betaFeedback

WorksMathematics

Computation of Free Boundary Minimal Tori via Extremal Steklov Eigenvalues

Abstract

Fraser and Schoen showed that the first Steklov eigenfunctions of a metric maximizing the length-normalized first eigenvalue of a surface with boundary define a free boundary minimal immersion into a Euclidean ball. We develop a method for this extremal problem on surfaces of genus one with bb boundary components and use it to compute free boundary minimal tori for b∈{1,2,3,4,5,8}b \in \{1, 2, 3, 4, 5, 8\}. By uniformization, the problem is a nonsmooth maximization over the modulus of a flat torus, the centers and radii of bb removed disks, and a boundary weight. The eigenvalues are computed with doubly periodic layer potentials, all derivatives follow from a single formula for the underlying pencil of boundary integral operators, and the coalescence of eigenvalues at a maximizer is handled by a two-stage nonsmooth method. The Lagrange multiplier matrix that certifies first-order stationarity rescales the eigenfunctions into the free boundary minimal immersion. For b=1b=1, the supremum is the Fraser–Schoen bound 4π4π, attained by branched double covers of the disk; the embedded torus with connected boundary of Carlotto, Franz, and Schulz is a saddle point, which answers their question whether it maximizes the eigenvalue in the negative. For b≥2b \geq 2 the largest values correspond to free boundary minimal tori in \mathbb{B}^5 and \mathbb{B}^6; the surfaces of Folha, Pacard, and Zolotareva, two disks joined by a central neck and bb equatorial necks, are maximizers within their symmetry class but saddle points of the full problem, with values increasing toward 4π4π as b→∞b \to \infty.

Introduction

Extremal eigenvalue problems originate with Rayleigh’s conjecture that, among planar domains of fixed area, the disk minimizes the principal Dirichlet–Laplace eigenvalue. In the century since its proof by Faber and Krahn, many generalizations have been studied [22], and for problems without an explicit solution the subject has become a challenging computational one [45, 43, 2, 44, 6, 5, 1]. Two features of the computed optimizers recur: they are highly symmetric, and the extremal eigenvalue is multiple [40]. Multiplicity makes the objective nondifferentiable exactly at the points sought, so stationarity must be understood in Clarke’s sense and the optimization method must be built for it [47, 48, 35], either by general-purpose nonsmooth methods such as gradient sampling and nonsmooth quasi-Newton iterations [7, 36, 11] or, more efficiently, by methods that identify the active eigenvalue cluster and exploit the smooth structure of the problem on it [BIM23].

In an extremal geometric eigenvalue problem, the metric rather than the domain is the variable: one extremizes a normalized eigenvalue of the Laplace–Beltrami or Dirichlet-to-Neumann operator over the Riemannian metrics on a fixed surface. The derivative of an eigenvalue with respect to the metric is classical [12], and in a few cases the optimal metric is known and has a distinguished structure, such as the round sphere [23] or the equilateral torus [Nad96]. Where it has no such structure, computation is the available tool, and it faces two difficulties absent from the Euclidean setting: the space of conformal classes must be parametrized, with derivatives of the eigenvalue with respect to those parameters, and eigenvalue problems must be solved accurately on surfaces with nontrivial genus and boundary [26]. Computational work has so far treated closed surfaces of genus zero and one [25] and surfaces with boundary of genus zero [46]; extending it to surfaces with boundary and positive genus, where the modulus and the boundary weight enter together, was listed as open in [26]. This paper treats the first such case, the genus-one Steklov problem, whose maximizers are free boundary minimal surfaces.

Let (Σ,g)(\Sigma,g) be a smooth, compact, connected, orientable Riemannian surface of genus γ\gamma with b≥1b \ge1 boundary components. The Steklov eigenproblem is to find eigenpairs (σ,u)(\sigma,u) satisfying

Δgu=0in Σ,∂νgu=σuon ∂Σ.(1)\Delta_g u = 0 \quad\text{in } \Sigma,\qquad\partial_{\nu_g}u = \sigma u \quad\text{on } \partial\Sigma. \tag*{(1)}

The eigenvalues, counted with multiplicity, form a sequence 0=σ0<σ1≤σ2≤⋯→∞0 = \sigma_0 < \sigma_1 \le\sigma_2 \le\cdots\to\infty and equivalently are eigenvalues of the Dirichlet-to-Neumann operator [20]. Since σk\sigma_k scales like an inverse length, the scale-invariant quantity is

σ‾k(Σ,g):=σk(Σ,g)Lg(∂Σ),(2)\overline{\sigma}_k(\Sigma,g) := \sigma_k(\Sigma,g)L_g(\partial\Sigma), \tag*{(2)}

where Lg(∂Σ)L_g(\partial\Sigma) is the boundary length, and the extremal Steklov problem is

σk∗(γ,b):=sup⁡gσ‾k(Σ,g),(3)\sigma_k^*(\gamma,b) := \sup_g \overline{\sigma}_k(\Sigma,g), \tag*{(3)}

the supremum over all smooth metrics on Σ\Sigma; we write σ∗:=σ1∗\sigma^* := \sigma_1^*. The problem goes back to Weinstock [Wei54], who proved σ‾1≤2π\overline{\sigma}_1 \le2\pi for simply connected planar domains, with equality only for the disk. In general the supremum is finite, σ‾k≤2π(γ+b+k−1)\overline{\sigma}_k \le2\pi(\gamma+b+k-1) [15, 19, 28], and for k=1k=1 it is attained by a smooth metric [17, 38].

What makes the Steklov problem special among extremal geometric eigenvalue problems is a surprising connection between its maximizers and minimal surfaces, discovered by Fraser and Schoen [15, 17]. A free boundary minimal surface in the unit ball Bm\mathbb{B}^m is a critical point of area among surfaces with boundary on the sphere Sm−1\mathbb{S}^{m-1}, equivalently a minimal surface meeting Sm−1\mathbb{S}^{m-1} orthogonally along its boundary. The equatorial disk and the critical catenoid are the classical examples, and constructing such surfaces with prescribed topology is challenging [37]. If X:Σ→BmX:\Sigma\to\mathbb{B}^m is a free boundary minimal immersion and g=X∗gRmg=X^*g_{\mathbb{R}^m}, then the coordinate functions satisfy

ΔgX=0in Σ,∂νgX=Xon ∂Σ,(4)\Delta_g X = 0 \quad\text{in } \Sigma,\qquad\partial_{\nu_g}X = X \quad\text{on } \partial\Sigma, \tag*{(4)}

that is, they are Steklov eigenfunctions with eigenvalue one. Fraser and Schoen proved a converse: if gg maximizes σ‾1\overline{\sigma}_1, then, after scaling, a suitable basis of the first eigenspace defines a possibly branched free boundary minimal immersion of (Σ,g)(\Sigma,g) into a ball, conformal with respect to gg, whose dimension is the multiplicity mm of σ1\sigma_1; we call the map by first eigenfunctions the spectral map. The correspondence has become a source of existence theorems for free boundary minimal surfaces [17, 38 KS24, Kar+24]; read constructively, it turns eigenvalue optimization into a computational method, a maximizing metric with m=3m=3 yielding a free boundary minimal surface in B3\mathbb{B}^3. The normalized eigenvalue has a geometric meaning on that surface: by (4) and conformality, the boundary of the surface has length exactly $\overline{\sigma}_1 ({xref}Section 2.5`). The extremal problem thus seeks the free boundary minimal surface of the given topology with the longest boundary, among those whose coordinates are first eigenfunctions, and the bound σ‾1≤2π(γ+b)\overline{\sigma}_1 \le2\pi(\gamma+b) says that the boundary of a free boundary minimal torus with bb boundary curves whose coordinates are first eigenfunctions is at most b+1b+1 times as long as a great circle; the equatorial disk and the critical catenoid have boundary length $2\pi$ and 10.4710.47.

The optimization problem solved in this paper is the genus-one case of (3) with k=1k=1. By uniformization, a genus-one surface with bb boundary components is conformally a flat torus Tτ=C/(Z+τZ)\mathbb{T}_\tau= \mathbb{C}/(\mathbb{Z}+\tau\mathbb{Z}) with bb round disks removed, and since σ‾1\overline{\sigma}_1 is invariant under conformal changes of the metric in the interior, the metric is described by a positive weight ρ\rho on the boundary (§ 2.1). With log⁡ρ\log\rho truncated to NρN_{\rho} Fourier modes on each circle, the problem becomes

max⁡pσˉ1(p),p=(τ,c,r,α,β)∈RP,P:=2+3b+b(2Nρ+1),(5)\max_{\mathbf{p}} \bar{\sigma}_1(\mathbf{p}), \qquad\mathbf{p}=(\tau,\mathbf{c},\mathbf{r},\boldsymbol{\alpha},\boldsymbol{\beta})\in\mathbb{R}^{P}, \qquad P:=2+3b+b(2N_{\rho}+1), \tag*{(5)}

over the modulus τ\tau, the centers c\mathbf{c} and radii r\mathbf{r} of the disks and the Fourier coefficients (α,β)(\boldsymbol{\alpha},\boldsymbol{\beta}) of log⁡ρ\log\rho, subject to the disks being pairwise disjoint. Problem (5) is nonconvex, each evaluation of the objective requires solving a weighted Steklov eigenproblem on a finitely connected torus, and the objective is nonsmooth at the maximizers, where σ1\sigma_1 is expected to be multiple. The genus-zero analogue was treated by Oudet et al. [46], who combined the conformal uniformization of planar domains with circular holes, a boundary-weighted Steklov eigensolver, and nonsmooth optimization to compute genus-zero free boundary minimal surfaces with many boundary components. The passage to genus one introduces the modulus as an optimization variable and requires an accurate eigensolver on the torus; we use the layer-potential theory for finitely connected tori of Kim and Osting [32], which rests on the logarithmic conjugation theorem for harmonic functions on such domains [27].

Our contributions are methodological and computational. On the side of the method: (1) Formulation. We reduce the extremal problem to (5), whose geometric parameters (τ,c,r)(\tau,\mathbf{c},\mathbf{r}), with one center fixed, cover the 3b3b-dimensional moduli space of conformal structures (§ 2.1). (2) Eigensolver. The objective is evaluated with the doubly periodic layer potentials of [32], for which the weighted Steklov problem is a generalized eigenproblem for a pencil of boundary integral operators, discretized by a spectrally convergent Nyström method (§ 2.2 and § 3.1). (3) Derivatives. The left eigenvector of this pencil is the boundary trace of the eigenfunction. Consequently the derivative of σˉk\bar{\sigma}_k with respect to every component of p\mathbf{p}—weight, centers, radii, and modulus—is given by a single formula (Proposition 1) whose discretization is the exact derivative of the discrete eigenvalue; the Hadamard boundary integrals of [46] are recovered as special cases, and the modulus derivative, which is new, rests on differentiating the torus Green function through the heat equation for the theta function (Appendix § 7). (4) Nonsmooth optimization. We use gradient ascent while σ1\sigma_1 is simple and, once the first mm eigenvalues coalesce, refine the cluster by maximin steps in the manner of Overton [47] followed by quasi-Newton SQP steps along the active manifold in the manner of Bareilles et al. [BIM23] (§ 2.4). A computed critical configuration comes with a certificate of Clarke stationarity, a positive semidefinite matrix Λ\Lambda, and we show that this certificate is the surface (§ 2.5, Theorem 2): LρΛL_{\rho}\Lambda is the rescaling under which the spectral map sends ∂Σ\partial\Sigma to the unit sphere, and stationarity in the geometric parameters is the conformality of that map, because the parametrization covers the whole moduli space. The optimality conditions of the finite-dimensional problem are thus exactly the free boundary minimal surface conditions. (5) Verification. The immersion obtained from the certificate is verified a posteriori through residuals of the immersion, conformality, and sphere conditions (§ 2.6).

On the side of results, we apply the method for b∈{1,2,3,4,5,8}b\in\{1,2,3,4,5,8\} in the class of configurations with the holes on a common closed geodesic and a shared weight profile, and certify stationarity with respect to all parameters, the symmetry-breaking ones included (Table 1). For b=1b=1 the method finds a critical configuration with σˉ1∗≈11.33006466\bar{\sigma}_1^*\approx11.33006466 and τ∗≈i\tau^*\approx i at which the first three normalized eigenvalues coalesce; the surface in the first row of Figure 1 is an embedded genus-one free boundary minimal surface with connected boundary, its coordinate functions (top row of Figure 2) defining a map into B3\mathbb{B}^3 that satisfies the free boundary minimal surface conditions to the accuracy of Table 1. Whether such a surface exists was the first open question in the survey [37]; it was settled by the equivariant min–max construction of Carlotto et al. [8], which gives existence and a D2\mathbb{D}_2 symmetry, and the computation supplies its conformal type, its extremal value, a symmetry group of order eight containing D2\mathbb{D}_2, and the fact that its coordinate functions are first Steklov eigenfunctions. For b≥2b\ge2, we compute critical configurations with holes equispaced

Figure 1. The free boundary minimal tori in the unit ball computed in this paper, with b∈{1,2,3,4,5,8}b \in\{1,2,3,4,5,8\} boundary components (one per row; from left to right an oblique view, the view along the symmetry axis, and a side view), obtained as extremal configurations of the weighted Steklov problem on the torus with bb round holes (§ 4.4); the moduli τ∗\tau^* and extremal values are listed in Table 1.

Coordinate functions of the spectral map on the fundamental parallelogram

Figure 2. The coordinate functions X1⋆,X2⋆,X3⋆X_1^\star,X_2^\star,X_3^\star of the spectral map on Ω⋆\Omega^\star for b∈{1,2,3,4,5,8}b \in\{1,2,3,4,5,8\}, one row per bb, on the fundamental parallelogram of the computed modulus τ⋆\tau^\star with the holes in white (§ 4.2).

on the geodesic with equal radii and identical weights (Figure 3), whose surfaces (remaining rows of Figure 1 and Figure 2) consist of two nearly flat disks joined by a central catenoidal neck and by bb equatorial necks: the family constructed for large bb by Folha et al. [13] and for b=2b=2 by Franz et al. [14], here realized for b∈{2,3,4,5,8}b \in\{2,3,4,5,8\} together with their moduli and extremal values; the sheets approach each other as bb grows and are nearly coincident for b=8b=8 (last row of Figure 1). Along this family σˉ1⋆\bar{\sigma}_1^\star increases from 11.3301 for b=1b=1 to 12.5661 for b=8b=8, within 3×10−43 \times10^{-4} of 4π≈12.56644\pi\approx12.5664, the value of the doubly covered disk to which the surfaces converge, the modulus Sτ⋆\mathfrak{S}_{\tau^\star} grows, and the smallest eigenvalue of the certificate Λ⋆\Lambda^\star decreases toward zero as the two sheets approach each other (§ 4.2).

The extremal boundary weight $\rho^\star(\theta)$ for $b \in \{1,2,3,4,5,8\}$

Figure 3. The extremal boundary weight ρ⋆(θ)\rho^\star(\theta), normalized by its maximum, for b∈{1,2,3,4,5,8}b \in\{1,2,3,4,5,8\} (§ 4.2); the weight is shared by the bb components (§ 4.1).

None of these configurations is a maximizer of σˉ1\bar{\sigma}_1, and for b≤5b \le5 not even locally (§ 4.5). For b=1b=1 the supremum is the Fraser–Schoen bound 2π(γ+b)=4π2\pi(\gamma+b)=4\pi, attained on a family of conformal classes at which the certificate has rank two and the spectral map is a branched double cover of the equatorial disk rather than a surface. Carlotto et al. [8] asked whether their surface maximizes the normalized first Steklov eigenvalue: it is a saddle point, a maximizer within its symmetry class only (Figure 4). For b≥2b \ge2 the largest values we find are at configurations where five or six eigenvalues coalesce, so that the Fraser–Schoen correspondence produces free boundary minimal tori in B5\mathbb{B}^5 and B6\mathbb{B}^6 rather than B3\mathbb{B}^3; that the collinear surfaces are not the global maximizers also follows, for b≤5b \le5, from the genus-zero values of Oudet et al. [46] and the gluing inequality of Matthiesen and Petrides [38]. The maximizers are not the geometric objects of interest here, and the surfaces in B3\mathbb{B}^3 remain our focus.

Fourteen iterates of the unrestricted optimization

Figure 4. Fourteen iterates of the unrestricted optimization initialized at the b=1b=1 collinear configuration of Table 1, perturbed by 10−310^{-3} in a symmetry-breaking direction, ending at the maximizer, a doubly covered disk (§ 4.5); σˉ1\bar{\sigma}_1 and the eigenvalues of the multiplier Λ\Lambda are given above each column. From top to bottom: the spectral map in three views with a fixed camera and scale, and the weight ρ/max⁡ρ\rho/\max\rho. Red and gray distinguish the two sides of the surface. Black dots mark the images of the three half-periods relative to the hole center, which are the ramification points at the maximizer.

Outline. Section 2 develops the method at the continuous level, from the conformal reduction and the eigensolver through the derivatives and the optimization to the stationarity certificate and the verification criteria. Section 3 collects discretization and implementation details, Section 4 reports the computations and the resulting surfaces, and we conclude in Section 5 with a discussion. Appendix A derives the modulus derivative of the torus Green function and Appendix B describes the close-evaluation procedure for the layer potentials.

Notation

For n∈Nn \in\mathbb{N} we write [n]:={1,…,n}[n] := \{1,\ldots,n\}. Throughout, kk indexes eigenvalues, ℓ∈[b]\ell\in[b] boundary components, nn Fourier modes, jj components of a vector (of pp or of the spectral map), and ii quadrature nodes; pp is a generic component of pp and ∂p\partial_p the partial derivative with respect to it; (σk,uk)(\sigma_k,u_k) is a Steklov eigenpair and σˉk\bar{\sigma}_k the length-normalized eigenvalue; mm is the multiplicity of the first eigenvalue at a target configuration; NℓN_\ell is the number of quadrature nodes on Γℓ\Gamma_\ell and N:=∑ℓ∈[b]NℓN := \sum_{\ell\in[b]} N_\ell; and a superscript ⋆\star marks quantities at a computed critical configuration, e.g., τ⋆\tau^\star, Ω⋆\Omega^\star, σˉ1⋆\bar{\sigma}_1^\star.

Formulation and computational method

This section develops the components of the computational method at the continuous level; discretization and implementation details are collected in § 3.

Extremal Steklov problem and conformal reduction

References

  1. [1]E. Akhmetgaliyev, C.-Y. Kao, and B. Osting. “Computational methods for extremal Steklov problems”. SIAM Journal on Control and Optimization 55.2 (2017), pp. 1226–1240. DOI: 10.1137/16M1067263.DOI
  2. [2]P. R. S. Antunes and P. Freitas. “Numerical optimization of low eigenvalues of the Dirichlet and Neumann Laplacians”. Journal of Optimization Theory and Applications 154.1 (2012), pp. 235–257. DOI: 10.1007/s10957-011-9983-3.DOI
  3. [4]A. H. Barnett. “Evaluation of layer potentials close to the boundary for Laplace and Helmholtz problems on analytic planar domains”. SIAM Journal on Scientific Computing 36.2 (2014), A427–A451. DOI: 10.1137/120900253.DOI
  4. [5]B. Bogosel, D. Bucur, and A. Giacomini. “Optimal shapes maximizing the Steklov eigenvalues”. SIAM Journal on Mathematical Analysis 49.2 (2017), pp. 1645–1680. DOI: 10.1137/16M1075260.DOI
  5. [6]B. Bogosel and É. Oudet. “Qualitative and numerical analysis of a spectral problem with perimeter constraint”. SIAM Journal on Control and Optimization 54.1 (2016), pp. 317–340. DOI: 10.1137/140999530.DOI
  6. [7]J. V. Burke, A. S. Lewis, and M. L. Overton. “A robust gradient sampling algorithm for nonsmooth, nonconvex optimization”. SIAM Journal on Optimization 15.3 (2005), pp. 751–779. DOI: 10.1137/030601296.DOI
  7. [8]A. Carlotto, G. Franz, and M. B. Schulz. “Free boundary minimal surfaces with connected boundary and arbitrary genus”. Cambridge Journal of Mathematics 10.4 (2022), pp. 835–857. DOI: 10.4310/CJM.2022.v10.n4.a3.DOI
  8. [9]H. Chen and B. Osting. Supplementary data for “Computation of free boundary minimal tori via extremal Steklov eigenvalues”. https://github.com/haoyuchenmath/Free-boundary-minimal-surfaces. 2026.arxiv.org/abs/2610.25787
  9. [11]F. E. Curtis, T. Mitchell, and M. L. Overton. “A BFGS-SQP method for nonsmooth, nonconvex, constrained optimization and its evaluation using relative minimization profiles”. Optimization Methods and Software 32.1 (2017), pp. 148–181. DOI: 10.1080/10556788.2016.1208749.DOI
  10. [12]A. El Soufi and S. Ilias. “Laplacian eigenvalue functionals and metric deformations on compact manifolds”. Journal of Geometry and Physics 58.1 (2008), pp. 89–104. DOI: 10.1016/j.geomphys.2007.09.008.DOI
  11. [13]A. Folha, F. Pacard, and T. Zolotareva. “Free boundary minimal surfaces in the unit 3-ball”. Manuscripta Mathematica 154.3–4 (2017), pp. 359–409. DOI: 10.1007/s00229-017-0924-9.DOI
  12. [14]G. Franz, D. Ketover, and M. B. Schulz. Genus one critical catenoid. 2024. arXiv: 2409.12588 [math.DG].arxiv.org/abs/2409.12588
  13. [15]A. Fraser and R. Schoen. “The first Steklov eigenvalue, conformal geometry, and minimal surfaces”. Advances in Mathematics 226.5 (2011), pp. 4011–4030. DOI: 10.1016/j.aim.2010.11.007.DOI
  14. [16]A. Fraser and R. Schoen. “Minimal surfaces and eigenvalue problems”. In: Geometric Analysis, Mathematical Relativity, and Nonlinear Partial Differential Equations. Ed. by M. Ghomi, J. Li, J. McCuan, V. Oliker, F. Schulze, and G. Weinstein. Vol. 599. Contemporary Mathematics. Providence, RI: American Mathematical Society, 2013, pp. 105–121. DOI: 10.1090/conm/599/11927.DOI
  15. [17]A. Fraser and R. Schoen. “Sharp eigenvalue bounds and minimal surfaces in the ball”. Inventiones Mathematicae 203.3 (2016), pp. 823–890. DOI: 10.1007/s00222-015-0604-x.DOI
  16. [18]A. Fraser and R. Schoen. “Some results on higher eigenvalue optimization”. Calculus of Variations and Partial Differential Equations 59.5 (2020), Paper No. 151. DOI: 10.1007/s00526-020-01802-9.DOI
  17. [19]A. Girouard and I. Polterovich. “Upper bounds for Steklov eigenvalues on surfaces”. Electronic Research Announcements in Mathematical Sciences 19 (2012), pp. 77–85. DOI: 10.3934/era.2012.19.77.DOI
  18. [20]A. Girouard and I. Polterovich. “Spectral geometry of the Steklov problem (survey article)”. Journal of Spectral Theory 7.2 (2017), pp. 321–359. DOI: 10.4171/JST/164.DOI
  19. [21]Z.-X. He and O. Schramm. “Fixed points, Koebe uniformization and circle packings”. Annals of Mathematics 137.2 (1993), pp. 369–406. DOI: 10.2307/2946541.DOI
  20. [22]A. Henrot. Extremum Problems for Eigenvalues of Elliptic Operators. Frontiers in Mathematics. Basel: Birkhäuser, 2006. DOI: 10.1007/3-7643-7706-2.DOI
  21. [23]J. Hersch. “Quatre propriétés isopérimétriques de membranes sphériques homogènes”. Comptes Rendus de l’Académie des Sciences, Série A 270 (1970), A1645–A1648.
  22. [24]J. Jost. Compact Riemann Surfaces: An Introduction to Contemporary Mathematics. 3rd ed. Universitext. Berlin, Heidelberg: Springer, 2006. DOI: 10.1007/978-3-540-33067-7.DOI
  23. [25]C.-Y. Kao, R. Lai, and B. Osting. “Maximization of Laplace–Beltrami eigenvalues on closed Riemannian surfaces”. ESAIM: Control, Optimisation and Calculus of Variations 23.2 (2017), pp. 685–720. DOI: 10.1051/cocv/2016008.DOI
  24. [26]C.-Y. Kao, B. Osting, and É. Oudet. “Computational approaches for extremal geometric eigenvalue problems”. In: Numerical Control: Part B. Ed. by E. Trélat and E. Zuazua. Vol. 24. Handbook of Numerical Analysis. Amsterdam: Elsevier, 2023, pp. 377–406. DOI: 10.1016/bs.hna.2022.08.001.DOI
  25. [27]C.-Y. Kao, B. Osting, and É. Oudet. “Harmonic functions on finitely connected tori”. SIAM Journal on Numerical Analysis 61.6 (2023), pp. 2795–2812. DOI: 10.1137/23M1569897.DOI
  26. [28]M. Karpukhin. “Bounds between Laplace and Steklov eigenvalues on nonnegatively curved manifolds”. Electronic Research Announcements in Mathematical Sciences 24 (2017), pp. 100–109. DOI: 10.3934/era.2017.24.011.DOI
  27. [30]M. Karpukhin and A. Métras. “Laplace and Steklov extremal metrics via n-harmonic maps”. The Journal of Geometric Analysis 32.5 (2022), Paper No. 154. DOI: 10.1007/s12220-022-00891-6.DOI
  28. [32]B. Kim and B. Osting. “Layer potential methods for doubly periodic harmonic functions”. SIAM Journal on Numerical Analysis 64.5 (2026), pp. 1861–1890. DOI: 10.1137/25M1772836.DOI
  29. [34]R. Kress. Linear Integral Equations. 3rd ed. Vol. 82. Applied Mathematical Sciences. New York: Springer, 2014. DOI: 10.1007/978-1-4614-9593-2.DOI
  30. [35]A. S. Lewis and M. L. Overton. “Eigenvalue optimization”. Acta Numerica 5 (1996), pp. 149–190. DOI: 10.1017/S0962492900002646.DOI
  31. [36]A. S. Lewis and M. L. Overton. “Nonsmooth optimization via quasi-Newton methods”. Mathematical Programming 141.1–2 (2013), pp. 135–163. DOI: 10.1007/s10107-012-0514-2.DOI
  32. [37]M. M.-c. Li. “Free boundary minimal surfaces in the unit ball: recent advances and open questions”. In: Proceedings of the International Consortium of Chinese Mathematicians, 2017. Ed. by S.-Y. Cheng, L. Ji, S.-T. Yau, and X.-P. Zhu. Somerville, MA: International Press, 2020, pp. 401–435. arXiv: 1907.05053 [math.DG].arxiv.org/abs/1907.05053
  33. [38]H. Matthiesen and R. Petrides. Free boundary minimal surfaces of any topological type in Euclidean balls via shape optimization. 2020. arXiv: 2004.06051 [math.DG].arxiv.org/abs/2004.06051
  34. [40]N. S. Nadirashvili. “Multiple eigenvalues of the Laplace operator”. Mathematics of the USSR-Sbornik 61.1 (1988), pp. 225–238. DOI: 10.1070/SM1988v061n01ABEH003204.DOI
  35. [41]J. Nocedal and S. J. Wright. Numerical Optimization. 2nd ed. Springer Series in Operations Research and Financial Engineering. New York: Springer, 2006. DOI: 10.1007/978-0-387-40065-5.DOI
  36. [42]F. W. J. Olver, A. B. Olde Daalhuis, D. W. Lozier, B. I. Schneider, R. F. Boisvert, C. W. Clark, B. R. Miller, B. V. Saunders, H. S. Cohl, and M. A. McClain, eds. NIST Digital Library of Mathematical Functions. Release 1.2.8 of 2026-09-15. National Institute of Standards and Technology, 2026.
  37. [43]B. Osting. “Optimization of spectral functions of Dirichlet–Laplacian eigenvalues”. Journal of Computational Physics 229.22 (2010), pp. 8578–8590. DOI: 10.1016/j.jcp.2010.07.040.DOI
  38. [44]B. Osting and C.-Y. Kao. “Minimal convex combinations of sequential Laplace–Dirichlet eigenvalues”. SIAM Journal on Scientific Computing 35.3 (2013), B731–B750. DOI: 10.1137/120881865.DOI
  39. [45]É. Oudet. “Numerical minimization of eigenmodes of a membrane with respect to the domain”. ESAIM: Control, Optimisation and Calculus of Variations 10.3 (2004), pp. 315–330. DOI: 10.1051/cocv:2004011.DOI
  40. [46]É. Oudet, C.-Y. Kao, and B. Osting. “Computation of free boundary minimal surfaces via extremal Steklov eigenvalue problems”. ESAIM: Control, Optimisation and Calculus of Variations 27 (2021), Paper No. 34. DOI: 10.1051/cocv/2021033.DOI
  41. [47]M. L. Overton. “On minimizing the maximum eigenvalue of a symmetric matrix”. SIAM Journal on Matrix Analysis and Applications 9.2 (1988), pp. 256–268. DOI: 10.1137/0609021.DOI
  42. [48]M. L. Overton and R. S. Womersley. “Optimality conditions and duality theory for minimizing sums of the largest eigenvalues of symmetric matrices”. Mathematical Programming 62.2 (1993), pp. 321–357. DOI: 10.1007/BF01585173.DOI
  43. [50]W. Zeng, X. Yin, M. Zhang, F. Luo, and X. Gu. “Generalized Koebe’s method for conformal mapping multiply connected domains”. In: 2009 SIAM/ACM Joint Conference on Geometric and Physical Modeling. New York: Association for Computing Machinery, 2009, pp. 89–100. DOI: 10.1145/1629255.1629267.DOI

Paper details

vlnc:W_6fzy7zeb
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 2

downloads · 2

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Claude, ChatGPT

View statement
Looking for related papers…
Contents