WorksPhysics and Astronomy
The light curve modeling of eclipsing cataclysmic variables: from period bouncers to nova-likes
Abstract
I describe the basic concepts used in developing the computer code CVlab V2.0, which simulates the light curves of close binary systems with accretion-disk structures. I provide a detailed description of the code, including its underlying assumptions, limitations, and applications, as well as prospects for future development.
THE GOLDEN AGE OF CATACLYSMIC VARIABLES AND RELATED OBJECTS - VII, September 1-6, 2025 in Palermo (Italy)
© Copyright owned by the author(s) under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND 4.0). All rights for text and data mining, AI training, and similar technologies for commercial purposes, are reserved. ISSN 1824-8039. Published by SISSA Medialab. https://pos.sissa.it/
Introduction
Binary stars are among the most fundamental and informative objects in astrophysics. A significant fraction of all stars in the Galaxy—perhaps even the majority—reside in binary or multiple systems[1]. These systems provide one of the most powerful means of determining the fundamental stellar parameters that govern stellar structure and evolution. In particular, mass is the key quantity that dictates a star’s evolutionary path, internal structure, and final fate. For single stars, direct mass measurements are nearly impossible, whereas for binary systems, dynamical interactions allow the component masses to be determined with remarkable precision. Observational studies of binary stars, combined with advances in light-curve modeling, spectroscopy, and astrometry, enable direct estimates of radii, effective temperatures, luminosities, and in some cases surface gravities and metallicities of the stellar components. Such measurements provide crucial tests for stellar evolutionary models. Close binary systems, in particular, play a central role in modern astrophysics. In these systems, the components are sufficiently close that tidal forces, irradiation, and mass transfer shape their observable characteristics and evolutionary trajectories. The exchange of matter and angular momentum produce a broad range of astrophysical phenomena, including accretion disks, hotspots, jets, nova eruptions, and in extreme cases, compact-object systems such as cataclysmic variables[2], X-ray binaries[3, 4], and millisecond pulsars[5, 6]. Studying these systems offers insight not only into binary evolution, but also into the physics of accretion, magnetic fields, thermonuclear processes, and surface inhomogeneities in interacting stars. The presence of eclipses imposes strong geometric constraints on the inclination of the orbit, the separation of the components, and the distribution of radiation over the stellar surfaces. These constraints make eclipsing binaries some of the most accurate stellar laboratories known. When combined with radial-velocity measurements or distance estimates from Gaia[7], eclipsing binaries can yield physical parameters with unprecedented precision, enabling stringent tests of fundamental stellar physics. As the volume and quality of observational data continue to increase—with contributions from wide-field surveys such as ZTF[8], ASAS-SN[9], TESS[10], and Gaia[11]—the need for robust and flexible modeling tools becomes increasingly important. Modern modeling methods, built upon current understanding of binary-star physics, allow large samples of systems to be analyzed in a uniform way, providing statistically meaningful comparisons between theory and observations. The development of specialized computational tools[12, 13, 14, 15, 16] is thus essential for interpreting the rich observational phenomenology of interacting binaries.
In this paper, I present the key characteristics of our modeling code, designed to derive the fundamental parameters of close binary systems containing accretion structures through detailed fitting of their observational light curves.
Basic geometry assumption
The emitting surface of an astrophysical source is defined as the plasma layer corresponding to an optical depth of at a given wavelength or band. In a general geometrical framework, the surface of any astrophysical object can be represented as a geometric transformation or combination of a small number of basic topological components—primarily a sphere and a torus, or their fragments (see Figure 1). A non-overlapping triangular mesh of sufficient resolution can be used to
Figure 1. Top) The basic topological components of the code, the sphere and the torus, covered by non-overlapping triangular mesh. Bottom) Illustrative view on a binary system with different structure elements included in the code.
approximate either of these surfaces with the required level of detail. The emission from a point on such a surface toward the observer is described by the equation of a ray in three-dimensional space. This ray is defined by the coordinates of the emitting point and by the components of the direction vector that is parallel to the line of sight:
where is a scalar parameter representing the distance along the ray. Each surface element from which the radiation originates is represented by a triangle (see Figure 2) defined by its vertex coordinates , , and in three-dimensional space. The emitting point associated with the triangle is taken to be its centroid, whose coordinates are given by

Figure 2. The illustration of basic triangle parameters.
For each triangular element, it is straightforward to determine the equation of its plane, its spatial orientation relative to the observer’s line of sight, and its surface area. According to the principles of analytic geometry, each triangular element lies in a plane defined by the equation
where , , and are the components of the normal vector to the plane, and is the constant term determined by the position of the triangle in space defined by
The area of the triangular element can be expressed as
where , , and are the coefficients of the plane equation (see Eq. (3)) corresponding to the components of the surface normal vector.
The angle between the line of sight and its projection onto the triangle surface is defined by
and the corresponding angle between the surface normal and the direction of the line is .
A given triangular element of a component is considered visible to the observer if the ray emerging from its centroid does not intersect any internal point of another triangular element belonging to any other component of the system.
Basic physic assumption
System geometry
The geometry of a close binary system is determined by the shape of the Roche lobes. In a coordinate system corotating with the binary, with the origin at the primary component, the -axis directed along the line connecting the mass centres of the two stars, and the -axis perpendicular to the orbital plane, the Roche potential is given by the sum of the gravitational potentials of both stars and the effective potential arising from the fictitious centrifugal force[2 and references therein]:
where and , is the system separation, and is the orbital period of the system
The inner Lagrangian point located between system component and is defined by . The mass ratio of the system is defined as:
Element emission
The current version of the code assumes that each surface element of the object emits as a blackbody with intensity . The corresponding model flux received by the observer is
where
Here is the effective temperature of the -th surface element, is the filter transmission function obtained from the Filter Profile Service2, and if the element is visible to the observer and otherwise. The index denotes the component of the system (e.g. primary, secondary, or accretion disc) to which the -th surface element belongs.
The resulting synthetic magnitude in a photometric band is then given by
where is the total flux from all visible elements of component in band , is the photometric zero point for that band, and represents the interstellar extinction correction.
The primary
In the current version of the code, five types of primary stars are implemented: a zero-age main sequence (ZAMS) star, an evolved star, a white dwarf (WD), a neutron star (NS), and a black hole (BH). The shape of the primary component is always assumed to be spherical, which implies that the Roche-lobe radius of the primary . This assumption is valid for compact objects and usually holds for ZAMS stars, but it should be reconsidered in systems where the primary is an evolved star.
For a ZAMS star, the stellar parameters follow the approximate relations and , as given by [17]. In the case of an evolved star, both the radius and the mass are treated as free parameters and .
For a white dwarf primary, the effective temperature is a free parameter, while its radius (in cm) is related to the mass (in solar masses) according to the mass–radius relation from [18]:
The neutron star (NS) is assumed to have a fixed radius of 13 km, while its mass and effective temperature can be treated as free parameters.
The black hole (BH) is defined by its Schwarzschild radius:
For ZAMS or evolved stars, as well as for WDs and NSs, the primary component can possess a dipolar magnetic field and a surface spot, which are described in the following sections.
The rotational period of the primary (ZAMS, evolved star, or WD) is a free parameter, defined as a fraction of the orbital period.
Limb and gravitational darkening
The code includes the quadratic limb-darkening law for the primary and secondary,
with the limb-darkening coefficients taken from [19, 20] for ZAMS and evolved stars. Gravity darkening is implemented following [21], equation 5.4. In the case of a white dwarf primary, the limb-darkening coefficients were taken from [22].
The corresponding coefficients are recalculated for the exact effective temperature, surface gravity (), and photometric filter using linear interpolation between the nearest tabulated values.
The secondary
The shape of the stellar surface is determined by the gravitational potential within the corresponding Roche lobe. The maximum possible stellar radius corresponds to the case when the star completely fills its Roche lobe. Mass transfer between the components occurs when the secondary star fills its Roche lobe. If the secondary does not fill its Roche lobe, its surface shape follows the equipotential surface corresponding to the adopted filling factor. The filling factor is defined as the ratio between the distance from the center of mass of the secondary to the inner Lagrangian point and the distance corresponding to the full Roche-lobe radius.
The effective temperature of the secondary, , is treated as a free parameter in the code. The relation3 for Spectral Type of the secondary vs. follows to the definition of [23]. It is assumed that the rotational period of the secondary is synchronized with the orbital period of the system.
Irradiation of the secondary
Diskless systems.
The irradiation of the secondary was taken into account as
where and are effective temperatures of the "day-side" and "night-side" surface element of the secondary, respectively, is the effective heating flux incoming to the "day-side" surface element area of the secondary, and is the Stefan-Boltzmann constant. The effective heating in such model defined by the irradiation factor [ergs s cm sr] as
where is the angle between the incoming wind/flux and the normal to the surface element , is the solid angle from which the primary is visible from the surface element of the secondary.
Disk systems.
In the case of a disk system, not all parts of the primary surface are necessarily visible from a surface element on the irradiated (“day-side”) hemisphere of the secondary. For an optically thick accretion disk, the disk can cast a shadow on the secondary star’s surface. In the current version of the code, it is assumed that the variation of the irradiation factor also accounts for the partial visibility of the primary surface as seen from the secondary. The shadowed region is determined by the geometry of the disk surface (defined as the layer with optical depth ).
The accretion stream
The equations of motion for a test particle originating from the secondary and moving in the – plane of the Roche lobe of the primary are given by [24] as
where and . The coordinate system is centered on the primary (mass ) at the origin , while the secondary (mass ) is located at .
In the model, the stream is assumed to have a constant cross-sectional size (a free parameter) along its trajectory. Its temperature varies linearly along the stream, starting from the value at the inner Lagrangian point (), equal to the effective temperature of the secondary (), and reaching at the disk–stream impact region (the “hot spot” or “hot line”). The emitted flux from the stream is defined by Equation (11).
The accretion disk
The accretion disk in the model is assumed to be circular and is characterized by its inner and outer radii, and , respectively, and by the disk height at the outer edge. The vertical structure of the disk is described by
where is a free parameter. As an initial value, we adopt the standard value [2 Eq2.51b].
The model assumes that the disk radiates as a blackbody at the local effective temperature, which varies radially according to
where is the radius of the primary, is the mass-transfer rate, and is the Stefan–Boltzmann constant. In the standard steady-state accretion disk model, the exponent EXP is fixed at 0.25 [2, Eq. 2.35]; however, we allow it to deviate slightly from this canonical value, following the approach of [25]. The local flux from each disk surface element is then computed using Equation (11).
The equality of the inner and outer radii of the disk defines a diskless system, in which, in the presence of a magnetic field at the primary (polar), this radius determines the radius of the magnetosphere . At this distance, the transition occurs from the ballistic trajectory of the accretion stream to the motion of plasma along the magnetic field lines toward the magnetic pole of the primary.
Disk limb-darkening
We used linear limb-darkening law
where was taken following Eddington approximation (see [26]).
The hot spots/lines
We used a complex model for the spot, as presented in Figure 3. The impact of the stream with the outer edge of the disk forms a shock-heated trailing arc along the rim. The vertical size and the temperature of the arc-like hot spot are not uniform; it is wider and hotter at the impact point (), quickly increases before the impact point, and slowly declines after one in the temperature and the vertical extension, according to an arbitrarily selected manner described by the following equations:

Figure 3. Model of CzeV404 Her including the definition of the hot-spot parameters (see [27]).
where is the angle between the line connecting the stars in conjunction and the direction of the spot viewed from the centre of mass; is a linear function with constants and defined by a boundary conditions of , and , and , are free parameters. The index corresponds to parts of the hot spot before and after the impact point.
A simple modification of the code allows the inclusion of any number of spots, both at the outer and inner radii of the disk. The boundary layer (the region in which gas moving at Keplerian velocity in the disk is decelerated to match the surface velocity of the primary) can be included as a contribution from an elongated hot spot at the inner radius of the disk, provided that it extends to the surface of the primary.
The spiral arms in the accretion disk
The two humps per orbital period in the light curve of dwarf novae with small mass ratio was predicted in [28] as a result of formation of spiral density waves in the outskirts of the disk under the influence of 2:1 resonance. The code includes this option following [29]. The spiral pattern is described by multiplying thickness of the disk with , as defined below:
where is the inverse of pitch angle, - position angle of the spirals against the binary components, is the width of the spiral pattern, degree for the first spiral and 180 degree for the second, and the disk element coordinates in the polar system. In addition to the original model we put an excess of the effective temperature in the spiral () defined as
Magnetic field and spot at the primary
The code allows the definition of a spot on the primary surface and a dipole magnetic field. The spot is characterized by its radius (expressed as a fraction of the primary radius) and by two angular parameters: the inclination angle between the rotational axis and the spot centre, and the azimuthal angle. The initial azimuth is defined with respect to the direction of the terminal point of the accretion stream. If a magnetic field is present, it is assumed to originate from the centre of the spot and to share the same inclination. The radius of the magnetic field corresponds to the inner radius of the accretion disk. When the primary rotates with its intrinsic rotational period, the magnetic field rotates accordingly.
It is possible to trace the trajectories of accreting material within the magnetosphere along the magnetic field lines. However, the computation of the radiative flux from such magnetically guided accretion streams represents a complex problem and is not yet implemented in the current version of the code.
Code structure and running
The code was written in the C programming language and employs the plplot4 library for system visualization and graphical output. It consists of a main program and a set of modular subroutines, each responsible for the computation and visualization of a specific system component.
The current version of the code includes the following functional modules:
a) Main body:
CVlab202b) System components:
primary,secondary,stream,disk,streamMF,primaryMFc) Radiation components:
flux,blackbody,filter,limbdarking,limbdarkingWDd) Geometry components:
direction,line,triangl,geometry,minmaxe) Input/output components:
input,systempar,printSys,SpTypef) Visualization components:
view0,view1,view2
Code input parameters
The input parameters of the code are specified in the param.ini file, which currently includes 55 parameters. These parameters can be grouped into several categories: (1) parameters defining the calculation sequence; (2) parameters specifying the optical and infrared bands for light-curve modeling; (3) the distance to the object and the interstellar absorption; (4) general system parameters such as the mass of the primary, the system inclination, and the mass ratio; (5) parameters describing the accretion disk, the number and properties of spots, and the presence of spiral arms; (6) parameters defining the type and rotation of the primary, the magnetic field, and the possible presence of a surface spot; and (7) technical parameters controlling graphics and output options.
The code can be executed as a stand-alone program or embedded within a script or a subroutine of another computational package.
The code output
Depending on the input parameters, the code produces the following output: a file system.out, which contains general information about the performed calculations; a file Phot.dat, which includes the resulting model light curve (see Figure 4); a set of files describing the 3D geometry of each system component as visible to the observer; and several PDF files containing graphical visualizations of the system and its components. At minimum, the code can compute the total flux and generate a visual representation of the system at a specified orbital phase, as seen by the observer. The typical computation time for a single orbital phase of a system that includes all possible components is minutes. By using scripting and multicore computing resources, it is possible to generate complete model light curves within a reasonable total computation time.

Figure 4. The contribution of different components to the total flux. The top side of the plot presents an artistic view of the system in corresponding orbital phases. The lack of continuity in the bright spot curve is due to a pixelation of our model. (from [30])
The fitting of observational data
The fitting of the observational data is possible by using an additional minimization program (for an example exploring the gradient descent method [31]) which minimizes
the is observational and model data in corresponding band and phases (). The minimization can be applied to any user-selected subset of model parameters.
Examples of code applications
There are a number publications with application of different versions of the code to analyses of binary systems as nova-like[32, 33, 34] and dwarf novae cataclysmic variables[15, 27, 30, 35, 36, 37, 38, 39], millisecond pulsars[40, 41, 42, 43, 44], a low-mass X-ray binary [45], and a B[e] star [46]. I give an example of results obtained for Z-Cam type system AY Psc obtained recently by us [30] in Figure 5. The code provided a good agreement with another modelling tool also (see [38]).

Figure 5. Upper part: Results of the light curve fit of AY Psc eclipses in quiescence/low (left), standstill (middle) and in outburst/high (right) state. Bottom: Models of AY Psc in quiescence (left), standstill (middle) and in outburst (right). The colors mark the effective temperature in Kelvin of the system elements (right bar). The upper panels correspond to orbital phase , the middle ones are views on the geometry of the system at the orbital phase of from the inclination angle , and the lower panels correspond to and inclination angle degree. (from [30])
Limitations of the code
Firstly, the code is based on an idealized geometric representation of the system, as described above. Naturally, the shapes of the accretion disk and the hot spot adopted in the model are strong simplifications of the real physical structures. Secondly, the number of surface elements used to describe each component is limited by the available computer memory and computation time. The code can fit only binary system with circular orbits and a secondary with rotation locked to the orbital period.
Another significant limitation arises from the assumption that each emitting element radiates as a black body. This approximation complicates the fitting of multi-band observational data, since the intrinsic spectra of the components deviate from the black-body distribution. Consequently, in optically thin regions, the derived effective temperature represents only the radiation intensity and does not correspond to the kinetic temperature of the emitting plasma. Therefore, differences in the effective temperature derived from various photometric bands indicate spectral deviations from the black-body law.
In general, for this type of modeling, it is essential to clearly recognize that the interpretation of the obtained results is constrained by the underlying assumptions of the model.
Summary and Future Development
CVlab V2.0 is designed to fit the light curves of close binary systems such as cataclysmic variables (CVs), AM CVn stars, Algol-type binaries, millisecond pulsars, and low-mass X-ray binaries (LMXBs). In certain cases, it can also be applied to model the observational data of ordinary binary stars with ZAMS or evolved components, provided that the inherent limitations of the code are taken into account. The primary purpose of the code is to determine the fundamental characteristics of binary systems, including the component’s masses, radii, effective temperatures, and the parameters of accretion disks together with any structures present within them. In addition, the code provides visualization of the system geometry, the distribution of effective temperature across the components, and the velocity field within the system. Knowledge of the velocity field within the system will also enable the construction of synthetic Doppler maps of the accretion structures.
Future development of the code aims to incorporate a more realistic accretion-disk structure computed using hydrodynamic simulations, as well as stellar and disk-atmosphere models to generate more realistic system emission.
The code is not yet publicly available, as it is still undergoing development and testing. However, it can be used to analyze specific data upon direct request to the developer ([email protected]).
Acknowledgments
The author acknowledges DGAPA-PAPIIT grant IN105826
References
References
- [1]G. Duchêne and A. Kraus, Stellar Multiplicity, ARA&A 51 (2013) 269 [1303.3028].DOI
- [2]B. Warner, Cataclysmic variable stars, vol. 28 of Cambridge Astrophysics Series, Cambridge University Press, Cambridge (1995).
- [3]P. Kretschmar, F. Fürst, L. Sidoli, E. Bozzo, J. Alfonso-Garzón, A. Bodaghee et al., Advances in Understanding High-Mass X-ray Binaries with INTEGRAL and Future Directions, New A Rev. 86 (2019) 101546 [2009.03244].
- [4]A. Bahramian and N. Degenaar, Low-Mass X-ray Binaries, in Handbook of X-ray and Gamma-ray Astrophysics, p. 120 (2023), DOI.DOI
- [5]D.R. Lorimer, Binary and Millisecond Pulsars, Living Reviews in Relativity 11 (2008) 8 [0811.0762].
- [6]R.N. Manchester, Millisecond Pulsars, their Evolution and Applications, Journal of Astrophysics and Astronomy 38 (2017) 42 [1709.09434].DOI
- [7]C.A.L. Bailer-Jones, J. Rybizki, M. Fouesneau, G. Mantelet and R. Andrae, Estimating Distance from Parallaxes. IV. Distances to 1.33 Billion Stars in Gaia Data Release 2, AJ 156 (2018) 58 [1804.10121].
- [8]E.C. Bellm, S.R. Kulkarni, T. Barlow, U. Feindt, M.J. Graham, A. Goobar et al., The Zwicky Transient Facility: Surveys and Scheduler, PASP 131 (2019) 068003 [1905.02209].DOI
- [9]T. Jayasinghe, C.S. Kochanek, K.Z. Stanek, B.J. Shappee, T.W.-S. Holoien, T.A. Thompson et al., The ASAS-SN catalogue of variable stars I: The Serendipitous Survey, MNRAS 477 (2018) 3145 [1803.01001].DOI
- [10]G.R. Ricker, J.N. Winn, R. Vanderspek, D.W. Latham, G.Á. Bakos, J.L. Bean et al., Transiting Exoplanet Survey Satellite (TESS), Journal of Astronomical Telescopes, Instruments, and Systems 1 (2015) 014003.
- [11]Gaia Collaboration, T. Prusti, J.H.J. de Bruijne, A.G.A. Brown, A. Vallenari, C. Babusiaux et al., The Gaia mission, A&A 595 (2016) A1 [1609.04153].
- [12]R.E. Wilson and E.J. Devinney, Realization of Accurate Close-Binary Light Curves: Application to MR Cygni, ApJ 166 (1971) 605.DOI
- [13]C.M. Copperwheat, T.R. Marsh, V.S. Dhillon, S.P. Littlefair, R. Hickman, B.T. Gänsicke et al., Physical properties of IP Pegasi: an eclipsing dwarf nova with an unusually cool white dwarf, MNRAS 402 (2010) 1824 [0911.1637].
- [14]R.P. Breton, S.A. Rappaport, M.H. van Kerkwijk and J.A. Carter, KOI 1224: A Fourth Bloated Hot White Dwarf Companion Found with Kepler, ApJ 748 (2012) 115 [1109.6847].DOI
- [15]S. Zharikov, G. Tovmassian, A. Aviles, R. Michel, D. Gonzalez-Buitrago and M.T. Garcia-Diaz, The accretion disk in the post period-minimum cataclysmic variable SDSS J080434.20 + 510349.2, A&A 549 (2013) A77 [1211.1357].
- [16]A. Prša, K.E. Conroy, M. Horvat, H. Pablo, A. Kochoska, S. Bloemen et al., Physics Of Eclipsing Binaries. II. Toward the Increased Model Fidelity, ApJS 227 (2016) 29 [1609.08135].DOI
- [17]O.Y. Malkov, Mass-luminosity relation of intermediate-mass stars, MNRAS 382 (2007) 1073.DOI
- [18]M. Nauenberg, Analytic Approximations to the Mass-Radius Relation and Energy of Zero-Temperature Stars, ApJ 175 (1972) 417.DOI
- [19]A. Claret, P.H. Hauschildt and S. Witte, New limb-darkening coefficients for PHOENIX/1D model atmospheres. I. Calculations for 1500 K ≤ T_eff ≤ 4800 K Kepler, CoRot, Spitzer, uvby, UBVRIJHK, Sloan, and 2MASS photometric systems, A&A 546 (2012) A14.DOI
- [20]A. Claret, P.H. Hauschildt and S. Witte, New limb-darkening coefficients for Phoenix/1d model atmospheres. II. Calculations for 5000 K ≤ T_eff ≤ 10 000 K Kepler, CoRot, Spitzer, uvby, UBVRIJHK, Sloan, and 2MASS photometric systems, A&A 552 (2013) A16.
- [21]A. Prša, Modeling and Analysis of Eclipsing Binary Stars; The theory and design principles of PHOEBE (2018), 10.1088/978-0-7503-1287-5.
- [22]A. Claret, E. Cukanovaite, K. Burdge, P.-E. Tremblay, S. Parsons and T.R. Marsh, Gravity and limb-darkening coefficients for compact stars: DA, DB, and DBA eclipsing white dwarfs, A&A 634 (2020) A93 [2001.07129].
- [23]M.J. Pecaut and E.E. Mamajek, Intrinsic Colors, Temperatures, and Bolometric Corrections of Pre-main-sequence Stars, ApJS 208 (2013) 9 [1307.2657].
- [24]D.N.C. Lin and J.E. Pringle, Numerical Simulation of Mass Transfer and Accretion Disc Flow in Binary Systems, in Structure and Evolution of Close Binary Systems, P. Eggleton, S. Mitton and J. Whelan, eds., vol. 73 of IAU Symposium, p. 237, Jan., 1976.
- [25]A.P. Linnell, P. Godon, I. Hubeny, E.M. Sion and P. Szkody, The Anomalous Accretion Disk of the Cataclysmic Variable RW Sextantis, ApJ 719 (2010) 271 [1006.2832].
- [26]B. Paczynski and A. Schwarzenberg-Czerny, Disk accretion in U Gem., Acta Astron. 30 (1980) 127.
- [27]J. Kára, S. Zharikov, M. Wolf, H. Kučáková, P. Cagaš, A.L. Medina Rodriguez et al., The period-gap cataclysmic variable CzeV404 Her: A link between SW Sex and SU UMa systems, A&A 652 (2021) A49 [2107.02664].DOI
- [28]D.N.C. Lin and J. Papaloizou, Tidal torques on accretion discs in binary systems with extreme mass ratios., MNRAS 186 (1979) 799.DOI
- [29]I. Hachisu, M. Kato and T. Kato, Detection of Two-armed Spiral Shocks on the Accretion Disk of the Eclipsing Fast Nova V1494 Aquilae, ApJ 606 (2004) L139 [astro-ph/0403589].DOI
- [30]J. Kára, S. Zharikov, M. Wolf, A. Amantayeva, G. Subebekova, S. Khokhlov et al., The Z Camelopardalis-type Star AY Piscium: Stellar and Accretion Disk Parameters, ApJ 950 (2023) 47 [2305.14158].DOI
- [31]W.H. Press, S.A. Teukolsky, W.T. Vetterling and B.P. Flannery, Numerical Recipes: The Art of Scientific Computing, Cambridge University Press, Cambridge, UK, 3rd ed. (2007).
- [32]M.S. Hernandez, S. Zharikov, V. Neustroev and G. Tovmassian, Structure of accretion flows in nova-like cataclysmic variables: RW Sextantis and 1RXS J064434.5+334451, MNRAS 470 (2017) 1960 [1706.06236].DOI
- [33]G. Subebekova, S. Zharikov, G. Tovmassian, V. Neustroev, M. Wolf, M.-S. Hernandez et al., Structure of accretion flows in the nova-like cataclysmic variable RW Tri, MNRAS 497 (2020) 1475 [2007.07478].DOI
- [34]A.L. Medina Rodriguez, S. Zharikov, J. Kára, M. Wolf, A. Agishev and S. Khokhlov, VY Scl-type cataclysmic variable SDSS J154453.60+255348.8: stellar and disc parameters, MNRAS 521 (2023) 5846.DOI
- [35]V.V. Neustroev, G.H. Tovmassian, S.V. Zharikov and G. Sjoberg, Steps towards a solution of the FS Aurigae puzzle - II. Confirmation of the intermediate polar status, MNRAS 432 (2013) 2596 [1304.3454].DOI
- [36]S. Zharikov and G. Tovmassian, CVs Around the Minimum Orbital Period, Acta Polytechnica CTU Proceedings 2 (2015) 41.DOI
- [37]A. Amantayeva, S. Zharikov, K.L. Page, E. Pavlenko, A. Sosnovskij, S. Khokhlov et al., Period Bouncer Cataclysmic Variable EZ Lyn in Quiescence, ApJ 918 (2021) 58.DOI
- [38]J. Echevarría, S. Zharikov and I. Mora Zamora, The period bouncer system SDSS J105754.25+275947.5: first radial velocity study, MNRAS 526 (2023) 5110 [2310.00909].DOI
- [39]J. Kára, S. Zharikov, M. Wolf, N. Vaidman, A. Agishev, S. Khokhlov et al., Hot donors in cataclysmic variables: The case of EI Psc, A&A 699 (2025) A81 [2505.21865].
- [40]S. Zharikov, A. Kirichenko, D. Zyuzin, Y. Shibanov and J.S. Deneva, Optical detection of the black widow binary PSR J2025+1219, MNRAS 489 (2019) 5547 [1909.00483].
- [41]D.A. Zyuzin, A.Y. Kirichenko, A.V. Karpova, Y.A. Shibanov, S.V. Zharikov, M.R. Gilfanov et al., Nature of 4FGL J1838.2+3223: A flaring ’spider’ pulsar candidate, MNRAS 527 (2024) 6712 [2311.09108].DOI
- [42]A.V. Bobakov, A.Y. Kirichenko, S.V. Zharikov, A.V. Karpova, D.A. Zyuzin, Y.A. Shibanov et al., Two black widow pulsars in the optical and X-rays, A&A 690 (2024) A173 [2407.17187].DOI
- [43]A.V. Karpova, S.V. Zharikov, D.A. Zyuzin, A.Y. Kirichenko, Y.A. Shibanov and I.F. Márquez, 4FGL J1544.2-2554: A new spider pulsar candidate, A&A 693 (2025) A158 [2411.16350].DOI
- [44]A.V. Bobakov, A. Kirichenko, S.V. Zharikov, D.A. Zyuzin, A.V. Karpova, Y.A. Shibanov et al., Studying the black widow pulsars PSR J0312-0921 and PSR J1627+3219 in the optical and X-rays, A&A 702 (2025) A256 [2509.01488].DOI
- [45]V.V. Neustroev, A. Veledina, J. Poutanen, S.V. Zharikov, S.S. Tsygankov, G. Sjoberg et al., Spectroscopic evidence for a low-mass black hole in SWIFT J1753.5-0127, MNRAS 445 (2014) 2424 [1409.4423].DOI
- [46]A.S. Nodyarov, A.S. Miroshnichenko, S.A. Khokhlov, S.V. Zharikov, A.T. Agishev, I.A. Gabitova et al., Properties of Galactic B[e] Supergiants. X. Refined Orbit and Fundamental Parameters of the HD 327083 Binary System, ApJ 968 (2024) 52.DOI
