WorksPhysics and Astronomy
Multilevel AlScN Ferroelectric Diode Crossbar Arrays with Sub-200 nm Cells for Selector-Free Nonvolatile Memory
Abstract
Passive crossbar arrays are a leading route to high-density nonvolatile memory and in-memory computing, but without a selector the memory element itself must supply the nonlinearity that suppresses sneak-path currents. Here we scale aluminum scandium nitride (AlScN) ferroelectric diodes (FeDs) in both dimensions that matter - the ferroelectric is thinned to 10 nm and the junction diameter is reduced to 100 nm. We further integrate 200 nm cells into a 2-kilobyte (128 * 128) passive crossbar. At a junction area of 0.0314 um2 this is a ~625 reduction in cell area, at equal array capacity, relative to kilobyte-scale AlScN FeD crossbars built on 5 μm cells. The 10 nm Al0.64Sc0.36N layer reverses its polarization under pulses of 50 ns full width at half maximum at a pulse-energy density of ~16 pJ μm-2, corresponding to ~0.5 pJ per 200 nm cell. Pulsed programming at 17.5 V and 1 kHz yields an ON/OFF ratio of 4.2 * 103 in a 200 nm cell, while DC characterization of 283 randomly addressed cells of the 2-kB array gives ON/OFF and rectification ratios at 5 V of 43 33 and 61 74, from which we derive the sub-array size that selector-free reading currently supports. Eight conductance levels (three bits) written into a 200 nm array cell remain resolvable for 103 s, and the two extreme states are stable beyond 5 * 104 s. Mapping the measured, nonuniformly spaced levels onto a ResNet-20 network recovers 91.7 +- 0.1 % CIFAR-10 accuracy after quantization-aware training, against a 92.2 +- 0.1 % full-precision baseline. AlScN FeDs thus combine nanosecond switching, three-bit storage and sub-0.05 μm2 cells in a BEOL-compatible, selector-free crossbar.