WorksPhysics and Astronomy
An Inverse-Designed Multilayer Selective Emitter for High-Efficiency Thermophotovoltaics
Abstract
High thermophotovoltaic (TPV) conversion efficiencies have typically relied on photovoltaic cells that reflect sub-bandgap radiation back toward the emitter. Here, we numerically investigate an alternative approach in which spectral selectivity is engineered primarily on the emitter side. We optimize an emitter consisting of 16-layer aperiodic MgO/Si coating on tungsten, for coupling to a GaSb cell with an antireflection coating and an Au mirror. A detailed-balance framework incorporates polarization- and angle-resolved emissivity, multiple reflections, and Auger nonradiative recombination. At an emitter temperature of 1500 K, the optimized structure suppresses 97.1% of the incident-blackbody-equivalent sub-bandgap power at the source; a further 1.9% is returned to the emitter by the cell, leaving 1.0% absorbed parasitically in the cell. The resulting modeled radiative-to-electrical conversion efficiency reaches 47.0%, compared with 30.8% for a SiC emitter paired with the same cell, while maintaining a comparable maximum electrical power density. These findings indicate that emitter-side spectral engineering could substantially relax cell-side photon-recycling requirements and provide significant improvement in TPV conversion.