jun 2023.DOI
  35. [35]C.-C. Tu, C.-L. Hung, K.-B. Hong, S. Elangovan, W.-C. Yu, Y.-S. Hsiao, W.-C. Lin, R. Kumar, Z.-H. Huang, Y.-H. Hong, Y.-K. Hsiao, R.-H. Horng, B.-Y. Tsui, T.-L. Wu, J.-H. He, , and H.-C. Kuo, “Industry perspective on power electronics for electric vehicles,” Nat. Rev. Electr. Eng., vol. 1, p. 435, 2024.DOI
  36. [36]C. K. Sinclair, “The development of polarized electron sources - physics and history,” AIP Conference Proceedings, vol. 980, pp. 25–36, 02 2008.DOI
  37. [37]W. Treimer and H. Höppner, “Realizing a (nearly) 100% neutron beam polarization,” Measurement Science and Technology, vol. 31, p. 115017, aug 2020.DOI
  38. [38]H. Rauch, W. Treimer, and U. Bonse, “Test of a single crystal neutron interferometer,” Physics Letters A, vol. 47, no. 5, pp. 369–371, 1974.DOI
  39. [39]H. Rauch, A. Zeilinger, G. Badurek, A. Wilfing, W. Bauspiess, and U. Bonse, “Verification of coherent spinor rotation of fermions,” Physics Letters A, vol. 54, no. 6, pp. 425–427, 1975.DOI
  40. [40]R. Colella, A. W. Overhauser, and S. A. Werner, “Observation of gravitationally induced quantum interference,” Physical Review Letters, vol. 34, no. 23, p. 1472, 1975.DOI
  41. [41]P. Saggu, T. Mineeva, M. Arif, D. G. Cory, R. Haun, B. Heacock, M. G. Huber, K. Li, J. Nsofini, D. Sarenac, et al., “Decoupling of a neutron interferometer from temperature gradients,” Review of Scientific Instruments, vol. 87, no. 12, 2016.DOI
  42. [42]C. W. Clark, R. Barankov, M. G. Huber, D. G. Cory, and D. A. Pushin, “Controlling neutron orbital angular momentum,” Nature, vol. 525, pp. 504–506, Sep 2015.DOI
  43. [43]K. Li, M. Arif, D. G. Cory, R. Haun, B. Heacock, M. G. Huber, J. Nsofini, D. A. Pushin, P. Saggu, D. Sarenac, C. B. Shahi, V. Skavysh, W. M. Snow, and A. R. Young, “Neutron limit on the strongly-coupled chameleon field,” Phys. Rev. D, vol. 93, p. 062001, Mar 2016.DOI
  44. [44]D. Sarenac, M. G. Huber, B. Heacock, M. Arif, C. W. Clark, D. G. Cory, C. B. Shahi, and D. A. Pushin, “Holography with a neutron interferometer,” Optics express, vol. 24, no. 20, pp. 22528–22535, 2016.
  45. [45]G. Badurek, H. Rauch, A. Zeilinger, W. Bauspiess, and U. Bonse, “Phase-shift and spin-rotation phenomena in neutron interferometry,” Physical Review D, vol. 14, no. 5, p. 1177, 1976.DOI
  46. [46]A. A. Kiselev and K. W. Kim, “T-shaped ballistic spin filter,” Applied Physics Letters, vol. 78, no. 6, pp. 775–777, 2001.DOI
  47. [47]R. Ionicioiu and I. D’Amico, “Mesoscopic stern-gerlach device to polarize spin currents,” Physical Review B, vol. 67, no. 4, p. 041307, 2003.DOI
  48. [48]K. Schoen, D. L. Jacobson, M. Arif, P. Huffman, T. Black, W. Snow, S. K. Lamoreaux, H. Kaiser, and S. Werner, “Precision neutron interferometric measure- ments and updated evaluations of the n- p and n- d coherent neutron scattering lengths,” Physical Review C, vol. 67, no. 4, p. 044005, 2003.
  49. [49]L. Mach, “Ueber einen interferenzrefraktor,” Zeitschrift für Instrumentenkunde, vol. 12, p. 89, 1892.
  50. [50]L. Zehnder, “Ein neuer interferenzrefraktor,” Zeitschrift für Instrumentenkunde, vol. 11, p. 275, 1891.DOI
  51. [51]C. J. Wood, M. O. Abutalib, M. G. Huber, M. Arif, D. G. Cory, and D. A. Pushin, “Quantum correlations in a noisy neutron interferometer,” Physical Review A, vol. 90, no. 3, p. 032315, 2014.DOI
  52. [52]D. A. Pushin, M. G. Huber, M. Arif, C. B. Shahi, J. Nsofini, C. J. Wood, D. Sarenac, and D. G. Cory, “Neutron interferometry at the national institute of standards and technology,” Advances in High Energy Physics, vol. 2015, no. 1, p. 687480, 2015.DOI
  53. [53]C. B. Shahi, M. Arif, D. Cory, T. Mineeva, J. Nsofini, D. Sarenac, C. Williams, M. G. Huber, and D. Pushin, “A new polarized neutron interferometry facility at the ncnr,” Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 813, pp. 111–122, 2016.DOI
  54. [54]J. Elzerman, R. Hanson, L. Willems van Beveren, B. Witkamp, L. Vandersypen, and L. P. Kouwenhoven, “Single-shot read-out of an individual electron spin in a quantum dot,” nature, vol. 430, no. 6998, pp. 431–435, 2004.
  55. [55]A. Morello, J. J. Pla, F. A. Zwanenburg, K. W. Chan, K. Y. Tan, H. Huebl, M. Möttönen, C. D. Nugroho, C. Yang, J. A. Van Donkelaar, et al., “Single-shot read-out of an electron spin in silicon,” Nature, vol. 467, no. 7316, pp. 687–691, 2010.DOI
  56. [56]D. D. Awschalom, C. L. Bassett, A. S. Dzurak, E. L. Hu, and J. R. Petta, “Quantum spintronics: engineering and manipulating atom-like spins in semiconductors,” Science, vol. 339, no. 6124, pp. 1174–1179, 2013.DOI

Paper details

vlnc:W_3sjwjqkq
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents