WorksPhysics and Astronomy
Origin of Charge Density Wave in Topological Semimetals SrAl4 and EuAl4
Abstract
Topological semimetals in BaAl4-type structure show many interesting behaviors, such as charge density wave (CDW) in SrAl4 and EuAl4, but not the isostructural and isovalent BaAl4, SrGa4 and BaGa4. Here using Wannier functions based on density functional theory, we calculate the susceptibility functions with millions of k-points to reach the small q-vector and study the origin and driving force behind the CDW. Our comparative study reveals that the origin of the CDW in SrAl4 and EuAl4 is the strong electron-phonon coupling interaction for the transverse acoustic mode at small q-vector along the {Gamma}-Z direction besides the maximum of the real part of the susceptibility function from the nested Fermi surfaces of the Dirac-like bands, which explains well the absence of CDW in the other closely related compounds in a good agreement with experiment. We also connect the different CDW behaviors in the Al compounds to the macroscopic elastic properties.
Introduction
The interplay between charge density wave (CDW) and topological phases has received much attention due to the perspective of coupling many-body interaction with non-trivial band structure topology. For example, the nesting Weyl points gapped by chiral symmetry breaking have been proposed to give arise to topological superconductivity[1, 2] or CDW with the latter to realize axion electrodynamics[3] for the case of opposite chirality or a topological phase with monopole harmonic order[4] for the same chirality. The Fermi surface nesting (FSN) among Weyl points has been recently studied for the CDW in the quasi-1D [5, 6] and the long-wavelength helical magnetic order in [7]. Very recently CDW has been observed in the chiral [8, 9] with Kramer-Weyl points. CDW has also been used[10] to engineer topological phases to realize Dirac points close to the Fermi energy (). However, besides FSN, the emergence of CDW also need the important ingredient of electron-phonon coupling[11, 12] (EPC). The traditional view of CDW comes from Peierls’ instability[13] with perfect FSN in 1D to induce Kohn anomaly or soft phonon mode, which results in a structural transition at low temperature. This ideal 1D picture of CDW has been pervasive in condensed matter physics, but was recently substantially revised for real materials[14, 15]. Density functional theory[16, 17] (DFT) calculations[18, 19] and experiments[20, 21] on and have shown that the CDW in these compounds is determined by the real part of linear response or susceptibility function, , with a large EPC interaction to soften the acoustic phonon mode, while not by the FSN from the imaginary part of susceptibility function, , which gives a nesting vector not necessarily corresponding to the CDW -vector in these specific compounds.
Here by studying the topological semimetals , and the related compounds, we take a closer look at the microscopic mechanism for the CDW with topological non-trivial bands and find the critical role of EPC interaction or matrix element play for the CDW in and beyond just FSN of the nodal line Dirac-like bands. Topological semimetal compounds in the BaAl4-type structure[22] have shown a range of interesting behaviors with a martensitic tetragonal-to-monoclinic structural transition in [23], CDW in and [24, 25, 26, 27, 28], and multiple magnetic transitions, topological Hall effects and Skyrmions in and related magnetic compounds at different temperature[25, 29, 30, 31, 32, 33, 34, 35]. The CDW in and has been measured to have a small -vector along the - direction. But there is still a lack of understanding of the origin and driving force behind this CDW. Even more interesting is among the non-magnetic isostructural and isovalent series of SrAl, BaAl, SrGa and BaGa, a recent experiment[24] has found that only SrAl has CDW at 243 K. Such distinctly different behaviors regarding CDW make these topological semimetals the perfect subjects to test the proposed mechanism[14, 15] for CDW as being dominated by EPC interaction instead of FSN.
In this paper, we report a comparative computational study to reveal the origin of the CDW observed in SrAl and EuAl, but its absence in BaAl and the two Ga compounds. We calculate both and using Wannier functions with millions of -points to reach the small -vector. Although all of them are topological semimetals with nodal lines in the absence of spin-orbit coupling (SOC) and host Dirac points (DPs) with SOC as protected by the 4-fold rotational symmetry, these DPs are eV above the Fermi energy (). The dominating features at instead are the Fermi surface (FS) shells formed by the tip and dip of the nodal line Dirac-like band dispersion with two nearby crossings of the . With the imperfect FSN from , the FS shells give the maximum of the real part of susceptibility function, , along the - direction with a small finite -vector for all the three Al compounds, but not the Ga compounds. Then among SrAl, BaAl and EuAl, the EPC calculations from density functional perturbation theory[36] (DFPT) show a larger EPC interaction or matrix element in SrAl and EuAl than BaAl for the transverse acoustic (TA) mode at about the same -vector of along the - direction to induce the TA mode to be imaginary. Our study reveals that the origin of the CDW in SrAl and EuAl is the strong EPC interaction for the TA mode at small -vector along the - direction, besides the from the nested FS shells of nodal line Dirac-like bands, which explains well the absence of CDW in the other closely related isostructural and isovalent compounds, in a good agreement with experiment[24]. The different behaviors of the TA mode CDW can also be better understood in connection to the different macroscopic shear modulus and Poisson ratio. We find that the electron charge density redistribution between the Al network and different cation layers indicates the more ionic interaction in BaAl than SrAl and EuAl, thus can explain these different CDW and elastic behaviors. It is interesting to find the link between the TA mode CDW with microscopic EPC interaction and the macroscopic elastic properties.
Results and Discussion
Topological band structures
Using SrAl as an example, the body-centered tetragonal (Pearson symbol tI10) crystal structure in space group 139 () is shown in Figure 1(a). The bulk first Brillouin zone (BZ) and (001) surface BZ with the high symmetry -points are displayed in Figure 1(b). The two Al sites are non-equivalent with at (0.5, 0.0, 0.25) and at (0.0, 0.0, ). These Al sites form a network of buckled square lattices sandwiched between the electron-donating Sr layers at the site. Such structure is the binary version of the Fe-based superconductors and the related 122 compounds, where the two non-equivalent and sites are replaced by transition metals (Fe, Co, and Ni) and main group V elements (As, P), respectively. Noticeably, the shortest Al-Al distance of 2.598 Å (DFT 2.616 Å) is between the two sites from the two neighboring buckled square lattices along the 4-fold -axis, which is slightly shorter than the Al-Al distance of 2.690 Å (DFT 2.688 Å) among the same buckled square lattice (see Supplementary Table 1).

Figure 1. Topological electronic band structures of SrAl. (a) Crystal structure of SrAl in the body-centered tetragonal (tI10) of space group 139 (). Sr (Al) is in large green (small blue) spheres. (b) Bulk Brillouin zone (BZ) with high symmetry -points and those on (001) surface BZ are labeled. A pair of Dirac points (DPs) along - direction are indicated by red dots. (c) SrAl band structure calculated in density functional theory (DFT) with spin-orbit coupling (SOC). The highest valence and lowest conduction bands are in blue and red, respectively. The dispersion along - is zoomed around the DP in (d) with the irreducible representations labeled and also the Al orbital projection at site in green shade. (e) Nodal lines on the (110) plane shown by the zero gap. (f) Surface spectral function along the (001) - direction. (g) (001) 2D Fermi surface at eV with spin texture shown in green arrows. (h) Surface spectral function along the (001) - direction showing the topological surface states converging to the projection of DPs in different directions together with (f).
The DFT-calculated band structure of SrAl is plotted in Figure 1(c). The highest valence and lowest conduction bands according to simple filling are highlighted in blue and red, respectively. The multiple sawtooth Dirac-like dispersion of the valence and conduction bands near the E point to a topological semimetal with nodal lines. Indeed, as plotted in Figure 1(e) for the band gap contours on the (110) plane without SOC, there are a nodal loop around the Z point and also nodal lines away from the - direction toward the X point. More nodal lines and loops are plotted on (001) and (100) planes in Supplementary Figure S1. These nodal lines and Dirac-like dispersion are protected by the different sets of mirror symmetries, which are similar to the topological semimetal series of ZrSiS and the related compounds with square lattices of -orbitals[37]. With SOC, these crossings in nodal lines are all gapped out except for the one along the - direction as zoomed in Figure 1(d). The point group symmetry is D. We have used Vasp2trace[38, 39] to analyze the elementary band representations. From the double group representation of D for the spinful system, the top valence band along the - direction with the 4-fold rotation switches between two different 2-dimensioinal irreducible representations of and , thus there is no mixing guarantied at the band crossing, or equivalently speaking, the pair of DPs is protected by the 4-fold rotational symmetry[40, 41, 42, 43, 44, 45]. Our results also agree with the previous study[22] on BaAl for the DPs along the - direction.

Figure S1. Bulk band structure of SrAl4 without SOC and the nodal lines with zero gap on more planes in addition to that in Figure 1(e). (a) Calculated SrAl4 band structure without SOC. The top valence and conduction bands are in blue and red, respectively, with bulk Brillouin zone shown on the right. (b) Nodal lines on the (001) plane shown by the zero gap. (c) Nodal lines on the (010) plane shown by the zero gap.
The locations of the DPs are also indicated in the BZ by the red dots in Figure 1(b) at the momentum energy of (0, 0, Å; E+0.2186 eV). When projected on the (001) surface, the pair of DPs overlap, but there are still topological surface states converging to the DP projection as shown in Figure 1(f) along the - direction. The spin texture in Figure 1(g) shows that these surface states are spin-momentum locked as expected for topological non-trivial surface states. Furthermore, we have also plotted these topological surface states in the other direction of - in Figure 1(h) with quite different band dispersion, but still they converge to the same DP projection. Because the DPs are 0.22 eV above the E, the physical properties such as CDW is not directly determined by the DPs, but rather the 3D FS of the nodal line Dirac-like band dispersion near the E.
Susceptibility functions and phonon dispersions
The 3D FS of SrAl is plotted in Figure 2(a). The valence band FS with hole pockets (yellow outside and blue inside) are centered around the point, while the conduction band FS with electron pockets (purple outside and green inside) are around the point. Because of the Dirac-like dispersion, when the bands cross the E twice nearby along the same high symmetry directions with a dip or tip of the Dirac-like bands, they form FS of thin shells instead of space-filled objects. Such features can be clearly seen when the 3D FS are separated into the hole and electron pieces with a near top-view in Figure 2(b) and (c), respectively. To study FSN and CDW from band structure, the bare susceptibility function[14], , based on DFT single-particle Kohn-Sham bands needs to be calculated in real and imaginary parts,

Figure 2. Fermi surface, susceptibility functions, phonon dispersion and charge density wave of SrAl₄. (a) SrAl₄ Fermi surface (FS) consists of valence (yellow outside and blue inside) and conduction band (purple outside and green inside) from the side-view. The individual FS pieces of valence and conduction bands from the near top-view are in (b) and (c), respectively. (d) 3D real part of the susceptibility function as in of SrAl₄ with the iso-surface value of 0.999 showing the maximum at . (e) The imaginary part of the susceptibility functions along the - direction for the four compounds. The vertical dashed line marks the experimental charge density wave (CDW) vector for SrAl₄ at . (f) 2D FS cut on the (110) plane showing the FS shells of the valence and conduction bands in SrAl₄ with the nesting vector marked by an orange arrow. The high (low) intensity is in red (grey). (g) The real part of the susceptibility functions along the - direction. (h) Phonon band dispersion of SrAl₄ with imaginary transverse acoustic (TA) mode along the - direction (black arrow).
where and are the Fermi-Dirac distribution and Delta functions, respectively, of the -th band energy eigenvalue at the point with the E set to zero. The calculation of requires very dense double meshes ( and ). Using the maximally localized Wannier functions[46, 47] (MLWF), we are able to calculate the 3D susceptibility function efficiently with millions of -points in the BZ.
The real part of the 3D susceptibility function of SrAl is shown in Figure 2(d) for the whole BZ with its maximum appearing as two small red spheres along the - direction with a small finite -vector. As plotted along the - direction in 1D in Figure 2(g), the calculated -vector for is for SrAl, agreeing well with the experimental data of (dashed line) for the observed incommensurate CDW at 243 K[24]. Such a CDW -vector has usually been associated with FSN, i.e., the sharp peaks in the imaginary part of susceptibility function, , especially for 1D cases. But as plotted in Figure 2(e) along the - direction, the peak in the of SrAl around is not sharp, indicating an imperfect nesting due to the 3D nature of the FS in real materials.
The imperfect nesting vector along the direction in SrAl arises from the pyramid-shape valence FS shell in Figure 2(b) and is also indicated by an orange arrow in the 2D FS contour on the (110) plane in Figure 2(f). The calculated phonon band dispersion of SrAl is plotted in Figure 2(h) showing an imaginary TA phonon mode (black arrow) along the - direction with a -vector of , which matches that of calculated . This match of the -vector of the and imaginary TA mode in SrAl shows that and the imperfect FSN can be an indicator for CDW. However, we will later show that imperfect FSN and the does not necessarily guarantee a CDW in the case of BaAl, because BaAl lacks a strong enough EPC to induce a soft phonon mode.
For the other three non-magnetic isostructural and isovalent compounds of BaAl, SrGa and BaGa, their band structures and FS are plotted in Fig.3 for comparison to SrAl. BaAl has a very similar band structure and FS to SrAl, as shown in Fig.3(a) and Fig.3(d), only with small difference at the BZ boundaries. BaAl retains the pyramid-shape valence FS shell around the point and the interlocked pattern of the hole and electron FS shells. The of BaAl as plotted in Figure 2(e), also has a maximum along the - direction, which has a larger -vector and with a more extended plateau than that of SrAl. In contrast, the of BaAl in Figure 2(g) is at a smaller -vector than that of SrAl. This shows a more imperfect FS nesting in BaAl than SrAl and the mismatch of the peaks in and is not unexpected, because the latter include contributions from the bands away from the . As plotted in Supplementary Figure S2, the phonon band dispersion of BaAl does not have an imaginary phonon mode or CDW near the -vector.

Figure S2. Phonon band dispersion of (a) BaAl, (b) SrGa and (c) BaGa.
Next for SrGa in Fig. 3(b) and (e), besides the extra band inversion at the point, the main difference is the upshift of the valence bands along the - direction. The inner shell of the hole pockets at the point almost merge into a single large pocket with the next valence band touching the along the - direction to form a small ring-shape pocket (red) around the point. As the results, the -vector along the - direction for SrGa is reduced toward as plotted in Figure 2(g). SrGa does not have a CDW either as shown by the absence of imaginary phonon dispersion in Supplementary Figure S2. Moving to BaGa in Fig. 3(c), the top valence band along the - direction is pushed to even higher energy with the next valence band now crossing the to give a squarish hole pocket (red) centered at the point as seen in Fig. 3(f). The imperfect FSN along the - direction now totally disappears, resulting in no maximum of near the point for BaGa in Figure 2(g). Although the for BaGa is now at the point, there are no imaginary phonon modes as shown in Supplementary Figure S2, thus no CDW either. These results from the calculated and phonon dispersion show only CDW in SrAl but not the other three non-magnetic compounds with the same crystal structure and number of valence electrons, which agree well with experimental observations[24].
Electron-phonon coupling and CDW
Despite the similar band structure, FS and also the finite small -vector for the in BaAl when compared to SrAl, the absence of CDW in BaAl demands a closer look. To reveal the origin of the observed CDW in SrAl but not BaAl, using density functional perturbative theory (DFPT), we have calculated the phonon lifetime due to EPC, i.e. the imaginary part of the phonon self-energy, which is proportional to both the EPC matrix elements and . As plotted in Figure 4(a) with different electronic smearing, the for the TA mode along the - direction in SrAl is two to three times larger than that in BaAl. To put the EPC of the TA mode into perspective among all the other modes, can be converted into the dimensionless mode-resolved EPC strength as in , where is the electronic density of states at . With the electronic smearing of 0.04 Ry to stabilize the imaginary TA mode in SrAl, the calculated for both SrAl and BaAl are plotted on top of their phonon dispersion in Figure 4(c) and (d) for comparison. As seen from the green shade for , the largest difference is that SrAl (Figure 4(c)) has a much larger than BaAl (Figure 4(d)) for the TA mode. Unlike SrAl, the of BaAl for the TA mode only has similar magnitude to the other modes near the and points. The eigenvectors of the TA mode (E) and three such zone-center optical modes E (2.3 THz), B (6.9 THz) and A (10.8 THz) of SrAl are shown in Figure 4(e). The E mode corresponds to the in-plane motion of Al network, while the B and A modes at higher frequency correspond to out-of-plane motion of Al network. EPC interaction also directly affects the size of the phonon softening via the real part of phonon self-energy. The decorated plots show that SrAl is subjected to a larger size of phonon softening than BaAl. Given the small frequency of the TA mode near , the larger phonon softening in SrAl can induce this mode to be imaginary and give the CDW instability. As plotted in Figure 4(b) for the dispersion of TA mode with different electronic smearing, in contrast to BaAl, this mode in SrAl has a substantial softening with the decreasing smearing size (mimicking the electronic temperature) due to the stronger EPC interaction. At the smearing of 0.02 Ry, the TA mode becomes imaginary at a -vector around 0.24(), in a good agreement with the experimentally observed [24].

Figure 4. Comparison of electron-phonon coupling between SrAl and BaAl. Calculated phonon (a) lifetime and (b) dispersion for the transverse acoustic mode along the - direction with different smearing in Ry for SrAl (solid lines) and BaAl (dashed lines). (c) and (d) Phonon band dispersion decorated with the mode-resolved electron-phonon coupling (EPC) strength () in green shadow for SrAl and BaAl, respectively, with the electronic smearing of 0.04 Ry. (e) Eigenvectors of the four zone-centered phonon modes with sizable from low to high frequency as shown in (c) and (d). The atomic displacements are indicated by red arrows and the corresponding irreducible representations of E, E, B and A are labeled.
When Sr is replaced by Ba going from SrAl to BaAl and with the similar FSN, the conventional wisdom is that with a larger mass of Ba than Sr giving lower phonon frequencies, the phonon softening to imaginary mode should be easier and CDW should also exist in BaAl, assuming EPC interaction stay almost the same. However, both these assumptions are not true for the TA mode along the - direction here. Firstly, comparing the phonon dispersion of SrAl (Figure 4(c)) to BaAl (Figure 4(d)), the highest phonon energy is reduced from 10.8 THz in SrAl to 9.9 THz in BaAl and the overall phonon energy range is rescaled by the mass factor as expected. Along the - direction, the longitudinal acoustic (LA) mode is also reduced from 3.0 THz in SrAl to 2.3 THz in BaAl at the point. However, the TA mode changes in the opposite direction and increases from 1.4 THz in SrAl to 1.8 THz in BaAl at the point as also shown in Figure 4(b). The first optical E mode at for the in-plane motion of Al network also increases from 2.3 THz in SrAl to 2.7 THz in BaAl. Secondly, comparing the TA mode lifetime between BaAl and in Figure 4(a), the lifetime of the TA mode in becomes smaller than that in for both large and small -vectors. Note the lifetime accounting for the EPC interaction has no mass dependence through by definition. It evaluates the deformation of potential experienced by the electrons on FS due to the structural distortion from phonon modes as convoluted by the . The same EPC matrix elements of the deformed potential are also used to calculate the real part of the Green’s function for the phonon softening via convolution with . In Figure 4(a), lifetime shows that the EPC interaction is two to three times smaller in than for the TA mode along the - direction. Thus, when going from to , both the increase in the single-particle (bare) phonon frequency and the decrease in EPC interaction of the TA mode work against the phonon softening in . As the results, unlike , there is no CDW in .
The above analysis focusing on EPC interaction besides imperfect FSN can also explain the behavior of , which has a CDW at K above the Neel temperature, albeit with an even larger mass of Eu than Ba. The band structure and FS of the nonmagnetic (no Eu ) in Figure 5(a) and (b) resemble those of in Figure 1(c) and 2(a), respectively. The DP has the momentum-energy at . The FS shell of the conduction band is similar to that of , except for the larger electron pocket at the point than . The FS shell of the valence band is also similar to that of , giving a similar imperfect FSN in as plotted in Figure 5(d) and (e) with a slightly smaller nesting -vector at than . Noticeably, the of has a relatively narrow peak similar to at the small -vector, rather than the extended plateau of . The 3D of plotted in the full first BZ in Figure 5(c) shows the maximum is indeed only along the - direction. For the TA mode dispersion plotted in Figure 5(e) in comparison to and , although in term of atomic mass , the TA mode of is the highest among the three in the order of at the point. Then although they all have similar -vector along the - direction in Figure 5(f), the three EPC interactions of the TA mode are quite different. As plotted in Figure 5(g), the of has an interesting behavior as a function of when compared to and . At small- (), the of increases fast like , but then plateau like and next decreases at large- to be even smaller than BaAl. Although the maximum of for the TA mode in EuAl is smaller than that of BaAl, its value at small- () instead is larger than BaAl and closer to that of SrAl. The small -vector range of the EPC interaction is the most relevant to CDW because of the small -vector. Thus, the EPC strength shown by at small- () is in the order of SrAl > EuAl > BaAl, explaining why both SrAl and EuAl have CDW, while BaAl does not, even though all three have imperfect FSN and -vector.

Figure 5. Band structure, electron-phonon coupling and bonding in with comparison to and . (a) bulk band structure with the top valence and conduction bands plotted in blue and red, respectively. (b) Fermi surface (FS) consists of valence (yellow outside and blue inside) and conduction bands (purple outside and green inside) from the side-view. (c) 3D real part of susceptibility function with the maximum value shown as red pockets. (d) The 1D imaginary part of susceptibility function plotted along the - direction () for , and . (e) Calculated phonon dispersion of the transverse acoustic (TA) mode along the - direction with an electronic smearing of 0.015 Ry for the three compounds. (f) The 1D real part of susceptibility function . (g) The lifetime for the TA mode. (h-j) Electron charge density of for X=Sr, Ba and Eu, respectively. The positive (negative) iso-surfaces of (e/) are shown in yellow (cyan) on the outside and blue from inside.
The TA mode CDW here involves a local shear distortion perpendicular to the -axis. It is very interesting to notice that among the calculated bulk elastic properties (see Table 1), the bulk modulus (B) of 50.6 GPa for BaAl is slightly smaller than the 52.9 GPa for SrAl, reflecting a larger cation size of Ba than Sr, giving both larger and lattice constants with a slightly smaller ratio. However, the shear modulus (G) of 36.8 GPa for BaAl is larger than the 29.1 GPa for SrAl. This corresponds to a much smaller Poisson ratio of 0.207 for BaAl than the 0.268 for SrAl, which means a compression along the -axis has a less in-plane expansion in response for BaAl than SrAl, i.e., the in-plane interaction is stiffer for BaAl than SrAl. Then moving to EuAl with the smallest lattice constants among the three, both B of 57.1 GPa and G of 33.9 GPa increase comparing to SrAl. But the G of EuAl is still smaller than that of BaAl, resulting in a Poisson ratio of 0.252 similar to that of SrAl, not BaAl. Thus, the in-plane interaction in EuAl is still softer than BaAl.
To better understand these differences from electronic structure, we have plotted and compared the electron charge density difference of for X=Sr, Ba and Eu, respectively in Figure 5 (h-j). The charge density redistributions between the Al network and the different cation layers show that there is more electron transferred from the Ba layer to Al network and also more charge accumulation (yellow) at the boundary between the Ba and Al network than the cases of Sr and Eu. The more ionic character of the interaction in BaAl with more in-plane charge accumulation makes it harder for the in-plane shear distortion between the Al network and Ba layer, which explains a much smaller Poisson ratio for BaAl than SrAl and EuAl. This also means the TA mode softening for CDW with the local shear distortion in BaAl is much harder than that in SrAl and EuAl. It is interesting to find the connection between the CDW with microscopic EPC interaction and the macroscopic elastic properties.
Conclusions
In conclusion, using the approaches based on density functional theory, we have explained the origin of charge density wave (CDW) in SrAl and EuAl in comparison to the BaAl, SrGa and BaGa. Although all of them have nodal lines in the absence of spin-orbit coupling (SOC) and become Dirac semimetals with SOC, the Dirac points are eV above the Fermi energy (E). The Dirac-like dispersion of the valence and conduction bands form Fermi surface (FS) shells providing imperfect FS nesting (FSN) along the - direction for the three Al compounds, but not the Ga compounds due to the second valence band being pushed up to cross the E. The susceptibility functions, , have been calculated efficiently on a dense mesh of millions of -points with the maximally localized Wannier functions (MLWF). The imperfect FSN is verified by the maximum of the real part of susceptibility function, , along the - direction with a small -vector for the Al compounds, while it is absence in the Ga ones. Then among the three Al compounds, the electron-phonon coupling (EPC) calculations show a large EPC interaction at small -vector for the transverse acoustic (TA) mode along the - direction for SrAl and EuAl, which provides the driving force for the CDW to soften the TA mode, while it is absence in BaAl. Our study reveals that the origin of the CDW in SrAl and EuAl is the strong EPC interaction for the TA mode along the - direction at small -vector, besides the from the nested FS shells of nodal line Dirac-like bands, which explains well the experimental observations. We also connect the different TA mode CDW distortion to the different macroscopic shear modulus and Poisson ratio. We find that the electron charge density redistribution between the Al network and different cation layers indicates the more ionic interaction in BaAl than SrAl and EuAl, thus explains these different CDW and elastic behaviors.
Methods
Density functional theory[16, 17] (DFT) calculations have been performed with PBE[48] exchange-correlation functional including SOC using a plane-wave basis set and projector augmented wave method[49], as implemented in the Vienna Ab-initio Simulation Package[50, 51] (VASP). We use a kinetic energy cutoff of 300 eV, -centered Monkhorst-Pack[52] -mesh, and a Gaussian smearing of 0.05 eV. The ionic positions and unit cell vectors are fully relaxed with the remaining absolute force on each atom being less than eV/Å. The DFT-calculated lattice parameters with PBE+SOC are within of the experimental data, showing good agreement (see Supplementary Table 1). Phonon band dispersions have been calculated with finite difference method using PHONOPY[53] on a supercell of the conventional cell with 360 atoms on the -mesh of . To calculate susceptibility functions efficiently, maximally localized Wannier functions (MLWF)[46, 47] and the tight-binding model have been constructed to reproduce closely the band structure within eV of the Fermi level by using Group II and Group III orbitals. The susceptibility functions in Eqn. (1) and (2) have been calculated with four bands, two valence and two conduction bands, around the E on the dense and -mesh using the MLWFs, where the Fermi-Dirac distribution is sampled at the temperature of 100 K and the Delta functions are approximated with Gaussian functions with a smearing of 0.02 eV. The surface spectral functions have been calculated with the surface Green’s function methods[54, 55] as implemented in WannierTools[56]. Electron-phonon coupling (EPC) interaction has been calculated with density functional perturbative theory (DFPT) as implemented in Quantum Espresso[57] (QE) using ultra-soft pseudopotentials with a kinetic energy cutoff of 50 Ry, a -mesh and -mesh with different smearing. In Supplementary Figure 3 we show the convergence of calculated phonon band dispersions of SrAl with respect to increased -mesh to and -mesh to in QE using DFPT and also a larger supercell of of the conventional cell with 640 atoms and increased -mesh in VASP using the finite displacement method with PHONOPY. The second-order elastic properties have been calculated using the stress-strain methodology[58, 59]. The crystal structures and electron charge density difference have been visualized with VESTA[60].
Data Availability: The data that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgements
The susceptibility function calculations in this work at Ames National Laboratory were supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division. Topological band structure analysis was supported by the Center for the Advancement of Topological Semimetals, an Energy Frontier Research Center funded by the U.S. Department of Energy Office of Science, Office of Basic Energy Sciences through the Ames National Laboratory under its Contract No. DE-AC02-07CH11358. Electron-phonon coupling calculations were supported by the Ames National Laboratory LDRD. The Ames National Laboratory is operated for the U.S. Department of Energy by Iowa State University under Contract No. DE-AC02-07CH11358.
Author Contributions: P.C.C. and L.-L.W. conceived and designed the work. L.-L.W. designed and performed the ab initio calculations on susceptibility functions and topological band structure analysis. L.-L.W. and N.K.N. performed electron-phonon coupling and elastic calculations. All authors discussed the results and contributed to the final manuscript.
Competing Interests: The authors declare no competing interests.

Figure 3. Electronic band structure and Fermi surface of the other three alkali earth compounds. For the electronic band structure of (a) BaAl, (b) SrGa and (c) BaGa, the highest valence and lowest conduction bands are in blue and red, respectively. For the 3D Fermi surface (FS) of (d) BaAl, (e) SrGa and (f) BaGa, it consists of valence (yellow outside and blue inside) and conduction bands (purple outside and green inside) from the side-view.
| Bulk modulus (B) (GPa) | 52.9 | 50.6 | 57.1 |
| Shear modulus (G) (GPa) | 29.1 | 36.8 | 33.9 |
| Poisson ratio () | 0.268 | 0.207 | 0.252 |
Table 1. Calculated elastic properties of , and in density functional theory (DFT).
| (\AA) | (\AA) | - (\AA) | - (\AA) | |||
| Expt[1] | 4.461 | 11.209 | 0.3841 | 2.598 | 2.690 | |
| PBE+SOC | 4.456 | 11.250 | 0.3838 | 2.616 | 2.688 | |
| (%) | −0.11 | +0.37 | −0.08 | +0.69 | −0.07 | |
| Expt[2] | 4.566 | 11.250 | 0.3800 | 2.700 | 2.711 | |
| PBE+SOC | 4.562 | 11.326 | 0.3812 | 2.691 | 2.722 | |
| (%) | −0.09 | +0.68 | +0.32 | −0.33 | +0.41 | |
| Expt[3] | 4.402 | 11.163 | 0.380 | 2.679 | 2.636 | |
| PBE+SOC | 4.380 | 11.186 | 0.3853 | 2.565 | 2.662 | |
| (%) | −0.50 | +0.21 | +1.39 | −4.26 | +0.99 | |
| Expt[4] | 4.4474 | 10.7300 | 0.38299 | 2.511 | 2.642 | |
| PBE+SOC | 4.502 | 10.807 | 0.3822 | 2.546 | 2.666 | |
| (%) | +1.22 | +0.72 | −0.21 | +1.39 | +0.91 | |
| Expt[5] | 4.5661 | 10.7780 | 0.3799 | 2.589 | 2.678 | |
| PBE+SOC | 4.621 | 10.835 | 0.3788 | 2.627 | 2.699 | |
| (%) | +1.20 | +0.53 | −0.29 | +1.47 | +0.78 |
Table 1. Fully relaxed lattice parameters and the distances between different sites (- and -) for all the five compounds in comparison to the experimental data. The relaxations are performed in PBE exchange-correlation functional with spin-orbit coupling (SOC).

Figure 3 (PDF p. 29). The convergence of calculated phonon band dispersions of . (a-d) The phonon calculated in QE using DFPT with respect to increasing -mesh and -mesh as labeled. (e-f) The phonon calculated in VASP using the finite displacement method with increasing -mesh as labeled for a large supercell of with 640 atoms. All the calculated phonon bands show the imaginary transverse acoustic mode at the small -vector along the -Z direction, as discussed in the main text.
Supplementary References
S. Gobel, M. Somer, W. Carrillo-Cabrera, E.-M. Peters, K. Peters, H. G. von Schnering, Crystal structure of strontium tetraaluminium, . 211, 189–189 (1996).
F. A. Ainutdinov, S. K. Khairidinov, A. V. Vakhobov, Phase diagram of the system aluminum-barium-nickel. Dokl. Akad. Nauk Tadzh. SSR 30, 169–172 (1987).
T. I. Yamson, M. B. Manyako, O. S. Zarechnyuk, Features of component interaction in the ternary (Ca, Eu, Sr)-Cu-Al systems. Russ. Metall., 161–165 (1992).
P. H. Tobash, Y. Yamasaki, S. Bobev, Strontium tetragallide. Acta Crystallographica Section E 61, i174–i176 (2005).
X. Sun, G. Lu, L. Chen, R. Ling, X-ray powder diffraction structure analysis. Hangzhou Daxue Xuebao, Ziran Kexueban 18, 55–59 (1987).
References
- [1]X.-L. Qi, T. L. Hughes, S.-C. Zhang, Topological invariants for the Fermi surface of a time-reversal-invariant superconductor. Phys Rev B 81, 134508 (2010).DOI
- [2]Y. Li, F. D. M. Haldane, Topological Nodal Cooper Pairing in Doped Weyl Metals. Phys Rev Lett 120, 067003 (2018).DOI
- [3]Z. Wang, S.-C. Zhang, Chiral anomaly, charge density waves, and axion strings from Weyl semimetals. Phys Rev B 87, 161107 (2013).DOI
- [4]E. Bobrow, C. Sun, Y. Li, Monopole charge density wave states in Weyl semimetals. Physical Review Research 2, 012078 (2020).DOI
- [5]J. Gooth, B. Bradlyn, S. Honnali, C. Schindler, N. Kumar, J. Noky, Y. Qi, C. Shekhar, Y. Sun, Z. Wang, B. A. Bernevig, C. Felser, Axionic charge-density wave in the Weyl semimetal (TaSe4)2I. Nature 575, 315-319 (2019).
- [6]W. Shi, B. J. Wieder, H. L. Meyerheim, Y. Sun, Y. Zhang, Y. Li, L. Shen, Y. Qi, L. Yang, J. Jena, P. Werner, K. Koepernik, S. Parkin, Y. Chen, C. Felser, B. A. Bernevig, Z. Wang, A charge-density-wave topological semimetal. Nat Phys 17, 381-387 (2021).DOI
- [7]J. Gaudet, H.-Y. Yang, S. Baidya, B. Lu, G. Xu, Y. Zhao, J. A. Rodriguez-Rivera, C. M. Hoffmann, D. E. Graf, D. H. Torchinsky, P. Nikolić, D. Vanderbilt, F. Tafti, C. L. Broholm, Weyl-mediated helical magnetism in NdAlSi. Nat Mater 20, 1650-1656 (2021).DOI
- [8]G. Li, H. Yang, P. Jiang, C. Wang, Q. Cheng, S. Tian, G. Han, C. Shen, X. Lin, H. Lei, W. Ji, Z. Wang, H.-J. Gao, Chirality locking charge density waves in a chiral crystal. Nat Commun 13, 2914 (2022).DOI
- [9]Z. Rao, Q. Hu, S. Tian, Q. Qu, C. Chen, S. Gao, Z. Yuan, C. Tang, W. Fan, J. Huang, Y. Huang, L. Wang, L. Zhang, F. Li, K. Wang, H. Yang, H. Weng, T. Qian, J. Xu, K. Jiang, H. Lei, Y.-J. Sun, H. Ding, Charge instability of topological Fermi arcs in chiral crystal CoSi. Science Bulletin in press, (2023).DOI
- [10]S. Lei, S. M. L. Teicher, A. Topp, K. Cai, J. Lin, G. Cheng, T. H. Salters, F. Rodolakis, J. J. McChesney, S. Lapidus, N. Yao, M. Krivenkov, D. Marchenko, A. Varykhalov, C. R. Ast, R. Car, J. Cano, M. G. Vergniory, N. P. Ong, L. M. Schoop, Band Engineering of Dirac Semimetals Using Charge Density Waves. Advanced Materials 33, 2101591 (2021).DOI
- [11]G. Grimvall, The Electron-Phonon Interaction in Metals. (North-Holland, Amsterdam, 1981).
- [12]F. Giustino, Electron-phonon interactions from first principles. Rev Mod Phys 89, 015003 (2017).DOI
- [13]R. E. Peierls, Quantum Theory of Solids. (Oxford University Press, New York, 1955).
- [14]M. D. Johannes, I. I. Mazin, Fermi surface nesting and the origin of charge density waves in metals. Phys Rev B 77, 165135 (2008).DOI
- [15]X. Zhu, Y. Cao, J. Zhang, E. W. Plummer, J. Guo, Classification of charge density waves based on their nature. Proceedings of the National Academy of Sciences 112, 2367-2371 (2015).DOI
- [16]P. Hohenberg, W. Kohn, Inhomogeneous Electron Gas. Phys. Rev. 136, B864-B871 (1964).
- [17]W. Kohn, L. J. Sham, Self-Consistent Equations Including Exchange and Correlation Effects. Phys. Rev. 140, A1133-A1138 (1965).DOI
- [18]M. Calandra, I. I. Mazin, F. Mauri, Effect of dimensionality on the charge-density wave in few-layer 2H-NbSe₂. Phys Rev B 80, 241108 (2009).DOI
- [19]M. D. Johannes, I. I. Mazin, C. A. Howells, Fermi-surface nesting and the origin of the charge-density wave in NbSe₂. Phys Rev B 73, 205102 (2006).
- [20]F. Weber, S. Rosenkranz, J. P. Castellan, R. Osborn, R. Hott, R. Heid, K. P. Bohnen, T. Egami, A. H. Said, D. Reznik, Extended Phonon Collapse and the Origin of the Charge-Density Wave in 2H-NbSe₂. Phys Rev Lett 107, 107403 (2011).pubmed.ncbi.nlm.nih.gov/21981528
- [21]T. Valla, A. V. Fedorov, P. D. Johnson, P. A. Glans, C. McGuinness, K. E. Smith, E. Y. Andrei, H. Berger, Quasiparticle Spectra, Charge-Density Waves, Superconductivity, and Electron-Phonon Coupling in 2H-NbSe₂. Phys Rev Lett 92, 086401 (2004).pubmed.ncbi.nlm.nih.gov/14995798
- [22]K. Wang, R. Mori, Z. Wang, L. Wang, J. H. S. Ma, D. W. Latzke, D. E. Graf, J. D. Denlinger, D. Campbell, B. A. Bernevig, A. Lanzara, J. Paglione, Crystalline symmetry-protected non-trivial topology in prototype compound BaAl4. Npj Quantum Mater 6, 28 (2021).DOI
- [23]G. J. Miller, F. Li, H. F. Franzen, The structural phase transition in calcium-aluminum compound (CaAl4): a concerted application of Landau theory and energy band theory. J. Am. Chem. Soc. 115, 3739-3745 (1993).DOI
- [24]A. Nakamura, T. Uejo, H. Harima, S. Araki, T. C. Kobayashi, M. Nakashima, Y. Amako, M. Hedo, T. Nakama, Y. Ōnuki, Characteristic Fermi surfaces and charge density wave in SrAl4 and related compounds with the BaAl4-type tetragonal structure. J Alloy Compd 654, 290-299 (2016).
- [25]S. Araki, Y. Ikeda, T. C. Kobayashi, A. Nakamura, Y. Hiranaka, M. Hedo, T. Nakama, Y. Ōnuki, Charge Density Wave Transition in EuAl4. J Phys Soc Jpn 83, 015001 (2014).DOI
- [26]S. Shimomura, H. Murao, S. Tsutsui, H. Nakao, A. Nakamura, M. Hedo, T. Nakama, Y. Ōnuki, Lattice Modulation and Structural Phase Transition in the Antiferromagnet EuAl4. J Phys Soc Jpn 88, 014602 (2019).
- [27]K. Kaneko, T. Kawasaki, A. Nakamura, K. Munakata, A. Nakao, T. Hanashima, R. Kiyanagi, T. Ohhara, M. Hedo, T. Nakama, Y. Ōnuki, Charge-Density-Wave Order and Multiple Magnetic Transitions in Divalent Europium Compound EuAl4. J Phys Soc Jpn 90, 064704 (2021).
- [28]S. Ramakrishnan, S. R. Kotla, T. Rekis, J.-K. Bao, C. Eisele, L. Noohinejad, M. Tolkiehn, C. Paulmann, B. Singh, R. Verma, B. Bag, R. Kulkarni, A. Thamizhavel, B. Singh, S. Ramakrishnan, S. van Smaalen, Orthorhombic charge density wave on the tetragonal lattice of EuAl4. IUCrJ 9, 378-385 (2022).DOI
- [29]A. Nakamura, T. Uejo, F. Honda, T. Takeuchi, H. Harima, E. Yamamoto, Y. Haga, K. Matsubayashi, Y. Uwatoko, M. Hedo, T. Nakama, Y. Ōnuki, Transport and Magnetic Properties of EuAl4 and EuGa4. J Phys Soc Jpn 84, 124711 (2015).
- [30]R. Takagi, N. Matsuyama, V. Ukleev, L. Yu, J. S. White, S. Francoual, J. R. L. Mardegan, S. Hayami, H. Saito, K. Kaneko, K. Ohishi, Y. Ōnuki, T.-h. Arima, Y. Tokura, T. Nakajima, S. Seki, Square and rhombic lattices of magnetic skyrmions in a centrosymmetric binary compound. Nat Commun 13, 1472 (2022).DOI
- [31]J. M. Moya, S. Lei, E. M. Clements, C. S. Kengle, S. Sun, K. Allen, Q. Li, Y. Y. Peng, A. A. Husain, M. Mitrano, M. J. Krogstad, R. Osborn, A. B. Puthirath, S. Chi, L. Debeer-Schmitt, J. Gaudet, P. Abbamonte, J. W. Lynn, E. Morosan, Incommensurate magnetic orders and topological Hall effect in the square-net centrosymmetric EuGa2Al2 system. Physical Review Materials 6, 074201 (2022).DOI
- [32]W. R. Meier, J. R. Torres, R. P. Hermann, J. Zhao, B. Lavina, B. C. Sales, A. F. May, Thermodynamic insights into the intricate magnetic phase diagram of EuAl4. Phys Rev B 106, 094421 (2022).DOI
- [33]T. Shang, Y. Xu, D. J. Gawryluk, J. Z. Ma, T. Shiroka, M. Shi, E. Pomjakushina, Anomalous Hall resistivity and possible topological Hall effect in the EuAl4 antiferromagnet. Phys Rev B 103, L020405 (2021).DOI
- [34]X. Y. Zhu, H. Zhang, D. J. Gawryluk, Z. X. Zhen, B. C. Yu, S. L. Ju, W. Xie, D. M. Jiang, W. J. Cheng, Y. Xu, M. Shi, E. Pomjakushina, Q. F. Zhan, T. Shiroka, T. Shang, Spin order and fluctuations in the EuAl4 and EuGa4 topological antiferromagnets: A muSR study. Phys Rev B 105, 014423 (2022).DOI
- [35]M. Gen, R. Takagi, Y. Watanabe, S. Kitou, H. Sagayama, N. Matsuyama, Y. Kohama, A. Ikeda, Y. Ōnuki, T. Kurumaji, T.-h. Arima, S. Seki, Rhombic skyrmion lattice coupled with orthorhombic structural distortion in EuAl4. Phys Rev B 107, L020410 (2023).DOI
- [36]S. Baroni, S. de Gironcoli, A. Dal Corso, P. Giannozzi, Phonons and related crystal properties from density-functional perturbation theory. Rev Mod Phys 73, 515-562 (2001).DOI
- [37]L. M. Schoop, M. N. Ali, C. Strasser, A. Topp, A. Varykhalov, D. Marchenko, V. Duppel, S. S. P. Parkin, B. V. Lotsch, C. R. Ast, Dirac cone protected by non-symmorphic symmetry and three-dimensional Dirac line node in ZrSiS. Nat Commun 7, 11696 (2016).DOI
- [38]M. G. Vergniory, L. Elcoro, C. Felser, N. Regnault, B. A. Bernevig, Z. J. Wang, A complete catalogue of high-quality topological materials. Nature 566, 480-485 (2019).DOI
- [39]M. G. Vergniory, B. J. Wieder, L. Elcoro, S. S. P. Parkin, C. Felser, B. A. Bernevig, N. Regnault, All topological bands of all nonmagnetic stoichiometric materials. Science 376, eabg9094 (2022).DOI
- [40]B. J. Yang, N. Nagaosa, Classification of stable three-dimensional Dirac semimetals with nontrivial topology. Nat Commun 5, 4898 (2014).DOI
- [41]H. C. Po, A. Vishwanath, H. Watanabe, Symmetry-based indicators of band topology in the 230 space groups (vol 8, 50, 2017). Nat Commun 8, 50 (2017).
- [42]R. J. Slager, A. Mesaros, V. Juricic, J. Zaanen, The space group classification of topological band-insulators. Nat Phys 9, 98-102 (2013).
- [43]J. Kruthoff, J. de Boer, J. Van Wezel, C. L. Kane, R.-J. Slager, Topological Classification of Crystalline Insulators through Band Structure Combinatorics. Phys Rev X 7, 041069 (2017).DOI
- [44]Z. D. Song, T. T. Zhang, Z. Fang, C. Fang, Quantitative mappings between symmetry and topology in solids. Nat Commun 9, 3530 (2018).DOI
- [45]B. Bradlyn, L. Elcoro, J. Cano, M. G. Vergniory, Z. J. Wang, C. Felser, M. I. Aroyo, B. A. Bernevig, Topological quantum chemistry. Nature 547, 298-305 (2017).
- [46]N. Marzari, D. Vanderbilt, Maximally localized generalized Wannier functions for composite energy bands. Phys Rev B 56, 12847-12865 (1997).DOI
- [47]I. Souza, N. Marzari, D. Vanderbilt, Maximally localized Wannier functions for entangled energy bands. Phys Rev B 65, 035109 (2001).DOI
- [48]J. P. Perdew, K. Burke, M. Ernzerhof, Generalized gradient approximation made simple. Phys Rev Lett 77, 3865-3868 (1996).pubmed.ncbi.nlm.nih.gov/10062328
- [49]P. E. Blöchl, Projector Augmented-Wave Method. Phys Rev B 50, 17953-17979 (1994).pubmed.ncbi.nlm.nih.gov/9976227
- [50]G. Kresse, J. Furthmuller, Efficiency of Ab-initio Total Energy Calculations for Metals and Semiconductors Using a Plane-Wave Basis Set. Comp Mater Sci 6, 15-50 (1996).DOI
- [51]G. Kresse, J. Furthmuller, Efficient Iterative Schemes for Ab initio Total-Energy Calculations Using a Plane-Wave Basis Set. Phys Rev B 54, 11169-11186 (1996).pubmed.ncbi.nlm.nih.gov/9984901
- [52]H. J. Monkhorst, J. D. Pack, Special Points for Brillouin-Zone Integrations. Phys Rev B 13, 5188-5192 (1976).DOI
- [53]A. Togo, I. Tanaka, First principles phonon calculations in materials science. Scripta Materialia 108, 1-5 (2015).arxiv.org/abs/1506.08498
- [54]M. P. L. Sancho, J. M. L. Sancho, J. Rubio, Quick Iterative Scheme for the Calculation of Transfer-Matrices - Application to Mo(100). J Phys F Met Phys 14, 1205-1215 (1984).
- [55]M. P. L. Sancho, J. M. L. Sancho, J. Rubio, Highly Convergent Schemes for the Calculation of Bulk and Surface Green-Functions. J Phys F Met Phys 15, 851-858 (1985).
- [56]Q. Wu, S. Zhang, H.-F. Song, M. Troyer, A. A. Soluyanov, WannierTools: An open-source software package for novel topological materials. Computer Physics Communications 224, 405-416 (2018).
- [57]P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G. L. Chiarotti, M. Cococcioni, I. Dabo, A. Dal Corso, S. de Gironcoli, S. Fabris, G. Fratesi, R. Gebauer, U. Gerstmann, C. Gougoussis, A. Kokalj, M. Lazzeri, L. Martin-Samos, N. Marzari, F. Mauri, R. Mazzarello, S. Paolini, A. Pasquarello, L. Paulatto, C. Sbraccia, S. Scandolo, G. Sclauzero, A. P. Seitsonen, A. Smogunov, P. Umari, R. M. Wentzcovitch, QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials. J Phys-Condens Mat 21, 395502 (2009).DOI
- [58]M. de Jong, W. Chen, T. Angsten, A. Jain, R. Notestine, A. Gamst, M. Sluiter, C. Krishna Ande, S. van der Zwaag, J. J. Plata, C. Toher, S. Curtarolo, G. Ceder, K. A. Persson, M. Asta, Charting the geometric elastic properties of inorganic crystalline compounds. Scientific Data 2, 150009 (2015).
- [59]R. Golesorkhtabar, P. Pavone, J. Spitaler, P. Puschnig, C. Draxl, ElaStic: A tool for calculating second-order elastic constants from first principles. Computer Physics Communications 184, 1861-1873 (2013).DOI
- [60]K. Momma, F. Izumi, VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data. Journal of Applied Crystallography 44, 1272-1276 (2011).DOI