betaFeedback

WorksPhysics and Astronomy

Structural diversity of molecular nitrogen on approach to polymeric states

Abstract

Nitrogen represents an archetypal example of material exhibiting a pressure driven transformation from molecular to polymeric state. Detailed investigations of such transformations are challenging because of a large kinetic barrier between molecular and polymeric structures, making the transformation largely dependent on kinetic stimuli. In the case of nitrogen, additional complications occur due to the rich polymorphism in the vicinity of the transition. Here, we report the observation of both molecular (θ) and polymeric (BP) phases, crystallized upon temperature quenching of fluid nitrogen to room temperature at 97-114 GPa. Synchrotron single-crystal X-ray diffraction, Raman spectroscopy, and first-principles theoretical calculations have been used for diagnostics of the phases and determination of their structure and stability. Molecular θ-nitrogen is the most stable among molecular phases bordering the stability field of polymeric phases, partially settling a previously noted discrepancy between theory and experiment concerning the thermodynamic stability limit of molecular phases.

Pressure-induced polymerization is a universal phenomenon in simple molecular systems. It occurs due to the destabilization of strong intramolecular bonds, where at high compressions a large electron density becomes energetically less favorable than that of the network lower order bonding. Well-known examples are N2\mathrm{N}_2 [1, 2], CO2\mathrm{CO}_2 [3], H2O\mathrm{H}_2\mathrm{O} [4], I2\mathrm{I}_2 [5], etc. The case of nitrogen is of fundamental interest because of the simplicity of the system, and a very high bonding energy of the intramolecular triple bond, which makes polymeric all-nitrogen compounds extremely energetic (see Ref. [6] and Refs. therein). Thus, knowledge of the structure and understanding of the stability limits of the phases bordering the molecular-polymeric transition is critical. This information remains at least partially controversial because of a large potential barrier between molecular and polymeric phases, which results in large kinetic effects such as large hysteresis limits depending on temperature and direction of the transformation. Thus, challenging experiments need to be performed in a wide pressure-temperature (PP-TT) range (50 to 150 GPa and 10 to 7000 K). In addition, molecular and polymeric phases are characterized by extremely rich polymorphism, which includes the realization of many metastable phases (see Ref. [7] and Refs. therein).

Density functional theory calculations predict the transformation from molecular to nitrogen allotropes above 50 GPa [1, 8, 9, 10, 11, 12]. However, experiments show that the transformation to a polymeric amorphous phase η\eta only occurs at much higher pressure (>120 GPa) at temperatures <2000 K [13, 14, 15]. Higher temperatures are needed to crystallize polymeric nitrogen in cubic gauche (cg) and black phosphorus (bp) structures, but the synthesis can be performed at lower pressures [2, 12, 16, 17]. Furthermore, fluid molecular nitrogen solidifies into cg-N at 116 GPa and 2080 K and at 120 GPa and 2440 K [18] upon isothermal compression. No polymeric liquid is reported below 2440 K, and no solid polymeric phase forms below 116 GPa, e.g., by crystallization of fluid molecular nitrogen across its melting line. Polymeric nitrogen likely forms at higher temperatures above 125 GPa, evidenced by an appearance of a Drude like reflectance edge [19].

The discrepancy in polymerization pressure between experiment and theory has previously been addressed in a number of ways. Proper inclusion of van-der-Waals interactions allows to widen the thermodynamic domain of stability of molecular phases [20]. Also, the entropic effects tend to stabilize the molecular phases [11, 21], thus shifting the transformation pressure to higher values; however, high temperatures are needed to overcome the potential barriers. Another factor, which could lead to the large discrepancy in the transformation pressure, is the possible existence of another more stable molecular phase near the border with the stability domain of polymeric phases [8]. Reliable structural data have been reported for ε\varepsilon-nitrogen—high-pressure phase which is stable in a wide P-T range from 17 GPa at 300 K to 115 GPa and 2000 K (Figure 1), where it is expected to be limited by the equilibrium transition line with the domain of stability of polymeric phases. ε\varepsilon-nitrogen transforms to the ζ\zeta-phase at 65 GPa at room temperature. ζ\zeta-nitrogen is inferred to have a slightly distorted structure of the rhombohedral ε\varepsilon-N2\mathrm{N}_{2} but its structure has not been determined definitively[22]. ζ\zeta-nitrogen transforms to ε\varepsilon-nitrogen at high temperature along the phase line with a positive slope (Figure 1). Another molecular high-pressure phase (κ\kappa), which was hypothesized to represent another lowering of the unit cell symmetry of ε\varepsilon-N2\mathrm{N}_{2}, is reported above 110 GPa [22]. It is interesting that heating ε\varepsilon, ζ\zeta, and κ\kappa phases above 56 GPa across or close to the melting line results in the formation of other molecular phases: ι\iota at 56–69 GPa [9, 23] and ζ′\zeta^{\prime} phase above 75 GPa [24, 25]. The latter ζ′\zeta^{\prime} phase is also a product of the pressure release transformation from the amorphous polymeric phase η\eta at high temperature [24]. It should be noted that according to theoretical calculations ε\varepsilon-N2\mathrm{N}_{2} is metastable. Instead, random structure searches revealed several other energetically more favorable molecular phases [8]; some of these predictions have been confirmed, for example for λ\lambda-nitrogen [26]. Yet another molecular phase, θ\theta-nitrogen, has been reported to occur above 90 GPa at high temperatures (700–925 K) [23]; which has very similar Raman spectra to λ\lambda-nitrogen [26]. Its formation is irregular and usually require P-T manipulations, e.g., isothermal compression at high T [25]. The structure of this phase has not been determined but is assumed to be orthorhombic based on preliminary powder XRD data [23].

Figure 1. Phase diagram of nitrogen at extreme thermobaric conditions. Solid black lines are the phase and melting lines of molecular phases from Refs. [26, 27]. The melting line from Ref. [18] is shown for comparison as a dashed black line. Short gray dashed line is a kinetic line along which a molecular high-pressure phase κ\kappa transforms to an amorphous phase η\eta [13, 15, 24]. Long dashed gray line is the proposed in Refs. [18, 27] phase line between molecular and polymeric solids. Dotted gray line is a hypothetical melting line of polymeric phases, where metallization occurs according to Ref. [19]. The onset to the conductive molecular dissociative state is shown by a solid gray line [19]. The solidification pathways of this work, which resulted in crystallization of molecular θ\theta-nitrogen and polymeric bp-nitrogen are shown by vertical red arrows.

Here we report the structural determination of θ\theta-nitrogen, which was synthesized by quenching of laser heated nitrogen above the melting line at 97 GPa. The structure of this phase is tetragonal P41212\mathrm{P}4_{1}2_{1}2 with four molecules in the unit cell. Theoretical structure search found this molecular phase to be the most stable above 9.5 GPa [8], which was confirmed by theoretical calculations of in this work. Density functional theory calculations with norm-conserving pseudopotentials show that this phase transforms to cg-N at 70 GPa, which is 5 GPa higher than the calculated transformation pressure from ε\varepsilon-nitrogen to cg-N. The experiments show the transformation of P41212\mathrm{P}4_{1}2_{1}2 N2_2 to bp-N at 117 GPa compared to the theoretically predicted 81 GPa. This difference is likely due to an increased stability of molecular nitrogen at high temperatures, which are needed to overcome the kinetic barrier.

The experimental procedure included concomitant single crystal X-ray diffraction (SCXRD) and Raman spectroscopy measurements at 97–114 GPa at the Extreme Conditions Beamline (ECB) at Petra III (DESY, Hamburg) and the following up Raman mapping at our Carnegie Science facilities. A small flake of metallic Co was positioned in the DAC cavity to absorb heat from an infrared laser. The quenched samples were mapped at room temperature using synchrotron powder XRD to identify points of interest with good single-crystal character which were then examined by SCXRD.

For single-crystal XRD measurements at ECB, we used monochromatic X-ray radiation with λ=0.2908\lambda= 0.2908 Å focused down to 2×22 \times2 μm2\mu\mathrm{m}^{2} by a Kirkpatrick–Baez mirror system and diffraction patterns were collected on a Perkin Elmer XRD1621 flat panel detector. For the single-crystal XRD measurements, samples were rotated around a vertical ω\omega-axis in a range of ±30∘\pm30^\circ with an angular step Δω=0.5∘\Delta\omega= 0.5^\circ and an exposure time of 1-2 s/frame. For analysis of the single-crystal diffraction data we used the CrysAlisPro software package [28], which facilitates the SCXRD analysis of multigrain samples. To calibrate an instrumental model in the CrysAlisPro software, i.e., the sample-to-detector distance, detector’s origin, offsets of goniometer angles, and rotation of both X-ray beam and the detector around the instrument axis, we used a single crystal of orthoenstatite ((Mg1.93_{1.93}Fe0.06_{0.06})(Si1.93_{1.93}, Al0.06_{0.06})O6_6, Pbca space group, a=8.8117(2)a = 8.8117(2), b=5.1832(1)b = 5.1832(1), and c=18.2391(3)c = 18.2391(3) Å). The structure was solved with the ShelXT structure solution program and refined with the Olex2 program[29, 30]. The Cambridge Structural Database [31] contains the supplementary crystallographic data for this work (CSD-2299301). These data can be obtained free of charge from FIZ Karlsruhe [32].

First-principles calculations were performed within the framework of density functional theory (DFT), implemented in Vienna Ab initio Simulation Package (VASP) code [33]. We implemented Perdew-Burke-Ernzerhof (PBE) [34] functional for the exchange-correlation interactions of electrons. Plane-wave basis with a cut-off energy of 500 eV and sample K-point of 2π∗0.0252\pi* 0.025 Å−1^{-1}, were used to calculate total energy. We relaxed the crystal structure until all the stress forces of atoms were smaller than 0.01 eV/Å. We used the forces from the VASP code to calculate the phonons. First-principles theoretical calculations have been performed in P41212P4_{1}2_{1}2 (θ), R3ˉcR\bar{3}c (ε), CmceCmce (bp), and I213I2_{1}3 (cg) phases at selected pressures (60 and 112 GPa), where these structures were optimized using norm-conserving pseudopotentials and GGA-PBE functional. Monkhorst-Pack grid size for k-points sampling of the Brillouin Zone (BZ) is 5x6x5 for all structures [35]. The phonon dispersion and phonon frequency calculations were performed using a finite displacement method implemented in the CASTEP code [36]. The Raman spectra were calculated using the formalism presented in Ref. [37]. The electronic bandgap calculations have been performed within GGA/PBE approximations.

Laser heating to 2700 K at 97 GPa results in formation of another phase other than the initial ζ\zeta phase (Figure 2), which we identified as θ\theta-nitrogen [23] based on XRD and Raman measurements as described below. Visual observations show the presence of a strip at the edge of Co heat absorber after heating, suggesting the presence of material with a different refractive index (Figure S3, Supplements [38]). Single-crystal XRD pattern (Figure 2(a), and Table SI, Supplements [38]) can be indexed in the P41212P4_{1}2_{1}2 space group (# 92, a=2.6943(5)a = 2.6943(5), c=7.52(3)c = 7.52(3)), and the structure can be solved and refined as molecular nitrogen with four N2N_{2} molecules in the unit cell with an N-N intramolecular distance of 1.09(1) Å. A single crystallographically-independent nitrogen atom occupies a general position 8b (0.2907(9), 0.5578(10), 0.4740(14)).

Figure 2. (a) Reconstructed reciprocal lattice planes of θ\theta-nitrogen at 97 GPa. Observed diffraction spots from sample have been indexed and used to determine the structure of P412124_{1}2_{1}2 N2_2 (see details in Table S1, Supplements[38]). The X-ray extinctions rule for this phase is depicted; (b) Crystal structure of θ\theta-N2_2. Thick lines represent intramolecular N-N and thin lines represent intermolecular bonds.

Images of the high-pressure cavity at 97 GPa after laser heating

Figure S3. Images of the high-pressure cavity at 97 GPa after laser heating: (a) Raman mapping of bp-N and ζ\zeta-N2_2; (b) Raman mapping of θ\theta-N2_2; (c) optical image; (d) X-ray mapping. The cavity is of approximately 50 μm50\ \mu\mathrm{m} in diameter and contains a piece of metallic Co metal (partially reacted to form a variety of nitrides) in the middle surrounded by nitrogen.

The structure can be viewed as layered, where the layers are formed by canted molecules connected by stronger intermolecular forces compared to the interlayer ones (Figure 2(b) and Figure S1, Supplements [38]). The unit cell consists of four layers stacked in a sequence ABCD; the structure can be described as a distorted fccfcc lattice [8]. It is remarkable that another molecular phase, λ\lambda-N2N_{2} [8, 26], which has a monoclinic P21/cP2_{1}/c structure, has similar structural motif consisting of essentially the same layers as in θ\theta-N2N_{2} (Figure S1, Supplements [38]). However, the layer stacking sequence in λ\lambda-N2N_{2} differs in that it only has two layers (AB) in the unit cell. The volumes occupied by the molecule would be expected to be similar for these two molecular structures, which can be considered as polytypes. This is indeed the case as the experimental volume vs pressure curves for these phases can be described by the same equation of state (Figure S2, Supplements [38]). The structural similarities between these polytypes give rise to similar Raman spectra of the two modifications.

Crystal structures of nitrogen phases of interest to this work, showing $\theta$-N$_2$, $\lambda$-N$_2$, and BP-N

Figure S1. Crystal structures of nitrogen phases of interest to this work. Thick lines represent intramolecular N-N bonds and thin lines – intermolecular contacts. θ\theta-N2_2 and λ\lambda-N2_2 are molecular phases, which consist of similar molecular layer but differ in their stacking. θ\theta-N2_2 consists of four layers forming an orthorhombic lattice. λ\lambda-N2_2 consists of two layers stacked such that they form an orthorhombic lattice. BP-N is also layered, but all intralayer nearest neighbor bonds are covalent low order ones.

Volume-pressure data for different phases of nitrogen at 300 K; graph showing volume versus pressure and data for θ-N₂, λ-N₂, bp-N, ι-N₂, ε-N₂, ζ-N₂, and κ-N₂

Figure S2. Figure S2. Volume-pressure data for different phases of nitrogen at 300 K. Filled symbols are the results of this work, open symbols are the results of previous experiments [9, 12, 22, 26, 39]. Solid line is a provisional isotherm in the form of the Vinet Equation of State (EOS) with P0=30.0P_0=30.0 GPa, V0=11.0V_0=11.0 Å3^3, K0=37(6)K_0=37(6) GPa and K0′=6.0(7)K'_0=6.0(7) drawn through the data for θ\theta-N2_2 of this work and λ\lambda-N2_2 [26], which are expected to be alike due to the structural proximity (Figure S1). At 114 GPa, our experiments show co-existence of three phases: molecular θ\theta-N2_2 and ζ\zeta-N2_2 as well as polymeric bp-N.

The Raman spectra of the new phase corresponds well to that of θ\theta-nitrogen [23, 25], characterized by low-frequency translational and rotational modes and high-frequency intramolecular modes (Figure 3). Group-theoretical analysis (Table S2, Supplements[38]) predicts rich Raman spectra, which consist of 3 high-frequency intramolecular modes (N-N stretching vibrations), 6 translational, and 5 librational Raman modes (E-modes are doubly degenerate). Our Raman experiments demonstrate good agreement with this prediction (Figure 3). The theoretically calculated Raman spectrum also shows good qualitative agreement in the number of modes and composition of the measured spectrum (Figure 3). As expected, the Raman spectrum of θ\theta-nitrogen is very similar to λ\lambda-nitrogen [26]; the difference is due to the larger unit cell of θ\theta-nitrogen, which results in a larger number of modes to be Raman active (Table S2, Supplements[38]). These include 1 intramolecular mode, 6 low-frequency translational modes, and 3 librational modes. Our experiments indeed show that there is a correspondence between the strongest Raman bands in both phases, while θ\theta-N2_2 reveals one extra N2_2 vibron mode and 6 extra translational and librational modes in the low-frequency range (Figure S4, Supplements[38]). This is in good agreement with the predictions since some of the additional modes may be weak or interfere with stronger modes. The strongest Raman peaks of θ\theta-N2\mathrm{N}_2 and the Raman peaks of λ\lambda-N2\mathrm{N}_2 demonstrate almost identical pressure dependencies of the frequencies (Figure S4, Supplements[38]).

Raman spectra of $\theta$-$\mathrm{N}_2$ and bp-N at 114 GPa

Figure 3. Raman spectra of θ\theta-N2\mathrm{N}_2 and bp-N at 114 GPa. The top trace, which nominally corresponds to bp-N, contains peaks of θ\theta-N2\mathrm{N}_2 due to the proximity of this phase in the sample cavity. The theoretically calculated Raman spectrum at 112 GPa is depicted by blue solid vertical bars. The inset shows an expanded view of the experimental low-frequency Raman spectrum. The Raman peaks are assigned according to group-theory (Table S2, Supplements[38]) and theoretical calculations.

Raman frequencies versus pressure for θ-N₂ and λ-N₂

Figure S4. Raman frequencies vs pressure of θ\theta-N2_2 and λ\lambda-N2_2. Red filled circles are the data of this work at 300 K; open symbols are the data of the previous works [23, 26]. Lines are guides to the eye.

Space & point groupθ\theta-N2_2 P41212P4_{1}2_{1}2 #92 (D44D_{4}^{4})λ\lambda-N2_2 P21/cP2_{1}/c #14 (C2h5C_{2h}^{5})
Site symmetry8b (C1C_{1})4e (C1C_{1})
Acoustic modesA2+EA_{2}+EAu+2BuA_{u}+2B_{u}
Optical modesModesActivityModesActivity
3A1+3B1+3B2+5E3A_{1}+3B_{1}+3B_{2}+5E 2A2+5E2A_{2}+5ERaman IR3Ag+3Bg3A_{g}+3B_{g} 3Au+3Bu3A_{u}+3B_{u}Raman IR
IntramolecularA1+B1+EA_{1}+B_{1}+ERaman+IRAg+BgA_{g}+B_{g}Raman
TranslationalA1+B1+B2+3EA_{1}+B_{1}+B_{2}+3ERaman+IRnone
LibrationalA1+B1+2A2+2B2+EA_{1}+B_{1}+2A_{2}+2B_{2}+ERaman+IR2Ag+2Bg2A_{g}+2B_{g}Raman

Table S2. Vibrational modes and their Raman and IR activity in P41212P4_{1}2_{1}2 (D44D_{4}^{4}) and P21/cP2_{1}/c (C2h5C_{2h}^{5}) crystal structures

The sample was reheated at each of the three successive higher-pressure points. At the highest pressure of this run (114 GPa), polymeric bp-N [12, 17] was detected in powder XRD patterns (as single-crystal like reflections) (Figure S5 of Supplements[38]) and in Raman spectra (Figure 3) at one of the positions, which had been occupied by θ\theta-nitrogen before heating. The lattice parameters, the number of Raman peak and their spectral positions of bp-N (Figure 3, Figure S2, Figure S4, Supplements[38]) agree well with the previous observations [12, 17].

XRD pattern and 2D diffractogram of bp-N

Figure S5. XRD pattern of bp-N crystallized after laser heating of θ\theta-N2_2 at 114 GPa. Crosses in the main panel are the experimental data (background subtracted), solid green line is a Le Bail fitting. Vertical ticks correspond the fitted positions of bp-N (a=2.156(3)a=2.156(3) \AA, b=6.619(2)b=6.619(2) \AA, c=2.905(6)c=2.905(6) \AA, V=41.465(5)V=41.465(5) \AA3^3) and expected positions of other phases. The bottom curve is the difference curve between the experimental data and the fit. The top panel is the 2D diffractogram in rectangular coordinates (cake), which demonstrates SC nature of the Bragg peaks of bp-N. Red hatched area designates the position of the strongest peaks of θ\theta-N2_2. These peaks were not fitted because of the overall low-intensity of XRD peaks of θ\theta-N2_2.

Our theoretical calculations demonstrate that the experimentally determined structure of θ\theta-N2\mathrm{N}_2 relaxes to the phase with the same symmetry and essentially identical fractional atomic coordinates. This phase is mechanically and dynamically stable at 112 GPa (Figure S6, Table S3, Supplements[38]); it is semiconducting with a band gap of 2.23 eV (Figure S7, Supplements[38]). We computed the enthalpy of θ\theta-N2_2, ε\varepsilon-N2_2, bp-N, and cg-N at 60 and 112 GPa (Figure 4). In this pressure range θ\theta-N2_2 is more stable compared to ε\varepsilon-N2_2, so the equilibrium transition to the most stable polymeric cg-N phase shift up to 70 GPa vs 65 GPa. Our calculations show that another polymeric phase bp-N is slightly less stable than cg-N; thus the θ\theta-N2_2 to bp-N transition is expected to occur at even higher pressures, at 80.7 GPa. These calculations correspond to 0 K, and the results should be corrected for the entropy terms, so the presented results should be considered as an approximate guide and must be temperature corrected to be quantitatively compared with experiments. This correction can be approximated by accounting for the change in the chemical potential of nitrogen at high pressure-temperature conditions [11]. Using the approximation of “the Moderate Extrapolation” of Ref. [11] and assuming that the synthesis of θ\theta-N2_2 occurred near the melting line near 1750 K, this approximation results in the shift of the transition pressure to cg-N to 104 GPa, (112 GPa to bp-N) which is close to the experimental conditions.

Enthalpy Difference from cg-N (eV/atom) versus Pressure (GPa), with curves and legend for θ-N₂, ε-N₂, cg-N, and BP-N phases

Figure 4. Theoretically computed enthalpies of molecular and polymeric nitrogen phases vs pressure determined here from the first principles plotted with respect to results for cg-N. Solid lines are the results computed here while dashed lines are the results of previous computation [8, 9, 20]. The results of this work show the transitions to polymeric phases at higher pressures because of using norm-conserving pseudopotentials.

Theoretically calculated phonon dispersion curves of $\theta$-N$_2$ at 112 GPa

Figure S6. Theoretically calculated phonon dispersion curves of θ\theta-N2_2 at 112 GPa.

Theoretically calculated electronic band structure of θ-N₂ at 112 GPa

Figure S7. Theoretically calculated electronic band structure of θ-N₂ at 112 GPa.

1059(5)1059(5)666.2(1.3)666.2(1.3)605.8(1.7)605.8(1.7)0.000000.000000.000000.000000.000000.00000
666.2(1.3)666.2(1.3)871(5)871(5)571.6(1.4)571.6(1.4)0.000000.000000.000000.000000.000000.00000
605.8(1.7)605.8(1.7)571.6(1.4)571.6(1.4)926(4)926(4)0.000000.000000.000000.000000.000000.00000
0.000000.000000.000000.000000.000000.00000168.3(7)168.3(7)0.000000.000000.000000.00000
0.000000.000000.000000.000000.000000.000000.000000.00000296.8(1.1)296.8(1.1)0.000000.00000
0.000000.000000.000000.000000.000000.000000.000000.000000.000000.00000294.7(1.4)294.7(1.4)

Table S3. Theoretically calculated Elastic Stiffness Constants CijC_{ij} (GPa) of θ\theta-N2\mathrm{N}_2 at 112 GPa1)

The results of our enthalpy vs P calculations (Figure 4) qualitatively agree with the previous calculations [8, 9], which found that P414_121_12 N2_2 is among the most stable molecular phases above 10 GPa. These calculations also show that λ\lambda-N2_2 is almost equally stable as θ\theta-N2_2, while ε\varepsilon-N2_2 is distinctly less stable. This result seems to disagree with numerous experiments, which show that ε\varepsilon-N2_2 and related higher-pressure phases (ζ\zeta and κ\kappa) are stable or metastable at room temperature upon compression at room temperature to the limit of stability of the molecular phases. However, given the wide region of P-T space where both λ\lambda-N2_2 and θ\theta-N2_2 polytypes can be observed especially at low T [23, 26], the stability of ε\varepsilon-N2_2 and derived phases must be driven by the entropy and pressure-volume (PV) terms the Gibbs free energy (Figure S2, Supplements[38]) below 50 GPa, while at high P, these phases are likely metastable, confirmed by their amorphization on the pressure increase at low temperatures and crystallization to ι\iota-N2_2 and θ\theta-N2_2 upon quasi-isobaric heating or crystallization from the melt.

Our experiments show the previously unobserved transformation of θ\theta-N2_2 to bp-N at 114 GPa. Even though we cannot completely rule out recrystallization from the melt, this observation sets an important transformation pressure-temperature condition for the molecular to polymeric phase transition near 114 GPa and 1750 K in fair agreement with previous observations [18] and conjectures [27]. It is interesting that θ\theta-N2_2 transforms to bp-N polymeric phase instead of believed to be thermodynamically stable cg-N. We propose that this is because of the kinetic reason as the structures of θ\theta-N2_2 and bp-N phases bear similarities, both consisting of puckered layers (Figure S1, Supplements[38]).

Overall, our combined experimental and theoretical investigations demonstrate the previously missed transformation pathway between molecular and polymeric states of nitrogen. The P-T conditions of the transformation settles an equilibrium transition line above 110 GPa, well above theoretically calculated at 0 GPa (55-70 GPa). The difference can be understood in terms of the previously proposed change in the chemical potential of nitrogen at high P-T conditions.

A.F.G., H.C., and M.F.M acknowledge the support of the National Science Foundation (NSF) Grant No. DMR-2200670. M.B. acknowledges the support of Deutsche Forschungsgemeinschaft (DFG Emmy-Noether Program project BY112/2-1). E.B. acknowledges the support of Deutsche Forschungsgemeinschaft (DFG Emmy-Noether project No. BY 101/2-1). We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Parts of this research were carried out at PETRA III (beamline P02.2). Beamtime was allocated for proposals I-20221160 and I-20230233.

Supplemental Information

This pdf file contains Supplemental Figure S1-S7 and Table S1-S3.

Pressure (GPa)97105112114
Chemical formulaN
MrM_{\mathrm{r}}14.01
Crystal system, space groupTetragonal, P41212\mathrm{P}4_{1}2_{1}2
Temperature (K)293
aa, cc (Å)2.6943 (5), 7.52(3)2.6832(12), 7.48(9)2.6582(7), 7.44(1)2.6481(9), 7.41(3)
VV (Å3^3)54.6(3)53.9(6)52.59(9)52.0(2)
ZZ8
Radiation typeSynchrotron, λ=0.29050\lambda= 0.29050 Å
μ\mu (mm−1^{-1})0.080.080.080.08
DiffractometerLH @ P02.2 (Petra III, DESY)
Tmin⁡T_{\min}, Tmax⁡T_{\max}0.643, 1.0000.504, 1.0000.71764, 1.0000.54297, 1.000
No. of measured, independent and observed reflections207, 61, 47 [I≥2σ(I)I \ge2\sigma(I)]219, 62, 58 [I≥2σ(I)I \ge2\sigma(I)]224, 98, 90 [I>2σ(I)I > 2\sigma(I)]246, 81, 64 [I>2σ(I)I > 2\sigma(I)]
RintR_{\mathrm{int}}0.0420.0250.0290.047
(sin⁡θ/λ)max⁡(\sin\theta/\lambda)_{\max} (Å−1^{-1})0.9490.9690.9991.070
Refinement
R[F2>2σ(F2)]R[F^2 > 2\sigma(F^2)], wR(F2)wR(F^2), SS0.042, 0.111, 1.250.065, 0.143, 1.100.050, 0.126, 1.160.040, 0.077, 1.15
No. of reflections61629881
No. of parameters10101010
Δρmax⁡\Delta\rho_{\max}, Δρmin⁡\Delta\rho_{\min} (e Å−3^{-3})0.16, −0.160.49, −0.250.54, −0.300.32, −0.18

Table S1. Details of crystal structure refinements for θ\theta-N2_2 at high pressures

Corresponding author:

[email protected]

Computer programs: CrysAlis PRO 1.171.41.123a (Rigaku OD, 2022) [28], SHELXT 2018/2 [29], olex2.refine 1.5-ac5-024 [40], SHELXL2018/3 [29], Olex2 1.5-ac5-024 [30].

References

  1. [1]C. Mailhiot, L. H. Yang and A. K. McMahan, Physical Review B 46 (22), 14419-14435 (1992).
  2. [2]M. I. Eremets, A. G. Gavriliuk, I. A. Trojan, D. A. Dzivenko and R. Boehler, Nature Materials 3 (8), 558-563 (2004).
  3. [3]C. S. Yoo, H. Cynn, F. Gygi, G. Galli, V. Iota, M. Nicol, S. Carlson, D. Häusermann and C. Mailhiot, Physical Review Letters 83 (26), 5527-5530 (1999).
  4. [4]W. B. Holzapfel, Journal of Chemical Physics 56 (2), 712-715 (1972).
  5. [5]K. Takemura, S. Minomura, O. Shimomura and Y. Fujii, Physical Review Letters 45 (23), 1881-1884 (1980).
  6. [6]Y. Wang, M. Bykov, I. Chepkasov, A. Samtsevich, E. Bykova, X. Zhang, S.-q. Jiang, E. Greenberg, S. Chariton, V. B. Prakapenka, A. R. Oganov and A. F. Goncharov, Nature Chemistry 14 (7), 794-800 (2022).
  7. [7]A. F. Goncharov, in Molecular compounds under extreme conditions in: Dave Mao legacy, edited by Y. Fei (2022).
  8. [8]C. J. Pickard and R. J. Needs, Physical Review Letters 102 (12), 125702 (2009).
  9. [9]R. Turnbull, M. Hanfland, J. Binns, M. Martinez-Canales, M. Frost, M. Marqués, R. T. Howie and E. Gregoryanz, Nature Communications 9 (1), 4717 (2018).
  10. [10]J. Kotakoski and K. Albe, Physical Review B 77 (14), 144109 (2008).
  11. [11]H. Alkhaldi and P. Kroll, The Journal of Physical Chemistry C 123 (12), 7054-7060 (2019).
  12. [12]C. Ji, A. A. Adeleke, L. Yang, B. Wan, H. Gou, Y. Yao, B. Li, Y. Meng, J. S. Smith, V. B. Prakapenka, W. Liu, G. Shen, W. L. Mao and H.-k. Mao, Science Advances 6 (23), eaba9206 (2020).
  13. [13]A. F. Goncharov, E. Gregoryanz, H.-k. Mao, Z. Liu and R. J. Hemley, Physical Review Letters 85 (6), 1262-1265 (2000).
  14. [14]M. I. Eremets, R. J. Hemley, H.-k. Mao and E. Gregoryanz, Nature 411 (6834), 170-174 (2001).
  15. [15]M. J. Lipp, J. P. Klepeis, B. J. Baer, H. Cynn, W. J. Evans, V. Iota and C. S. Yoo, Physical Review B 76 (1), 014113 (2007).
  16. [16]D. Tomasino, M. Kim, J. Smith and C.-S. Yoo, Physical Review Letters 113 (20), 205502 (2014).
  17. [17]D. Laniel, B. Winkler, T. Fedotenko, A. Pakhomova, S. Chariton, V. Milman, V. Prakapenka, L. Dubrovinsky and N. Dubrovinskaia, Physical Review Letters 124 (21), 216001 (2020).
  18. [18]G. Weck, F. Datchi, G. Garbarino, S. Ninet, J.-A. Queyroux, T. Plisson, M. Mezouar and P. Loubeyre, Physical Review Letters 119 (23), 235701 (2017).
  19. [19]S. Jiang, N. Holtgrewe, S. S. Lobanov, F. Su, M. F. Mahmood, R. S. McWilliams and A. F. Goncharov, Nature Communications 9, 2624 (2018).
  20. [20]A. Erba, L. Maschio, C. Pisani and S. Casassa, Physical Review B 84 (1), 012101 (2011).
  21. [21]D. Melicherová and R. Martoňák, The Journal of Chemical Physics 158 (24) (2023).
  22. [22]E. Gregoryanz, A. F. Goncharov, C. Sanloup, M. Somayazulu, H.-k. Mao and R. J. Hemley, The Journal of Chemical Physics 126 (18), 184505 (2007).
  23. [23]E. Gregoryanz, A. F. Goncharov, R. J. Hemley, H.-k. Mao, M. Somayazulu and G. Shen, Physical Review B 66 (22), 224108 (2002).
  24. [24]E. Gregoryanz, A. F. Goncharov, R. J. Hemley and H.-k. Mao, Physical Review B 64 (5), 052103 (2001).
  25. [25]D. Tomasino, Z. Jenei, W. Evans and C.-S. Yoo, The Journal of Chemical Physics 140 (24), 244510 (2014).
  26. [26]M. Frost, R. T. Howie, P. Dalladay-Simpson, A. F. Goncharov and E. Gregoryanz, Physical Review B 93 (2), 024113 (2016).
  27. [27]A. F. Goncharov, J. C. Crowhurst, V. V. Struzhkin and R. J. Hemley, Physical Review Letters 101 (9), 095502 (2008).
  28. [28]CrySalisPro Software System (Rigaku Oxford Diffraction) (Oxford, UK, 2014).
  29. [29]G. Sheldrick, Acta Crystallographica Section A 71 (1), 3-8 (2015).
  30. [30]O. V. Dolomanov, L. J. Bourhis, R. J. Gildea, J. A. K. Howard and H. Puschmann, Journal of Applied Crystallography 42 (2), 339-341 (2009).
  31. [31]C. R. Groom, I. J. Bruno, M. P. Lightfoot and S. C. Ward, Acta Crystallographica Section B 72 (2), 171-179 (2016).
  32. [32]www.ccdc.cam.ac.uk/structures.
  33. [33]G. Kresse and J. Furthmüller, Physical Review B 54 (16), 11169-11186 (1996).
  34. [34]J. P. Perdew, K. Burke and M. Ernzerhof, Physical Review Letters 77 (18), 3865-3868 (1996).
  35. [35]H. J. Monkhorst and J. D. Pack, Physical Review B 13 (12), 5188-5192 (1976).
  36. [36]K. Refson, P. R. Tulip and S. J. Clark, Physical Review B 73 (15), 155114 (2006).
  37. [37]D. Porezag and M. R. Pederson, Physical Review B 54 (11), 7830-7836 (1996).
  38. [38]See Supplemental Material at http://link.aps.org/supplemental/xxx.xxx for supplemental figures S1-S7 and supplemental tables S1-S3.
  39. [39]H. Olijnyk, The Journal of Chemical Physics 93 (12), 8968-8972 (1990).
  40. [40]L. J. Bourhis, O. V. Dolomanov, R. J. Gildea, J. A. Howard and H. Puschmann, Acta Crystallogr A Found Adv 71 (Pt 1), 59-75 (2015).

Paper details

vlnc:W_4n5cjuqn
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents