betaFeedback

WorksPhysics and Astronomy

Radiative Heat Transfer and 2D Transition Metal Dichalcogenide Materials

Abstract

Radiative heat transfer is of great interest from a fundamental point of view and for energy harvesting applications. This is a material dependent phenomenon where confined plasmonic excitations, hyperbolicity and other properties can be effective channels for enhancement, especially at the near field regime. Materials with reduced dimensions may offer further benefits of enhancement compared to the bulk systems. Here we study the radiative thermal power in the family of transition metal dichalcogenide monolayers in their H- and T-symmetries. For this purpose, the computed from first principles electronic and optical properties are then used in effective models to understand the emerging scaling laws for metals and semiconductors as well as specific materials signatures as control knobs for radiative heat transfer. Our combined approach of analytical modeling with properties from ab initio simulations can be used for other materials families to build a materials database for radiative heat transfer.

Schematic illustration of radiative heat transfer between two objects separated by a gap

Figure 5.

Introduction

The omnipresent effect of radiative heat transfer between objects held at different temperatures due the exchange of fluctuating electromagnetic fields[1, 2], plays a crucial role in energy harvesting applications[3, 4]. In the near field regime when the objects are separated by a distance smaller than the Wien’s wavelength d<λwiend < \lambda_{\mathrm{wien}}[5], the spatially and temporally coherent electromagnetic waves interact with each other in surface plasmon modes[6, 7, 8], giving rise to tunneled evanescent waves across the separating gap, which ultimately results in much enhanced transferred thermal power[9, 10]. Such findings inspire promising applications in nano-and microscales for radiative heat control in near-field transistor[11], near-field grating[12], near-field solid-state cooling[13], near field thermophotovoltaic[14],and thermal scanning probe lithography[15].

Radiative power enhancement relies on optimization of the structure and material combination. Modal analysis using simplified models for the dielectric response of heat emitters taking into account their structural canonical geometries[16], hyperbolicity in uniaxial anisotropicity[17], and interpolating grating[18], gives insights into enhancing the thermal power. More realistic models utilizing the full dielectric response of the involved materials, however, can help capture various effects beyond the typical Drude or Drude-Lorentz approximations, including the underlying lattice configurations[19], electronic energy dispersion (doping)[20, 21], causality and plasmonic behaviors[22] as well as scattering rates[23].

Research efforts have shown several materials with much enhanced heat transfer power. For instance, typical semiconductor-metal dual plates (SiO2_2-Au, Si-Au) generate HTP that is hundredfold greater than the far-field regime[24]. III-V semiconductor with tuned carrier concentrations (n,p-doped GaAs, n-doped InP, or n,p-doped and undoped InSb) exceed HTP of conventional SiO2_2 by activating more surface plasmon channels in the infrared range[25]. Noble metals (Au, Ag, Cu) display large HTP over semiconductors due to the high reflectivity at interfaces[26]. Oxides or fluorides that support surface phonon polaritons (Al2_2O3_3 or MgF2_2) create near-field radiation fivefold larger than the untailored SiO2_2 at given separations[27]. Hyperbolicity in layered transition metal dichalcogenides (bulk TiS2_2)[28] also brings promise to enhancing HTP compared to the materials without hyperbolicity. Since radiative heat transfer is a material-dependent phenomenon, efforts towards systematic studies of optimized materials for significant gain in thermal power are needed.

Recent studies have shown that 2D materials may have certain advantages for thermal radiation in the near-field regime due to stronger light-matter interactions in MoS2_2, MoSe2_2, WS2_2, and WSe2_2 monolayers when compared to their 3D counterparts[29]. 2D Dirac metals with their unique electronic structure can also experience higher order of magnitude in HTP than the bulk materials[30]. First-principles studies show that layered β\beta-GeSe can exhibit pronounced spectral heat flux at given carrier density[31]. Metallic multilayer structures due to excited surface states give HTP that is about 40 times higher than the semi-infinite setup[32]. Considering their high efficiency in heat modulation and energy harness at specific subwavelength scale, 2D materials are attracting research interests for near-field applications. Building datasets of optical properties of 2D materials, such as transmittance, absorbance, and reflectance, as well as the decay emission rates associated with the Purcell factor[19, 33] is an important step towards a broader materials-dependent understanding of optical phenomena at the nanoscale.

Radiative heat transfer is a materials dependent phenomenon, thus a deeper understanding of the relation between the intrinsic properties of different composition and the thermal power is necessary. Recent studies have shown that some 2D materials have the ability to confine and control the heat radiation due to their superior electromagnetic properties. At this point, a data-driven approach focusing on a large number of nanoscaled systems is needed to broaden our materials perspective of near field transfer. In this study, we focus on the radiative heat transfer power in a family of transition metal dichalcogenide monolayered materials with trigonal p3ˉm1p\bar{3}m1 (T) and hexagonal pˉ6m1\bar{p}6m1 (H) symmetries. These calculations are based on the electronic and optical properties of each system obtained from first principles. The computational results are interpreted in terms of simpler analytical models which show clear relations between materials properties and radiative heat transfer control.

Results and Discussion The computed optical response is then utilized to calculate HTP from Eq. (1). In Figure 2, we show the radiative heat transfer normalized to black body radiation ΦBB=σSB(T14−T24)\Phi_{\mathrm{BB}} = \sigma_{\mathrm{SB}}(T_1^4-T_2^4) by giving the results for semiconductors and metals separately, where σSB\sigma_{\mathrm{SB}} is the Stefan-Boltzmann constant. Figure 2b shows that HTP in metals is several orders bigger than the semiconductors HTP in Figure 2a. Each group has similar behaviors suggesting underlying commonalities, and the radiative heat transfer can vary by several orders of magnitude depending on the materials properties. For example, NiSe2_2 (T) and TiTe2_2 (H) exhibit the largest ΦHTP\Phi_{HTP} among the semiconductors with ΦHTPΦBB∼104\frac{\Phi_{HTP}}{\Phi_{BB}} \sim10^{4} for d<5d < 5 nm. In comparison, HTP for PbS2_2 (H) drops down by several orders of magnitude. For metals, GeSe2_2 (T) outperforms the other materials especially for the distance range d<10d < 10 nm, where ΦHTPΦBB∼106\frac{\Phi_{HTP}}{\Phi_{BB}} \sim10^{6}. On the other hand, TaS2_2 (T) and PSe2_2 (T) have the lowest radiative thermal power ΦHTPΦBB∼104\frac{\Phi_{HTP}}{\Phi_{BB}} \sim10^{4} in the same distance range. Figure 2b also shows that for d>50d > 50 nm, there is little difference between ΦHTP\Phi_{HTP} for the different metallic monolayers, which indicates that the individual properties of the materials do not influence significantly their radiative heat power capabilities.

HTP normalized to black body radiation for semiconductors and metals

Figure 2. HTP normalized to the black body radiation in Stefan-Boltzmann law ΦBB=σSB(T14−T24)\Phi_{\mathrm{BB}} = \sigma_{\mathrm{SB}}(T_1^4-T_2^4) as a function of separation distance dd for (a) semiconductors and (b) metals in all symmetries. Temperatures are taken as T1=300 KT_1 = 300\,K, T2=400KT_2 = 400K. The insert in panel (b) shows a blow-up of the d=50∼60d = 50\sim60 nm range.

From the results in Figure 1 (PDF p. 4)a, we find that practically all 2D semiconductors experience Φ∼1/d4\Phi\sim1/d^{4} at separations d<100d < 100 nm. HTP is exclusively determined by the evanescent contribution of the pp-modes since the propagating modes result in Φpr\Phi_{pr} being several orders of magnitude smaller (see Fig. S1 in supporting information (SI)). In Figure 2a, the displayed scaling behavior is consistent with the radiative heat transfer mediated by pp-mode contributions between identical 2D semiconductors [28]

Schematic representation for radiative heat transfer between planar monolayers

Figure 1 (PDF p. 4). Schematic representation for radiative heat transfer between planar monolayers of AB2AB_{2} compositions in (a) H layer group symmetry and (b) T layer group symmetry by holding the two layers at different temperature T1T_{1} and T2T_{2}. The interlayer separation is dd and the monolayer thickness is l2Dl_{2D}.

Φevp(d)≈1d4[1+16πd(∂σimg∂ω)ω=0][π4kB4(T14−T24)40ℏ3][(∂2σreal∂ω2)ω=0]2(1)\Phi_{\mathrm{ev}}^{p}(d) \approx\frac{1}{d^{4}}\left[1+\frac{16\pi}{d}\left(\frac{\partial\sigma^{\mathrm{img}}}{\partial\omega}\right)_{\omega=0}\right]\left[\frac{\pi^{4}k_{B}^{4}(T_{1}^{4}-T_{2}^{4})}{40\hbar^{3}}\right]\left[\left(\frac{\partial^{2}\sigma^{\mathrm{real}}}{\partial\omega^{2}}\right)_{\omega=0}\right]^{2} \tag*{(1)}

where (∂2σreal∂ω2)ω=0=l2D2πω02γω04\left(\frac{\partial^{2}\sigma^{\mathrm{real}}}{\partial\omega^{2}}\right)_{\omega=0}=\frac{l_{2D}}{2\pi}\frac{\omega_{0}^{2}\gamma}{\omega_{0}^{4}} and (∂σimg∂ω)ω=0=−l2D4πω02ω02\left(\frac{\partial\sigma^{\mathrm{img}}}{\partial\omega}\right)_{\omega=0}=-\frac{l_{2D}}{4\pi}\frac{\omega_{0}^{2}}{\omega_{0}^{2}}. The above expression is obtained based on a single oscillator Drude-Lorentz model for the monolayer optical conductivity given by

σ(ω)=l2D4πωa2γ2(ω02−ω2)2+ω2γ2⋅ω2−i⋅l2D4πωa2(ω02−ω2)(ω02−ω2)2+ω2γ2⋅ω\sigma(\omega)=\frac{l_{2D}}{4\pi}\frac{\omega_a^2\gamma^2}{(\omega_0^2-\omega^2)^2+\omega^2\gamma^2}\cdot\omega^2-i\cdot\frac{l_{2D}}{4\pi}\frac{\omega_a^2(\omega_0^2-\omega^2)}{(\omega_0^2-\omega^2)^2+\omega^2\gamma^2}\cdot\omega

(in Gaussian units) where ωa\omega_a is the Lorentzian oscillation strength, ω0\omega_0 is the interband transition frequency, and γ\gamma is the scattering rate. Since the near field radiation is mainly influenced by exchanged photonic energy at the electrostatic limit when frequency is small, the analytical expression for Φevp(d)\Phi_{ev}^{p}(d) is found by exploring the σ(ω→0)\sigma(\omega\to0) limit.

While Eq. 6 captures the d−4d^{-4} distance dependence, the magnitude of ΦHTP\Phi_{HTP} varies in a wide range for the considered materials, as also noted above. For example, at d=10nmd=10\mathrm{nm}, we find that ΦHTPΦBB=(10−7,10)\frac{\Phi_{HTP}}{\Phi_{BB}}=(10^{-7},10) for materials in H-symmetry and ΦHTPΦBB=(10−6,10−1)\frac{\Phi_{HTP}}{\Phi_{BB}}=(10^{-6},10^{-1}) for structures in T-symmetry. Eq. 6 suggests that the magnitude is controlled primarily by the derivative of the real part of conductivities (∂2σreal∂ω2)ω=0\left(\frac{\partial^2\sigma^{real}}{\partial\omega^2}\right)_{\omega=0} and to a lesser extent by the imaginary counterpart (∂σimg∂ω)ω=0\left(\frac{\partial\sigma^{img}}{\partial\omega}\right)_{\omega=0}. The Drude-Lorentz model used to obtain Eq. 6 shows that the strength of the Lorentzian oscillator ωa\omega_a and its location ω0\omega_0 play a crucial role in determining the HTP magnitude. Since these are materials related properties, we further examine how the underlying electronic structure for each monolayer affects the characteristic behavior.

In Figure 3a, we show how ΦHTPΦBB\frac{\Phi_{HTP}}{\Phi_{BB}} evolves as a function of (∂2σreal∂ω2)ω=0\left(\frac{\partial^2\sigma^{real}}{\partial\omega^2}\right)_{\omega=0}. Here ∂2σreal∂ω2\frac{\partial^2\sigma^{real}}{\partial\omega^2} is obtained a numerical derivative with respect to frequency from the computationally obtained optical conductivity for each material. There is a general upward trend of HTP in terms of (∂2σreal∂ω2)ω=0\left(\frac{\partial^2\sigma^{real}}{\partial\omega^2}\right)_{\omega=0} which demonstrates that larger (∂2σreal∂ω2)ω=0\left(\frac{\partial^2 \sigma^{real}}{\partial\omega^2}\right)_{\omega=0} results in larger transfer energy power. We find that for the majority of the materials, HTP scales are very similarly to [(∂2σreal∂ω2)ω=0]2\left[\left(\frac{\partial^2 \sigma^{real}}{\partial\omega^2}\right)_{\omega=0}\right]^2 consistent with analytical behavior in Eq. 6.

Heat transfer power for 2D semiconductors normalized to the black body limit

Figure 3. Heat transfer power for 2D semiconductors normalized to the black body limit with respect to: (a) (∂2σreal∂ω2)ω=0\left(\frac{\partial^2 \sigma^{real}}{\partial\omega^2}\right)_{\omega=0}, (b) the energy band gap EgE_g, (c) the static dielectric constant ε0\varepsilon_0, and (d) the Drude oscillator strength Ωa\Omega_a at separations d=6nm,10nm,20nm,100nmd = 6nm, 10nm, 20nm, 100nm. Each discrete point corresponds to data for a specific material, found in Table S1 in the SI file.

The Lyddane-Sachs-Teller relation[34, 35] shows that the Lorentz oscillation strength ωa\omega_a and the transverse optical phonon frequency ω0\omega_0 in the Drude-Lorentz model are connected with the static dielectric constant ε0\varepsilon_0 and high frequency dielectric function ε∞\varepsilon_\infty according to ωa2ω02∼ε0ε∞\frac{\omega_a^2}{\omega_0^2} \sim\frac{\varepsilon_0}{\varepsilon_\infty}.

Additionally, it has been shown that for low dimensional semiconductors [36] ε0\varepsilon_0 is linked with the band gap EgE_g, such that ε0∼1Eg2\varepsilon_0 \sim\frac{1}{E_g^2}. These relations indicate that the radiative heat power is correlated with ε0\varepsilon_0 and EgE_g, thus in Figure 3b,Figure 3c we show how ΦHTPΦBB\frac{\Phi_{\mathrm{HTP}}}{\Phi_{\mathrm{BB}}} evolves as a function of these quantities computed for each material. In particular, the overall trends suggest ΦHTPΦBB\frac{\Phi_{\mathrm{HTP}}}{\Phi_{\mathrm{BB}}} decreases as EgE_g is increased, while there is an ascending trend of HTP with ε0\varepsilon_0. These heat transfer-property correlations can help us understand radiative thermal power for specific materials. For example, TiTe2_2 in H-symmetry generates the greatest HTP among all semiconductors due to its small band gap and strong dielectric response at the small frequency range (also see Fig. S13). The corresponding parameter (∂2σreal∂ω2)ω=0\left(\frac{\partial^2\sigma^{real}}{\partial\omega^2}\right)_{\omega=0} of TiTe2_2 is the largest compared to other semiconductors reinforcing the predication by the model. In contrast, PbS2_2 (H) has the weakest HTP which results from its smallest (∂2σreal∂ω2)ω=0\left(\frac{\partial^2\sigma^{real}}{\partial\omega^2}\right)_{\omega=0} related to the large band gap and small dielectric response (also see Fig. S10).

Let us also examine how the radiative heat power changes with respect to the Lorentzian strength.

Although we consider the simplest Drude-Lorentz model for Eq. 6, the computationally obtained optical response contains multiple peaks from different transitions determined by the electronic structure of the materials. From the simulations, we are able to obtain the collective Lorentzian strength from multiple peaks [23, 37] according to the Thomas-Reiche-Kuhn sum rule Ωp2=∑n=1Nωa,n2\Omega_p^2 = \sum_{n=1}^{N}\omega_{a,n}^2, where ωa,n\omega_{a,n} is the Lorentzian oscillator at nth^{\mathrm{th}} peak. In Figure 3d, we show HTP as function of Ωp\Omega_p calculated for each material. There is an oscillatory-like functionality without a clear trend between ΦHTP\Phi_{HTP} and Ωp\Omega_p. This is attributed to the presence of multiple optical transitions as dictated by the electronic structure, which goes beyond the small frequency limit used for Eq. 6.

The material dependence of the heat transfer between the 2D metals can be performed in a similar way. Using a Drude-model for the optical response σ(ω)=l2Dωp24πi(ω−iγ)\sigma(\omega) = \frac{l_{2D}\omega_p^2}{4\pi i(\omega-i\gamma)} where ωp\omega_p is the plasma frequency and γ\gamma is the scattering rate, we find that for a good conductor (γ≪ω\gamma\ll\omega), Re(σ)≈Σω2Re(\sigma) \approx\frac{\Sigma}{\omega^2} with Σ=l2Dωp2γ4π\Sigma= \frac{l_{2D}\omega_p^2\gamma}{4\pi}. The radiative heat transfer from Eq. (1) is practically determined by the evanescent p-polarized modes, such that[28]

Φevp(d)≈1d[3ζ(5)kB5(T15−T25)4π2ℏ4Σ]+1d2[kB2(T12−T22)16(48π2)23ℏe−(d0d)13],(2)\Phi_{ev}^{p}(d) \approx\frac{1}{d}\left[\frac{3\zeta(5)k_{B}^{5}(T_{1}^{5}-T_{2}^{5})}{4\pi^{2}\hbar^{4}\Sigma}\right]+\frac{1}{d^{2}}\left[\frac{k_{B}^{2}(T_{1}^{2}-T_{2}^{2})}{16(48\pi^{2})^{\frac{2}{3}}\hbar}e^{-\left(\frac{d_{0}}{d}\right)^{\frac{1}{3}}}\right], \tag*{(2)}

where d0≈48π2ℏ3ΣkB2T3d_{0} \approx\frac{\sqrt{48\pi^{2}\hbar^{3}\Sigma}}{k_{B}^{2}T^{3}}. The above expression shows that there is a change in the scaling law of the radiative power depending on how the distance separation compares to d0d_{0}. At the short separation limit (d≪d0d \ll d_{0}), the exponential term in the second term approaches zero, leading to ΦHTPΦBB∼1d\frac{\Phi_{HTP}}{\Phi_{BB}} \sim\frac{1}{d}. At large separations (d≫d0d \gg d_{0}), the exponential factor is close to unity giving ΦHTPΦBB∼1d2\frac{\Phi_{HTP}}{\Phi_{BB}} \sim\frac{1}{d^{2}}. This behavior is seen in Figure 2b, where ΦHTPΦBB∼1d\frac{\Phi_{HTP}}{\Phi_{BB}} \sim\frac{1}{d} for d<10d < 10 nm, while ΦHTPΦBB∼1d2\frac{\Phi_{HTP}}{\Phi_{BB}} \sim\frac{1}{d^{2}} for d>100d > 100 nm. Eq.7 also tells us that the short distance limit is material dependent through the Σ\Sigma parameter, while the long-distance regime is mostly material independent. This can also be seen in Figure 2b, where for d>50d > 50 nm ΦHTPΦBB\frac{\Phi_{HTP}}{\Phi_{BB}} converges to very similar values for practically all materials.

In Figure 4a, we show how HTP changes as a function of d0=48π2ℏ3ΣkB3T33d_0 = \sqrt[3]{\frac{48\pi^2\hbar^3\Sigma}{k_B^3T^3}} for the different materials, where Σ\Sigma is found computationally for each metal. For smaller separations (d=6 nmd = 6\,\mathrm{nm}, for example), there is a nonlinear decreasing trend of ΦHTPΦBB\frac{\Phi_{HTP}}{\Phi_{BB}} as d0d_0 increases. As the separation between the layers becomes larger, this trend becomes less apparent and for d=100 nmd = 100\,\mathrm{nm}, ΦHTPΦBB\frac{\Phi_{HTP}}{\Phi_{BB}} becomes almost independent of d0d_0.

Heat transfer power for 2D metals as a function of transition distance, plasma frequency, and Fermi energy

Figure 4. Heat transfer power for 2D metals normalized to the black body limit with respect to: (a) transition distance d0d_0 (also see SFig. 61), (b) plasma frequency ωp\omega_p, and (c) Fermi energy at the separation of 6 nm, 10 nm, 20 nm, and 100 nm, respectively. The materials details are given in Table S2 in the SI file.

The materials dependence in Σ\Sigma is controlled by plasma frequency, a property directly accessible from simulations. In Figure 4b we give ΦHTPΦBB\frac{\Phi_{HTP}}{\Phi_{BB}} vs ωp\omega_p for each metal. A downward trend for smaller separations (shown d=6,10,20 nmd = 6, 10, 20\,\mathrm{nm}) is consistent with ΦHTPΦBB∼1ωp2\frac{\Phi_{HTP}}{\Phi_{BB}} \sim\frac{1}{\omega_p^2}, while for d=100 nmd = 100\,\mathrm{nm}, ΦHTPΦBB\frac{\Phi_{HTP}}{\Phi_{BB}} is almost independent of ωp\omega_p. This is also consistent with the theoretical modeling from Eq. 7, showing that for d<d0d < d_0, ΦHTPΦBB∼1Σ∼1ωp2\frac{\Phi_{\mathrm{HTP}}}{\Phi_{\mathrm{BB}}} \sim\frac{1}{\Sigma} \sim\frac{1}{\omega_p^2}, while for d>d0d > d_0, ΦHTPΦBB\frac{\Phi_{\mathrm{HTP}}}{\Phi_{\mathrm{BB}}} depends very weakly on the properties of the material. These correlations can be exemplified for specific materials. For example, ΦHTPΦBB\frac{\Phi_{\mathrm{HTP}}}{\Phi_{\mathrm{BB}}} of GeSe2\mathrm{GeSe}_2 (H) is the highest due to its smallest Σ\Sigma and ωp\omega_p, while TaS2\mathrm{TaS}_2 (T) and PSe2\mathrm{PSe}_2 (T) generate the lowest HTP by their relatively high plasma frequency and conductivity (Table S2 in the SI file). At larger separations (d=100d = 100 nm shown), all metals have similar heat transfer regardless of their properties. This can be understood by recognizing that surface plasmon excitations confined to metallic surfaces are effective channels for HTP enhancement at smaller separations. The materials dependent nature of these channels is seen in the variation of ΦHTP\Phi_{\mathrm{HTP}} shown in Figure 4. At larger dd, however, the contribution from surface plasmon is much diminished and HTP mainly results from the energy exchange of multi-reflected EM waves between the monolayers. Thus, the intensity of the radiative thermal power is determined by the size of cavity but not the materials properties.

Another property accessible from the first principles simulations is the Fermi energy EFE_F, which is closely related to the ability of metals to conduct electricity. In Figure 4c, we show how ΦHTPΦBB\frac{\Phi_{\mathrm{HTP}}}{\Phi_{\mathrm{BB}}} changes as a function of EFE_F for the considered metallic monolayers. The behavior is highly non-monotonic without an emergent trend. There are different oscillatory like patterns that are more pronounced for shorter separations (d=6d = 6, 10, 20 nm shown) and for larger dd, the heat transfer is completely independent of EFE_F.

Conclusions We investigate the property of radiative thermal power generated between 2D materials from the transition metal dichalcogenide family with hexagonal and trigonal symmetries.

The thermal power is calculated from the electromagnetic Poynting vector, while the electronic and optical properties for each monolayer are obtained from first principles simulations. Such an approach ensures a realistic representation of thermal radiation and the involved materials. The results for 58 monolayers H- and T-symmetry (covering 31 semiconductors and 27 metals) materials altogether are also analyzed in terms of simpler Drude and Drude-Lorentz models. The analytical expressions highlight commonalities, such as the scaling law for 2D metals and semiconductors. The 1/d41/d^{4} distance dependence is characteristic for the semiconducting monolayers, while there is 1/d1/d to 1/d21/d^{2} transition for the metals.

Within these scaling laws, the heat transfer power can vary by several orders of magnitude depending on the particular material. The analytical modeling highlights the specific properties that are directly related to modulating the strength of thermal radiation. For semiconductors, we find that the real part of the conductivity, the band gap and dielectric constant show direct correlations with the radiative heat. In particular, systems with small energy gap and large dielectric constant exhibit larger HTP. For metals, on the other hand, the plasma frequency (which also enters in the composite Σ\Sigma parameter) is perhaps the most effective control knob, especially for smaller separations in the near field regime. It is interesting to note that materials with smaller ωp\omega_{p} have larger HTP as opposed to those whose ωp\omega_{p} have much enhanced values. On the other hand, the lack of clear relation with respect to the Fermi level indicates a complex relation with the radiative thermal power.

This study shows that the realistic modeling of radiative thermal phenomena requires an integrative approach between analytical and computational calculations. While the scaling laws for metals and semiconductors are fairly robust, the heat transfer can be controlled by the properties of the materials involved. Here we have focused on the class of transition metal dichalcogenides, however, this approach can be extended by including other 2D materials such as triangular polymorph and orthorhombic metals or semiconductors with pmmmpmmm and p2mmp2mm symmetry[33, 38]. Building a database for radiative heat transfer can broaden the materials understanding of this phenomenon and the data can be used for AI/ML models for much advanced materials predictions.

Methodology The theoretical modeling here relies on the electronic structure of each material as obtained from density functional theory (DFT). Our DFT simulations rely on the projector augmented wave (PAW) pseudopotentials and generalized gradient approximation-Perdew Burke Ernzerhof (GGA-PBE) exchange-correlation functionals for self-consistent field calculations. The unit cells of the 2D layers are constructed by using their symmetries. Here we consider the 2D compounds with the chemical formula AB2AB_2. Materials, such as CoTe2\mathrm{CoTe_2}, CrS2\mathrm{CrS_2}, CrSe2\mathrm{CrSe_2}, CrTe2\mathrm{CrTe_2}, CuTe2\mathrm{CuTe_2}, HfSe2\mathrm{HfSe_2}, HfTe2\mathrm{HfTe_2}, MoS2\mathrm{MoS_2}, MoSe2\mathrm{MoSe_2}, MoTe2\mathrm{MoTe_2}, NbSe2\mathrm{NbSe_2}, NiSe2\mathrm{NiSe_2}, NiTe2\mathrm{NiTe_2}, PbS2\mathrm{PbS_2}, PbSe2\mathrm{PbSe_2}, TaS2\mathrm{TaS_2}, TiSe2\mathrm{TiSe_2}, TiTe2\mathrm{TiTe_2}, WS2\mathrm{WS_2}, WSe2\mathrm{WSe_2}, WTe2\mathrm{WTe_2}, ZrTe2\mathrm{ZrTe_2} fall into the hexagonal p6ˉm1p\bar{6}m1 (H) symmetry and candidates, for instance, AsS2\mathrm{AsS_2}, AsSe2\mathrm{AsSe_2}, AsTe2\mathrm{AsTe_2}, GeS2\mathrm{GeS_2}, GeSe2\mathrm{GeSe_2}, GeTe2\mathrm{GeTe_2}, HfS2\mathrm{HfS_2}, HfSe2\mathrm{HfSe_2}, HfTe2\mathrm{HfTe_2}, NbS2\mathrm{NbS_2}, NbSe2\mathrm{NbSe_2}, NbTe2\mathrm{NbTe_2}, NiS2\mathrm{NiS_2}, NiSe2\mathrm{NiSe_2}, NiTe2\mathrm{NiTe_2}, PdS2\mathrm{PdS_2}, PdSe2\mathrm{PdSe_2}, PdTe2\mathrm{PdTe_2}, PSe2\mathrm{PSe_2}, PtS2\mathrm{PtS_2}, PtSe2\mathrm{PtSe_2}, PtTe2\mathrm{PtTe_2}, SbS2\mathrm{SbS_2}, SbSe2\mathrm{SbSe_2}, SbTe2\mathrm{SbTe_2}, ScSe2\mathrm{ScSe_2}, SnS2\mathrm{SnS_2}, SnSe2\mathrm{SnSe_2}, SnTe2\mathrm{SnTe_2}, TaS2\mathrm{TaS_2}, TaSe2\mathrm{TaSe_2}, TaTe2\mathrm{TaTe_2}, TiTe2\mathrm{TiTe_2}, ZrS2\mathrm{ZrS_2}, ZrSe2\mathrm{ZrSe_2}, ZrTe2\mathrm{ZrTe_2} with the trigonal p3ˉm1p\bar{3}m1 (T) symmetry. To avoid inter-layer interactions, the materials are separated by ∼20 A˚\sim20\,\text{\AA} layers arranged in a 3D framework. The imposed relaxation criteria are 10−810^{-8} eV for energy conservation and 0.0015 eV A˚−1\text{\AA}^{-1} for force conservation. The Gaussian smearing method with default smearing width 0.05 is chosen for all considered systems.

The dielectric function components ε=diag⁡(ε∥(ω),ε∥(ω),ε⊥(ω))\boldsymbol{\varepsilon} = \operatorname{diag}\left(\varepsilon_{\parallel}(\omega), \varepsilon_{\parallel}(\omega), \varepsilon_{\perp}(\omega)\right) are computed using the VASP and GPAW code[39] codes. We find that the VASP code renders better results for ε\boldsymbol{\varepsilon} of semiconductors due to more accurate band structures. On the other hand, the GPAW code is better suited for metals since it allows a uniform real-space grid scheme especially for small frequencies as part of the utilized Linear Combination of Atomic Orbitals (LCAO) approach. In both scenarios, the linear dielectric response χ0\chi_0 is found based on the ground state non-interacting susceptibility in which the Fourier coefficients of χ0\chi_0, expanded in Bloch functions, are given in the Adler-Wiser method[40, 41]. The interacting dielectric response functions are then solved from the Dyson’s equation in the random field approximation (RPA) by considering local field effects and long-wavelength limit. The imaginary and real dielectric function components are related by using the Kramers-Kronig transformation. Relaxation scattering time is selected to be 10meV for all candidates. Monkhorst-Pack KPOINTS density is 10 Å−1^{-1} used in GPAW, which is almost equivalent to 12 ×\times 12 ×\times 1 applied in VASP scheme. The convergence of the KPOINTS is also shown in Fig. S60 for MoSe2_2 (semiconductor) and TaS2_2 (metal) calculated by using VASP and GPAW code.

Thermal radiation between two planar 2D monolayers held at different temperatures can be theoretically described by using fluctuation-dissipation theory. The thermally induced current and the electromagnetic field effect are framed under Maxwell’s relations[6, 42, 43]. Provided the separation distance (dd) and the temperature difference (T1T_1 and T2T_2) for each layer, the Heat Transfer Power (ΦHTP\Phi_{HTP}) is calculated from the ensemble average of the Poynting vector[28], yielding

ΦHTP(d)=∫0∞dω2πΔΠ(ω,T)∫0∞d2q(2π)2ξ(ω,q,d)(3)\Phi_{HTP}(d) = \int_{0}^{\infty} \frac{\mathrm{d}\omega}{2\pi} \Delta\Pi(\omega,T) \int_{0}^{\infty} \frac{\mathrm{d}^{2}\mathbf{q}}{(2\pi)^{2}} \xi(\omega,\mathbf{q},d) \tag*{(3)}

where ΔΠ(ω,T)\Delta\Pi(\omega,T) is the difference between Bose-Einstein distribution functions Π(ω,T1,2)=ℏω(eℏω/kBT1,2−1)−1\Pi(\omega,T_{1,2}) = \hbar\omega\left(e^{\hbar\omega/k_{B}T_{1,2}}-1\right)^{-1}, which statistically describes the net mean energy across the plates. In the spectral function ξ(ω,q,d)\xi(\omega,\mathbf{q},d), the separation dd between the monolayers is shown in Figure 1 (PDF p. 4) and q\mathbf{q} is the surface component of wave vector k=(q,kz)\mathbf{k}=(\mathbf{q},k_z) with its normal component kz=ω2/c2−q2k_z=\sqrt{\omega^{2}/c^{2}-q^{2}} (cc is the speed of light). The relative magnitude of ∣q∣|\mathbf{q}| with respect to ω/c\omega/c differentiates the wave evanescence (evev) and propagation (prpr) modes in the spectral function, and these contributions can be formulated as [44],

ξ(ω,q,d)={Tr⁡[(I−R2∗R2−T2∗T2)D12(I−R1R1∗−T1∗T1)D12∗]∣q∣<ω/cTr⁡[(R2∗−R2)D12(R1−R1∗)D12∗]e−2∣kz∣d∣q∣>ω/c(4)\xi(\omega,\mathbf{q},d)= \begin{cases} \operatorname{Tr}\left[(\mathbb{I}-\mathbb{R}_{2}^{*}\mathbb{R}_{2}-\mathbb{T}_{2}^{*}\mathbb{T}_{2})\mathbb{D}_{12}(\mathbb{I}-\mathbb{R}_{1}\mathbb{R}_{1}^{*}-\mathbb{T}_{1}^{*}\mathbb{T}_{1})\mathbb{D}_{12}^{*}\right] & |\mathbf{q}|<\omega/c \\ \operatorname{Tr}\left[(\mathbb{R}_{2}^{*}-\mathbb{R}_{2})\mathbb{D}_{12}(\mathbb{R}_{1}-\mathbb{R}_{1}^{*})\mathbb{D}_{12}^{*}\right]e^{-2|k_z|d} & |\mathbf{q}|>\omega/c \end{cases} \tag*{(4)}

where the Fresnel reflection matrix R1,2\mathbb{R}_{1,2} is a 2×22 \times2 matrix R1,2=[R1,2ssR1,2spR1,2psR1,2pp]\mathbb{R}_{1,2}=\begin{bmatrix}R_{1,2}^{ss} & R_{1,2}^{sp}\\ R_{1,2}^{ps} & R_{1,2}^{pp}\end{bmatrix} and D12=\mathbb{D}_{12}=

11−R1R2e2ikzd\frac{1}{1-\mathbb{R}_{1}\mathbb{R}_{2}e^{2ik_zd}}

For isotropic materials, the Fresnel reflection matrix is diagonal with terms corresponding to ss- and pp-polarized modes. It can be derived from standard electromagnetic boundary conditions for the planar geometry in Figure 1 (PDF p. 4),

R1,2ss(q,ω)=−2πcσ(ω)1−c2ω2q2+2πcσ(ω),R1,2pp(q,ω)=2πcσ(ω)11−c2ω2q2+2πcσ(ω).(5)R^{ss}_{1,2}(q,\omega)=-\frac{\frac{2\pi}{c}\sigma(\omega)}{\sqrt{1-\frac{c^2}{\omega^2}q^2+\frac{2\pi}{c}\sigma(\omega)}}, \qquad R^{pp}_{1,2}(q,\omega)=\frac{\frac{2\pi}{c}\sigma(\omega)}{\frac{1}{\sqrt{1-\frac{c^2}{\omega^2}q^2}}+\frac{2\pi}{c}\sigma(\omega)}. \tag*{(5)}

where σ(ω)\sigma(\omega) is the optical conductivity of the monolayered material. With the Fresnel reflection matrix R1,2\mathbb{R}_{1,2}, the transmission matrix T1,2\mathbb{T}_{1,2}[30, 45] can be found by using T1,2=I−R1,2\mathbb{T}_{1,2}=\mathbb{I}-\mathbb{R}_{1,2}.

Eqs. 1-5 establish the general framework for calculating the radiative heat transfer between isotropic 2D materials specified by their optical conductivities. In this study, we investigate a group of transition metal dichalcogenide (TMD) monolayers with the chemical formula AB2\mathrm{AB}_2 (A = Cr, Hf, Mo, Pb, Ti, W, Zr, Ge, Ni, P, Pd, Pt, Sn, Co, Cu, Nb, Ta, As, Sb, Sc, and B = S, Se, Te) by first computing their optical properties as described below. Layered group symmetries of these structures are categorized into trigonal p3ˉm1p\bar{3}m1 (T) and hexagonal p6ˉm1p\bar{6}m1 (H) symmetries, which takes up about ∼35%\sim35\% of all 2D AB2\mathrm{AB}_2 configurations in the Computational 2D Materials Database (C2DB)[38]. In particular, we consider 22 monolayers in the H-symmetry and 36 monolayers in T-symmetry, which are non-magnetic and dynamically stable. Some of these TMD AB2\mathrm{AB}_2 systems were shown to have large optical reflections and strong emission properties[33]. Their 3D layered counterparts can have optical hyperbolicity with various decay rates of spontaneous emission due to tunable Purcell factors[19]. These materials may meet the demand of single photon sources over a quantum communication channel as required by quantum information technology[46].

For this study we utilize first principles simulations as implemented in the VASP and GPAW codes (See above) to compute the dielectric function components ε=diag⁡(ε∥(ω),ε∥(ω),ε⊥(ω))\boldsymbol{\varepsilon} = \operatorname{diag}\left(\varepsilon_{\parallel}(\omega), \varepsilon_{\parallel}(\omega), \varepsilon_{\perp}(\omega)\right) based on the electronic structure of the materials (See Figs. S2-S59 in supplementary file). The planar conductivity of each monolayered material is obtained as σ(ω)=(ε∥(ω)−1)ωl2D4πi\sigma(\omega) = \frac{(\varepsilon_{\parallel}(\omega)-1)\omega l_{2D}}{4\pi i} (in Gaussian unit), where l2Dl_{2D} is the thickness of the atomic layer.

Associated Content

Information of normalized near field heat transfer power for categorized symmetries, dielectric and electronic property of each candidate material, descriptors of metals and semiconductors, convergence test for k-points mesh used in VASP and GPAW. (PDF)

Author Information

Corresponding Author

*Lilia M. Woods, Department of Physics, University of South Florida, Tampa FL 33620, USA. https://orcid.org/0000-0002-9872-1847; E-mail: [email protected]

Authors

*Long Ma, Department of Physics, University of South Florida, Tampa FL 33620, USA.

https://orcid.org/0000-0003-3839-2604; E-mail: [email protected]

*Dai-Nam Le, Department of Physics, University of South Florida, Tampa FL 33620, USA.

https://orcid.org/0000-0003-0756-8742; E-mail: [email protected]

Author Contributions

The project was conceived and designed by L.M.W. The simulations were performed by performed by L.M and the modeling was done by D.N.L. The analysis and manuscript writing was done by L.M.W and L.M. with contributions from D.N.L.

Conflicts

The authors declare no competing interests.

Data Availability

The data supporting this article (results from first principles simulations of the electronic and dielectric properties of the considered 2D materials) is included in the main text and the Supplementary Information file.

Acknowledgment

This work is supported by the US Department of Energy under Grant No.DE-FG02-06ER46297.

Computational resources are provided by USF Research Computing.

References

  1. [1]Callen, H. B. The Application of Onsager’s Reciprocal Relations to Thermoelectric, Thermomagnetic, and Galvanomagnetic Effects. Physical Review 1948, 73 (11), 1349–1358. https://doi.org/10.1103/PhysRev.73.1349.
  2. [2]Agarwal, G. S. Quantum Electrodynamics in the Presence of Dielectrics and Conductors. IV. General Theory for Spontaneous Emission in Finite Geometries. Phys Rev A (Coll Park) 1975, 12 (4), 1475–1497. https://doi.org/10.1103/PhysRevA.12.1475.
  3. [3]Li, Y.; Li, W.; Han, T.; Zheng, X.; Li, J.; Li, B.; Fan, S.; Qiu, C. W. Transforming Heat Transfer with Thermal Metamaterials and Devices. Nature Reviews Materials 2021 6:6 2021, 6 (6), 488–507. https://doi.org/10.1038/s41578-021-00283-2.
  4. [4]Li, W.; Shi, Y.; Chen, K.; Zhu, L.; Fan, S. A Comprehensive Photonic Approach for Solar Cell Cooling. ACS Photonics 2017, 4 (4), 774–782. https://doi.org/10.1021/acsphotonics.7b00089.
  5. [5]Hu, L.; Narayanaswamy, A.; Chen, X.; Chen, G. Near-Field Thermal Radiation between Two Closely Spaced Glass Plates Exceeding Planck’s Blackbody Radiation Law. Appl Phys Lett 2008, 92 (13), 1-3. https://doi.org/10.1063/1.2905286.
  6. [6]Volokitin, A. I.; Persson, B. N. J. Near-Field Radiative Heat Transfer and Noncontact Friction. Rev Mod Phys 2007, 79 (4), 1291–1329. https://doi.org/10.1103/REVMODPHYS.79.1291/FIGURES/18/MEDIUM.
  7. [7]Joulain, K.; Mulet, J.-P.; Marquier, F.; Carminati, R.; Greffet, J.-J. Surface Electromagnetic Waves Thermally Excited: Radiative Heat Transfer, Coherence Properties and Casimir Forces Revisited in the Near Field. Surf Sci Rep 2005, 57 (3–4), 59–112. https://doi.org/10.1016/j.surfrep.2004.12.002.
  8. [8]Janipour, M.; Misirlioğlu, I. B.; Sendur, K. Tunable Surface Plasmon and Phonon Polariton Interactions for Moderately Doped Semiconductor Surfaces. Sci Rep 2016, 6 (1), 34071, 1-11. https://doi.org/10.1038/srep34071.
  9. [9]Ben-Abdallah, P.; Biehs, S.-A.; Joulain, K. Many-Body Radiative Heat Transfer Theory. Phys Rev Lett 2011, 107 (11), 114301, 1-5. https://doi.org/10.1103/PhysRevLett.107.114301.
  10. [10]Liu, X.; Wang, L.; Zhang, Z. M. Near-Field Thermal Radiation: Recent Progress and Outlook. Nanoscale and Microscale Thermophysical Engineering 2015, 19 (2), 98–126. https://doi.org/10.1080/15567265.2015.1027836.
  11. [11]Ben-Abdallah, P.; Biehs, S.-A. Near-Field Thermal Transistor. Phys Rev Lett 2014, 112 (4), 044301, 1-5. https://doi.org/10.1103/PhysRevLett.112.044301.
  12. [12]Huang, H.; Shan, S.; Zhou, Z. Near-Field Thermal Diode Based on 2D Gratings. Int J Heat Mass Transf 2023, 206, 123942, 1-11. https://doi.org/10.1016/j.ijheatmasstransfer.2023.123942.
  13. [13]Zhu, L.; Fiorino, A.; Thompson, D.; Mittapally, R.; Meyhofer, E.; Reddy, P. Near-Field Photonic Cooling through Control of the Chemical Potential of Photons. Nature 2019, 566 (7743), 239–244. https://doi.org/10.1038/s41586-019-0918-8.
  14. [14]Park, K.; Zhang, Z. FUNDAMENTALS AND APPLICATIONS OF NEAR-FIELD RADIATIVE ENERGY TRANSFER. Frontiers in Heat and Mass Transfer 2013, 4 (1), 1-26. https://doi.org/10.5098/hmt.v4.1.3001.
  15. [15]Howell, S. T.; Grushina, A.; Holzner, F.; Brugger, J. Thermal Scanning Probe Lithography—a Review. Microsyst Nanoeng 2020, 6 (1), 1-24. https://doi.org/10.1038/s41378-019-0124-8.
  16. [16]Pascale, M.; Giteau, M.; Papadakis, G. T. Perspective on Near-Field Radiative Heat Transfer. Appl Phys Lett 2023, 122 (10), 100501, 1-11. https://doi.org/10.1063/5.0142651.
  17. [17]Biehs, S.-A.; Tschikin, M.; Ben-Abdallah, P. Hyperbolic Metamaterials as an Analog of a Blackbody in the Near Field. Phys Rev Lett 2012, 109 (10), 104301, 1-5. https://doi.org/10.1103/PhysRevLett.109.104301.
  18. [18]Tsurimaki, Y.; Benzaouia, M.; Fan, S. Nanophotonic Heat Exchanger for Enhanced Near-Field Radiative Heat Transfer. Nano Lett 2024, 24 (15), 4521–4527. https://doi.org/10.1021/acs.nanolett.4c00506.
  19. [19]Gjerding, M. N.; Petersen, R.; Pedersen, T. G.; Mortensen, N. A.; Thygesen, K. S. Layered van Der Waals Crystals with Hyperbolic Light Dispersion. Nat Commun 2017, 8 (1), 320, 1-8. https://doi.org/10.1038/S41467-017-00412-Y.
  20. [20]Lim, M.; Lee, S. S.; Lee, B. J. Near-Field Thermal Radiation between Doped Silicon Plates at Nanoscale Gaps. Phys Rev B 2015, 91 (19), 195136, 1-7. https://doi.org/10.1103/PhysRevB.91.195136.
  21. [21]Liu, X. L.; Zhang, R. Z.; Zhang, Z. M. Near-Field Radiative Heat Transfer with Doped-Silicon Nanostructured Metamaterials. Int J Heat Mass Transf 2014, 73, 389–398. https://doi.org/10.1016/J.IJHEATMASSTRANSFER.2014.02.021.
  22. [22]Zhang, L.; Miller, O. D. Optimal Materials for Maximum Large-Area Near-Field Radiative Heat Transfer. ACS Photonics 2020, 7 (11), 3116–3129. https://doi.org/10.1021/acsphotonics.0c01176.
  23. [23]Raman, A.; Shin, W.; Fan, S. Upper Bound on the Modal Material Loss Rate in Plasmonic and Metamaterial Systems. Phys Rev Lett 2013, 110 (18), 183901, 1-5. https://doi.org/10.1103/PhysRevLett.110.183901.
  24. [24]Song, B.; Thompson, D.; Fiorino, A.; Ganjeh, Y.; Reddy, P.; Meyhofer, E. Radiative Heat Conductances between Dielectric and Metallic Parallel Plates with Nanoscale Gaps. Nat Nanotechnol 2016, 11 (6), 509–514. https://doi.org/10.1038/nnano.2016.17.
  25. [25]Chochol, J.; Postava, K.; Čada, M.; Vanwolleghem, M.; Mičica, M.; Halagačka, L.; Lampin, J.-F.; Pištora, J. Plasmonic Behavior of III-V Semiconductors in Far-Infrared and Terahertz Range. Journal of the European Optical Society-Rapid Publications 2017, 13 (1), 13, 1-8. https://doi.org/10.1186/s41476-017-0044-x.
  26. [26]Rakić, A. D.; Djurišić, A. B.; Elazar, J. M.; Majewski, M. L. Optical Properties of Metallic Films for Vertical-Cavity Optoelectronic Devices. Appl Opt 1998, 37 (22), 5271-5283. https://doi.org/10.1364/AO.37.005271.
  27. [27]Mittapally, R.; Lim, J. W.; Zhang, L.; Miller, O. D.; Reddy, P.; Meyhofer, E. Probing the Limits to Near-Field Heat Transfer Enhancements in Phonon-Polaritonics Materials. Nano Lett 2023, 23 (6), 2187–2194. https://doi.org/10.1021/acs.nanolett.2c04735.
  28. [28]Ma, L.; Le, D.-N.; Ben-Abdallah, P.; Woods, L. M. Bulk Layered Materials and Their Monolayer Counterparts for Radiative Heat Transfer. ACS Applied Optical Materials 2025, 3, 1, 31–41. https://doi.org/10.1021/acsaom.4c00384.
  29. [29]Li, Y.; Chernikov, A.; Zhang, X.; Rigosi, A.; Hill, H. M.; van der Zande, A. M.; Chenet, D. A.; Shih, E.-M.; Hone, J.; Heinz, T. F. Measurement of the Optical Dielectric Function of Monolayer Transition-Metal Dichalcogenides: MoS₂, MoSe₂, WS₂, and WSe₂ Phys Rev B 2014, 90 (20), 205422, 1-6. https://doi.org/10.1103/PhysRevB.90.205422.
  30. [30]Rodriguez-López, P.; Tse, W.-K.; Dalvit, D. A. R. Radiative Heat Transfer in 2D Dirac Materials. Journal of Physics: Condensed Matter 2015, 27 (21), 214019, 1-7. https://doi.org/10.1088/0953-8984/27/21/214019.
  31. [31]Gusso, A.; Sánchez-Ochoa, F.; Esquivel-Sirvent, R. Near-Field Radiative Heat Transfer between Layered β-GeSe Slabs: First-Principles Approach. Langmuir 2024, 40 (20), 10685–10694. https://doi.org/10.1021/acs.langmuir.4c00654.
  32. [32]Iizuka, H.; Fan, S. Significant Enhancement of Near-Field Electromagnetic Heat Transfer in a Multilayer Structure through Multiple Surface-States Coupling. Phys Rev Lett 2018, 120 (6), 063901, 1-6. https://doi.org/10.1103/PhysRevLett.120.063901.
  33. [33]Gupta, S.; Shirodkar, S. N.; Kutana, A.; Yakobson, B. I. In Pursuit of 2D Materials for Maximum Optical Response. ACS Nano 2018, 12 (11), 10880–10889. https://doi.org/10.1021/acsnano.8b03754.
  34. [34]Yu, P. Y.; Cardona, M. Fundamentals of Semiconductors: Physics and Materials Properties, 4th Edition.
  35. [35]Dresselhaus, M. S. SOLID STATE PHYSICS PART II Optical Properties of Solids.
  36. [36]Dong, Y.; Zhu, R.; Jia, Y. Linear Relationship between the Dielectric Constant and Band Gap in Low-Dimensional Mixed-Halide Perovskites. The Journal of Physical Chemistry C 2021, 125 (27), 14883–14890. https://doi.org/10.1021/acs.jpcc.1c01576.
  37. [37]Bethe, H. A.; Salpeter, E. E. QUANTUM MECHANICS OF ONE-AND TWO-ELECTRON ATOMS. https://doi.org/10.1007/978-3-662-12869-5.
  38. [38]Fu, J.; Kuisma, M.; Larsen, A. H.; Shinohara, K.; Togo, A.; Thygesen, K. S. Symmetry Classification of 2D Materials: Layer Groups versus Space Groups. 2d Mater 2024, 11 (3), 035009, 1-13. https://doi.org/10.1088/2053-1583/ad3e0c.
  39. [39]Mortensen, J. J.; Larsen, A. H.; Kuisma, M.; Ivanov, A. V.; Taghizadeh, A.; Peterson, A.; Haldar, A.; Dohn, A. O.; Schäfer, C.; Jónsson, E. Ö.; Hermes, E. D.; Nilsson, F. A.; Kastlunger, G.; Levi, G.; Jónsson, H.; Häkkinen, H.; Fojt, J., et al. GPAW: An Open Python Package for Electronic Structure Calculations. J Chem Phys 2024, 160 (9), 092503, 1-41. https://doi.org/10.1063/5.0182685.
  40. [40]Adler, S. L. Quantum Theory of the Dielectric Constant in Real Solids. Physical Review 1962, 126 (2), 413–420. https://doi.org/10.1103/PhysRev.126.413.
  41. [41]Wiser, N. Dielectric Constant with Local Field Effects Included. Physical Review 1963, 129 (1), 62–69. https://doi.org/10.1103/PhysRev.129.62.
  42. [42]Joulain, K.; Mulet, J. P.; Marquier, F.; Carminati, R.; Greffet, J. J. Surface Electromagnetic Waves Thermally Excited: Radiative Heat Transfer, Coherence Properties and Casimir Forces Revisited in the near Field. Surf Sci Rep 2005, 57 (3–4), 59–112. https://doi.org/10.1016/J.SURFREP.2004.12.002.
  43. [43]Polder, D.; Van Hove, M. Theory of Radiative Heat Transfer between Closely Spaced Bodies. Phys Rev B 1971, 4 (10), 3303–3314. https://doi.org/10.1103/PhysRevB.4.3303.
  44. [44]Volokitin, A. I.; Persson, B. N. J. Electromagnetic Fluctuations at the Nanoscale. 2017. https://doi.org/10.1007/978-3-662-53474-8.
  45. [45]Krüger, M.; Bimonte, G.; Emig, T.; Kardar, M. Trace Formulas for Nonequilibrium Casimir Interactions, Heat Radiation, and Heat Transfer for Arbitrary Objects. Phys Rev B 2012, 86 (11), 115423, 1-26. https://doi.org/10.1103/PhysRevB.86.115423.
  46. [46]Eisaman, M. D.; Fan, J.; Migdall, A.; Polyakov, S. V. Invited Review Article: Single-Photon Sources and Detectors. Review of Scientific Instruments 2011, 82 (7), 071101, 1-25. https://doi.org/10.1063/1.3610677.

Paper details

vlnc:W_473tehh2
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents