WorksPhysics and Astronomy
Geometric and electronic properties of two kinds of CrO2 magnetic monolayers: D3d and D2h phases
Abstract
Due to the high magnetic coupling strength between the Cr elements, the bulk phase CrO2 is one of several ferromagnetic oxides known to have the highest Curie temperature. When the dimensionality of the material is reduced from 3D to 2D, the 2D CrO2 system material is expected to maintain a high Curie temperature. In this work, we predict two new phases of CrO2 monolayer (D3d and D2h) by using first-principles calculations. We have found that the Curie temperature of 2D CrO2 is much lower than that of its bulk phase, but still remains as high as 191K, which is comparable to that of Fe2Cr2Ge6. In addition, 1L D3d-CrO2 is in the ferromagnetic state, while 1L D2h-CrO2 is in the antiferromagnetic state. Also, the different geometric structure affects its electrical properties: the 1L D3d-CrO2 is a half-metal while 1L D2h-CrO2 is a semiconductor. Our studies have shown that there is a wealth of electrical and magnetic properties in CrO2.
Introduction
Bulk CrO is one of several known ferromagnetic oxides, and is the ferromagnetic half-metal that has been experimentally confirmed[1][2][3][4]. It has a rutile structure with Cr ions forming a tetragonal centroid lattice. Cr has a closed shell Ar core and two additional 3d electrons. The Cr ions are in the center of the octahedra[5]. The saturation magnetization at 10 K was reported to be 1.92 μ per Cr site[6], which is close to the ideal value (2 μ) and is consistent with half-metallicity. It has a high Curie temperature, determined experimentally in the range of 385–400 K[7]. In a half-metallic ferromagnet, the conduction electrons should be completely spin polarized. This makes CrO a good candidate for use as a spin injector and has sparked the revival of CrO thin film growth techniques[7] including the original high-pressure, thermal decomposition method as well as a chemical vapor deposition (CVD) technique discovered in the late 1970s[8].
In the past two decades, with the discovery of graphene[9], the attention of two-dimensional materials has gradually increased. Two dimensional materials have more advantages in spin electronic devices because of their simple structure and easy magnetic control. In 2017, the first intrinsic ferromagnetic two-dimensional CrI and CrGeTe were successfully fabricated for the first time[10][11], bringing the study of ferromagnetism from 3D down to 2D. When materials are transformed from bulk into their two-dimensional (2D) forms, new physical phenomena may appear. Unfortunately, there are few reports on the 2D structure of CrO till now. The past studies on half-metal magnets mostly focused on the bulk systems. What necessary to develop low-dimensional half-metal materials is spintronic devices with the demand of small size and high capacity, especially two-dimensional (2D) nanosheets or monolayer materials due to the simple synthesis, ultra-thin thickness, and adjustable electronic structure[12].
In this work, we predicted two lowest-energy structures of CrO monolayer, namely 1L D-CrO and D-CrO[13][14]. They all have high geometric stability, while having significantly different electronic and magnetic properties. The D-CrO has the lowest energy, which is 178.16 meV / cell than that of D-CrO. The D-CrO is half-metal ferromagnetic while the D-CrO is an antiferromagnetic semiconductor. The both 1L -CrO and -CrO could be prepared by advanced chemical vapor deposition method[15][16].
Methods
Our first-principles calculations were based on density functional theory (DFT) implemented in the Vienna Ab initio Simulation Package (VASP)[17]. Generalized gradient approximation (GGA) for exchange-correlation functional given by Perdew-Burke-Ernzerhof (PBE)[18] was used. The effective Hubbard eV was added according to Dudarev’s method for the Cr- orbitals[19][20][21]. The projector augmented wave (PAW)[22] method was used to treat the core electrons. The plane wave cutoff energy was set to be 500 eV. The first Brillouin zone was sampled by using a -centered Monkhorst-Pack[23] grid for CrO and Monkhorst-Pack grid for CrO. The lattice geometries and atomic positions were fully relaxed until force and the energy were converged to 0.01 eV Å and eV, respectively. Van der Waals interaction (vdW) correlation is considered by using the semi-empirical dispersion-corrected density functional theory (DFT-D3) force-field approach[24]. A vacuum space of 20 Å along the direction was adopted to model the 2D system. The spin-orbit coupling (SOC) was included in the electronic self-consistent calculations. The phonon dispersion relations was calculated by employing the density-functional perturbation theory (DFPT) and PHONOPY[25]. The Monte Carlo simulation with Wolff algorithm based on classical Heisenberg model is used to describe the thermal dynamics of magnetism in equilibrium states[26][27]. All the renormalization group Monte Carlo algorithms were implemented in the open source project MCSOLVER[29].
Results and discussion
D3d CrO2 monolayer
We carefully check energy orders of ferromagnetic states (FM) and antiferromagnetic states (AFM) for the two phases of CrO. For CrO, the Cr supercells for ferromagnetic state and two antiferromagnetic states are considered to calculate the relative energy (Figure 1c). The relative energy for these magnetic states are 0, 44.166 and 71.085 meV / unit cell for supercells, respectively. The FM state has the lowest Energy. Therefore, the ground state of CrO is ferromagnetic.

Figure 1. (a) Structure of CrO with top, front and right view. (b) Electronic band structure and density of state of CrO. (c) The ferromagnetic state and two antiferromagnetic states of CrO in Cr supercells. Including their relative energy.
The structure of CrO monolayer with symmetry is shown in Figure 1a. For CrO, the equilibrium lattice constant a and b are 2.92 Å. A Cr atom is surrounded by six O atoms each of them bonded to three Cr atoms. The bond length between Cr and O atom is 1.94 Å. The total magnetic moment is 2 / unit cell. The majority of the total magnetic moment comes from the Cr atoms, while the O atoms have a small magnetic moment of only 0.18 . The magnetic calculations show that the monolayer behaves as a ferromagnetic half-metal, as shown in Figure 1b, which is provide a new possibility to implement the intrinsic half-metallicity without any artificial modification. The spin-up channels of CrO possess a very large band gap, whereas the spin-down ones do not show any gap. Electrons around the Fermi level are contributed by Cr- and O- orbitals. Therefore, the electronic structure has an intrinsic half-metallicity without any artificial modification.
Next, we explore the magnetic behavior under finite temperatures. Here we use the Heisenberg model to describe the magnetic behavior of these systems. The spin Hamiltonian can be written as
where is the exchange interaction parameter, S = 2/2 for Cr.
Here we considered one typical coupling channel for CrO (Figure 2a). In order to calculate the energy difference between AFM and FM more accurately, we used supercells to calculate the exchange coupling strength (Figure 2b). The energy difference was calculated to be 245.35 meV per supercell.

Figure 2. (a) One classic exchange strength shown in a Cr supercell. For simplicity, O atoms are removed. (b) The ferromagnetic state and antiferromagnetic state of CrO in Cr supercells. Including their relative energy. (c) MC simulations of of CrO monolayer.
According to equation 1, the energies arising from spin exchange for FM and AFM can be written as
The magnetic coupling was calculated to be 15.33 meV. Positive values represent FM exchange interactions. Therefore, the nearest neighbour exchange interaction is ferromagnetic.
Then by classical Metropolis MC simulations(Figure 2c), the of CrO is 191 K.
CrO monolayer
Then we discuss the CrO monolayer with symmetry. For CrO, the Cr supercells for ferromagnetic state and three antiferromagnetic states are considered to calculate the relative energy (Figure 3c). The relative energy for these magnetic states are 0, 557.82, 726.37 and 870.32 meV for supercells, respectively. The AFM1 state has the lowest Energy. Therefore, the ground state of CrO is antiferromagnetic.

Figure 3. (a) Structure of CrO with top, front and right view. Including three classic exchange strength , and . (b) Electronic band structure and density of state of CrO. (c) The ferromagnetic state and two antiferromagnetic states of CrO in Cr supercells. Including their relative energy.
The structure of this phase is shown in Figure 3a. For CrO, the equilibrium lattice constant and are 5.01 and 2.90 Å, respectively. In a CrO unit, there are two typical chemical bond lengths. Four bonds are 1.95 Å and the rest two are 1.93 Å. The magnetic calculations show that the monolayer behaves as an antiferromagnetic semiconductor, as shown in Figure 3b. CrO is semiconducting with sizable electronic energy gap (~1.00 eV). The edges of the valence bands are coming from the orbitals of Cr atoms and orbitals of O atoms, while the conduction band edges are mainly coming from Cr- orbitals and partly from the O- orbitals.
For CrO, the two Cr atoms have three typical coupling channels whose strengths are labelled as , and (Figure 3a). According to equation 1, the energies arising from spin exchange for FM, AFM1, AFM2 and AFM3 can be written as
The magnetic coupling exhibits an anisotropy since the obtained , and equal to -42.22, 10.21 and 0.52 meV. The nearest neighbour exchange interaction is antiferromagnetic, the second neighboring and the third neighboring exchange parameters are ferromagnetic.
Geometric Stability
To assess the tow phases of CrO is dynamically stable, we study its lattice dynamics by calculating the phonon dispersion. The result of is shown in Figure 4a. For monolayer CrO, the phonon branches is positive in the whole Brillouin zone, so the absence of imaginary mode in the entire Brillouin zone confirms that is dynamically stable. In Figure 4b we can find that one third of the spectral lines around are below 0, which is negative. But it is very likely to be stable, maybe because the structural accuracy is not optimized enough, which is also encountered in some other 2D materials, and further improving the optimized accuracy or adding a little tensile strain can eliminate this virtual frequency.
Figure 4. The phonon spectrum calculations for (a) and (b) CrO.
Conclusion
In summary, based on first-principles calculations, we predict two phases of monolayer ( and ). Our results indicate that the ground state of is FM with estimated of 191 K. And it is an intrinsic half-metal with 100 % spin polarization, which can be applied in high-quality magnetic recording medium. In contrast, the - is an antiferromagnetic semiconductor, which renders 2D sheet a very promising candidate for AFM spintronics in nanoscale. Our calculations suggest that the two phases of can provide a great platform for building spintronic devices and can stimulate relevant experiments.
References
- [1]Schwarz, CrO2 predicted as a half-metallic ferromagnet, 16 (1996) 211-216. DOI 10.1088/0305-4608/16/9/002
- [2]H. Y. Hwang, S. Cheong, Enhanced intergrain tunneling magnetoresistance in half-metallic CrO2 films, Science, 278 (1997) 1607-1609. DOI:10.1126/science.278.5343.1607DOI
- [3]Y. Ji, G.J. Strijkers, F.Y. Yang, C.L. Chien, J.M. Byers, A. Anguelouch, G. Xiao, A. Gupta, Determination of the spin polarization of half-metallic CrO2 by point contact Andreev reflection, Phys Rev Lett, 86 (2001) 5585-5588. DOI:10.1103/physrevlett.86.5585
- [4]I. I., Mazin, D. ., J., Singh, Claudia, Ambrosch-Draxl, Transport, optical, and electronic properties of the half-metal CrO2, Physical Review B,85 (1999) 6220-6222. DOI:10.1063/1.370227DOI
- [5]L. Chioncel, H. Allmaier, E. Arrigoni, A. Yamasaki, A.I. Lichtenstein, Half-Metallic Ferromagnetism and the spin polarization in CrO2, Physical review. B, Condensed matter, 75 (2007) 1418-1428. DOI:10.1103/PhysRevB.75.140406DOI
- [6]Y. Moritomo, R. Yamamoto, A. Nakamura, Electronic structure of half-metallic CrO2 as investigated by optical spectroscopy, Phys.rev.b, 61 (2000)5062-5064. DOI:10.1103/PhysRevB.61.R5062DOI
- [7]S.M. Watts, S. Wirth, S.V. Molnár, A. Barry, J. Coey, Evidence for two-band magnetotransport in half-metallic chromium dioxide, Physical Review B, 61 (2000) 9621-9628. DOI:10.1103/PhysRevB.61.9621DOI
- [8]S. Ishibashi, T. Namikawa, M. Satou, Epitaxial Growth of CrO2 on Sapphire in Air, Japanese Journal of Applied Physics, 17 (1978) 249-250. DOI:10.1143/JJAP.17.249/metaDOI
- [9]K.S. Novoselov, A.K. Geim, S.V. Morozov, D. Jiang, Y. Zhang, S.V. Dubonos, I.V. Grigorieva, A.A. Firsov, Electric field effect in atomically thin carbon films, Science, 306 (2004) 666-669. DOI:10.1126/science.1102896DOI
- [10]B. Huang, G. Clark, E. Navarro-Moratalla, D.R. Klein, R. Cheng, K.L. Seyler, D. Zhong, E. Schmidgall, M.A. McGuire, D.H. Cobden, W. Yao, D. Xiao, P. Jarillo-Herrero, X. Xu, Layer-dependent ferromagnetism in a van der Waals crystal down to the monolayer limit, Nature, 546 (2017) 270-273. https://www.nature.com/articles/nature22060DOI
- [11]C. Gong, L. Li, Z. Li, H. Ji, A. Stern, Y. Xia, T. Cao, W. Bao, C. Wang, Y. Wang, Z.Q. Qiu, R.J. Cava, S.G. Louie, J. Xia, X. Zhang, Discovery of intrinsic ferromagnetism in two-dimensional van der Waals crystals, Nature, 546 (2017) 265-269. https://www.nature.com/articles/nature22060
- [12]Y. Feng, X. Wu, J. Han, G. Gao, Robust half-metallic itinerant and perfect spin transport properties in 2D transition metal dichlorides, Journal of Materials Chemistry C, 6 (2018) 4087-4094. https://doi.org/10.1039/C8TC00443A
- [13]B. Zhang, J. Sun, J. Leng, C. Zhang, J. Wang, Tunable two dimensional ferromagnetic topological half-metal by electronic correction and spin direction, Applied Physics Letters, 117 (2020)224207 https://doi.org/10.1063/5.0031443
- [14]X. Deng, Z. Li, Intrinsic ultra-wide completely spin-polarized state realized in a new CrO2 monolayer, Physical Chemistry Chemical Physics, (2020)1-4. https://doi.org/10.1039/D0CP02627A
- [15]M. Xu, T. Liang, M. Shi, H. Chen, Graphene-like two-dimensional materials, Chem Rev, 113 (2013) 3766-3798. https://pubs.acs.org/doi/10.1021/cr300263aDOI
- [16]T. Gould, S. Lebègue, T. Björkman, J.F. Dobson, Chapter One - 2D Structures Beyond Graphene: The Brave New World of Layered Materials and How Computers Can Help Discover Them,Semiconductors and semimetals,95 (2016), 1-33. https://doi.org/10.1016/bs.semsem.2016.04.001
- [17]G. Kresse, J. Hafner, Ab initio molecular dynamics for liquid metals, Phys Rev B Condens Matter, 47 (1993) 558-561. https://doi.org/10.1016/0022-3093(95)00355-X
- [18]J.P. Perdew, K. Burke, M. Ernzerhof, Generalized Gradient Approximation Made Simple, Physical Review Letters, 77 (1996) 3865-3868. https://journals.aps.org/prl/abstract/10.1103/PhysRevLett.77.3865pubmed.ncbi.nlm.nih.gov/10062328
- [19]X. Li, J. Yang, CrXTe3(X = Si, Ge) nanosheets: two dimensional intrinsically ferromagnetic semiconductors, Journal of Materials Chemistry C, 2 (2014)7071-7076. https://doi.org/10.1039/C4TC01193G
- [20]B. Deng, X.Q. Shi, L. Chen, S.Y. Tong, Preserving half-metallic surface states in CrO2: Insights into surface reconstruction rules, Physical Review B, 97 (2018)165404. DOI:https://doi.org/10.1103/PhysRevB.97.165404
- [21]L. Chioncel, H. Allmaier, E. Arrigoni, A. Yamasaki, M. Daghofer, M.I. Katsnelson, A.I. Lichtenstein, Half-metallic ferromagnetism and spin polarization in CrO2, Physical Review B, 75 (2007)140406. https://journals.aps.org/prb/abstract/10.1103/PhysRevB.75.140406
- [22]P.E. Blochl, Projector augmented-wave method, Phys Rev B Condens Matter, 50 (1994) 17953-17979. https://journals.aps.org/prb/abstract/10.1103/PhysRevB.50.17953pubmed.ncbi.nlm.nih.gov/9976227
- [23]H.J. Monkhorst, J.D. Pack, Special points for Brillouin-zone integrations, Physical Review B, 13 (1976) 5188-5192. https://doi.org/10.1103/PhysRevB.13.5188
- [24]S. Grimme, J. Antony, S. Ehrlich, H. Krieg, A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu, J Chem Phys, 132 (2010) 154104. https://doi.org/10.1063/1.3382344
- [25]A. Togo, I. Tanaka, First principles phonon calculations in materials science, Scripta Materialia, 108 (2015) 1-5. https://doi.org/10.1016/j.scriptamat.2015.07.021
- [26]M. Kan, S. Adhikari, Q. Sun, Ferromagnetism in M nX2 (X = S, Se) monolayers, Phys Chem Chem Phys, 16 (2014) 4990-4994. https://doi.org/10.1039/C3CP55146F
- [27]M. Kan, G. X. Zhang, Y. Zhou, Q. Sun, Y. Kawazoe, P. Jena, The Intrinsic Ferromagnetism in a MnO2 Monolayer, J Phys Chem Lett, 4 (2013) 3382-3386. https://doi.org/10.1039/C3CP55146F
- [29]Liu, L.; Zhang, X. A User Friendly and Efficient Tool for Implementing Monte Carlo Simulations to Estimate Curie/Neel Temperature. https://github.com/gold doushi/mcsolver
