betaFeedback

WorksPhysics and Astronomy

Interpreting the top quark mass using simulations of top-flavoured mesons

Abstract

Active work is being done on the issue of the interpretation of the top quark mass in terms of well-defined theoretical definitions. This work considers this issue by simulating fictitious heavy-light top-flavoured mesons with a fixed mass in Pythia 8.3. Within Heavy Quark Effective Theory, the mass of the top mesons can be related to the pole mass of the top quark. By fitting final-state observables in top pair production at current hadron and future lepton colliders, we extract a negative mass difference between the input Pythia mass for the top quark and the pole mass of around 240240-330330 MeV, consistent with O(ΛQCD)\mathcal{O}(Λ_{\rm QCD}).

Introduction

A precise determination of the top quark mass mtm_t is relevant for several theoretical questions, including electroweak precision tests [1], electroweak-vacuum stability [2, 3], and models of Higgs inflation [4].

Since the top mass is a free parameter of the Standard Model (SM), its numerical value must be extracted from collider experiments. The latest average PDG value is (172.57±0.29)(172.57 \pm0.29) GeV [5], which comes from so-called direct measurements, i.e. the extraction of the top quark mass from the kinematics of ttˉt\bar{t} events, such as the analyses in refs. [6, 7]. This mass extraction happens by comparison to parton shower Monte Carlo event generators such as Pythia [8] or Herwig [9, 10]. Due to this fact, the extracted mass is referred to as the Monte Carlo mass mtMCm_t^{\mathrm{MC}}.

Active work has been done on the theoretical side, to relate the extracted Monte Carlo top quark mass to well-defined theoretical definitions for the top mass such as the pole mass mtpolem_t^{\mathrm{pole}} or the MS scheme mass m‾t(m‾t)\overline{m}_t(\overline{m}_t). The relation between the Monte Carlo mass and e.g. the pole mass can be written on a general form as

mtMC=mtpole+δm⏟Possible shift±Δm⏟Uncertainty,(1)m_t^{\mathrm{MC}} = m_t^{\mathrm{pole}} + \underbrace{\delta m}_{\text{Possible shift}} \pm\underbrace{\Delta m}_{\text{Uncertainty}}, \tag*{(1)}

where δm\delta m is a possible theoretical shift whereas Δm\Delta m is an uncertainty due to the modelling of non-perturbative QCD effects, namely hadronisation dynamics. Indeed, there are two competing views in the literature:

  • δm≃0\delta m \simeq0, i.e. that the Monte Carlo mass can essentially be identified as the pole mass, up to the uncertainty Δm∼O(ΛQCD)\Delta m \sim O(\Lambda_{\mathrm{QCD}}) [11, 12].

  • δm≠0\delta m \ne0, i.e. the Monte Carlo mass is fundamentally different from the pole mass, with estimates of the shift to be from 200 MeV to 1 GeV [13, 14, 15, 16, 17].

The idea of the presented work is to consider the hadronisation of top quarks into fictitious top-flavoured mesons, e.g. T+=(tdˉ)T^{+}=(t\bar{d}), T0=(tuˉ)T^{0}=(t\bar{u}), T−=(tˉd)T^{-}=(\bar{t}d), etc., and then let them decay according to the spectator model. One can then reconstruct the BB-lepton invariant mass mBℓm_{B\ell}, from which it is possible to get a relation between mtMCm_{t}^{\mathrm{MC}} and mTm_{T} by fitting mBℓm_{B\ell}. A relation between mTm_{T} and mtpolem_{t}^{\mathrm{pole}} can then be stated using Heavy Quark Effective Theory (HQET). Finally, using these relations we can obtain an estimate of Δm\Delta m from hadronisation systematics.

These proceedings are based on the study presented in ref. [18], where a detailed account of the analysis can be found. Here, I present a concise summary of the main results discussed in the conference talk.

Simulation of top-flavoured mesons

While it is well-known that the top quark decays before hadronisation due to its large mass and short lifetime, it would nonetheless be interesting to have a Monte Carlo framework capable of producing heavy-light top mesons in order to shed light on the top mass interpretation issue. In this work, we have considered the production of top-anti-top pairs at current hadron and future lepton colliders, simulated with a modified version of the Pythia code that utilises the existing RR-hadron machinery to produce top mesons with a fixed mass, mTm_{T}. For this purpose, we work in the narrow-width approximation by setting the top width to effectively zero.

An illustrative Feynman diagram for the process e+e−→ttˉe^{+}e^{-}\to t\bar{t} with leptonic decays of the WW bosons along with gluon emissions of the top and bottom quarks is shown in Figure 1. Here top quarks undergo the usual decay with parton showers. Then the hadronisation is performed with a model such as the Lund string model [19] in the case of Pythia. Alternatively, Figure 2 illustrates an example of an event where the top quarks from the hard scattering hadronise into TT-mesons which then decay according to a spectator model, where the resulting light spectator and bb quarks undergo the usual hadronisation.

Figure 1. Illustrative diagram for the standard top-anti-top pair production in e+e−e^{+}e^{-} collisions, with leptonic decays, gluon emissions, and finally hadronisation. Reproduced from ref. [18].

Figure 2. Illustrative diagram for the hadronisation of top quarks into top-flavoured mesons in e+e−e^+e^- collisions, with decays according to the spectator model. Reproduced from ref. [18].

Spectator decay model

The fictitious TT-mesons will decay (similarly to BB-mesons) according to the spectator decay model, where the TT-meson is split into a top quark and a light spectator quark, with the top quark undergoing the usual leptonic t→Wb→ℓνbt \to Wb \to\ell\nu b decay,

T+(tdˉ)→(bdˉ)ℓ+ν+X,(2)T^+(t\bar{d}) \to(b\bar{d})\ell^+\nu+ X, \tag*{(2)}

where XX is mainly gluon radiation from the bb quark, and where ℓ=e\ell= e. This is illustrated in Figure 3 albeit without any gluon emissions from the bb quark.

Figure 3. Illustration of the spectator decay of a top-flavoured meson into a BB-meson and a lepton-neutrino pair. Gluon emissions from the bb-quark are not shown. Reproduced from ref. [18].

The light spectator quark will carry a fraction of the TT-meson four-momentum,

xq=mqmT,(3)x_q = \frac{m_q}{m_T}, \tag*{(3)}

where mqm_q is the mass of the spectator quark, which is set to 325 MeV in Pythia by default.

We note that the energetic bb quark produced in the TT decay subsequently initiates a sizeable parton shower. Therefore, as the spectator quark has very little effect on the decay dynamics as well as on the subsequent hadronisation process, it just contributes to the TT-meson mass mTm_T.

Relating the top meson mass to the top pole mass with HQET

Following Heavy-Quark Effective Theory (HQET) [20, 21], the mass of a heavy-light meson QQ containing a heavy quark qq can in general be expanded as

mQ=mq+Λˉ−Δm22mq+O(1mq2),(4)m_Q = m_q + \bar{\Lambda} - \frac{\Delta m^2}{2m_q} + O\left(\frac{1}{m_q^2}\right), \tag*{(4)}

where

  • Λˉ\bar{\Lambda} comes from terms in the Lagrangian independent of mqm_q,

  • Δm2\Delta m^2 comes from O(1/mq)O(1/m_q) terms in the effective HQET Lagrangian,

Δm2=λ1−2[J(J+1)−32]λ2(mq)=λ1+nλ2(mq),(5)\Delta m^2 = \lambda_1 - 2\left[J(J+1)-\frac{3}{2}\right]\lambda_2(m_q) = \lambda_1 + n\lambda_2(m_q), \tag*{(5)}
  • and JJ is the total meson spin.

Here Λˉ\bar{\Lambda}, λ1\lambda_1, and λ2\lambda_2 are scheme-dependent universal QCD parameters. Exploiting flavour-independence and subtracting mBm_B and mTm_T we get

mT=mt+mB−mb−λ1(12mt−12mb)−n2[λ2(mt)mt−λ2(mb)mb],(6)m_T = m_t + m_B - m_b - \lambda_1\left(\frac{1}{2m_t}-\frac{1}{2m_b}\right)-\frac{n}{2}\left[\frac{\lambda_2(m_t)}{m_t}-\frac{\lambda_2(m_b)}{m_b}\right], \tag*{(6)}

which, due to the large top mass, can be approximated by a constant shift between the meson and quark masses,

mT≈mt+Λˉ,(7)m_T \approx m_t+\bar{\Lambda}, \tag*{(7)}

where Λˉ\bar{\Lambda} can be evaluated as

Λˉ=mt+mB−mb+12mb[λ1+nλ2(mb)].\bar{\Lambda}=m_t+m_B-m_b+\frac{1}{2m_b}[\lambda_1+n\lambda_2(m_b)].

We set n=+3n=+3 and use the PDG values for mtm_t, mbm_b, and mBm_B in the pole mass scheme [5]. Generally we have

∣λ1∣∼λ2∼ΛQCD2∼0.1 GeV2,|\lambda_1|\sim\lambda_2\sim\Lambda_{\mathrm{QCD}}^2\sim0.1\ \mathrm{GeV}^2,

but a more precise determination is obtained from ref. [22] for BB-meson decays give

λ1=(−0.58±0.23) GeV2,\lambda_1=(-0.58\pm0.23)\ \mathrm{GeV}^2,

while considerations in ref. [23] from lattice data give the relation

λ2(mb)≈mb2(mB∗−mB)≈(0.1080±0.0014) GeV2.\lambda_2(m_b)\approx\frac{m_b}{2}(m_{B^*}-m_B)\approx(0.1080\pm0.0014)\ \mathrm{GeV}^2.

Finally, we obtain an approximate value of

Λˉ=(0.473±0.064) GeV,\bar{\Lambda}=(0.473\pm0.064)\ \mathrm{GeV},

which agrees with the value from ref. [23] of Λˉ=(0.49±0.08) GeV\bar{\Lambda}=(0.49\pm0.08)\ \mathrm{GeV}.

Results

In this section we present results from our Monte Carlo study with Pythia 8.317. We have simulated standard ttˉt\bar{t} production (referred to as standard samples) as well as the hadronisation of top quarks into TT-mesons as outlined in § 2 (referred to as TT-meson samples). In either type of samples, we vary the input top quark/meson mass mtPythiam_t^{\mathrm{Pythia}} and mTm_T respectively. Additionally we generate all results for two different collider setups:

  • The current LHC Run 3 setup, pp→ttˉpp \to t\bar{t}, s=13.6\sqrt{s} = 13.6 TeV, and

  • a potential future lepton collider (FLC), e+e−→ttˉe^+e^- \to t\bar{t}, s=1\sqrt{s} = 1 TeV.

mBℓm_{B\ell} distributions and extraction of the mass shift

In this section we present results for the differential distribution in the invariant mass mBℓm_{B\ell} of the BB-hadron and the lepton from top quark and TT-meson decays. Figure 4 shows the effect that the uncertainty on Λˉ\bar{\Lambda} in eq. (2.2) has on the mBℓm_{B\ell} distribution. Compared to the usual Monte Carlo error it can be considered negligible.

Figure 4. Differential distributions in mBℓm_{B\ell} for the TT-meson samples with fixed mT=mtpole+Λˉm_T = m_t^{\mathrm{pole}} + \bar{\Lambda} and mtpole=173m_t^{\mathrm{pole}} = 173 GeV at the LHC (a) and FLC (b). The samples come from varying mTm_T within its uncertainty in eq. (2.2). Reproduced from [18]. (a) pp→ttˉpp \to t\bar{t}, at s=13.6\sqrt{s} = 13.6 TeV. (b) e+e−→ttˉe^+e^- \to t\bar{t}, at s=1\sqrt{s} = 1 TeV.

Figure 5 shows a validation plot demonstrating the independence of the mBℓm_{B\ell} distribution for the TT-meson samples on the input top quark mass in \mathrm{Pythia}, mtPythiam_t^{\mathrm{Pythia}}.

Figure 5. (a) pp→ttˉpp \to t\bar{t}, at s=13.6\sqrt{s} = 13.6 TeV. (b) e+e−→ttˉe^+e^- \to t\bar{t}, at s=1\sqrt{s} = 1 TeV. Differential distributions in mBℓm_{B\ell} for the TT-meson samples for fixed mT=mtpole+Λˉm_T = m_t^{\mathrm{pole}} + \bar{\Lambda} with mtpole=173m_t^{\mathrm{pole}} = 173 GeV and different choices of the input top mass mtPythiam_t^{\mathrm{Pythia}}. Reproduced from ref. [18].

An observable related to the mBℓm_{B\ell} distribution is the event-wise average ⟨mBℓ⟩\langle m_{B\ell}\rangle which can be expressed with a linear dependence on the input \mathrm{Pythia} top mass for the standard samples,

⟨mBℓ⟩=a×mtPythia+b(8)\langle m_{B\ell}\rangle= a \times m_t^{\mathrm{Pythia}} + b \tag*{(8)}

and on the top meson mass in TT-meson samples,

⟨mBℓ⟩=a′×mT+b′(9)\langle m_{B\ell}\rangle= a' \times m_T + b' \tag*{(9)}

The linear fits are shown in Figure 6 and give for the standard samples,

Figure 6. Linear fits of the average ⟨mBℓ⟩\langle m_{B\ell}\rangle for the TT-meson samples (in orange) and the standard ttˉt\bar{t} samples (in blue) varying mTm_T and mtPythiam_t^{\mathrm{Pythia}} respectively. Reproduced from [18].

⟨mBℓ⟩pp≃0.571 mtPythia−21.51 GeV,δ=0.011 GeV;(10)\langle m_{B\ell}\rangle_{pp} \simeq0.571\,m_t^{\mathrm{Pythia}} - 21.51\ \mathrm{GeV},\quad\delta= 0.011\ \mathrm{GeV}; \tag*{(10)}
⟨mBℓ⟩ee≃0.568mtPythia−20.95 GeV,δ=0.014 GeV.(11)\langle m_{B\ell}\rangle_{ee} \simeq0.568m_t^{\mathrm{Pythia}} - 20.95\ \mathrm{GeV},\quad\delta= 0.014\ \mathrm{GeV}. \tag*{(11)}

The linear fits for the TT-meson samples give

⟨mBℓ⟩pp≃0.563mT−20.53 GeV,δ=0.010 GeV;(12)\langle m_{B\ell}\rangle_{pp} \simeq0.563m_T - 20.53\ \mathrm{GeV},\quad\delta= 0.010\ \mathrm{GeV}; \tag*{(12)}
⟨mBℓ⟩ee≃0.566mT−20.91 GeV,δ=0.013 GeV.(13)\langle m_{B\ell}\rangle_{ee} \simeq0.566m_T - 20.91\ \mathrm{GeV},\quad\delta= 0.013\ \mathrm{GeV}. \tag*{(13)}

The residual standard deviation of the fit is defined as

δfit=1N−2∑i=1N[⟨mBℓ⟩i−(a×mt,iPythia+b)]2.(14)\delta_{\mathrm{fit}} = \sqrt{\frac{1}{N-2}\sum_{i=1}^{N}\left[\langle m_{B\ell}\rangle_i-\left(a\times m_{t,i}^{\mathrm{Pythia}}+b\right)\right]^2}. \tag*{(14)}

The slopes agree well within the errors, i.e. a≈a′a \approx a'. Re-performing the linear fits with fixed slopes, and using the HQET result, mT≈mtpole+Λˉm_T \approx m_t^{\mathrm{pole}}+\bar{\Lambda}, with Λˉ≈0.473\bar{\Lambda}\approx0.473 GeV, we find a mass difference of

mtPythia−mtpole=−0.24±0.07 GeV(for pp collisions),(15)m_t^{\mathrm{Pythia}}-m_t^{\mathrm{pole}}=-0.24\pm0.07\ \mathrm{GeV}\qquad\text{(for }pp\text{ collisions)}, \tag*{(15)}
mtPythia−mtpole=−0.33±0.07 GeV(for e+e− collisions),(16)m_t^{\mathrm{Pythia}}-m_t^{\mathrm{pole}}=-0.33\pm0.07\ \mathrm{GeV}\qquad\text{(for }e^+e^-\text{ collisions)}, \tag*{(16)}

which are consistent with a mass difference of O(ΛQCD)O(\Lambda_{\mathrm{QCD}}).

Sensitivity to the recoil treatment in top decays

Monte Carlo event generators include phenomenological models of non-perturbative QCD effects which are not necessarily derived from first principles. One such effect that has received a lot of attention recently, is the recoil treatment in top decays. This is an ambiguity that arises in the treatment of the top decays t→Wb+Xt\to Wb+X in dipole parton showers. The first gluon emission, illustrated in Figure 7, is controlled by matrix element corrections. But for the second gluon emission there are different possible prescriptions for the recoil treatment. Indeed the ATLAS analysis in ref. [24] sees an effect of approximately 250 MeV.

Figure 7. Illustrative diagram of a first gluon emission from the bb quark in a top decay.

In Pythia, there are two options: Letting the WW act as the recoiler (the default option) or letting the bb quark act as the recoiler. In Figure 8 we show the effect of this option on the linear fit to ⟨mBℓ⟩\langle m_{B\ell}\rangle. The effect size this option gives is approximately 40 MeV for pppp collisions and 120 MeV for e+e−e^+e^- collisions, where the difference is within the respective Monte Carlo errors.

Figure 8. The difference in mass, mtPythia−mtpolem_t^{\mathrm{Pythia}} - m_t^{\mathrm{pole}}, extracted from the linear fits to ⟨mBℓ⟩\langle m_{B\ell}\rangle shown for default Pythia parameters and for the choice of the bb-quark for the shower recoil in the top decays. Adapted from ref. [18].

Conclusions

In this work, we have implemented the formation of heavy-light top mesons in Pythia to understand better the size of effects that uncertainties from non-perturbative modelling in Monte Carlo event generators introduce on the interpretation of the top quark mass. The mass of the top mesons can then be related to the top quark pole mass using Heavy Quark Effective Theory. Then by fitting the input top quark mass in Pythia with the top meson mass, we find a negative mass difference of 240–330 MeV, consistent with O(ΛQCD)O(\Lambda_{\mathrm{QCD}}).

For a more detailed discussion, see ref. [18].

The implementation of the hadronisation of top quarks into top mesons and their subsequent spectator decay in Herwig 7.3.0 is ongoing and is expected to appear in future work.

The presented work was carried out in collaboration with Gennaro Corcella at the Laboratori Nazionali di Frascati.

References

  1. [1]J. de Blas, M. Pierini, L. Reina, L. Silvestrini, Impact of the Recent Measurements of the Top-Quark and W-Boson Masses on Electroweak Precision Fits, Phys. Rev. Lett. 129, 271801 (2022), arXiv:2204.04204 [hep-ph]. 10.1103/PhysRevLett.129.271801
  2. [2]G. Degrassi, S. Di Vita, J. Elias-Miró, J.R. Espinosa, G.F. Giudice, G. Isidori, A. Strumia, Higgs mass and vacuum stability in the Standard Model at NNLO, JHEP 08, 098 (2012), arXiv:1205.6497 [hep-ph]. 10.1007/JHEP08(2012)098DOI
  3. [3]G. Domènech, M. Goodsell, C. Wetterich, Neutrino masses, vacuum stability and quantum gravity prediction for the mass of the top quark, JHEP 01, 180 (2021), arXiv:2008.04310 [hep-ph]. 10.1007/JHEP01(2021)180DOI
  4. [4]J.G. Rodrigues, M. Benetti, R. de Souza, J. Alcaniz, Higgs inflation: Constraining the top quark mass and breaking the H0-σ8 correlation, Phys. Lett. B 852, 138607 (2024), arXiv:2301.11788 [astro-ph.CO]. 10.1016/j.physletb.2024.138607DOI
  5. [5]S. Navas et al. (Particle Data Group), Review of particle physics, Phys. Rev. D 110, 030001 (2024). 10.1103/PhysRevD.110.030001
  6. [6]G. Aad et al. (ATLAS), Measurement of the top quark mass with the ATLAS detector using tt̄ events with a high transverse momentum top quark (2025), arXiv:2502.18216 [hep-ex].
  7. [7]A. Hayrapetyan et al. (CMS), Review of top quark mass measurements in CMS, Phys. Rept. 1115, 116 (2025), arXiv:2403.01313 [hep-ex]. 10.1016/j.physrep.2024.12.002
  8. [8]C. Bierlich et al., A comprehensive guide to the physics and usage of PYTHIA 8.3, SciPost Phys. Codeb. 2022, 8 (2022), arXiv:2203.11601 [hep-ph]. 10.21468/SciPostPhysCodeb.8arxiv.org/abs/2203.11601
  9. [9]J. Bellm et al., Herwig 7.0/Herwig++ 3.0 release note, Eur. Phys. J. C 76, 196 (2016), arXiv:1512.01178 [hep-ph]. 10.1140/epjc/s10052-016-4018-8DOI
  10. [10]G. Bewick et al., Herwig 7.3 release note, Eur. Phys. J. C 84, 1053 (2024), arXiv:2312.05175 [hep-ph]. 10.1140/epjc/s10052-024-13211-9arxiv.org/abs/2312.05175
  11. [11]P. Nason, Theory Summary, PoS TOP2015, 056 (2016), arXiv:1602.00443 [hep-ph]. 10.2223/1.257.0056arxiv.org/abs/1602.00443
  12. [12]P. Nason, The Top Mass in Hadronic Collisions (2019), pp. 123–151, arXiv:1712.02796 [hep-ph]arxiv.org/abs/1712.02796
  13. [13]S. Fleming, A.H. Hoang, S. Mantry, I.W. Stewart, Jets from massive unstable particles: Top-mass determination, Phys. Rev. D 77, 074010 (2008), arXiv:hep-ph/0703207. 10.1103/PhysRevD.77.074010DOI
  14. [14]A.H. Hoang, I.W. Stewart, Top Mass Measurements from Jets and the Tevatron Top-Quark Mass, Nucl. Phys. B Proc. Suppl. 185, 220 (2008), arXiv:0808.0222 [hep-ph]. 10.1016/j.nuclphysbps.2008.10.028DOI
  15. [15]M. Butenschoen, B. Dehnadi, A.H. Hoang, V. Mateu, M. Preisser, I.W. Stewart, Top Quark Mass Calibration for Monte Carlo Event Generators, Phys. Rev. Lett. 117, 232001 (2016), arXiv:1608.01318 [hep-ph]. 10.1103/PhysRevLett.117.232001DOI
  16. [16]A.H. Hoang, S. Mantry, A. Pathak, I.W. Stewart, Extracting a Short Distance Top Mass with Light Grooming, Phys. Rev. D 100, 074021 (2019), arXiv:1708.02586 [hep-ph]. 10.1103/PhysRevD.100.074021DOI
  17. [17]A.H. Hoang, S. Plätzer, D. Samitz, On the Cutoff Dependence of the Quark Mass Parameter in Angular Ordered Parton Showers, JHEP 10, 200 (2018), arXiv:1807.06617 [hep-ph]. 10.1007/JHEP10(2018)200DOI
  18. [18]G. Corcella, A. Lind, Top-quark mass interpretation from simulation of top-flavoured mesons, JHEP (2026), accepted for publication, arXiv:2607.24935 [hep-ph].arxiv.org/abs/2607.24935
  19. [19]B. Andersson, G. Gustafson, G. Ingelman, T. Sjöstrand, Parton Fragmentation and String Dynamics, Phys. Rep. 97, 31 (1983). 10.1016/0370-1573(83)90080-7
  20. [20]M. Neubert, Heavy quark effective theory, in 20th Johns Hopkins Workshop on Current Problems in Particle Theory: Non-Perturbative Particle Theory and Experimental Tests (1996), pp. 39–78, arXiv:hep-ph/9610385DOI
  21. [21]A.V. Manohar, M.B. Wise, Heavy quark physics, Vol. 10 (Cambridge University Press, 2000), ISBN 978-0-521-03757-9, 978-1-009-40412-5DOI
  22. [22]K.K. Jeong, C.S. Kim, Determination of HQET parameter lambda(1) from inclusive semileptonic B meson decay spectrum, Phys. Rev. D 59, 114019 (1999), arXiv:hep-ph/9811475. 10.1103/PhysRevD.59.114019DOI
  23. [23]A. Nefediev, Extraction of nonperturbative parameters for D(*) mesons from lattice data, Phys. Rev. D 109, 094021 (2024), arXiv:2404.11158 [hep-lat]. 10.1103/PhysRevD.109.094021DOI
  24. [24]G. Aad et al. (ATLAS), Measurement of the top-quark mass using a leptonic invariant mass in pp collisions at √s = 13 TeV with the ATLAS detector, JHEP 06, 019 (2023), arXiv:2209.00583 [hep-ex]. 10.1007/JHEP06(2023)019

Paper details

vlnc:W_4scm7tgj
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 13

downloads · 2

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents