betaFeedback

WorksPhysics and Astronomy

Morphogenesis and self-organization of persistent filaments confined within flexible biopolymeric shells

Abstract

We systematically explore the self-assembly of semi-flexible polymers in deformable spherical confinement across a wide regime of chain stiffness, contour lengths and packing fractions by means of coarse-grained molecular dynamics simulations. Compliant, DNA-like filaments are found to undergo a continuous crossover from two distinct surface-ordered quadrupolar states, both characterized by tetrahedral patterns of topological defects, to either longitudinal or latitudinal bipolar structures with increasing polymer concentrations. These transitions, along with the intermediary arrangements that they involve, may be attributed to the combination of an orientational wetting phenomenon with subtle density- and contour-length-dependent variations in the elastic anisotropies of the corresponding liquid crystal phases. Conversely, the organization of rigid, microtubule-like polymers evidences a progressive breakdown of continuum elasticity theory as chain dimensions become comparable to the equilibrium radius of the encapsulating membrane. In this case, we observe a gradual shift from prolate, tactoid-like morphologies to oblate, erythrocyte-like structures with increasing contour lengths, which is shown to arise from the interplay between nematic ordering, polymer and membrane buckling. We further provide numerical evidence of a number of yet-unidentified, self-organized states in such confined systems of stiff achiral filaments, including spontaneous spiral smectic assemblies, faceted polyhedral and twisted bundle-like arrangements. Our results are quantified through the introduction of several order parameters and an unsupervised learning scheme for the localization of surface topological defects, and are in excellent agreement with field-theoretical predictions as well as classical elastic theories of thin rods and spherical shells.

Introduction

The tight packing of macromolecules within confined, crowded domains is commonly observed in a vast array of biological contexts [1]. Examples range from DNA arrangements in viral capsids [2] and chromosome organization in eukaryotic cells [3] to collagen fibrillar assemblies in connective tissues [4], and from protein (mis)folding [5] to the formation of actin bundles and networks in the cellular cytoskeleton [6]. Geometrical confinement, which may arise from the presence of physical boundaries such as membrane walls or fluid interfaces, generally reduces the entropy of individual molecules by restricting the ensemble of accessible conformations that they may adopt. These constraints are generally supplemented by additional steric forces emerging from the dense bulk environment, which may drastically affect organization even in the absence of significant specific interactions between macromolecules and their surroundings [7]. Such excluded-volume contributions have been suggested to largely control the conformational stability of endogenous proteins in the crowded intracellular medium [8, 9], and are crucial to numerous technological applications in such fields as microfluidics [10], mechanical filtration [11] and drug delivery [12].

Beyond these purely entropic considerations, the folding of macromolecules may be further constrained by the finite compliance of their constituent intra-molecular bonds. In polymer physics, a canonical example of such systems is the so-called worm-like chain (WLC) model of semi-flexible polymers, which describes the elastic response of fiber-like structures in terms of a bending rigidity penalizing local deviations away from a straight, linear state [13]. Instances of macromolecules whose conformational statistics may be well-captured by WLCs include many common biopolymers such as double-stranded DNA (dsDNA), microtubules, F-actin and intermediate filaments [14].

In self-avoiding WLCs, the local shape anisotropy imparted by bending stiffness, combined with the steric repulsion resulting from the impenetrability of the macromolecular backbone, is often sufficient to induce liquid-crystalline (LC) behavior at high-enough polymer concentrations [15]. The simplest instance of such structures, known as the nematic phase, is characterized by the presence of long-ranged orientational order driven by the spontaneous alignment of neighboring chain segments, and is ubiquitously observed in vivo and in vitro in dense solutions of biopolymers [16, 17]. This higher level of organization is associated with an additional form of elasticity, which emerges at the scale of the LC phase to describe the thermodynamic costs of distorting the spatial pattern of chain orientations away from its stable equilibrium arrangement [18].

The distinction between intrinsic (molecular) and emergent (LC) elasticity has given rise to two orthogonal and somewhat complementary theoretical descriptions of WLCs in confinement. The first, based on self-consistent field theory (SCFT), aims to predict the equilibrium state under given assembly conditions directly from the structural and mechanical properties of individual polymers [19]. This approach is, however, largely intractable to analytical methods, and relies rather fundamentally on the second-virial approximation [20]} — which is not obviously suited to the high packing densities relevant in many biological settings. The second proceeds from a continuum-level representation of the polymeric phase in terms of a mesoscopic director field, corresponding to the locally-averaged direction of alignment of chain backbone segments [21, 22]. This framework conversely leads to the coarse-graining of all salient thermodynamic quantities into a handful of scalar parameters, known as the Oseen-Frank (OF) elastic moduli [18], which are linked in a non-trivial fashion to the underlying molecular features of the polymer [23] — and are often understood as purely phenomenological, mean-field quantities.

Molecular simulations have thus retained a crucial role in exploring the quantitative interplay between self-organization, polymer mechanics and geometrical constraints in confined macromolecular systems. In particular, the case of WLCs confined within spherical cavities has been extensively studied as an idealized model for macromolecular packing in biological and microfluidic compartments [24–26]. In this context, a further source of frustration commonly arises when the director field at the cavity boundary lies coplanar to the sphere surface, as is typically favored by simple steric interactions between polymers and the confining wall or fluid interface. This additional constraint implies that the preferred local alignment cannot be maintained throughout space, and thus drives the formation of so-called topological defects — corresponding to localized “bald spots” in the surface orientational order — whose presence is imposed by topology to provide a total topological charge matching the Euler characteristic s=2s = 2 of the sphere, as first shown by Poincaré and Hopf [27]. Besides broad fundamental interest [28, 29], such topological defects have gathered considerable attention from the point of view of materials science due to their ease of functionalization [30], which holds significant promise for the synthesis of patchy colloids with tunable anisotropic interactions [31–33].

Despite this rich theoretical and experimental backdrop, the link between molecular properties and defect morphology in spherically-confined polymers has remained largely unresolved. The vast majority of numerical and analytical studies to date have focused on the case of a single long polymer chain, and generally predicted a spool-like folded structure as the system ground state [34–38]. These arrangements typically bear two surface topological defects of charge s=1s = 1 located along the spool symmetry axis, and resemble the organization of packaged dsDNA within small viral capsids [36]. Contrastingly, investigations of low-molecular-weight LCs in spherical cavities and shells have revealed a rich phenomenology involving various combinations and patterns of bulk and surface topological defects in the ground state, depending on shell thickness, anchoring conditions and relative values of the OF elastic moduli [39]. Such structures have remained highly elusive in macromolecular systems [40–42], with recent reported shortcomings of continuum elasticity for strongly-confined polymers raising further questions about their practical relevance and stability [43].

Another largely unexplored question regards the potential interplay between compartment flexibility and macromolecular organization. With few exceptions [44–47], a significant limitation shared by most previous investigations is their assumption of a perfectly rigid confining cavity, which may be inappropriate for many biophysical systems. Indeed, spontaneous deviations from ideal sphericity in phospholipid vesicles and biopolymeric shells may commonly result from thermal fluctuations or polymer-membrane interactions, as observed in microtubules and actin/filamin networks within liposomes and red blood cells (or erythrocytes) [48–51]. The morphology of eukaryotic nuclei has been similarly shown to be intimately linked to the structure and mechanics of the encapsulated chromatin fibers [52–54], suggesting that the mutual feedback between polymer folding and membrane conformation may play an essential role in genome organization and thus in the regulation of cellular function. From a practical standpoint, the ability to control the coiling of elastic nanowires through their confinement within swelling polymer shells [55] or liquid droplets [56] has also been demonstrated experimentally, and could be exploited as the basis of a variety of applications for nanomechanical energy storage [57].

To shed light on these issues, we here combine a generic model of self-avoiding WLCs with a minimal elastic description of thin amorphous shells. This numerical framework, introduced in § 2, allows for the direct control of the chain packing fraction in the case of pure steric interactions between macromolecules and their encapsulating membrane, and is found to provide a practical kinetic pathway to equilibrium in such hysteresis-prone systems of dense, confined polymers. By mapping the model mechanical parameters to experimental measurements, we illustrate its application to two biologically-relevant scenarios — namely, flexible, dsDNA-like filaments confined within the nuclear envelope (Secs. III-§ 6), and rigid, tubulin-like chains enclosed within the red blood cell plasma membrane (§ 7-§ 9). We finally summarize our results in Sec. VII, and discuss their potential physical and biological implications.

Numerical model

Discretized elastic description of polymerized membranes

Biological membranes may be broadly classified into two categories, depending on the nature of their underlying microscopic interactions. Fluid membranes, such as vesicles and liposomes, are typically stabilized by weak hydrophobic forces involving the hydrocarbon tail of amphiphilic chains, which generally lead to a dynamic, liquid-like form of molecular organization in physiological temperature conditions [58, 59]. Polymerized (or “tethered”) membranes, on the other hand, are characterized by fixed internal connectivity, which arises from the presence of stable cross-links between membrane molecular units, as in the case of the spectrin network of erythrocyte plasma membranes and of the lamina network of eukaryotic nuclear envelopes [58].

Despite their superficial similarity, these two types of surfaces belong to different universality classes, and therefore display markedly distinct physical behavior [60]. The vanishing shear modulus imposed by the lack of in-plane structure allows fluid membranes to continuously switch between different geometrical shapes at relatively low energetic cost, as illustrated by the budding and filopodial projections induced by protein-lipid interactions in the cell plasma membrane [61]. Conversely, the response of polymerized shells to distributed mechanical or osmotic stresses usually involves a non-linear buckling bifurcation, corresponding to a sudden collapse of the shell away from its reference elastic state, upon raising the magnitude of the applied constraints above a certain critical threshold [62]. Although the importance of buckling as a morphogenetic process has long been recognized [63, 64], the role of encapsulated macromolecules on its onset and on post-buckling structure in systems of polymerized membranes remains largely unexplored.

Following previous investigations of erythrocyte and nuclear envelopes [65, 66], we focus on the case of amorphous polymerized shells, in which elastic properties are taken to be homogeneous. To that end, we construct a discretized mesh representation of a spherical membrane by solving a numerical formulation of the classical Thomson problem [67]. We randomly distribute a number NvN_{\mathrm{v}} of vertices on the surface of a sphere of radius RR, and endow each vertex with an elementary point charge q=eq=e. Relaxation then amounts to minimizing the cost function C(Nv)=∑i<jrij−1C(N_{\mathrm{v}})=\sum_{i<j}r_{ij}^{-1}, with rijr_{ij} the vertex pairwise distance, which is proportional to the total vertex electrostatic repulsion energy. Note that the local hexagonal order of the corresponding ground state is generally associated with N5≥12N_{5}\geq12 minimal fivefold disclinations imposed by spherical topology [68], thus leading to elastic instabilities that have been shown to drive the faceting of crystalline membranes such as viral capsids [69]. However, for the large values of NvN_{\mathrm{v}} considered here, the strains induced by these disclinations are largely screened by complex patterns of dislocation defects [70] — which is found to provide a good quantitative approximation of uniform elastic shells for our purposes, as discussed further below.

We allow the particles to interact via a truncated Coulomb potential with cutoff radius rcut=0.5Rr_{\mathrm{cut}}=0.5R, which we verified to be large enough to bear a negligible effect on the final structure. We evolve the system towards equilibrium through the fast inertial relaxation engine [71], using a Lagrange multiplier approach to constrain vertex positions to the sphere surface. Upon convergence, we discard all electrostatic interactions and construct the membrane topology by computing the Delaunay triangulation of the relaxed configuration via the QuickHull algorithm [72]. The adjacency matrix describing the connected neighborhood V(i)\mathcal{V}(i) of any vertex ii is then kept fixed throughout the simulations, which mirrors the static character of membrane cross-links [58, 73]. Each generated bond is represented by a harmonic potential of stiffness kmk_{\mathrm{m}}, yielding a total stretching energy [74]

Hmembstretch=km4∑i=1Nv∑j∈V(i)(rij−rij0)2(1)\mathcal{H}_{\mathrm{memb}}^{\mathrm{stretch}}=\frac{k_{\mathrm{m}}}{4}\sum_{i=1}^{N_{\mathrm{v}}}\sum_{j\in\mathcal{V}(i)}\left(r_{ij}-r_{ij}^{0}\right)^{2} \tag*{(1)}

where the sum runs over all pairs of linked vertices ii and jj, denoting by rij0r_{ij}^{0} their separation distance in the relaxed spherical reference state. In practice, for all systems considered here, we find rij0≃r0=(8πR2/3Nv)0.5r_{ij}^{0}\simeq r_{0}=\left(8\pi R^{2}/\sqrt{3}N_{\mathrm{v}}\right)^{0.5}, indicating that the vertex distributions produced by our relaxation procedure are locally indistinguishable from uniform hexagonal packing. In this case, the membrane bending energy may be cast in the convenient form [74]

Hmembbend=κm∑⟨k,l⟩[1−cos⁡(ϕkl−ϕ0)](2)\mathcal{H}_{\mathrm{memb}}^{\mathrm{bend}}=\kappa_{\mathrm{m}}\sum_{\langle k,l\rangle}\left[1-\cos\left(\phi_{kl}-\phi_{0}\right)\right] \tag*{(2)}

where ϕkl=arccos⁡(n^k⋅n^l)\phi_{kl}=\arccos\left(\hat{\mathbf{n}}_{k}\cdot\hat{\mathbf{n}}_{l}\right) is the dihedral angle between the normals n^k\hat{\mathbf{n}}_{k} and n^l\hat{\mathbf{n}}_{l} of each unique pair of adjacent triangles ⟨k,l⟩\langle k,l\rangle sharing a common edge, and the hat notation indicates normalized vectors. In Eq. (2), the offset ϕ0=r0/3R\phi_{0}=r_{0}/\sqrt{3}R accounts for spontaneous spherical curvature. We finally enforce membrane self-avoidance by incorporating a short-ranged steric repulsive contribution between all non-bonded pairs of vertices,

Hmembexc=12∑i=1Nv∑j∉V(i)ur0WCA(rij)(3)\mathcal{H}_{\mathrm{memb}}^{\mathrm{exc}}=\frac{1}{2}\sum_{i=1}^{N_{\mathrm{v}}}\sum_{j\notin\mathcal{V}(i)}u_{r_{0}}^{\mathrm{WCA}}\left(r_{ij}\right) \tag*{(3)}

in which the Weeks-Chandler-Andersen (WCA) term ur0WCAu_{r_{0}}^{\mathrm{WCA}} represents excluded-volume interactions with effective diameter r0r_{0} through a truncated and shifted Lennard-Jones potential [75],

ur0WCA(r)={4ϵ[(r0r)12−(r0r)6+14]if r<21/6r0,0if r≥21/6r0u_{r_{0}}^{\mathrm{WCA}}(r)= \begin{cases} 4\epsilon\left[\left(\frac{r_{0}}{r}\right)^{12}-\left(\frac{r_{0}}{r}\right)^{6}+\frac{1}{4}\right] & \text{if }r<2^{1/6}r_{0},\\ 0 & \text{if }r\geq2^{1/6}r_{0} \end{cases}

where ϵ\epsilon defines the model unit of energy.

In the following, we make use of Nv=9,800N_{\mathrm{v}}=9{,}800 vertices, in which case the shell topology is found to bear N7≃250N_{7}\simeq250 sevenfold defects associated with N5=N7+12N_{5}=N_{7}+12 fivefold disclinations [68]. This arbitrary-large value of NvN_{\mathrm{v}} was chosen to allow for a fine-mesh discretization of the membrane surface, rather than to emulate any specific details of its underlying molecular structure. In the continuum limit, the parameters kmk_{\mathrm{m}} and κm\kappa_{\mathrm{m}} may be respectively linked to the Young’s modulus [74] Y0=2km/3Y_{0}=2k_{\mathrm{m}}/\sqrt{3} and bare bending modulus [76] κ0=3κm/2\kappa_0 = \sqrt{3}\kappa_m/2 of the two-dimensional (2D) material. To assess the quantitative accuracy of the model, we include in Supplemental Sec. SI a comparison of its computed force-extension behavior against the classical analytical predictions of Reissner for thin uniform elastic shells [77]. The excellent agreement observed in the linear response regime (see Supplemental Fig. S1) suggest that the system is largely unaffected by the reported shortcomings of Eq. (2) for irregular surface meshes [78], at least in the case of weak membrane deformations. Hence, the triangular tessellation obtained by Thomson relaxation provides an appropriate middle ground between ordered and randomized network descriptions of spherical shells [65], and yields a tractable expression for the Hamiltonian Hmemb=Hmembstretch+Hmembbend+Hmembexc\mathcal{H}_{\mathrm{memb}} = \mathcal{H}_{\mathrm{memb}}^{\mathrm{stretch}} + \mathcal{H}_{\mathrm{memb}}^{\mathrm{bend}} + \mathcal{H}_{\mathrm{memb}}^{\mathrm{exc}} suitable for molecular dynamics (MD) simulations.

The Kremer-Grest chain model

Similarly, since we restrict our focus to polymer chains characterized by a persistence length (lpl_p) significantly larger than the length of chemical bonds, we describe the encapsulated macromolecules through the Kremer-Grest model [79, 80], which corresponds to a discretized realization of the classical Kratky-Porod WLC [81, 82] with excluded volume constraints. In this framework, each polymer chain CC is represented as a linear assembly of NmN_m monomeric units indexed by kk, interacting via intra- and inter-molecular WCA repulsion,

Hpolyexc=∑C∑k,l∈CuWCA(rkl)+∑C,C′∑k∈Ck′∈C′uWCA(rkk′)(4)\mathcal{H}_{\mathrm{poly}}^{\mathrm{exc}} = \sum_C \sum_{k,l\in C} u^{\mathrm{WCA}}(r_{kl})+ \sum_{C,C'} \sum_{\substack{k\in C\\ k'\in C'}} u^{\mathrm{WCA}}(r_{kk'}) \tag*{(4)}

where comma-separated indices imply summation over unique pairs of distinct elements and the effective chain diameter σ\sigma sets the model unit of length. Chain connectivity is enforced by linking adjacent monomers through finitely-extensible non-linear elastic (FENE) springs,

upolyFENE(Δk)={−kcrc22log⁡[1−(Δkrc)2]if Δk<rc,0if Δk≥rcu_{\mathrm{poly}}^{\mathrm{FENE}}(\Delta_k) = \begin{cases} -\dfrac{k_c r_c^2}{2}\log\left[1-\left(\dfrac{\Delta_k}{r_c}\right)^2\right] & \text{if } \Delta_k < r_c,\\ 0 & \text{if } \Delta_k \ge r_c \end{cases}

in which Δk≡∥rk−rk−1∥\Delta_k \equiv\lVert\mathbf{r}_k-\mathbf{r}_{k-1}\rVert is the corresponding bond length, with rk\mathbf{r}_k the center-of-mass position of the kk-th bead. Chain stiffness is then governed by a simple angular potential of a similar form to Eq. (2),

upolybend(Θk)=κc(1−cos⁡Θk),u_{\mathrm{poly}}^{\mathrm{bend}}(\Theta_k) = \kappa_c(1-\cos\Theta_k),

where Θk≡arccos⁡(t^k⋅t^k+1)\Theta_k \equiv\arccos(\hat{\mathbf{t}}_k\cdot\hat{\mathbf{t}}_{k+1}) is the inter-bond angle associated with the triplet of consecutive monomers (k−1,k,k+1k-1,k,k+1), with t^k≡(rk−rk−1)/Δk\hat{\mathbf{t}}_k \equiv(\mathbf{r}_k-\mathbf{r}_{k-1})/\Delta_k the bond unit vector. We set rc=1.5 σr_c=1.5\,\sigma and kc=30 ϵ/σ2k_c=30\,\epsilon/\sigma^2, so that the individual bond length resulting from the competition between WCA repulsion and FENE stretching remains effectively constant throughout the simulations, and is given by Δk=lb≃0.97 σ\Delta_k=l_b\simeq0.97\,\sigma [83]. In this case, the polymer persistence length is simply related to the bending modulus κc\kappa_c via lp≃βκclbl_p\simeq\beta\kappa_c l_b, with β≡1/kBT\beta\equiv1/k_{\mathrm{B}}T the inverse temperature, which holds for stiff chains (βκc≳2\beta\kappa_c\gtrsim2) [84].

References

  1. [126]T. Odijk, Macromolecules 19, 2313 (1986).
  2. [127]F. Pampaloni, G. Lattanzi, A. Jonáš, T. Surrey, E. Frey, and E.-L. Florin, Proc. Natl. Acad. Sci. U.S.A. 103, 10248 (2006).
  3. [128]M. G. L. Van den Heuvel, M. P. de Graaff, and C. Dekker, Proc. Natl. Acad. Sci. U.S.A. 105, 7941 (2008).
  4. [129]E. Memet, F. Hilitski, M. A. Morris, W. J. Schwenger, Z. Dogic, and L. Mahadevan, eLife 7, e34695 (2018).
  5. [130]Y. Park, C. A. Best, K. Badizadegan, R. R. Dasari, M. S. Feld, T. Kuriabova, M. L. Henle, A. J. Levine, and G. Popescu, Proc. Natl. Acad. Sci. U.S.A. 107, 6731 (2010).
  6. [131]P. Prinsen and P. van der Schoot, Phys. Rev. E 68, 021701 (2003).
  7. [132]P. Bolhuis and D. Frenkel, J. Chem. Phys. 106, 666 (1997).
  8. [133]T. L. Chantawansri, A. W. Bosse, A. Hexemer, H. D. Ceniceros, C. J. García-Cervera, E. J. Kramer, and G. H. Fredrickson, Phys. Rev. E 75, 031802 (2007).
  9. [134]X. Xing, H. Shin, M. J. Bowick, Z. Yao, L. Jia, and M.-H. Li, Proc. Natl. Acad. Sci. U.S.A. 109, 5202 (2012).
  10. [135]D. Hirsch and K. A. Seaton, J. Math. Arts 14, 345 (2020).
  11. [136]D. N. Theodorou and U. W. Suter, Macromolecules 18, 1206 (1985).
  12. [137]T. Odijk, J. Chem. Phys. 108, 6923 (1998).
  13. [138]M. Emanuel, H. Mohrbach, M. Sayar, H. Schiessel, and I. M. Kulic, Phys. Rev. E 76, 061907 (2007).
  14. [139]J. Paulose, G. A. Vliegenthart, G. Gompper, and D. R. Nelson, Proc. Natl. Acad. Sci. U.S.A. 109, 19551 (2012).
  15. [140]A. Košmrlj and D. R. Nelson, Phys. Rev. X 7, 011002 (2017).
  16. [141]L. Lu, Z. Li, H. Li, X. Li, P. G. Vekilov, and G. E. Karniadakis, Sci. Adv. 5 (2019), 10.1126/sciadv.aax3905.
  17. [142]J. C. Wang, M. S. Turner, G. Agarwal, S. Kwong, R. Josephs, F. A. Ferrone, and R. W. Briehl, J. Mol. Biol. 315, 601 (2002).
  18. [143]J. Gao, P. Tang, Y. Yang, and J. Z. Y. Chen, Soft Matter 10, 4674 (2014).
  19. [144]K.-G. Lee, T. T. Miller, I. Anastassov, and D. W. Cohen, Cell Biol. Int. 28, 299 (2004).
  20. [145]S. Patel-Hett, J. L. Richardson, H. Schulze, K. Drabek, N. A. Isaac, K. Hoffmeister, R. A. Shivdasani, J. C. Bulinski, N. Galjart, J. H. Hartwig, and J. E. Italiano, Blood 111, 4605 (2008).
  21. [146]S. Dmitrieff, A. Alsina, A. Mathur, and F. J. Nédélec, Proc. Natl. Acad. Sci. U.S.A. 114, 4418 (2017).
  22. [147]A. Leforestier and F. Livolant, J. Mol. Biol. 396, 384 (2010).
  23. [148]Note that in the case of polymerized membranes, the effective surface tension γeff is related to the radial stress imposed by the encapsulated chains, and is generally scale-dependent at given internal pressure Π (Eq. (41)). Hence, Eqs. (27) and (41) would instead lead to an even faster decay κ ∝ V−2/3 under fixed osmotic conditions.
  24. [149]P. Prinsen and P. van der Schoot, J. Phys. Condens. Matter 16, 8835 (2004).
  25. [150]A. D. Stephens, P. Z. Liu, E. J. Banigan, L. M. Almassaha, V. Backman, S. A. Adam, R. D. Goldman, and J. F. Marko, Mol. Biol. Cell 29, 220 (2018).
  26. [151]A. E. Cohen and L. Mahadevan, Proc. Natl. Acad. Sci. U.S.A. 100, 12141 (2003).
  27. [152]E. Rideau, R. Dimova, P. Schwille, F. R. Wurm, and K. Landfester, Chem. Soc. Rev. 47, 8572 (2018).

Paper details

vlnc:W_4z4c296c
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 9

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents