WorksPhysics and Astronomy
Mapping the Evolving Cosmic Web on the Lightcone with WebON: HOLI Mock Strategy
Abstract
Wide-area spectroscopic surveys such as DESI require large ensembles of mock catalogues that follow gravitational evolution and tracer populations across the observer's past lightcone. We present WebON (Web ON the lightcone), a fast method for mapping the evolving dark-matter cosmic web onto the lightcone without periodic-box replication or the stitching of separately evolved snapshot shells. Displacements computed at a limited set of redshifts are combined with a particle-wise Zel'dovich estimate of the emission redshift and a continuous-redshift correction, allowing lightcone positions to be generated in a single forward pass. The method supports regularised ALPT and eALPT gravity solvers, with an optional short-range ridging correction. We illustrate full-sky matter and cosmic-web evolution and find percent-level agreement between lightcone and fixed-redshift angular power spectra over the tested redshift and multipole ranges, providing an internal consistency check of the lightcone construction. Optional modules address approximate relativistic position corrections and local primordial non-Gaussianity. Finally, we show how the spectral cosmic-web hierarchy connects WebON to the HOLI (Higher Order LIghtcone) mock strategy, in which post-processing ridging and calibrated HICOBIAN bias and subgrid prescriptions can recover tracer clustering beyond the nominal resolution of the ALPT matter field. Independent comparisons of ridged LPT matter fields with Abacus N -body simulations and published percent-level tests of the hierarchical tracer-bias model complement the lightcone consistency measurements presented here.
Prepared for submission to JCAP
Author affiliations are listed at the end of the manuscript.
Introduction
The Dark Energy Spectroscopic Instrument (DESI) is mapping large-scale structure over an unprecedented combination of comoving volume and redshift range, providing precision baryon acoustic oscillation (BAO) and redshift-space distortion (RSD) measurements from multiple tracer populations. Robust inference requires mock catalogues that capture gravitational evolution, tracer clustering, and survey selection, in numbers sufficient for covariance estimation and systematic tests.
High-resolution -body simulations accurately model nonlinear structure formation but face a demanding volume–resolution–cost trade-off when thousands of DESI-scale realisations are required. Fast approximate gravity solvers coupled to calibrated field-level tracer models offer a complementary approach: large-scale matter evolution is computed explicitly, while unresolved tracer physics is represented statistically.
The cosmic web—the network of knots, filaments, sheets, and voids—provides a natural connection between gravity and tracer formation [e.g., 1]. It is relevant to baryons in filaments [2, 3, 4], BAO analyses using voids [5, 6, 7], RSD constraints [8, 9], tests of dark energy and modified gravity [10, 11, 12, 13, 14], and galaxy formation as a function of environment [e.g., 15–34]. Different web classifiers emphasise different aspects of the matter and velocity fields [35]; for tracer modelling, this is useful rather than merely ambiguous because classification at different scales captures complementary nonlocal information.
The underlying dynamics can be formulated through the Lagrangian–Eulerian map
where is the displacement field [see 36, for a review]. In potential-flow approximations, , and potential Hessians describe anisotropic gravitational collapse. The tidal tensor , with , provides a familiar web descriptor [e.g., 37–39]. However, tracer bias involves nonlinear and nonlocal contributions (beyond local-in-matter-density bias) that cannot be fully captured by any single tidal classification [see 40–42, and references therein].
A spectral hierarchy of web operators can encode tidal and higher-derivative information in a compact environmental representation [43, 44]. Indeed, nonlinear and nonlocal bias mappings incorporating cosmic-web dependencies have been shown to emulate the effects of modified gravity on tracer clustering, even when applied to standard CDM density fields [45].
The main contribution of this work is WebON, which assigns particle emission redshifts and evaluates approximate gravitational displacements directly on a continuously evolving dark-matter lightcone. We present its numerical construction and examine the internal consistency of the resulting matter and cosmic-web fields as they evolve along the lightcone. We then describe how those fields enter HOLI (Higher Order LIghtcone mocks), through spectral web classification and the environment-conditioned HICOBIAN bias model [43]. The present figures focus on the internal consistency of the WebON lightcone construction. Independently, comparisons of ridged LPT matter fields against Abacus -body simulations [46] and the demonstrated accuracy of HICOBIAN halo clustering on coarse ALPT fields [43] establish the performance of complementary components. Their combination and extension to tracer-specific lightcone catalogues are the subject of companion studies (Forero-Sánchez et al. and Tang et al., in preparation).
Section § 2 introduces WebON and its optional extensions. Section § 3 connects its cosmic-web fields to the HOLI mock strategy. Section § 4 presents lightcone, angular-clustering, and large-scale consistency tests. We conclude in Sec. § 5.
WebON: Dark-Matter Lightcone Production
WebON constructs observer-centred dark-matter lightcones from periodic initial conditions without replicating the simulation volume or joining independently evolved matter shells. Its inputs are approximate displacement fields computed at a selected set of redshifts. The lightcone is assembled by assigning each particle an emission redshift, correcting the stored displacement to that redshift, and selecting its observer-centred position. The same procedure can be used with different approximate gravity solvers.
Displacement snapshots and lightcone crossing
We first compute and store displacement fields at the chosen redshift-bin boundaries using regularised Lagrangian perturbation theory (LPT), as well as the first-order displacement . The subsequent particle loop may be parallelised in redshift-bin chunks. At each Lagrangian coordinate , the initial estimate is defined by the observer distance,
where denotes the comoving distance–redshift relation and the observer position. With the linear growth factor normalised to , a Zel’dovich proxy gives
and the approximate emission redshift follows from
This estimate incorporates coherent bulk flows without repeatedly evaluating the full gravity solver. It does not, by itself, solve the final approximate trajectory’s lightcone-crossing condition.
For at the lower boundary of the relevant redshift interval, we evaluate the displacement using
with sufficiently close displacement snapshots for the linear increment to remain subdominant. We then assign and apply the lightcone selection at . An optional relativistic coordinate correction can be added as described in § 2.3.1. The residual
quantifies the difference between the Zel’dovich emission-redshift proxy and the final approximate trajectory; it should be assessed against the radial resolution required for the analysis.
Gravity solvers, short-range completion, and velocities
We use regularised LPT solvers at particle/mesh scales of approximately –, rather than attempting to resolve individual galaxy-host haloes. Augmented LPT (ALPT) [47] combines large-scale 2LPT displacements with a spherical-collapse-inspired ultraviolet regularisation and is used at coarser resolution (). Eulerian-ALPT (eALPT) [48] incorporates iterative Eulerian corrections, including effective stress-tensor contributions and controlled vorticity, and is used at finer resolution ().
An optional short-range Eulerian ridging correction can be applied to precomputed ALPT or 2LPT displacements [46]. This post-processing step sharpens dense ridges without repeating the long-range gravity calculation; its clustering performance depends on the adopted calibration. Tetrahedral phase-space mapping can additionally reduce discreteness artefacts in mesh-based density reconstruction [49].
Peculiar velocities are computed in post-processing based on the (e)ALPT and LPT displacement fields, using
where is the linear growth rate and denotes the corresponding second-order growth-rate factor in the adopted perturbative scheme. This construction recovers the linear large-scale velocity relation while retaining a solver-dependent approximation to nonlinear corrections. The residual displacement is assigned a second-order growth rate; for regularised or iterated solvers, this is an effective velocity prescription rather than an exact time derivative of the full trajectory. When using eALPT, the dependence on the full displacement field permits retaining any vorticity component generated by the Eulerian extension. Here denotes the dynamical displacement, before the optional GR coordinate shift; the latter should not be interpreted as an additional physical peculiar velocity.
Optional ultra-large-scale extensions
The following modules extend the baseline lightcone calculation but do not alter its particle-wise emission-redshift construction.
Approximate relativistic position correction
The displacement fields used in WebON are computed in Newtonian perturbation theory. This is an excellent approximation for the DESI clustering regime, but it formally neglects relativistic constraint corrections that become relevant on ultra-large (horizon-approaching) scales. Following Hahn and Paranjapee [50], we optionally include an approximate position-level correction that maps simulation-like particle positions to their Newtonian-gauge counterparts on ultra-large scales.
Helmholtz form and screened kernel. A convenient way to encode the relativistic constraint correction is through a Helmholtz-type modification of the Poisson relation for the potential,
with a time-dependent screening wavenumber. Here the positive cosmological prefactor in the potential equation has been absorbed into at fixed redshift; this rescaled potential should be distinguished from the primordial potential used in § 2.3.2. We use the Fourier convention and . The Helmholtz construction motivates the screening scale used below. However, WebON does not rerun the gravitational evolution with the screened force kernel. Instead, it applies the approximate position-level transformation derived by Hahn and Paranjapee 2016 [50] to the completed simulation-like lightcone. The Helmholtz relation itself reads in Fourier space
so that the associated gradient kernel, written in displacement notation as , becomes
The Helmholtz kernel regularises the response of the potential on scales comparable to the screening length. In particular, the difference between the screened and Newtonian force displacements is
For , this difference is proportional to .
This screened-force displacement is introduced only to motivate the relativistic screening scale. It is not the correction applied in WebON. The implemented correction is instead the position-level transformation from simulation-like to approximate Newtonian-gauge particle positions described below.
Implementation used in WebON. In WebON, we implement the approximate position-level gauge transformation proposed by Hahn and Paranjapee 2016 [50] as an additional displacement field computed on the mesh and evaluated at the particle emission redshift. Specifically, the displacement that maps simulation-like particle positions to their approximate Newtonian-gauge counterparts is written as
where
and is the relativistic screening scale. In terms of the conformal Hubble rate,
the screening length is in the growing-mode approximation. Using the approximation for below gives
where we have used . Equivalently, this expression may be written as
The corresponding Fourier-space displacement is
with the zero mode set to zero. On the ultra-large scales relevant for this correction, where the density evolution can be approximated by linear growth,
and therefore
This correction is added to the simulation-like particle position, , and should not be confused with replacing the full Newtonian displacement by the Helmholtz-screened force displacement.
Regime of relevance and numerical aspects. For standard DESI BAO and RSD analyses, the dominant modes lie well inside the horizon, where the relative correction scales as . Its size depends on both redshift and wavenumber; consequently, a single redshift-independent cutoff should not be used to define where it is negligible. Figure 7 illustrates this dependence explicitly, including high-redshift tests beyond the main DESI lightcone range. Nevertheless, including is useful for applications involving horizon-scale modes (e.g. ultra-large-scale clustering, relativistic lightcone effects, or cross-correlations with CMB/ISW-like observables), and its computational overhead is small because it requires only an additional FFT-based vector operator rather than a new gravitational evolution.
Figure 7. Figure 7. Power-spectrum response to the Hahn–Paranjape relativistic position correction implemented in WebON. We show the ratio for dark-matter fields evolved with the standard Newtonian displacement and with the additional GR screening displacement described in § 2.3.1. The correction is negligible on quasi-linear and nonlinear scales, where the ratio approaches unity, but becomes visible on the largest modes because the displacement correction is infrared-enhanced. The curves show , and . The increasingly pronounced departure below unity at high redshift corresponds to enhanced power in the corrected density field, consistent with the linear prediction derived in § 4.3. The approach to unity towards higher illustrates the decreasing importance of the correction on subhorizon scales. This is a test of the position transformation, rather than a screened-force evolution or a complete relativistic lightcone calculation.
Numerically, enhances the infrared, so one must treat the mode consistently (set to zero in a periodic box) and adopt consistent Fourier conventions. Because the correction is evaluated at the emission redshift and does not introduce additional snapshot stitching, it preserves the continuous-redshift structure of the WebON construction. The comparison with the power-spectrum ratio in Figure 7 is discussed in § 4.3. This position correction alone does not constitute a complete relativistic prediction for observed number counts: photon propagation, observed-redshift perturbations, magnification, and selection effects require a consistent treatment of light propagation and survey observables.
Local primordial non-Gaussianity
WebON can construct lightcones from initial conditions with local primordial non-Gaussianity (PNG), parameterised by . The primordial potential is generated as
where is a Gaussian random field. The resulting potential is converted into the initial density and displacement fields using the same transfer-function, growth-factor, and Fourier conventions as in the Gaussian case. The subsequent WebON lightcone construction is unchanged. For a biased tracer, local PNG generates the large-scale response
where
for a dimensionless potential extrapolated to the present-day large-scale convention and a growth factor normalised to . If and are instead defined in the primordial matter-era (CMB) convention, the right-hand side of Eq. (22) must include the factor , where and lies in matter domination. The potential, input , and reference simulations must all use the same convention. In units with , the explicit factor of is omitted. A commonly used parametrisation of the PNG response is
where corresponds to the universal-mass-function prediction, while more general tracer selections may require a calibrated . Since on sufficiently large scales, Eq. (21) yields the characteristic response [51].
A companion study, Primordial non-Gaussianity as a large-scale cosmic-web bias [52], shows that this scale-dependent response can be reformulated as a nonlocal, anisotropic environmental-bias effect. The construction introduces the large-scale Hessian field
whose trace satisfies
Its trace therefore carries the same inverse-Laplacian, or , enhancement that appears in the local-PNG scale-dependent bias. Diagonalising defines four large-scale knot-, filament-, sheet-, and void-like environments. These should not be interpreted as the conventional nonlinear cosmic web: they are large-scale, nonlocal environments designed to isolate the PNG response.
The companion analysis assigns one weight to each of these four environments and tests the construction against the AbacusPNG simulations with . The four environmental weights reproduce the large-scale rise or suppression of the tracer bias found in the corresponding non-Gaussian simulations. They also exhibit a robust sign-dependent hierarchy,
so that positive PNG preferentially enhances knot-like environments, whereas negative PNG reverses the ordering and gives the largest relative weight to void-like environments.
The reconstruction can be extended towards higher wavenumbers by including the standard tidal tensor
Four additional, factorised tidal-environment weights capture the residual anisotropic response not described by the Hessian alone. The resulting eight-weight model reproduces the measured PNG power-spectrum response within the cosmic-variance uncertainty of the simulation ensemble over the tested range.
This construction provides a complementary route to PNG lightcone mocks. Existing Gaussian halo or galaxy catalogues can be reweighted or downsampled according to their large-scale web environment, imprinting an effective local-PNG scale-dependent bias while retaining the positions and velocities of the selected objects and the underlying catalogue geometry. Environmental weighting changes clustering by design and can also alter the number density and effective selection; these must be controlled when matching the target sample. It is not a substitute for fully non-Gaussian initial conditions, since it does not reproduce PNG-modified formation histories, halo abundances, or all higher-order correlations. Within the HOLI strategy, the two approaches are therefore complementary: PNG initial conditions in WebON provide the dynamical route, while large-scale web weighting provides a fast emulator for massive mock production and controlled systematic tests.
We will extend these tests to evolving PNG lightcones, measuring the redshift dependence of the scale-dependent bias and its dependence on tracer selection. The programme will compare PNG initial conditions with redshift-dependent environmental weighting, test the expected scaling, and assess how broad redshift windows mix the evolving response. Matched Gaussian and non-Gaussian realisations will help isolate the response from sample variance. We will also investigate its separation from the GR position correction in § 2.3.1; their large-scale enhancement is similar, but the two terms have different origins and must be compared using consistent gauge and potential conventions. These lightcone-evolution studies are planned extensions of the fixed-redshift validation in Figure 8.
Figure 8. Recovery of the large-scale bias signature of local primordial non-Gaussianity using ALPT dark-matter fields. The test adopts a power-law tracer-bias prescription, , with , at , using ten realisations in a periodic box of side length on a mesh. Top: Scale-dependent bias difference, , for , and . The measurements recover the characteristic Dalal et al. [51] behaviour towards small wavenumbers, with positive and negative producing an enhancement and suppression, respectively. Dashed curves show the corresponding fits. Bottom: Fitted amplitude as a function of , showing an approximately linear response. This fixed-redshift test isolates the leading PNG bias signature; its extension to evolving lightcones is discussed in § 2.3.2.
Accuracy considerations and practical choices
The main numerical checks concern snapshot interpolation, the accuracy of emission-redshift assignment, and the finite simulation volume.
Snapshot spacing and continuous-redshift correction. Equation (5) assumes that the displacement difference between the target redshift and the stored displacement at is well captured by a linear LPT increment. This is satisfied when snapshots are spaced such that the correction remains a perturbative adjustment rather than the dominant contribution. In practice, one can monitor the distribution of the relative correction amplitude, , excluding near-zero denominators or using an rms normalisation. Because the nonlinear residual is inherited from a stored field, the linear correction alone does not guarantee exact continuity at every bin boundary; convergence with snapshot spacing and direct boundary tests remain necessary.
Boundary conditions and observer placement. Because the lightcone is extracted from a periodic cube, the observer placement and maximum redshift determine which parts of the cube contribute. WebON avoids replication by construction. For a full-sky sphere centred in a cube of side length , the selected radius must lie within the available volume, with an appropriate boundary margin; in the centred idealisation, . Sky maps and rotation tests can reveal boundary artefacts, while the absence of modes longer than the box remains a finite-volume limitation.
Recommended diagnostics. For production we recommend: (i) angular power spectra in several redshift shells, (ii) redshift evolution of and redshift-space multipoles in thin bins, and (iii) cross-correlations between web levels and reference halo fields to ensure that tidal and curvature information is preserved across the working range of .
Hierarchical Cosmic-Web Modelling and the HOLI Strategy
The HOLI pipeline uses the phase-coherent matter field of WebON to generate tracer populations through hierarchical cosmic-web conditioning, field-level bias, and calibrated subgrid models. A schematic tracer-bias expansion illustrates the local-in-matter-density and nonlocal contributions that motivate this approach:
Here and are invariants of the traceless tidal and density-curvature tensors defined below; represents stochastic bias. The expansion is illustrative, not a complete renormalised operator basis: mixed operators, further higher derivatives, time-dependent contributions and renormalisation subtractions are omitted [40, 41, 43].
Spectral hierarchy and its bias operators
For the matter overdensity , define the spectral operator ladder
The inverse operators are evaluated for , with the zero mode set to zero. A common smoothing and mesh-assignment convention must be used when comparing levels, especially because positive powers of amplify fluctuations near the mesh cutoff. Each level emphasises a different spatial regime:
: long-range tidal fields (potential/tidal-tensor web),
: curvature (density-Hessian web),
: higher-derivative short-range response levels.
At each level, the symmetric Hessian
is diagonalised to classify each cell as a knot, filament, sheet or void according to whether three, two, one or zero eigenvalues exceed a specified threshold. The associated eigenvalues also determine the scalar tensor invariants relevant to nonlocal tracer bias.
At , with , so is the tidal tensor . Its traceless part is
whose quadratic and cubic invariants are and . At , , so the density-curvature tensor satisfies . Its traceless part,
defines and . The opposite sign of relative to must be respected when assigning curvature-web labels. These tensors connect the long-range tidal and shorter-range density-curvature information to the corresponding invariants in Eq. (29) [43].
Figure 1 illustrates this connection. Both spectral levels are derived independently from the same matter field, rather than by applying the curvature operator to the tidal web. Each yields four eigenvalue-defined environments; combining their classifications produces joint subregions . Within each subregion, HICOBIAN calibrates a positive-definite conditional mean tracer count , which is converted into discrete counts by stochastic sampling. Thus, the response is local in conditional on , but implicitly nonlocal in the underlying matter field. The complete eigenvalue triplets determine the scalar invariants, whereas four-valued web labels retain only a compressed representation; the predictive accuracy must therefore be established by calibration and validation.
Figure 1. Spectral cosmic-web classification as a compact representation of nonlinear, nonlocal tracer bias. The evolving WebON matter-density field feeds two parallel spectral branches: the inverse-Laplacian tidal level (, blue) and the density-curvature level (, orange). The corresponding traceless tensors yield the quadratic and cubic bias invariants , and , , respectively. Eigenvalue-threshold classification independently identifies knots (K), filaments (F), sheets (S) and voids (V) at each level. The unfilled grid represents the 16 joint environments , with examples , , and ; all other class pairs are included. Within each environment, HICOBIAN models the conditional mean tracer count . The distinct plotted curves are illustrative, not fitted responses. Stochastic sampling converts the conditional means into discrete tracer counts . Levels extend the hierarchy towards finer higher-derivative morphology.
With the sign convention of Eq. (30), eigenvalue thresholds must be defined consistently at each level, whose tensors also have different dimensions. The boundaries between environments need not be sharp: fuzzy membership functions can assign continuous degrees of membership to each web class [53]. Thresholds may be fixed or calibrated in redshift shells, provided their evolution does not induce artificial changes in web-volume fractions. The hierarchy is motivated by perturbative operator structure but its calibrated nonlinear responses are not restricted to a finite-order bias expansion.
The and morphologies are illustrated separately in Figure 4 and Figure 5, while emphasise progressively finer spatial structure.
Figure 4. Slices through the potential-like field underlying the tidal-web classification ( level of the spectral hierarchy) computed on the two representative lightcone boxes shown in Figure 3, in the same top/bottom order. The inverse-Laplacian weighting emphasises long-range structure; taking the Hessian of this scalar gives the tidal tensor used for environmental classification. See Eqs. (30) and (31).

Figure 5. Slices through the field underlying the density-curvature web ( level of the spectral hierarchy), computed on the same two lightcone boxes and displayed in the same order as Figure 3. At this level the scalar kernel is , so the curvature information enters through the Hessian of the resulting field. Compared with the potential-like field in Figure 4, this level retains more local density structure and supplies complementary information for environment-conditioned bias modelling.
Mock-making context and HOLI workflow
Figure 2 summarises the four stages: (1) WebON matter and velocity lightcones; (2) environmental segmentation and effective tracer number-count modelling; (3) subgrid tracer positions and velocities; and (4) optional tracer-property assignment followed by survey selection. The matter mesh (typically –) is not required to resolve each galaxy-host halo; the distinction between resolved matter dynamics and subgrid tracer physics is central to the method. Some DESI tracer populations require modelling haloes down to masses of order , making this separation particularly valuable for large mock ensembles.
Figure 2. Methodological structure of the HOLI mock framework. Solid arrows indicate the production workflow. WebON constructs the evolving, coarse-grained matter lightcone and its coherent velocity field. The spectral cosmic-web hierarchy supplies environmental information to HICOBIAN, which generates tracer number counts through an effective field-level bias model and stochastic sampling. Subgrid prescriptions assign tracer positions and velocities, including central and satellite populations where required. Survey selection then maps the intrinsic catalogue to an observed mock catalogue. Dashed arrows indicate validation of the matter backbone and calibration of the bias and subgrid components against high-fidelity references. The framework separates resolved matter evolution from the effective treatment of unresolved tracer physics and the application of observational selection.
Relation to existing mock methods. Particle-mesh (PM) and PM-like gravity calculations paired with halo-occupation recipes include COLA-HOD [54], GLAM-HOD [55], and FastPM-HOD [56]. Some use replicated boxes for survey-size lightcones; large-volume realisations can also avoid replication, but at a cost set by the chosen volume and mass/force resolution. Methods based on resolved subhaloes or high-resolution phase space, such as SHAMe [57, 58, 59] and HOMe [60], target information that a coarse mesh cannot supply without further modelling. Alternative approximate halo-identification schemes include PeakPATCH [38, 61, 62], PINOCCHIO [63, 64], halo-finding PThalos [65, 66], and HALOGEN [67]; resolution and high- performance remain important considerations [68, 69, 70, 71].
HOLI instead follows field-level approaches including PThalos [72], PATCHY [73, 74, 75], EZmocks [68, 76], BAM [77, 78, 79, 80], and HICOBIAN [43, 81, 82]. Here the gravity solver supplies the resolved density and nonlocal environment fields, while the tracer response is calibrated using reference catalogues. Such calibration allows fine-scale tracer sampling but cannot independently recover unresolved physical information. The framework builds on the COSMIC SIGNAL programme1 and the earlier COSMIC-BIRTH lightcone approach [83].
Hierarchical field-level bias. HICOBIAN [43, 81] uses the environmental classification described in § 3.1. Within each subset, a positive-definite density-response model (often with up to approximately six parameters) predicts expected tracer number counts, which a calibrated stochastic prescription then converts to a discrete catalogue. Parameters may be inferred by MCMC [84] or genetic optimisation [43, 81]. Its stochasticity and higher-order statistics must be validated against reference catalogues. Importantly, this effective tracer model does not require the raw ALPT matter power spectrum to reproduce the -body result at the same small-scale precision. Coloma-Nadal et al. 2024 [43] demonstrated better than 2% agreement for the power spectrum of calibrated halo catalogues up to using coarse ALPT fields (with a mesh cell size of approximately ) and a hierarchical cosmic-web classification, compared with a reference halo sample from the UNIT simulation. The precise accuracy and limiting wavenumber depend on the tracer, calibration sample, redshift, and summary statistic; this result should not be read as a universal guarantee for every tracer. Post-processing ridging provides a complementary way to improve short-range matter morphology and tracer positioning [46]. Further tracer-dependent calibration and subgrid applications are developed in companion studies (Forero-Sánchez et al. and Tang et al., in preparation), including tests in the approximate range –.
Subgrid positions and velocities. Field-level number counts are mapped to discrete positions using the particle distribution and interpolated displacements [85]. Short-range clustering is corrected either through local attractors and relocation, as in CosmoMIA [85], or via calibrated ridging [46]. Tracer peculiar velocities combine coherent (e)ALPT flows with density- and environment-dependent stochastic components constrained by redshift-space multipoles. Satellite prescriptions (e.g. NFW/HOD) can be added when required; none of these steps substitutes for resolved subhalo dynamics. Their tracer-dependent validation is discussed in companion work.
Tracer properties and observational selection. When needed, HOLI assigns properties such as luminosity, stellar mass, and halo-mass proxies using environment-dependent models, including HADRON [79, 86] or alternative prescriptions [87]. Clustering after property selection must be validated separately from the one-point property distribution. Finally, survey geometry, radial selection, masks, fibre assignment, redshift failures, and other observational effects are applied as survey-specific steps.
Calibration, applicability, and limitations
The pipeline is applied in three stages: (i) calibrate bias, stochasticity, subgrid positions, velocities, and properties in periodic boxes at selected redshifts using high-fidelity reference catalogues; (ii) test power spectra, multipoles, higher-order statistics, and configuration-space clustering; and (iii) deploy the calibrated models onto WebON lightcones with interpolated redshift-dependent parameters and survey selection. Separate tests of the lightcone backbone and the tracer model help to identify the source of discrepancies. For example, failures in coherent flows or cross-correlations point towards the gravity backbone, whereas incorrect small-scale redshift-space multipoles may indicate subgrid-velocity or relocation prescriptions.
The resolved quantity is the Mpc-scale, phase-coherent dark-matter field, not the detailed internal structure of individual haloes. The mesh cutoff limits directly predicted small-scale information; halo exclusion, close pairs, satellite offsets, virial motions, and shot-noise or non-Poisson stochasticity must be modelled phenomenologically and checked against references. The framework is appropriate for large-volume clustering statistics but does not by itself predict merger trees, internal profiles, baryonic feedback, or detailed satellite dynamics. Calibration outside the reference cosmology, tracer selection, or mesh resolution requires new tests. Snapshot spacing, observer placement, and lightcone crossing accuracy are discussed in § 2.4.
Numerical Consistency Tests of the WebON Lightcones
We test the internal consistency of the matter-lightcone construction and its cosmic-web representation. The absolute accuracy of the underlying approximate matter dynamics is a distinct question, already assessed for post-processed ridged LPT fields against high-fidelity Abacus -body simulations [46]; the accuracy of effective halo clustering from coarse ALPT fields has likewise been quantified for HICOBIAN [43]. These external benchmarks are complementary to the present lightcone tests, and should not be conflated with them.
Matter and cosmic-web evolution
Figure 3 shows representative slices through the two WebON configurations considered in this work. The large-volume configuration demonstrates the ability to construct a DESI-scale full-sky lightcone without box replication, whereas the higher-resolution configuration resolves finer filamentary and knot structure.

Figure 3. Slices through periodic volumes containing full-sky WebON lightcones with the observer at the centre, illustrating the construction described in § 2. Top: ALPT lightcone in a volume , with cell size , as used for DESI mock generation. Bottom: eALPT lightcone in a volume , with cell size .
The continuous-redshift correction in Eq. (5) is designed to prevent discontinuities at the boundaries of the stored displacement intervals. We test this by inspecting the evolution of the density field and its angular statistics in consecutive redshift shells. The angular-clustering comparison in Figure 6 complements these visual checks by testing the projected clustering amplitude in consecutive shells. Direct radial boundary checks and snapshot-spacing convergence provide additional tests of continuity.
Figure 6. Internal angular-clustering consistency test for WebON. The plotted ratios compare the angular power spectra of continuously evolving WebON lightcone shells with those of corresponding shells extracted from fixed-redshift WebON-JAX boxes. Both use the same ALPT gravity approximation, observer position, and radial selection. The shell centres are and . In the upper panel, coloured solid (or coloured dashed/dash-dotted) curves denote the evolving lightcone spectra at the labelled redshifts, while black dotted curves denote their respective fixed-redshift references. The lower panel shows the corresponding ratio ; the dark- and light-grey bands mark and about unity, respectively. The plotted ratios show percent-level consistency, with a few multipoles approaching or marginally exceeding the band. This establishes internal lightcone consistency; external matter and tracer accuracy benchmarks are given in Kitaura & Sinigaglia 2026 [46] and Coloma-Nadal et al. 2024 [43], respectively.
Evolution of the spectral cosmic web. Figure 4 and Figure 5 show the potential/tidal and curvature levels of the spectral hierarchy, respectively. The same lightcone density realisation is used at each level, allowing the long-range tidal morphology and the more local ridge and curvature structure to be followed continuously across redshift.
These maps illustrate the phase-coherent construction of the evolving cosmic web from a common realisation, rather than from independently generated fields in disconnected redshift shells. Their visual continuity is a morphological diagnostic; a numerical accuracy claim additionally requires comparison with reference fields. Quantitative tests of the usefulness of these fields for tracer bias are presented in the companion HOLI/HICOBIAN analyses.
Angular clustering
We quantify the internal consistency of lightcone evolution using angular power spectra measured in redshift shells. Figure 6 compares the WebON lightcone measurements with those obtained from fixed-redshift boxes computed with WebON-JAX, using the same ALPT approximation. We consider snapshots at , , , , , , , and . For each snapshot redshift, we compare the angular clustering in a shell centred on that redshift within the lightcone volume with the corresponding shell extracted from the fixed-redshift box, using the same observer position and radial selection. This comparison tests whether the continuously evolving lightcone reproduces the clustering of the snapshot calculation at the corresponding epoch, subject to the evolution across the finite redshift width of each shell.
Across the redshift and multipole ranges shown, the measured angular clustering agrees with the fixed-redshift calculation at the percent level. Since both calculations use the same ALPT gravity approximation, this is an internal consistency test of the lightcone construction, not an independent validation of the absolute matter-clustering amplitude or shape. The comparison is nevertheless important for the tracer-bias strategy: parameters calibrated at fixed-redshift snapshots can be interpolated and applied to the corresponding evolving ALPT lightcone fields, which may subsequently be processed with ridging and hierarchical web-conditioned bias. The latter operations can improve small-scale matter morphology and reproduce calibrated tracer clustering beyond the mesh resolution, respectively; they do not retroactively validate the raw ALPT matter spectrum. Independent accuracy tests already exist: the companion ridged-LPT study compares matter power spectra and field-level cross-correlations with Abacus -body simulations [46], while Coloma-Nadal et al. 2024 [43] demonstrate better than 2% agreement in the power spectrum of calibrated halo samples up to using coarse ALPT fields and HICOBIAN. Ongoing companion analyses extend this calibration to additional tracers and subgrid prescriptions (Forero-Sánchez et al. and Tang et al., in preparation). Thus, Figure 6 addresses the specific remaining question of consistency between lightcone and snapshot implementations rather than duplicating those external benchmarks.
General-relativistic position correction
Figure 7 shows the ratio of the uncorrected matter power spectrum to that obtained after applying the position correction in Eq. (17). The curves span and : the highest redshifts are controlled tests of the operator, rather than the redshift range of the DESI lightcones. The ratio falls below unity at low and approaches unity towards higher , with a larger departure at higher redshift.
The sign follows directly from the displacement convention. At linear order, , so the added displacement gives
and hence the expected large-scale power-spectrum ratio is
Thus, the ratio below unity corresponds to an enhancement of the corrected density power, not a suppression caused by replacing the force kernel. The plotted trends are consistent with this prediction. A quantitative verification of the amplitude requires comparison with Eq. (35) for the same cosmology and redshifts; the figure alone does not establish a numerical error tolerance. This test concerns the approximate coordinate transformation, rather than a complete relativistic observable on the lightcone.
Local primordial non-Gaussianity
We test whether our framework recovers the characteristic large-scale bias induced by local primordial non-Gaussianity [51]. In this model, coupling between long-wavelength potential fluctuations and short-wavelength density fluctuations produces a scale-dependent tracer response,
where is the matter transfer function and is the linear growth factor. Since as , the correction approaches the characteristic dependence.
We have implemented local primordial non-Gaussianity directly in the initial conditions of WebON, allowing ALPT dark-matter fields to be generated for different values of . Figure 8 presents a controlled test at , using ten realisations on a mesh in a box of side length . For a power-law tracer-bias prescription with exponent , the bias difference relative to the Gaussian case recovers the expected large-scale enhancement or suppression. Its amplitude varies approximately linearly with over the range tested: the upper panel of Figure 8 displays the scale dependence, and the lower panel summarises the fitted amplitude. The fit tests the asymptotic shape; agreement with the full prediction in Eq. (21) additionally requires the transfer function and a calibrated tracer response . In particular, the illustrative mapping does not by itself impose the universal halo relation for .
The same leading large-scale signature can also be represented within our environmental bias framework through the nonlocal tensor introduced in Eq. (24), here written explicitly in real and Fourier space,
Although the scalar field entering the Hessian carries a weighting, the two spatial derivatives yield a tensor with an overall dependence. In particular, , which provides a potential-like environmental variable. We classify regions using the eigenvalues of and assign different bias weights to the resulting environments. Suitable choices of these weights reproduce the leading large-scale response, providing an effective environmental representation of the primordial non-Gaussian bias signal.
The PNG initial-condition test in Figure 8 and the complementary environmental construction described above address the same leading bias signature through different routes. The environmental construction can capture the characteristic scale dependence and its amplitude response, as tested in the companion analysis; the figure shown here specifically concerns the ALPT initial-condition test. Equivalence to non-Gaussian initial conditions beyond this bias statistic, including higher-order correlations and tracer abundances, requires separate validation.
Scope of the validation. The tests above assess the construction and redshift evolution of the lightcone matter and web fields, together with controlled checks of the optional GR and PNG modules. They are complemented by the independent Abacus matter-field benchmark of ridged LPT [46] and the published calibration of hierarchical halo bias on coarse ALPT fields [43]. They do not, by themselves, validate every tracer population or observable in the final HOLI mocks: tracer-dependent redshift-space, bias spectrum, stochasticity, exclusion, and property-selected statistics require their own tests (Forero-Sánchez et al. and Tang et al., in preparation).
Conclusions
We have presented WebON, a fast method for mapping the evolving dark-matter cosmic web directly onto the observer’s past lightcone, and described its role as the gravity backbone of the HOLI mock strategy. WebON assigns particles an emission redshift using a Zel’dovich estimate of their Eulerian distance and evaluates their displacements through a continuous-redshift correction to a limited set of stored approximate-gravity fields. This avoids both the replication of smaller periodic boxes and the stitching of independently evolved snapshot shells. The method supports regularised ALPT and eALPT displacement fields, with an optional ridging completion for enhanced short-range morphology.
We have illustrated the coherent evolution of matter and cosmic-web fields across the lightcone. The lightcone maps (Figure 3), spectral web fields (Figure 4 and Figure 5), and angular-clustering measurements (Figure 6) provide complementary tests of the internal consistency of the WebON construction. Since the angular-clustering reference uses the same approximate gravity model, these tests establish the internal consistency of lightcone evolution, not the accuracy of the raw ALPT matter spectrum. Independent Abacus comparisons for ridged LPT [46] and the published percent-level accuracy of halo power spectra recovered through HICOBIAN from coarse ALPT fields [43] already address different components of the accuracy question. Optional ultra-large-scale modules include an approximate relativistic position correction and initial conditions with local primordial non-Gaussianity. The GR test (Figure 7) exhibits the expected infrared enhancement of the corrected density field, while the PNG test (Figure 8) recovers the characteristic Dalal et al. scale-dependent bias and its approximately linear response to . Future studies will follow this PNG response continuously along the lightcone, including its interplay with evolving tracer bias, selection, and relativistic corrections.
The HOLI strategy uses the spectral hierarchy of the cosmic web as the interface between the resolved matter lightcone and the unresolved tracer-formation model. Crucially, the approximate ALPT lightcone fields can undergo post-processing ridging and then be populated using calibrated hierarchical field-level bias, stochastic sampling, and subgrid phase-space prescriptions. This modular calibration allows accurate tracer clustering even where the raw matter solver lacks comparable small-scale power. Existing work establishes better than 2% halo power-spectrum accuracy up to for one calibrated HICOBIAN configuration [43]; the exact performance is tracer and calibration dependent. Companion studies extend these prescriptions to further tracer populations and statistics (Forero-Sánchez et al. and Tang et al., in preparation).
This separation of responsibilities makes WebON a reusable lightcone backbone: the same phase-coherent matter and web realisations can support different tracer calibrations and analysis requirements without regenerating the underlying lightcone.
Building on its application to DESI, we intend to extend the HOLI mock programme to additional spectroscopic surveys, including Euclid, the Subaru Prime Focus Spectrograph (PFS), and the MUltiplexed Survey Telescope (MUST), among others [88, 89, 90, 91]. The modular framework allows the matter-lightcone construction to be combined with tracer-specific bias calibrations, subgrid phase-space prescriptions, and survey-dependent selection functions. Our aim is to provide large ensembles of mock catalogues for covariance estimation, validation of cosmological inference, and forward modelling of observational systematics across different tracer populations and redshift ranges. Where survey volumes overlap, populations generated from common matter realisations would also enable consistent tests of cross-correlations and joint analyses. These extensions will require dedicated calibration and validation for the target populations, observables, and selection procedures of each survey.
Acknowledgements
FSK acknowledges the Instituto de Astrofísica de Canarias (IAC) for continuous support to the Cosmology with LSS probes activities and the Spanish Ministry of Innovation and Science / Agencia Estatal de Investigación for support of the project Big Data of the Cosmic Web (PID2020-120612GB-I00/AEI/10.13039/501100011033), under which this work has been conceived and carried out and the FIRE (Field-level bayesian Inference to Reconstruct the univErse) project, which has been recently funded by a Proyecto de Generación de Conocimiento 2024, PID2024-160504NB-I00. FS acknowledges support from the Institute for Fundamental Physics of the Universe postdoctoral fellowship scheme. FS is also grateful to IAC for hospitality during part of the realization of this project. KN acknowledges support from JSPS KAKENHI grants 24H00002, 24H00241, JP25K01032, and the International Leading Research (ILR) project, JP22K21349. KN also acknowledges support from the Kavli IPMU, the World Premier Research Center Initiative (WPI), UTIAS, and the University of Tokyo. The authors thank Arnaud De Mattia for providing the JAX version of the WebON code. The authors acknowledge Light Bridges, S.L., in collaboration with Bechtle S.L. and the b-HAIS Center of Excellence in Tenerife, Canary Islands (Spain), for providing access to Indefeasible Computer Rights (ICR-DEMO 2025–2026) supporting the development and testing of WebON and BRIDGE codes.
Disclaimer
The WebON code used in this work has been mainly written by FSK in C++ and was coded without using AI.
WebON is a modular framework whose methodological components are presented across three companion papers: the present work describing the lightcone evolution mode within the HOLI pipeline to produce the DESI covariance mocks used for the DR2 Key Projects (see: www.cosmic-signal.org); a paper on ridged Lagrangian perturbation theory [46]; a dedicated paper on the spectral hierarchical cosmic-web [44]. WebON has already been used in three previous publications: one presenting the Hierarchical cosmic web and assembly bias [43] approach for effective field-level bias modelling exploiting the hierarchical cosmic web and levels; one presenting Cosmomia: cosmic-web based redshift-space halo distribution [85] for subgrid modelling exploiting the knots level as attractors; and Fast and accurate Gaia-unWISE quasar mock catalogs from LPT and Eulerian bias [82], using the two-hundred Gpc side cubical volume simulations performed with the lightcone evolution WebON mode on the Leonardo@CINECA pre-exascale supercomputing facilities in September 2023 through the INAF—C9A09 HPC proposal (637k core hrs). It has served as a reference for its JAX differentiable version in Differentiable Fuzzy Cosmic-Web for Field Level Inference [53], in particular the ridged n-LPT lightcone version. The JAX version of the WebON code used within DESI was developed by Arnaud De Mattia based on its C++ version.
Data availability. Data products generated in this work (intermediate lightcone fields and mock catalogues) are available from the corresponding author upon reasonable request.
Code availability. The WebON and HOLI pipeline components used in this analysis are available upon reasonable request, subject to DESI collaboration policies.
Affiliations
¹ Instituto de Astrofísica de Canarias, Vía Láctea s/n, E-38205 La Laguna, Tenerife, Spain
² Departamento de Astrofísica, Universidad de La Laguna, E-38206 La Laguna, Tenerife, Spain
³ Institute for Fundamental Physics of the Universe, Via Beirut 2, I-34151 Trieste, Italy
⁴ SISSA – International School for Advanced Studies, Via Bonomea 265, 34136 Trieste, Italy
⁵ INAF – Osservatorio Astronomico di Trieste, Via G. B. Tiepolo 11, I-34131 Trieste, Italy
⁶ INFN – National Institute for Nuclear Physics, Via Valerio 2, I-34127 Trieste, Italy
⁷ Institut de Ciències del Cosmos (ICCUB), Universitat de Barcelona (UB), c. Martí i Franquès 1, E-08028 Barcelona, Spain
⁸ High Energy Physics Division, Argonne National Laboratory, Lemont, IL 60439, USA
⁹ Observatorio Astronómico Nacional, Universidad Nacional de Colombia, Av. Carrera 30 No. 45-03, 111321, Bogotá, Colombia
¹⁰ Department of Astronomy, Tsinghua University, Beijing 100084, China
¹¹ Institute of Space Sciences (ICE, CSIC), Campus UAB, Carrer de Can Magrans, s/n, 08193 Barcelona, Spain
¹² Theoretical Astrophysics, Department of Earth and Space Science, Graduate School of Science, The University of Osaka, 1-1 Machikaneyama, Toyonaka, Osaka 560-0043, Japan
¹³ Theoretical Joint Research, Forefront Research Center, The University of Osaka, Toyonaka, Osaka 560-0043, Japan
¹⁴ Kavli IPMU (WPI), UTIAS, The University of Tokyo, Kashiwa, Chiba 277-8583, Japan
¹⁵ Department of Physics and Astronomy, University of Nevada, Las Vegas, 4505 S. Maryland Pkwy, Las Vegas, NV 89154-4002, USA
¹⁶ Nevada Center for Astrophysics, University of Nevada, Las Vegas, 4505 S. Maryland Pkwy, Las Vegas, NV 89154-4002, USA
References
- [2]R. Génova-Santos, F. Atrio-Barandela, F.S. Kitaura and J.P. Mücket, Constraining the Baryon Fraction in the Warm Hot Intergalactic Medium at Low Redshifts with Planck Data, ApJ 806 (2015) 113 [1501.01445].
- [3]D. Eckert, M. Jauzac, H. Shan, J.-P. Kneib, T. Erben, H. Israel et al., Warm-hot baryons comprise 5-10 per cent of filaments in the cosmic web, Nature 528 (2015) 105 [1512.00454].DOI
- [4]A. de Graaff, Y.-C. Cai, C. Heymans and J.A. Peacock, Probing the missing baryons with the Sunyaev-Zel’dovich effect from filaments, A&A 624 (2019) A48 [1709.10378].
- [5]F.-S. Kitaura, C.-H. Chuang, Y. Liang, C. Zhao, C. Tao, S. Rodríguez-Torres et al., Signatures of the Primordial Universe from Its Emptiness: Measurement of Baryon Acoustic Oscillations from Minima of the Density Field, Phys. Rev. Lett. 116 (2016) 171301 [1511.04405].DOI
- [6]Y. Liang, C. Zhao, C.-H. Chuang, F.-S. Kitaura and C. Tao, Measuring baryon acoustic oscillations from the clustering of voids, MNRAS 459 (2016) 4020 [1511.04391].DOI
- [7]C. Zhao, C.-H. Chuang, F.-S. Kitaura, Y. Liang, M. Pellejero-Ibanez, C. Tao et al., Improving baryon acoustic oscillation measurement with the combination of cosmic voids and galaxies, MNRAS 491 (2020) 4554 [1802.03990].DOI
- [8]C.-H. Chuang, F.-S. Kitaura, Y. Liang, A. Font-Ribera, C. Zhao, P. McDonald et al., Linear redshift space distortions for cosmic voids based on galaxies in redshift space, Phys. Rev. D 95 (2017) 063528 [1605.05352].DOI
- [9]S. Nadathur, P. Carter and W.J. Percival, A Zel’dovich reconstruction method for measuring redshift space distortions using cosmic voids, Monthly Notices of the Royal Astronomical Society 482 (2018) 2459 [https://academic.oup.com/mnras/article-pdf/482/2/2459/26576217/sty2799.pdf].DOI
- [10]D. Park and J. Lee, Void Ellipticity Distribution as a Probe of Cosmology, Phys. Rev. Lett. 98 (2007) 081301 [astro-ph/0610520].pubmed.ncbi.nlm.nih.gov/17359084
- [11]G. Lavaux and B.D. Wandelt, Precision cosmology with voids: definition, methods, dynamics, MNRAS 403 (2010) 1392 [0906.4101].DOI
- [12]E.G.P. Bos, R. van de Weygaert, K. Dolag and V. Pettorino, The darkness that shaped the void: dark energy and cosmic voids, MNRAS 426 (2012) 440 [1205.4238].
- [13]A. Pisani, P.M. Sutter, N. Hamaus, E. Alizadeh, R. Biswas, B.D. Wandelt et al., Counting voids to probe dark energy, Phys. Rev. D 92 (2015) 083531 [1503.07690].DOI
- [14]A. Kovács, C. Sánchez, J. García-Bellido, J. Elvin-Poole, N. Hamaus, V. Miranda et al., More out of less: an excess integrated Sachs-Wolfe signal from supervoids mapped out by the Dark Energy Survey, MNRAS 484 (2019) 5267 [1811.07812].
- [35]N.I. Libeskind, R. van de Weygaert, M. Cautun, B. Falck, E. Tempel, T. Abel et al., Tracing the cosmic web, MNRAS 473 (2018) 1195 [1705.03021].DOI
- [38]J.R. Bond, L. Kofman and D. Pogosyan, How filaments of galaxies are woven into the cosmic web, Nature 380 (1996) 603 [astro-ph/9512141].DOI
- [40]V. Desjacques, D. Jeong and F. Schmidt, Large-scale galaxy bias, Phys. Rep. 733 (2018) 1 [1611.09787].
- [41]P. McDonald and A. Roy, Clustering of dark matter tracers: generalizing bias for the coming era of precision LSS, J. Cosmology Astropart. Phys. 2009 (2009) 020 [0902.0991].DOI
- [43]J.M. Coloma-Nadal, F.S. Kitaura, J.E. García-Farieta, F. Sinigaglia, G. Favole and D. Forero Sánchez, The Hierarchical Cosmic Web and Assembly Bias, arXiv e-prints (2024) arXiv:2403.19337 [2403.19337].
- [44]F.-S. Kitaura and F. Sinigaglia, Spectral Hierarchy of the Cosmic Web, arXiv e-prints (2026) arXiv:2603.15834 [2603.15834].arxiv.org/abs/2603.15834
- [45]J.E. García-Farieta, A. Balaguera-Antolínez and F.-S. Kitaura, Fast simulation mapping: From standard to modified gravity cosmologies using the bias assignment method, A&A 690 (2024) A27 [2405.10319].
- [46]F.-S. Kitaura and F. Sinigaglia, Ridged Lagrangian Perturbation Theory (RLPT), arXiv e-prints (2026) arXiv:2603.13106 [2603.13106].arxiv.org/abs/2603.13106
- [47]F.-S. Kitaura and S. Heß, Cosmological structure formation with augmented lagrangian perturbation theory, Monthly Notices of the Royal Astronomical Society: Letters 435 (2013) L78.DOI
- [48]F.S. Kitaura, F. Sinigaglia, A. Balaguera-Antolínez and G. Favole, The cosmic web from perturbation theory, A&A 683 (2024) A215 [2301.03648].arxiv.org/abs/2301.03648
- [49]T. Abel, O. Hahn and R. Kaehler, Tracing the dark matter sheet in phase space, Monthly Notices of the Royal Astronomical Society 427 (2012) 61 [1111.3944].DOI
- [50]O. Hahn and A. Paranjape, General relativistic screening in cosmological simulations, Phys. Rev. D 94 (2016) 083511 [1602.07699].DOI
- [51]N. Dalal, M. White, J.R. Bond and A. Shirokov, Halo Assembly Bias in Hierarchical Structure Formation, ApJ 687 (2008) 12 [0803.3453].
- [52]K. Peraza Vera, F.-S. Kitaura and F. Sinigaglia, Primordial non-Gaussianity as a large-scale cosmic-web bias, arXiv e-prints (2026) arXiv:2611.09362 [2611.09362].arxiv.org/abs/2611.09362
- [53]P. Rosselló, F.-S. Kitaura, D. Forero Sánchez, F. Sinigaglia and G. Favole, Differentiable fuzzy cosmic web for field-level inference, A&A 709 (2026) A110 [2506.03969].DOI
- [54]A. Izard, M. Crocce and P. Fosalba, ICE-COLA: towards fast and accurate synthetic galaxy catalogues optimizing a quasi-N-body method, MNRAS 459 (2016) 2327 [1509.04685].DOI
- [55]J. Freza, F. Prada, A. Klypin, T. Ishiyama, A. Smith, C.M. Baugh et al., The Uchuu-GLAM BOSS and eBOSS LRG lightcones: Exploring clustering and covariance errors, arXiv e-prints (2023) arXiv:2311.14456 [2311.14456].
- [56]A. Variu, S. Alam, C. Zhao, C.-H. Chuang, Y. Yu, D. Forero-Sánchez et al., DESI mock challenge: constructing DESI galaxy catalogues based on FASTPM simulations, MNRAS 527 (2024) 11539 [2307.14197].
- [57]S. Contreras, R.E. Angulo and M. Zennaro, A flexible modelling of galaxy assembly bias, MNRAS 504 (2021) 5205 [2005.03672].DOI
- [58]S. Contreras, J. Chaves-Montero and R.E. Angulo, Consistent clustering and lensing of SDSS-III BOSS galaxies with an extended abundance matching formalism, MNRAS 525 (2023) 3149 [2305.09637].arxiv.org/abs/2305.09637
- [59]S. Ortega-Martinez, S. Contreras and R. Angulo, SHAMe-SF: Predicting the clustering of star-forming galaxies with an enhanced abundance matching model, A&A 689 (2024) A66 [2401.17374].
- [60]G. Favole, F.-S. Kitaura, B. Hadzhijska, D. Eisenstein, L.H. Garrison and S. Bose, ELG×LRG Distribution through Dark Matter Halo Dynamics, ApJ 1002 (2026) 90 [2512.04362].
- [61]J.R. Bond and S.T. Myers, The Peak-Patch Picture of Cosmic Catalogs. II. Validation, ApJS 103 (1996) 41.DOI
- [62]J.R. Bond and S.T. Myers, The Peak-Patch Picture of Cosmic Catalogs. III. Application to Clusters, ApJS 103 (1996) 63.DOI
- [63]P. Monaco, T. Theuns, G. Taffoni, F. Governato, T. Quinn and J. Stadel, Predicting the number, spatial distribution, and merging history of dark matter halos, The Astrophysical Journal 564 (2002) 8.DOI
- [64]P. Monaco, E. Sefusatti, S. Borgani, M. Crocce, P. Fosalba, R.K. Sheth et al., An accurate tool for the fast generation of dark matter halo catalogues, MNRAS 433 (2013) 2389 [1305.1505].DOI
- [65]M. Manera, R. Scoccimarro, W.J. Percival, L. Samushia, C.K. McBride, A.J. Ross et al., The clustering of galaxies in the SDSS-III Baryon Oscillation Spectroscopic Survey: a large sample of mock galaxy catalogues, MNRAS 428 (2013) 1036 [1203.6609].DOI
- [66]M. Manera, L. Samushia, R. Tojeiro, C. Howlett, A.J. Ross, W.J. Percival et al., The clustering of galaxies in the SDSS-III Baryon Oscillation Spectroscopic Survey: mock galaxy catalogues for the low-redshift sample, MNRAS 447 (2015) 437 [1401.4171].DOI
- [67]S. Avila, S.G. Murray, A. Knebe, C. Power, A.S.G. Robotham and J. Garcia-Bellido, HALOGEN: A tool for fast generation of mock halo catalogues, Mon. Not. Roy. Astron. Soc. 450 (2015) 1856 [1412.5228].DOI
- [68]C.-H. Chuang, C. Zhao, F. Prada, E. Munari, S. Avila, A. Izard et al., nIFTy cosmology: Galaxy/halo mock catalogue comparison project on clustering statistics, MNRAS 452 (2015) 686 [1412.7729].DOI
- [69]L. Blot, M. Crocce, E. Sefusatti, M. Lippich, A.G. Sánchez, M. Colavincenzo et al., Comparing approximate methods for mock catalogues and covariance matrices II: power spectrum multipoles, MNRAS 485 (2019) 2806 [1806.09497].DOI
- [70]M. Colavincenzo, E. Sefusatti, P. Monaco, L. Blot, M. Crocce, M. Lippich et al., Comparing approximate methods for mock catalogues and covariance matrices - III: bispectrum, MNRAS 482 (2019) 4883 [1806.09499].DOI
- [71]M. Lippich, A.G. Sánchez, M. Colavincenzo, E. Sefusatti, P. Monaco, L. Blot et al., Comparing approximate methods for mock catalogues and covariance matrices - I. Correlation function, MNRAS 482 (2019) 1786 [1806.09477].DOI
- [72]R. Scoccimarro and R.K. Sheth, PTHALOS: a fast method for generating mock galaxy distributions, MNRAS 329 (2002) 629 [astro-ph/0106120].DOI
- [73]F.-S. Kitaura, G. Yepes and F. Prada, Modelling baryon acoustic oscillations with perturbation theory and stochastic halo biasing, Monthly Notices of the Royal Astronomical Society: Letters 439 (2013) L21 [https://academic.oup.com/mnrasl/article-pdf/439/1/L21/3421996/slt172.pdf].DOI
- [74]F.-S. Kitaura, H. Gil-Marín, C.G. Scóccola, C.-H. Chuang, V. Müller, G. Yepes et al., Constraining the halo bispectrum in real and redshift space from perturbation theory and non-linear stochastic bias, MNRAS 450 (2015) 1836 [1407.1236].DOI
- [75]F.-S. Kitaura, S. Rodríguez-Torres, C.-H. Chuang, C. Zhao, F. Prada, H. Gil-Marín et al., The clustering of galaxies in the SDSS-III Baryon Oscillation Spectroscopic Survey: mock galaxy catalogues for the BOSS Final Data Release, MNRAS 456 (2016) 4156 [1509.06400].DOI
- [76]C. Zhao, C.-H. Chuang, J. Bautista, A. de Mattia, A. Raichoor, A.J. Ross et al., The completed SDSS-IV extended Baryon Oscillation Spectroscopic Survey: 1000 multi-tracer mock catalogues with redshift evolution and systematics for galaxies and quasars of the final data release, MNRAS 503 (2021) 1149 [2007.08997].DOI
- [77]A. Balaguera-Antolínez, F.-S. Kitaura, M. Pellejero-Ibáñez, C. Zhao and T. Abel, BAM: bias assignment method to generate mock catalogues, Monthly Notices of the Royal Astronomical Society: Letters 483 (2018) L58 [https://academic.oup.com/mnrasl/article-pdf/483/1/L58/54700852/mnrasl_483_1_L58.pdf].DOI
- [78]A. Balaguera-Antolínez, F.-S. Kitaura, M. Pellejero-Ibáñez, M. Lippich, C. Zhao, A.G. Sánchez et al., One simulation to have them all: performance of the Bias Assignment Method against N-body simulations, MNRAS 491 (2020) 2565 [1906.06109].DOI
- [79]A. Balaguera-Antolínez, F.-S. Kitaura, S. Alam, C.-H. Chuang, Y. Yu, G. Favole et al., DESI mock challenge. Halo and galaxy catalogues with the bias assignment method, A&A 673 (2023) A130 [2211.10640].arxiv.org/abs/2211.10640
- [80]F.S. Kitaura, A. Balaguera-Antolínez, F. Sinigaglia and M. Pellejero-Ibáñez, The cosmic web connection to the dark matter halo distribution through gravity, MNRAS 512 (2022) 2245 [2005.11598].DOI
- [81]F. Sinigaglia, F.S. Kitaura, K. Nagamine, Y. Oku and A. Balaguera-Antolínez, Lyman-α forest modeling in redshift space via augmented nonlocal Fluctuating Gunn-Peterson Approximation, A&A 682 (2024) A21 [2305.10428].DOI
- [82]F. Sinigaglia, F.-S. Kitaura, M. Shiferaw, G. Favole, K. Storey-Fisher and N. Arsenov, Fast and accurate Gaia-unWISE quasar mock catalogs from LPT and Eulerian bias, J. Cosmology Astropart. Phys. 2026 (2026) 037 [2509.15890].arxiv.org/abs/2509.15890
- [83]F.-S. Kitaura, M. Ata, S.A. Rodríguez-Torres, M. Hernández-Sánchez, A. Balaguera-Antolínez and G. Yepes, COSMIC BIRTH: efficient Bayesian inference of the evolving cosmic web from galaxy surveys, MNRAS 502 (2021) 3456 [1911.00284].DOI
- [84]M. Vakili, F.-S. Kitaura, Y. Feng, G. Yepes, C. Zhao, C.-H. Chuang et al., Accurate halo-galaxy mocks from automatic bias estimation and particle mesh gravity solvers, MNRAS 472 (2017) 4144 [1701.03765].DOI
- [85]D. Forero-Sánchez, F.-S. Kitaura, F. Sinigaglia, J. María Coloma-Nodal and J.-P. Kneib, CosmoMIA: Cosmic Web-based redshift space halo distribution, arXiv e-prints (2024) arXiv:2402.17581 [2402.17581].
- [86]C. Zhao, F.-S. Kitaura, C.-H. Chuang, F. Prada, G. Yepes and C. Tao, Halo mass distribution reconstruction across the cosmic web, Monthly Notices of the Royal Astronomical Society 451 (2015) 4266 [https://academic.oup.com/mnras/article-pdf/451/4/4266/3901283/stv1262.pdf].arxiv.org/abs/1501.05520
- [87]S. Ramakrishnan, A. Paranjape and R.K. Sheth, Mock halo catalogues: assigning unresolved halo properties using correlations with local halo environment, MNRAS 503 (2021) 2053 [2012.10170].DOI
- [88]DESI Collaboration, A. Aghamousa et al., The DESI experiment part I: Science, targeting, and survey design, arXiv e-prints (2016) [1611.00036].
- [89]Euclid Collaboration, Y. Mellier et al., Euclid. I. overview of the Euclid mission, Astronomy & Astrophysics 697 (2025) A1 [2405.13491].
- [90]M. Takada, R.S. Ellis, M. Chiba et al., Extragalactic science, cosmology, and galactic archaeology with the Subaru Prime Focus Spectrograph, Publications of the Astronomical Society of Japan 66 (2014) R1 [1206.0737].DOI
- [91]C. Zhao, S. Huang, M. He et al., Multiplexed Survey Telescope (MUST) science white paper I: Overview of large-scale structure cosmology in the era of Stage-V spectroscopic surveys, Science China Physics, Mechanics & Astronomy 69 (2026) 119511 [2411.07970].arxiv.org/abs/2411.07970





