betaFeedback

WorksPhysics and Astronomy

Quantum teleportation with photons from remote quantum dots emitting at telecom C-band

Abstract

Employing quantum teleportation to increase the communication distance in quantum channels requires distinct quantum light sources, preferably operating at telecommunication wavelength. Here we utilize two semiconductor In(Ga)As quantum dots, strain engineered to emit in the telecom C-band, as sources of single- and entangled-photons, respectively. This enables a full-photonic quantum teleportation experiment, achieving a maximum teleportation fidelity of 92.7(5)%. Owing to state-of-the-art source brightness, and high time resolution, it is here possible to employ the three-photon coincidences to fully quantify the time-dependence of the process. In this way, we highlight current limitations and implement an optimization in the data-processing which leads to the maximization of achievable teleportation fidelity and coincidence rates. These results constitute a step forward in practical implementations of quantum teleportation in future fiber-based quantum networks.

Introduction

Establishing a global quantum internet is a highly rewarding long-term goal, but its realization presents significant technological and scientific challenges. An important building block for such long range networks is the quantum repeater [1, 2], which will drastically increase the communication distance between nodes. A first step towards quantum repeaters is quantum teleportation between remote network nodes [3]. Since its first experimental demonstration in 1997 [4], quantum teleportation has evolved from an intriguing fundamental physics experiment into a promising tool for practical applications [5, 6, 7]. Key elements for such measurements are efficient sources of quantum light, favorably at telecommunication wavelengths for diminishing losses when propagating through silica fibers. Proof-of-principle experiments of quantum teleportation have been demonstrated with parametric processes [4], and various single emitters, from atoms and ions [8, 9, 10], to color centers in diamond [11]. Recently, research on quantum dot (QD)-based quantum teleportation has progressed from seminal studies [12, 13, 14, 15] to experiments demonstrating full-photonic teleportation with two distinct sources: This was demonstrated using GaAs QDs embedded in optical resonators and operating at near-infrared (NIR) wavelengths [16]. At the same time, another experiment utilized similar QDs in combination with quantum frequency conversion to perform the Bell state measurement (BSM) at telecom wavelength [17].

Here, we demonstrate successful quantum teleportation using two quantum dots that emit directly within the technologically relevant telecom C-band. For this purpose, we utilized our state-of-the-art source of entangled photon pairs [18] operated within our high-efficiency stand-alone setup [19] in combination with a second sample serving as source of single photons. To enable interference within the BSM, the single-photon source is spectrally tuned using a piezoelectric actuator [20]. The teleportation process is investigated in terms of its full time-dependence on the detection time separation of the three photons. We report a maximum achievable teleportation fidelity of 92.7(5) %. Furthermore, owing to the time-resolved measurements of the three-photon coincidences, it is possible to quantify the impact of source imperfections. This allows for a novel optimization of data-processing, which leads to maximization of achievable teleportation fidelity and coincidence rates. Based on the figures-of-merit, teleportation fidelity and coincidence rate, this work surpasses previous state-of-the-art implementations of quantum teleportation with remote QD [16, 17] and compares well with other photonic quantum teleportation platforms [10, 21, 22, 23, 24].

Theory

We perform quantum teleportation of an arbitrary input state of photon 1

∣Ψ1in⟩=α∣H1⟩+β∣V1⟩,∣α∣2+∣β∣2=1(1)\lvert\Psi^{\mathrm{in}}_1\rangle= \alpha\lvert H_1\rangle+ \beta\lvert V_1\rangle,\qquad\lvert\alpha\rvert^2 + \lvert\beta\rvert^2 = 1 \tag*{(1)}

with an entangled state ∣Ψ23ent(τ23)⟩\lvert\Psi^{\mathrm{ent}}_{23}(\tau_{23})\rangle of the photons 2, 3 emitted by the biexciton-exciton-cascade of a semiconductor QD. Due to a non-zero fine-structure splitting FSSFSS, the entangled state exhibits a time-evolving phase dependent on the time delay τ23\tau_{23} between the biexciton and exciton photons of the cascade

∣Ψ23ent(τ23)⟩=12(∣H2H3⟩+eiFSSℏτ23∣V2V3⟩).(2)\lvert\Psi^{\mathrm{ent}}_{23}(\tau_{23})\rangle= \frac{1}{\sqrt{2}}\left(\lvert H_2H_3\rangle+ e^{i\frac{FSS}{\hbar}\tau_{23}}\lvert V_2V_3\rangle\right). \tag*{(2)}

After the interference of photons 1 and 2 on a balanced beam splitter (BS), the three-photon-state can be written as [13]

∣Ψ123(τ23)⟩=∣Ψ1in⟩⊗∣Ψ23ent(τ23)⟩=(α∣H1⟩+β∣V1⟩)⊗12(∣H2H3⟩+eiFSSℏτ23∣V2V3⟩)=12(∣Φ12+⟩P(τ23)I+∣Φ12−⟩P(τ23)Z+∣Ψ12+⟩P(τ23)X−i∣Ψ12−⟩P(τ23)Y)∣Ψ3in⟩(3)\begin{aligned} \lvert\Psi_{123}(\tau_{23})\rangle&= \lvert\Psi^{\mathrm{in}}_1\rangle\otimes\lvert\Psi^{\mathrm{ent}}_{23}(\tau_{23})\rangle\\ &= (\alpha\lvert H_1\rangle+ \beta\lvert V_1\rangle)\otimes\frac{1}{\sqrt{2}}\left(\lvert H_2H_3\rangle+ e^{i\frac{FSS}{\hbar}\tau_{23}}\lvert V_2V_3\rangle\right) \\ &= \frac{1}{2}\left(\lvert\Phi^+_{12}\rangle P(\tau_{23})I + \lvert\Phi^-_{12}\rangle P(\tau_{23})Z + \lvert\Psi^+_{12}\rangle P(\tau_{23})X - i\lvert\Psi^-_{12}\rangle P(\tau_{23})Y\right)\lvert\Psi^{\mathrm{in}}_3\rangle \tag*{(3)} \end{aligned}

with the standard Bell states ∣Φ±⟩\lvert\Phi^\pm\rangle, ∣Ψ±⟩\lvert\Psi^\pm\rangle. The final representation uses the Pauli gates II, XX, YY, ZZ and a time-dependent phase gate P(τ23)P(\tau_{23})

P(τ23)=[100eiFSSℏτ23].(4)P(\tau_{23}) = \begin{bmatrix} 1 & 0 \\ 0 & e^{i\frac{FSS}{\hbar}\tau_{23}} \end{bmatrix}. \tag*{(4)}

Thus, the initial phase of the entangled photon pair is fully transferred onto the teleported state of photon 3. This does not directly reduce the faithfulness of the quantum teleportation process but leads, in turn, to a time-dependence of the final photon. The precise transformation between the input state ρ1in\rho^{\mathrm{in}}_1 and output state E(ρ1in)\mathcal{E}(\rho^{\mathrm{in}}_1) can be described with the help of a 4x4 process matrix χmn\chi_{mn} via [25]

E(ρ1in)=∑mnE~mρ1inE~n†χmn(5)\mathcal{E}(\rho^{\mathrm{in}}_1) = \sum_{mn}\widetilde{E}_m\rho^{\mathrm{in}}_1\widetilde{E}^{\dagger}_n\chi_{mn} \tag*{(5)}

with E~i∈{I,X,Y,Z}\widetilde{E}_i \in\{I, X, Y, Z\}. In our experimental realization, we can correctly identify the Bell states ∣Ψ±⟩\lvert\Psi^\pm\rangle. In this case, the χ\chi-matrix of the teleportation process with the time-dependent entangled state reads (see supplementary material for further calculation)

χ∣Ψ±⟩QT(τ23)=12[000001±cos⁡(FSSℏτ23)±sin⁡(FSSℏτ23)00±sin⁡(FSSℏτ23)1∓cos⁡(FSSℏτ23)00000].(6)\chi^{\mathrm{QT}}_{\lvert\Psi^\pm\rangle}(\tau_{23}) = \frac{1}{2} \begin{bmatrix} 0 & 0 & 0 & 0 \\ 0 & 1 \pm\cos\left(\frac{FSS}{\hbar}\tau_{23}\right) & \pm\sin\left(\frac{FSS}{\hbar}\tau_{23}\right) & 0 \\ 0 & \pm\sin\left(\frac{FSS}{\hbar}\tau_{23}\right) & 1 \mp\cos\left(\frac{FSS}{\hbar}\tau_{23}\right) & 0 \\ 0 & 0 & 0 & 0 \end{bmatrix}. \tag*{(6)}

The time dependence of the entangled state is, in turn, reflected in the process matrices. For τ23=0\tau_{23}=0, the process matrices correspond to the ideal χ\chi-matrices for a time-independent entangled state, which we denote as χ∣Ψ±⟩ideal=χ∣Ψ±⟩QT(0)\chi^{\mathrm{ideal}}_{|\Psi^{\pm}\rangle} = \chi^{\mathrm{QT}}_{|\Psi^{\pm}\rangle}(0). After τ23FSS/ℏ=π\tau_{23}^{\mathrm{FSS}}/\hbar= \pi, however, the phase gate P(τ23)P(\tau_{23}) corresponds exactly to a Z-gate. Consequently, the process matrix is then also flipped with respect to the detection of the ∣Ψ⟩|\Psi\rangle-states with χ∣Ψ±⟩QT(πℏ/FSS)=χ∣Ψ∓⟩ideal\chi^{\mathrm{QT}}_{|\Psi^{\pm}\rangle}(\pi\hbar/FSS) = \chi^{\mathrm{ideal}}_{|\Psi^{\mp}\rangle}. Overall, an oscillatory behavior between χ∣Ψ±⟩ideal\chi^{\mathrm{ideal}}_{|\Psi^{\pm}\rangle} is obtained according to the FFS-induced time evolution.

The time dependence of the teleportation process has an important consequence. For truthful information transfer in quantum teleportation, it is inherently required to apply a unitary operation on the teleported qubit. In this case, the unitary that must applied changes over time. If the data are integrated agnostically to the underlying temporal dependence and then the unitary operation is applied, the fidelity of information transfer rapidly decreases for increasing time windows. However, if the underlying temporal structure is known, a drastic improvement of the fidelity can be achieved by applying the expected unitary operation for each time in the protocol. As we show later experimentally, a considerable improvement can already be achieved with restriction to pure Pauli gates. Any Pauli gate can be employed by simple basis flips in the respective other two bases which can be achieved without any experimental overhead.

Results

To generate the three photons, we operate a single-photon source (SPS) and an entangled photon pair source (EPS) according to the schematic and experimental realization depicted in Figure 1 a) and b), respectively. The EPS is located in a separate laboratory room in a transportable, rack-integrated setup [19] and is connected to the SPS via a 50 m fiber link. Both sources share an identical design and are based on InAs QDs emitting directly in the telecom C-band. For an increased efficiency of light extraction, the QD layer is incorporated into a planar cavity structure based on AlAs/GaAs and SiO2_2/TiO2_2 distributed Bragg reflectors [18]. Both sources are operated at about 4 K in cryostats and we employ resonant two-photon excitation (TPE) in order to coherently populate the biexciton state. We use two distinct synchronized pulsed excitation lasers with a repetition frequency of 76 MHz to precisely match the respective spectral TPE resonances. After collection, the excitation laser is filtered via volume Bragg grating (VBG) filters. For the EPS [18], biexciton (photon 2) and exciton (photon 3) are separated via VBG filters and pass through an etalon with 17 GHz bandwidth. For the SPS, we filter the biexciton (photon 1) emission with a VBG and the same type of etalon and utilize a linear polarizer followed by waveplates in order to prepare the different input states ∣Ψin±⟩|\Psi_{\mathrm{in}}^{\pm}\rangle for the teleportation experiment. Photons 1 and 2 meet in the Bell state measurement (BSM) setup with the same wavelength of 1537.14 nm. To achieve this common wavelength, a piezo-electric actuator beneath the sample membrane of the SPS is used, overcoming the initial offset of about 20 GHz. The BSM setup allows for the successful identification of ∣Ψ±⟩|\Psi^{\pm}\rangle states whereas ∣Φ±⟩|\Phi^{\pm}\rangle can not be distinguished. Upon measurement of a Bell state, the polarization state ρ3\rho_3 of photon 3 is investigated via quantum state tomography (QST).

Schematic and experimental realization of the full-photonic quantum teleportation implementation

Figure 1. a) Schematic of the full-photonic quantum teleportation implementation. Two semiconductors QDs are employed as single-photon source (SPS) and entangled photon pair source (EPS) utilizing the biexciton-exciton-cascade. Photon 1 (biexciton photon of the SPS) is prepared in a set of input states ∣Ψ1in⟩\lvert\Psi_{1}^{\mathrm{in}}\rangle and interferes with photon 2 (biexciton photon of the EPS). A Bell state measurement reveals detection of the Bell states ∣Ψ12±⟩\lvert\Psi_{12}^{\pm}\rangle of the photons 1, 2. The polarization state ρ3\rho_{3} of photon 3 (exciton photon of the EPS) is resolved via quantum state tomography (QST). Together, this allows to perform quantum process tomography (QPT) which enables the reconstruction of the process matrix of the quantum teleportation process. b) Experimental realization. SPS and EPS are located in two remote laboratory rooms connected via a 50 m fiber link. Both sources are excited with two separate, synchronized lasers via resonant two-photon excitation. All three photons are individually filtered using volume Bragg grating (VBG) filters and etalons. A polarizer and a subsequent set of quarter-half-quarter waveplates (QWP-HWP-QWP) prepare the input states ∣Ψ1in⟩\lvert\Psi_{1}^{\mathrm{in}}\rangle of photon 1. For the photons 2, 3, each a set of QWP-HWP-QWP matches the EPS polarization eigenbasis to the laboratory frame. The polarization state ρ3\rho_{3} of photon 3 is analyzed using the same set of waveplates realizing a QST setup. Time-resolved characterization of the teleportation process is achieved with superconducting nanowire single-photon detectors (SNSPDs) and a TimeTagger which yield a total detection time jitter of about 60 ps (between two photons).

Before performing the teleportation experiment, we characterize the two employed non-classical photon sources. This will later enable a precise description of the time dependence of the teleportation process given the certain imperfections of the two sources. The two decisive parameters for faithful quantum teleportation are the degree of entanglement of the photon pair 2, 3 as well as the indistinguishability between photons 1 and 2. First, we perform QST of the polarization-entangled two-photon state emitted by the EPS and reconstruct the density matrix ρEPS\rho_{\mathrm{EPS}} by means of maximum likelihood estimation (MLE). Figure 2 a) shows the measured fidelity F(ρEPS,∣Φ+⟩)\mathcal{F}(\rho_{\mathrm{EPS}}, \lvert\Phi^{+}\rangle) dependent on the temporal photon separation τ23\tau_{23}. At zero time delay, a maximum fidelity of 96.95(4) % confirms state-of-the-art performance for telecom C-band entangled photon pair sources [18]. Due to the non-zero FFS, an oscillatory behavior is observed. A fit to the data (see supplementary material for the fit model) allows the determination of the FSS as well as a characterization of the dephasing mechanisms of the exciton spin-state [26], as summarized in table 1. Furthermore, we measure the two-photon interference between photons 1 and 2 in a Hong-Ou-Mandel interferometer. Figure 2 b) shows the correlations for parallel and orthogonal input polarizations. A strong dip around zero time delay can be observed for the parallel measurement. However, spectral broadening of both emitters affects the interference for larger time delays. Similarly to the fidelity, we calculate the HOM visibility dependent on the temporal photon separation τ12\tau_{12} (see Figure 2 c)) as V(τ12)=1−C∥(τ12)/C⊥(τ12)V(\tau_{12}) = 1 - C_{\parallel}(\tau_{12})/C_{\perp}(\tau_{12}) using the time-resolved coincidences C∥C_{\parallel} (C⊥C_{\perp}) for the parallel (orthogonal) measurement. For small time delays, high visibility values up to 88.5(3) % are achieved. A fit to the data (see supplementary material for the fit model) yields the broadening parameter Γ=ΓP12+ΓP22=7.72(7)\Gamma= \sqrt{\Gamma_{\mathrm{P1}}^{2} + \Gamma_{\mathrm{P2}}^{2}} = 7.72(7) GHz (here in full-width at half-maximum of natural frequency) governed by the full inhomogeneous linewidth ΓPi\Gamma_{\mathrm{Pi}} of the interfering photons of both emitters [27]. Furthermore, the fit reveals that the gap between the maximum visibility and unity is solely due to the finite temporal resolution of the detection system of 60 ps. Additional characterization measurements of the sources are provided in the supplementary material.

Figure 2. Characterization of the sources. a) Time-resolved EPS state fidelity F(ρEPS,∣Φ+⟩)\mathcal{F}(\rho_{\mathrm{EPS}}, \lvert\Phi^{+}\rangle). b) HOM interference measurements between photon 1 and photon 2 for parallel and orthogonal polarization setting. c) Calculated HOM visibility VV between photon 1 and photon 2 dependent on τ12\tau_{12}.

For a precise description of the teleportation process, we perform quantum process tomography (QPT) [29, 30]. For this purpose, we prepare photon 1 in four polarization states: ∣H⟩\lvert H\rangle, ∣V⟩\lvert V\rangle, ∣D⟩=(∣H⟩+∣V⟩)/2\lvert D\rangle= (\lvert H\rangle+ \lvert V\rangle)/\sqrt{2} and ∣L⟩=(∣H⟩+i∣V⟩)/2\lvert L\rangle= (\lvert H\rangle+ i\lvert V\rangle)/\sqrt{2}. For each input state ∣Ψ1in⟩\lvert\Psi_{1}^{\mathrm{in}}\rangle, we measure the teleported polarization state ρ3\rho_{3} of photon 3 via QST upon detection of a ∣Ψ12+⟩\lvert\Psi_{12}^{+}\rangle Bell state between photon 1 and photon 2. In the following, we discuss the teleportation results after detection of ∣Ψ12−⟩\lvert\Psi_{12}^{-}\rangle. Detection of ∣Ψ12−⟩\lvert\Psi_{12}^{-}\rangle yields qualitatively the same results which are presented in the supplementary material. Finally, the χ\chi-matrix is obtained from the coincidence statistics via MLE [31]. Error propagation of the stated fidelities is performed via 1000 iterations of Monte-Carlo-simulations based on the measured coincidence statistics. In order to investigate the full time-evolution of the teleportation process, we determine the χ\chi-matrix dependent on the detection times of the three photons. By employing one channel of the BSM as a common start channel, we obtain two time delays. Firstly, the time delay to the detection of the second photon in the BSM which corresponds to τ12\tau_{12}. Secondly, the time delay τTomo−BSM\tau_{\mathrm{Tomo-BSM}} to the detection of photon 3 in the QST setup. If photon 2 is detected on the BSM start channel, then τTomo−BSM\tau_{\mathrm{Tomo-BSM}} corresponds to τ23\tau_{23}. Otherwise, if photon 1 yields the click on the BSM start channel, τ23\tau_{23} is the time difference to the BSM stop channel, which equivalently means τ23=τTomo−BSM−τ12\tau_{23} = \tau_{\mathrm{Tomo-BSM}} - \tau_{12}. Previous demonstrations of quantum teleportation with QD photons [13, 15, 16, 17] investigated the average teleportation fidelity for different sizes of integration time windows. However, the teleportation fidelity strongly differs along the two time axes.

This can be seen in Figure 3 a) which presents a detailed view of the full time dependence showing the time-resolved teleportation fidelity F(χ∣Ψ−⟩meas,χ∣Ψ−⟩ideal)\mathcal{F}\left(\chi^{\mathrm{meas}}_{|\Psi^{-}\rangle},\chi^{\mathrm{ideal}}_{|\Psi^{-}\rangle}\right) of the measured χ\chi-matrix to χ∣Ψ−⟩ideal\chi^{\mathrm{ideal}}_{|\Psi^{-}\rangle}. For optimal interference visibility around τ12=0\tau_{12}=0, the fidelity oscillates due to the time-evolution of the entangled state ∣Ψ23ent(τ23)⟩=12(∣H2H3⟩+eiESSℏτ23∣V2V3⟩)|\Psi^{\mathrm{ent}}_{23}(\tau_{23})\rangle=\frac{1}{\sqrt{2}}\left(|H_{2}H_{3}\rangle+e^{i\frac{E^{\mathrm{SS}}}{\hbar}\tau_{23}}|V_{2}V_{3}\rangle\right). However, this oscillation is significantly reduced as τ12\tau_{12} increases due to the decreasing interference visibility between the photons 1 and 2. The black area corresponds to data points where the overall coincidence level is below 0.5% of the maximum at the (0,0)-time coordinate, and no meaningful χ\chi-matrix can be reconstructed. The overall kite-like structure stems from the discussed relation between τTomo−BSM\tau_{\mathrm{Tomo-BSM}} and τ23\tau_{23}. Further discussion about the time structure of the data is provided in the supplementary material. Based on the time dependence of interference visibility V(τ12)V(\tau_{12}), spin-flip probability PSS(τ23)P_{\mathrm{SS}}(\tau_{23}), and cross-dephasing probability PHV(τ23)P_{\mathrm{HV}}(\tau_{23}) (see Table 1), we calculate the complementary theoretical process matrix (time-dependence is omitted for improved visual clarity; see supplementary material for detailed derivation)

QuantityValue
Maximum EPS state fidelity - F(ρEPS,∣Φ+⟩)\mathcal{F}(\rho_{\mathrm{EPS}}, \lvert\Phi^{+}\rangle)96.95(4) %
Fine-structure splitting - FFSFFS (fit)3.150(1) μ\mueV
Oscillation period - TFFST_{\mathrm{FFS}} (fit)1313(1) ps
Spin-scattering - TSST_{\mathrm{SS}} (fit)18.6(3) ns
Cross-dephasing of EPS exciton state - THVT_{\mathrm{HV}} (fit)17.6(3) ns
Maximum HOM visibility - VV88.5(3) %
Broadening parameter - Γ\Gamma (fit)7.72(7) GHz
Lifetime photon 1 (SPS, biexciton) - TP1T_{\mathrm{P1}}374(1) ps
Lifetime photon 2 (EPS, biexciton) - TP2T_{\mathrm{P2}}294(1) ps
Lifetime photon 3 (EPS, exciton) - TP3T_{\mathrm{P3}}757(1) ps
Count rate photon 1 (SPS, biexciton) - CP1C_{\mathrm{P1}}573 kcps
Count rate photon 2 (EPS, biexciton) - CP2C_{\mathrm{P2}}3465 kcps
Count rate photon 3 (EPS, exciton) - CP3C_{\mathrm{P3}}2042 kcps

Table 1. Summary of the values describing the performance of the EPS as well as the two-photon interference between the two sources as obtained from the measurements in Figure 2. Additionally, the lifetimes of three photons (see supplementary material and [28]) as well as the average count rates during the measurement are stated.

Figure 3. Quantum teleportation with detection of ∣Ψ12−⟩|\Psi^{-}_{12}\rangle. a) Time-resolved teleportation fidelity F(χ∣Ψ−⟩meas,χ∣Ψ−⟩ideal)\mathcal{F}\left(\chi^{\mathrm{meas}}_{|\Psi^{-}\rangle},\chi^{\mathrm{ideal}}_{|\Psi^{-}\rangle}\right) of the measured χ∣Ψ−⟩meas\chi^{\mathrm{meas}}_{|\Psi^{-}\rangle} towards the static process matrix χ∣Ψ−⟩ideal\chi^{\mathrm{ideal}}_{|\Psi^{-}\rangle}. b) Simulated fidelity F(χ∣Ψ−⟩simu,χ∣Ψ−⟩ideal)\mathcal{F}\left(\chi^{\mathrm{simu}}_{|\Psi^{-}\rangle},\chi^{\mathrm{ideal}}_{|\Psi^{-}\rangle}\right) based on the characterization of the sources. c), d) Evolution of F(χ∣Ψ−⟩meas,χ∣Ψ−⟩ideal)\mathcal{F}\left(\chi^{\mathrm{meas}}_{|\Psi^{-}\rangle},\chi^{\mathrm{ideal}}_{|\Psi^{-}\rangle}\right) dependent on τ23\tau_{23} (time evolution of the entanglement of the EPS) and τ12\tau_{12} (change of interference visibility between photon 1 and photon 2), respectively. e), Real and f) imaginary part of the measured process matrix χ∣Ψ−⟩meas\chi^{\mathrm{meas}}_{|\Psi^{-}\rangle} at τ12=τ23=0\tau_{12}=\tau_{23}=0 for a 30 ps time window. The fidelity to the ideal process matrix χ∣Ψ−⟩ideal\chi^{\mathrm{ideal}}_{|\Psi^{-}\rangle} (black frames) is 92.7(5) %.

χ∣Ψ−⟩simu=V(1−PSS)(1−PHV)χ∣Ψ−⟩QT+(1−PSS)(VPHV+1−V)χclass+PSSχmix.(7)\chi^{\mathrm{simu}}_{|\Psi^{-}\rangle}=V(1-P_{\mathrm{SS}})(1-P_{\mathrm{HV}})\chi^{\mathrm{QT}}_{|\Psi^{-}\rangle}+(1-P_{\mathrm{SS}})(VP_{\mathrm{HV}}+1-V)\chi^{\mathrm{class}}+P_{\mathrm{SS}}\chi^{\mathrm{mix}}. \tag*{(7)}

Three components determine the real process matrix with source imperfections [15]. First, the time-dependent process matrix χ∣ψ−⟩QT\chi_{\left|\psi_{-}\right\rangle}^{\mathrm{QT}} for quantum teleportation, as described in equation (6), which is obtained for successful interference and no spin-dephasing effects. If either cross-dephasing occurs or the interference fails, classical correlations χclass\chi^{\mathrm{class}} are still present due to measurements in the eigenbasis of the entangled state. Finally, spin-scattering fully scrambles the polarization state, leading to a mixed process χmix\chi^{\mathrm{mix}}. Based on equation (7), we model the expected fidelity, as illustrated in Figure 3 b). Owing to the diligent source characterization, the modeled fidelity accurately matches the measured data. In order to gain deeper insight into the time dependence, we depict the temporal evolution of the fidelity of the data and simulation dependent on the time delays τ23\tau_{23} and τ12\tau_{12} in Figure 3 c) and d), respectively. As anticipated, the fidelity oscillates with increasing τ23\tau_{23} due to the FSSFSS-induced phase evolution. Thereby, the quantum process changes between YY- and XX-gate. A minor reduction of the teleportation fidelity for larger time delays originates from the increased spin-scattering and cross-dephasing probability. On the other hand, increasing the photon separation τ12\tau_{12} is accompanied with a decrease in interference visibility. Because the classical correlations are preserved, a statistical mixture between YY and XX processes is obtained. Consequently, the fidelity converges to 0.5 which is the limit for fidelity towards the ideal quantum process matrix achievable with classical methods [5, 10, 32, 33]. For vanishing time delays (τ12=τ23=0\tau_{12} = \tau_{23} = 0, 30 ps time window), the measured process matrix fidelity reaches a value of 92.7(5) %. The real and imaginary parts of corresponding process matrix are depicted in Figure 3 e), f), respectively. Another commonly used metric is the average fidelity between input and output states. For this, we prepared additionally the input states ∣A⟩=(∣H⟩−∣V⟩)/2\lvert A\rangle= (\lvert H\rangle- \lvert V\rangle)/\sqrt{2} and ∣R⟩=(∣H⟩−i∣V⟩)/2\lvert R\rangle= (\lvert H\rangle- i \lvert V\rangle)/\sqrt{2} and measure the teleported state of photon ρ3\rho_3 for all six mutually unbiased input states. The resulting state teleportation fidelity F(ρ3,Y∣Ψ1in⟩)\mathcal{F}(\rho_3, Y\lvert\Psi_{1}^{\mathrm{in}}\rangle) is depicted in Figure 4 (τ12=τ23=0\tau_{12} = \tau_{23} = 0, 30 ps time window). High state teleportation fidelities of >90> 90 % are obtained for all six input states whereas values of about 97 % are achieved for the ∣H⟩\lvert H\rangle and ∣V⟩\lvert V\rangle input states which don’t require interference for successful teleportation. The average state teleportation fidelity across the six input states amounts to 94.2(5) % far above the classical limit of 2/3 [10, 32, 33, 34]. These high process matrix and average state teleportation fidelities surpass previous implementations of full photonic quantum teleportation with quantum emitters [15, 16, 17]. Furthermore, even the performance of other (partially) photonic teleportation schemes with atoms [10, 21], defect-centers in diamond [22] or spontaneous-parametric down-conversion sources [23, 24] is matched for our peak fidelity.

Figure 4. State teleportation fidelity F(ρ3,Y∣Ψ1in⟩)\mathcal{F}(\rho_3, Y\lvert\Psi_{1}^{\mathrm{in}}\rangle) at τ12=τ23=0\tau_{12} = \tau_{23} = 0 (30 ps time window) between input and output states for all six mutually unbiased input states. The average fidelity across the six states is 94.2(5) %.

Given the established understanding of the temporal evolution of the teleportation process, this can be harnessed to optimize the rate of faithful information transfer. In principle, it would be beneficial to increase the time window to consider all detected coincidences. However, this is connected to a reduction of the teleportation fidelity due to the source imperfections. Therefore, it is wise to consider the different time dependence along the two time axes for an optimized operation of quantum communication protocols. Here, we investigate exemplarily the dependence of the coincidence rate and teleportation fidelity on three different selections of time windows. 1) Firstly, a time window which is linearly increasing along both time axes, i.e. agnostic towards the underlying time evolution [16, 17]. 2) Secondly, we calculate the optimal selection of time bins that maximize the simulated teleportation fidelity for a given total window size (area of the 2D time space). In this way, the effect of the rapidly decreasing interference visibility for increasing τ12\tau_{12} can be diminished. 3) Finally, we perform the same optimization as in step two. However, additionally the application of Pauli gates on the raw data is included. This is performed by bases flips on the raw data (in this case it is only necessary in the XX and YY measurement bases) and can be implemented without any experimental overhead. This allows the achievement of high teleportation fidelity for the initial minima in the fidelity towards the static process matrix χ∣Ψ−⟩ideal\chi^{\mathrm{ideal}}_{\lvert\Psi^{-}\rangle} (see Figure 3 a), Figure 3c)) reducing the negative impact of the QD FSSFSS. A visualization of the time windows for the three scenarios can be found in the supplementary material. Figure 5 shows the resulting combination of the teleportation fidelity and three-photon coincidence rate for the three different scenarios. For small time windows, similar values are obtained for all methods. However, as a larger share of the maximum coincidence rate (320 cps for ∣Ψ12−⟩\lvert\Psi^{-}_{12}\rangle detection) is used, a significant advantage of methods 2) and 3) is apparent. For instance a fidelity of 80 % is accompanied by a coincidence rates of 12.0 cps with method 1) while employing method 3) boosts this number to 25.9 cps. This coincidence rate constitutes an improvement of more than two orders of magnitude compared to previous implementations of full-photonic quantum teleportation with remote emitters at comparable teleportation fidelity [16].

Figure 5. Measured time-integrated teleportation fidelity towards the static process matrix χ∣Ψ−⟩ideal\chi_{\left|\Psi^{-}\right\rangle}^{\mathrm{ideal}} and corresponding three-photon coincidence rate for three different selections of time windows. Purple dots: Along both time axes linearly increasing window. Orange dots: Optimized selection of time bins based on the theoretical modeling. Turquoise dots: Optimized selection of time bins based on the theoretical modeling plus basis flip (for X/YX/Y bases of the raw data) when F(χ∣Ψ−⟩simu,χ∣Ψ−⟩ideal)<F(χ∣Ψ−⟩simu,χ∣Ψ+⟩ideal)\mathcal{F}\left(\chi_{\left|\Psi^{-}\right\rangle}^{\mathrm{simu}},\chi_{\left|\Psi^{-}\right\rangle}^{\mathrm{ideal}}\right)<\mathcal{F}\left(\chi_{\left|\Psi^{-}\right\rangle}^{\mathrm{simu}},\chi_{\left|\Psi^{+}\right\rangle}^{\mathrm{ideal}}\right).

In order to achieve a higher teleportation fidelity for larger time windows, the two important source parameters, two-photon interference visibility between the remote sources and EPS state fidelity, must be improved for larger photon separation. Here, the interference visibility is the main limitation to the performance of the teleportation protocol. The incorporation of QD source into diode structures has shown to strongly decrease the linewidth broadening of remote emitters [35]. On the other hand, the non-zero FSSFSS still leads to a reduction of the teleportation fidelity even when applying method 3). In this context, multi-axial piezo-electric actuators can be used to eliminate any residual asymmetry of the QD confinement [20]. Consequently, the high maximum degree of entanglement achieved here can be preserved for the full wavepackage and the multi-axial piezo can be simultaneously used to achieve the wavelength matching of the two sources. Importantly, both techniques are fully compatible with the source design employed in this work.

Conclusion

We demonstrate the first implementation of quantum teleportation using remote quantum emitters directly at the telecom C-band. To enable this demonstration, the biexciton-exciton transitions of two semiconductor QDs are brought into resonance using a piezo-electric actuator enabling two-photon interference between photons from distinct QDs. The high three-photon coincidence rate of 320 cps (for ∣Ψ12−⟩\left|\Psi^{-}_{12}\right\rangle detection) allows to study and fully understand the time-dependence of the quantum teleportation process with remote QDs and its current limitations given the source imperfections. At the same time, the performance of the sources facilitates record values of the quantum teleportation fidelity of up to 92.7(5) % (towards the ideal quantum process matrix) and average state teleportation fidelity of up to 94.2(5) % (for six mutually unbiased input states) for full-photonic quantum teleportation with quantum emitters. The main limitation of the implementation in this work is the two-photon interference visibility between the two sources. Integration of the QDs into diode structures [35] could prospectively strongly improve the performance for larger coincidence windows. Given the understanding of the time dependence of the limitations of the teleportation process in the current implementation, we present an optimization of the classical data-processing, necessary for quantum teleportation protocols, to maximize the achievable teleportation fidelity and coincidence rate. This work opens the route towards the operation of large-scale fiber-based quantum networks utilizing remote sources in quantum teleportation [5] or quantum repeater [1, 2] protocols.

Funding. The authors acknowledge funding by the German Federal Ministry of Research, Technology and Space (BMFTR) via the projects QR.N (16KIS2207) and QCyber (16KIS2590K). Additional funding was also provided via the project EQSOTIC. This project was funded within the QuantERA II Programme that has received funding from the EU’s H2020 research and innovation programme under the GA No 101017733, and with funding organisation BMFTR (with project number 16KIS2060K).

Acknowledgment. We thank Tobias-Huber Loyola and Sven Höfling for the fabrication of the dielectric mirrors on the samples. We would like to gratefully acknowledge the help of Armando Rastelli for providing the piezo-electric actuator for wavelength tuning of the SPS and Bettina Frank for support for the fabrication of sample markers. We would like to thank Alessandro Laneve for fruitful discussion on MLE of QPT data. We thank SingleQuantum for their persistent support with the SNSPDs. Assistance of the chat bot Claude Sonnet 5.5 was used for the generation of a Blender file that was used to render the setup illustration in Figure 1 b).

References

  1. [1]P. van Loock, W. Alt, C. Becher, et al., “Extending Quantum Links: Modules for Fiber- and Memory-Based Quantum Repeaters,” Adv. Quantum Technol. 3, 1900141 (2020).arxiv.org/abs/1912.10123
  2. [2]K. Azuma, S. E. Economou, D. Elkouss, et al., “Quantum repeaters: From quantum networks to the quantum internet,” Rev. Mod. Phys. 95, 045006 (2023).DOI
  3. [3]C. H. Bennett, G. Brassard, C. Crépeau, et al., “Teleporting an unknown quantum state via dual classical and Einstein-Podolsky-Rosen channels,” Phys. Rev. Lett. 70, 1895–1899 (1993).pubmed.ncbi.nlm.nih.gov/10053414
  4. [4]D. Bouwmeester, J.-W. Pan, K. Mattle, et al., “Experimental quantum teleportation,” Nature 390, 575–579 (1997).
  5. [5]X.-S. Ma, T. Herbst, B. Scheidl, et al., “Quantum teleportation over 143 kilometres using active feed-forward,” Nature 489, 269–273 (2012).
  6. [6]F. Bussières, C. Clausen, A. Tiranov, et al., “Quantum teleportation from a telecom-wavelength photon to a solid-state quantum memory,” Nat. Photonics 8, 775–778 (2014).
  7. [7]S. L. N. Hermans, M. Pompili, H. K. C. Beukers, et al., “Qubit teleportation between non-neighbouring nodes in a quantum network,” Nature 605, 663–668 (2022).DOI
  8. [8]M. D. Barrett, J. Chiaverini, T. Schaetz, et al., “Deterministic quantum teleportation of atomic qubits,” Nature 429, 737–739 (2004).pubmed.ncbi.nlm.nih.gov/15201904
  9. [9]M. Riebe, H. Häffner, C. F. Roos, et al., “Deterministic quantum teleportation with atoms,” Nature 429, 734–737 (2004).pubmed.ncbi.nlm.nih.gov/15201903
  10. [10]S. Olmschenk, D. N. Matsukevich, P. Maunz, et al., “Quantum Teleportation Between Distant Matter Qubits,” Science 323, 486–489 (2009).DOI
  11. [11]W. Pfaff, B. J. Hensen, H. Bernien, et al., “Unconditional quantum teleportation between distant solid-state quantum bits,” Science 345, 532–535 (2014).DOI
  12. [12]W. Gao, P. Fallahi, E. Togan, et al., “Quantum teleportation from a propagating photon to a solid-state spin qubit,” Nat. Commun. 4, 2744 (2013).DOI
  13. [13]M. Reindl, D. Huber, C. Schimpf, et al., “All-photonic quantum teleportation using on-demand solid-state quantum emitters,” Sci. Adv. 4, 1–8 (2018).DOI
  14. [14]M. Anderson, T. Müller, J. Huwer, et al., “Quantum teleportation using highly coherent emission from telecom C-band quantum dots,” npj Quantum Inf. 6, 14 (2020).DOI
  15. [15]F. Basso Basset, F. Salusti, L. Schweickert, et al., “Quantum teleportation with imperfect quantum dots,” npj Quantum Inf. 7, 7 (2022).DOI
  16. [16]A. Laneve, G. Ronco, M. Beccaceci, et al., “Quantum teleportation with dissimilar quantum dots over a hybrid quantum network,” Nat. Commun. 16, 10028 (2025).DOI
  17. [17]T. Strobel, M. Vyleckа, I. Neureuther, et al., “Telecom-wavelength quantum teleportation using frequency-converted photons from remote quantum dots,” Nat. Commun. 16, 10027 (2025).DOI
  18. [18]R. Joos, M. Helal, M. Vylecka, et al., “Telecom C-Band Source of Triggered Polarization-Entangled Photon Pairs Combining High Coincidence Rates, Fidelities and Single-Photon Purity,” Adv. Quantum Technol. 9, e70317 (2026).DOI
  19. [19]M. Vylecka, R. Joos, B. Breiholz, et al., “Rack-Integrated Quantum Dot-Based Source of Single and Entangled Photons at Telecom C-Band,” Nanophotonics 15, e70353 (2026).
  20. [20]R. Trotta, J. Martín-Sánchez, J. S. Wildmann, et al., “Wavelength-tunable sources of entangled photons interfaced with atomic vapours,” Nat. Commun. 7, 10375 (2016).DOI
  21. [21]C. Nölleke, A. Neuzner, A. Reiserer, et al., “Efficient Teleportation Between Remote Single-Atom Quantum Memories,” Phys. Rev. Lett. 110, 140403 (2013).pubmed.ncbi.nlm.nih.gov/25166964
  22. [22]D. Ito, Y. Sekiguchi, R. Reyes, et al., “Robust transfer of a quantum state from an absorbed photon into a diamond spin,” Opt. Lett. 50, 5073 (2025).arxiv.org/abs/2505.09292
  23. [23]J. Akin, Y. Zhao, P. G. Kwiat, et al., “Faithful Quantum Teleportation via a Nanophotonic Nonlinear Bell State Analyzer,” Phys. Rev. Lett. 134, 160802 (2025).
  24. [24]X. Peng, L. Kong, and H. Lu, “Compact Non-Degenerate Entangled-Photon Source and Near-Infrared-To-Telecom Quantum Teleportation,” Adv. Quantum Technol. 8, e00574 (2025).DOI
  25. [25]M. A. Nielsen and I. L. Chuang, Quantum Computation and Quantum Information (Cambridge University Press, 2012), 10th ed.
  26. [26]A. J. Hudson, R. M. Stevenson, A. J. Bennett, et al., “Coherence of an Entangled Exciton-Photon State,” Phys. Rev. Lett. 99, 266802 (2007).DOI
  27. [27]B. Kambs and C. Becher, “Limitations on the indistinguishability of photons from remote solid state sources,” New J. Phys. 20, 115003 (2018).
  28. [28]R. Joos, M. Vylecka, T. Strobel, et al., “Overcoming the Hong-Ou-Mandel interference limitation for the second photon from a two-photon cascade,” arXiv:2609.24858 (2026).arxiv.org/abs/2609.24858
  29. [29]I. L. Chuang and M. A. Nielsen, “Prescription for experimental determination of the dynamics of a quantum black box,” J. Mod. Opt. 44, 2455–2467 (1997).
  30. [30]M. A. Nielsen, E. Knill, and R. Laflamme, “Complete quantum teleportation using nuclear magnetic resonance,” Nature 396, 52–55 (1998).
  31. [31]G. C. Knee, E. Bolduc, J. Leach, and E. M. Gauger, “Quantum process tomography via completely positive and trace-preserving projection,” Phys. Rev. A 98, 062336 (2018).DOI
  32. [32]M. Horodecki, P. Horodecki, and R. Horodecki, “General teleportation channel, singlet fraction, and quasidistillation,” Phys. Rev. A 60, 1888–1898 (1999).DOI
  33. [33]M. A. Nielsen, “A simple formula for the average gate fidelity of a quantum dynamical operation,” Phys. Lett. A 303, 249–252 (2002).DOI
  34. [34]S. Massar and S. Popescu, “Optimal Extraction of Information from Finite Quantum Ensembles,” Phys. Rev. Lett. 74, 1259–1263 (1995).
  35. [35]L. Zhai, G. N. Nguyen, C. Spinnler, et al., “Quantum interference of identical photons from remote GaAs quantum dots,” Nat. Nanotechnol. 17, 829–833 (2022).

Paper details

vlnc:W_6d62xe7s
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Claude Sonnet 5.5

View statement
Looking for related papers…
Contents