betaFeedback

WorksPhysics and Astronomy

Observation of local atomic displacements intrinsic to the double zigzag chain structure of 1T-MTe2 (M = V, Nb, Ta)

Abstract

We describe the existence of local distortion discovered in the synchrotron x-ray single-crystal structure analysis of layered ditelluride 1T-MTe2 (M = V, Nb, Ta). In 1T-TaTe2, the double zigzag chain structure of Ta is deformed at about 170 K, and heptamer molecules are formed periodically at low temperatures. We found that some of the Ta atoms that compose the double zigzag chain structure appearing at high temperatures are locally displaced, resulting in local dimerization. This tendency weakens when Ta is replaced by V or Nb. Our results indicate that the local distortion persistently survives in these ditellurides, where the electronic degrees of freedom, including orbitals, are weakened. We further discuss the origin of local distortion in these ditellurides, which is different from many usual material systems where molecular formation occurs at low temperatures.

Introduction

Among transition metal compounds with orbital degrees of freedom, there are many substances whose atoms assemble to form “molecules” at low temperatures [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13]. Examples include dimers in LiRh2O4\mathrm{LiRh}_2\mathrm{O}_4 [1] and CuIr2S4\mathrm{CuIr}_2\mathrm{S}_4 [2], trimers in LiVO2\mathrm{LiVO}_2 [3, 4] and LiVS2\mathrm{LiVS}_2 [5], and heptamer (trimer/tetramer pair) in AlV2O4\mathrm{AlV}_2\mathrm{O}_4 [6, 14]. Although these molecules that form spontaneously in crystals have been thought to disappear and regular lattices are realized at high temperatures, recent local structure studies have revealed that local lattice distortions appear in various forms in a precursory manner [14, 15, 16, 17, 18, 19, 20]. For example, in Li2RuO3\mathrm{Li}_2\mathrm{RuO}_3 [15] and LiRh2O4\mathrm{LiRh}_2\mathrm{O}_4 [16], dimers that appear at low temperatures appear as short-range orders at high temperatures; in CuIr2S4\mathrm{CuIr}_2\mathrm{S}_4 [18], tetragonal distortions appear locally at high temperatures; in LiVS2\mathrm{LiVS}_2, short-range orders of zigzag chains that are unrelated to trimer in the low temperature phase appear and slowly fluctuate at high temperatures [19]. These can be interpreted as local nematic states in which the spontaneous symmetry lowering of the electronic system is strongly coupled to the lattice system [18], and the search for various distortion patterns and the elucidation of their mechanisms are important research themes that go beyond the category of molecular formation systems and have a broad impact on physical properties in general.

Layered transition metal ditellurides MTe2M\mathrm{Te}_2 provide a unique playground for such studies. In these material systems, Te-Te covalent bonds derived from large tellurium ions occur, which cause the formal valence of Te to shift from 2- and transfer additional electrons to the transition metal element MM. Depending on the amount of charge transfer, a variety of molecular formation patterns coupled with charge degrees of freedom appear at low temperatures. For example, in IrTe2\mathrm{IrTe}_2, a charge-ordered stripe state between Ir3+\mathrm{Ir}^{3+} and Ir4+\mathrm{Ir}^{4+} occurs at low temperatures, forming an Ir4+\mathrm{Ir}^{4+}–Ir4+\mathrm{Ir}^{4+} dimer state [21, 22], and superconductivity appears when this dimer phase is suppressed by Pt doping [23]. In 1T1T-MTe2M\mathrm{Te}_2 (M=VM = \mathrm{V}, Nb\mathrm{Nb}, Ta\mathrm{Ta}), transition metal elements form quasi-one-dimensional double zigzag chains, named “ribbon chain”, as shown in Figure 1(a) [24, 25, 26]. This chain is formed from multiple linear trimers, with each MM element offering 2/3 electrons for the formation of one trimer [26, 27]. An interesting feature of this system is that only at 1T1T-TaTe2\mathrm{TaTe}_2 the modulation of the charge changes at low temperatures below Tc∼170T_c \sim170 K and the double zigzag chain changes to Ta heptamers, as shown in Figure 1(b) [28]. This transformation is different from the situation in conventional matter systems where molecular formation occurs from a regular lattice, where the electron degrees of freedom are expected to be highly degenerate. Do unique local distortions appear in such ditellurides at high temperatures? In addition, clarifying whether the nature of local distortion differs between 1T1T-TaTe2\mathrm{TaTe}_2, where heptamerization occurs, and 1T1T-NbTe2\mathrm{NbTe}_2 and 1T1T-VTe2\mathrm{VTe}_2, where the double zigzag chain is maintained at low temperatures, will provide important insights into the background physics that generates local distortion.

Lattice structure and single-crystal XRD patterns of 1T-TaTe2

Figure 1. (a-b) The lattice structure of Ta ions at (a) 300 K and (b) 125 K. (c-d) Single crystal XRD patterns of 1T1T-TaTe2\mathrm{TaTe}_2 at (c) 300 K and (d) 125 K. Both the high and low temperature phases could be refined using the previously reported structure. Details are shown in the Appendix of this paper. (e) Geometrical arrangement of merohedral domains sharing a 2ˉ01\bar{2}01 plane in the crystal structure of the high-temperature phase monoclinic C2/mC2/m.

In this article, we report on the structural analysis of 1T1T-MTe2M\mathrm{Te}_2 (M=VM = \mathrm{V}, Nb\mathrm{Nb}, Ta\mathrm{Ta}) single crystals using synchrotron radiation X-rays. The anisotropy of the atomic displacement parameters (ADPs) obtained from the structural analysis suggests that the MM atom at the center of the double zigzag chain of these ditellurides is locally distorted, in the zigzag chain direction. Structural analysis using the split-site model shows that local distortion toward the heptamerization occurs, and this tendency is strongest at 1T1T-TaTe2\mathrm{TaTe}_2. This indicates that local distortions appear universally, as in many molecule-forming systems, even if the average structure of the high-temperature phase is in a state where the degeneracy of the orbital degrees of freedom has been resolved.

Results and discussions

Sample Preparation and experimental details

Single crystal samples of 1T1T-MTe2M\mathrm{Te}_2 (M=V,Nb,TaM = \mathrm{V}, \mathrm{Nb}, \mathrm{Ta}) were synthesized by a conventional solid phase reaction method. The mixture of the constituent elements in their amphoteric ratios was vacuum-sealed and sintered at 10001000 °C for M=NbM = \mathrm{Nb} and Ta, and at 850850 °C for M=VM = \mathrm{V} for 15 hours. The obtained samples are basically powders, but some of them contain tiny single crystals of several tens of micrometers on a side, which were used for diffraction experiments using synchrotron radiation x-rays. X-ray diffraction (XRD) experiments were conducted using the BL02B1 beamline at SPring-8 at an x-ray energy of 40 keV. The typical dimensions of the 1T1T-MTe2M\mathrm{Te}_2 (M=V,Nb,TaM = \mathrm{V}, \mathrm{Nb}, \mathrm{Ta}) single crystal used for the XRD experiment were 20×20×20 μm320 \times20 \times20\ \mu\mathrm{m}^{3}. A He-gas-blowing device was employed to cool the sample to 100 K. A 2D CdTe PILATUS detector was utilized with the diffractometer. The CrysAlisPro program was used to integrate the diffraction profiles. Diffraction intensity averaging and refinement of structural parameters were performed using Jana2006 program [29]. Crystal structure was visualized by using VESTA [30]. The obtained powder diffraction data were indexed using Conograph [31], and the analysis was performed using Rietan-FP [32].

Structural studies of 1T-TaTe2

Fig. 1(c) and (d) show single-crystal XRD patterns of 1T1T-TaTe2\mathrm{TaTe}_2 in the high temperature (300 K) and low temperature (125 K) phases. Although the Bragg peaks remain sharp, the presence of a merohedral domain sharing a 2ˉ01\bar{2}01 plane, as shown in Figure 1(e), is confirmed. In the following, we show the results of the analysis in which only one domain component is extracted. The diffraction pattern changes below the phase transition around 170 K, and the superlattice peak shown by the circle is observed at low temperatures.

The obtained crystal structures are shown in Figure 1(a) and (Figure 1b), both of which are consistent with the previously reported structures [25, 28, 33]. Details of the structure analysis results are summarized in the Appendix of this paper. It is noteworthy that the Ta-Ta distance constituting the linear trimer changes significantly between the high and low temperature phases. In the high-temperature phase, the linear trimer is composed of equally spaced Ta2-Ta1-Ta2 arrays, whereas in the low-temperature phase, the displacement of Ta1b ions is accompanied by a large difference in the distance between adjacent Ta-Ta inside the Ta2a-Ta1b-Ta2b array. This indicates that the Ta2a-Ta1b-Ta2b array does not form a linear trimer in the low-temperature phase, but rather transforms into a Ta2a-Ta1b dimer and isolated Ta2b ion. Although the contraction of the Ta-Ta distance upon heptamerization is greatest between Ta1a and Ta1b, the Ta1a-Ta1b distance of ∼3.34\sim3.34 Å in the low-temperature phase is still much longer than the Ta2a-Ta1b distance of ∼3.18\sim3.18 Å, indicating that the Ta2a-Ta1b bond is more essential. The large change in the Ta1a-Ta1b distance associated with the phase transition should be a side effect of the bb axis displacement of Ta1b to form dimers with two Ta2a simultaneously.

Structural analysis revealed that the atomic positions of the high-temperature phase are almost the same as those previously reported [25], and the anisotropic ADP at the Ta1 site also shows an anomalous elongation in the double zigzag chain direction as shown in the inset of Figure 2(a), as indicated in a previous report [28]. Figure 2(a) shows that the U22U_{22} parameter has an unusually large value compared to U11U_{11} and U33U_{33}. It is important to note that the U11U_{11} and U33U_{33} parameters are zero when extrapolated toward 0 K, but the U22U_{22} parameter clearly reaches a finite value. This indicates that the anomalous increase in U22U_{22} is not simply anisotropic strong thermal oscillation, but rather a local distortion at the Ta1 site. This is consistent with the possibility of dynamic disorder discussed in the previous report [28].

Temperature dependence of atomic displacement parameters, split-site model analysis, and Ta–Ta bond distances

Figure 2. (a) Temperature dependence of the atomic displacement parameters U11U_{11}, U22U_{22}, and U33U_{33} of the Ta1 site in the high temperature phase. The equations relating the temperature factor T to these atomic displacement parameters are given in the Appendix of this paper. U11U_{11}, U22U_{22}, U33U_{33} are the mean square amplitudes ⟨u2⟩\langle u^2\rangle in the reciprocal lattice vector a∗a^*, b∗b^*, c∗c^* directions. The inset shows the thermal oscillating ellipsoid showing 99 % probability of the Ta1 site. (b) Temperature dependence of RR values at each rr obtained by the split-site model. The inset shows a schematic picture of the split-site model. (c) Temperature dependence of Ta-Ta distance for average structure and split-site model, respectively.

In order to clarify the local displacement of the ions at the Ta1 site, we performed a structural analysis using a split-site model. This is an analytical method that examines the change in the confidence factor RR with the change in distance rr, assuming that the Ta1 site ions are not at the central position, but two ions with occupancy 0.5 exist at positions +r+r and −r-r along the bb axis, as shown in the inset of Figure 2(b). If the atomic displacement as represented by this model does not actually occur, the RR value will show a minimum at r=0r = 0. If it occurs, the RR value will be a minimum at a finite rr. As shown in Figure 2(b), the analysis shows that the RR value varies significantly with rr, reaching a minimum at about r=0.13r = 0.13 Å. This indicates that there is an intrinsic local atomic displacement in the high-temperature phase of 1T1T-TaTe2_2, where the local atomic displacement rr value that minimizes the RR value is almost independent of temperature, and consequently the Ta1-Ta2 bond that splits into two types, as shown in Figure 2(c). It seems strange that such local distortion is independent of temperature, but it should be noted that similar behavior has been observed at high temperatures in AlV2_2O4_4 [14] and Li2_2RuO3_3 [15] where molecular formation occurs at low temperature.

Structural studies of 1T1T-NbTe2_2 and 1T1T-VTe2_2

Will similar local atomic displacements appear in 1T1T-NbTe2_2 and 1T1T-VTe2_2, where the double zigzag chain structure is maintained down to low temperatures? The anisotropic ADPs of the high-temperature phases of these two materials are shown in the inset of Figure 3(a). Although a larger U22U_{22} is realized compared to U11U_{11} and U33U_{33}, its value is smaller than that of 1T1T-TaTe2_2. As summarized in Appendix, the values of lattice constants and bond lengths are close between 1T1T-TaTe2_2, 1T1T-NbTe2_2 and 1T1T-VTe2_2. Thus, the difference in magnitude of U22U_{22} indicates a clear difference in local structure between these telluriums. Also, as shown in Figure 3(a), the U22U_{22} parameter decreases in a temperature-dependent manner to zero at 0 K. Figure 3(b) shows the results of the split-site model analysis for these two materials: 1T1T-NbTe2_2 exhibits a minimum RR value at finite rr, but the value of rr that minimizes RR at 300 K is about 0.09 Å, which is smaller than that of 1T1T-TaTe2_2. The change of RR with rr is also very small compared to 1T1T-TaTe2_2. This trend is more pronounced for 1T1T-VTe2_2, where the RR value is almost constant over a wide rr range. As shown in Figure 3(c), the local atomic displacements, if any, of 1T1T-NbTe2_2 and 1T1T-VTe2_2 are much smaller than those of 1T1T-TaTe2_2 and decrease upon cooling to zero at 0 K.

Temperature dependence of atomic displacement parameters, fit quality, and local distortion

Figure 3. (a) Temperature dependence of the U11U_{11}, U22U_{22} and U33U_{33} parameters of 1T1T-NbTe2_2 and 1T1T-VTe2_2. Inset shows a schematic picture of the thermal oscillating ellipsoid of 1T1T-NbTe2_2 and 1T1T-VTe2_2 compared to that of 1T1T-TaTe2_2. (b) Temperature dependence of RR values at each rr obtained by the split-site model. The arrows in the figure indicate the minimum RR value. (c) Temperature dependence of local distortion rr for 1T1T-NbTe2_2 and 1T1T-VTe2_2. The rr range from the smallest RR value to a 0.5% increase was defined as the error bar.

Discussion based on the single-crystal X-ray diffraction experimental results

These experimental results raise two questions. The first question is what is the origin of these local atomic displacements. In the high-temperature phase of 1T1T-TaTe2_2, we can predict that two dimer patterns with equal lattice energy can be realized, as shown in the right side of Figure 4(a), which are thermally fluctuating, resulting in a linear trimer in the average structure, as shown in the left side of Figure 4(a). In the three-center, two-electron bonding state derived from the linear trimer, three orbitals are formed: a bonding orbital, a non-bonding orbital, and an anti-bonding orbital, with two electrons stored in the bonding orbitals, which are energetically stabilized, as shown in the left energy scheme of Figure 4(a). When local atomic displacement occurs, the linear trimer is transformed into a dimer-isolated atom pair, which should result in the formation of a bonding orbital and an anti-bonding orbital, derived from the dimer, and an isolated atomic orbital, as shown in the right energy scheme of Figure 4(a). The three energetically equally spaced orbitals formed by the linear trimer and dimer-isolated atom pairs are similar at first glance. However, if the actual interatomic distances of the dimer are sufficiently closer than those of the linear trimer, the bonding orbitals should be Δ\Delta lower in energy for the dimer. If the energy difference Δ\Delta is larger than the energy loss due to lattice distortion, ε\varepsilon, the local dimer is expected to stabilize. Since the energies between the two dimer patterns are equal, we expect the two dimer patterns to appear thermally fluctuating, as shown in Figure 4(a). The transition process between the two dimer patterns is via a trimer state, and the low energy of the bonding orbital in this trimer state should facilitate the transition between the two patterns. The long-range ordering of this local distortion at low temperatures leads to the formation of heptamer clusters, as shown in Figure 1(b).

Energy schemes and schematic diagram of the elemental M dependence

Figure 4. (a) Energy schemes in the linear trimer state and in the dimer and isolated-atom states. (b) Schematic diagram of the elemental MM dependence of the relationship between the bonding orbital energy difference Δ\Delta and the lattice system energy loss ε\varepsilon in the linear trimer state and the dimer with isolated atom states, and the temperature dependence of the local distortion rr caused by the difference in MM.

Another question is why different behaviors appear for 1T1T-TaTe2_2, 1T1T-NbTe2_2, and 1T1T-VTe2_2. As shown in Figure 3(c), local atomic displacements are largest for Ta(5dd) and small for Nb(4dd) and V(3dd). In 1T1T-TaTe2_2 with large 5d5d orbitals, the electronic energy gain Δ\Delta is expected to be the largest because the orbitals overlap more during dimerization than in 1T1T-NbTe2_2 and 1T1T-VTe2_2. If ε<Δ\varepsilon< \Delta is realized at 1T1T-TaTe2_2, the overall energy of the system including lattice energy with respect to atomic positions will be as shown in Figure 4(b). Since atomic displacement and the associated local dimerization stabilize the system, and this trend does not change even when the temperature is lowered, the atomic displacement rr does not show any temperature dependence, and the local distortion is expected to survive until just above the phase transition. On the other hand, for 4d4d Nb and 3d3d V, the orbital overlap is small and the energy is not very stable due to local dimerization. Therefore, ε≥Δ\varepsilon\ge\Delta is realized and the energy of the whole system including lattice energy has a flat shape with respect to rr. The energy drops to a low central position when the temperature is lowered. Because of these differences in energy schemes, it is thought that among the three tellurides, only 1T1T-TaTe2_2 produces large local distortions, which are maintained at low temperatures and develop into heptamers. From the above discussion, it seems likely that in 1T1T-NbTe2_2 and 1T1T-VTe2_2, when the distance between adjacent transition metals is closer, the orbital overlap becomes larger and dimer (heptamer) states such as 1T1T-TaTe2_2 are formed. It should be noted that it has been reported that applying pressure to 1T1T-NbTe2_2 induces a structural evolution from the trimeric to the dimeric structure [34], confirming the validity of this argument.

An argument similar to the local distortion of 1T1T-TaTe2_2 might be applied to other material systems that exhibit molecular formation at low temperatures, such as the spinel compound AlV2_2O4_4. It has been argued that vanadium in AlV2_2O4_4 spontaneously forms a heptamer molecule at about 700 K. Based on the Curie paramagnetic component in the low-temperature phase by magnetization measurements, the heptamer has been revealed to be composed of 9 bonds by 18 electrons [6]. However, recent structural analysis of the split-site model on synchrotron XRD data has revealed that the heptamer is actually composed of trimer/tetramer pairs [14]. The two structures are compared in Fig. 25 of the paper by D.I. Khomskii and S.V. Streltsov [35]. The nature of the difference between the two types of molecular structures proposed for AlV2_2O4_4 can be interpreted as whether the three bonds connecting the upper and lower triangular trimer are linear trimers consisting of three-center two-electron bonds or pairs of dimers and isolated atoms. This is very similar to the present case. An interesting difference is that such local distortions appear in the low-temperature ordered phase in AlV2_2O4_4, whereas they appear only in the high-temperature phase in 1T1T-TaTe2_2. This indicates that unconventional orbital ordering states that appear in the low-temperature phase can universally appear as local distortions in the high-temperature phase, even in systems like 1T1T-TaTe2_2, where there is no short-range order in the low-temperature ordered phase.

The presence of local distortion in the high-temperature phase not only has important implications for the mechanism of phase transitions, but is also important for understanding the thermodynamics of the high-temperature phase. For example, while high thermal conductivity is generally realized in the metallic state due to itinerant electrons, it has been observed that in CuIr2_2S4_4, which undergoes insulating transition with molecular formation at low temperatures, the thermal conductivity of the high temperature metallic phase is lower than that of the insulating low temperature phase. It is argued that local distortion suppresses phonon thermal conduction [36, 37, 38]. In addition, the multiple degrees of freedom of electrons are expected to play an important role in the entropy changes associated with molecular formation [5, 8]. The presence of local distortion will be a new factor, not previously considered, to the concept of electron degrees of freedom in the high-temperature phase. In this respect, the finding of differences in local structure among the systematics of M=VM = \mathrm{V}, Nb, and Ta in this study should correspond to providing an attractive stage for discussing the role of local distortion on physical properties through comparison.

Acknowledgments

The work leading to these results has received funding from the Grant in Aid for Scientific Research (Nos. JP20H02604, JP21K18599, JP21J21236) and Research Foundation for the Electrotechnology of Chubu. This work was carried out under the Visiting Researcher’s Program of the Institute for Solid State Physics, the University of Tokyo, and the Collaborative Research Projects of Laboratory for Materials and Structures, Institute of Innovative Research, Tokyo Institute of Technology. Single-crystal and powder XRD experiments were conducted at the BL02B1 and BL02B2 of SPring-8, Hyogo, Japan (Proposals No. 2019B1085, 2021A0070, 2021B1261, 2021B1136, 2021B1261, 2022A0304, 2022B0607, 2022B1570, 2022B1582, and 2022B1862), and at the BL5S2 of Aichi Synchrotron Radiation Center, Aichi Science and Technology Foundation, Aichi, Japan (Proposals No. 202202037, 202201033, 202105170, 202104111, 2021L3002, 2021L2002, 2021L1002 and 2020L4002).

Single crystal X-ray diffraction analysis results

Here, the temperature factor TT is expressed as a function of the atomic displacement parameters U11U_{11}, U22U_{22}, U33U_{33}, U12U_{12}, U13U_{13} and U23U_{23}, using the following equation,

T=exp⁡{−2π2(h2a∗2U11+k2b∗2U22+l2c∗2U33+2hka∗b∗U12+2hla∗c∗U13+2klb∗c∗U23)}.T = \exp\left\{-2\pi^2\left(h^2a^{*2}U_{11} + k^2b^{*2}U_{22} + l^2c^{*2}U_{33} + 2hka^*b^*U_{12} + 2hla^*c^*U_{13} + 2klb^*c^*U_{23}\right)\right\}.

U11U_{11}, U22U_{22} and U33U_{33} are the mean square amplitudes ⟨u2⟩\langle u^2\rangle in the reciprocal lattice vector a∗a^*, b∗b^* and c∗c^* directions.

110 (low TT phase)175 (high TT phase)
Temperature (K)110 (low TT phase)175 (high TT phase)
Wavelength (Å)0.310070.31007
Crystal dimension (μm3\mu\mathrm{m}^{3})20×20×2020×20×20
space groupC2/mC2/mC2/mC2/m
aa (Å)14.7669(3)14.7408(4)
bb (Å)10.8702(2)3.62940(10)
cc (Å)9.2926(2)9.3287(2)
β\beta (°)110.630(8)110.864(8)
VV (Å3^{3})1395.99(5)466.36(3)
ZZ186
F(000)F(000)31861062
(sin⁡θ/λ)Max(\sin\theta/\lambda)_{\mathrm{Max}} (Å−1^{-1})1.35131.3512
NTotal,obsN_{\mathrm{Total,obs}}9231332489
NUnique,obsN_{\mathrm{Unique,obs}}133724637
Average redundancy6.97.0
Completeness0.9040.894
Structural analysis using anisotropic displacement parameters
R1R_{1} [# of reflections]0.066 [12475]0.0467 [4259]
R1R_{1} (I>4σI > 4\sigma) [# of reflections]0.0445 [9365]0.0358 [3586]
GOF [# of reflections]1.035 [12475]1.057 [4259]
Structural analysis without using anisotropic displacement parameters*
split-site modelNot usedUseNot used
R1R_{1} [# of reflections]0.0673 [12475]0.0468 [4259]0.1318 [4259]
R1R_{1} (I>4σI > 4\sigma) [# of reflections]0.0456 [9365]0.0359 [3586]0.1152 [3586]
GOF [# of reflections]1.037 [12475]1.048 [4259]1.093 [4259]

Table 1. Summary of crystallographic data of 1T-TaTe2_2.

siteWyck.Occ.x/ax/ay/by/bz/cz/cUeqU_{\mathrm{eq}} (Å2^{2})
Ta12d2d11/21/2−1/2-1/200.01177(4)
Ta24i4i10.63944(2)00.29083(2)0.00437(2)
Te14i4i10.79655(2)1/21/20.37790(2)0.00419(3)
Te24i4i10.49515(2)−1/2-1/2-0.30921(2)0.00431(3)
Te34i4i10.64883(2)00.01094(2)0.00551(3)

Table 2. Structural parameters of 1T-TaTe2_2 at 175 K without the split-site model.

siteU11U_{11} (Å2^{2})U22U_{22} (Å2^{2})U33U_{33} (Å2^{2})U12U_{12} (Å2^{2})U13U_{13} (Å2^{2})U23U_{23} (Å2^{2})
Ta10.00341(6)0.02829(13)0.00349(7)00.00109(5)0
Ta20.00357(3)0.00539(4)0.00348(4)00.00044(3)0
Te10.00394(5)0.00370(5)0.00420(6)00.00054(4)0
Te20.00440(5)0.00427(5)0.00416(6)00.00139(5)0
Te30.00711(6)0.00444(5)0.00429(6)00.00119(5)0

Table 3. Anisotropic atomic displacement parameters of 1T-TaTe2_2 at 175 K without the split-site model.

siteWyck.Occ.x/ax/ay/by/bz/cz/cUeq(Uiso)U_{eq}(U_{iso}) (Ų)
Ta14g4g0.51/2-0.53555(7)00.00430(3)
Ta24i4i10.63944(2)00.29083(2)0.00441(2)
Te14i4i10.79655(2)1/20.37788(2)0.00425(3)
Te24i4i10.49516(2)-1/2-0.30919(2)0.00432(2)
Te34i4i10.64882(2)00.01091(2)0.00551(3)

Table IV. Structural parameters of 1T1T-TaTe2\mathrm{TaTe}_2 at 175 K with the split-site model.

In the split-site model analysis, isotropic ADP is used only for the Ta1 site, and anisotropic ADP is used for the other elements. The fact that UisoU_{iso} at the Ta1 site and UeqU_{eq} at other sites are almost equal indicates the validity of this analysis.

siteWyck.Occ.x/ax/ay/by/bz/cz/cUeqU_{eq} (Ų)
Ta1a2d2d101/21/20.00234(3)
Ta1b4h4h100.19316(2)1/20.00205(2)
Ta2a8j8j10.85918(2)0.33810(2)0.21004(2)0.00196(2)
Ta2b4i4i10.86247(2)00.20874(2)0.00229(2)
Te1a8j8j10.70510(2)-0.16609(2)0.12266(2)0.00228(2)
Te1b4i4i10.79909(2)0-0.12305(3)0.00223(3)
Te2a4i4i10.99543(2)1/20.18923(3)0.00216(3)
Te2b8j8j10.99419(2)0.17096(2)0.19070(2)0.00226(2)
Te3a4i4i10.86348(2)00.49175(3)0.00207(3)
Te3b8j8j10.84603(2)0.33834(2)0.49008(2)0.00215(2)

Table V. Structural parameters of 1T1T-TaTe2\mathrm{TaTe}_2 at 110 K without the split-site model.

siteU11U_{11} (Ų)U22U_{22} (Ų)U33U_{33} (Ų)U12U_{12} (Ų)U13U_{13} (Ų)U23U_{23} (Ų)
Ta1a0.00143(5)0.00343(6)0.00215(7)00.00064(5)0
Ta1b0.00172(4)0.00223(4)0.00215(5)00.00063(4)0
Ta2a0.00158(3)0.00201(3)0.00199(3)-0.00004(2)0.00024(2)-0.00005(2)
Ta2b0.00187(4)0.00266(4)0.00210(5)00.00040(4)0
Te1a0.00187(4)0.00207(4)0.00247(5)0.00004(3)0.00023(4)0.00006(3)
Te1b0.00169(6)0.00216(6)0.00242(7)00.00021(5)0
Te2a0.00208(6)0.00191(5)0.00251(7)00.00083(5)0
Te2b0.00226(4)0.00199(4)0.00247(5)-0.00008(3)0.00077(4)0.00001(3)
Te3a0.00197(6)0.00182(5)0.00246(7)00.00084(5)0
Te3b0.00186(4)0.00195(4)0.00258(5)0.00001(3)0.00072(4)0.00001(3)

Table VI. Anisotropic atomic displacement parameters of 1T1T-TaTe2\mathrm{TaTe}_2 at 110 K without the split-site model.

Ta1a and Ta1b sites are from the high temperature phase Ta1 site, Ta2a and Ta2b sites are from the high temperature phase Ta2 site, Te1a and Te1b sites are from the high temperature phase Te1 site, Te2a and Te2b are from the high temperature phase Te2 site, Te3a and Te3b are from the high temperature phase Te3 site of the high-temperature phase.

Temperature (K)300
Wavelength (Å)0.31011
Crystal dimension (μm3\mu\mathrm{m}^{3})20×20×1020 \times20 \times10
space groupC2/mC2/m
aa (Å)14.6619(5)
bb (Å)3.63760(10)
cc (Å)9.3144(3)
β\beta (°)110.070(8)
VV (Å3^{3})466.61(3)
ZZ6
F(000)F(000)870
(sin⁡θ/λ)Max(\sin\theta/\lambda)_{\mathrm{Max}} (Å−1^{-1})1.2499
NTotal,obsN_{\mathrm{Total,obs}}29479
NUnique,obsN_{\mathrm{Unique,obs}}3618
Average redundancy8.1
Completeness0.878
Structural analysis using anisotropic displacement parameters
R1R_{1} [# of reflections]0.0434 [3494]
R1R_{1} (I>4σI > 4\sigma) [# of reflections]0.0290 [2778]
GOF [# of reflections]0.981 [3494]
Structural analysis without using anisotropic displacement parameters*
split-site modelUseNot used
R1R_{1} [# of reflections]0.0441 [3494]0.0564 [3494]
R1R_{1} (I>4σI > 4\sigma) [# of reflections]0.0294 [2778]0.0407 [2778]
GOF [# of reflections]0.998 [3494]1.061 [3494]

Table VII. Summary of crystallographic data of 1T-NbTe2_2 at 300 K.

siteWyck.Occ.x/ax/ay/by/bz/cz/cUeqU_{\mathrm{eq}} (Å2^{2})
Nb12d2d11/21/2−1/2-1/200.01070(4)
Nb24i4i10.638910(14)00.29045(2)0.00829(3)
Te14i4i10.797228(11)1/21/20.378315(18)0.00888(3)
Te24i4i10.503383(11)−1/2-1/20.309539(18)0.00867(3)
Te34i4i10.649411(11)00.009461(18)0.00865(3)

Table VIII. Summary of crystallographic data of 1T-NbTe2_2 at 300 K without the split-site model.

siteU11U_{11} (Å2^{2})U22U_{22} (Å2^{2})U33U_{33} (Å2^{2})U12U_{12} (Å2^{2})U13U_{13} (Å2^{2})U23U_{23} (Å2^{2})
Nb10.00864(8)0.01617(12)0.00719(9)00.00259(7)0
Nb20.00853(6)0.00850(7)0.00692(6)00.00147(5)0
Te10.00891(5)0.00769(5)0.00863(5)00.00119(4)0
Te20.00998(5)0.00792(5)0.00824(5)00.00327(4)0
Te30.00971(5)0.00735(5)0.00864(5)00.00284(4)0

Table IX. Anisotropic atomic displacement parameters of 1T-NbTe2_2 at 300 K without the split-site model.

siteWyck.Occ.x/ax/ay/by/bz/cz/cUeq(Uiso)U_{\mathrm{eq}}(U_{\mathrm{iso}}) (Å2^{2})
Nb14g4g0.51/21/2-0.52321(19)00.00812(5)
Nb24i4i10.63892(2)00.29044(2)0.00830(3)
Te14i4i10.79723(2)1/21/20.37831(2)0.00889(3)
Te24i4i10.50338(2)−1/2-1/20.30954(2)0.00868(3)
Te34i4i10.64941(2)00.00948(2)0.00865(3)

Table X. Structural parameters of 1T-NbTe2_2 at 300 K with the split-site model.

In the split-site model analysis, isotropic ADP is used only for the Nb1 site, and anisotropic ADP is used for the other elements. The fact that UisoU_{\mathrm{iso}} at the Nb1 site and UeqU_{\mathrm{eq}} at other sites are almost equal indicates the validity of this analysis.

Temperature (K)100
Wavelength (Å)0.31011
Crystal dimension (µm³)20×20×10
space groupC2/mC2/m
aa (Å)14.5770(3)
bb (Å)3.63410(10)
cc (Å)9.2961(2)
β\beta (°)109.956(8)
VV (ų)462.88(3)
ZZ6
F(000)F(000)870
(sin⁡θ/λ)Max(\sin\theta/\lambda)_{Max} (Å⁻¹)1.2500
NTotal,obsN_{Total,obs}28124
NUnique,obsN_{Unique,obs}3608
Average redundancy7.8
Completeness0.882
Structural analysis using anisotropic displacement parameters
R1R_1 [# of reflections]0.0453 [3504]
R1R_1 (I>4σI > 4\sigma) [# of reflections]0.0345 [2842]
GOF [# of reflections]0.986 [3504]
Structural analysis without using anisotropic displacement parameters*
split-site modelUseNot used
R1R_1 [# of reflections]0.0459 [3504]0.0469 [3504]
R1R_1 (I>4σI > 4\sigma) [# of reflections]0.0349 [2842]0.0359 [2842]
GOF [# of reflections]0.993 [3504]1.017 [3504]

Table XI. Summary of crystallographic data of 1T-NbTe₂ at 100 K.

siteWyck.Occ.x/ax/ay/by/bz/cz/cUeqU_{eq} (Ų)
Nb12d2d11/2-1/200.00464(4)
Nb24i4i10.63853(2)00.20955(2)0.00385(3)
Te14i4i10.79750(2)1/20.37881(2)0.00392(3)
Te24i4i10.503383(11)-1/20.30954(2)0.00391(3)
Te34i4i10.64991(2)00.00941(2)0.00385(3)

Table XII. Summary of crystallographic data of 1T-NbTe₂ at 100 K without the split-site model.

siteU11U_{11} (Ų)U22U_{22} (Ų)U33U_{33} (Ų)U12U_{12} (Ų)U13U_{13} (Ų)U23U_{23} (Ų)
Nb10.00440(9)0.00579(10)0.00332(9)00.00079(8)0
Nb20.00426(7)0.00336(7)0.00319(7)00.00030(5)0
Te10.00431(6)0.00301(5)0.00359(6)00.00025(4)0
Te20.00465(6)0.00315(5)0.00350(5)00.00086(4)0
Te30.00457(6)0.00290(5)0.00353(5)00.00069(4)0

Table XIII. Anisotropic atomic displacement parameters of 1T-NbTe₂ at 100 K without the split-site model.

siteWyck.Occ.x/ax/ay/by/bz/cz/cUeq(Uiso)U_{eq}(U_{iso}) (Ų)
Nb14g4g0.51/20.5113(4)00.00405(6)
Nb24i4i10.63854(2)00.29028(2)0.00384(4)
Te14i4i10.79751(2)1/20.37881(2)0.00391(3)
Te24i4i10.50338(2)-1/20.30954(2)0.00390(3)
Te34i4i10.64991(2)00.00943(2)0.00383(3)

Table XIV. Structural parameters of 1T-NbTe₂ at 100 K with the split-site model.

In the split-site model analysis, isotropic ADP is used only for the Nb1 site, and anisotropic ADP is used for the other elements. The fact that UisoU_{iso} at the Nb1 site and UeqU_{eq} at other sites are almost equal indicates the validity of this analysis.

Temperature (K)100
Wavelength (Å)0.311
Crystal dimension (μm3\mu\mathrm{m}^{3})30×30×3030 \times30 \times30
space groupC2/mC2/m
aa (Å)14.3110(2)
bb (Å)3.59625(4)
cc (Å)9.09130(10)
β\beta (°)109.602(2)
VV (Å3^{3})440.770(9)
ZZ6
F(000)F(000)762
(sin⁡θ/λ)Max(\sin\theta/\lambda)_{\mathrm{Max}} (Å−1^{-1})1.7824
NTotal,obsN_{\mathrm{Total,obs}}41843
NUnique,obsN_{\mathrm{Unique,obs}}9196
Average redundancy4.6
Completeness0.831
Structural analysis using anisotropic displacement parameters
R1R_{1} [# of reflections]0.0708 [8327]
R1R_{1} (I>4σI > 4\sigma) [# of reflections]0.0607 [7414]
GOF [# of reflections]1.323 [8327]
Structural analysis without using anisotropic displacement parameters*
split-site modelUseNot used
R1R_{1} [# of reflections]0.0711 [8327]0.0720 [8327]
R1R_{1} (I>4σI > 4\sigma) [# of reflections]0.0610 [7414]0.0620 [7414]
GOF [# of reflections]1.319 [8327]1.316 [8327]

Table XV. Summary of crystallographic data of 1TT-VTe2_2 at 100 K.

  • In this analysis, isotropic ADP is used only for the V1 site, and anisotropic ADP is used for the remaining sites.

siteWyck.Occ.x/ax/ay/by/bz/cz/cUeqU_{\mathrm{eq}} (Å2^{2})
V12d2d11/21/2−1/2-1/200.00503(6)
V24i4i10.64217(4)00.29701(6)0.00431(4)
Te14i4i10.79577(2)1/21/20.37769(2)0.00396(2)
Te24i4i10.50775(2)−1/2-1/20.30650(2)0.00377(2)
Te34i4i10.64568(2)00.01414(2)0.00378(2)

Table XVI. Summary of crystallographic data of 1TT-VTe2_2 at 100 K without the split-site model. atomic coordinates

siteU11U_{11} (Å2^{2})U22U_{22} (Å2^{2})U33U_{33} (Å2^{2})U12U_{12} (Å2^{2})U13U_{13} (Å2^{2})U23U_{23} (Å2^{2})
V10.00440(13)0.00684(16)0.00345(13)00.00079(11)0
V20.00447(8)0.00465(9)0.00319(9)00.00047(7)0
Te10.00407(3)0.00373(3)0.00334(3)00.00026(3)0
Te20.00420(3)0.00365(3)0.00297(3)00.00055(3)0
Te30.00403(3)0.00353(3)0.00327(3)00.00053(3)0

Table XVII. Anisotropic atomic displacement parameters of 1TT-VTe2_2 at 100 K without the split-site model.

siteWyck.Occ.x/ax/ay/by/bz/cz/cUeq(Uiso)U_{\mathrm{eq}}(U_{\mathrm{iso}}) (Å2^{2})
V14g4g0.51/21/20.5135(5)00.00428(7)
V24i4i10.64217(4)00.29696(6)0.00431(4)
Te14i4i10.79577(2)1/21/20.37769(2)0.00396(2)
Te24i4i10.50775(2)−1/2-1/20.30650(2)0.00377(2)
Te34i4i10.64568(2)00.01414(2)0.00378(2)

Table XVIII. Structural parameters of 1TT-VTe2_2 at 100 K with the split-site model. atomic coordinates

In the split-site model analysis, isotropic ADP is used only for the V1 site, and anisotropic ADP is used for the other elements. The fact that UisoU_{\mathrm{iso}} at the V1 site and UeqU_{\mathrm{eq}} at other sites are almost equal indicates the validity of this analysis.

References

References

  1. [1]Y. Okamoto, S. Niitaka, M. Uchida, T. Waki, M. Takigawa, Y. Nakatsu, A. Sekiyama, S. Suga, R. Arita, and H. Takagi, Phys. Rev. Lett. 101, 086404 (2008).
  2. [2]P. G. Radaelli, Y. Horibe, M. J. Gutmann, H. Ishibashi, C. H. Chen, R. M. Iberson, Y. Koyama, Y. S. Hor, V. Kiryukhin, and S. W. Cheong, Nature (London) 416, 155 (2002).
  3. [3]K. K. Kojima, N. Katayama, S. Tamura, M. Shiomi, and H. Sawa, Phys. Rev. B 100, 235120 (2019).
  4. [4]K. Kojima, N. Katayama, Y. Matsuda, M. Shiomi, R. Ishii, and H. Sawa, Phys. Rev. B 107, L020101 (2023).
  5. [5]N. Katayama, M. Uchida, D. Hashizume, S. Niitaka, J. Matsuno, D. Matsumura, Y. Nishihata, J. Mizuki, N. Takeshita, A. Gauzzi, M. Nohara, and H. Takagi, Phys. Rev. Lett. 103, 146405 (2009).
  6. [6]Y. Horibe, M. Shingu, K. Kurushima, H. Ishibashi, N. Ikeda, K. Kato, Y. Motome, N. Furukawa, S. Mori, and T. Katsufuji, Phys. Rev. Lett. 96, 086406 (2006).
  7. [7]N. Katayama, H. Takeda, T. Yamaguchi, Y. Yamada, K. Iida, M. Takigawa, Y. Ohta, and H. Sawa, Phys. Rev. B 102, 081106(R) (2020).
  8. [8]N. Katayama, S. Tamura, T. Yamaguchi, K. Sugimoto, K. Iida, T. Matsukawa, A. Hoshikawa, T. Ishigaki, S. Kobayashi, Y. Ohta, and H. Sawa, Phys. Rev. B 98, 081104(R) (2018).
  9. [9]Y. Okamoto, H. Amano, N. Katayama, H. Sawa, K. Niki, R. Mitoka, H. Harima, T. Hasegawa, N. Ogita, Y. Tanaka, M. Takigawa, Y. Yokoyama, K. Takehana, Y. Imanaka, Y. Nakamura, H. Kishida, and K. Takenaka, Nat. Commun. 11, 3144 (2020).
  10. [10]Y. Miura, Y. Yasui, M. Sato, N. Igawa, and K. Kakurai, J. Phys. Soc. Jpn. 76, 033705 (2007).
  11. [11]D. Hirai, K. Kojima, N. Katayama, M. Kawamura, D. Nishio-Hamane, and Z. Hiroi, J. Am. Chem. Soc. 144, 17857 (2022).
  12. [12]S. Kobayashi, N. Katayama, T. Manjo, H. Ueda, C. Michioka, J. Sugiyama, Y. Sassa, O. K. Forslund, M. Månsson, K. Yoshimura, and H. Sawa, Inorg. Chem. 58, 14304 (2019).
  13. [13]M. Schmidt, W. Ratcliff, P. G. Radaelli, K. Refson, N. M. Harrison, and S. W. Cheong, Phys. Rev. Lett. 92, 056402 (2004).
  14. [14]A. J. Browne, S. A. J. Kimber, and J. P. Attfield, Phys. Rev. Mater. 1, 052003(R) (2017).
  15. [15]S. A. J. Kimber, I. I. Mazin, J. Shen, H. O. Jeschke, S. V. Streltsov, D. N. Argyriou, R. Valentí, and D. I. Khomskii, Phys. Rev. B 89, 081408(R) (2014).
  16. [16]M. Shiomi, K. Kojima, N. Katayama, S. Maeda, J. A. Schneeloch, S. Yamamoto, K. Sugimoto, Y. Ohta, D. Locan, Y. Okamoto, and H. Sawa, Phys. Rev. B 105, L041103 (2022).
  17. [17]R. J. Koch, N. Aryal, O. Ivashko, Y. Liu, M. Abeykoon, E. D. Bauer, M. v. Zimmermann, W. Yin, C. Petrovic, and E. S. Bozin, Phys. Rev. B 106, 214516 (2022).
  18. [18]E. S. Bozin, W. G. Yin, R. J. Koch, M. Abeykoon, Y. S. Hor, H. Zheng, H. C. Lei, C. Petrovic, J. F. Mitchell, and S. J. Billinge, Nat. Commun. 10, 3638 (2019).
  19. [19]N. Katayama, K. Kojima, T. Yamaguchi, S. Hattori, S. Tamura, K. Ohara, S. Kobayashi, K. Sugimoto, Y. Ohta, K. Saitoh, and H. Sawa, npj Quantum Mater. 6, 16 (2021).
  20. [20]S. Tsorige, T. Hattori, K. Kodama, T. Honda, H. Sagayama, K. Ikeda, T. Otomo, H. Nitani, H. Abe, H. Murakawa, H. Sakai, and N. Hanasaki, Phys. Rev. B 98, 134443 (2018).
  21. [21]K.-T. Ko, H.-H. Lee, D.-H. Kim, J.-J. Yang, S.-W. Cheong, M. Eom, J. Kim, R. Gammag, K.-S. Kim, H.-S. Kim, T.-H. Kim, H.-W. Yeom, T.-Y. Koo, K. H.-D., and P. J.-H., Nat. Commun. 6, 7342 (2015).
  22. [22]T. Toriyama, M. Kobori, T. Konishi, Y. Ohta, K. Sugimoto, J. Kim, A. Fujiwara, S. Pyon, K. Kudo, and M. Nohara, J. Phys. Soc. Jpn. 83, 033701 (2014).
  23. [23]S. Pyon, K. Kudo, and M. Nohara, J. Phys. Soc. Jpn. 81, 053701 (2012).
  24. [24]K. Bronsena, G. Bus, and G. Wiegers, J. Solid State Chem. 53, 415 (1984).
  25. [25]B. Brown, Acta Crystallogr. 20, 264 (1966).
  26. [26]M.-H. Whangbo and E. Canadell, J. Am. Chem. Soc. 114, 9587 (1992).
  27. [27]N. Mitsuishi, Y. Sugita, M. Bahramy, M. Kamitani, T. Sonobe, M. Sakano, T. Shimojima, H. Takahashi, H. Sakai, K. Horiba, H. Kumigashira, K. Taguchi, K. Miyamoto, T. Okuda, S. Ishiwata, Y. Motome, and K. Ishizaka, Nat. Commun. 11, 2466 (2020).
  28. [28]T. Sörgel, U. Nuss, J. abd Wedig, R. Kremer, and M. Jansen, Mater. Res. Bull. 41, 987 (2006).
  29. [29]V. Petříček, M. Dušek, P. Palatinus, and K. J. log. Z., Cryst. Mater. 229, 345 (2014).
  30. [30]K. Momma and F. Izumi, J. Appl. Crystallogr. 44, 1272 (2011).
  31. [31]R. Oishi-Tomiyasu, J. Appl. Crystallogr. 47, 593 (2014).
  32. [32]F. Izumi and K. Momma, Solid State Phenom. 130, 15 (2007).
  33. [33]V. Petkov, K. Chapagain, J. Yang, S. Shastri, and Y. Ren, Phys. Rev. B 102, 024111 (2020).
  34. [34]S. Li, Q. Dong, J. Feng, Y. Wang, M. Hou, W. Deng, R. A. Susilo, N. Li, H. Dong, S. Wan, C. Gao, and B. Chen, Inorg. Chem. 60, 7857 (2021).
  35. [35]D. Khomskii and S. Streltsov, Chemical Reviews 121, 2992 (2021).
  36. [36]M. Ito, K. Sonoda, and S. Nagata, Solid State Commun. 23, 265 (2017).
  37. [37]K. Balcerek, C. Marucha, R. Wawryk, T. Tyc, N. Matsumoto, and S. Nagata, Philos. Mag. B 79, 1021 (1999).
  38. [38]H. Kang, P. Mandal, I. Medvedeva, J. Liebe, G. Rao, K. Bärner, P. A., and G. El, J. Appl. Phys. 83, 6977 (1998).

Paper details

vlnc:W_55swk2gj
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents