betaFeedback

WorksPhysics and Astronomy

A time-domain approach for motion-explicit evaluation of loads on floating structures in fully nonlinear waves

Abstract

This paper presents a novel method for evaluating second-order consistent hydrodynamic loads, which employs nonlinear wave and body kinematics. The pseudo-spectral formulation of nonlinear potential flow wave solvers is exploited, permitting the application of transfer functions on the nonlinear incident wave field. A closed-form expression is accordingly derived for the potential force component, which constitutes a generalisation of the Pinkster approximation to fully nonlinear waves. Moreover, the quadratic force component is reformulated to account for the total nonlinear body motion and velocity rather than their first-order counterparts. Hence, the traditional assumption that first-order body motions are significantly larger than the second-order components, which is violated in the case of moored floating structures, is circumvented. To this end, the radiation potential is treated in the time domain and is distinguished from the incident and scattering wave contributions, which are considered through wavenumber-domain transfer functions. An important advantage of the proposed approach is that it is established on the output of radiation-diffraction analysis in the frequency domain, and therefore is highly practical and efficient. Finally, the derived force model is coupled with a time-domain motion solver, which permits the consideration of the instantaneous body motion and velocity in the force calculation. The solver is employed to investigate the motions of a moored container ship, and the results demonstrate significant improvements over standard second-order radiation-diffraction theory.

Under consideration for publication in J. Fluid Mech.

Banner appropriate to article type will appear here in typeset article

Corresponding author: Henrik Bredmose, [email protected]

Key words:

Introduction

The offshore industry has shown increasing interest lately in using floating structures as an alternative to bottom-fixed structures, attempting to harness wind and wave energy resources in regions of large depth. The majority of these structures are anchored at the designed location using a mooring system that consists of several lines or risers. To prevent the occurrence of resonant motions in the horizontal plane, the natural frequency of the coupled system is designed not to coincide with the wave frequency range. However, second-order difference- or sum-frequency wave loads can potentially excite these resonant motions, significantly stressing the mooring system. Therefore, accurate modelling of these extreme responses and associated mooring loads is important for the safe and efficient design of moored floating structures.

Considering that the driving mechanisms of the problem are second-order, the use of linear theory is expected to fall short in modelling these responses. The common approach is to solve the first- and second-order radiation-diffraction problem using frequency-domain tools [27, 9, 26]. The results can then be delivered in a parametric form, referred to as the response amplitude operator (RAO) for the first-order loads and motions, and the quadratic transfer function (QTF) for the second-order quantities. The solution of the full second-order problem entails considerable computational burden, and thus, some approximations have been developed in the literature (de Hauteclocque et al. 2012). For instance, the Newman approximation [31] considers only the diagonal elements of the QTF matrix, corresponding to zero-difference-frequency pairs. Moreover, Pinkster (1980) approximated the second-order potential force by assuming that the so-called scattering second-order effects are secondary and approximating them based on the undisturbed incident wave field. The common feature of these approaches is the approximation of second-order loads using exclusively first-order quantities.

Upon solution of the radiation-diffraction problem and the evaluation of the hydrodynamic loads in the frequency domain, a second-order wavefield can be considered, and the first- and second-order responses can be obtained. The reconstruction of the linear responses in the time domain is straightforward by multiplying the RAO by the complex wave amplitudes and then applying an inverse fast Fourier transform (IFFT). Similarly, a double-summation scheme is employed for the time-domain reconstruction of second-order responses. This procedure constitutes the pure frequency domain approach and does not permit the inclusion of any additional nonlinearities in the mechanical system. Alternatively, the first- and second-order loads can be transformed into the time domain, and they can be used to solve the Cummins equation [10] at a post-processing stage. This approach is more refined, since it permits the consideration of nonlinear forces, and is referred to as the hybrid frequency-time domain approach. Finally, the overall problem can also be solved entirely in the time domain at an additional computational expense, through boundary element methods [2, 19] or field methods that discretise the fluid domain using finite differences [13] or finite elements (Wu & Eatock Taylor 2003).

Nevertheless, the importance of including nonlinear wave kinematics in the modelling of the low- or high-frequency responses has been highlighted in numerous recent studies. According to the European standard IEC 61400-3 [22] for floating wind turbines, considering the nonlinearity of the waves is necessary, especially for extreme load scenarios. Robertson [38] showed that the majority of the state-of-the-art coupled hydrodynamic tools for FOWT underestimated the ultimate and fatigue limit state loads, because of the low-frequency responses. It was later concluded by Robertson [37] that nonlinear wave kinematics and wave stretching might be significant for the accurate estimation of the low-frequency loads. In addition, Agarwal & Manuel [1] employed a second-order irregular wave model to investigate the longitudinal bending moment of a monopile structure in shallow water depths. It was shown that for the same sea state, the structural loads due to nonlinear waves followed a non-Gaussian distribution and were around 10% higher compared to the loads due to linear waves. It was concluded that considering linear waves might provide unconservative estimates of the long-term structural loads on offshore wind turbines. In Schløer et al. [39], the hydrodynamic loads on a fixed monopile were investigated using both linear and fully nonlinear wave kinematics for different depths. The inline force and tower bending moment were evaluated using the Rainey model (Rainey [35]), and a considerable underestimation of the load statistics was observed using linear waves. Moreover, the inclusion of wave nonlinearity resulted in an energy redistribution between free and bound wave components, which had a notable impact on the fatigue analysis.

Today, several approaches exist that deliver nonlinear wave kinematics at a quite reasonable computational cost. For regular waves, Stokes wave theory (Stokes [43]) and stream function theory (Rienecker & Fenton [36]) are widely employed approaches. For irregular waves, notable fully nonlinear wave models exist such as OceanWave3D (Engsig-Karup et al. [16]), HOS-NWT (Ducrozet et al. [14]) and HOS-ocean (Ducrozet et al. [15]), among others. In the case of slender structures, the scattered and radiated wavefields can be neglected, and the forces can be evaluated exclusively based on the incident waves. Under these conditions, semi-empirical force models can be employed ([30, 35]) to evaluate the wave-induced loads using fully nonlinear wave kinematics. Towards the inclusion of some scattering effects, the FNV model was proposed by Faltinsen et al. [18] for third-order regular waves, and was later extended to include fully nonlinear irregular wave kinematics by Kristiansen & Faltinsen [25]. For the case of non-slender structures, a novel force model was introduced by Bredmose et al. [6] that incorporates fully nonlinear wave kinematics in the calculation of second-order forces on fixed structures. In the same study, it was shown that, when using second-order waves, the proposed method is equivalent to the Pinkster approximation.

Moreover, another limitation arises from the expression of the second-order loads in an inertial reference frame. More precisely, the formulation is based on the assumption that second-order motions are significantly smaller than first-order motions. In practical applications such as the resonant low-frequency responses of moored floating bodies, this assumption can be largely violated. To address this issue, building on the earlier work of Shao & Faltinsen [40], Shao et al. [41] reformulated the second-order boundary value problem in a body-fixed reference frame. This formulation eliminates the need for Taylor series expansions to approximate the pressure on the instantaneous body surface relative to the mean body surface. Consequently, large second-order motions in the inertial reference frame do not affect the accuracy of the pressure integration. An alternative approach was introduced by Teng et al. [46], who addressed the problem using a non-inertial reference frame that oscillates horizontally with the slow-drift velocity of the body. By formulating the problem relative to this frame, the motion components could be consistently expanded in a power series, with second-order contributions remaining smaller than the first-order terms. This separation allowed the low-frequency horizontal motions to be decoupled from the wave-frequency motions, leading to a more accurate evaluation of the wave-induced loads. However, both these approaches require the solution of the boundary value problem in the time domain, which can be computationally demanding.

These two principal limitations in the modelling of the second-order wave-induced loads and responses of large-volume structures are the motivation for the present work, which extends the formulation of Bredmose et al. [6] to the case of moving bodies. The proposed approach is based on the output of a radiation-diffraction analysis in the frequency domain, and therefore is particularly efficient. In addition, the hydrodynamic loads are formulated employing both nonlinear wave and body kinematics, and regarding the latter, two advantages are presented. First, the distinction between first- and second-order body motions and assumptions about their respective order of magnitude is circumvented. As discussed in the introduction, this is particularly advantageous in the case of moored floating structures, where second-order motions become important due to resonant effects and therefore introduce inaccuracies in the pressure integration method. Moreover, the radiation potential is developed in the time domain, with respect to the nonlinear body kinematics, which partially decouples the resulting wavefield from the wave-induced motions. This feature permits the explicit consideration of other contributions, such as aerodynamic loads, in an integrated coupled load analysis, which is useful for application such as floating wind turbines. The new model is validated for the wave-induced surge and pitch motion of a moored container ship in unidirectional waves. The results are compared against classical second-order theory and experimental results.

The remainder of this paper is structured as follows. § 2 describes the fully nonlinear potential flow boundary value problem and the associated hydrodynamic loads. § 3 describes the solution of the problem in orders and the hydrodynamic loads up to second order. § 4 introduces the proposed novel approach for the evaluation of the hydrodynamic loads and the solution of the motion equations. § 5 outlines the experimental setup of the container ship vessel. Finally, § 6 includes a verification of the proposed method and a comparison of the results obtained against standard second-order theory and experiments, while § 7 summarises the conclusions of this work.

Fully nonlinear problem

Frames of reference

Two reference frames are considered for the definition of the rigid body motions, which are depicted in Figure 1 and more precisely,

Reference frame definition

Figure 1. Reference frame definition

  • A fixed inertial reference frame RO=(O,ex,ey,ez)\mathit{R}_{O} = (\mathbf{O},\mathbf{e}_{x},\mathbf{e}_{y},\mathbf{e}_{z}), the origin of which is located on the still waterline and the horizontal centre of gravity (COG) of the body at rest. The position vector is x=[x,y,z]\mathbf{x} = [x,y,z] and the unit normal vector, pointing out of the fluid domain, is defined as n=[nx,ny,nz]\mathbf{n} = [n_{x},n_{y},n_{z}].

  • A body-fixed reference frame Rb=(Ob,ex~,ey~,ez~)\mathit{R}_{b} = (\mathbf{O}_{b},\mathbf{e}_{\tilde{x}},\mathbf{e}_{\tilde{y}},\mathbf{e}_{\tilde{z}}), with position and normal vectors x~=(x~,y~,z~)\tilde{\mathbf{x}} = (\tilde{x},\tilde{y},\tilde{z}) and n~=[n~x,n~y,n~z]\tilde{\mathbf{n}} = [\tilde{n}_{x},\tilde{n}_{y},\tilde{n}_{z}].

The instantaneous submerged body surface is denoted as SbS_{b}, while the time-invariant mean body surface is S0S_{0}. Moreover, following Lee [27], a constant distance z~0\tilde{z}_{0} can be introduced, allowing for a vertical displacement of O\mathbf{O} from the free-surface, and of Ob\mathbf{O}_{b} along the body axis ez~\mathbf{e}_{\tilde{z}}.

Rigid body kinematics

The body is considered free to move in all 6 DoFs, with ξ=[ξ1,ξ2,ξ3]=OO‾b\boldsymbol{\xi} = [\xi_{1},\xi_{2},\xi_{3}] = \overline{\mathbf{O}\mathbf{O}}_{b}, denoting the vector of translational body motions. The vector of rotational motions α=[α1,α2,α3]\boldsymbol{\alpha} = [\alpha_{1},\alpha_{2},\alpha_{3}] is defined through the relative rotation between the axes of the two reference frames. Further assuming α\boldsymbol{\alpha} consists of Tait-Bryan angles, and adopting the “xyz” convention of elementary rotations, the transformation matrix R\mathcal{R} is introduced,

R=[cos⁡α3cos⁡α2sin⁡α3cos⁡α2−sin⁡α2−sin⁡α3cos⁡α1+cos⁡α3sin⁡α2sin⁡α1cos⁡α3cos⁡α1+sin⁡α3sin⁡α2sin⁡α1cos⁡α2sin⁡α1sin⁡α3sin⁡α1+cos⁡α3sin⁡α2cos⁡α1−cos⁡α3sin⁡α1+sin⁡α3sin⁡α2cos⁡α1cos⁡α2cos⁡α1](1)\mathcal{R} = \begin{bmatrix} \cos\alpha_{3}\cos\alpha_{2} & \sin\alpha_{3}\cos\alpha_{2} & -\sin\alpha_{2} \\ -\sin\alpha_{3}\cos\alpha_{1}+\cos\alpha_{3}\sin\alpha_{2}\sin\alpha_{1} & \cos\alpha_{3}\cos\alpha_{1}+\sin\alpha_{3}\sin\alpha_{2}\sin\alpha_{1} & \cos\alpha_{2}\sin\alpha_{1} \\ \sin\alpha_{3}\sin\alpha_{1}+\cos\alpha_{3}\sin\alpha_{2}\cos\alpha_{1} & -\cos\alpha_{3}\sin\alpha_{1}+\sin\alpha_{3}\sin\alpha_{2}\cos\alpha_{1} & \cos\alpha_{2}\cos\alpha_{1} \end{bmatrix} \tag*{(1)}

The definition of the position vector for the global reference frame is defined for an arbitrary point M as OM=x\mathbf{OM}=\mathbf{x}, shown in Figure 1 and ObM=Rx~\mathbf{O_bM}=\mathcal{R}\tilde{\mathbf{x}}. The relationship between the position and normal vectors in ROR_O and the respective vectors in RbR_b is,

x=OM=OOb+OMb=ξ+Rx~(2)\mathbf{x}=\mathbf{OM}=\mathbf{OO_b}+\mathbf{OM_b}=\boldsymbol{\xi}+\mathcal{R}\tilde{\mathbf{x}} \tag*{(2)}
n=Rn~(3)\mathbf{n}=\mathcal{R}\tilde{\mathbf{n}} \tag*{(3)}

It is convenient to also define the generalised motion vector ξ\boldsymbol{\xi} and normal vectors n\mathbf{n}, n~\tilde{\mathbf{n}} in all 6 DoFs as,

ξ=[ξα]n=[nx×n]n~=[n~x~×n~](4)\boldsymbol{\xi}= \begin{bmatrix} \boldsymbol{\xi}\\ \boldsymbol{\alpha} \end{bmatrix} \qquad \mathbf{n}= \begin{bmatrix} \mathbf{n}\\ \mathbf{x}\times\mathbf{n} \end{bmatrix} \qquad \tilde{\mathbf{n}}= \begin{bmatrix} \tilde{\mathbf{n}}\\ \tilde{\mathbf{x}}\times\tilde{\mathbf{n}} \end{bmatrix} \tag*{(4)}

Exact boundary value problem

Assuming a homogeneous, incompressible and inviscid fluid and an irrotational flow, the latter can be fully described through a scalar velocity potential field ϕ=ϕ(x,t)\phi=\phi(\mathbf{x},t), so that the fluid velocity is given as u=∇ϕ\mathbf{u}=\nabla\phi. A fluid domain D\mathcal{D} is considered, bounded by a free surface at z=η(x,y,t)z=\eta(x,y,t), by a seabed of finite and constant depth hh at z=−hz=-h and by the body’s surface SbS_b. Under these assumptions, the mass conservation law is replaced by the Laplace equation throughout the fluid domain D\mathcal{D}. Furthermore, an impermeability boundary condition is considered on the seabed and the body boundary, along with the dynamic and kinematic free-surface boundary conditions. The exact boundary value problem is formulated as,

∇2ϕ=0x∈D(5)\nabla^2 \phi= 0 \qquad\mathbf{x} \in D \tag*{(5)}
∂zϕ=0z=−h(6)\partial_z \phi= 0 \qquad z = -h \tag*{(6)}
∂tη+∇hϕ⋅∇hη−∂zϕ=0z=η(x,y,t)(7)\partial_t \eta+ \nabla_h \phi\cdot\nabla_h \eta- \partial_z \phi= 0 \qquad z = \eta(x,y,t) \tag*{(7)}
∂tϕ+gη+12∇ϕ⋅∇ϕ=0z=η(x,y,t)(8)\partial_t \phi+ g\eta+ \frac{1}{2}\nabla\phi\cdot\nabla\phi= 0 \qquad z = \eta(x,y,t) \tag*{(8)}
∇ϕ⋅n=∂tx⋅nx∈Sb(9)\nabla\phi\cdot\mathbf{n} = \partial_t\mathbf{x} \cdot\mathbf{n} \qquad\mathbf{x} \in S_b \tag*{(9)}

where ∂q\partial_q denotes the derivative with respect to qq and ∇h=(∂x,∂y)\nabla_h = (\partial_x,\partial_y) denotes the gradient in the horizontal plane.

Hydrodynamic loads

Solution of the exact boundary value problem would provide the nonlinear velocity potential, which is related to the pressure through the Bernoulli equation

p(x,t)=−ρ(∂tϕ(x,t)+12∇ϕ(x,t)⋅∇ϕ(x,t)+g(z+z~0))(10)p(\mathbf{x},t) = -\rho\left(\partial_t\phi(\mathbf{x},t) + \frac{1}{2}\nabla\phi(\mathbf{x},t) \cdot\nabla\phi(\mathbf{x},t) + g(z+\tilde{z}_0)\right) \tag*{(10)}

where, without loss of generality, the Bernoulli constant is considered zero. The fully nonlinear wave loads are then obtained by integration of the pressure on the exact body surface Sb(t)S_b(t),

F(t)=[F(t)Q(t)]=∫Sb(t)p(x,t)n dS(11)\mathbf{F}(t) = \begin{bmatrix} \mathbf{F}(t)\\ \mathbf{Q}(t) \end{bmatrix} = \int_{S_b(t)} p(\mathbf{x},t)\mathbf{n}\,\mathrm{d}S \tag*{(11)}

where the generalised 6DoF vector F\mathbf{F} includes the forces F\mathbf{F} and the moments Q\mathbf{Q}.

Second-order radiation-diffraction theory

The boundary value problem described by (5)–(9) is highly nonlinear. More precisely, apart from the nonlinear terms in (7)–(9), the free-surface conditions are also expressed on the unknown free-surface elevation. In addition, the body boundary condition is applied on the time-variant instantaneous wetted surface SbS_b, while the same surface is used for the pressure integration in (11). Most state-of-the-art radiation-diffraction tools solve the problem using the perturbation approach [27, 32], which is outlined in the present section.

Body kinematics in orders

The problem can be simplified through perturbation of the wave and body motion variables in a power series with respect to a small parameter ϵ\epsilon. Traditionally, this perturbation analysis is performed in nondimensional variables, in which case ϵ\epsilon corresponds to the wave steepness. However, dimensional variables are used throughout the present analysis, so that ϵ\epsilon has no direct physical meaning and is only used to indicate the order of magnitude. The body motions are accordingly developed in perturbation series as,

ξ=ξ(1)+ξ(2)+O(ϵ3)α=α(1)+α(2)+O(ϵ3)(12)\boldsymbol{\xi} = \boldsymbol{\xi}^{(1)} + \boldsymbol{\xi}^{(2)} + O(\epsilon^3) \qquad \boldsymbol{\alpha} = \boldsymbol{\alpha}^{(1)} + \boldsymbol{\alpha}^{(2)} + O(\epsilon^3) \tag*{(12)}

where q(m)q^{(m)} denotes a quantity qq of order mm and O(ϵm)O(\epsilon^m) includes terms of order mm and higher. The transformation matrix R\mathbf{R} can also be developed as,

References

  1. [1]Agarwal, P. & Manuel, L. 2011 Incorporating irregular nonlinear waves in coupled simulation and reliability studies of offshore wind turbines. Applied Ocean Research 33 (3), 215–227.
  2. [2]Bai, W. & Eatock Taylor, R. 2006 Higher-order boundary element simulation of fully nonlinear wave radiation by oscillating vertical cylinders. Applied Ocean Research 28 (4), 247–265.
  3. [3]Bingham, H. B. 1994 Simulating ship motions in the time domain. PhD thesis, Massachusetts Institute of Technology.
  4. [4]Bingham, H. B. 2000 A hybrid boussinesq-panel method for predicting the motion of a moored ship. Coastal Engineering 40 (1), 21–38.
  5. [6]Bredmose, H., Mignacco, M. & Pegalajar-Jurado, A. 2024 A force model for non-slender bodies in fully nonlinear waves. In The 39th International Workshop on Water Waves and Floating Bodies, St Andrews, Scotland.
  6. [7]Bredmose, H. & Pegalajar-Jurado, A. 2021 Second-order monopile wave loads at linear cost. Coastal Engineering 170, 103952.
  7. [8]Canard, M., Ducrozet, G. & Boussacasse, B. 2022 Varying ocean wave statistics emerging from a single energy spectrum in an experimental wave tank. Ocean Engineering 246, 110375.
  8. [9]Chen, X. 2007 Middle-field formulation for the computation of wave-drift loads. Journal of Engineering Mathematics 59 (1), 61–82.
  9. [10]Cummins, W. E. 1962 The impulse response functions and ship motion. Schiffstechnik 9, 101–109.
  10. [11]Dermatis, A. 2026 Efficient prediction of short-term extreme hydrodynamic responses of marine structures. PhD thesis, École Centrale de Nantes.
  11. [12]Dermatis, A., Bouscasse, B., Ducrozet, G., Bredmose, H. & Bingham, H. B. 2025 Prediction of the extreme slow-drift response of moored floating structures using design waves. Ocean Engineering 333, 121456.
  12. [13]Ducrozet, Guillaume, Bingham, Harry B., Engsig-Karup, Allan Peter & Ferrant, Pierre 2010 High-order finite difference solution for 3d nonlinear wave-structure interaction. Journal of Hydrodynamics, Ser. B 22 (5, Supplement 1), 225–230.
  13. [14]Ducrozet, G., Bonnefoy, F., Le Touzé, D. & Ferrant, P. 2012 A modified high-order spectral method for wavemaker modeling in a numerical wave tank. European Journal of Mechanics - B/Fluids 34, 19–34.
  14. [15]Ducrozet, Guillaume, Charlou, Moran & Bonnefoy, Félicien 2026 Hos-ocean v2.1: Extensions of a nonlinear wave solver based on the high-order spectral method. Computer Physics Communications 323, 110098.DOI
  15. [16]Engsig-Karup, A.P., Bingham, H.B. & Lindberg, O. 2009 An efficient flexible-order model for 3d nonlinear water waves. Journal of Computational Physics 228 (6), 2100–2118.
  16. [17]Faltinsen, O. M. 1990 Sea loads on ships and offshore structures. Cambridge University Press.
  17. [18]Faltinsen, O. M., Newman, J. N. & Vinje, T. 1995 Nonlinear wave loads on a slender vertical cylinder. Journal of Fluid Mechanics 289, 179–198.DOI
  18. [19]Ferrant, P., Le Touzé, D. & Pelletier, K. 2003 Non-linear time-domain models for irregular wave diffraction about offshore structures. International Journal for Numerical Methods in Fluids 43 (10-11), 1257–1277.
  19. [20]Fitzgerald, C. J., Taylor, P. H., Eatock Taylor, R., Grice, J. & Zang, J. 2014 Phase manipulation and the harmonic components of ringing forces on a surface-piercing column. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 470 (2168), 20130847.
  20. [22]International Electrotechnical Commission 2020 IEC TS 61400-3-2 Wind energy generation systems - Part 3-2: Design requirements for floating offshore wind turbines. IEC.
  21. [23]Kim, S., De Hautecoclocque, G., Bouscasse, B., Lasbleis, M. & Ducrozet, G. 2024 Experimental analysis of extreme wave loads on a containership. Ocean Engineering.DOI
  22. [24]Kim, Y. & Kim, J. H. 2016 Benchmark study on motions and loads of a 6750-TEU containership. Ocean Engineering 119, 262–273.
  23. [25]Kristiansen, T. & Faltinsen, O. M. 2017 Higher harmonic wave loads on a vertical cylinder in finite water depth. Journal of Fluid Mechanics 833, 773–805.
  24. [26]Kurnia, R. & Ducrozet, G. 2023 NEMOH: Open-source boundary element solver for computation of first- and second-order hydrodynamic loads in the frequency domain. Computer Physics Communications 292, 108885.
  25. [27]Lee, C. H. 1995 Wamit theory manual. Tech. Rep.. Massachusetts Institute of Technology.
  26. [28]Malenica, S., Blanc, A., Jagite, G. & de Hautecoclocque, G. 2025 Practical evaluation of the second order loads in time domain. In 40th International Workshop on Water Waves and Floating Bodies.
  27. [29]Molin, B. 1979 Second-order diffraction loads upon three-dimensional bodies. Applied Ocean Research 1 (4), 197–202.
  28. [30]Morison, J. R., Johnson, J. W & Schaaf, S. A 1950 The force exerted by surface waves on piles. Journal of Petroleum Technology 2 (05), 149–154.
  29. [31]Newman, J. N. 1974 Second-Order, Slowly-varying Forces on Vessels in Irregular Waves. Massachusetts Institute of Technology.
  30. [32]Newman, John Nicholas 2018 Marine hydrodynamics. MIT press.
  31. [34]Pinkster, J. A. 1980 Low frequency second order wave exciting forces on floating structures. PhD thesis, Mechanical, Maritime and Materials Engineering, TU Delft.
  32. [35]Rainey, R. C. T. 1995 Slender-body expressions for the wave load on offshore structures. Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences 450, 391–416.
  33. [36]Rienecker, M. & Fenton, J. 1981 A fourier approximation for steady water waves. Journal of Fluid Mechanics 104, 119 – 137.
  34. [37]Robertson, A. N., et al 2020 OC6 Phase I: Investigating the underprediction of low-frequency hydrodynamic loads and responses of a floating wind turbine. Journal of Physics: Conference Series 1618, 032033.
  35. [38]Robertson, A. N., et al. 2017 OC5 Project Phase II: Validation of Global Loads of the DeepCwind Floating Semisubmersible Wind Turbine. Energy Procedia 137, 38–57.
  36. [39]Schlöer, S., Bredmose, H. & Bingham, H. 2016 The influence of fully nonlinear wave forces on aero-hydro-elastic calculations of monopile wind turbines. Marine Structures 50, 162–188.
  37. [40]Shao, Y. & Faltinsen, O. M. 2010 Use of body-fixed coordinate system in analysis of weakly nonlinear wave-body problems. Applied Ocean Research 32 (1), 20–33.
  38. [41]Shao, Y., Zheng, Z., Liang, H. & Chen, J. 2022 A consistent second-order hydrodynamic model in the time domain for floating structures with large horizontal motions. Computer-Aided Civil and Infrastructure Engineering 37 (7), 894–914.
  39. [42]Sharma, J. N. & Dean, R. G. 1981 Second-Order Directional Seas and Associated Wave Forces. Society of Petroleum Engineers journal 21 (1), 129–140.
  40. [43]Stokes, George Gabriel 1847 On the theory of oscillatory waves. Transactions of the Cambridge Philosophical Society 8, 441–455.
  41. [44]Teng, B. & Cong, P. 2017 A novel decomposition of the quadratic transfer function (QTF) for the time-domain simulation of non-linear wave forces on floating bodies. Applied Ocean Research 65, 112–128.DOI
  42. [45]Teng, B., Cong, P. & Gou, Y. 2018 Nonlinear time-domain theory for the simulation of moored floating body motion. Journal of Marine Science and Application 17, 341–352.DOI
  43. [46]Teng, B., Jin, R. & Cong, L. 2016 A twice expansion analysis method in the time-domain for wave action on a floater translating with a large amplitude. Ocean Engineering 118, 138–151.DOI
  44. [47]Walker, D. A. G., Taylor, P. H. & Eatock Taylor, R. 2004 The shape of large surface waves on the open sea and the draupner new year wave. Applied Ocean Research 26 (3-4), 73–83.DOI

Paper details

vlnc:W_5qs8ueqs
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents