betaFeedback

WorksPhysics and Astronomy

Consistent machine learning for topology optimization with microstructure-dependent neural network material models

Abstract

Additive manufacturing methods together with topology optimization have enabled the creation of multiscale structures with controlled spatially-varying material microstructure. However, topology optimization or inverse design of such structures in the presence of nonlinearities remains a challenge due to the expense of computational homogenization methods and the complexity of differentiably parameterizing the microstructural response. A solution to this challenge lies in machine learning techniques that offer efficient, differentiable mappings between the material response and its microstructural descriptors. This work presents a framework for designing multiscale heterogeneous structures with spatially varying microstructures by merging a homogenization-based topology optimization strategy with a consistent machine learning approach grounded in hyperelasticity theory. We leverage neural architectures that adhere to critical physical principles such as polyconvexity, objectivity, material symmetry, and thermodynamic consistency to supply the framework with a reliable constitutive model that is dependent on material microstructural descriptors. Our findings highlight the potential of integrating consistent machine learning models with density-based topology optimization for enhancing design optimization of heterogeneous hyperelastic structures under finite deformations.

Introduction

The growth of computational resources, together with advances in additive manufacturing (AM), have brought topology optimization (TO) to the forefront of engineering design. The foundational work by Bendsøe and Kikuchi [8], which addressed the optimization of material distribution through a homogenized treatment of the microstructure, provided the basis for the approaches we have today. Despite this, subsequently developed methods such as the solid isotropic material with penalization (SIMP) method [7, 57] and the level set method [1] were favored over homogenization-based TO because of early challenges related to manufacturability, small length scale effects, and microstructural connectivity. Today, with advances in additive manufacturing technology, it is now possible to 3D print various graded microstructures (see e.g. [44]), which has prompted a resurgence of homogenization-based methods [39, 24, 25] in multiscale TO. Structures of unprecedented complexity have been both designed and physically realized at multiple scales [42]. Furthermore, AM methods have enabled the realization of multi-material structures [22], complementing the development of novel techniques in multimaterial TO [40 b] and its extension to hyperelastic materials under large deformations [56].

Extending the existing single scale (e.g. [17, 45]) to two-scale concurrent design optimization methods for use with nonlinear physics is a particularly challenging task as the relevant physics can no longer be approximated via linear, first-order homogenization theory. Moreover, analytical homogenization methods are not available for arbitrarily complex microstructures, limiting what can be readily used in a homogenization based TO framework. The alternative of employing a typical numerical homogenization approach (e.g., FE2^{2}) concurrently is generally computationally prohibitive [53]. Data-driven homogenization techniques involving machine learning (ML) methods [23, 55], specifically neural networks and Gaussian processes for nonlinear material behavior [10], provide an elegant alternative to the expensive FE2^{2} method, and offer a means to account for the dependence of microstructural descriptors in the homogenized response. Notably, neural networks with recurrent units are even capable of modeling history-dependent material responses [38]. Furthermore, a natural advantage of employing NNs to capture the homogenized constitutive behavior is the ease of obtaining derivatives for both the tangent stiffness of the material as well as the sensitivities in TO, leveraging automatic differentiation. Although NNs trained to capture microstructural descriptor-based homogenized responses were previously employed in the context of TO for elastic multiscale designs [52, 15], the application of ML driven TO techniques to geometrically and materially nonlinear responses is still in its infancy.

The fundamental limitation that has hindered the use of typical black-box neural network (NN) constitutive models is their failure to adhere to established physical principles, particularly in data-scarce situations, leading to concerns about accuracy and numerical stability. In the case of hyperelasticity, this includes thermodynamic consistency, objectivity, existence of a natural state [18], quasiconvexity, and volumetric growth conditions [6], in addition to material dependent symmetry conditions. Polyconvexity is a convenient and tractable condition to ensure quasiconvexity (and thereby ellipticity), which is needed to prove the existence of minimizers for the variational problem being solved in the forward analysis. However, in the case of hyperelastic composites, like the ones we consider here, the homogenization step can lead to a loss of ellipticity (and therefore, quasiconvexity) despite each phase individually being polyconvex [14]. This implies that even under a data-rich scenario, a black-box model trained using homogenized response data can exhibit microstructural instabilities leading to numerical difficulties in the forward analyses performed in the optimization loop. Thus, it becomes all the more important to wrap the homogenized response with a polyconvex envelope (sometimes referred to as a polyconvexification, see [5]) to ensure that the response is stable during the optimization procedure. The development of the input convex neural networks (ICNNs) [2, 16] has enabled significant progress in realizing NN-based models that attempt to incorporate polyconvexity among other relevant physical principles [4, 32]. In particular, Linden et al. [34] have provided a rigorous framework for using ICNN based models in the context of hyperelasticity formulated in terms of strain invariants.

In the present work, we address multiscale TO in geometrically and materially nonlinear settings by proposing a consistent machine learning-driven framework for hyperelastic composite structure design, as illustrated in Figure 1. The framework is composed of the consistent ML block that captures the homogenized constitutive response as a function of microstructural descriptors in an offline phase adhering to hyperelasticity principles, and a multiscale TO block that treats the microstructural descriptors as additional design variables in the nonlinear TO problem. Extending the work of Linden et al. [34] on ICNN based models, we propose a more general, principal stretch-based hyperelastic model that adheres to the necessary conditions for isotropic hyperelasticity [6] for the consistent ML block. A single microstructural descriptor, the microstructural volume fraction, is considered to describe the microstructural variations; however, the framework can be extended to include multiple microstructural descriptors, such as the orientation of the microstructural phases to capture anisotropy in the homogenized response, among others. The data-driven design and analysis framework developed by Bessa et al. [10]; Yi and Bessa (2023) is employed to streamline the data generation needed for training the consistent ML constitutive models. We first compare the performance of consistent ML models against classical single-scale phenomenological models through a series of TO examples for maximizing external work, providing confidence in the approach prior to demonstrating the two-scale optimization results. Subsequently, we demonstrate the two-scale concurrent design optimization examples that result in heterogeneous structures with spatially varying microstructural volume fractions and contrast it with homogeneous structures with fixed microstructural volume fractions.

Overview of the consistent machine learning-driven topology optimization framework for multiscale hyperelastic structures

Figure 1. An overview of the proposed consistent machine learning-driven topology optimization framework for multiscale hyperelastic structures. The consistent ML block learns the mapping between microstructural descriptors dmd_m (set as the inclusion volume fraction α\alpha) and the homogenized constitutive response in an offline phase adhering to the hyperelastic principles. The multiscale TO block treats α\alpha as an additional design variable using its filtered counterpart to approximate the spatially varying material response. By employing a differentiable ML material model in the forward analyses, the optimizer can efficiently update the design variables using analytically computed sensitivities of the objective/constraint functions obtained through automatic differentiation. The magnified regions in the multiscale TO block illustrate the filtered and projected pseudo-density field ρˉ\bar{\rho} and the filtered microstructural inclusion volume fraction field α^\hat{\alpha} in the initial design state (left) and the final optimized state (right).

Constitutive Modeling for Hyperelasticity Materials

The constitutive model employed in the multiscale TO framework presented here relies on a first order computational homogenization through finite element method (FEM) to compute the effective macroscopic response dataset corresponding to the microscopic representative volume element (RVE). As usual, we assume a separation of scales, with the characteristic dimension of the RVE much smaller than that of the macroscopic problem while also being larger than the characteristic dimension of the microstructural features of each material phase. Throughout this manuscript we refer to the kinematic and kinetic quantities at the macroscopic scale to avoid confusion between the single and multiple scale settings. We consider a total Lagrangian formulation and choose the Green-Lagrange strain tensor EE as the primary kinematic variable, computed using the deformation gradient FF and the right Cauchy-Green deformation tensor CC via

C:=FTF;E:=12(C−1),(1)C := F^{T}F \quad; \quad E := \frac{1}{2}(C-1), \tag*{(1)}

and the second Piola-Kirchhoff stress SS as the corresponding energetically conjugate variable. To avoid interpenetration of matter, the condition J:=det⁡F≠0J := \det F \neq0 must hold. In the multiscale setting, these quantities correspond to their homogenized counterparts in accordance with the Hill–Mandel lemma. From the solution to the (periodic) boundary value problem at the microscale subject to the macroscopic deformation gradient FF, the macroscopic Piola-Kirchhoff stress is obtained through a volume average of its microscopic counterpart, i.e. P≡⟨Pμ⟩P \equiv\langle P_{\mu}\rangle. The second Piola-Kirchhoff stress is then obtained from the relation S:=F−1PS := F^{-1}P. With the definition of consistent macroscopic quantities, the conditions set for the constitutive relation between the second Piola-Kirchhoff stress SS and the Green-Lagrange strain EE are identical for the single and multiple scale settings, and hence the following discussion is valid for both.

Hyperelasticity conditions

The constitutive definition of hyperelastic materials is provided through a strain energy density function ψ\psi, whose derivative with respect to a strain measure directly relates to the definition of the thermodynamically consistent conjugate stress measure ([18]). If we define ψ=ψ^(E)\psi= \hat{\psi}(E), then the energetically conjugate stress measure – the second Piola-Kirchhoff stress, is obtained as S=∂Eψ^S = \partial_{E}\hat{\psi}.

The reference configuration of the body must correspond to a natural state ([18]), i.e. a zero-valued minimum stored energy density state that is stress free:

ψ^(E)≥0s.t.ψ^(E)∣E=0=0andS(E)∣E=0=0(2)\hat{\psi}(E) \geq0 \quad\text{s.t.} \quad\hat{\psi}(E)|_{E=0} = 0 \quad\text{and} \quad S(E)|_{E=0} = 0 \tag*{(2)}

Following the principle of objectivity ([18]), the material behavior should be independent of the observer, implying that the strain energy density remains invariant to orthogonal transformations QQ to the displacement gradient FF. Since the right Cauchy-Green deformation CC is objective by definition, i.e. C=FTF=FTQTQF=(QF)T(QF)C = F^{T}F = F^{T}Q^{T}QF = (QF)^{T}(QF), the Green-Lagrange strain EE is also objective, c.f. (1). Thus formulating the strain energy density as ψ^(E)\hat{\psi}(E) ensures objectivity:

ψ~(QF)=ψ^(E)=ψ~(F)(3)\tilde{\psi}(QF) = \hat{\psi}(E) = \tilde{\psi}(F) \tag*{(3)}

Furthermore, the material body cannot be compressed to a volume of zero, or expanded to infinite volume. Thus, the strain energy density of hyperelastic materials has to satisfy the volumetric growth condition:

ψ→∞as(J→0+ ∨ J→∞)(4)\psi\to\infty\quad\text{as} \quad(J \to0^{+} \ \lor\ J \to\infty) \tag*{(4)}

In order to satisfy the requirements for the existence of total potential energy minimizers associated with the boundary value problem, the strain energy density ψ\psi should also be quasiconvex.2 For a twice differentiable function, quasiconvexity implies the satisfaction of the Legendre-Hadamard condition or ellipticity and thereby rank-1 convexity.

However, imposing quasiconvexity on a strain energy density ψ\psi directly is challenging, as the non-pointwise nature of the condition makes it intractable to verify whether a given function is quasiconvex. Furthermore, the stringent growth conditions assumed for quasiconvexity ([36]) preclude any singular behavior, such as the strain energy density ψ→∞\psi\to\infty as J→0+J \to0^{+}.

Polyconvexity ([6]) is a more tractable condition that arises from generalizing the notions of duality for convex functions to the vectorial context, bridging the above limitations. A strain energy density ψ~(F)\tilde{\psi}(F) is said to be polyconvex if:

ψ~(F)=G(F,cof⁡F,det⁡F)whereG(⋅) is a convex function(5)\tilde{\psi}(F) = \mathcal{G}(F, \operatorname{cof} F, \det F) \quad\text{where} \quad\mathcal{G}(\cdot) \text{ is a convex function} \tag*{(5)}

By restricting the strain energy density to be polyconvex, one may arrive at far more physically useful functions within the context of hyperelasticity i.e. not only does polyconvexity imply quasiconvexity, but it also establishes existence of minimizers that are valid under weaker growth conditions necessary to accommodate singular behavior such as ψ→∞\psi\to\infty as J→0+J \to0^{+}.

For isotropic hyperelasticity, Theorem 5.2 from Ball [6] provides the sufficient conditions for polyconvexity of the strain energy density function. Let λ1,λ2,λ3\lambda_1,\lambda_2,\lambda_3 be the principal stretches associated with the deformation gradient F\mathbf{F} and G~(⋅)\widetilde{G}(\cdot) a convex function in its arguments. Then a strain energy density function ψ\psi of the form:

ψ~(F)=G~(λ1,λ2,λ3,λ1λ2,λ2λ3,λ3λ1,J)J=λ1λ2λ3=det⁡F(6)\widetilde{\psi}(\mathbf{F}) = \widetilde{G}(\lambda_1,\lambda_2,\lambda_3,\lambda_1\lambda_2,\lambda_2\lambda_3,\lambda_3\lambda_1,J) \quad J = \lambda_1\lambda_2\lambda_3 = \det\mathbf{F} \tag*{(6)}

is isotropic and polyconvex as per (5) if G~\widetilde{G} is symmetric and non-decreasing in the principal stretches (λ1,λ2,λ3)(\lambda_1,\lambda_2,\lambda_3) as well as their pair-wise products (λ1λ2,λ2λ3,λ3λ1)(\lambda_1\lambda_2,\lambda_2\lambda_3,\lambda_3\lambda_1).

Note that such a strain energy density function ψ\psi has to additionally satisfy the natural state conditions (2) and the volumetric growth conditions (4) to be a valid and useful hyperelastic model respectively. We remark that many of the existing isotropic hyperelastic models such as Neo-Hookean, Mooney-Rivlin, Arruda-Boyce, Blatz-Ko etc. (see Holzapfel [26]) satisfy these conditions through constructing the strain energy density in terms of the invariants of some objective strain measure such as the right Cauchy-Green deformation tensor C\mathbf{C} or the left Cauchy-Green deformation tensor B\mathbf{B}. However the sufficient conditions still correspond to (6).

Consistent machine learning for material modeling

Feed-forward neural networks (FFN) have universal approximation properties ([27, 19]) and can represent any continuous function to arbitrary accuracy provided enough data. As opposed to the classical approach of formulating a strain energy density function ψ\psi based on physical intuition and then fitting the parameters to experimental data, neural networks, with their superior representation capabilities, can directly learn arbitrarily complex material models from experimental or numerically generated data for nonlinear elastic and plastic properties ([10]). However, as discussed in § 2.1, the constitutive model for hyperelasticity should correspond to a thermodynamically consistent strain energy density function ψ\psi that satisfies conditions (2), (3), (4) and (5) along with the necessary material symmetry conditions (e.g. isotropy). Standard FFNs do not have inductive biases that guarantee that the strain energy density function they learn satisfies the conditions set forth for hyperelasticity. Thus, a feasible alternative consists of employing the so-called input convex neural networks (ICNNs) ([2]) and constructing a polyconvex strain energy density function that satisfies the conditions for hyperelasticity ([32, 4, 34, 29, 28]).

In our work, we employ the alternative ICNN formulation from Chen et al. [16] to define the strain energy density function ψ\psi for hyperelastic materials (see Appendix § 7). This architecture enforces the sufficient condition for polyconvexity for isotropic materials (6) in terms of the principal stretches λ1,λ2,λ3\lambda_1,\lambda_2,\lambda_3. As presented in Appendix B, such a polyconvex isotropic ICNN takes in input Λ={λ1,λ2,λ3,λ1λ2,λ2λ3,λ3λ1,J,−J,−ln⁡J}\boldsymbol{\Lambda} = \{\lambda_1,\lambda_2,\lambda_3,\lambda_1\lambda_2,\lambda_2\lambda_3,\lambda_3\lambda_1,J,-J,-\ln J\} and achieves isotropy through a symmetric weight sharing strategy. The growth condition corresponding to ψ→∞\psi\to\infty as J→∞J \to\infty is handled naturally due to the convex nature of the ICNN. However, the singularity associated with J=0J = 0 requires special treatment due to limited data availability in the region J→0+J \to0^{+}. Yet we argue that the behavior of the strain energy density as J→0J \to0 has to be learned from the experimental data. For this reason, rather than adding a fixed coercive function to the strain energy density definition, as suggested in Linden et al. [34] and other conventional hyperelastic models, we add a convex non-decreasing term to the input to our isotropic ICNN. We therefore choose the term f(J)=−ln⁡Jf(J) = -\ln J that is a convex, decreasing function in JJ (J>0J > 0). By constructing the strain energy density as an ICNN with inputs Λ~={λ1,λ2,λ3,λ1λ2,λ2λ3,λ3λ1,J,−J,−ln⁡J}\widetilde{\boldsymbol{\Lambda}} = \{\lambda_1,\lambda_2,\lambda_3,\lambda_1\lambda_2,\lambda_2\lambda_3,\lambda_3\lambda_1,J,-J,-\ln J\}, the singularity point becomes embedded in the model and the volumetric growth condition (4) becomes satisfied and learnable from the experimental data.

Next we address the natural state condition (2). This is achieved by adding a correction function N0\mathcal{N}_0 to the ICNN output that ensures that the strain energy density function ψ\psi and the second Piola-Kirchhoff stress S\mathbf{S} vanishes at the natural state E=0\mathbf{E} = 0. The overall strain energy density function ψ\psi can be formulated as:

ψ^(E)=G~(Λ~(E))=N(Λ~(E))+N0stress(E)+N0energy⏟N0(E)whereN0energy=−N(Λ~(E))∣E=0(7)\widehat{\psi}(\mathbf{E}) = \widetilde{\mathcal{G}}(\widetilde{\boldsymbol{\Lambda}}(\mathbf{E})) = \mathcal{N}(\widetilde{\boldsymbol{\Lambda}}(\mathbf{E})) + \underbrace{\mathcal{N}_0^{\mathrm{stress}}(\mathbf{E}) + \mathcal{N}_0^{\mathrm{energy}}}_{\mathcal{N}_0(\mathbf{E})} \qquad\text{where} \qquad \mathcal{N}_0^{\mathrm{energy}} = -\mathcal{N}(\widetilde{\boldsymbol{\Lambda}}(\mathbf{E}))\big|_{\mathbf{E}=0} \tag*{(7)}

A stress correction term N0stress(E)\mathcal{N}_{0}^{\mathrm{stress}}(E) formulated in the form:

N0stress(E)=−∂EN(Λ~(E))∣E=0:E(8)\mathcal{N}_{0}^{\mathrm{stress}}(E)=-\left.\partial_{E}\mathcal{N}\left(\tilde{\Lambda}(E)\right)\right|_{E=0}:E \tag*{(8)}

satisfies the natural state condition similarly to the correction terms proposed in As’ad et al. [4], but violates polyconvexity in addition to the material symmetry condition as remarked in Linden et al. [34]. To address this, we propose a stress correction term following the projection approach inspired by the weighted sum of derivatives method proposed in Linden et al. [34] to obtain a polyconvex stress correction term:

N0stress(Λ~(E))=N0stress(J)=−c0(J−1)withc0=−∑i=19ξi∂Λ~iN(Λ~(E))∣E=0(9)\mathcal{N}_{0}^{\mathrm{stress}}\left(\tilde{\Lambda}(E)\right)=\mathcal{N}_{0}^{\mathrm{stress}}(J)=-c_{0}(J-1)\quad\text{with}\quad c_{0}=-\left.\sum_{i=1}^{9}\xi_{i}\partial_{\tilde{\Lambda}_{i}}\mathcal{N}\left(\tilde{\Lambda}(E)\right)\right|_{E=0} \tag*{(9)}

where ξ={1/3,1/3,1/3,2/3,2/3,2/3,1,−1,1}\xi=\{1/3,1/3,1/3,2/3,2/3,2/3,1,-1,1\} correspond to weights for the derivatives with respect to the inputs Λ~={λ1,λ2,λ3,λ1λ2,λ2λ3,λ3λ1,J,−J,−ln⁡J}\tilde{\Lambda}=\{\lambda_{1},\lambda_{2},\lambda_{3},\lambda_{1}\lambda_{2},\lambda_{2}\lambda_{3},\lambda_{3}\lambda_{1},J,-J,-\ln J\}. A detailed derivation of the polyconvex stress correction term is provided Appendix § 9. The second Piola-Kirchhoff stress SS is then obtained via differentiation of the strain energy density function ψ^\hat{\psi} with respect to the Green Lagrange strain measure:

S=∂Eψ^(E)=∂EN(Λ~(E))+∂EN0(Λ~(E))=∂EN(Λ~(E))−∑i=19ξi∂Λ~iN(Λ~(E))∣E=0JC−1(10)\begin{aligned} S=\partial_{E}\hat{\psi}(E)=\partial_{E}\mathcal{N}\left(\tilde{\Lambda}(E)\right)+\partial_{E}\mathcal{N}_{0}\left(\tilde{\Lambda}(E)\right) \\ &=\partial_{E}\mathcal{N}\left(\tilde{\Lambda}(E)\right)-\left.\sum_{i=1}^{9}\xi_{i}\partial_{\tilde{\Lambda}_{i}}\mathcal{N}\left(\tilde{\Lambda}(E)\right)\right|_{E=0}JC^{-1} \tag*{(10)} \end{aligned}

The overall architecture of the resulting ICNN-based consistent ML model for hyperelasticity is illustrated in Figure 2. The input to the neural network is the Green-Lagrange strain tensor EE that is transformed to the input Λ~\tilde{\Lambda} for the ICNN through a fixed transformation layer T\mathcal{T}. The ICNN then computes the strain energy density function ψ^(E)\hat{\psi}(E) that satisfies objectivity, material symmetry, polyconvexity as well as the natural state condition (2) and the thermodynamically consistent second Piola-Kirchhoff stress SS is obtained as in (10). We remark that it is possible to use the ICNN architecture to define an isotropic hyperelastic model that satisfies the conditions for hyperelasticity (c.f. Linden et al. [34]). However, such a model can have limitations due to the hard enforcement of convexity on the pre-set invariants. A detailed discussion of this point is presented in Appendix B.

Figure 2. Schematic illustration of the consistent machine learning model for isotropic hyperelasticity. The input to the neural network is EE, which passes through a fixed transformation layer T\mathcal{T} to arrive at Λ~\tilde{\Lambda} that subsequently goes through input convex neural layers as in Chen et al. [16] to arrive at polyconvex output N\mathcal{N}. This output is regularized for the natural state condition (2) and passed through a gradient layer which obtains the second Piola-Kirchhoff stress SS as in (10). Extension of the model to include microstructural descriptors dmd_{\mathrm{m}} is achieved by appending the input space of the ICNN. The treatment of the microstructural descriptor dmd_{\mathrm{m}} is such that the ICNN output (strain energy density) is convex with respect to the microstructural descriptor, which is a reasonable assumption for the volume fraction α\alpha of a stiff inclusion in a soft matrix.

Extension of the consistent ML hyperelastic model to include microstructural descriptors is achieved by extending the input space of the ICNN, so that the constitutive mapping now corresponds to S(E,dm)=∂ψ^(E,dm)∂ES(E,d_{\mathrm{m}})=\frac{\partial\widehat{\psi}(E,d_{\mathrm{m}})}{\partial E}. In the most generalized setting, the microstructural descriptor dmd_{\mathrm{m}} could be included in the ML model through the partial input convex neural network (PICNN) (Amos et al. [2]) wherein no convexity related constraints are imposed on output strain energy density function ψ\psi with respect to the microstructural descriptor. In the present study involving two phase hyperelastic composite with a soft matrix and stiff inclusion, we consider the microstructural descriptor dmd_{\mathrm{m}} to be the volume fraction α\alpha of the stiff inclusion phase, which could be considered to hold a convex relationship with the strain energy density function ψ\psi. As a result the microstructural descriptor dm=αd_{\mathrm{m}}=\alpha is introduced in the model thorough a simple extension of the input space of the ICNN as illustrated in Figure 2.

Topology Optimization Formulation

We employ a standard density-based topology optimization scheme in which each finite element, ee, is assigned a scalar pseudo density parameter, ρe∈[0,1]\rho_e \in[0,1], reflecting the presence ρe=1\rho_e=1 or absence ρe=0\rho_e=0 of the material within the element. The design problem is regularized by means of a standard linear filtering technique (Bourdin [11]) with a user-specified length scale, rρr_\rho, in order to mitigate the checkerboard effect and mesh dependency issues, resulting in the filtered design variables ρ^e\widehat{\rho}_e. This may be mathematically expressed as:

ρ^e=ϕeiρρi,ϕeiρ=heiVi∑j=1NelemhejVj (no sum),hei=max⁡(0,rρ−∥xe−xi∥)(11)\widehat{\rho}_e=\phi^\rho_{ei}\rho_i,\qquad\phi^\rho_{ei}=\frac{h_{ei}V_i}{\sum_{j=1}^{N_{\mathrm{elem}}}h_{ej}V_j}\ \text{(no sum)},\qquad h_{ei}=\max\left(0,r_\rho-\lVert x_e-x_i\rVert\right) \tag*{(11)}

where xex_e represents the centroid of element ee and ∥⋅∥\lVert\cdot\rVert denotes the Euclidean norm.

Subsequently, the filtered design is projected by means of a smooth Heaviside function (Wang et al. [50]), in order to significantly reduce intermediate densities that may develop as a result of the filtering technique.

ρ‾e=tanh⁡(βρηρ)+tanh⁡(βρ(ρ^e−ηρ))tanh⁡(βρηρ)+tanh⁡(βρ(1−ηρ))(12)\overline{\rho}_e=\frac{\tanh(\beta_\rho\eta_\rho)+\tanh\left(\beta_\rho(\widehat{\rho}_e-\eta_\rho)\right)}{\tanh(\beta_\rho\eta_\rho)+\tanh\left(\beta_\rho(1-\eta_\rho)\right)} \tag*{(12)}

The filtered and projected pseudo-density field ρ‾e\overline{\rho}_e is then used in a SIMP interpolation scheme (Zhou and Rozvany [57]; Bendsøe [7]) during the forward analysis. To ensure numerical stability in the large deformation finite element simulations, we adopt the energy interpolation scheme proposed in Wang et al. [51] which takes the form,

ψe=χe(ρ‾e)ψe,γewithχe(ρ‾e)=ϵ+(1−ϵ)ρ‾ep(13)\psi_e=\chi_e(\overline{\rho}_e)\psi_{e,\gamma_e}\qquad\text{with}\qquad\chi_e(\overline{\rho}_e)=\epsilon+(1-\epsilon)\overline{\rho}_e^p \tag*{(13)}

where pp is SIMP penalization parameter to penalize intermediate densities. The function ψe,γe\psi_{e,\gamma_e} is the interpolated strain energy density and is defined as

ψe,γe=ψ(E(Feγe))−ψL(γe∇symue)+ψL(∇symue)=ψ(E(Feγe))−(1−γe2)ψL(∇symue)(14)\begin{aligned} \psi_{e,\gamma_e}&=\psi\left(E(F_{e\gamma_e})\right)-\psi_{\mathrm{L}}(\gamma_e\nabla_{\mathrm{sym}}u_e)+\psi_{\mathrm{L}}(\nabla_{\mathrm{sym}}u_e)\\ &=\psi\left(E(F_{e\gamma_e})\right)-(1-\gamma_e^2)\psi_{\mathrm{L}}(\nabla_{\mathrm{sym}}u_e) \tag*{(14)} \end{aligned}

which consists of the solid phase strain energy density ψ(⋅)\psi(\cdot) and small deformation linear elastic stored energy density ψL(⋅)\psi_{\mathrm{L}}(\cdot). The effective deformation gradient and symmetric gradient operator used above are defined as

Feγe=∇γeφe=1+γe∇ueand∇sym(⋅)=12(∇(⋅)+∇(⋅)T)(15)F_{e\gamma_e}=\nabla_{\gamma_e}\varphi_e=1+\gamma_e\nabla u_e\qquad\text{and}\qquad\nabla_{\mathrm{sym}}(\cdot)=\frac{1}{2}\left(\nabla(\cdot)+\nabla(\cdot)^{\mathrm{T}}\right) \tag*{(15)}

where the interpolation factor γe\gamma_e takes the value 1 for solid elements and 0 for void elements. This results in a geometrically nonlinear treatment for solid elements and small strain kinematics for the void elements. A smooth Heaviside projection function is used to compute the strain energy density interpolation parameter γe\gamma_e, providing a differentiable transition between the two kinematic formulations:

γe=tanh⁡(βψηψ)+tanh⁡(βψ(χe−ηψ))tanh⁡(βψηψ)+tanh⁡(βψ(1−ηψ))(16)\gamma_e = \frac{\tanh(\beta_\psi\eta_\psi) + \tanh(\beta_\psi(\chi_e-\eta_\psi))}{\tanh(\beta_\psi\eta_\psi) + \tanh(\beta_\psi(1-\eta_\psi))} \tag*{(16)}

The set of design variables controlled by the optimizer, denoted by Θ:={Θe∣∀e=1…Nelem}\boldsymbol{\Theta} := \{\Theta_e|\forall e = 1 \ldots N_{\mathrm{elem}}\} represents the macroscopic density design variable ρe\rho_e, i.e. Θe≡{ρe}\Theta_e \equiv\{\rho_e\} in the single scale setting or additionally include the microstructural design variable, i.e. Θe≡{ρe,αe}\Theta_e \equiv\{\rho_e,\alpha_e\} at each element ee in the multiscale setting. In a similar manner to the macroscopic density field, a design length scale on the inclusion volume fraction field is prescribed via a linear filtering operation to produce a filtered inclusion volume fraction, α^e\hat{\alpha}_e, in each element to obtain a smooth variation of the field across the topology. Consistent with Equation (11), we represent this operation, α^i=ϕijααj\hat{\alpha}_i = \phi_{ij}^{\alpha}\alpha_j, via the separate filter matrix Φα\boldsymbol{\Phi}^{\alpha} constructed with user-specified radius, rαr_\alpha. To simplify notation, the set of all physical design variables, i.e the filtered (and projected) design variables, is labeled as Θˉ\bar{\boldsymbol{\Theta}}. Depending upon the problem setting, Θˉ\bar{\boldsymbol{\Theta}} may be composed of the set of all filtered and projected macroscopic density design variables ρˉ\bar{\boldsymbol{\rho}} (single scale) or additionally include the microstructural design variables, Θˉ≡{ρˉ,α^}\bar{\boldsymbol{\Theta}} \equiv\{\bar{\boldsymbol{\rho}},\hat{\boldsymbol{\alpha}}\} (multiscale).

A total Lagrangian formulation is used to compute the internal force in each element (ee) of the form:

Finte(Θˉ,ue,n)=∂∂ue,n∫Ω0eψe dV(17)\mathcal{F}_{\mathrm{int}_e}(\bar{\boldsymbol{\Theta}},\mathbf{u}_{e,n}) = \frac{\partial}{\partial\mathbf{u}_{e,n}}\int_{\Omega_{0e}}\psi_e\,\mathrm{d}V \tag*{(17)}

at pseudo-time increment, nn, with integration over the element in the reference configuration, Ω0e⊂Ω0\Omega_{0e} \subset\Omega_0. Subsequently, the element contributions are then assembled into their global counter part, Fint\mathcal{F}_{\mathrm{int}}. Global equilibrium is then achieved via the solution of the residual equations at the nthn^{\mathrm{th}} pseudo-time increment. As Θˉ\bar{\boldsymbol{\Theta}} may be represented as a function of Θ\boldsymbol{\Theta}, the global residual equations may be written as:

R(Θ,un,ζn)=Fint(Θ,un)−ζnf0=0f0⋅un=cn(18)\begin{aligned} \mathbf{R}(\boldsymbol{\Theta},\mathbf{u}_n,\zeta_n) &= \mathcal{F}_{\mathrm{int}}(\boldsymbol{\Theta},\mathbf{u}_n)-\zeta_n\mathbf{f}_0 = 0 \\ \mathbf{f}_0\cdot\mathbf{u}_n &= c_n \tag*{(18)} \end{aligned}

The modified generalized displacement control method [33] is an effort to mitigate instabilities associated with load control in large strain topology optimization problems, while also providing more flexibility over the load distribution than standard displacement control. Note that f0\mathbf{f}_0 is a constant vector containing the load distribution, whereas the load factor, ζn\zeta_n, controls the magnitude of the applied load in each pseudo-time increment. The load factor at each step is determined via the additional equation in (18), representing a user-specified weighted average of the displacements with the constant nonzero external applied force distribution vector, f0\mathbf{f}_0. This weighted average displacement is constrained to be equal to the parameter cnc_n at the nthn^{\mathrm{th}} pseudo-time step. The forward analyses begin in an undeformed state corresponding to zero nodal displacements and zero load (i.e., u0=0\mathbf{u}_0 = 0, ζ0=0\zeta_0 = 0). With un−1,ζn−1\mathbf{u}_{n-1},\zeta_{n-1} known, the nodal displacements and load factor at the subsequent pseudo-time step, nn, are obtained via the procedure provided in Algorithm 1 with evenly spaced generalized applied displacements, cnc_n, between c0=0c_0 = 0 and the user-specified value, cNc_N, at the final step, corresponding to n=Nn = N.

The optimization problem is formulated as a work maximization problem subject to constraints imposed on the material volume fractions. This is defined mathematically via the following:

max⁡Wext=∑n=1N12(ζn+ζn−1)(cn−cn−1)s.t.g(m)(Θ)≤gmax⁡(m),m=1,…,MΘmin⁡≤Θ≤Θmax⁡with:R(Θ,un,ζn)=Fint(Θ,un)−ζnf0=0∀n=1,…,Nf0⋅un=cn(19)\begin{aligned} \max\quad& W_{\mathrm{ext}} = \sum_{n=1}^{N}\frac{1}{2}(\zeta_n+\zeta_{n-1})(c_n-c_{n-1}) \\ \mathrm{s.t.}\quad& g^{(m)}(\boldsymbol{\Theta}) \le g_{\max}^{(m)},\quad m=1,\ldots,M \\ & \boldsymbol{\Theta}_{\min}\le\boldsymbol{\Theta}\le\boldsymbol{\Theta}_{\max} \\ \mathrm{with:}\quad& \mathbf{R}(\boldsymbol{\Theta},\mathbf{u}_n,\zeta_n)=\mathcal{F}_{\mathrm{int}}(\boldsymbol{\Theta},\mathbf{u}_n)-\zeta_n\mathbf{f}_0=0\quad\forall n=1,\ldots,N \\ & \mathbf{f}_0\cdot\mathbf{u}_n=c_n \tag*{(19)} \end{aligned}

where Θmin⁡\boldsymbol{\Theta}_{\min} and Θmax⁡\boldsymbol{\Theta}_{\max} represent the side constraint bounds on the design variables. For benchmark problems, there is a single constraint (i.e. M=1M=1) corresponding to the material volume fraction:

Algorithm 1 Incremental update of the nodal displacements & load factor

Input: Nodal displacements un−1\mathbf{u}_{n-1} and load factor ζn−1\zeta_{n-1} at pseudo-time tn−1t_{n-1}; Generalized applied displacement cn\mathbf{c}_n

Output: Nodal displacements un\mathbf{u}_n and load factor ζn\zeta_n at pseudo-time tnt_n

  1. Initialize Newton iteration counter k=1k = 1

  2. Initialize un(k−1)=un−1\mathbf{u}_n^{(k-1)} = \mathbf{u}_{n-1}, ζn(k−1)=ζn−1\zeta_n^{(k-1)} = \zeta_{n-1}

  3. Initialize Δun(k−1)=0\Delta\mathbf{u}_n^{(k-1)} = 0, Δζn(k−1)=0\Delta\zeta_n^{(k-1)} = 0, Δcn=cn−cn−1\Delta\mathbf{c}_n = \mathbf{c}_n - \mathbf{c}_{n-1}

  4. while ∥R(Θ,un(k−1),ζn(k−1))∥2>tol⁡NR⋅∥R(Θ,un,ζn(0))∥2\left\lVert\mathbf{R}\left(\mathbf{\Theta},\mathbf{u}_n^{(k-1)},\zeta_n^{(k-1)}\right)\right\rVert_2 > \operatorname{tol}_{\mathrm{NR}} \cdot\left\lVert\mathbf{R}\left(\mathbf{\Theta},\mathbf{u}_n,\zeta_n^{(0)}\right)\right\rVert_2

  5. Compute KT=∂R∂u(Θ,un(k−1),ζn(k−1))\mathbf{K}_{\mathrm{T}} = \frac{\partial\mathbf{R}}{\partial\mathbf{u}}\left(\mathbf{\Theta},\mathbf{u}_n^{(k-1)},\zeta_n^{(k-1)}\right)

  6. Compute δuR=−KT−1R(Θ,un(k−1),ζn(k−1))\delta\mathbf{u}_{\mathrm{R}} = -\mathbf{K}_{\mathrm{T}}^{-1}\mathbf{R}\left(\mathbf{\Theta},\mathbf{u}_n^{(k-1)},\zeta_n^{(k-1)}\right)

  7. Compute δuf0=KT−1f0\delta\mathbf{u}_{f_0} = \mathbf{K}_{\mathrm{T}}^{-1}\mathbf{f}_0

  8. Compute δζ=Δcn−f0⋅Δun(k−1)+f0⋅δuRf0⋅δuf0\delta\zeta= \frac{\Delta\mathbf{c}_n-\mathbf{f}_0\cdot\Delta\mathbf{u}_n^{(k-1)}+\mathbf{f}_0\cdot\delta\mathbf{u}_{\mathrm{R}}}{\mathbf{f}_0\cdot\delta\mathbf{u}_{f_0}}

  9. Compute δu=δuR+δζ δuf0\delta\mathbf{u} = \delta\mathbf{u}_{\mathrm{R}} + \delta\zeta\,\delta\mathbf{u}_{f_0}

  10. Update Δun(k)=Δun(k−1)+δu\Delta\mathbf{u}_n^{(k)} = \Delta\mathbf{u}_n^{(k-1)} + \delta\mathbf{u}

  11. Update un(k)=un−1+Δun(k)\mathbf{u}_n^{(k)} = \mathbf{u}_{n-1} + \Delta\mathbf{u}_n^{(k)}

  12. return un=un(k)\mathbf{u}_n = \mathbf{u}_n^{(k)}, ζn=ζn(k)\zeta_n = \zeta_n^{(k)}

g(1)(Θ)=g(Θ)=1∑e=1NelemVe∑e=1NelemρˉeVe(20)g^{(1)}(\mathbf{\Theta}) = g(\mathbf{\Theta}) = \frac{1}{\sum_{e=1}^{N_{\mathrm{elem}}} V_e}\sum_{e=1}^{N_{\mathrm{elem}}}\bar{\rho}_e V_e \tag*{(20)}

where VeV_e is the volume of element ee. The macroscopic design density variables are bounded by ρe∈[0,1]\rho_e \in[0,1] at the element level.

Subsequently, for the two-scale optimization examples, two separate constraints are included on each material phase (i.e. M=2M=2):

g(1)(Θ)=ginc(Θ)=1∑e=1NelemVe∑e=1Nelemα^eρˉeVeg^{(1)}(\mathbf{\Theta}) = g^{\mathrm{inc}}(\mathbf{\Theta}) = \frac{1}{\sum_{e=1}^{N_{\mathrm{elem}}} V_e}\sum_{e=1}^{N_{\mathrm{elem}}}\hat{\alpha}_e\bar{\rho}_e V_e
g(2)(Θ)=gmat(Θ)=1∑e=1NelemVe∑e=1Nelem(1−α^e)ρˉeVe(21)g^{(2)}(\mathbf{\Theta}) = g^{\mathrm{mat}}(\mathbf{\Theta}) = \frac{1}{\sum_{e=1}^{N_{\mathrm{elem}}} V_e}\sum_{e=1}^{N_{\mathrm{elem}}}(1-\hat{\alpha}_e)\bar{\rho}_e V_e \tag*{(21)}

where the first constraint equation corresponds to the inclusion volume fraction and the second restricts the quantity of matrix material. Here, in addition to the macroscopic density design variables side constraint ρe∈[0,1]\rho_e \in[0,1], the inclusion volume fraction design variables are bounded by αe∈[αℓ,αu]\alpha_e \in[\alpha_{\ell},\alpha_u] at the element level, where αℓ\alpha_{\ell} and αu\alpha_u are the lower and upper bounds on the inclusion volume fraction design variables.

Sensitivity analysis

Here we provide the derivation for the sensitivity of the external work objective function with respect to the design variables, Θ\mathbf{\Theta}. First, the sequence of algebraic operations reducing to our expression for the external work integrated using the trapezoidal rule are shown below.

Wext=∑n=1N12(fext(n)+fext(n−1))⋅(un−un−1)=∑n=1N12(ζnf0+ζn−1f0)⋅(un−un−1)=∑n=1N12(ζn+ζn−1)(f0⋅un−f0⋅un−1)=∑n=1N12(ζn+ζn−1)(cn−cn−1)(22)\begin{aligned} W_{\mathrm{ext}} &= \sum_{n=1}^{N}\frac{1}{2}\left(\mathbf{f}_{\mathrm{ext}}^{(n)}+\mathbf{f}_{\mathrm{ext}}^{(n-1)}\right)\cdot\left(\mathbf{u}_n-\mathbf{u}_{n-1}\right) \\ &= \sum_{n=1}^{N}\frac{1}{2}\left(\zeta_n\mathbf{f}_0+\zeta_{n-1}\mathbf{f}_0\right)\cdot\left(\mathbf{u}_n-\mathbf{u}_{n-1}\right) \\ &= \sum_{n=1}^{N}\frac{1}{2}\left(\zeta_n+\zeta_{n-1}\right)\left(\mathbf{f}_0\cdot\mathbf{u}_n-\mathbf{f}_0\cdot\mathbf{u}_{n-1}\right) \\ &= \sum_{n=1}^{N}\frac{1}{2}\left(\zeta_n+\zeta_{n-1}\right)\left(\mathbf{c}_n-\mathbf{c}_{n-1}\right) \tag*{(22)} \end{aligned}

To obtain the sensitivity of this function, we directly differentiate the residual equation at time step, nn.

ddΘR(Θ,un,ζn)=ddΘFint(Θ,un)−f0dζndΘ=0=∂Fint∂Θ+∂Fint∂undundΘ−f0dζndΘ=0=∂Fint∂Θ+KTdundΘ−f0dζndΘ=0⟹dundΘ=KT−1(f0dζndΘ−∂Fint∂Θ)(23)\begin{aligned} \frac{d}{d\boldsymbol{\Theta}}\mathbf{R}(\boldsymbol{\Theta},\mathbf{u}_n,\zeta_n) &= \frac{d}{d\boldsymbol{\Theta}}\mathcal{F}_{\mathrm{int}}(\boldsymbol{\Theta},\mathbf{u}_n)-\mathbf{f}_0\frac{d\zeta_n}{d\boldsymbol{\Theta}}=0\\ &= \frac{\partial\mathcal{F}_{\mathrm{int}}}{\partial\boldsymbol{\Theta}}+\frac{\partial\mathcal{F}_{\mathrm{int}}}{\partial\mathbf{u}_n}\frac{d\mathbf{u}_n}{d\boldsymbol{\Theta}}-\mathbf{f}_0\frac{d\zeta_n}{d\boldsymbol{\Theta}}=0\\ &= \frac{\partial\mathcal{F}_{\mathrm{int}}}{\partial\boldsymbol{\Theta}}+\mathbf{K}_{T}\frac{d\mathbf{u}_n}{d\boldsymbol{\Theta}}-\mathbf{f}_0\frac{d\zeta_n}{d\boldsymbol{\Theta}}=0\\ \Longrightarrow\quad\frac{d\mathbf{u}_n}{d\boldsymbol{\Theta}} &=\mathbf{K}_{T}^{-1}\left(\mathbf{f}_0\frac{d\zeta_n}{d\boldsymbol{\Theta}}-\frac{\partial\mathcal{F}_{\mathrm{int}}}{\partial\boldsymbol{\Theta}}\right) \tag*{(23)} \end{aligned}

Recalling the constraint, f0⋅un=cn\mathbf{f}_0\cdot\mathbf{u}_n=c_n, we also have the following useful relationship:

ddΘ(f0⋅un)=f0⋅dundΘ=0\frac{d}{d\boldsymbol{\Theta}}\left(\mathbf{f}_0\cdot\mathbf{u}_n\right)=\mathbf{f}_0\cdot\frac{d\mathbf{u}_n}{d\boldsymbol{\Theta}}=0
⟹f0⋅dundΘ=f0⋅KT−1(f0dζndΘ−∂Fint∂Θ)=0(24)\Longrightarrow\quad\mathbf{f}_0\cdot\frac{d\mathbf{u}_n}{d\boldsymbol{\Theta}}=\mathbf{f}_0\cdot\mathbf{K}_{T}^{-1}\left(\mathbf{f}_0\frac{d\zeta_n}{d\boldsymbol{\Theta}}-\frac{\partial\mathcal{F}_{\mathrm{int}}}{\partial\boldsymbol{\Theta}}\right)=0 \tag*{(24)}

Rearranging this final equation we have the sensitivity of the load factor at time step, nn,

dζndΘ=f0⋅KT−1⋅∂Fint∂Θf0⋅KT−1⋅f0=δuf0⋅∂Fint∂Θf0⋅δuf0(25)\frac{d\zeta_n}{d\boldsymbol{\Theta}}=\frac{\mathbf{f}_0\cdot\mathbf{K}_{T}^{-1}\cdot\frac{\partial\mathcal{F}_{\mathrm{int}}}{\partial\boldsymbol{\Theta}}}{\mathbf{f}_0\cdot\mathbf{K}_{T}^{-1}\cdot\mathbf{f}_0}=\frac{\delta\mathbf{u}_{f_0}\cdot\frac{\partial\mathcal{F}_{\mathrm{int}}}{\partial\boldsymbol{\Theta}}}{\mathbf{f}_0\cdot\delta\mathbf{u}_{f_0}} \tag*{(25)}

which does not require the solution of any additional system of equations (assuming that the δuf0\delta\mathbf{u}_{f_0} vectors were saved during the forward analysis). All required partial derivatives can be easily obtained using automatic differentiation. Equation (25) can then be used to obtain the final sensitivity of the external work as provided in Equation (22) since each cnc_n is a constant.

dWextdΘ=∑n=1N12(dζndΘ+dζn−1dΘ)(cn−cn−1)(26)\frac{dW_{\mathrm{ext}}}{d\boldsymbol{\Theta}}=\sum_{n=1}^{N}\frac{1}{2}\left(\frac{d\zeta_n}{d\boldsymbol{\Theta}}+\frac{d\zeta_{n-1}}{d\boldsymbol{\Theta}}\right)(c_n-c_{n-1}) \tag*{(26)}

Finally, the chain rule is required to obtain the derivative with respect to the design variables, {ρ,α}\{\rho,\alpha\}, through the projection function and the corresponding filters in the standard manner.

Numerical Experiments and Results

In the present study, we consider two-phase composite material microstructures with stiff inclusions embedded in a soft matrix. An Arruda-Boyce (AB) hyperelastic model ([3]) is used to represent the soft rubbery matrix, while the stiff inclusion phase is represented by a Neo-Hookean model (see Bergstrom, [9]). The Arruda-Boyce model is parameterized by the initial bulk modulus κ0\kappa_0, the initial shear modulus μ0\mu_0, and λm\lambda_m, which is associated with the chain locking stretch. The strain energy density function is given by:

ψAB=μ∑i=15aiβi−1(IˉC1−3i)+κ02(J2−12−ln⁡J),whereμ=μ0(1+35λm2+99175λm4+513875λm6+4203967375λm8)−1,andβ=1λm2;a1=12;a2=120;a3=111050;a4=197000;a5=519673750(27)\begin{aligned} \psi_{AB}&=\mu\sum_{i=1}^{5}a_i\beta^{i-1}\left(\bar{I}_{C1}-3^i\right)+\frac{\kappa_0}{2}\left(\frac{J^2-1}{2}-\ln J\right), \qquad\text{where}\\ \mu&=\mu_0\left(1+\frac{3}{5\lambda_m^2}+\frac{99}{175\lambda_m^4}+\frac{513}{875\lambda_m^6}+\frac{42039}{67375\lambda_m^8}\right)^{-1}, \qquad\text{and}\\ \beta&=\frac{1}{\lambda_m^2};\quad a_1=\frac{1}{2};\quad a_2=\frac{1}{20};\quad a_3=\frac{11}{1050};\quad a_4=\frac{19}{7000};\quad a_5=\frac{519}{673750} \tag*{(27)} \end{aligned}

Here, IˉC1=J−2/3IC1\bar{I}_{C1}=J^{-2/3}I_{C1} is the modified first invariant of the right Cauchy-Green deformation tensor C\mathbf{C} and JJ is the determinant of the deformation gradient tensor F\mathbf{F}. The Neo-Hookean model is parameterized by the initial shear modulus μ0\mu_0 and the initial bulk modulus κ0\kappa_0:

ψNH=μ02(IˉC1−3)+κ02(J−1)2(28)\psi_{NH} = \frac{\mu_0}{2}\left(\bar{I}_{C1}-3\right) + \frac{\kappa_0}{2}(J-1)^2 \tag*{(28)}

Note that the initial bulk modulus is related to the initial Poisson’s ratio and shear modulus μ0\mu_0 as κ0=2μ0(1+ν0)3(1−2ν0)\kappa_0 = \frac{2\mu_0(1+\nu_0)}{3(1-2\nu_0)}. The material properties considered for the matrix phase are μ0mat=3.098×10−1\mu^{\mathrm{mat}}_0 = 3.098 \times10^{-1} MPa, λmmat=5.083\lambda^{\mathrm{mat}}_m = 5.083 to closely resemble natural rubber ([49, 9]) with ν0mat=0.45\nu^{\mathrm{mat}}_0 = 0.45. The material properties for the inclusion phase chosen such that its Young’s modulus is 100 times stiffer than that of the matrix, with a Poisson’s ratio ν0inc=0.3\nu^{\mathrm{inc}}_0 = 0.3, resulting in μ0inc=3.455×101\mu^{\mathrm{inc}}_0 = 3.455 \times10^1 MPa. Prior to demonstrating the multiscale optimization results, we first report the performance of the consistent ML models against classical single scale phenomenological models. In order to make meaningful comparison, we choose the soft rubbery material for the single scale assessment, using the soft matrix material parameters presented above. For the sake of brevity, we present the results under 2D plane strain considerations in this section, while a 3D proof of concept example is presented in Appendix D.§ 3.

Design of experiments for generating dataset for model calibration

Two datasets are generated for calibrating two distinct models: the dataset Ds\mathcal{D}^{s} to train the model Ms\mathcal{M}^{s} for single scale TO evaluations, and the dataset Dm\mathcal{D}^{m} to train the microstructure-dependent model Mm\mathcal{M}^{m} for two-scale TO evaluations. The dataset Ds\mathcal{D}^{s} consists of input-output tuples of the Green-Lagrange strain E\mathbf{E} and the corresponding second Piola-Kirchhoff stress S\mathbf{S}, with the ithi^{\mathrm{th}} data sample corresponding to (E,S)i(\mathbf{E},\mathbf{S})^{i}. The dataset Dm\mathcal{D}^{m} for the model Mm\mathcal{M}^{m} for the two-scale TO has an additional microstructural descriptor dmd_m which is the volume fraction of the inclusion phase, α\alpha, in the RVE, making the ithi^{\mathrm{th}} data sample ((α,E),S)i((\alpha,\mathbf{E}),\mathbf{S})^{i}. The strain states for data generation are obtained through Sobol sampling of the principal stretch space spanned by λd∈[0.75,1.75]\lambda_d \in[0.75,1.75] and random sampling of orthonormal principal directions Nd\mathbf{N}_d for d∈(1,⋯ ,ND)d \in(1,\cdots,N_D) where NDN_D is the spatial dimensionality of the problem. The right stretch tensor is then obtained as U=∑dλdNd⊗Nd\mathbf{U} = \sum_d \lambda_d \mathbf{N}_d \otimes\mathbf{N}_d, from which the Green-Lagrange strain tensor is computed as E=12(UTU−I)\mathbf{E} = \frac{1}{2}(\mathbf{U}^{T}\mathbf{U}-\mathbf{I}). This ensures that the strain sampling is space filling in the principal stretch space and non-informative sample points are limited. Under plane strain conditions, ND=2N_D = 2 and λ3\lambda_3 is set to unity. The target second Piola-Kirchhoff stresses for the datasets Ds\mathcal{D}^{s} comprised of 212=40962^{12} = 4096 sample strain states are obtained by a direct evaluation of the second Piola-Kirchhoff stress tensor S=∂ψ/∂E\mathbf{S} = \partial\psi/\partial\mathbf{E} at the sampled Green-Lagrange strain states. In order to generate the second Piola-Kirchhoff stresses in the dataset Dm\mathcal{D}^{m} for the microstructure-dependent model, the data-driven design and analysis framework developed by Bessa et al. [10]; Yi and Bessa (2023); van der Sch el ling et al. [43] is employed to perform RVE simulations with periodic boundary conditions in the commercial FE software ABAQUS (Dassault Systèmes, [20]), including the subsequent volumetric averaging of the stress measure. The microstructural geometry is fully described by the volume fraction α\alpha of the inclusion phase (0.1≤α≤0.50.1 \leq\alpha\leq0.5), which is generated by randomly distributing circular inclusions of radius rμr_\mu in a square RVE domain of side length LRVEL_{\mathrm{RVE}}. Following the approach discussed by Bessa et al. [10], the macroscopic deformation gradient tensor F\mathbf{F} necessary for applying the RVE boundary conditions is obtained in its rotational invariant form:

F=U=C1/2=(2E+1)1/2(29)\mathbf{F} = \mathbf{U} = \mathbf{C}^{1/2} = (2\mathbf{E}+\mathbf{1})^{1/2} \tag*{(29)}

For the considered materials and inclusion radius (rμ=0.15r_\mu= 0.15 mm), a 4 mm RVE side length (LRVE=4.0L_{\mathrm{RVE}} = 4.0 mm) was found to be sufficiently large to achieve a statistically representative response for volume fraction, α\alpha. The macroscopic second Piola Kirchhoff stresses are obtained corresponding to 2102^{10} macroscopic Green-Lagrange strain states for representative realizations of the microstructure for each volume fraction α∈{0.1,0.2,0.3,0.4,0.5}\alpha\in\{0.1,0.2,0.3,0.4,0.5\}, totalling to 5×2105 \times2^{10} data samples. Upon eliminating data samples corresponding to the non-converged RVE simulations, the final dataset Dm\mathcal{D}^{m} consists of 4787 data samples.

Model training

The strategy for training of the ML models is standardized and described in this section. The dataset D\mathcal{D} associated with a model M\mathcal{M} is split into training, validation and test datasets in the ratio of 60 : 20 : 20. The mean squared error loss function between the predicted second Piola-Kirchhoff stress S\mathbf{S} and the target second Piola-Kirchhoff stress S∗\mathbf{S}^{*}, given by:

L□=1∣D□∣∑i∈D□∥S−S∗∥2,(30)\mathcal{L}_{\square} = \frac{1}{|\mathcal{D}_{\square}|}\sum_{i \in\mathcal{D}_{\square}}\lVert\mathbf{S}-\mathbf{S}^{*}\rVert^{2}, \tag*{(30)}

is used as the objective function in the training process, where □\square is a placeholder for the dataset split under consideration, and ∣D□∣|\mathcal{D}_{\square}| is the number of samples in the dataset split and ∥⋅∥\lVert\cdot\rVert denotes the Eucledian norm. The model training is performed using Adam optimizer [31] with decoupled weight decay regularization [35], together with a exponential decaying learning rate scheduler by minimizing the loss function Ltrain\mathcal{L}_{\mathrm{train}} on the training dataset Dtrain\mathcal{D}_{\mathrm{train}}. The validation loss Lval\mathcal{L}_{\mathrm{val}} on the validation dataset Dval\mathcal{D}_{\mathrm{val}} is monitored during the training process to prevent overfitting through early stopping, as well as to tune the hyperparameters of the model. The hyperparameters of the models and the training process, tuned through a simple grid search method, are summarized in Table 1. The predictive capability of the tuned model is then evaluated on the test dataset Dtest\mathcal{D}_{\mathrm{test}}. Table 2 summarizes the performance of the trained models on the training, validation and test datasets in terms of root mean squared error (RMSE), mean absolute error (MAE), and coefficient of determination (R2R^{2}) metrics.3

HyperparameterMs\mathcal{M}^{s}Mm\mathcal{M}^{m}
No. hidden layers22
No. neurons per layer816
Batch size128128
Initial learning rate1×10−31 \times10^{-3}5×10−35 \times10^{-3}
HyperparameterMs\mathcal{M}^{s}Mm\mathcal{M}^{m}
Exponential decay rate0.50.5
Decay transition epoch interval30003000
Max epochs1500015000
Early stopping patience50005000

Table 1. Model and training hyperparameters

ModelMetricDtrains\mathcal{D}^{s}_{\mathrm{train}}Dvals\mathcal{D}^{s}_{\mathrm{val}}Dtests\mathcal{D}^{s}_{\mathrm{test}}
Ms\mathcal{M}^{s}1−R21 - R^{2}3.41×10−83.41 \times10^{-8}3.66×10−83.66 \times10^{-8}3.22×10−83.22 \times10^{-8}
RMSE1.14×10−41.14 \times10^{-4}1.14×10−41.14 \times10^{-4}1.14×10−41.14 \times10^{-4}
MAE8.47×10−58.47 \times10^{-5}8.51×10−58.51 \times10^{-5}8.52×10−58.52 \times10^{-5}
ModelMetricDtrainm\mathcal{D}^{m}_{\mathrm{train}}Dvalm\mathcal{D}^{m}_{\mathrm{val}}Dtestm\mathcal{D}^{m}_{\mathrm{test}}
Mm\mathcal{M}^{m}1−R21 - R^{2}1.13×10−41.13 \times10^{-4}1.20×10−41.20 \times10^{-4}1.53×10−41.53 \times10^{-4}
RMSE1.04×10−21.04 \times10^{-2}1.11×10−21.11 \times10^{-2}1.19×10−21.19 \times10^{-2}
MAE4.23×10−34.23 \times10^{-3}4.32×10−34.32 \times10^{-3}4.41×10−34.41 \times10^{-3}

Table 2. Performance metrics of the trained models

Evaluation of model effectiveness

We begin by evaluating the effectiveness of the consistent ML model in representing classical single scale phenomenological models. As mentioned earlier, an Arruda Boyce hyperelastic model (27) corresponding to the soft

rubbery matrix phase is considered the ground truth used for evaluating the approximation capability of the consistent ML material models. Figure 3 illustrates the constitutive response of the trained model Ms\mathcal{M}^{s} compared to the ground truth phenomenological model for uniaxial loading (i.e., variation of E11E_{11}, with all other strain components set to zero).

Stress response of the single scale consistent ML model

Figure 3. Stress response of the single scale consistent ML model compared to the ground truth phenomenological model for a uniaxial strain loading case. The plot is split into two subplots to better visualize the compressive and tensile loading ranges.

The figure highlights how closely the trained model Ms\mathcal{M}^{s} approximates the ground truth phenomenological model, which is in agreement with the performance metrics provided in Table 2. Importantly, the model shows impressive predictive performance beyond the training range. In order to visualize the predictive performance of the model in a more comprehensive manner, the strain energy density is compared to the ground truth phenomenological model in Figure 4. From the plot, visualized in the principal stretch space, we see that the trained model Ms\mathcal{M}^{s} exhibits high interpolation accuracy, with acceptable extrapolation performance attributed largely to the relevant restrictions in the consistent ML model architecture. The extrapolation quality is observed to deteriorate as the principal strain state {λ1,λ2}→0\{\lambda_1,\lambda_2\} \to\mathbf{0} which corresponds to the asymptote as J→0J \to0, yet the model is able to predict the strain energy density response in the vicinity of the singularity with reasonable accuracy.

Figure 4. Strain energy density contour plot of the single scale consistent ML model and the corresponding difference plot to the ground truth phenomenological model. The region within the red box corresponds to the trained domain.

Next we assess the ability of the consistent ML model to capture the microstructure-dependent response variations encapsulated within the two-phase composite material dataset Dm\mathcal{D}^{m}. We are now specifically interested in evaluating how well the model Mm\mathcal{M}^{m} learns the mapping between the inclusion volume fraction α\alpha of the microstructure and the homogenized material response. The stress response corresponding to uniaxial loading for inclusion volume fractions α∈{0.1,0.2,0.3,0.4,0.5}\alpha\in\{0.1, 0.2, 0.3, 0.4, 0.5\} in both compression and tension is shown in Figure 5. Note that this data is not present in the training dataset. Naturally, similar to the the single scale case, the microstructure-dependent model Mm\mathcal{M}^{m} preserves the hyperelasticity conditions. More importantly, the model captures the dependence of α\alpha on the stress response very well, suggesting that the assumption of convexity with respect to α\alpha in the model architecture was appropriate.

Stress response plots for compressive and tension loading, showing Prediction and Ground truth for $S_{11}$ and $S_{22}$ at $\alpha=0.1$, $\alpha=0.2$, $\alpha=0.3$, $\alpha=0.4$, and $\alpha=0.5$

Figure 5. Stress response of the microstructure-dependent consistent ML model compared to the ground truth obtained through RVE simulations for a uniaxial strain loading scenario for (left) compressive loading, and (right) tension loading range. The top and bottom plots show the stress components S11S_{11} and S22S_{22} separately.

Single-scale topology optimization

We now verify the performance of the consistent ML model in the context of topology optimization via direct comparison against results obtained using the “classical” or phenomenological model. The intent of this exercise is to provide confidence in the trained ML model for use in topology optimization by demonstrating nearly identical designs in a setting with directly comparable conventional results. Note that the update of the design variables is performed using the method of moving asymptotes (MMA) [48].

In the main text we present the results for two examples – the T-bracket and a cantilever beam. In Appendix D.§ 1 we also provide the results for a portal frame example, and a three-dimensional fixed-fixed beam example is presented in Appendix D.§ 3. The results in these appendices are consistent with the examples discussed in the main text.

We define each design domain with reference to a base dimension, L=100L = 100 mm, and the parameters provided in Table 3 are used unless otherwise specified. A continuation scheme is employed based on the SIMP penalty exponent and the projection strength parameter. The SIMP penalty exponent is initialized to p=1p = 1 and increased in increments of Δp=1\Delta p = 1 each continuation step up to a maximum value of p=4p = 4. In subsequent continuation steps the projection strength parameter is doubled up to a maximum value computed according to da Silva et al. [46], from an initial value of βp=1\beta_p = 1. The next continuation step begins when either the percent difference in the objective function over the previous 5 iterations has fallen below a tolerance of 0.1 or a maximum number of 50 iterations is reached. A minimum of 20 optimization iterations is also enforced in each step.

HyperparameterSymbolValueHyperparameterSymbolValue
Filter radius1rρr_{\rho}4.0Energy interpolation transition thresholdηγ\eta_{\gamma}0.01
SIMP penalty parameter (initial value)pp1.0Linearized elastic energy Young’s modulusElinE_{\mathrm{lin}}0.898385
SIMP ersatz parameterϵ\epsilon1e-5Linearized elastic energy Poisson’s ratioνlin\nu_{\mathrm{lin}}0.45
Projection strength (initial value)βρ\beta_{\rho}1.0Forward problem number of time stepsNN8
Projection thresholdηρ\eta_{\rho}0.5Relative tolerance for Newton convergencetol⁡NR\operatorname{tol}_{\mathrm{NR}}10−610^{-6}
Energy interpolation transition strengthγρ\gamma_{\rho}32.0MMA move limit0.15

Table 3. Topology optimization problem hyperparameters

Single scale topology optimization: T-bracket example

The T-bracket design domain and boundary conditions are illustrated in Figure 6a, corresponding to an average downward displacement of cN=0.3Lc_N = 0.3L applied at the center of the right-most edge. The domain is discretized into

Figure 6. (a) T-bracket boundary value problem. (b) Difference plot between the design obtained using the ML model and the design obtained using the ground truth phenomenological model, where δρ=1\delta_{\rho}=1 indicates material addition, and δρ=−1\delta_{\rho}=-1 indicates material removal. (c) Deformed configuration of the design obtained using the ML model.

35,400 four-node quadrilateral elements within which the displacement field is interpolated using standard bilinear shape functions. In this example, we employ a volume fraction upper bound of gmax⁡=0.5g_{\max} = 0.5. The convergence history is provided in Figure 7, where the continuation updates on the SIMP penalty exponent pp and projection strength parameter βρ\beta_\rho are apparent through the sharp changes in the objective function values. Apart from the expected jumps in the objective function values at optimization iterations corresponding to the continuation steps, the convergence history is smooth with few oscillations. The visualized designs in Figure 7 show the progression of the topology as the optimization process proceeds using the ML material model. The final design closely resembles the design obtained using the ground truth phenomenological model as evident from the difference plot provided in Figure 6b and the very similar convergence history shown in Figure 7. A value of δρ=1\delta_\rho= 1 indicates material addition and δρ=−1\delta_\rho= -1 indicates material removal from the design obtained using the ground truth phenomenological model. The deformed configuration of the final design is shown in Figure 6c.

Convergence history plots and illustrated T-bracket designs

Figure 7. Convergence history for the T-bracket example. Illustrated designs correspond to the optimization formulation using the ML model at iterations with selected continuation steps.

Single scale topology optimization: Cantilever beam example

We now consider a cantilever beam with the design domain as shown in Figure 8(a). The cantilever beam is fixed along the left edge and a vertically downward average displacement cN=0.6Lc_N = 0.6L is applied near the center of the right edge. The domain is discretized using 4 node quadrilateral elements with a uniform mesh of edge length 0.5 mm adding up to a total of 40000 elements. This example is particularly interesting as the cantilever beam problem subject to large deformation is a challenging example for hyperelastic materials due to the presence of buckling instabilities. We remark that for this problem we considered hyperparameters, viz. material volume fraction constraint gmax⁡=0.6g_{\max} = 0.6 and the filter radius rρ=6.0r_\rho= 6.0, that lead to final designs not susceptible to large buckling instabilities. Although not the focus of this article, future work could include buckling criteria explicitly as part of the optimization formulation to systematically prevent such behavior.

Figure 8. (a) Cantilever boundary value problem. (b) Difference plot of the design obtained using the ML model to the design obtained using the ground truth phenomenological model, where δρ=1\delta_\rho= 1 indicates material addition, and δρ=−1\delta_\rho= -1 indicates material removal. (c) Deformation of the design obtained using the ML model.

Nonetheless, minor instabilities occur during the optimization process which has a visible effect on the convergence history as well as the intermediate designs highlighting the challenging nature of the cantilever beam problem, as shown in Figure 9. We observe that while the continuation updates on the SIMP penalty exponent pp produces sharp changes in the objective function values, the projection strength parameter βρ\beta_\rho updates, especially in the later stages of the optimization process, do not lead to significantly abrupt changes in the objective. This is due to the interference of minor instabilities altering the deformation state of the design, resulting in prolonged presence of grey regions in the design, which is only slowly resolved with the βρ\beta_\rho updates. See the progression of the topology as the optimization process proceeds using the ML material model in Figure 9 for reference. Interestingly, this leads the convergence histories to differ very slightly, although the final objective values remain close to one another. As a result, we see that the final design obtained using the ML model resembles the design obtained using the ground truth phenomenological model, although there are subtle differences around the boundaries of the two design as shown in the difference plot in Figure 8(b). The deformed configuration of the final design obtained using the ML model is depicted in Figure 8(c).

Convergence history for cantilever beam example

Figure 9. Convergence history for cantilever beam example. Illustrated designs correspond to the optimization formulation using the ML model at iterations with selected continuation steps.

Multi-scale topology optimization

We now demonstrate the ability of the framework to perform simultaneous design optimization at two spatial scales. The optimization problem considered here consists of maximizing the external work (19) subject to material volume fraction constraints placed on the matrix and inclusion phases separately, as given in (21). Note that in this section we no longer have the benefit of a ground truth phenomenological model with which we can compare our results. For a fair evaluation of any potential benefits of the two-scale optimization, i.e. optimizing both the pseudo density field ρ\rho and the inclusion phase volume fraction α\alpha, we compare the results with a baseline case in which the microstructure is fixed (i.e. α=α0\alpha= \alpha_0 is fixed) while also satisfying the same material volume fraction constraints. In both cases, we employ the microstructure dependent ML model Mm\mathcal{M}^{m} to represent the hyperelastic composite. The value of α0\alpha_0 for the baseline case in each example is set based on the side constraint bounds on the total volume fraction of the inclusion phase (gmax⁡incg_{\max}^{\mathrm{inc}}) and matrix phase (gmax⁡matg_{\max}^{\mathrm{mat}}), i.e. α0=gmax⁡inc/(gmax⁡inc+gmax⁡mat)\alpha_0 = g_{\max}^{\mathrm{inc}}/(g_{\max}^{\mathrm{inc}} + g_{\max}^{\mathrm{mat}}). Similarly the total material volume fraction for the baseline case is set to gmax⁡,0=gmax⁡inc+gmax⁡matg_{\max,0} = g_{\max}^{\mathrm{inc}} + g_{\max}^{\mathrm{mat}}.

Two examples are considered in this section (the T-bracket and the cantilever beam) which can be compared with the single scale topology optimization results. The geometry, finite element discretization and the boundary conditions for these examples are discussed in Section 5.4. We remark that Appendix D.§ 1 contains an additional multiscale TO example for the portal frame boundary value problem.

Multi-scale topology optimization: T-bracket example

The T bracket example is subject to total volume fraction side constraint bounds of gmax⁡mat=0.3g_{\max}^{\mathrm{mat}} = 0.3 and gmax⁡inc=0.2g_{\max}^{\mathrm{inc}} = 0.2. Therefore, the baseline case with fixed microstructure has a fixed inclusion volume fraction α0=0.4\alpha_0 = 0.4 and a total volume fraction constraint of gmax⁡,0=0.5g_{\max,0} = 0.5. The convergence history of the objective function for this example is shown in Figure 10c. Consistent with intuition, the objective value for the case in which microstructural variations are allowed is indeed lower. From the final design with varying microstructure (Figure 10a) and the difference plot with the baseline case with fixed microstructure (Figure 10b), we observe that the number of macroscopic voids remains unchanged, but their shapes change. We also notice that the material addition is occurring close to regions chosen to have lower inclusion volume fraction α\alpha by the optimizer and the material removal is made in regions dominated by higher inclusion volume fractions.

Deformed configuration, difference plot, and convergence history for the T-bracket topology optimization problem

Figure 10. (a) Deformed configuration of the final design obtained using the ML model with varying microstructure (b) Difference plot of the design obtained using the ML model with varying microstructure to the design obtained using the ML model with fixed microstructure. (c) Convergence history for the T-bracket TO problem with varying microstructure versus fixed microstructure.

Multi-scale topology optimization: Cantilever beam example

The final example considered here corresponds to the cantilever beam. Consistent with the example in 5.4.2, the volume fraction upper bounds for the matrix and inclusion phases are set to gmax⁡mat=0.4g_{\max}^{\mathrm{mat}} = 0.4 and gmax⁡inc=0.2g_{\max}^{\mathrm{inc}} = 0.2, corresponding to a total volume fraction upper bound of gmax⁡,0=0.6g_{\max,0} = 0.6 for the baseline case with fixed microstructure. The fixed microstructure inclusion volume fraction that satisfies the material volume fraction constraint is then set to α0=13\alpha_0 = \frac{1}{3}. It can be seen from the final design with varying microstructure (Figure 11a) and the difference plot with the baseline case (Figure 11b) that the former achieves an improved objective value by adjusting the internal material-void distribution in addition to the variation of the inclusion volume fraction α\alpha. Again, the material addition predominantly occurs close to regions of lower inclusion volume fraction α\alpha whereas material removal happens close to regions with higher inclusion volume fraction. Similar to the previous examples, we observe a lower objective value allowing the microstructure to vary, demonstrating the added benefit of the proposed approach.

Deformed configuration, difference plot, and convergence history for the cantilever topology optimization problem

Figure 11. (a) Deformed configuration of the final design obtained using the ML model with varying microstructure (b) Difference plot of the design obtained with varying microstructure to the design obtained with fixed microstructure. (c) Convergence history for the cantilever TO problem with varying microstructure vs. fixed microstructure

Conclusions

A framework is presented for designing multiscale heterogeneous structures with spatially varying hyperelastic microstructures. Central to this work is the ML material model, which captures the homogenized response of the microstructure as a differentiable function of microstructural descriptors while adhering to important physical principles. Our results show that ensuring polyconvexity, among other relevant restrictions, not only results in consistent ML models of high accuracy, but also produces reliable final designs in the topology optimization process. An equally important benefit from adhering to these physical principles is the guarantee of the existence of solutions in the forward problem. The differentiable mapping of the microstructural descriptors to the homogenized response enables the computation of the tangent stiffness, as well as the sensitivities of the relevant objective/constraint functions with respect to the design variables, facilitating efficient, simultaneous design optimization at two spatial scales. The presented approach provides an effective method for designing future functionally-graded structures and materials with impactful microstructural details. Our findings indicate that two-scale optimization can significantly improve performance compared to the baseline case with spatially uniform microstructure. The examples presented produce optimized designs that align with our intuition and demonstrate that expanding the design space to multiple scales allows the optimizer to achieve higher design performance.

The proposed framework is general and can be extended to include additional microstructural descriptors, such as the orientation of microstructural phases to capture anisotropy in the homogenized response. Future work will focus on this extension using partial input convex neural networks [16], while also considering manufacturability and variability in loading conditions. An extension of the consistent ML to handle path and history-dependent material for topology optimization is also envisioned wherein we also anticipate potential acceleration of the optimization process due to the absence of Newton-Raphson iterations [38].

Acknowledgements.. H.V. and M.A.B. gratefully acknowledge the financial support from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement ‘LIGHTEN – Ultralight membrane structures toward a sustainable environment’ H2020-MSCA-ITN-2020-LIGHTEN-956547.

Modification to ICNN for modeling hyperelasticity

Here, we recall three fundamental facts about convexity from Boyd and Vandenberghe [12] that are useful within the context of input convex neural networks.

  1. If fi:Rn→Rf_i:\mathbb{R}^n \to\mathbb{R} are convex functions and ci≥0c_i \ge0, then the function g:Rn→Rg:\mathbb{R}^n \to\mathbb{R} defined as:

g(y)=∑i=1mcifi(y),dom⁡g=⋂i=1mdom⁡fi(31)g(\mathbf{y}) = \sum_{i=1}^{m} c_i f_i(\mathbf{y}), \qquad\operatorname{dom} g = \bigcap_{i=1}^{m} \operatorname{dom} f_i \tag*{(31)}

is convex.

  1. The composition of a convex function with an affine mapping preserves convexity. If the function f:Rn→Rf:\mathbb{R}^n \to\mathbb{R} is a convex function, then a function g:Rm→Rg:\mathbb{R}^m \to\mathbb{R} defined as

g(y)=f(Wy+b),dom⁡g={y∣Wy+b∈dom⁡f}(32)g(\mathbf{y}) = f(\mathbf{W}\mathbf{y} + \mathbf{b}), \qquad\operatorname{dom} g = \{\mathbf{y} \mid\mathbf{W}\mathbf{y} + \mathbf{b} \in\operatorname{dom} f\} \tag*{(32)}

is also convex, with W∈Rn×m\mathbf{W} \in\mathbb{R}^{n \times m}, b∈Rn\mathbf{b} \in\mathbb{R}^n.

  1. The composition of a convex function with a convex non-decreasing function is convex. If h:Rm→Rnh:\mathbb{R}^m \to\mathbb{R}^n is a convex function and f:Rn→Rf:\mathbb{R}^n \to\mathbb{R} is a convex non-decreasing function, then the composition g:Rm→Rg:\mathbb{R}^m \to\mathbb{R} defined as:

g(y)=f(h(y)),dom⁡g={y∈dom⁡h∣h(y)∈dom⁡f}(33)g(\mathbf{y}) = f(h(\mathbf{y})), \qquad\operatorname{dom} g = \{\mathbf{y} \in\operatorname{dom} h \mid h(\mathbf{y}) \in\operatorname{dom} f\} \tag*{(33)}

is convex.

Figure A.12. Input Neural Network architecture

The ICNN proposed by Amos et al. [2] uses (A.2) together with (A.3) in the first layer to achieve convexity. In each of the subsequent layers (A.3) is used together with (A.1) for each core sub-layer, and (A.2) for each passthrough sub-layer. Its mathematical definition for general vectorial input is defined as f(y;θ)f(\mathbf{y};\boldsymbol{\theta}):

zi+1=Ai(Wi(z)zi+Wi(y)y+bi)for i=0,…,l−1f(y,θ)=zl(34)\begin{aligned} \mathbf{z}_{i+1} &= \mathcal{A}_i\left(\mathbf{W}^{(z)}_i\mathbf{z}_i + \mathbf{W}^{(y)}_i\mathbf{y} + \mathbf{b}_i\right) \quad\text{for } i = 0,\ldots,l-1 \\ f(\mathbf{y},\boldsymbol{\theta}) &= \mathbf{z}_l \tag*{(34)} \end{aligned}

where zi\mathbf{z}_i denotes the layers (with z0,W0(z)≡0\mathbf{z}_0,\mathbf{W}^{(z)}_0 \equiv0) to which convex and non-decreasing element-wise activation functions Ai(⋅)\mathcal{A}_i(\cdot) are applied. The learnable parameters are θ={W0:l−1(z),W1:l−1(y),b0:L−1}\boldsymbol{\theta} = \{\mathbf{W}^{(z)}_{0:l-1},\mathbf{W}^{(y)}_{1:l-1},\mathbf{b}_{0:L-1}\} where W0:l−1(z)\mathbf{W}^{(z)}_{0:l-1} are non-negative. For ensuring C2 continuity, the activation function Ai(⋅)\mathcal{A}_i(\cdot) is chosen to be the softplus function and the positive weights are enforced by wrapping the weights Wi(z)\mathbf{W}^{(z)}_i in with a squared softplus function, following As’ad et al. [4].

As noted in 2.1, one basic requirement in hyperelastic material modeling is that the strain energy density function ψ\psi is polyconvex. Namely,

ψ~(F)=G(F,cof⁡F,det⁡F)(35)\widetilde{\psi}(\mathbf{F}) = \mathcal{G}(\mathbf{F}, \operatorname{cof}\mathbf{F}, \det\mathbf{F}) \tag*{(35)}

where G(⋅)\mathcal{G}(\cdot) is a convex function in (F,cof⁡F,det⁡F)(F,\operatorname{cof} F,\det F). In conventional constitutive modeling, the strain energy density function is often expressed as a (convex) function of the invariants of an objective strain measure. The classic example of this corresponds to the invariants ι={IC1,IC2,IC3}\iota= \{I_{C1}, I_{C2}, I_{C3}\} of the right Cauchy-Green tensor, C=FTFC = F^{T}F, since they satisfy polyconvexity and have desirable symmetry features. However, such invariants cannot be used as input in the original ICNN implementation. The first layer and the passthrough layers involve an unrestricted transformation (A.2) with weights that can be positive or negative, which when applied to the invariants, does not preserve convexity in the original parameters. Therefore, if it is desired to use the invariants, the treatment should be in accordance with the convex non-decreasing composition (A.3), which implies that the transformation (A.2) should be restricted to non-negative weights. However, if the invariant J=IC3=det⁡FJ = \sqrt{I_{C3}} = \det F is used instead of IC3I_{C3}, there need not be any restrictions on the specific weights mapping JJ. In effect, when using invariants as input, the ICNN should be modified such that it results in a convex function that is convex non-decreasing in the invariants.

A similar argument holds when using the principal stretches or any of its convex combinations as input, as shown in Appendix B. The only exception to this is the invariant JJ, since the strain energy density function need not be non-decreasing in JJ. The modified version of the ICNN per Chen et al. [16] provides a straightforward implementation for handling convexity and ensuring that the output is non-decreasing in particular inputs. In this definition, an ICNN is expressed as a function, f(y;θ)f(y;\theta) defined by:

zi+1=Ai(Wi(z)zi+Wi(y^)y^+bi)for i=0,…,l−1f(y^,θ)=zl(36)\begin{aligned} z_{i+1} &= \mathcal{A}_i\left(W_i^{(z)}z_i + W_i^{(\hat{y})}\hat{y} + b_i\right) \quad\text{for } i=0,\ldots,l-1 \\ f(\hat{y},\theta) &= z_l \tag*{(36)} \end{aligned}

where y^\hat{y} represents the expanded input y^=[y,−y]\hat{y}=[y,-y], ziz_i denotes the layers (with z0,W0(z)≡0z_0, W_0^{(z)} \equiv0) to which convex and non-decreasing element-wise activation functions Ai(⋅)\mathcal{A}_i(\cdot) are applied, and θ={W0:l−1(z),W1:l−1(y^),b0:L−1}\theta=\{W_{0:l-1}^{(z)}, W_{1:l-1}^{(\hat{y})}, b_{0:L-1}\} denotes the learnable parameters where W0:l−1(z)W_{0:l-1}^{(z)} and W0:l−1(y^)W_{0:l-1}^{(\hat{y})} are non-negative. Since all layers, including the passthrough layers, have non-negative weights, if the expanded input is not used (i.e. y^≡y\hat{y}\equiv y), the output of the ICNN as defined by Chen et al. [16] becomes convex and non-decreasing in the inputs. By not using the expanded inputs, except for JJ, the ICNN (A.6) can be used to model hyperelastic materials with strain energy density functions that are convex in JJ and convex non-decreasing in the remaining inputs.

Amongst the ICNN based neural network models for hyperelasticity present in literature, Linden et al. [34] and their subsequent works have addressed this aspect by having non-negative weights overall, however the authors omit the skip connections presented in Chen et al. [16].

Limitations of invariant-based ICNN models

When choosing a set of invariants as inputs, an ICNN should be convex, non-decreasing in those invariants (except for JJ, as ψ\psi need not be non-decreasing in JJ) c.f. Appendix § 7. We theorize that such an ICNN would be limited in its ability to model an arbitrary polyconvex strain energy density function ψ\psi.

Here, we limit the current discussion to isotropic case where the conditions discussed in (6) hold. We aim to provide a simple counter example to show that a strain energy density in accordance with (6) cannot always be represented by a composition of convex and non-decreasing functions of pre-chosen invariants (convex in JJ). Consider the Ogden model Holzapfel [26] which has a strain energy density function given by:

ψO(F)=ψiso(λˉ1,λˉ2,λˉ3)+ψvol(J)={∑i=1Nμiai(λˉ1ai+λˉ2ai+λˉ3ai−3)}+κβ2(βln⁡J+J−β−1)(37)\begin{aligned} \psi_O(F)=\psi_{\mathrm{iso}}(\bar{\lambda}_1,\bar{\lambda}_2,\bar{\lambda}_3)+\psi_{\mathrm{vol}}(J) \\ &= \left\{\sum_{i=1}^{N}\frac{\mu_i}{a_i}\left(\bar{\lambda}_1^{a_i}+\bar{\lambda}_2^{a_i}+\bar{\lambda}_3^{a_i}-3\right)\right\}+\frac{\kappa}{\beta^2}\left(\beta\ln J+J^{-\beta}-1\right) \tag*{(37)} \end{aligned}

We adopt β=−2\beta=-2 as in Simo and Miehe [47]. For the sake of simplicity, we consider the case of N=1N=1, a1=a=6a_1=a=6, and replace μ1=μ\mu_1=\mu. Note that λˉi=J−1/3λi\bar{\lambda}_i=J^{-1/3}\lambda_i and J=λ1λ2λ3J=\lambda_1\lambda_2\lambda_3. Then we have:

ψO(F)=μ6(λ156+λ256+λ356−3)+κ4(J2−1−2ln⁡J)=μ6(J−2(λ16+λ26+λ36)−3)+κ4(J2−1−2ln⁡J)(38)\psi_O(\mathbf{F}) = \frac{\mu}{6}(\lambda_1^{56}+\lambda_2^{56}+\lambda_3^{56}-3)+\frac{\kappa}{4}(J^2-1-2\ln J) = \frac{\mu}{6}(J^{-2}(\lambda_1^6+\lambda_2^6+\lambda_3^6)-3)+\frac{\kappa}{4}(J^2-1-2\ln J) \tag*{(38)}

This model is polyconvex by definition in (6), however this can also be verified with a simple test. The strain energy density (B.2) should be convex non-decreasing in {λ1,λ2,λ3}\{\lambda_1,\lambda_2,\lambda_3\} and convex in JJ. Let us obtain the derivatives of the strain energy density function (B.2) with respect to Λ={λ1,λ2,λ3,J}\boldsymbol{\Lambda}=\{\lambda_1,\lambda_2,\lambda_3,J\}:

∇ΛψO=[μJ−2λ15μJ−2λ25μJ−2λ35−13μJ−3(λ16+λ26+λ36)+κ2(J−J−1)](39)\nabla_{\boldsymbol{\Lambda}}\psi_O = \begin{bmatrix} \mu J^{-2}\lambda_1^5 \\ \mu J^{-2}\lambda_2^5 \\ \mu J^{-2}\lambda_3^5 \\ -\frac{1}{3}\mu J^{-3}(\lambda_1^6+\lambda_2^6+\lambda_3^6)+\frac{\kappa}{2}(J-J^{-1}) \end{bmatrix} \tag*{(39)}

For all μ>0\mu>0, the derivatives of {λ1,λ2,λ3}\{\lambda_1,\lambda_2,\lambda_3\} are non-negative. Hence the strain energy density function (B.2) satisfies the non-decreasing condition in {λ1,λ2,λ3}\{\lambda_1,\lambda_2,\lambda_3\}.

The hessian of the strain energy density function (B.2) with respect to Λ\boldsymbol{\Lambda} is:

∇Λ2ψO=[5μJ−2λ1400−2μJ−3λ1505μJ−2λ240−2μJ−3λ25005μJ−2λ34−2μJ−3λ35−2μJ−3λ15−2μJ−3λ25−2μJ−3λ35μJ−4(λ16+λ26+λ36)+κ2(1+J−2)](40)\nabla_{\boldsymbol{\Lambda}}^2\psi_O = \begin{bmatrix} 5\mu J^{-2}\lambda_1^4 & 0 & 0 & -2\mu J^{-3}\lambda_1^5 \\ 0 & 5\mu J^{-2}\lambda_2^4 & 0 & -2\mu J^{-3}\lambda_2^5 \\ 0 & 0 & 5\mu J^{-2}\lambda_3^4 & -2\mu J^{-3}\lambda_3^5 \\ -2\mu J^{-3}\lambda_1^5 & -2\mu J^{-3}\lambda_2^5 & -2\mu J^{-3}\lambda_3^5 & \mu J^{-4}(\lambda_1^6+\lambda_2^6+\lambda_3^6)+\frac{\kappa}{2}(1+J^{-2}) \end{bmatrix} \tag*{(40)}

The principal minors M11,M22,M33M_{11},M_{22},M_{33} are clearly positive for μ>0\mu>0. It is therefore sufficient that M44>0M_{44}>0 for the hessian (B.4) to be positive semi-definite. Checking this, we have:

M44=∣5μJ−2λ1400−2μJ−3λ1505μJ−2λ240−2μJ−3λ25005μJ−2λ34−2μJ−3λ35−2μJ−3λ15−2μJ−3λ25−2μJ−3λ35μJ−4(λ16+λ26+λ36)+κ2(1+J−2)∣(41)M_{44} = \begin{vmatrix} 5\mu J^{-2}\lambda_1^4 & 0 & 0 & -2\mu J^{-3}\lambda_1^5 \\ 0 & 5\mu J^{-2}\lambda_2^4 & 0 & -2\mu J^{-3}\lambda_2^5 \\ 0 & 0 & 5\mu J^{-2}\lambda_3^4 & -2\mu J^{-3}\lambda_3^5 \\ -2\mu J^{-3}\lambda_1^5 & -2\mu J^{-3}\lambda_2^5 & -2\mu J^{-3}\lambda_3^5 & \mu J^{-4}(\lambda_1^6+\lambda_2^6+\lambda_3^6)+\frac{\kappa}{2}(1+J^{-2}) \end{vmatrix} \tag*{(41)}

which, after simplification, produces:

M44=25μ32J−6(2μ(λ16+λ26+λ36)+5κ(J4+J2))(42)M_{44}=\frac{25\mu^3}{2}J^{-6}\left(2\mu(\lambda_1^6+\lambda_2^6+\lambda_3^6)+5\kappa(J^4+J^2)\right) \tag*{(42)}

For μ,κ>0\mu,\kappa>0, the minor M44M_{44} is positive. Hence the strain energy density function (B.2) is convex in Λ\boldsymbol{\Lambda}.

Now, let the chosen invariants be ı~={IC1,IC2,J}\tilde{\boldsymbol{\imath}}=\{I_{C1},I_{C2},J\}:

IC1=λ12+λ22+λ32IC2=λ12λ22+λ22λ32+λ32λ12J=λ1λ2λ3(43)\begin{aligned} I_{C1} &= \lambda_1^2+\lambda_2^2+\lambda_3^2 \\ I_{C2} &= \lambda_1^2\lambda_2^2+\lambda_2^2\lambda_3^2+\lambda_3^2\lambda_1^2 \\ J &= \lambda_1\lambda_2\lambda_3 \tag*{(43)} \end{aligned}

The strain energy density function (B.2) can be expressed as a function of these invariants as:

ψ~O(ı~)=μ6(J−2(IC13−3IC1IC2+3J2)−3)+κ4(J2−1−2ln⁡J)=μ6J−2(IC13−3IC1IC2)+κ4(J2−1−2ln⁡J)(44)\begin{aligned} \tilde{\psi}_O(\tilde{\boldsymbol{\imath}}) &= \frac{\mu}{6}\left(J^{-2}(I_{C1}^3-3I_{C1}I_{C2}+3J^2)-3\right)+\frac{\kappa}{4}(J^2-1-2\ln J) \\ &= \frac{\mu}{6}J^{-2}(I_{C1}^3-3I_{C1}I_{C2})+\frac{\kappa}{4}(J^2-1-2\ln J) \tag*{(44)} \end{aligned}

Here, we provide the extra steps for clarity:

IC13=(λ12+λ22+λ32)3=λ16+λ26+λ36+3(λ14λ22+λ12λ24+λ24λ32+λ22λ34+λ34λ12+λ32λ14)+6λ12λ22λ32IC1IC2=(λ12+λ22+λ32)(λ12λ22+λ22λ32+λ32λ12)=λ14λ22+λ12λ22λ32+λ14λ32+λ24λ12+λ12λ22λ32+λ24λ32+λ12λ22λ32+λ34λ22+λ34λ12=(λ14λ22+λ24λ12+λ24λ32+λ34λ22+λ34λ12+λ14λ32)+3λ12λ22λ323IC1IC2=3(λ14λ22+λ12λ24+λ24λ32+λ22λ34+λ34λ12+λ32λ14)+9λ12λ22λ32IC13−3IC1IC2=λ16+λ26+λ36−3λ12λ22λ323J2=3λ12λ22λ32IC13−3IC1IC2+3J2=λ16+λ26+λ36(45)\begin{aligned} I_{C1}^{3} &= \left(\lambda_{1}^{2}+\lambda_{2}^{2}+\lambda_{3}^{2}\right)^{3}\\ &= \lambda_{1}^{6}+\lambda_{2}^{6}+\lambda_{3}^{6}\\ &\quad+3\left(\lambda_{1}^{4}\lambda_{2}^{2}+\lambda_{1}^{2}\lambda_{2}^{4}+\lambda_{2}^{4}\lambda_{3}^{2}+\lambda_{2}^{2}\lambda_{3}^{4}+\lambda_{3}^{4}\lambda_{1}^{2}+\lambda_{3}^{2}\lambda_{1}^{4}\right)+6\lambda_{1}^{2}\lambda_{2}^{2}\lambda_{3}^{2}\\ I_{C1}I_{C2} &= \left(\lambda_{1}^{2}+\lambda_{2}^{2}+\lambda_{3}^{2}\right)\left(\lambda_{1}^{2}\lambda_{2}^{2}+\lambda_{2}^{2}\lambda_{3}^{2}+\lambda_{3}^{2}\lambda_{1}^{2}\right)\\ &= \lambda_{1}^{4}\lambda_{2}^{2}+\lambda_{1}^{2}\lambda_{2}^{2}\lambda_{3}^{2}+\lambda_{1}^{4}\lambda_{3}^{2}\\ &\quad+\lambda_{2}^{4}\lambda_{1}^{2}+\lambda_{1}^{2}\lambda_{2}^{2}\lambda_{3}^{2}+\lambda_{2}^{4}\lambda_{3}^{2}\\ &\quad+\lambda_{1}^{2}\lambda_{2}^{2}\lambda_{3}^{2}+\lambda_{3}^{4}\lambda_{2}^{2}+\lambda_{3}^{4}\lambda_{1}^{2}\\ &= \left(\lambda_{1}^{4}\lambda_{2}^{2}+\lambda_{2}^{4}\lambda_{1}^{2}+\lambda_{2}^{4}\lambda_{3}^{2}+\lambda_{3}^{4}\lambda_{2}^{2}+\lambda_{3}^{4}\lambda_{1}^{2}+\lambda_{1}^{4}\lambda_{3}^{2}\right)+3\lambda_{1}^{2}\lambda_{2}^{2}\lambda_{3}^{2}\\ 3I_{C1}I_{C2} &= 3\left(\lambda_{1}^{4}\lambda_{2}^{2}+\lambda_{1}^{2}\lambda_{2}^{4}+\lambda_{2}^{4}\lambda_{3}^{2}+\lambda_{2}^{2}\lambda_{3}^{4}+\lambda_{3}^{4}\lambda_{1}^{2}+\lambda_{3}^{2}\lambda_{1}^{4}\right)+9\lambda_{1}^{2}\lambda_{2}^{2}\lambda_{3}^{2}\\ I_{C1}^{3}-3I_{C1}I_{C2} &= \lambda_{1}^{6}+\lambda_{2}^{6}+\lambda_{3}^{6}-3\lambda_{1}^{2}\lambda_{2}^{2}\lambda_{3}^{2}\\ 3J^{2} &= 3\lambda_{1}^{2}\lambda_{2}^{2}\lambda_{3}^{2}\\ I_{C1}^{3}-3I_{C1}I_{C2}+3J^{2} &= \lambda_{1}^{6}+\lambda_{2}^{6}+\lambda_{3}^{6} \tag*{(45)} \end{aligned}

The derivative of the strain energy density function (B.8) with respect to these invariants is:

∇ιˉψˉO=[μ2J−2(IC12−IC2)−μ2J−2IC1−μ3J−3(IC13−3IC1IC2)+κ2(J−J−1)](46)\nabla_{\bar{\iota}}\bar{\psi}_{O}= \begin{bmatrix} \frac{\mu}{2}J^{-2}(I_{C1}^{2}-I_{C2})\\ -\frac{\mu}{2}J^{-2}I_{C1}\\ -\frac{\mu}{3}J^{-3}(I_{C1}^{3}-3I_{C1}I_{C2})+\frac{\kappa}{2}(J-J^{-1}) \end{bmatrix} \tag*{(46)}

The derivative w.r.t IC2I_{C2} is negative for all IC1I_{C1} for any μ>0\mu> 0. This implies that the strain energy density function (B.8) is not non-decreasing in IC2I_{C2}. Differentiating again, we obtain the Hessian of the strain energy density function (B.8) with respect to these invariants:

∇ιˉ2ψˉO=[μJ−2IC1−μ2J−2−μJ−3(IC12−IC2)−μ2J−20μJ−3IC1−μJ−3(IC12−IC2)μJ−3IC1μJ−4(IC13−3IC1IC2)+κ2(1+J−2)](47)\nabla_{\bar{\iota}}^{2}\bar{\psi}_{O}= \begin{bmatrix} \mu J^{-2}I_{C1} & -\frac{\mu}{2}J^{-2} & -\mu J^{-3}(I_{C1}^{2}-I_{C2})\\ -\frac{\mu}{2}J^{-2} & 0 & \mu J^{-3}I_{C1}\\ -\mu J^{-3}(I_{C1}^{2}-I_{C2}) & \mu J^{-3}I_{C1} & \mu J^{-4}(I_{C1}^{3}-3I_{C1}I_{C2})+\frac{\kappa}{2}(1+J^{-2}) \end{bmatrix} \tag*{(47)}

The principal minors of the Hessian (B.8) are:

M11=μJ−2IC1,M_{11}=\mu J^{-2}I_{C1},
M22=−μ4J−4<0,M_{22}=-\frac{\mu}{4}J^{-4}<0,
M33=−μ28J−8(2μ(IC13+IC1IC2)+κJ2(1+J2))=−[μ34J−8(IC13+IC1IC2)+μ2κ8J−6(1+J2)]<0,(48)\begin{aligned} M_{33}&=-\frac{\mu^{2}}{8}J^{-8}\left(2\mu(I_{C1}^{3}+I_{C1}I_{C2})+\kappa J^{2}(1+J^{2})\right)\\ &=-\left[\frac{\mu^{3}}{4}J^{-8}(I_{C1}^{3}+I_{C1}I_{C2})+\frac{\mu^{2}\kappa}{8}J^{-6}(1+J^{2})\right]<0, \tag*{(48)} \end{aligned}

two of which are negative for any μ,κ>0\mu,\kappa> 0. This implies that the Hessian is not positive semi-definite and, consequently, that the strain energy density function (B.8) is not convex in IC1,IC2I_{C1},I_{C2}.

Hence we argue that an ICNN that is convex and non-decreasing in the invariants IC1,IC2,JI_{C1},I_{C2},J will not be able to represent the strain energy density function (B.2). On the contrary, for isotropic hyperelasticity, if we built an ICNN that satisfied (6) directly, then it would be able to represent any arbitrary isotropic hyperelastic strain energy density function, given a sufficient number of layers and neurons. This can be achieved using an ICNN (A.6) with the input y^=Λ={λ1,λ2,λ3,λ1λ2,λ2λ3,λ3λ1,J,−J}\hat{y}=\Lambda=\{\lambda_{1},\lambda_{2},\lambda_{3},\lambda_{1}\lambda_{2},\lambda_{2}\lambda_{3},\lambda_{3}\lambda_{1},J,-J\} with symmetric enforcing Wi(y^)W_{i}^{(\hat{y})} through weight sharing for all the direct connections from the input (i.e. first layer and all the passthrough layers). Thus, Wi(λ1)=Wi(λ2)=Wi(λ3)W_{i}^{(\lambda_{1})}=W_{i}^{(\lambda_{2})}=W_{i}^{(\lambda_{3})} and Wi(λ1λ2)=Wi(λ2λ3)=Wi(λ3λ1)W_{i}^{(\lambda_{1}\lambda_{2})}=W_{i}^{(\lambda_{2}\lambda_{3})}=W_{i}^{(\lambda_{3}\lambda_{1})} for i=0,…,l−1i=0,\ldots,l-1 in (A.6).

Derivation of the stress correction term for the isotropic hyperelastic neural network model

The starting point for the derivation is due to the observation made in Linden et al. [34] that a stress correction term N0stress\mathcal{N}^{\mathrm{stress}}_{0} of the form:

N0stress(E)=−∂EN(Λ~(E))∣E=0:E(49)\mathcal{N}^{\mathrm{stress}}_{0}(\mathbf{E})=-\left.\partial_{\mathbf{E}}\mathcal{N}(\widetilde{\boldsymbol{\Lambda}}(\mathbf{E}))\right|_{\mathbf{E}=0}:\mathbf{E} \tag*{(49)}

violates the polyconvexity and material symmetry conditions. As an alternative, they propose a stress correction term based on a weighted sum of derivatives method, where the weights are obtained via exploiting the chain rule and the behavior of derivative of strain invariants at undeformed state. Here we adapt this approach to the principal stretch based isotropic hyperelastic neural network model we have developed.

Recall the input to the model Λ~={λ1,λ2,λ3,λ1λ2,λ2λ3,λ3λ1,J,−J,−ln⁡J}\widetilde{\boldsymbol{\Lambda}}=\{\lambda_{1},\lambda_{2},\lambda_{3},\lambda_{1}\lambda_{2},\lambda_{2}\lambda_{3},\lambda_{3}\lambda_{1},J,-J,-\ln J\} as proposed in § 2.2. Due to the symmetry enforcement method, the derivative of the neural network output N\mathcal{N} with respect to the input Λ~\widetilde{\boldsymbol{\Lambda}} respects the enforced symmetry. As, a result, we can consider a stress correction term for the strain energy function of the form:

N0stress=−∑i=19∂Λ~iN(Λ(E))∣E=0(Λ~i−Λ~i0)(50)\mathcal{N}^{\mathrm{stress}}_{0}=-\left.\sum_{i=1}^{9}\partial_{\widetilde{\Lambda}_{i}}\mathcal{N}(\boldsymbol{\Lambda}(\mathbf{E}))\right|_{\mathbf{E}=0}(\widetilde{\Lambda}_{i}-\widetilde{\Lambda}_{i}^{0}) \tag*{(50)}

The corresponding stress contribution could be obtained by the chain rule as:

S0stress=−∑i=19∂Λ~iN(Λ~(E))∣E=0∂EΛ~i(51)\mathbf{S}^{\mathrm{stress}}_{0}=-\left.\sum_{i=1}^{9}\partial_{\widetilde{\Lambda}_{i}}\mathcal{N}(\widetilde{\boldsymbol{\Lambda}}(\mathbf{E}))\right|_{\mathbf{E}=0}\partial_{\mathbf{E}}\widetilde{\Lambda}_{i} \tag*{(51)}

Due to symmetry enforcement, the above expression simplifies to:

S0stress=−(∑i=13h1∂EΛ~i+∑j=46h2∂EΛ~j+h3∂EΛ~7+h4∂EΛ~8+h5∂EΛ~9)(52)\mathbf{S}^{\mathrm{stress}}_{0}=-\left(\sum_{i=1}^{3}h_{1}\partial_{\mathbf{E}}\widetilde{\Lambda}_{i}+\sum_{j=4}^{6}h_{2}\partial_{\mathbf{E}}\widetilde{\Lambda}_{j}+h_{3}\partial_{\mathbf{E}}\widetilde{\Lambda}_{7}+h_{4}\partial_{\mathbf{E}}\widetilde{\Lambda}_{8}+h_{5}\partial_{\mathbf{E}}\widetilde{\Lambda}_{9}\right) \tag*{(52)}

which when evaluated at E=0\mathbf{E}=0 gives:

S0stress∣E=0=−(h11+2h21+h31−h41−h51)=−(h1+2h2+h3−h4−h5)1where\begin{aligned} \left.\mathbf{S}^{\mathrm{stress}}_{0}\right|_{\mathbf{E}=0}=-(h_{1}\mathbf{1}+2h_{2}\mathbf{1}+h_{3}\mathbf{1}-h_{4}\mathbf{1}-h_{5}\mathbf{1}) \\ &=-(h_{1}+2h_{2}+h_{3}-h_{4}-h_{5})\mathbf{1}\quad\text{where} \end{aligned}
h1=∂Λ~1N∣E=0=∂Λ~2N∣E=0=∂Λ~3N∣E=0,h_{1}=\left.\partial_{\widetilde{\Lambda}_{1}}\mathcal{N}\right|_{\mathbf{E}=0}=\left.\partial_{\widetilde{\Lambda}_{2}}\mathcal{N}\right|_{\mathbf{E}=0}=\left.\partial_{\widetilde{\Lambda}_{3}}\mathcal{N}\right|_{\mathbf{E}=0},
h2=∂Λ~4N∣E=0=∂Λ~5N∣E=0=∂Λ~6N∣E=0,h_{2}=\left.\partial_{\widetilde{\Lambda}_{4}}\mathcal{N}\right|_{\mathbf{E}=0}=\left.\partial_{\widetilde{\Lambda}_{5}}\mathcal{N}\right|_{\mathbf{E}=0}=\left.\partial_{\widetilde{\Lambda}_{6}}\mathcal{N}\right|_{\mathbf{E}=0},
h3=∂Λ~7N∣E=0;h4=∂Λ~8N∣E=0;h5=∂Λ~9N∣E=0(53)h_{3}=\left.\partial_{\widetilde{\Lambda}_{7}}\mathcal{N}\right|_{\mathbf{E}=0};\quad h_{4}=\left.\partial_{\widetilde{\Lambda}_{8}}\mathcal{N}\right|_{\mathbf{E}=0};\quad h_{5}=\left.\partial_{\widetilde{\Lambda}_{9}}\mathcal{N}\right|_{\mathbf{E}=0} \tag*{(53)}

Note that the stress contribution S0stress\mathbf{S}^{\mathrm{stress}}_{0} coming from the correction term N0stress\mathcal{N}^{\mathrm{stress}}_{0} is not polyconvex. However, we can exploit the fact that an affine transformation of JJ preserves polyconvexity, and the fact that the derivative of ∂EJ=JC−1\partial_{\mathbf{E}}J=J\mathbf{C}^{-1}, which when evaluated at E=0\mathbf{E}=0 becomes identity 1\mathbf{1}, to arrive at a polyconvex stress correction term. The polyconvex alternative that results in the requisite stress contribution at E=0\mathbf{E}=0 as given in (C.5) may be obtained by defining a stress correction term:

N0stress=−∑i=19ξi∂Λ~iN(Λ~(E))∣E=0(J−1)(54)\mathcal{N}^{\mathrm{stress}}_{0}=-\sum_{i=1}^{9}\xi_{i}\partial_{\widetilde{\Lambda}_{i}}\mathcal{N}(\widetilde{\boldsymbol{\Lambda}}(\mathbf{E}))\big|_{\mathbf{E}=0}(J-1) \tag*{(54)}

where ξ={13,13,13,23,23,23,1,−1,1}\xi=\left\{\frac{1}{3},\frac{1}{3},\frac{1}{3},\frac{2}{3},\frac{2}{3},\frac{2}{3},1,-1,1\right\} are the weights that result in the requisite stress contribution as in (C.5). The corresponding stress contribution can be obtained as:

Figure D.13. (a) Portal frame BVP (b) Deformation of the design obtained using the ML model (c) Difference plot of the design obtained using the ML model to the design obtained using the ground truth phenomenological model.

S0stress=−∑i=19ξi∂Λ~iN(Λ~(E))∣E=0JC−1(55)S_0^{\mathrm{stress}}=-\sum_{i=1}^{9}\xi_i\partial_{\tilde{\Lambda}_i}\mathcal{N}\left(\tilde{\Lambda}(\mathbf{E})\right)\bigg|_{\mathbf{E}=0}\mathbf{J}\mathbf{C}^{-1} \tag*{(55)}

It can be clearly seen that evaluation of (C.7) at E=0\mathbf{E}=0 gives the desired stress correction term as in (C.5):

S0stress∣E=0=−∑i=19ξi∂Λ~iN(Λ~(E))∣E=01=−∑i=19ξihi1=−(h1+2h2+h3−h4−h5)1(56)\begin{aligned} S_0^{\mathrm{stress}}\bigg|_{\mathbf{E}=0}=-\sum_{i=1}^{9}\xi_i\partial_{\tilde{\Lambda}_i}\mathcal{N}\left(\tilde{\Lambda}(\mathbf{E})\right)\bigg|_{\mathbf{E}=0}\mathbf{1} \\ &=-\sum_{i=1}^{9}\xi_i\mathbf{h}_i\mathbf{1} \\ &=-(h_1+2h_2+h_3-h_4-h_5)\mathbf{1} \tag*{(56)} \end{aligned}

Additional topology optimization examples assessing ML material model

Single scale topology optimization: Portal frame example

Next we consider a 2D portal frame with the design domain as shown in Figure D.13(a). Due to the symmetry present in the geometry and loading conditions, only half of the domain is considered for the TO problem. The support leg of the portal frame is fixed in the vertical direction and the horizontal displacement is constrained on the edge subject to the symmetry condition. A vertically downward average applied displacement cN=0.2Lc_N=0.2L is applied at center of the portal frame. The domain is discretized using 4 noded quadrilateral elements with a unstructured mesh of nominal edge length 0.5 mm adding up to a total of 28902 elements. The TO problem is formulated with the objective of maximizing the external work done by the applied displacement, subject to a material volume fraction constraint set by gmax⁡=0.5g_{\max}=0.5.

The convergence history of the objective function for the portal frame in Figure D.14 shows that the optimization process using the ML model and the ground truth phenomenological model progresses in a similar manner. The objective curves as well as the curves representing the continuation scheme overlap, which results in the intermediate as well as the final designs (see Figure D.14) obtained using the two material models being almost identical. The difference plot in Figure D.13(c) reinforces this observation. Figure D.13(b) shows the magnitude of deformation of the final design obtained using the ML model in its deformed state.

Convergence history and visualized designs for the portal frame topology optimization problem

Figure D.14. Convergence history for portal frame TO problem. Visualized designs correspond to those corresponding to TO using ML model at iterations where critical continuation parameter updates occur.

Multi-scale topology optimization: Portal frame example

The portal frame example with varying microstructure and the baseline fixed microstructure are set up with the same side constraint bounds as the T bracket example discussed above. Visible differences are observed in the final topologies between the varying microstructure and fixed microstructure cases, with the former containing 13 void regions and the latter containing 15. The difference plot in Figure D.15b highlights that although the external outline of the designs are similar, there is considerable rearrangement of the material in the internal regions of the designs. Similar to the T bracket example, allowing the microstructure to vary results in a lower objective value. The convergence history for the portal frame example in Figure D.15c shows that the baseline case with fixed microstructure undergoes a delayed update in the continuation scheme corresponding to the update in the penalty parameter p=3p = 3. This induces a rightward shift in the convergence history when compared with the case with varying microstructure. Consistent with the observations in the T bracket example, the final design with varying microstructure (Figure D.15a) has material addition predominantly occurring close to regions with lower inclusion volume fraction α\alpha and material removal happening close to regions with higher inclusion volume fractions.

Single scale topology optimization: 3D Benchmark example with fixed-fixed beam

Finally we consider a 3D fixed-fixed beam with the design domain as shown in Figure D.16(a). The primary intention of considering this example is to assess the “sensitivity” of the optimization process to the differences in the phenomenological model and the ML model, as well as to show that the framework is easily extended to 3D problems. In order to train a 3D ML model, we employed the design of experiment approach described in § 5.1 to generate the training dataset D3Ds\mathcal{D}_{3D}^{s} consisting of 213=81922^{13} = 8192 sample strain states by considering the spatial dimensionality ND=3N_D = 3.

Deformed configuration, difference plot, and convergence history for the portal frame topology optimization problem

Figure D.15. (a) Deformed configuration of the final design obtained using the ML model with varying microstructure (b) Difference plot between the design obtained with varying microstructure and the design obtained with fixed microstructure. (c) Convergence history for the portal frame TO problem with varying microstructure vs. fixed microstructure

The beam is fixed along the left and the right faces and a downward average applied displacement cN=0.3Lc_N = 0.3L is applied at the center of the beam’s top surface. Due to symmetry in the geometry and loading conditions, only a quarter of the domain is considered for this example. The domain is discretized using 8-node hexahedral elements with a uniform mesh of edge length 2 mm adding up to a total of 16250 elements. A volume fraction constraint upper bound of gmax⁡=0.3g_{\max} = 0.3 is imposed in this example. The optimization parameters are as shown in Table 3, with the exception of the number of time steps, which is set to 15 for this example.

We observe that the final objective values using the ML model and the ground truth phenomenological model are almost identical. The difference plot in Figure D.16(c) shows no significant material addition or deletion in the final design obtained using the ML model compared to the design obtained using the ground truth phenomenological model. The convergence history for the ML model shows minor differences, however the lateral shift is caused by

HyperparameterValueHyperparameterValueHyperparameterValue
No. hidden layers2Exponential decay rate0.5Max epochs15000
No. neurons per layer8Decay transition epoch interval1000Batch size128
Initial learning rate1×10−21 \times10^{-2}Decay end value5×10−45 \times10^{-4}Early stopping patience5000

Table D.4. Model and training hyperparameters

ModelMetricTraining DatasetValidation DatasetTest Dataset
M3Ds\mathcal{M}_{3D}^{s}1−R21 - R^22.06×10−52.06 \times10^{-5}2.03×10−52.03 \times10^{-5}2.15×10−52.15 \times10^{-5}
RMSE4.63×10−34.63 \times10^{-3}4.60×10−34.60 \times10^{-3}4.61×10−34.61 \times10^{-3}
MAE3.05×10−33.05 \times10^{-3}3.05×10−33.05 \times10^{-3}3.05×10−33.05 \times10^{-3}

Table D.5. Performance metrics of the trained model

Figure D.16. (a) Fixed-fixed beam BVP (b) Deformation of the design obtained using the ML model (c) Difference plot of the design obtained using the ML model to the design obtained using the ground truth phenomenological model. A transparent shadow of the design obtained using the phenomenological model is overlaid on the difference plot for reference.

Convergence history for the fixed-fixed beam 3D TO benchmark

Figure D.17. Convergence history for the fixed-fixed beam 3D TO benchmark.

slight delays in convergence within each continuation segment.

Nomenclature

Abbreviations

R2R^2 Coefficient of determination

FE2FE^2 Finite element squared

3D Three-dimensional

AM Additive manufacturing

FEM Finite element method

FFN Feed-forward neural network

ICNN Input convex neural network

MAE Mean absolute error

ML Machine learning

NN Neural network

PICNN Partial input convex neural network

RMSE Root mean squared error

RVE Representative volume element

SIMP Solid Isotropic Material with Penalization

TO Topology optimization

List of Symbols

α\alpha Inclusion volume fraction

ρˉ,ρˉe\bar{\rho},\bar{\rho}_e Projected pseudo-density design variable and its element-wise value

B\mathbf{B} Left Cauchy-Green deformation tensor

C\mathbf{C} Right Cauchy-Green deformation

E\mathbf{E} Green-Lagrange strain

βψ\beta_{\psi} Projection strength parameter for the strain energy density interpolation factor

βρ\beta_{\rho} Projection strength parameter for the pseudo-density design variable

F\mathbf{F} Deformation gradient

Fγe\mathbf{F}_{\gamma e} Effective deformation gradient in element ee

heih_{ei} Linear filter function in filtering operation

Λ,Λ~\boldsymbol{\Lambda},\widetilde{\boldsymbol{\Lambda}} Principal stretch-based transformed input space for ICNN

P\mathbf{P} First Piola-Kirchhoff stress

ϕα,ϕijα\phi^{\alpha},\phi_{ij}^{\alpha} Filter matrix for the inclusion volume fraction design variable

ϕo,ϕeio\phi^{o},\phi^{o}_{ei}Filter matrix for the pseudo-density design variable
Q\mathbf{Q}Orthogonal transformation tensor
S\mathbf{S}Second Piola-Kirchhoff stress
Θ,Θe\boldsymbol{\Theta},\boldsymbol{\Theta}_{e}Set of design variables and element-wise set of design variables
φ,φe\varphi,\varphi_{e}Deformation field and its element-wise value
xe,xi\mathbf{x}_{e},\mathbf{x}_{i}Centroid of element ee and ii respectively
G,G~\mathcal{G},\widetilde{\mathcal{G}}Convex function
χe\chi_{e}SIMP interpolation factor for element ee
N,N0\mathcal{N},\mathcal{N}_{0}Output of the ICNN and correction term
T\mathcal{T}Transformation layer in the ICNN-based model
ϵ\epsilonSIMP ersatz parameter
ηψ\eta_{\psi}Projection threshold parameter for the strain energy density interpolation factor
ηρ\eta_{\rho}Projection threshold parameter for the pseudo-density design variable
γe\gamma_{e}Strain energy density interpolation factor for element ee
α^,α^e\hat{\alpha},\hat{\alpha}_{e}Filtered inclusion volume fraction design variable and its element-wise value
ρ^,ρ^e\hat{\rho},\hat{\rho}_{e}Filtered pseudo-density design variable and its element-wise value
λ1,λ2,λ3\lambda_{1},\lambda_{2},\lambda_{3}Principal stretches of the deformation gradient
⟨Pμ⟩\langle\mathbf{P}_{\mu}\rangleVolume averaged microscopic first Piola-Kirchhoff stress
cof⁡F\operatorname{cof}\mathbf{F}Cofactor of the deformation gradient
dmd_{m}Microstructural descriptor
∇ue\nabla\mathbf{u}_{e}Displacement gradient in element ee
∇sym\nabla_{\mathrm{sym}}Symmetric gradient operator
ψ,ψ^,ψ~\psi,\hat{\psi},\tilde{\psi}Strain energy density
ψe,γe\psi_{e,\gamma_{e}}Interpolated strain energy density in element ee
ψe\psi_{e}Strain energy density in element ee
ψL\psi_{L}Small deformation linear elastic strain energy density
ρ,ρe\rho,\rho_{e}Pseudo-density design variable and its element-wise value
eeElement index
JJDeterminant of the deformation gradient
ppSIMP penalization parameter
rρr_{\rho}Filter radius for the pseudo-density design variable

References

  1. [1]Allaire, G., Jouve, F., Toader, A.M., 2004. Structural optimization using sensitivity analysis and a level-set method. Journal of Computational Physics 194, 363–393. doi:10.1016/j.jcp.2003.09.032.DOI
  2. [2]Amos, B., Xu, L., Kolter, J.Z., 2017. Input convex neural networks, in: Precup, D., Teh, Y.W. (Eds.), Proceedings of the 34th International Conference on Machine Learning, PMLR. pp. 146–155. URL: https://proceedings.mlr.press/v70/amos17b.html.arxiv.org/abs/1609.07152
  3. [3]Arruda, E.M., Boyce, M.C., 1993. A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials. Journal of the Mechanics and Physics of Solids 41, 389–412. doi:10.1016/0022-5096(93)90013-6.DOI
  4. [4]As’ad, F., Avery, P., Farhat, C., 2022. A mechanics-informed artificial neural network approach in data-driven constitutive modeling. International Journal for Numerical Methods in Engineering 123, 2738–2759. doi:10.1002/nme.6957.DOI
  5. [5]Avazmohammadi, R., Ponte Castañeda, P., 2016. Macroscopic constitutive relations for elastomers reinforced with short aligned fibers: Instabilities and post-bifurcation response. Journal of the Mechanics and Physics of Solids 97, 37–67. doi:10.1016/j.jmps.2015.07.007.DOI
  6. [6]Ball, J.M., 1976. Convexity conditions and existence theorems in nonlinear elasticity. Archive for Rational Mechanics and Analysis 63, 337–403. doi:10.1007/bf00279992.DOI
  7. [7]Bendsøe, M.P., 1989. Optimal shape design as a material distribution problem. Structural Optimization 1, 193–202. doi:10.1007/bf01650949.DOI
  8. [8]Bendsøe, M.P., Kikuchi, N., 1988. Generating optimal topologies in structural design using a homogenization method. Computer Methods in Applied Mechanics and Engineering 71, 197–224. doi:10.1016/0045-7825(88)90086-2.DOI
  9. [9]Bergstrom, J.S., 2015. Mechanics of solid polymers: theory and computational modeling. Elsevier. doi:10.1016/c2013-0-15493-1.DOI
  10. [10]Bessa, M.A., Bostanabad, R., Liu, Z., Hu, A., Apley, D.W., Brinson, C., Chen, W., Liu, W.K., 2017. A framework for data-driven analysis of materials under uncertainty: Countering the curse of dimensionality. Computer Methods in Applied Mechanics and Engineering 320, 633–667.DOI
  11. [11]Bourdin, B., 2001. Filters in topology optimization. International Journal for Numerical Methods in Engineering 50, 2143–2158. doi:10.1002/nme.116.DOI
  12. [12]Boyd, S.P., Vandenberghe, L., 2004. Convex optimization. Cambridge university press.
  13. [13]Bradbury, J., Frostig, R., Hawkins, P., Johnson, M.J., Leary, C., Maclaurin, D., Necula, G., Paszke, A., VanderPlas, J., Wanderman-Milne, S., Zhang, Q., 2018. JAX: composable transformations of Python+NumPy programs. URL: http://github.com/google/jax.
  14. [14]Braides, A., 1994. Loss of polyconvexity by homogenization. Archive for Rational Mechanics and Analysis 127, 183–190. doi:10.1007/bf00377660.DOI
  15. [15]Chandrasekhar, A., Sridhara, S., Suresh, K., 2023. Graded multiscale topology optimization using neural networks. Advances in Engineering Software 175, 103359. doi:10.1016/j.advengsoft.2022.103359.DOI
  16. [16]Chen, Y., Shi, Y., Zhang, B., 2019. Topological control via neural networks: A convex approach, in: International Conference on Learning Representations. URL: https://openreview.net/forum?id=H1MW72AcK7.arxiv.org/abs/1805.11835
  17. [17]Chi, H., Zhang, Y., Tang, T.L.E., Mirabella, L., Dalloro, L., Song, J., Pan, G.H., 2021. Universal machine learning for topology optimization. Computer Methods in Applied Mechanics and Engineering 375, 112739. doi:10.1016/j.cma.2019.112739.DOI
  18. [18]Coleman, B.D., Noll, W., 1959. On the thermostatics of continuous media. Archive for Rational Mechanics and Analysis 4, 97–128. doi:10.1007/bf00281381.DOI
  19. [19]Cybenko, G., 1989. Approximation by superpositions of a sigmoidal function. Mathematics of Control, Signals, and Systems 2, 303–314. doi:10.1007/bf02551274.DOI
  20. [20]Dassault Systèmes, 2021. ABAQUS/Standard User’s Manual, Version 2021. Dassault Systèmes Simulia Corp, United States.
  21. [21]DeepMind, Babuschkin, I., Bauml, K., Bell, A., Bhu­patiraju, S., Bruce, J., Buchlovsky, P., Budden, D., Cai, T., Clark, A., Danihelka, I., Dedieu, A., Fantacci, C., Godwin, J., Jones, C., Hemsley, R., Henighan, T., Hessel, M., Hou, S., Kapturovski, S., Keck, T., Kemaev, I., King, M., Kunesch, M., Martens, L., Merzic, H., Mikulik, V., Norman, T., Papamakarios, G., Quan, J., Ring, R., Ruiz, F., Sanchez, A., Sartran, L., Schneider, R., Sezener, E., Spencer, S., Srinivasan, S., Stanojevic, M., Stokowiec, W., Wang, L., Zhou, G., Viola, F., 2020. The DeepMind JAX Ecosystem. URL: http://github.com/google-deepmind.
  22. [22]Gaynor, A.T., Meisel, N.A., Williams, C.B., Guest, J.K., 2014. Multiple-material topology optimization of compliant mechanisms created via polyjet three-dimensional printing. Journal of Manufacturing Science and Engineering 136. doi:10.1115/1.4028439.DOI
  23. [23]Ghaboussi, J., Garrett, J.H., Wu, X., 1991. Knowledge-based modeling of material behavior with neural networks. Journal of Engineering Mechanics 117, 132–153. doi:10.1061/(ASCE)0733-9399(1991)117:1(132).DOI
  24. [24]Groen, J.P., Sigmund, O., 2017. Homogenization-based topology optimization for high-resolution manufacturable microstructures. International Journal for Numerical Methods in Engineering 113, 1148–1163. doi:10.1002/nme.5575.DOI
  25. [25]Groen, J.P., Stutz, F.C., Aage, N., Bærentzen, J.A., Sigmund, O., 2020. De-homogenization of optimal multi-scale 3D topologies. Computer Methods in Applied Mechanics and Engineering 364, 112979. doi:10.1016/j.cma.2020.112979.DOI
  26. [26]Holzapfel, G.A., 2002. Nonlinear solid mechanics: a continuum approach for engineering science. Kluwer Academic Publishers Dordrecht.DOI
  27. [27]Hornik, K., Stinchcombe, M., White, H., 1989. Multilayer feedforward networks are universal approximators. Neural Networks 2, 359–366. doi:10.1016/0893-6080(89)90020-8.DOI
  28. [28]Kalina, K.A., Gebhart, P., Brummund, J., Lindén, L., Sun, W., Kästner, M., 2024. Neural network-based multiscale modeling of finite strain magneto-elasticity with relaxed convexity criteria. Computer Methods in Applied Mechanics and Engineering 421, 116739. doi:10.1016/j.cma.2023.116739.DOI
  29. [29]Kalina, K.A., Linden, L., Brummund, J., Kästner, M., 2023. FE ANN: an efficient data-driven multiscale approach based on physics-constrained neural networks and automated data mining. Computational Mechanics 71, 827–851. doi:10.1007/s00466-022-02260-0.DOI
  30. [30]Kidger, P., Garcia, C., 2021. Equinox: neural networks in JAX via callable PyTrees and filtered transformations. Differentiable Programming workshop at Neural Information Processing Systems 2021.arxiv.org/abs/2111.00254
  31. [31]Kingma, D.P., Ba, J., 2014. Adam: A method for stochastic optimization doi:10.48550/arXiv.1412.6980, arXiv:1412.6980.DOI
  32. [32]Klein, D.K., Fernández, M., Martin, R.J., Neff, P., Weeger, O., 2022. Polyconvex anisotropic hyperelasticity with neural networks. Journal of the Mechanics and Physics of Solids 159, 104703. doi:10.1016/j.jmps.2021.104703.DOI
  33. [33]Leon, S.E., Lages, E.N., de Araújo, C.N., Paulino, G.H., 2014. On the effect of constraint parameters on the generalized displacement control method. Mechanics Research Communications 56, 123–129. doi:10.1016/j.mechrescom.2013.12.009.DOI
  34. [34]Linden, L., Klein, D.K., Kalina, K.A., Brummund, J., Weeger, O., Kästner, M., 2023. Neural networks meet hyperelasticity: A guide to enforcing physics. Journal of the Mechanics and Physics of Solids 179, 105363. doi:10.1016/j.jmps.2023.105363.DOI
  35. [35]Loshchilov, I., Hutter, F., 2019. Decoupled weight decay regularization, in: International Conference on Learning Representations. URL: https://openreview.net/forum?id=Bkg6RiCqY7.
  36. [36]Morrey, C.B., 1952. Quasi-convexity and the lower semicontinuity of multiple integrals. Pacific J. Math. 2, 25–53.DOI
  37. [37]Morrey, C.B., 1966. Multiple integrals in the calculus of variations. Springer Berlin Heidelberg. doi:10.1007/978-3-540-69952-1.DOI
  38. [38]Mozaffar, M., Bostanabad, R., Chen, W., Ehmann, K., Cao, J., Bessa, M.A., 2019. Deep learning predicts path-dependent plasticity. Proceedings of the National Academy of Sciences 116, 26414–26420.DOI
  39. [39]Pantz, O., Trabelsi, K., 2008. A post-treatment of the homogenization method for shape optimization. SIAM Journal on Control and Optimization 47, 1380–1398. doi:10.1137/070688900.DOI
  40. [40]Sanders, E.D., Aguiló, M.A., Paulino, G.H., 2018a. Multi-material continuum topology optimization with arbitrary volume and mass constraints. Computer Methods in Applied Mechanics and Engineering 340, 798–823. doi:10.1016/j.cma.2018.01.032.DOI
  41. [42]Sanders, E.D., Pereira, A., Paulino, G.H., 2021. Optimal topology optimization of multifunctional lattice embedding. Science Advances 7. doi:10.1126/sciadv.abf4838.
  42. [43]van der Schelling, M., Ferreira, B., Bessa, M., 2024. f3dasm: Framework for data-driven design and analysis of structures and materials. Journal of Open Source Software 9, 6912.
  43. [44]Schumacher, C., Bickel, B., Rys, J., Marschner, S., Daraio, C., Gross, M., 2015. Microstructures to control elasticity in 3D printing. ACM Transactions on Graphics 34, 1–13. doi:10.1145/2766690.DOI
  44. [45]Senhora, F.V., Chi, H., Zhang, Y., Mirabella, L., Tang, T.L.E., Paulino, G.H., 2022. Machine learning for topology optimization: Physics-based learning through an independent training strategy. Computer Methods in Applied Mechanics and Engineering 398, 115116. doi:10.1016/j.cma.2022.115116.DOI
  45. [46]da Silva, G.A., Beck, A.T., Sigmund, O., 2019. Stress-constrained topology optimization considering uniform manufacturing uncertainties. Computer Methods in Applied Mechanics and Engineering 344, 512–537. doi:10.1016/j.cma.2018.10.020.DOI
  46. [47]Simo, J.C., Miehe, C., 1992. Associative coupled thermoplasticity at finite strains: Formulation, numerical analysis and implementation. Computer Methods in Applied Mechanics and Engineering 98, 41–104. doi:10.1016/0045-7825(92)90170-0.DOI
  47. [48]Svanberg, K., 1987. The method of moving asymptotes—a new method for structural optimization. International Journal for Numerical Methods in Engineering 24, 359–373. doi:10.1002/nme.1620240207.DOI
  48. [49]Treloar, L.R.G., 1944. Stress-strain data for vulcanised rubber under various types of deformation. Transactions of the Faraday Society 40, 59. doi:10.1039/tf9444000059.DOI
  49. [50]Wang, F., Lazarov, B.S., Sigmund, O., 2010. On projection methods, convergence and robust formulations in topology optimization. Structural and Multidisciplinary Optimization 43, 767–784. doi:10.1007/s00158-010-0602-y.DOI
  50. [51]Wang, F., Lazarov, B.S., Sigmund, O., Jensen, J.S., 2014. Interpolation scheme for fictitious domain techniques and topology optimization of finite strain elastic problems. Computer Methods in Applied Mechanics and Engineering 276, 453–472. doi:10.1016/j.cma.2014.03.021.DOI
  51. [52]White, D.A., Arrighi, W.J., Kudo, J., Watts, S.E., 2019. Multiscale topology optimization using neural network surrogate models. Computer Methods in Applied Mechanics and Engineering 346, 1118–1135. doi:10.1016/j.cma.2018.09.007.DOI
  52. [53]Xia, L., Breitkopf, P., 2016. Recent advances on topology optimization of multiscale nonlinear structures. Archives of Computational Methods in Engineering 24, 227–249. doi:10.1007/s11831-016-9170-7.DOI
  53. [55]Yvonnet, J., Monteiro, E., He, Q.C., 2013. Computational homogenization method and reduced database model for hyperelastic heterogeneous structures. International Journal for Multiscale Computational Engineering 11, 201–225. doi:10.1615/IntJMultCompEng.2013005374.
  54. [56]Zhang, X.S., Chi, H., Paulino, G.H., 2020. Adaptive multi-material topology optimization with hyperelastic materials under large deformations: A virtual element approach. Computer Methods in Applied Mechanics and Engineering 370, 112976. doi:10.1016/j.cma.2020.112976.DOI
  55. [57]Zhou, M., Rozvany, G.I.N., 1991. The COC algorithm, Part II: Topological, geometrical and generalized shape optimization. Computer Methods in Applied Mechanics and Engineering 89, 309–336. doi:10.1016/0045-7825(91)90046-9.DOI

Paper details

vlnc:W_5m3zeuy5
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents