WorksPhysics and Astronomy
Strong and tunable magnetoelectric coupling in 2D trilayer heterostructures
Abstract
The quest for electric-field control of nanoscale magnetic states such as skyrmions, which would impact the field of spintronics, has led to a challenging search for multiferroic materials or structures with strong magnetoelectric coupling and efficient electric-field control. Here we report a theoretical prediction that such phenomena can be realized in two-dimensional (2D) bilayer FE/PMM and trilayer FE/PMM/FE heterostructures (two-terminal and three-terminal devices), where FE is a 2D ferroelectric and PMM is a polar magnetic metal with strong spin-orbit coupling. Such a PMM has strong Dzyaloshinskii-Moriya interactions (DMI) that can generate skyrmions, while the FE can generate strong magnetoelectric coupling through polarization-polarization interactions. In trilayer heterostructures, contact to the metallic PMM layer enables multiple polarization configurations for electric-field control of skyrmions. We report density-functional-theory calculations for particular material choices that demonstrate the effectiveness of these arrangements, with the key driver being the polarization-polarization interactions between the PMM and FE layers. The present findings provide a method to achieve strong magnetoelectric coupling in the 2D limit and a new perspective for the design of related spintronics.
spintronics.
Topologically protected, noncollinear nanoscale spin textures in magnetic materials, e.g., magnetic skyrmions, bimerons, etc., hold promise for applications in next-generation data-storage devices and spintronics[1, 2, 3]. The utility of such magnetic structures would be enhanced significantly if they can be generated or manipulated by applied electric fields. Thus, one must identify multiferroic materials or heterostructures that feature magnetic properties favoring noncollinear magnetism, ferroelectricity (FE), and strong magnetoelectric coupling, i.e., large or .
In magnetic materials, the ratio of Dzyaloshinskii-Moriya interaction (DMI) and the exchange integral controls the magnetic ordering – large produces collinear ferromagnetism or antiferromagnetism, while large DMI produces noncollinear orderings. In order to have large DMI, it is necessary for the magnetic material to lack inversion symmetry and have strong spin-orbit coupling (SOC)[4, 5]. Thus, magnetic skyrmions and bimerons are usually observed in magnets without inversion symmetry[6, 7, 8, 9, 10] and noncentrosymmetric thin-film heterostructures comprising a ferromagnetic (FM) metal film and one or more heavy-metal (HM) films, e.g., Pt/Co/MgO and Pt/Co/Ir[11, 12, 13].
It follows that a targeted optimal FM/FE multiferroic system must feature large DMI (noncentrosymmetry, large SOC) and strong magnetoelectric coupling. One would expect that all these conditions might be satisfied in a single FM/FE multiferroic material and magnetoelectric coupling would be strong because the FM/FE properties would be intimately linked. So far, control of polarization by magnetic field has been achieved in bulk multiferroics[14, 15, 16], however, control of magnetism by electric fields has not proved to be very practical in bulk multiferroics[17, 18, 19]. In 2018, magnetoelectric coupling was demonstrated in a FE/FM heterostructure of perovskite-structure transition-metal oxides, namely BaTiO/SrRuO (BTO/SRO)[20]. Magnetoelectric coupling is achieved by electric-field-controlled polarization reversal in the FE material. We note, however, that the magnetic material, SRO, is centrosymmetric, whereby nonzero DMI is generated only by the breaking of inversion symmetry by the presence of BTO. As a result, the induced DMI values in SRO are quite small, ranging from zero to 1.25 meV and from zero to 0.6 meV in the SRO layer in the two polarization directions. Additionally, the corresponding small DMI changes induced by polarization reversal indicate relatively weak magnetoelectric coupling.
The recent discovery of two-dimensional (2D) FM[21, 22, 23] and FE[24, 25, 26, 27, 28] materials triggered interest in 2D FM/FE heterostructures for skyrmion generation and manipulation. Several theoretical papers have predicted the possibility of generating and annihilating skyrmions or bimerons in such 2D heterostructures[29, 30, 31]. Once more, however, we note that, as in the BTO/SRO thin-film heterostructure, the FM materials in the studied 2D heterostructures are centrosymmetric, resulting in DMI values that are meV in both polarization directions.
In the present work we overcome the above limitations and design optimal bilayer and trilayer heterostructures exhibiting strong and, in the trilayer, tunable magnetoelectric coupling for the manipulation of skyrmions and other noncollinear spin structures. We first identify 2D materials that satisfy the aforementioned criteria for large DMI [noncentrosymmetric (polar) FM 2D materials that also have strong SOC, i.e., contain heavy elements], which are needed for the generation of stable noncollinear spin structures. We then combine a polar 2D FM material and a 2D FE material to construct 2D FM/FE bilayer and FE/FM/FE trilayer heterostructures. In such structures, strong magnetoelectric coupling would arise via polarization-polarization interactions between the polar-FM and FE materials, causing large changes of magnetic parameters, i.e., , , etc., during FE polarization reversal. Additionally, for the 2D FM material, a metallic one is more desirable as it can function as an electrode in a FE/FM/FE trilayer heterostructure, enabling multiple polarization configurations, i.e., tuning the magnetoelectric strength. Polar metals were theoretically proposed in 1965 by Anderson and Blount[33], but the first realization of polar metals was reported in 2013[32], and they remain relatively rare. Magnetic 2D materials were first reported in 2017 and also remain relatively rare[21, 22, 23]. In 2020, two 2D materials were reported that meet the desired criteria: The Janus transition-metal dichalcogenides MnSTe and MnSeTe are stable metallic polar 2D magnetic metals with large SOC and, as expected, they have been predicted to have large DMI values and skyrmions[34, 35]. We, therefore, propose bilayer MnSeTe/InSe heterostructures, where monolayer InSe is the 2D FE material, and trilayer InSe/MnSeTe/InSe heterostructures, which can form the core of a three-terminal device. MnSeTe is selected to construct heterostructures because MnSe has been fabricated[36], whereby the Janus is likely to be fabricated. Single-phase FE has been fabricated in multilayer form[25, 37, 38]. We perform calculations using a single quintuple layer for computational convenience, but multilayers would work just as well, or perhaps even better by providing tunability of the polarization in the FE layer in heterostructure. We employ DFT calculations to demonstrate that strong magnetoelectric coupling is indeed achieved in the proposed heterostructures. In the trilayer heterostructure, we also find that through the combination of multiple polarization states, both tunable magnetoelectric coupling and control of the magnetic-skyrmion evolution in can be achieved. The present findings provide a method to achieve strong magnetoelectric coupling in the 2D limit, as well as a new perspective for the design of related spintronics.
We first describe briefly how to characterize the expected properties exhibited in a MnSeTe/InSe heterostructure, i.e., strong magnetoelectric coupling and FE polarization-controlled skyrmion evolution, through computational approaches. To demonstrate the strong magnetoelectric coupling in such heterostructures, we compare the polarization-reversal-induced changes of the magnetic parameters, including changes of the DMI parameter , Heisenberg isotropic exchange parameters , and magnetic-anisotropy energy (), to the corresponding changes in a bilayer heterostructure composed of FE and nonpolar-FM 2D materials, as shown schematically in Figure 1(a). Larger changes of magnetic parameters are expected in heterostructure if magnetoelectric coupling in is stronger. Additionally, the state of skyrmions, including the formation of skyrmions and skyrmion densities, can be described by the ratio between DMI and exchange parameters [39]. Thus, as shown in Figure 1(b), the FE polarization-controlled skyrmion evolution can be characterized by comparing the before and after polarization reversal. Other magnetic interactions, e.g., anisotropic exchange interaction, are not discussed here since the such interactions in MnSeTe are one order of magnitude smaller than DMI and [34, 35].
Figure 1. Magnetoelectric coupling in MnSeTe/InSe heterostructure. Schematic illustration of (a) a polar-FM/FE heterostructure (left), in which there exists a strong polarization-polarization interaction, and a nonpolar-FM/FE heterostructure (right), in which the polarization of InSe interacts only with very small induced polarization in the nonpolar-FM layer; and (b) the effect of polarization reversal in the InSe layer on a skyrmion in the polar-FM layer. (c) Possible configurations of the MnSeTe/InSe heterostructure. The − and + signs represent the polarization directions. (d)–(f) The DMI parameter , exchange parameter , and magnetic-anisotropy energy () of MnSeTe in the heterostructure. Te/Se and Se/Se represent the interface of the heterostructure.
Given the above framework, we calculated the magnetic parameters of in a heterostructure to check whether interlayer magnetoelectric coupling is established between and . Considering the combinations of the polarizations of and , there are total of four possible atomic configurations of heterostructure classified into 2 types: one possesses a Te/Se interface and the other possesses a Se/Se interface, as shown in Figure 1(c). These four configurations are named FM−/FE−, FM−/FE+, FM+/FE− and FM+/FE+, in which the signs − and + denote the polarization directions. The calculated magnetic parameters , and of in the two distinct heterostructures are shown in Figure 1(d)–(Figure 1f). Evidently, the strengths of , , and are modulated when reversing the FE polarization of the layer (from red bars to blue bars or the reverse), proving the existence of the interlayer magnetoelectric coupling in the heterostructure.
To examine the strength of the magnetoelectric coupling, we further compare the modulation amplitudes of , and of MnSeTe/InSe to the corresponding values of some reported nonpolar-FM/FE systems, as listed in Table 1. The MnSeTe/InSe heterostructures show significantly enhanced modulation of the magnetic parameters. For example, in a MnSeTe/InSe heterostructure with Te/Se interface, the modulation amplitude of DMI parameters, , is nearly six times larger than that of the CrGeTe/InSe heterostructure, as summarized in Table 1, indicating that the magnetoelectric coupling in the MnSeTe/InSe heterostructure is significantly stronger. The key difference between the present and the reported system is that, the FM layer in our system, MnSeTe, is polar. Thus, the stronger magnetoelectric coupling could be attributed to the polarization-polarization interactions between MnSeTe and InSe.
| Present results: MnSeTe/InSe | Present results: InSe/MnSeTe/InSe | MnBiTe/InSe[40] | CrGeTe/InSe[29, 41] | LaCl/InSe[30] | WTe/CrCl/CuInPS[31] | |
| (meV) | 0.84 (Te/Se)<br>0.53 (Se/Se) | 1.25 ( to ) | No report | 0.14 | 0.35<br> 0.36<br> 0.53 | 0.04 |
| (meV) | 2.32 (Te/Se)<br>1.78 (Se/Se) | 3.01 ( to ) | 0.6 | 0.62 | 1.94<br> 2.39<br> 3.36 | 1.81 |
| (meV) | 0.63 (Te/Se)<br>0.18 (Se/Se) | 0.66 ( to ) | 0.1 | 0.17 | No report | 0.13 |
| 0.39 (, Te/Se)<br>0.26 (, Te/Se) | 0.22 ()<br>0.17 ()<br>0.31 ()<br>0.25 () | No report | 0.017 ()<br>0.023 () | 0.43 ()<br>0.07 ()<br> 0.09 ()<br>0.07 ()<br> 0.10 ()<br>0.06 () | 0.07 ()<br>0.04 () |
Table 1. Comparison between the changes of DMI parameters , exchange parameters , magnetic-anisotropy energy and ratio of the present system and those in reported nonpolar-FM/FE heterostructures when the polarization of the FE layer is reversed. In the present results for the trilayer heterostructure, we list only the largest change values of , and among all possible transitions (see Figure 2). Arrows represent the FE polarization directions.
Given that the emergence and evolution of magnetic skyrmions mainly relies on the competition between the DMI, which tilt spins, and exchange interactions, which align spins, the enhanced and suppressed during FE polarization reversal (as shown in Figure 1(d)-(Figure 1e), red bars to blue bars) indicate the possibility of controlling skyrmions in the MnSeTe/InSe heterostructure, i.e., controlling the density or the creation (elimination) of skyrmions. Here we note that, for a MnSeTe/InSe heterostructure with Se/Se interface, the DMI enhancement refers to the absolute values of getting larger, since the sign of represents only the spin whirling direction. We note that, as shown in Figure 1(d)-(Figure 1f), the values of are quite small relative to the values of and , which are the main controllers of magnetic ordering. Furthermore, the value of is to be compared with the value of to consider the effect of on the formation of skyrmions1. Overall, the values are quite small and do not play a significant role in the processes of interest.
To further characterize the evolution of skyrmions, we calculate the ratio, as summarized in Table 1. The ratios of the MnSeTe/InSe heterostructure are in the typical range for skyrmion formation (~0.1-0.3)[39] and comparable to that of freestanding MnSeTe monolayer (0.34)[35], indicating skyrmions also exist in the heterostructure. Comparing to the reported nonpolar-FM/FE heterostructure[29, 30, 31, 40, 41], the present system exhibits both large and as shown in Table 1 and Table S4, which benefits the formation and stabilization of skyrmions. Further, the polarization-reversal-induced change of , namely 0.39−0.26=0.13, is also much larger in MnSeTe/InSe than that in the other reported nonpolar-FM/FE heterostructures (Table 1), which is a direct consequence of the strong magnetoelectric coupling. As a result of these large numbers, in the MnSeTe/InSe heterostructure, formation of skyrmions can be achieved by applying an external magnetic field. At the same time, in the presence of a specific magnetic field, FE polarization reversal, which induces a change ±0.13, can change the density and size of the skyrmions, but, depending on the value of the magnetic field, can also eliminate or create skyrmions. The latter can happen because the critical value of the magnetic field to create skyrmions depends on the value of .
Based on the bilayer MnSeTe/ heterostructure, we further built a trilayer heterostructure /MnSeTe/. Given that MnSeTe in the trilayer heterostructure is metallic, a three-terminal device can be formed by contacting metal electrodes on the surface of the top and bottom layers and a third electrode on the metallic MnSeTe interlayer, which allows multiple configurations of the FE polarizations of the two layers. The several combinations of the polarizations of the top and bottom layers allow tunable and stronger magnetoelectric coupling compared to the bilayer case, as well as multi-state control of skyrmions, as we shall now demonstrate. Intuitively, there are eight different polarization configurations of the trilayer heterostructure, but for every specific polarization combination (e.g., ↑↑↑), there is an equivalent one (e.g., ↓↓↓), finally leading to only four possible configurations, as shown in Figure 2(a). The , and of MnSeTe in the four different InSe/MnSeTe/InSe heterostructure configurations are shown in Figure 2(b)-(Figure 2d), respectively. We list the largest values of and in Table 1, indicating that the modulation amplitudes of the trilayer heterostructures can be significantly larger than what can be obtained by bilayer heterostructures. In addition, , , and also exhibit different values for different combinations of the FE polarizations, demonstrating the magnetoelectric coupling is also tunable in the trilayer heterostructure. Moreover, as shown in Figure 2(b) and 2(c), the opposite sings of and during the polarization-reversal process indicate that magnetic skyrmions can be modulated via multiple polarization states, which is further evidenced by the four different ratios ranging from 0.17 to 0.31, as shown in Table 1.
Figure 2. The modulation of magnetic parameters of MnSeTe in an /MnSeTe/ heterostructure through the polarization reversal of . (a) Possible configurations of the MnSeTe/ heterostructure. (b)–(d) The absolute values of the DMI parameters , exchange parameters, and magnetic-anisotropy energies () of MnSeTe in the four possible heterostructures.
Finally, we discuss the role of the polarization-polarization (P-P) interactions in the strong magnetoelectric coupling. In the heterostructure, both and possess intrinsic polarizations. The polarization of is enhanced or suppressed when the FE polarization is reversed due to P-P interactions, which modify the degree of inversion-symmetry breaking in and the strength of associated magnetic interactions (especially DMI). Definitely, such an effect is rather weak in a nonpolar-FM/FE heterostructure. As shown in Table S1, for a heterostructure, the Mn-Se(Te)-Mn bond angle () exhibits a larger change than that of heterostructure when the FE polarization is reversed, validating that P-P interactions enhance the modification of inversion-symmetry breaking. To further check the effect of P-P interactions, we replaced the () in the bilayer heterostructure by a 2D
FM (FE) material with smaller or larger polarizations, whereby the strength of the P-P interactions can be tuned. The obtained systems, MnSe/InSe, MnSeTe/HfGeTe, MnSeTe/InSe and MnSeTe/bilayer-InSe, are named as 0P/1P, 1P/0.42P, 1P/1P and 1P/2P, respectively, according to the polarizations of FM (FE) materials relative to MnSeTe (InSe), as shown in Figure 3(a). Details of the selected materials are shown in Supplementary Material. The , and values of these heterostructures are shown in Figure 3(b)-(Figure 3d). Evidently, for the heterostructure MnSe/InSe (0P/1P) without P-P interactions, the ferroelectric-modulation of the magnetic parameters (from red dots to blue dots) is rather small, indicating the magnetoelectric coupling is weak. However, with the enhancement of the P-P interactions (from 1P/0.42P to 1P/2P), the magnetoelectric coupling between FM and FE materials is enhanced significantly. We also note that such a P-P interaction is not a pure electric-field effect, since the changes of magnetic parameters in the MnSeTe/InSe heterostructures are larger than that of MnSeTe under an electric field equivalent to the polarization of InSe, as discussed in Fig. S4. Thus, the P-P interaction is the key to achieve the enhanced magnetoelectric coupling.
Figure 3. The effects of polarization-polarization interaction on magnetoelectric coupling. (a) Atomic configurations of , and /bilayer- heterostructures, which are denoted as 0P/1P, 1P/0.42P and 1P/2P, respectively. Here mP/nP represents the polarizations of FM and FE materials relative to (1P/1P). (b)-(d) The DMI parameter , exchange parameter and magnetic anisotropic energy () of FM material in the heterostructure.
In this work, we theoretically proposed van der Waals heterostructures composed of a 2D ferromagnetic polar metal, , and a 2D ferroelectric, . The bilayer heterostructure exhibits strong magnetoelectric coupling originating from the polarization-polarization interaction between and , resulting in more efficient ferroelectric control of the magnetic interactions and skyrmions in . Furthermore, we proposed a trilayer heterostructure, , in which the magnetoelectric coupling is further enhanced and tunable. Such a trilayer heterostructure also allows manipulation of magnetic skyrmions via multiple polarization states. In addition to electrical control of the magnetic skyrmions, the strong magnetoelectric coupling in the heterostructure also enables other potential applications. For example, the exchange parameter exhibits two different values before and after FE polarization reversal, corresponding to two different Curie temperatures (named as and here). Thus, by setting the operating temperature between and , a ferromagnetic-to-paramagnetic transition in can be expected by reversing the polarization of . Within mean-field theory, a calculated change of 21% for in the heterostructure would lead to a 21% change in the Curie temperature, which would be sufficient window for a possible application of the effect. Our findings provide insights for achieving strong magnetoelectric coupling in the 2D limit, as well as a new perspective for the design of related spintronics.
Acknowledgments: Work in China was supported by the National Natural Science Foundation of China (51922011 and 61888102) and K.C.Wong Education Foundation. Work at Vanderbilt was supported by the U.S. Department of Energy, Office of Science, Division of Basic Energy Sciences, Materials Science and Engineering Directorate grant No. DE-FG-02-09ER46554 and the McMinn Endowment.
Competing interests: The authors declare no competing interests.
Data availability: Data that support the findings of this study are available from the corresponding authors upon reasonable request.
References
- [1]Fert, A.; Reyren, N.; Cros, V. Magnetic skyrmions: advances in physics and potential applications. Nat. Rev. Mater. 2017, 2 (7), 17031.DOI
- [2]Wiesendanger, R. Nanoscale magnetic skyrmions in metallic films and multilayers: a new twist for spintronics. Nat. Rev. Mater. 2016, 1 (7), 16044.DOI
- [3]Göbel, B.; Mertig, I.; Tetiakov, O. A. Beyond skyrmions: Review and perspectives of alternative magnetic quasiparticles. Phys. Rep. 2021, 895, 1.DOI
- [4]Dzyaloshinsky, I. A thermodynamic theory of “weak” ferromagnetism of antiferromagnetics. J. Phys. Chem. Solids 1958, 4 (4), 241.
- [5]Moriya, T. Anisotropic Superexchange Interaction and Weak Ferromagnetism. Phys. Rev. 1960, 120 (1), 91.
- [6]Mühlbauer, S.; Binz, B.; Jonietz, F.; Pfleiderer, C.; Rosch, A.; Neubauer, A.; Georgii, R.; Böni, P. Skyrmion Lattice in a Chiral Magnet. Science 2009, 323 (5916), 915.DOI
- [7]Jonietz, F.; Mühlbauer, S.; Pfleiderer, C.; Neubauer, A.; Münzer, W.; Bauer, A.; Adams, T.; Georgii, R.; Böni, P.; Duine, R. A.; et al. Spin Transfer Torques in MnSi at Ultralow Current Densities. Science 2010, 330 (6011), 1648.DOI
- [8]Yu, X. Z.; Koshibae, W.; Tokunaga, Y.; Shibata, K.; Taguchi, Y.; Nagaosa, N.; Tokura, Y. Transformation between meron and skyrmion topological spin textures in a chiral magnet. Nature 2018, 564 (7734), 95.DOI
- [9]Jani, H.; Lin, J.-C.; Chen, J.; Harrison, J.; Maccherozzi, F.; Schad, J.; Prakash, S.; Eom, C.-B.; Ariando, A.; Venkatesan, T.; et al. Antiferromagnetic half-skyrmions and bimerons at room temperature. Nature 2021, 590 (7844), 74.
- [10]Tokunaga, Y.; Yu, X. Z.; White, J. S.; Rønnow, H. M.; Morikawa, D.; Taguchi, Y.; Tokura, Y. A new class of chiral materials hosting magnetic skyrmions beyond room temperature. Nat. Commun. 2015, 6 (1), 7638.DOI
- [11]Boulle, O.; Vogel, J.; Yang, H.; Pizzini, S.; de Souza Chaves, D.; Locatelli, A.; Menteş, T. O.; Sala, A.; Buda-Prejbeanu, L. D.; Klein, O.; et al. Room-temperature chiral magnetic skyrmions in ultrathin magnetic nanostructures. Nat. Nanotechnol. 2016, 11 (5), 449.DOI
- [12]Moreau-Luchaire, C.; Moutafis, C.; Reyren, N.; Sampaio, J.; Vaz, C. A. F.; Van Horne, N.; Bouzehouane, K.; Garcia, K.; Deranlot, C.; Warnicke, P.; et al. Additive interfacial chiral interaction in multilayers for stabilization of small individual skyrmions at room temperature. Nat. Nanotechnol. 2016, 11 (5), 444.
- [13]Yang, H.; Thiaville, A.; Rohart, S.; Fert, A.; Chshiev, M. Anatomy of Dzyaloshinskii-Moriya Interaction at Co/Pt Interfaces. Phys. Rev. Lett. 2015, 115 (26), 267210.
- [14]Kimura, T.; Goto, T.; Shintani, H.; Ishizaka, K.; Arima, T.; Tokura, Y. Magnetic control of ferroelectric polarization. Nature 2003, 426 (6962), 55.
- [15]Ishiwata, S.; Taguchi, Y.; Murakawa, H.; Onose, Y.; Tokura, Y. Low-Magnetic-Field Control of Electric Polarization Vector in a Helimagnet. Science 2008, 319 (5870), 1643.DOI
- [16]Zhai, K.; Wu, Y.; Shen, S.; Tian, W.; Cao, H.; Chai, Y.; Chakoumakos, B. C.; Shang, D.; Yan, L.; Wang, F. ; et al. Giant magnetoelectric effects achieved by tuning spin cone symmetry in Y-type hexaferrites. Nat. Commun. 2017, 8 (1), 519.
- [17]Fiebig, M.; Lottermoser, T.; Meier, D.; Trassin, M. The evolution of multiferroics. Nat. Rev. Mater. 2016, 1 (8), 16046.
- [18]Spaldin, N. A.; Ramesh, R. Advances in magnetoelectric multiferroics. Nat. Mater. 2019, 18 (3), 203.DOI
- [19]Lu, C.; Wu, M.; Lin, L.; Liu, J.-M. Single-phase multiferroics: new materials, phenomena, and physics. Natl. Sci. Rev. 2019, 6 (4), 653.DOI
- [20]Wang, L.; Feng, Q.; Kim, Y.; Kim, R.; Lee, K. H.; Pollard, S. D.; Shin, Y. J.; Zhou, H.; Peng, W.; Lee, D. ; et al. Ferroelectrically tunable magnetic skyrmions in ultrathin oxide heterostructures. Nat. Mater. 2018, 17 (12), 1087.DOI
- [21]Huang, B.; Clark, G.; Navarro-Moratalla, E.; Klein, D. R.; Cheng, R.; Seyler, K. L.; Zhong, D.; Schmidgall, E.; McGuire, M. A.; Cobden, D. H. ; et al. Layer-dependent ferromagnetism in a van der Waals crystal down to the monolayer limit. Nature 2017, 546 (7657), 270.DOI
- [22]Gong, C.; Li, L.; Li, Z.; Ji, H.; Stern, A.; Xia, Y.; Cao, T.; Bao, W.; Wang, C.; Wang, Y. ; et al. Discovery of intrinsic ferromagnetism in two-dimensional van der Waals crystals. Nature 2017, 546 (7657), 265.DOI
- [23]Deng, Y.; Yu, Y.; Song, Y.; Zhang, J.; Wang, N. Z.; Sun, Z.; Yi, Y.; Wu, Y. Z.; Wu, S.; Zhu, J. ; et al. Gate-tunable room-temperature ferromagnetism in two-dimensional Fe₃GeTe₂. Nature 2018, 563 (7729), 94.DOI
- [24]Liu, F.; You, L.; Seyler, K. L.; Li, X.; Yu, P.; Lin, J.; Wang, X.; Zhou, J.; Wang, H.; He, H. ; et al. Room-temperature ferroelectricity in CuInP₂S₆ ultrathin flakes. Nat. Commun. 2016, 7 (1), 12357.DOI
- [25]Xiao, J.; Zhu, H.; Wang, Y.; Feng, W.; Hu, Y.; Dasgupta, A.; Han, Y.; Wang, Y.; Muller, D. A.; Martin, L. W. ; et al. Intrinsic Two-Dimensional Ferroelectricity with Dipole Locking. Phys. Rev. Lett. 2018, 120 (22), 227601.DOI
- [26]Yuan, S.; Luo, X.; Chan, H. L.; Xiao, C.; Dai, Y.; Xie, M.; Hao, J. Room-temperature ferroelectricity in MoTe₂ down to the atomic monolayer limit. Nat. Commun. 2019, 10 (1), 1775.DOI
- [27]Jin, X.; Zhang, Y.-Y.; Pantelides, S. T.; Du, S. Integration of graphene and two-dimensional ferroelectrics: properties and related functional devices. Nanoscale Horiz. 2020, 5 (9), 1303.
- [28]Jin, X.; Tao, L.; Zhang, Y.-Y.; Pan, J.; Du, S. Intrinsically scale-free ferroelectricity in two-dimensional M₂X₂Y₆. Nano Res. 2021.
- [29]Li, C.-K.; Yao, X.-P.; Chen, G. Writing and deleting skyrmions with electric fields in a multiferroic heterostructure. Phys. Rev. Res. 2021, 3 (1), L012026.DOI
- [30]Sun, W.; Wang, W.; Li, H.; Zhang, G.; Chen, D.; Wang, J.; Cheng, Z. Controlling bimerons as skyrmion analogues by ferroelectric polarization in 2D van der Waals multiferroic heterostructures. Nat. Commun. 2020, 11 (1), 5930.
- [31]Sun, W.; Wang, W.; Zang, J.; Li, H.; Zhang, G.; Wang, J.; Cheng, Z. Manipulation of Magnetic Skyrmion in a 2D van der Waals Heterostructure via Both Electric and Magnetic Fields. Adv. Funct. Mater. 2021, 31 (47), 2104452.DOI
- [32]Shi, Y.; Guo, Y.; Wang, X.; Princep, A. J.; Khalyavin, D.; Manuel, P.; Michiue, Y.; Sato, A.; Tsuda, K.; Yu, S. ; et al. A ferroelectric-like structural transition in a metal. Nat. Mater. 2013, 12 (11), 1024.
- [33]Anderson, P. W.; Blount, E. I. Symmetry Considerations on Martensitic Transformations: "Ferroelectric" Metals? Phys. Rev. Lett. 1965, 14 (7), 217.
- [34]Liang, J.; Wang, W.; Du, H.; Hallal, A.; Garcia, K.; Chshiev, M.; Fert, A.; Yang, H. Very large Dzyaloshinskii-Moriya interaction in two-dimensional Janus manganese dichalcogenides and its application to realize skyrmion states. Phys. Rev. B 2020, 101 (18), 184401.
- [35]Yuan, J.; Yang, Y.; Cai, Y.; Wu, Y.; Chen, Y.; Yan, X.; Shen, L. Intrinsic skyrmions in monolayer Janus magnets. Phys. Rev. B 2020, 101 (9), 094420.
- [36]O’Hara, D. J.; Zhu, T.; Trout, A. H.; Ahmed, A. S.; Luo, Y. K.; Lee, C. H.; Brenner, M. R.; Rajan, S.; Gupta, J. A.; McComb, D. W. ; et al. Room Temperature Intrinsic Ferromagnetism in Epitaxial Manganese Selenide Films in the Monolayer Limit. Nano Lett. 2018, 18 (5), 3125.DOI
- [37]Cui, C.; Hu, W.-J.; Yan, X.; Addiego, C.; Gao, W.; Wang, Y.; Wang, Z.; Li, L.; Cheng, Y.; Li, P. ; et al. Intercorrelated In-Plane and Out-of-Plane Ferroelectricity in Ultrathin Two-Dimensional Layered Semiconductor In₂Se₃. Nano Lett. 2018, 18 (2), 1253.
- [38]Poh, S. M.; Tan, S. J. R.; Wang, H.; Song, P.; Abidi, I. H.; Zhao, X.; Dan, J.; Chen, J.; Luo, Z.; Pennycook, S. J .; et al. Molecular-Beam Epitaxy of Two-Dimensional In₂Se₃ and Its Giant Electroresistance Switching in Ferroresistive Memory Junction. Nano Lett. 2018, 18 (10), 6340.
- [39]Fert, A.; Cros, V.; Sampaio, J. Skyrmions on the track. Nat. Nanotechnol. 2013, 8 (3), 152.DOI
- [40]Xue, F.; Wang, Z.; Hou, Y.; Gu, L.; Wu, R. Control of magnetic properties of MnBi₂Te₄ using a van der Waals ferroelectric III₂-VI₃ film and biaxial strain. Phys. Rev. B 2020, 101 (18), 184426.
- [41]Gong, C.; Kim, E. M.; Wang, Y.; Lee, G.; Zhang, X. Multiferroicity in atomic van der Waals heterostructures. Nat. Commun. 2019, 10 (1), 2657.DOI