betaFeedback

WorksPhysics and Astronomy

Thermocapillary Convection in Superimposed Layers of Self-Rewetting Fluids: Analytical and Lattice Boltzmann Computational Study

Abstract

Self-rewetting fluids (SRFs), such as aqueous solutions of long-chain alcohols, exhibit anomalous quadratic dependence of surface tension on temperature having a minimum and with a positive gradient. When compared to the normal fluids (NFs), the SRFs can be associated with significantly modified interfacial dynamics, which have recently been exploited to enhance flow and thermal transport in various applications (e.g., microgravity and microscale transport systems). In this work, first, we develop a new analytical solution of thermocapillary convection in superimposed two SRF layers confined within a microchannel that is sinusoidally heated on one side and maintained at a uniform temperature on the other side under the creeping flow regime. Then, a robust central moment lattice Boltzmann method using the Allen-Cahn equation for interface tracking, two-fluid motion, and the energy transport for numerical simulations of SRFs is constructed. The analytical and computational techniques are generally shown to be in good quantitative agreement with one another. Moreover, the effect of the various characteristic parameters on the magnitude and the distribution thermocapillary-driven motion is studied. The thermocapillary flow patterns in SRFs are shown to be strikingly different when compared to the NFs: For otherwise the same conditions, the SRFs result in eight periodic counterrotating thermocapillary convection rolls, while the NFs exhibit only four such vortices. Moreover, the direction of the circulating fluid motion in such vortical structures for the SRFs is found to be towards the hotter zones on the interfaces, which is opposite to that in NFs. By tuning the sensitivity coefficients of the surface tension on temperature, it is shown that the magnitude as well the overall thermocapillary flow patterns can be significantly manipulated.

Introduction

Surface tension forces arising at the interface between fluids play prominent role in many multiphase and thermal transport processes [1]. Their variations can be caused by changes in the local interfacial temperature or with the addition of surface active materials (i.e., surfactants). The surface tension gradients result in the so-called Marangoni stresses [2], which, via the viscous effects of the fluids, induce their convective motions in the vicinity of the interfaces [3]. If they are set up due to local temperature variations, they are referred to as the thermocapillary convection. Since the seminal study by Young et al. [4], who demonstrated the ability of a bubble to migrate towards hot regions in the absence of gravity due to Marangoni stresses, thermocapillary effects have been exploited in controlling the motion of dispersed phases (bubbles or drops) in fluids, especially in microgravity applications [5] (see e.g., [6, 7] for related numerical investigations). On the other hand, in micro-electro-mechanical-systems, as the scales of the devices are reduced, the interfacial forces dominate, and the thermocapillary convection can be utilized to manipulate the motion of fluid streams and thermal transport phenomena in microchannels (see e.g., [8, 9]). In particular, an analysis of convective currents set up via thermally induced surface tension gradients in superimposed fluids which are bounded by differentially heated walls represents study for a prototypical configuration in this regard [10] (see e.g., [11] for a review of thermocapillary convection in layers of fluid films).

It is generally known that common fluids, such as water, air, and various oils have the property of surface tension that decreases somewhat linearly with increasing temperatures. On the other hand, certain fluids, such as aqueous solutions of long-chain (i.e., “fatty”) alcohols, some liquid metallic alloys, and nematic liquid crystals exhibit anomalous nonlinear parabolic dependence of surface tension on temperature with a range involving its positive gradient. In particular, Vochten and Petre [12] performed measurements in nonazeotropic, high-carbon alcohol solutions (such as n-butanol), and demonstrated that they have a property that beyond a certain threshold temperature, the surface tension will increase with further increase in temperature; the surface tension becomes a minimum at this threshold temperature, whose value increases for alcohols with longer carbon chains; and for a particular alcohol, the minimum surface tension decreases monotonically with its concentration. These findings were corroborated by follow on experimental studies reported in [13, 14, 15]. In essence, for a range of temperature, such fluids have a positive gradient of surface tension with temperature and they have been named as “self-rewetting” fluids (SRFs) by Abe et al. [16] due to a significantly altered thermocapillary convection promoting a desired wetting effect when compared to the common or normal fluids (NFs). In particular, the Marangoni stresses induce the motion of fluids in the vicinity of the interfaces towards higher temperatures in SRFs (where the fluids are associated with higher surface tension), which is opposite to that observed in NFs. See the schematic in Figure 1, which illustrates the differences in the behavior of both these types of fluids.

Surface tension variation and thermocapillary motions for normal and self-rewetting fluids

Figure 1. (a) Surface tension variation with respect to temperature for a normal fluid (NF) and for a self-rewetting fluid (SRF). The parabolic functional dependence of the surface tension for the example SRF (butanol aqueous solution) with temperature is based on a curve fit generated from the data given in [17]. (b) Differences in the thermocapillary motions in the vicinity of interfaces for NFs and SRFs.

As such, the self-rewetting fluids have the ability to generate vigorous inflow of liquids near high temperature regions, e.g., towards nucleating sites during boiling thereby preventing the onset of dry patches at such hot spots. These and other peculiar features arising from the thermocapillarity associated with SRFs involving dispersed phases have provided strong impetus for their investigations as novel classes of fluids to enhance transport in various thermal management applications during the last two decades. They have been proposed as working fluids for various technological applications in both terrestrial and microgravity environments [16, 18]. The use of SRFs has been shown to improve heat transfer efficiency in heat pipes [17, 19, 20, 21, 22, 23], flow boiling [24] and evaporation [25] in microchannels, pool boiling processes [26, 27, 28, 29], and two-phase heat transfer devices using self-rewetting gold nanofluids [30]. Moreover, the peculiar characteristics of the migration of bubbles in SRFs have been experimentally studied in [31, 32].

As noted in a recent review involving the use of SRFs [33], only limited analytical and numerical studies involving the SRFs, which can provide fundamental insights into the details of the transport phenomena, have been performed. Analytical investigations into the behavior of thin films of SRFs were presented in [34, 35, 36] and a similarity solution of the motion of SRFs in an unbounded domain was discussed in [37]. Theoretical analysis of the migration of a bubble in a SRF was presented in [38] and that of an elongated slug in [39]. More recently, numerical studies on the migration of a bubble in SRFs were performed in [40, 41, 42].

Among the various computational methods, the lattice Boltzmann (LB) method, a technique inspired from kinetic theory [43, 44, 45], has shown promising capabilities for simulating multiphase flows (see e.g., [46, 47, 48, 49, 50]). Its popularity stem from its ability to readily represent the relevant physics at the mesoscopic scales using kinetic models, its natural parallelization features, and its efficient and ease of implementation using the collide-and-stream steps. The LB methods have also been applied to simulate thermocapillary flow problems (see e.g., [41, 42, 51]). More recently, using robust collision models [52], the LB method has been extended to simulate multiphase flows at high density ratios and including Marangoni stresses [50], which will serve as a basis for further extension for its application to an interesting configuration involving thermocapillary flows in SRFs as discussed below.

One of the important applications of exploiting thermocapillarity is in manipulating the motion of continuous streams of fluids confined within microchannels. In this regard, in the case of two superimposed normal fluids (NFs), Pendse and Esmaeeli [10] presented a theoretical analysis for thermocapillary convection driven by periodic heating from the bounding walls, representing, for example, micropatterned walls. Under the assumption of creeping flow limit and in the absence of gravity, and taking the surface tension to decrease linearly with temperature, they developed an analytical solution for the thermocapillary-driven flow field demonstrating the existence of a pair of periodic convection cells in each fluid.

In this work, we generalize the above mentioned configuration reported in Ref. [10] and develop a new analytical solution for thermocapillary convection in two superimposed layers of self-rewetting fluids (SRFs) confined within a microchannel and subjected to periodic heating on the lateral walls. Such an investigation yields a new pathway to enhance mixing and transport by tuning thermocapillary effects in SRFs when compared to NFs in differentially heated microchannels. We consider a nonlinear (parabolic) dependence of the surface tension on temperature representing the general class of SRFs, and derive analytical solutions for the thermocapillary convection currents under the assumptions of small capillary and Marangoni numbers and in the creeping flow limit, which are representative of situations in microchannels. The flow field will be represented in terms of the streamfunctions for each of the SRFs, which are parameterized by the thickness ratio of the fluids and the ratios of the thermal conductivities as well as that of viscosities, and the coefficients of the functional dependence of surface tension on temperature. As a second objective, we will also present a numerical simulation approach for such a configuration based on a robust central moment LB scheme using a phase field model based on the conservative Allen-Cahn equation. It involves computing the evolution of three distribution functions, one each for the flow field, temperature field and the capturing of the interfaces via a order parameter, and with an attendant surface tension equation of state for SRFs. It will involve an improved and simpler implementation strategy when compared to our recent work in this regard [50]. As a third objective, we will compare the predictions based on our analytical solution against the results from our LB computational approach, thereby demonstrating qualitative as well as quantitative consistency between the two approaches, and thus establishing the validity of our analysis. Finally, we aim to present a study of the effect of the various characteristic parameters (such as ratios of the fluid thicknesses and the ratios of the fluid properties) on the vortical convection patterns in SRFs, in terms of both the number of convection cells and their sense of direction of motion and comparing and contrasting them with that of NFs, and on the magnitude of the thermal convection velocities. These contributions not only serve in elucidating the physics of a thermally induced capillary phenomenon in SRFs in a fundamental configuration, but the analytical solutions developed herein could also serve as a benchmark for any new computational techniques for simulating thermocapillary flows in SRFs in future. Moreover, the numerical algorithm based on the LB method presented in this work, while applied here in what follows for SRF layers in a microchannel, can also be readily extended for other situations including those involving tracking the motion of any dispersed phase in SRFs.

This paper is organized as follows. In the next section (§ 2), we will discuss the problem setup of the thermocapillary flow in superimposed layers of SRFs in a microchannel and the attendant governing equations for incompressible two-fluid motion, energy transport and the interfacial equation of state. A derivation of the new analytical solution of thermocapillary motion in superimposed layers of SRFs is presented in § 3. The computational model equations for the LB schemes for multiphase flows using a phase field model are given in 4. The discretized central moment LB algorithms for simulating multiphase flows of SRFs are summarized in § 5, with § 5.1, § 5.2 and § 5.3 discussing the LB schemes for fluid motion, the interfacial dynamics, and the energy transport, respectively. § 6 presents a numerical validation of the computational approach against an existing benchmark problem for thermocapillary flow in a NF. The results and discussion of the effect of various characteristic parameters on the thermocapillary convection in superimposed layers of SRFs in a microchannel are presented in § 7, where our new analytical solutions are also compared against the results obtained using our central moment LB schemes in this regard; moreover, the utility of the computational method in simulating such flows with interfacial deformations at higher capillary numbers is also demonstrated. The main findings and contributions of this work are summarized in § 8. Additional supporting details are given in the appendices.

Problem setup, Governing equations, and Interface equation of state

Problem setup

A schematic of the geometric configuration of two superimposed SRF layers confined within a microchannel is shown in Figure 2. The channel is of horizontal length ll and whose walls are separated by a lateral distance (a+b)(a+b). A sinusoidal temperature variation is imposed on the hot bottom wall side, while cold bottom wall side is maintained at a uniform temperature. The channel is filled with two immiscible SRFs, fluid ‘a’ on the top side and fluid ‘b’ on the bottom side with thicknesses aa and bb, respectively; the viscosities and thermal conductivities of the top fluid are denoted by μa\mu_a and kak_a, respectively, while those for the bottom fluid are represented by μb\mu_b and kbk_b, respectively. The origin of the coordinate system axes is located on their interface at the midsection in the horizontal direction as shown.

Image not extracted

Figure 2. Schematic of the geometric setup for two superimposed self-rewetting fluid (SRF) layers within a horizontal microchannel with a periodic heating at the bottom wall.

The upper wall is set with a constant reference cold temperature TcT_c, while the lower wall is prescribed with a spatially varying hot temperature based on a sinusoidal profile involving a reference temperature ThT_h and a peak amplitude ΔT\Delta T for the variation. Thus, the corresponding boundary conditions at these two sides can be written as

Ta(x,a)=Tc,(1)T^{a}(x,a)=T_c, \tag*{(1)}

and

Tb(x,−b)=Th+ΔTcos⁡(ωx),(2)T^{b}(x,-b)=T_h+\Delta T\cos(\omega x), \tag*{(2)}

where ω=2π/l\omega=2\pi/l is the wavenumber based on the channel length ll and ΔT>0\Delta T>0, and assume Tb(x,−b)≥Ta(x,a)T^{b}(x,-b)\geq T^{a}(x,a) for any xx. Here, and in what follows, we use a superscript notation with ‘a’ or ‘b’ to label any quantity associated with a top or bottom fluid, respectively. The imposed spatial variations in the temperature results in a heat diffusion into the bulk regions of the fluids with sets up a nonuniform distribution of the temperature along the interface. The surface tension σ=σ(T)\sigma=\sigma(T) at the interface between the SRFs also then varies locally, which, via the viscous actions in the bulk fluids, induce a thermocapillary convection. The resulting flow field is then subject to the no-slip condition for the velocity components at the bounding walls.

Bulk fluid motion and energy transport

The thermocapillary convection in the SRFs obey the equations of mass and momentum (i.e., Navier–Stokes equations (NSE)) along with the equation of the energy transport. Each of the two SRFs obey such conservation equations. They can be respectively written as follows:

∇⋅u=0,(3)\nabla\cdot u=0, \tag*{(3)}
ρ(∂u∂t+∇⋅(uu))=−∇p+∇⋅[μ(∇u+∇ut)],(4)\rho\left(\frac{\partial u}{\partial t}+\nabla\cdot(uu)\right)=-\nabla p+\nabla\cdot\left[\mu\left(\nabla u+\nabla u^{\mathsf{t}}\right)\right], \tag*{(4)}
∂T∂t+u⋅∇T=∇⋅(α∇T),(5)\frac{\partial T}{\partial t}+\mathbf{u}\cdot\nabla T=\nabla\cdot\left(\alpha\nabla T\right), \tag*{(5)}

where ρ\rho, μ\mu and α\alpha are the fluid density, dynamic viscosity, and thermal diffusivity of the fluid, respectively, with α=k/(ρcp)\alpha=k/(\rho c_p) based on the thermal conductivity kk and specific heat cpc_p. In the above, u\mathbf{u}, pp, and TT denote the velocity, pressure, and temperature fields of the fluids, respectively, and the superscript symbol †\dagger represents taking transpose of the dyadic velocity gradient ∇u\nabla\mathbf{u}.

Interface equation of state for surface tension

At the interface, we need to impose an equation for the surface tension relating it to the variations in the local temperature. For the SRF, we consider the following nonlinear (parabolic) dependence of surface tension on temperature:

σ(T)=σ0+σT(T−Tref)+σTT(T−Tref)2,(6)\sigma(T)=\sigma_0+\sigma_T(T-T_{ref})+\sigma_{TT}(T-T_{ref})^2, \tag*{(6)}

where σ0\sigma_0 denotes the value of the surface tension at a reference temperature TrefT_{ref}, σT=dσdT∣Tref\sigma_T=\left.\frac{d\sigma}{dT}\right|_{T_{ref}} and σTT=12d2σdT2∣Tref\sigma_{TT}=\left.\frac{1}{2}\frac{d^2\sigma}{dT^2}\right|_{T_{ref}} are the coefficients of the surface equation of state, expressing the sensitivity of the surface tension temperature. It should noted for a SRF, σTT≠0\sigma_{TT}\ne0, while for a NF, σTT=0\sigma_{TT}=0 where only σT\sigma_T is non-zero. In general, σ0\sigma_0, TrefT_{ref}, σT\sigma_T, and σTT\sigma_{TT} are properties, which are unique to a chosen SRF. In addition, at the interface, a relation between the Marangoni stress due to the nonuniform tangential surface tension gradient and the viscous fluid stress, along with the interfacial continuity conditions for the flow and thermal fields need to be imposed. These will be accounted for in what follows.

When the above governing equations are nondimensionalized using a reference velocity scale UU and a length scale bb corresponding to the thickness of the bottom SRF layer, we obtain the following dimensionless groups: Reynolds number Re, Marangoni number Ma, and the capillary number Ca, which can be defined as

Re⁡=Ubνb,Ma⁡=Ubαb=Re⁡Pr⁡,andCa⁡=Uμbσ0.(7)\operatorname{Re}=\frac{Ub}{\nu_b},\qquad\operatorname{Ma}=\frac{Ub}{\alpha_b}=\operatorname{Re}\operatorname{Pr},\qquad\text{and}\qquad\operatorname{Ca}=\frac{U\mu_b}{\sigma_0}. \tag*{(7)}

respectively. Here, ν=μ/ρ\nu=\mu/\rho is the kinematic viscosity, and Pr is the Prandtl number (Pr = ν/α\nu/\alpha). In addition, the thermocapillary convection in SRFs is governed by the following ratios of the bulk material properties

ρ~=ρaρb,μ~=μaμb,k~=kakb,andc~p=cpacpb,(8)\tilde{\rho}=\frac{\rho_a}{\rho_b},\qquad\tilde{\mu}=\frac{\mu_a}{\mu_b},\qquad\tilde{k}=\frac{k_a}{k_b},\qquad\text{and}\qquad\tilde{c}_p=\frac{c_{p_a}}{c_{p_b}}, \tag*{(8)}

and the dimensionless parameters for the interface equation of state for the surface tension

M1=σT(ΔTσ0),M2=σTT(ΔT2σ0).(9)M_1=\sigma_T\left(\frac{\Delta T}{\sigma_0}\right),\qquad M_2=\sigma_{TT}\left(\frac{\Delta T^2}{\sigma_0}\right). \tag*{(9)}

As in the above, taking reference values for the properties using those for the bottom fluid, it may be noted that by balancing the scale for the viscous shear stress μbU/b\mu_bU/b with that of the Marangoni stress due to the surface tension gradient ∣dσ/dT∣(ΔT/l)\lvert d\sigma/dT\rvert(\Delta T/l), we can estimate the scale for the reference velocity UU of thermocapillary convection used in the above via U∼∣dσ/dT∣(ΔT/μb)(b/l)U \sim\lvert d\sigma/dT\rvert(\Delta T/\mu_b)(b/l), where ΔT\Delta T is set to be equal to the maximum amplitude in the spatial variation in the imposed temperature at the bottom wall T0T_0. Here, ∣dσ/dT∣\lvert d\sigma/dT\rvert can be obtained from Eq. (6) in terms of the surface tension-temperature relation properties of the SRF.

Analytical Solution for Thermocapillary Convection in Superimposed SRF Layers in a Microchannel

We will now derive a new analytical solution for thermocapillary convection in superimposed SRF layers in the Stokes flow regime relevant to microchannels. In this regard, we consider the fluids to be incompressible, immiscible, and Newtonian, and assume that the Reynolds and Marangoni numbers are much less than one (i.e., Re≪1\mathrm{Re} \ll1 and Ma≪1\mathrm{Ma} \ll1), the convective transport of momentum and energy can be neglected. Also, the capillary number is also taken to be much less than one (i.e., Ca≪1\mathrm{Ca} \ll1), so that we can consider the interface to be nearly flat, and the established thermocapillary convection patterns are steady. All these typical assumptions are consistent with an earlier theoretical analysis involving the NFs reported previously [10]. Based on these considerations, all the conservation equations given above simplify considerably. The mass conservation read as

∇⋅u=0,(10)\nabla\cdot\boldsymbol{u} = 0, \tag*{(10)}

while the momentum equation now reduces to

−∇p+μ∇2u=0,(11)-\nabla p + \mu\nabla^{2}\boldsymbol{u} = 0, \tag*{(11)}

and the balance of thermal energy equation is given as

∇2T=0,(12)\nabla^{2}T = 0, \tag*{(12)}

where ∇2=∂2∂x2+∂2∂y2\nabla^{2} = \frac{\partial^{2}}{\partial x^{2}} + \frac{\partial^{2}}{\partial y^{2}}. These bulk transport equations need to be solved in conjunction with the interface continuity conditions for the flow and temperature fields and the Marangoni stress condition at the interface between the SRFs (see below for details).

Temperature field

The thermal energy equation Eq. (12), which satisfies the wall boundary conditions given in the previous section, can be solved readily and is independent of the nature of the fluid; the specific details involved in the solution procedure are given in Appendix A of this paper. The solution for the temperature field is summarized here as follows: In the upper fluid aa,

Ta(x,y)=(Tc−Th)y+Tck~b+Tha(a+bk~)+ΔTf(a~,b~,k~)sinh⁡(a~−ωy)cos⁡(ωx),(13)T^{a}(x,y) = \frac{(T_c-T_h)y + T_c\tilde{k}b + T_h a}{(a+b\tilde{k})} + \Delta T f(\tilde{a},\tilde{b},\tilde{k})\sinh(\tilde{a}-\omega y)\cos(\omega x), \tag*{(13)}

and in the lower fluid bb,

References

  1. [1]Pierre-Gilles De Gennes, Françoise Brochard-Wyart, David Quéré, et al. Capillarity and wetting phenomena: drops, bubbles, pearls, waves, volume 315. Springer, 2004.DOI
  2. [2]LE Scriven and CV Sternling. The Marangoni effects. Nature, 187(4733):186–188, 1960.DOI
  3. [3]Ronald F Probstein. Physicochemical hydrodynamics: an introduction. John Wiley & Sons, 2005.
  4. [4]NO Young, JS Goldstein, and Mi J Block. The motion of bubbles in a vertical temperature gradient. Journal of Fluid Mechanics, 6(3):350–356, 1959.DOI
  5. [5]RS Subramanian, R Balasubramaniam, and N Clark. Motion of bubbles and drops in reduced gravity. Applied Mechanics Reviews, 55(3):B56, 2002.
  6. [6]Samuel WJ Welch. Transient thermocapillary migration of deformable bubbles. Journal of colloid and interface science, 208(2):500–508, 1998.pubmed.ncbi.nlm.nih.gov/9845694
  7. [7]Chen Ma and Dieter Bothe. Direct numerical simulation of thermocapillary flow based on the volume of fluid method. International Journal of Multiphase Flow, 37(9):1045–1058, 2011.DOI
  8. [8]Anton A Darhuber and Sandra M Troian. Principles of microfluidic actuation by modulation of surface stresses. Annual Review of Fluid Mechanics, 37:425–455, 2005.DOI
  9. [9]Alireza Karbalaei, Ranganathan Kumar, and Hyoung Jin Cho. Thermocapillarity in microfluidics—a review. Micromachines, 7(1):13, 2016.DOI
  10. [10]Bhushan Pendse and Asghar Esmaeeli. An analytical solution for thermocapillary-driven convection of superimposed fluids at zero reynolds and marangoni numbers. International Journal of Thermal Sciences, 49(7):1147–1155, 2010.DOI
  11. [11]Tatiana Gambaryan-Roisman. Modulation of Marangoni convection in liquid films. Advances in colloid and interface science, 222:319–331, 2015.
  12. [12]R. Vochten and Georges Petre. Study of the heat of reversible adsorption at the air-solution interface. ii. experimental determination of the heat of reversible adsorption of some alcohols. Journal of Colloid and Interface Science, 42(2):320–327, 1973.
  13. [13]Georges Petre and Maherzia Aza Azouni. Experimental evidence for the minimum of surface tension with temperature at aqueous alcohol solution/air interfaces. Journal of Colloid and Interface Science, 98(1):261–263, 1984.DOI
  14. [14]MC Limbourg-Fontaine, Georges Pétré, and Jean Claude Legros. Thermocapillary movements under microgravity at a minimum of surface tension. Naturwissenschaften, 73(7):360–362, 1986.
  15. [15]D Villers and JK Platten. Temperature dependence of the interfacial tension between water and long-chain alcohols. The Journal of Physical Chemistry, 92(14):4023–4024, 1988.DOI
  16. [16]Yoshiyuki Abe, Akira Iwasaki, and Kotaro Tanaka. Microgravity experiments on phase change of self-rewetting fluids. Annals of the New York Academy of Sciences, 1027(1):269–285, 2004.pubmed.ncbi.nlm.nih.gov/15644361
  17. [17]Raffaele Savino, Anselmo Cecere, and Roberto Di Paola. Surface tension-driven flow in wickless heat pipes with self-rewetting fluids. International Journal of Heat and Fluid Flow, 30(2):380–388, 2009.DOI
  18. [18]Yoshiyuki Abe. Terrestrial and microgravity applications of self-rewetting fluids. Microgravity Science and Technology, 19(3):11–12, 2007.DOI
  19. [19]Raffaele Savino, Anselmo Cecere, Stefan Van Vaerenbergh, Yoshiyuki Abe, G Pizzirusso, W Tzevelecos, Mohamed Mojahed, and Quentin Galand. Some experimental progresses in the study of self-rewetting fluids for the SELENE experiment to be carried in the thermal platform 1 hardware. Acta Astronautica, 89:179–188, 2013.
  20. [20]Yanxin Hu, Tengqing Liu, Xuanyou Li, and Shuangfeng Wang. Heat transfer enhancement of micro oscillating heat pipes with self-rewetting fluid. International Journal of Heat and Mass Transfer, 70:496–503, 2014.DOI
  21. [21]Shen-Chun Wu, Tien-Ju Lee, Wei-Jih Lin, and Yau-Ming Chen. Study of self-rewetting fluid applied to loop heat pipe with ptfe wick. Applied Thermal Engineering, 119:622–628, 2017.DOI
  22. [22]Anselmo Cecere, Davide De Cristofaro, Raffaele Savino, Vincent Ayel, Thibaud Sole-Agostinelli, Marco Marengo, Cyril Romestant, and Yves Bertin. Experimental analysis of a flat plate pulsating heat pipe with self-rewetting fluids during a parabolic flight campaign. Acta Astronautica, 147:454–461, 2018.DOI
  23. [23]Minghan Zhu, Jin Huang, Mengjie Song, and Yanxin Hu. Thermal performance of a thin flat heat pipe with grooved porous structure. Applied Thermal Engineering, 173:115215, 2020.DOI
  24. [24]Anze Sitar and Iztok Golobic. Heat transfer enhancement of self-rewetting aqueous n-butanol solutions boiling in microchannels. International Journal of Heat and Mass Transfer, 81:198–206, 2015.DOI
  25. [25]K Sefiane, X Yu, Gail Duursma, and J Xu. On heat and mass transfer using evaporating self-rewetting mixtures in microchannels. Applied Thermal Engineering, 179:115662, 2020.DOI
  26. [26]Yanxin Hu, Suling Zhang, Xuanyou Li, and Shuangfeng Wang. Heat transfer enhancement of subcooled pool boiling with self-rewetting fluid. International Journal of Heat and Mass Transfer, 83:64–68, 2015.DOI
  27. [27]Yanxin Hu, Sixu Chen, Jin Huang, and Mengjie Song. Marangoni effect on pool boiling heat transfer enhancement of self-rewetting fluid. International Journal of Heat and Mass Transfer, 127:1263–1270, 2018.DOI
  28. [28]Yanxin Hu, Hai Wang, Mengjie Song, and Jin Huang. Marangoni effect on microbubbles emission boiling generation during pool boiling of self-rewetting fluid. International Journal of Heat and Mass Transfer, 134:10–16, 2019.DOI
  29. [29]Yong Il Kim, Boo-Hyoung Bang, Keunhee Jang, Seongpil An, Alexander L Yarin, and Sam S Yoon. Pool boiling enhancement via nanotexturing and self-propelled swing motion for bubble shedding. International Communications in Heat and Mass Transfer, 133:105934, 2022.DOI
  30. [30]Ibrahim Zaaroura, Souad Harmand, Julien Carlier, Malika Toubal, Aurélie Fasquelle, and Bertrand Nongaillard. Thermal performance of self-rewetting gold nanofluids: Application to two-phase heat transfer devices. International Journal of Heat and Mass Transfer, 174:121322, 2021.DOI
  31. [31]Martin ER Shanahan and Khellil Sefiane. Recalcitrant bubbles. Scientific Reports, 4(1):1–9, 2014.DOI
  32. [32]Dimitrios Mamalis, Vasileios Koutsos, and Khellil Sefiane. Bubble rise in a non-isothermal self-rewetting fluid and the role of thermocapillarity. International Journal of Thermal Sciences, 117:146–162, 2017.DOI
  33. [33]Yanxin Hu, Kaixin Huang, and Jin Huang. A review of boiling heat transfer and heat pipes behaviour with self-rewetting fluids. International Journal of Heat and Mass Transfer, 121:107–118, 2018.DOI
  34. [34]Alexander Oron and Philip Rosenau. On a nonlinear thermocapillary effect in thin liquid layers. Journal of Fluid Mechanics, 273:361–374, 1994.DOI
  35. [35]William Batson, Yehuda Agnon, and Alex Oron. Thermocapillary modulation of self-rewetting films. Journal of Fluid Mechanics, 819:562–591, 2017.DOI
  36. [36]Z Yu. Thermocapillary instability of self-rewetting films on vertical fibers. Physics of Fluids, 30(8):082104, 2018.DOI
  37. [37]SG Slavtchev and SP Miladinova. Thermocapillary flow in a liquid layer at minimum in surface tension. Acta Mechanica, 127(1):209–224, 1998.DOI
  38. [38]Manoj Kumar Tripathi, KC Sahu, G Karapetsas, K Sefiane, and OK Matar. Non-isothermal bubble rise: non-monotonic dependence of surface tension on temperature. Journal of Fluid Mechanics, 763:82–108, 2015.DOI
  39. [39]BR Duffy, SK Wilson, JJA Conn, and K Sefiane. Unsteady motion of a long bubble or droplet in a self-rewetting system. Physical Review Fluids, 3(12):123603, 2018.DOI
  40. [40]Mounika Balla, Manoj Kumar Tripathi, Kirti Chandra Sahu, George Karapetsas, and Omar K Matar. Non-isothermal bubble rise dynamics in a self-rewetting fluid: three-dimensional effects. Journal of Fluid Mechanics, 858:689–713, 2019.DOI
  41. [41]Mohammad Majidi, Reza Haghani-Hassan-Abadi, and Mohammad-Hassan Rahimian. Single recalcitrant bubble simulation using a hybrid lattice Boltzmann finite difference model. International Journal of Multiphase Flow, 127:103289, 2020.DOI
  42. [42]TR Mitchell, M Majidi, MH Rahimian, and CR Leonardi. Computational modeling of three-dimensional thermocapillary flow of recalcitrant bubbles using a coupled lattice Boltzmann-finite difference method. Physics of Fluids, 33(3):032108, 2021.DOI
  43. [43]Roberto Benzi, Sauro Succi, and Massimo Vergassola. The lattice Boltzmann equation: theory and applications. Physics Reports, 222(3):145–197, 1992.DOI
  44. [44]Dazhi Yu, Renwei Mei, Li-Shi Luo, and Wei Shyy. Viscous flow computations with the method of lattice Boltzmann equation. Progress in Aerospace sciences, 39(5):329–367, 2003.DOI
  45. [45]Pierre Lallemand, Li-shi Luo, Manfred Krafczyk, and Wen-An Yong. The lattice Boltzmann method for nearly incompressible flows. Journal of Computational Physics, 431:109713, 2021.DOI
  46. [46]Xiaoyi He, Shiyi Chen, and Raoyang Zhang. A lattice Boltzmann scheme for incompressible multiphase flow and its application in simulation of Rayleigh–Taylor instability. Journal of computational physics, 152(2):642–663, 1999.
  47. [47]Xiaoyi He and Gary D Doolen. Thermodynamic foundations of kinetic theory and lattice Boltzmann models for multiphase flows. Journal of Statistical Physics, 107(1):309–328, 2002.DOI
  48. [48]Taehun Lee and Ching-Long Lin. A stable discretization of the lattice Boltzmann equation for simulation of incompressible two-phase flows at high density ratio. Journal of Computational Physics, 206(1):16–47, 2005.DOI
  49. [49]Kannan N Premnath and John Abraham. Three-dimensional multi-relaxation time (mrt) lattice-Boltzmann models for multiphase flow. Journal of Computational Physics, 224(2):539–559, 2007.DOI
  50. [50]Farzaneh Hajabdollahi, Kannan N Premnath, and Samuel WJ Welch. Central moment lattice Boltzmann method using a pressure-based formulation for multiphase flows at high density ratios and including effects of surface tension and Marangoni stresses. Journal of Computational Physics, 425:109893, 2021.arxiv.org/abs/1909.04166
  51. [51]Haihu Liu, Yonghao Zhang, and Albert J Valocchi. Modeling and simulation of thermocapillary flows using lattice Boltzmann method. Journal of Computational Physics, 231(12):4433–4453, 2012.DOI
  52. [52]Martin Geier, Andreas Greiner, and Jan G Korvink. Cascaded digital lattice Boltzmann automata for high reynolds number flow. Physical Review E, 73(6):066705, 2006.pubmed.ncbi.nlm.nih.gov/16907021
  53. [53]William E Langlois and Michel O Deville. Slow viscous flow, volume 173436. Springer, 2014.
  54. [54]Pao-Hsiung Chiu and Yan-Ting Lin. A conservative phase field method for solving incompressible two-phase flows. Journal of Computational Physics, 230(1):185–204, 2011.DOI
  55. [55]Ying Sun and Christoph Beckermann. Sharp interface tracking using the phase-field equation. Journal of Computational Physics, 220(2):626–653, 2007.DOI
  56. [56]R. Folch, J. Casademunt, A. Hernández-Machado, and L. Ramirez-Piscina. Phase-field model for hele-shaw flows with arbitrary viscosity contrast. i. theoretical approach. Physical Review E, 60(2):1724, 1999.DOI
  57. [57]Jeremiah U Brackbill, Douglas B Kothe, and Charles Zemach. A continuum method for modeling surface tension. Journal of computational physics, 100(2):335–354, 1992.DOI
  58. [58]Anand Kumar. Isotropic finite-differences. Journal of Computational Physics, 201(1):109–118, 2004.DOI
  59. [59]Hang Ding, Peter DM Spelt, and Chang Shu. Diffuse interface model for incompressible two-phase flows with large density ratios. Journal of Computational Physics, 226(2):2078–2095, 2007.DOI
  60. [60]Kannan N Premnath and Sanjoy Banerjee. Incorporating forcing terms in cascaded lattice Boltzmann approach by method of central moments. Physical Review E, 80(3):036702, 2009.pubmed.ncbi.nlm.nih.gov/19905241
  61. [61]Eman Yahia and Kannan N Premnath. Central moment lattice Boltzmann method on a rectangular lattice. Physics of Fluids, 33(5):057110, 2021.DOI
  62. [62]Eman Yahia, William Schupbach, and Kannan N Premnath. Three-dimensional central moment lattice Boltzmann method on a cuboid lattice for anisotropic and inhomogeneous flows. Fluids, 6(9):326, 2021.arxiv.org/abs/2107.14774
  63. [63]Martin Geier, Martin Schönherr, Andrea Pasquali, and Manfred Krafczyk. The cumulant lattice Boltzmann equation in three dimensions: Theory and validation. Computers & Mathematics with Applications, 70(4):507–547, 2015.DOI
  64. [64]Timm Krüger, Halim Kusumaatmaja, Alexandr Kuzmin, Orest Shardt, Goncalo Silva, and Erlend Magnus Viggen. The lattice Boltzmann method. Springer International Publishing, 10(978-3):4–15, 2017.
  65. [65]Zhenlin Guo and Ping Lin. A thermodynamically consistent phase-field model for two-phase flows with thermocapillary effects. Journal of Fluid Mechanics, 766:226–271, 2015.DOI
  66. [66]Lin Zheng, Song Zheng, and Qinglan Zhai. Continuous surface force based lattice Boltzmann equation method for simulating thermocapillary flow. Physics Letters A, 380(4):596–603, 2016.arxiv.org/abs/1412.6238
  67. [67]Seyed Amin Nabavizadeh, Mohsen Eshraghi, Sergio D Felicelli, Surendra N Tewari, and Richard N Grugel. Effect of bubble-induced Marangoni convection on dendritic solidification. International Journal of Multiphase Flow, 116:137–152, 2019.DOI

Paper details

vlnc:W_5qctjh8z
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 7

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents