betaFeedback

WorksPhysics and Astronomy

Bayesian constraints on the transport coefficients η/sη/s and ζ/sζ/s from spin polarization in relativisitic heavy-ion collisions

Abstract

Bayesian analyses in the context of relativistic heavy-ion collisions have so far relied almost exclusively on bulk hadronic observables constructed from momentum degrees of freedom to constrain the transport properties of the quark-gluon plasma. In this work, we perform the Bayesian inference after incorporating the longitudinal spin polarization of ΛΛ hyperons alongside conventional bulk measurements in Pb+Pb collisions at sNN=5.02\sqrt{s_{NN}}=5.02 TeV to constrain the shear and bulk viscosity to entropy density ratios, η/sη/s and ζ/sζ/s. We demonstrate that the inclusion of spin polarization, which provides complementary sensitivity to the space-time structure and vorticity of the medium, shifts the posterior distribution of ζ/sζ/s toward larger values, although current uncertainties do not allow a statistically significant separation at the 68% credibility level. Nevertheless, the results establish spin polarization as a valuable probe in quantitative studies of QGP transport properties and indicate that it should be incorporated in comprehensive and systematically constrained Bayesian extractions of the medium's dynamical parameters.

Bayesian constraints on the transport coefficients η/s\eta/s and ζ/s\zeta/s from spin polarization in relativisitic heavy-ion collision

Introduction

The remarkable success of relativistic hydrodynamics in describing collective flow observables in heavy-ion collisions has led to the conclusion that the quark–gluon plasma (QGP) behaves as an almost perfect fluid [1–3]. In particular, comparisons of hydrodynamic simulations with elliptic flow measurements indicate that the specific shear viscosity, η/s\eta/s, is very small and close to the conjectured lower bound [4], making the QGP the most perfect fluid observed in nature. Despite this phenomenological success, the transport coefficients of QCD matter, including both the shear viscosity η\eta and the bulk viscosity ζ\zeta, have not yet been computed reliably from first principles in the temperature regime relevant for heavy-ion collisions. The strongly coupled and non-perturbative nature of QCD near the confinement scale renders perturbative approaches inadequate, while lattice calculations of transport coefficients remain notoriously challenging [5, 6]. Nevertheless, these coefficients play a central role in governing the space-time evolution of the plasma and are therefore essential for a quantitative characterization of the medium.

To address this difficulty, the community has adopted a top-down strategy in which transport coefficients are inferred by systematically comparing model calculations with experimental data. In recent years, Bayesian inference techniques have emerged as a powerful framework for this purpose [7, 8, 9, 10, 11, 12, 13, 14], enabling a statistically rigorous extraction of these coefficients with quantified uncertainties from a broad set of observables measured at RHIC and the LHC. These analyses have primarily relied on hadronic observables such as multiplicities, mean transverse momenta and anisotropic flow coefficients, which are sensitive to the viscous response of the medium. Such global Bayesian calibrations have significantly improved our understanding of the temperature dependence of η/s\eta/s and ζ/s\zeta/s, yet they have so far been restricted to momentum-space observables and have not incorporated spin-related measurements.

In parallel with its near-perfect fluidity, the QGP has also been identified as the most vortical fluid ever observed, as evidenced by the global spin polarization of Λ\Lambda hyperons measured in heavy-ion collisions [15]. The description of spin observables such as global polarization and spin alignment has stimulated intense theoretical activity from different perspectives (see reviews [16, 17, 18, 19] and references therein).

Recent studies have shown that Λ\Lambda polarization in heavy-ion collisions is sensitive to the medium’s transport properties [20], with the longitudinal polarization component, PzP_z, being particularly sensitive to the bulk viscosity and initial flow structure at LHC energies [21]. Moreover, extensions of kinetic theory incorporating spin degrees of freedom indicate that spin polarization itself can modify effective transport coefficients, including bulk and shear viscosity, thereby influencing the thermodynamic evolution of the fluid [22]. These developments motivate the inclusion of spin polarization measurements in a unified Bayesian analysis of QGP transport coefficients, as their demonstrated sensitivity to bulk viscosity can provide additional and independent constraints beyond conventional measurements constructed from momentum degrees of freedom. In this work, we perform a systematic Bayesian study of η/s\eta/s and ζ/s\zeta/s by incorporating longitudinal polarization data as an additional constraint alongside traditional hadronic observables. Because the computation of spin polarization requires full (3+1)(3+1)-dimensional hydrodynamic simulations and a realistic event-by-event treatment is computationally demanding, we carry out our analysis using event-averaged initial profiles. A detailed event-by-event treatment including pre-equilibrium dynamics, while important, is left for future work. To make the parameter estimation tractable, we construct a Gaussian process emulator trained on a carefully designed set of hydrodynamic calculations, which is subsequently employed within a Markov Chain Monte Carlo (MCMC) framework to extract posterior distributions of the transport coefficients. This study provides the first Bayesian constraints on QGP viscosities that explicitly incorporate spin polarization observables, thereby opening a new avenue for probing the dissipative properties of strongly interacting matter.

Notation: We work in natural units where ℏ=kB=c=1\hbar= k_{\mathrm{B}} = c = 1. We adopt the mostly negative metric convention, gμν=diag⁡(1,−1,−1,−1)g_{\mu\nu} = \operatorname{diag}(1,-1,-1,-1). Our code is written in Milne coordinates, (τ,x,y,ηs)(\tau,x,y,\eta_s), expressed in terms of Cartesian coordinates as defined as τ=t2−z2\tau= \sqrt{t^2-z^2} and ηs=12ln⁡(t+zt−z)\eta_s = \frac{1}{2}\ln\left(\frac{t+z}{t-z}\right). The inner product of two four-vectors is denoted by A⋅B=gμνAμBνA \cdot B = g_{\mu\nu}A^\mu B^\nu. The fluid velocity is denoted by uμu^\mu such that u⋅u=1u \cdot u = 1. The covariant derivative of a quantity AA is denoted by ∇μA\nabla_\mu A. The comoving derivative u⋅∂u \cdot\partial of a quantity AA is denoted by A˙=u⋅∇A\dot{A} = u \cdot\nabla A. The derivative orthogonal to the 4-velocity is written as ∇⊥μ=Δμν∇ν\nabla^\mu_{\perp} = \Delta^{\mu\nu}\nabla_\nu. For the Levi-Civitá tensor ϵμναβ\epsilon^{\mu\nu\alpha\beta}, we follow the sign convention ϵ0123=−ϵ0123=+1\epsilon^{0123} = -\epsilon_{0123} = +1.

Description of the model

The hydrodynamic evolution is governed by energy-momentum and net baryon number conservation, and which are expressed through the following continuity equations:

∇μTμν(x)=0 ,(1)\nabla_{\mu} T^{\mu\nu}(x) = 0 \,, \tag*{(1)}
∇μNμ(x)=0 .(2)\nabla_{\mu} N^{\mu}(x) = 0 \,. \tag*{(2)}

Here TμνT^{\mu\nu} is the energy-momentum tensor, and NμN^{\mu} is the (net baryon) charge current and the ∇μ\nabla_{\mu} is the covariant derivative of the spacetime. We choose to work in the Landau frame, defined by

Tμνuν=εuμ ,(3)T^{\mu\nu}u_{\nu} = \varepsilon u^{\mu} \,, \tag*{(3)}

with ε\varepsilon the local energy density and uνu^{\nu} the fluid velocity. With this choice, the energy-momentum tensor and the net baryon current are generically written as

Tμν=εuμuν−(P+Π)Δμν+πμν ,(4)T^{\mu\nu} = \varepsilon u^{\mu}u^{\nu} - (P+\Pi)\Delta^{\mu\nu} + \pi^{\mu\nu} \,, \tag*{(4)}
Nμ=nBuμ+Vμ .(5)N^{\mu} = n_{B}u^{\mu} + V^{\mu} \,. \tag*{(5)}

Here ε\varepsilon is the energy density, nBn_{B} is the net-baryon number density, PP is the thermodynamic equilibrium pressure, πμν\pi^{\mu\nu} is the shear-stress tensor, Π\Pi is the bulk viscous pressure, and VμV^{\mu} is the baryon diffusion current, and Δμν=gμν−uμuν\Delta_{\mu\nu} = g_{\mu\nu} - u_{\mu}u_{\nu} is the projector transverse to the fluid velocity uμu_{\mu}. In this study, we consider Vμ=0V^{\mu}=0 for simplicity. The equations of motion for πμν\pi^{\mu\nu} and Π\Pi are taken as [23, 24]

Π˙=ΠNS−ΠτΠ−δΠΠτΠΠθ+λΠπτΠπαβσαβ ,(6)\dot{\Pi} = \frac{\Pi_{\mathrm{NS}}-\Pi}{\tau_{\Pi}} - \frac{\delta_{\Pi\Pi}}{\tau_{\Pi}}\Pi\theta+ \frac{\lambda_{\Pi\pi}}{\tau_{\Pi}}\pi^{\alpha\beta}\sigma_{\alpha\beta} \,, \tag*{(6)}
π˙⟨αβ⟩=πNSαβ−παβτπ−δππτππαβθ+λπΠτπΠσαβ−τππτππγ⟨ασβ⟩γ+φ7τππγ⟨απβ⟩γ .(7)\dot{\pi}^{\langle\alpha\beta\rangle} = \frac{\pi_{\mathrm{NS}}^{\alpha\beta}-\pi^{\alpha\beta}}{\tau_{\pi}} - \frac{\delta_{\pi\pi}}{\tau_{\pi}}\pi^{\alpha\beta}\theta+ \frac{\lambda_{\pi\Pi}}{\tau_{\pi}}\Pi\sigma^{\alpha\beta} - \frac{\tau_{\pi\pi}}{\tau_{\pi}}\pi_{\gamma}^{\langle\alpha}\sigma^{\beta\rangle\gamma} + \frac{\varphi_{7}}{\tau_{\pi}}\pi_{\gamma}^{\langle\alpha}\pi^{\beta\rangle\gamma} \,. \tag*{(7)}

where πNSμν\pi_{\mathrm{NS}}^{\mu\nu} and ΠNS\Pi_{\mathrm{NS}} are corresponding Navier-Stokes limit given by

πNSμν=2ηΔγδμν∇γuδ=2ησμν ,ΠNS=−ζ∇γuγ=−ζθ.\pi_{\mathrm{NS}}^{\mu\nu} = 2\eta\Delta^{\mu\nu}_{\gamma\delta}\nabla^{\gamma}u^{\delta} = 2\eta\sigma^{\mu\nu} \,, \qquad\Pi_{\mathrm{NS}} = -\zeta\nabla_{\gamma}u^{\gamma} = -\zeta\theta.

Here η>0\eta>0 and ζ>0\zeta>0 denote the shear and bulk viscosities, respectively. These are treated as temperature-dependent quantities with no μB\mu_{B} dependence. We parameterize these transport coefficients using the following functional forms [11]

ηs={(η/s)min⁡+(η/s)slope(T−Tη)(TTη)(η/s)curvT≥Tη,0.06T<Tη(8)\frac{\eta}{s} = \begin{cases} (\eta/s)_{\min} + (\eta/s)_{\mathrm{slope}}(T-T_{\eta})\left(\frac{T}{T_{\eta}}\right)^{(\eta/s)_{\mathrm{curv}}} & T \ge T_{\eta},\\ 0.06 & T < T_{\eta} \end{cases} \tag*{(8)}

with Tη=154 MeVT_{\eta}=154\ \mathrm{MeV}, and

ζs=(ζ/s)max⁡1+[T−(ζ/s)T0(ζ/s)width]2.(9)\frac{\zeta}{s}=\frac{(\zeta/s)_{\max}}{1+\left[\frac{T-(\zeta/s)_{T_0}}{(\zeta/s)_{\mathrm{width}}}\right]^2}. \tag*{(9)}

In particular, we introduce three free parameters each to characterize η/s(T)\eta/s(T) and ζ/s(T)\zeta/s(T). The remaining second-order transport coefficients entering the equations (6)–(7) are not treated as independent parameters. Instead, they are fixed using expressions derived in kinetic theory [24, 25], but evaluated consistently with the chosen equation of state (discussed below). This approach reduces the dimensionality of the parameter space while retaining a physically motivated description of the system. The remaining transport coefficients are expressed below:

τΠ=5ηε+P,τΠ=ζ15(13−cs2)2(ε+P),δΠΠτΠ=23,λΠπτΠ=85(13−cs2),δππτπ=43,λπΠτπ=65,τππτπ=107,φ7τπ=970Pτπ.(10)\begin{aligned} \tau_{\Pi} &= \frac{5\eta}{\varepsilon+P}, \qquad \tau_{\Pi} = \frac{\zeta}{15\left(\frac{1}{3}-c_s^2\right)^2(\varepsilon+P)}, \\ \frac{\delta_{\Pi\Pi}}{\tau_{\Pi}} &= \frac{2}{3}, \qquad \frac{\lambda_{\Pi\pi}}{\tau_{\Pi}} = \frac{8}{5}\left(\frac{1}{3}-c_s^2\right), \qquad \frac{\delta_{\pi\pi}}{\tau_{\pi}} = \frac{4}{3}, \\ \frac{\lambda_{\pi\Pi}}{\tau_{\pi}} &= \frac{6}{5}, \qquad \frac{\tau_{\pi\pi}}{\tau_{\pi}} = \frac{10}{7}, \qquad \frac{\varphi_7}{\tau_{\pi}} = \frac{9}{70P\tau_{\pi}}. \tag*{(10)} \end{aligned}

We employ the lattice-QCD-based equation of state NEOS-BQS [26, 27, 28, 29, 30, 31] to close the hydrodynamic equations. The square of the speed of sound is computed from the equation of state as follows

cs2=∂P∂ε∣nB+nBε+P∂P∂nB∣ε.(11)c_s^2=\left.\frac{\partial P}{\partial\varepsilon}\right|_{n_B}+\frac{n_B}{\varepsilon+P}\left.\frac{\partial P}{\partial n_B}\right|_{\varepsilon}. \tag*{(11)}

As mentioned above, we do not explicitly model the pre-equilibrium stage in this work. Instead, we assume that the system has locally thermalized at a proper time τ0\tau_0, which is treated as a free parameter, after which a hydrodynamic description becomes applicable. The initial energy-momentum tensor at τ0\tau_0 is constructed using the model described in Refs [32, 33], and is given by

Tττ(τ0;x,y,ηs)=ε(τ0;x,y,ηs)cosh⁡(fY),(12)T^{\tau\tau}(\tau_0;x,y,\eta_s)=\varepsilon(\tau_0;x,y,\eta_s)\cosh(fY), \tag*{(12)}
Tτx(τ0;x,y,ηs)=Tτy(τ0;x,y,ηs)=0,(13)T^{\tau x}(\tau_0;x,y,\eta_s)=T^{\tau y}(\tau_0;x,y,\eta_s)=0, \tag*{(13)}
Tτηs(τ0;x,y,ηs)=1τ0ε(τ0;x,y,ηs)sinh⁡(fY),(14)T^{\tau\eta_s}(\tau_0;x,y,\eta_s)=\frac{1}{\tau_0}\varepsilon(\tau_0;x,y,\eta_s)\sinh(fY), \tag*{(14)}

where ff is a parameter controlling the fraction of longitudinal momentum converted into fluid velocity and YY is defined as

Y(x,y)=tanh⁡−1[TA−TBTA+TBtanh⁡(ybeam)]withybeam=cosh⁡−1(sNN2mN).Y(x,y)=\tanh^{-1}\left[\frac{T_A-T_B}{T_A+T_B}\tanh(y_{\mathrm{beam}})\right] \quad\text{with}\quad y_{\mathrm{beam}}=\cosh^{-1}\left(\frac{\sqrt{s_{\mathrm{NN}}}}{2m_N}\right).

In the above expressions, TAT_A and TBT_B are nucleus thickness functions computed from the positions of participant nucleons using the following expression

TA(B)(x,y)=∑i∈participants12πw2exp⁡[−12w2{(x−xi)2+(y−yi)2}],(15)T_{A(B)}(x,y)=\sum_{i\in\mathrm{participants}}\frac{1}{2\pi w^2}\exp\left[-\frac{1}{2w^2}\left\{(x-x_i)^2+(y-y_i)^2\right\}\right], \tag*{(15)}

where (xi,yi)(x_i,y_i) denotes the transverse coordinates of the ithi^{\mathrm{th}} nucleon and ww is the width of the nucleon.

For symmetric collisions, the initial energy density is given by

ε(τ0;x,y,ηs)=ε⊥(x,y)F(ηs),(16)\varepsilon(\tau_0;x,y,\eta_s)=\varepsilon_\perp(x,y)F(\eta_s), \tag*{(16)}

with F(ηs)F(\eta_s) defined as [32]

F(ηs)=exp⁡[−(∣ηs−(1−f)Y∣−η0)22ση2Θ(∣ηs−(1−f)Y∣−η0)].(17)F(\eta_s)=\exp\left[-\frac{\left(\lvert\eta_s-(1-f)Y\rvert-\eta_0\right)^2}{2\sigma_\eta^2}\Theta\left(\lvert\eta_s-(1-f)Y\rvert-\eta_0\right)\right]. \tag*{(17)}

Here Θ(x)\Theta(x) denotes the Heaviside function. ε⊥(x,y)\varepsilon_\perp(x,y) is obtained through the matching condition at the initial time, which results in an expression ε⊥(x,y)=NεM(x,y)\varepsilon_\perp(x,y)=\mathcal{N}_\varepsilon M(x,y), with Nε\mathcal{N}_\varepsilon expressed in terms of η0\eta_0 and ση\sigma_\eta. The choice of initial energy-momentum tensor results in zero transverse velocity, and the ηs\eta_s-component of the velocity is determined numerically by solving the implicit equation

vηs(τ0;x,y,ηs)=Tτηs(τ0;x,y,ηs)Tττ(τ0;x,y,ηs)+Peq(ε,n).v^{\eta_s}(\tau_0;x,y,\eta_s)=\frac{T^{\tau\eta_s}(\tau_0;x,y,\eta_s)}{T^{\tau\tau}(\tau_0;x,y,\eta_s)+P_{\mathrm{eq}}(\varepsilon,n)}.

For the initial baryon density, we consider the following profile

nB(τ0;x,y,ηs)=Nn[gA(ηs)TA(x,y)+gB(ηs)TB(x,y)],(18)n_B(\tau_0;x,y,\eta_s)=\mathcal{N}_n\left[g_A(\eta_s)T_A(x,y)+g_B(\eta_s)T_B(x,y)\right], \tag*{(18)}

where gA(ηs)g_A(\eta_s) and gB(ηs)g_B(\eta_s) are given by [34]:

gA(ηs)=Θ(ηs−ηB,0)exp⁡[−(ηs−ηB,0)22σB,out2]+Θ(ηB,0−ηs)exp⁡[−(ηs−ηB,0)22σB,in2],(19)g_A(\eta_s)=\Theta(\eta_s-\eta_{B,0})\exp\left[-\frac{(\eta_s-\eta_{B,0})^2}{2\sigma_{B,\mathrm{out}}^2}\right]+\Theta(\eta_{B,0}-\eta_s)\exp\left[-\frac{(\eta_s-\eta_{B,0})^2}{2\sigma_{B,\mathrm{in}}^2}\right], \tag*{(19)}
gB(ηs)=Θ(ηs+ηB,0)exp⁡[−(ηs+ηB,0)22σB,in2]+Θ(−ηB,0−ηs)exp⁡[−(ηs+ηB,0)22σB,out2].(20)g_B(\eta_s)=\Theta(\eta_s+\eta_{B,0})\exp\left[-\frac{(\eta_s+\eta_{B,0})^2}{2\sigma_{B,\mathrm{in}}^2}\right]+\Theta(-\eta_{B,0}-\eta_s)\exp\left[-\frac{(\eta_s+\eta_{B,0})^2}{2\sigma_{B,\mathrm{out}}^2}\right]. \tag*{(20)}

The normalization constant Nn\mathcal{N}_n is chosen by demanding that

∫τ0dx dy dηs nB(τ0;x,y,ηs)=Npart(21)\int_{\tau_0} dx\,dy\,d\eta_s\ n_B(\tau_0;x,y,\eta_s)=N_{\mathrm{part}} \tag*{(21)}

where NpartN_{\mathrm{part}} denotes the total number of participants. The above condition gives

Nn=1τ02π1σB,in+σB,out.(22)\mathcal{N}_{n}=\frac{1}{\tau_{0}}\sqrt{\frac{2}{\pi}}\frac{1}{\sigma_{B,\mathrm{in}}+\sigma_{B,\mathrm{out}}}. \tag*{(22)}

We fix the parameter σB,out=0.1\sigma_{B,\mathrm{out}}=0.1. For the net charge density profile, we consider

nQ(x,y)≈0.4 nB(x,y)n_{Q}(x,y)\approx0.4\,n_{B}(x,y)

The hydrodynamic evolution is stopped at the particlization (or switching) hypersurface, defined by a constant energy density ϵsw\epsilon_{\mathrm{sw}}. This hypersurface is obtained using the CORNELIUS code [35]. At this hypersurface, we use a hadron sampler [36, 37, 38] to generate particles from fluid elements. The resulting particle set serves as input to the SMASH transport model [39, 40] for subsequent hadron interactions and decays. We compute the spin polarization of Λ\Lambda-hyperons on the switching hypersurface, including the contributions from thermal vorticity,

ϖνρ=12(∇ρβν−∇νβρ)\varpi_{\nu\rho}=\frac{1}{2}\left(\nabla_{\rho}\beta_{\nu}-\nabla_{\nu}\beta_{\rho}\right)

and thermal shear,

ξνρ=12(∇ρβν+∇νβρ)\xi_{\nu\rho}=\frac{1}{2}\left(\nabla_{\rho}\beta_{\nu}+\nabla_{\nu}\beta_{\rho}\right)

following the prescription of Refs. [41, 42].1 The spin four-vector is written as

Sμ(p)=Sϖμ(p)+Sξμ(p),(23)S^{\mu}(p)=S^{\mu}_{\varpi}(p)+S^{\mu}_{\xi}(p), \tag*{(23)}

with

Sϖμ(p)=−18mΛϵμνρσpσ∫dΣ⋅p f0(1−f0)ϖνρ∫dΣ⋅p f0,(24)S^{\mu}_{\varpi}(p)=-\frac{1}{8m_{\Lambda}}\epsilon^{\mu\nu\rho\sigma}p_{\sigma}\frac{\int d\Sigma\cdot p\,f_{0}(1-f_{0})\varpi_{\nu\rho}}{\int d\Sigma\cdot p\,f_{0}}, \tag*{(24)}
Sξμ(p)=−ϵμνρσpσpλ4mΛ p⋅t^∫dΣ⋅p f0(1−f0)t^νξλρ∫dΣ⋅p f0.(25)S^{\mu}_{\xi}(p)=-\frac{\epsilon^{\mu\nu\rho\sigma}p_{\sigma}p^{\lambda}}{4m_{\Lambda}\,p\cdot\hat{t}}\frac{\int d\Sigma\cdot p\,f_{0}(1-f_{0})\hat{t}_{\nu}\xi_{\lambda\rho}}{\int d\Sigma\cdot p\,f_{0}}. \tag*{(25)}

In the above equation, f0f_{0} is the relativistic Fermi-Dirac distribution with four-temperature β(x)\beta(x) and the appropriate combination of chemical potentials for the Λ\Lambda, Λˉ\bar{\Lambda} hyperons; in the shear contribution, t^μ\hat{t}^{\mu} is the time unit vector t^μ=(1,0,0,0)\hat{t}^{\mu}=(1,0,0,0) in the centre-of-mass collision frame. At very high collision energies, the baryon chemical potential is very small and satisfies μB≈0\mu_B \approx0, such that energy-density becomes primarily a function of temperature. In this limit, the constant energy density switching hypersurface can be approximated by a constant temperature hypersurface after neglecting the gradients of temperature on the hypersurface. This allows the temperature to be factored out of the surface integrals in the density operator. This is known as the isothermal approximation [42]. Under this approximation, defining Ξμν=12∂μuν\Xi^{\mu\nu} = \frac{1}{2}\partial^{\mu}u^{\nu} and ωμν=12∂[μuν]\omega^{\mu\nu} = \frac{1}{2}\partial^{[\mu}u^{\nu]}, Eqs. (24) reduce to

Sωμ(p)=−18mΛϵμνρσpσ∫dΣ⋅p f0(1−f0)ωνρT∫dΣ⋅p f0(26)S_{\omega}^{\mu}(p)=-\frac{1}{8m_{\Lambda}}\epsilon^{\mu\nu\rho\sigma}p_{\sigma}\frac{\int d\Sigma\cdot p\,f_{0}(1-f_{0})\omega_{\nu\rho}}{T\int d\Sigma\cdot p\,f_{0}} \tag*{(26)}
Sξμ(p)=−ϵμνρσpσpλ4mΛ p⋅t^∫dΣ⋅p f0(1−f0)t^νΞλρT∫dΣ⋅p f0(27)S_{\xi}^{\mu}(p)=-\frac{\epsilon^{\mu\nu\rho\sigma}p_{\sigma}p^{\lambda}}{4m_{\Lambda}\,p\cdot\hat{t}}\frac{\int d\Sigma\cdot p\,f_{0}(1-f_{0})\hat{t}_{\nu}\Xi_{\lambda\rho}}{T\int d\Sigma\cdot p\,f_{0}} \tag*{(27)}

The spin vector in the Λ\Lambda rest frame, S∗μ=(0,S∗)S^{*\mu}=(0,\mathbf{S}^{*}) is obtained from the laboratory frame spin vector Sμ=(S0,S)S^{\mu}=(S^{0},\mathbf{S}) as follows:

S∗=S−p⋅SE(E+mΛ)p\mathbf{S}^{*}=\mathbf{S}-\frac{\mathbf{p}\cdot\mathbf{S}}{E(E+m_{\Lambda})}\mathbf{p}

where E=p0E=p^{0} is the Λ\Lambda energy in the laboratory frame. Finally, the spin polarization vector is given by P=2S∗\mathbf{P}=2\mathbf{S}^{*}. For simplicity and to reduce computational cost, feed-down contributions from resonance decays are neglected in the present analysis. This is a reasonable approximation, as it has been shown that the inclusion of feed-down corrections does not lead to significant changes in the resulting Λ\Lambda polarization relative to the case of entirely primary production [21].

Model Parameters

A full (3+1)(3+1)-dimensional event-by-event simulation of Pb+Pb collisions at sNN=5.02\sqrt{s_{NN}}=5.02 TeV is computationally demanding, particularly for central collisions where the fireball lifetime is comparatively long and particle multiplicities are large. The computational cost is further amplified by the particlization (sampler) stage and the subsequent hadronic transport evolution. To render the Bayesian analysis feasible while maintaining a physically well-motivated framework, we adopt a set of simplifications. We neglect pre-equilibrium dynamics and initialize hydrodynamics at a fixed proper time τ0\tau_{0}. The initial condition model contains six (f,ση,η0,ηB,0,σB,in,σB,out)(f,\sigma_{\eta},\eta_{0},\eta_{B,0},\sigma_{B,\mathrm{in}},\sigma_{B,\mathrm{out}}) parameters and is constructed from thickness functions in which the smoothing of local hotspots is regulated by the nucleon width ww. For each parameter set, we generate multiple fluctuating initial configurations to obtain the energy-momentum tensor TμνT^{\mu\nu} for individual events, and subsequently perform event averaging to produce a smooth TμνT^{\mu\nu} profile for hydrodynamic evolution. The transport sector includes six parameters describing the temperature dependence of η/s\eta/s and ζ/s\zeta/s (three each), together with the switching energy density, εsw\varepsilon_{\mathrm{sw}}, defining the transition from hydrodynamics to the hadronic afterburner, resulting in a total of fifteen model parameters.

We find that two parameters, ww and σB,out\sigma_{\mathrm{B,out}}, have negligible impact on the calibrated observables within reasonable ranges; these are therefore fixed to w=0.9w = 0.9 and σB,out=0.2\sigma_{\mathrm{B,out}} = 0.2, reducing the effective dimensionality for the analysis to thirteen parameters. For example, in Figure 1, we show the dependence of the lower bound of the scaled multiplicity range on ww for various centrality classes. The bound remains approximately constant over a wide range of ww, demonstrating that the centrality selection is largely insensitive to this parameter. We adopt uniform prior distributions for all model parameters within their respective ranges, reflecting minimal prior knowledge. The prior ranges for the parameters are summarized in Table I.

Scaled multiplicity vs nucleon width

Figure 1. Scaled multiplicity vs nucleon width

ParameterPrior range (min–max)MAP value with PzP_z (rounded to two decimal places)MAP value without PzP_z (rounded to two decimal places)
η0\eta_01.5–3.52.542.50
ση\sigma_\eta1.0–2.51.381.44
ηB0\eta_{B0}4.0–6.05.154.57
σB,in\sigma_{B,\mathrm{in}}1.8–3.02.142.74
ff0.0–0.40.170.16
τ0\tau_0 [fm]0.6–1.20.831.0
(η/s)min⁡(\eta/s)_{\min}0.05–0.250.070.06
(η/s)slope(\eta/s)_{\mathrm{slope}}0.0–3.00.761.44
(η/s)curv(\eta/s)_{\mathrm{curv}}-1.0–1.00.070.23
(ζ/s)max⁡(\zeta/s)_{\max}0.0–0.30.160.12
(ζ/s)width(\zeta/s)_{\mathrm{width}}0.0–0.30.190.07
(ζ/s)T0(\zeta/s)_{T0}0.1–0.30.160.15
ϵsw\epsilon_{\mathrm{sw}} [GeV fm−3^{-3}]0.35–0.650.540.48

Table I. Prior range and MAP values of the parameters

Experimental data

We consider nine sets of experimental data across seven centrality classes: 0-10%, 10-20%, 20-30%, 30-40%, 40-50%, 50-60%, and 60-70%. The observables included in the Bayesian analysis are listed below: (i) Charged particle pseudorapidity density, dNchdη\frac{dN_{\mathrm{ch}}}{d\eta} from Refs. [45, 46],

(ii) Identified-particle rapidity densities, dNdy∣π++π−\left.\frac{dN}{dy}\right|_{\pi^{+}+\pi^{-}}, dNdy∣K++K−\left.\frac{dN}{dy}\right|_{K^{+}+K^{-}}, and dNdy∣p+pˉ\left.\frac{dN}{dy}\right|_{p+\bar{p}} from Ref. [46],

(iii) Mean transverse momentum of identified particles ⟨pT⟩π++π−\langle p_{T}\rangle_{\pi^{+}+\pi^{-}}, ⟨pT⟩K++K−\langle p_{T}\rangle_{K^{+}+K^{-}}, and ⟨pT⟩p+pˉ\langle p_{T}\rangle_{p+\bar{p}} from Ref. [46],

(iv) Elliptic flow coefficient v2v_{2} of charged particles from Ref. [47],

(v) Longitudinal spin polarization PzP_{z} of Λ\Lambda hyperons from Ref. [48].

The experimental data listed in items (i)-(iv) are not available in the 0-10% centrality class but are reported separately for the 0-5% and 5-10% centrality bins. We therefore merge these two bins to construct the corresponding 0-10% observables following the procedure described below.

The combined experimental values of dNchdη\frac{dN_{\mathrm{ch}}}{d\eta} and dNdy\frac{dN}{dy} are taken as the arithmetic mean of the corresponding values in the two centrality classes, while the associated uncertainty is taken to be the larger of the two quoted uncertainties. For the mean transverse momentum, the value in the merged centrality class is computed as

⟨pT⟩=(dNdy)C1⟨pT⟩1+(dNdy)C2⟨pT⟩2(dNdy)C1+(dNdy)C2\langle p_T\rangle= \frac{ \left(\frac{dN}{dy}\right)_{C_1}\langle p_T\rangle_1+ \left(\frac{dN}{dy}\right)_{C_2}\langle p_T\rangle_2 }{ \left(\frac{dN}{dy}\right)_{C_1}+ \left(\frac{dN}{dy}\right)_{C_2} }

where C1C_1 and C2C_2 denote the 0-5% and 5-10% centrality classes, respectively. The corresponding uncertainty is taken as the larger of the two quoted uncertainties.

For the elliptic flow coefficient v2v_2, an additional step is required. Our hydrodynamic simulations employ event-averaged smooth initial profiles and therefore predict the mean elliptic flow ⟨v2⟩\langle v_2\rangle, while experimental measurements include contributions from event-by-event flow fluctuations. To make the experimental data compatible with our model, we follow Ref. [49] and characterize the magnitude of flow fluctuations by a variance σ2\sigma^2. The elliptic flow coefficients measured using the two- and four-particle cumulant methods satisfy

v2{2}2=⟨v2⟩2+σ2 ,v2{4}2≈⟨v2⟩2−σ2v_2\{2\}^2=\langle v_2\rangle^2+\sigma^2 \,,\qquad v_2\{4\}^2\approx\langle v_2\rangle^2-\sigma^2

From these relations, the mean elliptic flow is obtained as

⟨v2⟩=v2{2}2+v2{4}22\langle v_2\rangle=\sqrt{\frac{v_2\{2\}^2+v_2\{4\}^2}{2}}

Measurements of v2{2}v_2\{2\} and v2{4}v_2\{4\} are available for Pb+Pb collisions at sNN=5.02\sqrt{s_{NN}} = 5.02 TeV [47]. We use these measurements to extract ⟨v2⟩\langle v_2\rangle in each experimental centrality bin, with uncertainties propagated in quadrature. The values in the 0–5% and 5–10% classes are then merged using the same procedure as for the mean transverse momentum.

Computational details

The initial condition model employed in this work satisfies the scaling ε⊥∼TATB\varepsilon_\perp\sim\sqrt{T_A T_B} at high collision energies. The TRENTo model [50] provides this behavior for the reduced thickness parameter p=0p = 0. We therefore use the TRENTo code [51] to construct the initial conditions and to perform centrality selection.

We generate 10510^5 minimum-bias events in the impact-parameter range 0–20 fm using the following TRENTo configuration:

cross-section = 7.0
normalization = 1.0
reduced-thickness = 0.0
fluctuation = 1.0
nucleon-min-dist = 0.0
nucleon-width = 0.9
b-min = 0.0
b-max = 20.0
grid-max = 10.0
grid-step = 0.2

For each event, we store the transverse coordinates of the participating nucleons and compute the integrated reduced thickness ∫d2x⊥TATB\int d^2 x_\perp\sqrt{T_A T_B}. We assume the final-state charged-particle multiplicity to be proportional to this quantity and sort the events in descending order of the integrated reduced thickness. Since centrality classes are defined by percentiles of the multiplicity distribution, the overall normalization (set here to unity) does not affect the centrality determination.

Centrality classes are defined by selecting fixed percentiles of the sorted event ensemble in intervals of 10%. For each centrality class, we select 5000 events from the minimum-bias sample. For each selected event, the nuclear thickness functions are constructed using Eq. (15), and the corresponding energy–momentum tensor TμνT^{\mu\nu} is evaluated. The initial condition for the hydrodynamic evolution is then obtained by averaging over all events in a given centrality class, yielding a smooth, event-averaged energy–momentum tensor ⟨Tμν⟩\langle T^{\mu\nu}\rangle.

The viscous hydrodynamics is solved numerically in full (3+1)(3+1) dimensions using the code developed in Refs. [20, 52, 53]. The code, written in Fortran, employs the Godunov-type relativistic Harten-Lax-van Leer-Einfeldt (HLLE) approximate Riemann solver to compute numerical fluxes at fluid cell interfaces, as described in Refs. [54, 55]. Although inspired by the publicly available vHLLE framework [55, 56], the code includes several extensions, such as multi-threaded parallelization via OpenMP [57] and the evolution of spin degrees of freedom within a spin-hydrodynamic framework [58]. For the present analysis, only the background viscous hydrodynamic evolution is employed.

Our analysis is based on a finite ensemble of model evaluations performed at design points in the model parameter space. The design matrix Xall\mathbf{X}_{\mathrm{all}} is constructed using maximin Latin hypercube sampling (LHS), which provides an approximately space-filling coverage of the multidimensional parameter space [7, 11, 59]. The corresponding simulation outputs Yall\mathbf{Y}_{\mathrm{all}} contain the predicted observables for Pb+Pb collisions at sNN=5.02\sqrt{s_{NN}}=5.02 TeV. The observable vector entering the Bayesian analysis has dimension nobs=63n_{\mathrm{obs}}=63, corresponding to nine observables evaluated in seven centrality classes (refer § 1.4).

Specifically, the Latin hypercube samples are generated in the unit hypercube [0,1]d[0,1]^d with d=13d=13 using the lhs package in R [60], and are subsequently mapped to the physical model parameters by linearly scaling each dimension to its corresponding parameter range. This procedure corresponds to assuming independent uniform prior distributions for all model parameters within the specified bounds. The design consists of a total of 800 parameter sets. Fixed random seeds are used in the LHS construction to ensure reproducibility. We verify that the chosen prior ranges (listed in Table I) encompass the experimental data, as illustrated in Figure 3-Figure 5.

Figure 3. Top panel shows the model predictions obtained from parameter values sampled uniformly from the prior ranges for Pb+Pb collisions at sNN=5.02\sqrt{s_{NN}} = 5.02 TeV. Bottom panel compares the experimental data with model predictions evaluated at the median of the posterior parameter distribution in the analysis including spin polarization. The band represents the corresponding 1σ1\sigma posterior predictive uncertainty.

Figure 5. Left panel shows the model predictions obtained from parameter values sampled uniformly from the prior ranges for Pb+Pb collisions at sNN=5.02\sqrt{s_{NN}} = 5.02 TeV for longitudinal component of spin polarization. The right panel instead shows the experimental data with model predictions evaluated at the median of the posterior parameter distribution in the analysis including spin polarization for the longitudinal polarization.

The design points and their corresponding model outputs are stored in separate data files and are read into the analysis framework as input-output pairs. Prior to training the emulator, design points for which one or more observables are undefined or contain non-numerical values are removed from the dataset. In total, seven such design points are excluded, leaving Ntot=793N_{\mathrm{tot}}=793 valid samples.

The filtered dataset is divided into a training set and an independent validation set. A subset of 100 design points is randomly selected and reserved exclusively for validation, while the remaining samples are used for training the Gaussian process model emulator (discussed below). The random selection is performed using a fixed random seed to ensure reproducibility of the training-validation split. The training dataset (X,Y)(\mathbf{X},\mathbf{Y}) is used to construct the emulator, while the validation dataset (Xval,Yval)(\mathbf{X}_{\mathrm{val}},\mathbf{Y}_{\mathrm{val}}) is employed to test the emulator’s accuracy and robustness.

The model outputs are standardized to have zero mean and unit variance for each observable. This preprocessing is performed using a linear rescaling,

Yi→Yi−μiσi=YiscaledY_i \to\frac{Y_i-\mu_i}{\sigma_i}=Y_i^{\mathrm{scaled}}

where μi=⟨Yi⟩\mu_i=\langle Y_i\rangle and σi\sigma_i denote the sample mean and standard deviation of the ithi^{\mathrm{th}} observable across the training dataset. To reduce the dimensionality of the observable space and remove correlations among observables, we perform a principal component analysis (PCA) on the standardized model outputs using the scikit-learn Python library [61]. The full PCA spectrum is first computed to quantify the fraction of total variance carried by each principal component. We retain the leading nPC=3n_{\mathrm{PC}}=3 principal components, which together account for a 97.06% of the total variance when performing analysis including spin polarization and 98.19% when performing analysis excluding spin polarization. The remaining variance is incorporated into the likelihood function as truncation uncertainty, denoted as Σtrunc\Sigma_{\mathrm{trunc}}, and therefore does not bias the parameter inference. Including additional principal components was found to degrade the emulator calibration, as the subleading modes are dominated by statistical noise and are not reliably constrained by the training data, leading to unstable Gaussian-process hyperparameters and spurious constraints in the Bayesian analysis.

The PCA yields a transformation matrix W\mathbf{W} of dimension npc×nobsn_{\mathrm{pc}} \times n_{\mathrm{obs}} which operates on standardized model outputs and projects them onto the retained principal components. In the present analysis npc=3n_{\mathrm{pc}} = 3, resulting in a three-dimensional principal-component representation. The transformation reads

Z=WYscaled\mathbf{Z} = \mathbf{W}\mathbf{Y}^{\mathrm{scaled}}

The experimental observables are treated consistently within the same linear framework. Let Yexp\mathbf{Y}_{\mathrm{exp}} denote the vector of experimental mean values and let Σexp\Sigma_{\mathrm{exp}} denotes the covariance matrix of experimental uncertainties in observable space, assumed diagonal due to the absence of bin-to-bin correlations. The experimental observables are first standardized

Yexpscaled=S(Yexp−μ),S=diag⁡(1/σi)\mathbf{Y}_{\mathrm{exp}}^{\mathrm{scaled}} = \mathbf{S}(\mathbf{Y}_{\mathrm{exp}} - \boldsymbol{\mu}), \qquad\mathbf{S} = \operatorname{diag}(1/\sigma_i)

Projection onto principal-component space yields

Zexp=WYexpscaled\mathbf{Z}_{\mathrm{exp}} = \mathbf{W}\mathbf{Y}_{\mathrm{exp}}^{\mathrm{scaled}}

and the corresponding covariance matrix transforms as

ΣexpPC=W S Σexp ST WT\Sigma_{\mathrm{exp}}^{\mathrm{PC}} = \mathbf{W}\,\mathbf{S}\,\Sigma_{\mathrm{exp}}\,\mathbf{S}^{\mathsf{T}}\,\mathbf{W}^{\mathsf{T}}

The log-likelihood function used for Bayesian inference is given by

log⁡L(θ)=−12[(Z−Zexp)TΣtot−1(Z−Zexp)+log⁡det⁡Σtot]+constant\log\mathcal{L}(\theta) = -\frac{1}{2}\left[(\mathbf{Z}-\mathbf{Z}_{\mathrm{exp}})^{\mathsf{T}}\Sigma_{\mathrm{tot}}^{-1}(\mathbf{Z}-\mathbf{Z}_{\mathrm{exp}}) + \log\det\Sigma_{\mathrm{tot}}\right] + \text{constant}

where the total covariance in principal-component space is

Σtot=Σemu+ΣexpPC+Σtrunc\Sigma_{\mathrm{tot}} = \Sigma_{\mathrm{emu}} + \Sigma_{\mathrm{exp}}^{\mathrm{PC}} + \Sigma_{\mathrm{trunc}}

with Σemu\Sigma_{\mathrm{emu}} denoting the emulator predictive covariance in principal-component space. Each retained principal component is emulated independently using a Gaussian process regressor (GPR) from the scikit-learn library [61, 62]. We employ a composite kernel consisting of a constant kernel multiplied by a squared-exponential (RBF) kernel, augmented by a white-noise term to account for residual numerical noise [63]. The characteristic length scales of the RBF kernel are initialized and bounded according to the physical ranges of the model parameters. Emulator performance is assessed using a train-test split of the design set. The coefficient of determination implemented as GPR.score in the scikit-learn library for the three retained principal components is found to be 99.86%, 96.88%, and 95.97%, respectively for the analysis with spin-polarization data. After confirming satisfactory predictive performance, the Gaussian process emulator is retrained using the full design dataset for the subsequent Bayesian analysis. The accuracy of the full emulator is further evaluated by reconstructing the observables at the validation design points (Xval\mathbf{X}_{\mathrm{val}},Yval\mathbf{Y}_{\mathrm{val}}). Predictions obtained in principal-component space are mapped back to observable space using the in-

verse PCA transformation followed by inverse scaling. Emulator performance is quantified using the root-mean-square error (RMSE) in observable space defined as

RMSE=⟨(YEmulated−YTrue)2⟩\mathrm{RMSE} = \sqrt{\left\langle\left(Y_{\mathrm{Emulated}} - Y_{\mathrm{True}}\right)^2 \right\rangle}

where YTrue=YvalY_{\mathrm{True}} = Y_{\mathrm{val}} denotes the model output. When normalized by the standard deviation of the validation data in observable space, we obtain an overall normalized RMSE of 3.5%.

To further assess emulator robustness, we perform a five-fold cross-validation of the Gaussian-process emulators in principal-component space. The design set is randomly partitioned into five subsets, and for each split the emulator is trained on four subsets and evaluated on the remaining one. For each principal component, we analyze the normalized residuals (ZZ-scores) [64], defined as the difference between the true and emulated values divided by the predicted emulator uncertainty. For a well-calibrated emulator, these residuals are expected to follow a standard normal distribution. Our results for the aggregated ZZ-score distribution is shown in the top panel of Figure 2 and is found to be consistent with a standard normal distribution. We additionally evaluate coverage probabilities, confirm

Figure 2. (Top) Distribution of normalized residuals (ZZ-scores) for the retained principal components. The dashed curve indicates a standard normal distribution. (Bottom) Comparison between the true model values and emulator predictions for the three principal components in the analysis including spin polarization. The diagonal line denotes perfect agreement.

Figure 4. Top panel shows the model predictions obtained from parameter values sampled uniformly from the prior ranges for Pb+Pb collisions at sNN=5.02\sqrt{s_{NN}} = 5.02 TeV for ⟨pT⟩\langle p_T\rangle and v2v_2. Bottom panel compares the experimental data with model predictions evaluated at the median of the posterior parameter distribution in the analysis including spin polarization for ⟨pT⟩\langle p_T\rangle and v2v_2. The band represents the corresponding 1σ1\sigma posterior predictive uncertainty.

ing that approximately 69.4% and 95% of the residuals fall within the corresponding one- and two-sigma confidence intervals. Finally, direct comparison between true and emulated principal-component values are performed to verify the absence of systematic bias as shown in the bottom panel of Figure 2.

The trained Gaussian-process emulators are used to predict the principal components for any parameter vector θ\theta, providing both the mean and diagonal emulator covariance. Predictions are mapped back to observable space via inverse PCA and inverse standardization, with emulator uncertainties propagated accordingly, including a truncation term for discarded variance, as discussed above. Uniform priors are assumed within the predefined parameter bounds, and the likelihood is defined as a multivariate Gaussian in principal-component space, incorporating emulator, experimental, and truncation covariances. Posterior distributions of the model parameters are sampled using the parallel-tempered MCMC algorithm implemented in ptemcee library [65, 66], with multiple temperatures and walkers to ensure efficient exploration. After burn-in, the converged chains are used to infer the posterior distributions of all model parameters.

Results

To illustrate the outcome of the Bayesian parameter inference, we evaluate the emulator at the median of the posterior parameter distribution and compare the resulting model predictions with experimental data across all observables and centrality classes as shown in Figure 3-Figure 5. The emulator provides the mean prediction in observable space together with the associated emulator uncertainty, obtained by propagating Gaussian-process uncertainties from principal-component space and including the PCA truncation variance. The shaded bands in the figures indicate the resulting 1σ1\sigma uncertainty on the model prediction. For comparison, we also show predictions obtained from parameter values sampled uniformly within the prior ranges, highlighting the degree to which the data constrain the model parameters. These comparisons demonstrate that the posterior-median parameter set yields a significantly improved description of the measured observables.

To assess the overall consistency of the inferred model with experimental data, we perform posterior predictive checks. While the posterior-median comparison described above illustrates the predictions corresponding to a representative inferred parameter set, posterior predictive checks probe the full predictive distribution of the model and provide a consistency test of the Bayesian inference. Parameter samples are drawn from the posterior distribution and propagated through the trained emulator to generate replicated datasets in the observable space. The resulting ensemble of replicated observables is used to construct pointwise posterior predictive intervals, defined by the 5th and 95th percentiles, together with the median prediction. These intervals are compared directly to the experimental measurements across all observables and centrality classes, as shown in Figure 6. Good agreement of the data with the posterior predictive bands indicates that the inferred parameter distributions provide a statistically consistent description of the measured observables. We emphasize that this procedure tests the full predictive distribution of the model rather than a single best-fit parameter set.

Figure 6. Posterior predictive checks for the Bayesian analysis of Pb+Pb collisions at sNN=5.02\sqrt{s_{NN}} = 5.02 TeV. The shaded bands correspond to the 5th–95th percentile intervals of the posterior predictive distribution obtained by propagating posterior parameter samples through the emulator trained including spin polarization.. The solid line indicates the median prediction. Experimental data are shown for comparison.

Using the posterior samples obtained from the Bayesian analysis, we reconstruct the temperature dependence of the shear and bulk viscosity coefficients in Figure 7-Figure 8. For each coefficient, we evaluate the functions Eqs. (8)-(9) over a dense temperature grid using a large ensemble of posterior samples and construct pointwise credibility intervals. The median and maximum-a-posteriori (MAP) estimates are shown alongside the 60%, 90%, and 100% credible intervals. We find that the extracted shear viscosity is essentially unchanged when longitudinal spin polarization data are included in the Bayesian analysis, indicating that

Figure 7. Posterior distributions of the temperature-dependent shear viscosity obtained from the analysis with and without including PzP_z in the left and right panels, respectively. The median estimate is shown as a solid line and the maximum-a-posteriori (MAP) estimate as a dashed line. The shaded bands correspond to the 60%, 90%, and 100% credible intervals, with decreasing color intensity indicating increasing credibility level.

Figure 8. Posterior distributions of the temperature-dependent bulk viscosity obtained from the analysis with and without including PzP_z in the left and right panels, respectively. The median estimate is shown as a solid line and the maximum-a-posteriori (MAP) estimate as a dashed line. The shaded bands correspond to the 60%, 90%, and 100% credible intervals, with decreasing color intensity indicating increasing credibility level.

Figure 10. Marginalized one- and two-dimensional posterior distributions of selected model parameters inferred from MCMC sampling using an emulator trained on bulk and spin polarization observable. The diagonal panels show one-dimensional marginal posteriors, while the off-diagonal panels display the corresponding two-dimensional joint posterior distributions. Dashed lines indicate posterior median values, and the quoted uncertainties represent central 90% Bayesian credible intervals.

bulk hadronic observables already provide strong constraints on shear transport. In contrast, the median value of the bulk viscosity is significantly enhanced-by approximately a factor of two-when spin polarization data are incorporated, although the MAP estimates remain comparable in the two analyses. Notably, both parameter analyses yield a satisfactory

Figure 11. Marginalized one- and two-dimensional posterior distributions of selected model parameters inferred from MCMC sampling using an emulator trained on only bulk observables without spin. The diagonal panels show one-dimensional marginal posteriors, while the off-diagonal panels display the corresponding two-dimensional joint posterior distributions. Dashed lines indicate posterior median values, and the quoted uncertainties represent central 90% Bayesian credible intervals.

description of conventional bulk observables, suggesting that spin polarization provides complementary sensitivity primarily to bulk viscous effects rather than shear transport. This behavior is consistent with the expectation that longitudinal component of spin polarization is more sensitive to the space-time structure of the expansion dynamics of the medium, which are directly influenced by bulk viscosity.

To visualize the inferred parameter correlations and the extent to which individual model parameters are constrained by the data, we construct corner (pairwise correlation) plots from the posterior samples, shown in Figure 9–Figure 12. For clarity, the parameters are separated into two groups: parameters associated with the initial condition model, initial hydrodynamic time τ0\tau_0, and switching energy density εsw\varepsilon_{\mathrm{sw}}; and parameters governing the temperature dependence of the shear and bulk viscosities. For each group, a random subset of posterior samples is used to generate kernel-density estimates of the one- and two-dimensional marginal distributions, with median values and central 90% credible intervals indicated.

Figure 9. Marginalized one- and two-dimensional posterior distributions of selected model parameters inferred from MCMC sampling using an emulator trained on bulk and spin polarization observable. The diagonal panels show one-dimensional marginal posteriors, while the off-diagonal panels display the corresponding two-dimensional joint posterior distributions. Dashed lines indicate posterior median values, and the quoted uncertainties represent central 90% Bayesian credible intervals.

Figure 12. Marginalized one- and two-dimensional posterior distributions of selected model parameters inferred from MCMC sampling using an emulator trained on only bulk observables without spin. The diagonal panels show one-dimensional marginal posteriors, while the off-diagonal panels display the corresponding two-dimensional joint posterior distributions. Dashed lines indicate posterior median values, and the quoted uncertainties represent central 90% Bayesian credible intervals.

We observe that parameters primarily related to the initial condition and hydrodynamic initialization exhibit nearly flat marginal distributions with broad, multi-modal structures and weak correlations. This indicates that, within the present analysis, these parameters are only weakly constrained by the considered experimental observables. Such behavior is expected, as the bulk hadronic observables and longitudinal spin polarization included here are predominantly sensitive to the medium’s transport properties rather than to detailed features of the early-time dynamics or particlization hypersurface.

In contrast, the posterior distributions of the parameters related to transport coefficients remain broadly consistent between the two analyses. The inclusion of longitudinal spin polarization does not lead to a substantial narrowing or broadening of the credible intervals, or to dramatic changes in the correlation structure among transport parameters. However, it does shift the inferred bulk-viscosity distribution toward larger values. In particular, the median of ζ/s(T)\zeta/s(T) increases by approximately a factor of two when PzP_z data are incorporated, while the MAP estimate exhibits a modest upward shift. The corresponding 68% credible intervals retain significant overlap beyond T≳300T \gtrsim300 MeV, indicating that the two analyses remain statistically compatible within uncertainties. These results suggest that longitudinal spin polarization provides complementary sensitivity to bulk viscous effects. In contrast, the extracted shear viscosity remains largely unchanged, reinforcing the conclusion that conventional bulk observables already provide strong constraints on shear transport.

As an additional consistency check of our analysis, we use the median parameter values extracted from the corresponding posterior distributions to compute differential observables, including the transverse momentum spectra of pions, kaons, and protons, as well as the transverse momentum dependence of the charged-particle elliptic flow coefficient v2v_2, shown in Figure 13 and Figure 14. We find that these differential hadronic observables are equally well described by both sets of extracted parameters, namely those obtained from analyses with and without spin polarization data. We additionally evaluate the transverse momentum and azimuthal angle dependence of the longitudinal spin polarization PzP_z shown in Figure 15. The results indicate that the experimentally observed sign of PzP_z is correctly reproduced only by the parameter set obtained from the Bayesian analysis that includes spin polarization observables. This parameter set corresponds to a bulk viscosity approximately a factor of two larger than that obtained in the analysis without spin observable. These findings further emphasize that spin polarization observables provide complementary and nontrivial constraints on the bulk viscosity of the QCD medium.

Figure 13. Transverse momentum spectra of (left) charged pions and (right) charged kaons in Pb-Pb collisions at sNN=5.02\sqrt{s_{NN}} = 5.02 TeV for different centrality classes. Shown are model results obtained using median values of parameters extracted from Bayesian analyses with (solid lines) and without (dashed lines) inclusion of spin polarization observable. Experimental data is taken from Ref. [46].

Transverse momentum spectra of protons and anti-protons and elliptic flow coefficient of charged hadrons

Figure 14. Transverse momentum spectra of (left) protons and anti-protons and (right) the elliptic flow coefficient, v2v_2, of charged hadrons in Pb-Pb collisions at sNN=5.02\sqrt{s_{NN}} = 5.02 TeV for different centrality classes. The model results are obtained using the median parameter values extracted from Bayesian analyses with (solid lines) and without (dashed lines) the inclusion of spin polarization observable. The experimental data for the pTp_T-spectra is taken from Ref. [46]. The data for v2{2}v_2\{2\} and v2{4}v_2\{4\} from Ref. [47] are used to construct mean v2v_2, as discussed in § 1.4, and is shown in the right panel.

Figure 15. (left) Transverse momentum and (right) azimuthal angle dependence of longitudinal polarization for Pb-Pb collisions at sNN=5.02\sqrt{s_{NN}} = 5.02 TeV in the 30-50% centrality. Shown are model results obtained using median bulk viscosity values extracted from Bayesian analyses with and without inclusion of spin polarization observable.

Finally, we compare the extracted transport coefficients with results from other analyses in Figure 16. The shear viscosity shown in the left panel is broadly consistent with existing results in the literature. In contrast, significantly larger variations are observed among the reported results for the bulk viscosity. The bulk viscosity obtained in our analysis without spin observable is in close agreement with the JETSCAPE result. However, the bulk viscosity extracted from the analysis including spin polarization observable is comparatively larger than existing results shown in the figure. Such a larger bulk viscosity appears to be necessary in order to reproduce the experimentally observed sign of the longitudinal polarization.

Figure 16. Comparison of the extracted transport coefficients obtained from the present Bayesian analyses with and without spin observables (solid and dashed lines, respectively) with results from J. Bernhard et al. [8] (dash-dotted line), the TRAJECTUM framework [11] (dotted line), and the JETSCAPE collaboration [9] (dash-double-dotted line). The present results, the Bernhard et al. analysis, and the JETSCAPE results employ median posterior parameter values, while the TRAJECTUM result corresponds to mean parameter values.

Summary

In this work, we have performed a Bayesian analysis of Pb+Pb collisions at sNN=5.02\sqrt{s_{NN}} = 5.02 TeV using a Gaussian-process emulator trained on a finite ensemble of model evaluations. The predictive accuracy of the emulator was assessed by partitioning the design ensemble into training and validation subsets. The Gaussian-process emulator was trained on the training set and evaluated on the validation set, demonstrating nice agreement between predicted and true principal-component values. Posterior inference was carried out both with and without the inclusion of longitudinal spin polarization of Λ\Lambda hyperons in order to quantify its impact on the extraction of QGP transport properties.

We find that the extracted shear viscosity η/s(T)\eta/s(T) is largely unchanged when spin polarization data are included, indicating that conventional bulk hadronic observables already provide strong constraints on shear transport. In contrast, the inferred bulk viscosity ζ/s(T)\zeta/s(T) exhibits an upward shift when PzP_z is incorporated. In particular, the posterior median increases by approximately a factor of two, while the MAP estimate shows a modest increase. Although the credible intervals of the two analyses retain significant overlap, this shift indicates that longitudinal spin polarization provides additional sensitivity to bulk viscous effects.

Overall, our results demonstrate that spin polarization measurements provide complementary information to conventional bulk observables in Bayesian extractions of QGP transport coefficients, particularly for bulk viscosity. These findings motivate more comprehensive future simulations and global analyses in which polarization observables are systematically incorporated alongside traditional hadronic measurements to further refine constraints on the dissipative properties of the quark–gluon plasma.

Acknowledgements

This work and S.K.S. were supported by ICSC - Centro Nazionale di Ricerca in High Performance Computing, Big Data and Quantum Computing, funded by European Union - NextGenerationEU and by the project PRIN2022 Advanced Probes of the Quark Gluon Plasma funded by ”Ministero dell’Università e della Ricerca”. We further acknowledge the ICSC for awarding this project access to the EuroHPC supercomputer LEONARDO, hosted by CINECA (Italy). S.K.S also thank Jhilam Sadhukhan for helpful discussions and assistance with debugging the analysis script.

References

References

  1. [4]P. K. Kovtun, D. T. Son, and A. O. Starinets, Viscosity in strongly interacting quantum field theories from black hole physics, Phys. Rev. Lett. 94, 111601 (2005).pubmed.ncbi.nlm.nih.gov/15903845
  2. [5]N. Astrakhantsev, V. Braguta, and A. Kotov, Temperature dependence of shear viscosity of SU(3)–gluodynamics within lattice simulation, JHEP 04, 101, arXiv:1701.02266 [hep-lat].DOI
  3. [6]L. Altenkort, A. M. Eller, A. Francis, O. Kaczmarek, L. Mazur, G. D. Moore, and H.-T. Shu, Viscosity of pure-glue qcd from the lattice, Phys. Rev. D 108, 014503 (2023).DOI
  4. [7]J. E. Bernhard, J. S. Moreland, S. A. Bass, J. Liu, and U. Heinz, Applying bayesian parameter estimation to relativistic heavy-ion collisions: Simultaneous characterization of the initial state and quark–gluon plasma medium, Phys. Rev. C 94, 024907 (2016).DOI
  5. [8]J. E. Bernhard, J. S. Moreland, and S. A. Bass, Bayesian estimation of the specific shear and bulk viscosity of quark–gluon plasma, Nature Phys. 15, 1113 (2019).DOI
  6. [9]D. Everett et al. (JETSCAPE Collaboration), Multisystem bayesian constraints on the transport coefficients of qcd matter, Phys. Rev. C 103, 054904 (2021).DOI
  7. [10]J. E. Parkkila, A. Onnerstad, and D. J. Kim, Bayesian estimation of the specific shear and bulk viscosity of the quark-gluon plasma with additional flow harmonic observables, Phys. Rev. C 104, 054904 (2021).DOI
  8. [11]G. Nijs, W. van der Schee, U. Gürsoy, and R. Snellings, Bayesian analysis of heavy ion collisions with the heavy ion computational framework trajectum, Phys. Rev. C 103, 054909 (2021).DOI
  9. [12]L. Vermunt, Y. Seemann, A. Dubla, S. Floerchinger, E. Grossi, A. Kirchner, S. Masciocchi, and I. Selyuzhenkov, Mapping properties of the quark gluon plasma in Pb-Pb and Xe-Xe collisions at energies available at the CERN Large Hadron Collider, Phys. Rev. C 108, 064908 (2023), arXiv:2308.16722 [hep-ph].
  10. [13]S. A. Jahan, H. Roch, and C. Shen, Bayesian analysis of (3 + 1)D relativistic nuclear dynamics with the rhic beam energy scan data, Phys. Rev. C 110, 054905 (2024).arxiv.org/abs/2408.00537
  11. [14]N. Götz, I. Karpenko, and H. Elfner, Bayesian analysis of a (3 + 1)D hybrid approach with initial conditions from hadronic transport, Phys. Rev. C 112, 014910 (2025).arxiv.org/abs/2503.10181
  12. [15]L. Adamczyk et al. (STAR), Global Λ hyperon polarization in nuclear collisions: evidence for the most vortical fluid, Nature 548, 62 (2017), arXiv:1701.06657 [nucl-ex].
  13. [16]F. Becattini and M. A. Lisa, Polarization and Vorticity in the Quark–Gluon Plasma, Ann. Rev. Nucl. Part. Sci. 70, 395 (2020), arXiv:2003.03640 [nucl-ex].DOI
  14. [17]F. Becattini, Spin and polarization: a new direction in relativistic heavy ion physics, Rept. Prog. Phys. 85, 122301 (2022), arXiv:2204.01144 [nucl-th].DOI
  15. [18]W.-B. Dong, X.-L. Sheng, Y.-L. Yin, and Q. Wang, Global polarization and spin alignment in heavy-ion collisions: past, present and future, PoS SPIN2023, 229 (2024), arXiv:2401.15576 [nucl-th].arxiv.org/abs/2401.15576
  16. [19]F. Becattini, M. Buzzegoli, T. Niida, S. Pu, A.-H. Tang, and Q. Wang, Spin polarization in relativistic heavy-ion collisions, Int. J. Mod. Phys. E 33, 2430006 (2024), arXiv:2402.04540 [nucl-th].arxiv.org/abs/2402.04540
  17. [20]S. K. Singh and J. Alam, Suppression of spin polarization as an indicator of QCD critical point, Eur. Phys. J. C 83, 585 (2023).DOI
  18. [21]A. Palermo, E. Grossi, I. Karpenko, and F. Becattini, A polarization in very high energy heavy ion collisions as a probe of the quark–gluon plasma formation and properties, Eur. Phys. J. C 84, 920 (2024), arXiv:2404.14295 [nucl-th].arxiv.org/abs/2404.14295
  19. [22]D.-X. Wei, Impact of spin polarization on transport and thermodynamic coefficients, Phys. Rev. C 112, 064921 (2025).DOI
  20. [23]G. S. Denicol, H. Niemi, E. Molnar, and D. H. Rischke, Derivation of transient relativistic fluid dynamics from the Boltzmann equation, Phys. Rev. D 85, 114047 (2012), [Erratum: Phys.Rev.D 91, 039902 (2015)], arXiv:1202.4551 [nucl-th].DOI
  21. [24]G. S. Denicol, S. Jeon, and C. Gale, Transport coefficients of bulk viscous pressure in the 14-moment approximation, Phys. Rev. C 90, 024912 (2014).DOI
  22. [25]E. Molnár, H. Niemi, G. S. Denicol, and D. H. Rischke, Relative importance of second-order terms in relativistic dissipative fluid dynamics, Phys. Rev. D 89, 074010 (2014).DOI
  23. [26]A. Monnai, B. Schenke, and C. Shen, Equation of state at finite densities for qcd matter in nuclear collisions, Phys. Rev. C 100, 024907 (2019).DOI
  24. [27]A. Bazazov et al. (HotQCD), Equation of state in ( 2+1 )-flavor QCD, Phys. Rev. D 90, 094503 (2014), arXiv:1407.6387 [hep-lat].
  25. [28]A. Bazazov et al. (HotQCD), Fluctuations and Correlations of net baryon number, electric charge, and strangeness: A comparison of lattice QCD results with the hadron resonance gas model, Phys. Rev. D 86, 034509 (2012), arXiv:1203.0784 [hep-lat].
  26. [29]H. T. Ding, S. Mukherjee, H. Ohno, P. Petreczky, and H. P. Schadler, Diagonal and off-diagonal quark number susceptibilities at high temperatures, Phys. Rev. D 92, 074043 (2015), arXiv:1507.06637 [hep-lat].
  27. [30]A. Bazavov et al., The QCD Equation of State to O(μ_B^6) from Lattice QCD, Phys. Rev. D 95, 054504 (2017), arXiv:1701.04325 [hep-lat].DOI
  28. [31]https://sites.google.com/view/qcdneos/.
  29. [32]C. Shen and S. Alzhrani, Collision-geometry-based 3D initial condition for relativistic heavy-ion collisions, Phys. Rev. C 102, 014909 (2020), arXiv:2003.05852 [nucl-th].DOI
  30. [33]S. Ryu, V. Jupic, and C. Shen, Probing early-time longitudinal dynamics with the Λ hyperon’s spin polarization in relativistic heavy-ion collisions, Phys. Rev. C 104, 054908 (2021).DOI
  31. [34]G. S. Denicol, C. Gale, S. Jeon, A. Monnai, B. Schenke, and C. Shen, Net baryon diffusion in fluid dynamic simulations of relativistic heavy-ion collisions, Phys. Rev. C 98, 034916 (2018), arXiv:1804.10557 [nucl-th].DOI
  32. [35]P. Huovinen and H. Petersen, Particlization in hybrid models, The European Physical Journal A 48, 171 (2012).DOI
  33. [36]I. A. Karpenko, P. Huovinen, H. Petersen, and M. Bleicher, Estimation of the shear viscosity at finite net-baryon density from A + A collision data at √sNN = 7.7 − 200 GeV, Phys. Rev. C 91, 064901 (2015), arXiv:1502.01978 [nucl-th].DOI
  34. [37]A. Schäfer, I. Karpenko, X.-Y. Wu, J. Hammelmann, and H. Elfner, Particle production in a hybrid approach for a beam energy scan of au+au/pb+pb collisions between √sNN = 4.3 gev and √sNN = 200.0 gev, The European Physical Journal A 58, 230 (2022).
  35. [38]https://github.com/smash-transport/smash-hadron-sampler.
  36. [39]J. Weil et al., Particle production and equilibrium properties within a new hadron transport approach for heavy-ion collisions, Phys. Rev. C 94, 054905 (2016).DOI
  37. [40]A. Wergieluk et al., smash-transport/smash: Smash-3.1 (2024).
  38. [41]F. Becattini, G. Inghirami, V. Rolando, A. Beraudo, L. Del Zanna, A. De Pace, M. Nardi, G. Pagliara, and V. Chandra, A study of vorticity formation in high energy nuclear collisions, Eur. Phys. J. C 75, 406 (2015), [Erratum: Eur.Phys.J.C 78, 354 (2018)], arXiv:1501.04468 [nucl-th].DOI
  39. [42]F. Becattini, M. Buzzegoli, and A. Palermo, Spin-thermal shear coupling in a relativistic fluid, Phys. Lett. B 820, 136519 (2021), arXiv:2103.10917 [nucl-th].DOI
  40. [43]S. Y. F. Liu and Y. Yin, Spin polarization induced by the hydrodynamic gradients, JHEP 07, 188, arXiv:2103.09200 [hep-ph].DOI
  41. [44]X.-L. Sheng, F. Becattini, and D. Roselli, An improved formula for Wigner function and spin polarization in a decoupling relativistic fluid at local thermodynamic equilibrium (2025), arXiv:2509.14301 [nucl-th].DOI
  42. [45]J. Adam et al. (ALICE Collaboration), Centrality dependence of the charged-particle multiplicity density at midrapidity in pb-pb collisions at √sNN = 5.02 TeV, Phys. Rev. Lett. 116, 222302 (2016).DOI
  43. [46]S. Acharya et al. (ALICE Collaboration), Production of charged pions, kaons, and (anti-)protons in pb-pb and inelastic pp collisions at √sNN = 5.02 tev, Phys. Rev. C 101, 044907 (2020).DOI
  44. [47]J. Adam et al. (The ALICE Collaboration), Anisotropic flow of charged particles in pb-pb collisions at √sNN = 5.02 TeV, Phys. Rev. Lett. 116, 132302 (2016).DOI
  45. [48]S. Acharya et al. (ALICE Collaboration), Polarization of Λ and Λ̄ hyperons along the beam direction in pb-pb collisions at √sNN = 5.02 TeV, Phys. Rev. Lett. 128, 172005 (2022).
  46. [49]J.-Y. Ollitrault, A. M. Poskanzer, and S. A. Voloshin, Effect of flow fluctuations and nonflow on elliptic flow methods, Phys. Rev. C 80, 014904 (2009).
  47. [50]J. S. Moreland, J. E. Bernhard, and S. A. Bass, Alternative ansatz to wounded nucleon and binary collision scaling in high-energy nuclear collisions, Phys. Rev. C 92, 011901(R) (2015).DOI
  48. [51]https://github.com/Duke-QCD/trento.
  49. [52]S. K. Singh, R. Ryblewski, and W. Florkowski, Spin dynamics with realistic hydrodynamic background for relativistic heavy-ion collisions, Phys. Rev. C 111, 024907 (2025), arXiv:2411.08223 [hep-ph].DOI
  50. [53]S. K. Singh and J.-e. Alam, Effects of the qcd critical point on the spectra and flow coefficients of hadrons, Phys. Rev. D 107, 074042 (2023).DOI
  51. [54]D. H. Rischke, S. Bernard, and J. A. Maruhn, Relativistic hydrodynamics for heavy-ion collisions. i. general aspects and expansion into vacuum, Nuclear Physics A 595, 346 (1995).DOI
  52. [55]I. Karpenko, P. Huovinen, and M. Bleicher, A 3+1 dimensional viscous hydrodynamic code for relativistic heavy ion collisions, Comput. Phys. Commun. 185, 3016 (2014), arXiv:1312.4160 [nucl-th].DOI
  53. [56]https://github.com/yukarpenko/vhlle/tree/stable_ebe.
  54. [57]https://www.openmp.org/.
  55. [58]Sapna, S. K. Singh, and D. Wagner, Spin polarization of Λ hyperons from dissipative spin hydrodynamics, Phys. Rev. C 112, 054902 (2025).DOI
  56. [59]M. Stein, Large sample properties of simulations using latin hypercube sampling, Technometrics 29, 143 (1987), https://www.tandfonline.com/doi/pdf/10.1080/00401706.1987.10488205.DOI
  57. [60]R. Carnell, lhs, https://github.com/bertcarnell/lhs.
  58. [61]F. Pedregosa, G. Varoquaux, A. Gramfort, V. Michel, B. Thirion, O. Grisel, M. Blondel, P. Prettenhofer, R. Weiss, V. Dubourg, J. Vanderplas, A. Passos, D. Cournapeau, M. Brucher, M. Perrot, and Édouard Duchesnay, Scikit-learn: Machine learning in python, Journal of Machine Learning Research 12, 2825 (2011).arxiv.org/abs/1201.0490
  59. [62]GPy, GPy: A gaussian process framework in python, http://github.com/SheffieldML/GPy (2014).
  60. [63]J. E. Bernhard, Bayesian parameter estimation for relativistic heavy-ion collisions, Ph.D. thesis, Duke U. (2018), arXiv:1804.06469 [nucl-th].arxiv.org/abs/1804.06469
  61. [64]T. Hastie, R. Tibshirani, and J. Friedman, The Elements of Statistical Learning: Data Mining, Inference, and Prediction, 2nd ed. (Springer, New York, 2009).
  62. [65]D. Foreman-Mackey, D. W. Hogg, D. Lang, and J. Goodman, emcee: The mcmc hammer, Publications of the Astronomical Society of the Pacific 125, 306 (2013).
  63. [66]W. D. Vousden, W. M. Farr, and I. Mandel, Dynamic temperature selection for parallel tempering in markov chain monte carlo simulations, Monthly Notices of the Royal Astronomical Society 455, 1919 (2015), https://academic.oup.com/mnras/article-pdf/455/2/1919/18514064/stv2422.pdf.DOI

Paper details

vlnc:W_5hdcn9jv
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents