betaFeedback

WorksPhysics and Astronomy

Photonuclear reactions nat^{nat}Ni(γγ,xn)57^{57}Ni and nat^{nat}Ni(γγ,xn)56^{56}Ni in the energy range Eγmax_{γmax} = 35...94 MeV

Abstract

The total bremsstrahlung flux-averaged cross-sections <σσ(Eγmax_{γmax})> for the photonuclear reactions nat^{nat}Ni(γγ,xn)57^{57}Ni and nat^{nat}Ni(γγ,xn)56^{56}Ni have been measured in the range of end-point energies Eγmax_{γmax} = 35...94 MeV. The experiments were performed with the beam from the NSC KIPT electron linear accelerator LUE-40 with the use of the activation and off-line γγ-ray spectrometric technique. The calculation of the flux-average cross-sections <σσ(Eγmax_{γmax})>th_{th} was carried out using the partial cross-section values σσ(E) computed with the TALYS1.95 code and bremsstrahlung γγ-flux calculated by GEANT4.9.2. The experimental results are compared with theoretical calculations and data from the literature. The obtained <σσ(Eγmax_{γmax})> values expand the energy range of previously known experimental data.

INTRODUCTION

Data on the cross-sections of photonuclear reactions with the yield of multiple nucleons are in demand in a variety of applications, for example, photoneutron generation, space nucleosynthesis, in the creation of nuclear installations based on subcritical systems (ADS) controlled by electron or proton accelerators, etc. At present, ADS systems are considered promising facilities for the disposal of radioactive waste from nuclear energy (transmutation of minor actinides [1] and burning of long-lived fission fragments), as well as potential sources for the production of electricity [2, 3]. Since such facilities operate in a subcritical mode, it is very important to know the flux of additional neutrons that are formed as a result of many-particle photoneutron reactions on the nuclei of structural materials (Al, Fe, Zr, Nb, etc.) inside of the ADS system. This will make it possible to more correctly estimate the total neutron flux in the core of a subcritical assembly, which, in turn, is related to the safety of operation of such nuclear installations.

Most of the data on the cross-sections of photonuclear reactions, important for many fields of science and technology, as well as for various data files (EXFOR, RIPL, ENDF, etc.), were obtained in experiments using quasi-monoenergetic annihilation photons in the energy range of the giant dipole resonance (GDR).

Photonuclear experiments with a large number of particles in the output channel require the use of high-intensity gamma-ray beams. Today, a good alternative is the use of high-energy electron bremsstrahlung passed through the converter. The use of bremsstrahlung significantly complicates the procedure for determining the characteristics of nuclear reactions. First of all, it is necessary to calculate the density of bremsstrahlung γ\gamma-quanta flux corresponding to the actual experimental conditions. In experiments, it is possible to measure the integral characteristics of the reactions. It required additional mathematical processing of the results. Nevertheless, bremsstrahlung of electrons is an important instrument of modern nuclear physics despite the difficulties in the determination of the reaction’s cross-sections.

Interest in studies of photonuclear reactions with Ni isotopes is due to several reasons. Nickel is an important structural and surface coating material, used in accelerator nuclear technology and ADS [3]. Nickel is also used as a target material for the medical isotopes or radiopharmaceuticals, and radioactive sources.

In the GDR region, the study of photonuclear cross-sections on nickel isotopes was carried out in several works [4, 5, 6, 7]. At higher energies, experimental studies of photonuclear reactions on stable nickel isotopes were carried out, for example, in a recent work [8]. In this work, using the γ\gamma-activation method, the flux-avarage photonuclear reaction cross-sections natNi(γ,xn)56,57Ni^{\mathrm{nat}}\mathrm{Ni}(\gamma,xn)^{56,57}\mathrm{Ni} and natNi(γ,pxn)55,56,57,58Co^{\mathrm{nat}}\mathrm{Ni}(\gamma,pxn)^{55,56,57,58}\mathrm{Co} were measured for end-point bremsstrahlung energies of 55, 59, 61, and 65 MeV.

This paper presents the total bremsstrahlung flux-averaged cross-sections ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle for the 57Ni^{57}\mathrm{Ni} and 56Ni^{56}\mathrm{Ni} production in photonuclear reactions on natural nickel measured in the range of end-point bremsstrahlung energies Eγmax⁡=35…94E_{\gamma\max}=35\ldots94 MeV. The obtained data are compared both with the theoretical calculation performed using partial cross-sections σ(E)\sigma(E) from the TALYS1.95 [9] code and with the data available in the literature [8].

EXPERIMENTAL PROCEDURE

EXPERIMENTAL PROCEDURE OF THE RESIDUAL γ\gamma-ACTIVITY OF THE IRRADIATED SAMPLE

Experimental studies of nickel photodisintegration cross-sections have been carried out through measurements of the residual γ\gamma-activity of the irradiated samples, which enabled one to obtain simultaneously the data from different channels of photonuclear reactions. This technique is well known and has been described in a variety of papers concerned with the investigation of multiparticle photonuclear reactions, e.g., on the nuclei 27^{27}Al [10], 93^{93}Nb [11, 12, 13], 181^{181}Ta [14, 15].

The schematic block diagram of the experiment is presented in Figure 1. The γ\gamma-ray bremsstrahlung beam was generated by means of the NSC KIPT electron linac LUE-40 RDC “Accelerator” [16, 17]. Electrons of the initial energy EeE_e were incident on the target-converter made from 1.05 mm thick natural tantalum plate, measuring 20 by 20 mm. To remove electrons from the bremsstrahlung γ\gamma-flux, a cylindrical aluminum absorber, 100 mm in diameter and 150 mm in length, was used. The targets of diameter 8 mm, placed in the aluminum capsule, were arranged behind the Al-absorber on the electron beam axis. For transporting the targets to the place of irradiation and back for induced activity registration, the pneumatic tube transfer system was used. After the irradiated targets are delivered to the measuring room, the samples are extracted from the aluminum capsule and are transferred one by one to the detector for the measurements. Taking into account the time of target delivery and extraction from the capsule, the cooling time for the sample under study took no more than 2 minutes.

Schematic block diagram of the experiment

Figure 1. Schematic block diagram of the experiment. The upper part shows the measuring room, where the exposed target (red color) and the target-monitor (blue color) are extracted from the capsule and are arranged by turn before the HPGe detector for induced γ\gamma-activity measurements. The lower part shows the accelerator LUE-40, the Ta-converter, Al-absorber, exposure reaction chamber

The induced gamma-activity of the irradiated targets was registered by the semiconductor HPGe detector Canberra GC-2018 with the resolutions of 0.8 and 1.8 keV (FWHM) for the energies Eγ=122E_\gamma= 122 and 1332 keV, respectively. Its efficiency was 20% relative to the NaI(Tl) detector, 3 inches in diameter and 3 inches in thickness. The absolute registration efficiency of the HPGe detector was calibrated with a standard set of gamma-ray radiation sources: 22^{22}Na, 60^{60}Co, 133^{133}Ba, 137^{137}Cs, 152^{152}Eu, 241^{241}Am.

The bremsstrahlung spectra of electrons were calculated by using the GEANT4.9.2 code [18] with due regard for the real geometry of the experiment, where consideration was given to spatial and energy distributions of the electron beam. The program code GEANT4.9.2 allows one to perform calculations taking properly into account all physical processes for the case of an amorphous target. In addition, the bremsstrahlung gamma fluxes were monitored by the yield of the 100^{100}Mo(γ,n)99(\gamma,n)^{99}Mo reaction. For this purpose, the natural molybdenum target-witness, placed close by the target under study, was simultaneously exposed to radiation.

Natural Ni and Mo targets were used in the experiment. The isotopic composition of nickel is a mixture of five stable isotopes with an isotopic abundance: 58^{58}Ni – 0.68077, 60^{60}Ni – 0.26223, 61^{61}Ni – 0.0114, 62^{62}Ni – 0.03634, 64^{64}Ni – 0.00926. For 100^{100}Mo in our calculations, we have used the percentage value of isotope abundance equal to 9.63% (see ref. [18]). The admixture of other elements in the targets did not exceed 0.1% by weight.

In the experiment, the nat^{nat}Ni and nat^{nat}Mo samples were exposed to radiation at end-point bremsstrahlung energies Emax⁡E_{\max} ranging from 35 to 94 MeV with an energy step of ~ 5 MeV. The masses mNim_{\mathrm{Ni}} and mMom_{\mathrm{Mo}} targets were, respectively, ~ 80 and ~ 60 mg. The time of irradiation tirrt_{\mathrm{irr}} and the time of residual γ\gamma-activity spectrum measurement tmeast_{\mathrm{meas}} were 30 min for each energy Emax⁡E_{\max} value.

Table 1 lists the nuclear spectroscopic data of the radionuclide’s reactions according to the data from [19]: EthE_{\mathrm{th}} denotes reaction thresholds; T1/2T_{1/2} – the half-life period of the nuclei-products, EγE_\gamma are the energies of the γ\gamma-lines under study and their intensities IγI_\gamma. To process the spectra and estimate the full absorption peak areas ΔA\Delta A, the program InterSpec V.1.0.8 [20] was used.

There are two frames of the typical gamma-spectrum from reaction products of the nickel target in the EγE_\gamma range from 100 to 600 keV and 1000 to 1500 keV shown in Figure 2.

Figure 2. Fragments of the γ\gamma-radiation spectrum of nat^{nat}Ni, measured for the parameters: tirrt_{\mathrm{irr}} and tmeas=1800t_{\mathrm{meas}} = 1800 s, tcool=2391t_{\mathrm{cool}} = 2391 s, Emax⁡=85.35E_{\max} = 85.35 MeV, m=82.105m = 82.105 mg. Spectrum fragments ranging from 100 to 600 keV and 1000 to 1500 keV are shown

The bremsstrahlung gamma flux monitoring against the 100Mo(γ,n)99Mo{}^{100}\mathrm{Mo}(\gamma,n){}^{99}\mathrm{Mo} reaction yield was performed by comparing the experimentally obtained flux-average cross-section ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle values with the computation data. To determine the experimental ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle values we have used the full absorption peak area ΔA\Delta A value for the Eγ=739.50 keVE_{\gamma}=739.50\ \mathrm{keV} γ\gamma-line and the absolute intensity Iγ=12.13%I_{\gamma}=12.13\% (see Table 1). The theoretical values of the average cross-section ⟨σ(Eγmax⁡)⟩th\langle\sigma(E_{\gamma\max})\rangle_{\mathrm{th}} were calculated using the cross-sections σ(E)\sigma(E) in the TALYS1.95 code with the default options. The normalization (monitoring) factor kmonitork_{\mathrm{monitor}}, derived from the ratios of ⟨σ(Eγmax⁡)⟩th\langle\sigma(E_{\gamma\max})\rangle_{\mathrm{th}} to ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle, represents the deviation of the GEANT4.9.2-computed bremsstrahlung γ\gamma-flux from the real flux falling on the target. The determined kmonitork_{\mathrm{monitor}} values were used for normalizing the cross-sections for the studied photonuclear reactions. The monitoring procedure has been detailed in [11, 12].

NuclideT1/2T_{1/2}EγE_\gamma, keVIγI_\gamma, %
56^{56}Ni6.077±0.012 d158.3898.8±0.1
57^{57}Ni35.60±0.06 h127.1616.7±0.3
57^{57}Ni35.60±0.06 h1337.6381.7±1.6
100^{100}Mo65.94±0.01 h739.5012.13±0.12

Table 1. Nuclear spectroscopic data on the studied nuclide-products from the database [19]

Experimental accuracy of average cross-sections ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle

The uncertainty in measurements of experimental values of the flux-average cross-sections ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle was determined as a quadratic sum of statistical and systematical errors. The statistical error in the observed γ\gamma-activity is mainly due to statistics calculation in the full absorption peak of the corresponding γ\gamma-line, which varies within 1 to 10%. This error varies depending on the γ\gamma-line intensity and the background conditions of spectrum measurements. The intensity of the γ\gamma-line depends on the detection efficiency ε\varepsilon, the half-life period T1/2T_{1/2}, and the absolute intensity IγI_{\gamma}. The background is generally governed by the contribution of the Compton scattering of quanta.

The systematical errors are due to the following uncertainties: 1) time of exposure and the electron current ∼0.5%\sim0.5\%; 2) γ\gamma-ray registration efficiency of the detector ∼2\sim2-3%3\%, which is generally associated with the gamma radiation source error and the choice of the approximation curve; 3) the half-life period T1/2T_{1/2} of the reaction products and the absolute intensity IγI_{\gamma} of the analyzed γ\gamma-quanta were up to 4.7%, as is noted in Table 1 according to the data from [19]; 4) normalization of the experimental data to the yield of the monitoring reaction 100Mo(γ,n)99Mo{}^{100}\mathrm{Mo}(\gamma,n){}^{99}\mathrm{Mo} made up to 5%. It should be noted that the systematic error in yield monitoring of the 100Mo(γ,n)99Mo{}^{100}\mathrm{Mo}(\gamma,n){}^{99}\mathrm{Mo} reaction stems from three unavoidable errors, each running to ∼1%\sim1\%. These are the unidentified isotopic composition of natural molybdenum (100Mo{}^{100}\mathrm{Mo} isotope abundance equal to 9.63%), the uncertainty in the γ\gamma-line intensity used, IγI_{\gamma}, and the statistical error in the determination of the area under the normalizing γ\gamma-line peak.

Thus, the statistical and systematical errors are the variables, which differ for the investigated reactions. The total uncertainties of the experimental data are given in Figure 4 and Figure 5, and Table 3 and Table 4 with experimental results.

Bremsstrahlung flux-averaged cross-section for the natNi(gamma,xn)56Ni reaction

Figure 4. The bremsstrahlung flux-averaged cross-section ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle for the reactions natNi(γ,xn)56(\gamma,xn)^{56}Ni: TALYS1.95 calculation – blue curve; experimental values: blue circles – our data Eγ=158.38E_{\gamma}=158.38 keV, black empty circles – Naik, 2018 [8]

Bremsstrahlung flux-averaged cross-section for the natNi(gamma,xn)57Ni reaction

Figure 5. The bremsstrahlung flux-averaged cross-section ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle for the reactions natNi(γ,xn)57(\gamma,xn)^{57}Ni: TALYS1.95 calculation – blue curve; experimental values: red empty circles – our data for Eγ=127.16E_{\gamma}=127.16 keV, blue circles – our data for Eγ=1377.63E_{\gamma}=1377.63 keV, black empty circles – Naik, 2018 [8]

Eγmax⁡E_{\gamma\max}, MeVnatNi(γ,xn)56Ni{}^{\mathrm{nat}}\mathrm{Ni}(\gamma,xn){}^{56}\mathrm{Ni}58Ni(γ,2n)56Ni{}^{58}\mathrm{Ni}(\gamma,2n){}^{56}\mathrm{Ni}
35.550.199 ± 0.0280.293 ± 0.041
40.100.238 ± 0.0300.350 ± 0.044
44.650.167 ± 0.0190.250 ± 0.029
50.200.152 ± 0.0180.224 ± 0.026
54.850.151 ± 0.0170.221 ± 0.024
60.550.140 ± 0.0170.205 ± 0.025
65.050.130 ± 0.0150.191 ± 0.022
70.100.108 ± 0.0110.159 ± 0.017
75.100.100 ± 0.0130.147 ± 0.019
79.950.108 ± 0.0120.159 ± 0.018
85.350.105 ± 0.0120.154 ± 0.018
89.250.091 ± 0.0120.134 ± 0.018
94.000.118 ± 0.0150.174 ± 0.021

Table 3. Experimental flux-average cross-section ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle for the natNi(γ,xn)56Ni{}^{\mathrm{nat}}\mathrm{Ni}(\gamma,xn){}^{56}\mathrm{Ni} and 58Ni(γ,2n)56Ni{}^{58}\mathrm{Ni}(\gamma,2n){}^{56}\mathrm{Ni} reactions

Eγmax⁡E_{\gamma\max}, MeVnatNi(γ,xn)57Ni{}^{\mathrm{nat}}\mathrm{Ni}(\gamma,xn){}^{57}\mathrm{Ni}58Ni(γ,n)57Ni{}^{58}\mathrm{Ni}(\gamma,n){}^{57}\mathrm{Ni}
35.553.83 ± 0.38<br><em>3.94 ± 0.39</em>5.62 ± 0.56<br><em>5.79 ± 0.58</em>
40.104.66 ± 0.47<br><em>4.80 ± 0.48</em>6.85 ± 0.68<br><em>7.04 ± 0.70</em>
44.653.15 ± 0.31<br><em>3.23 ± 0.32</em>4.63 ± 0.46<br><em>4.74 ± 0.47</em>
50.203.07 ± 0.31<br><em>3.19 ± 0.32</em>4.50 ± 0.45<br><em>4.69 ± 0.47</em>
54.853.25 ± 0.32<br><em>3.35 ± 0.33</em>4.77 ± 0.48<br><em>4.92 ± 0.49</em>
60.553.10 ± 0.31<br><em>3.22 ± 0.33</em>4.55 ± 0.45<br><em>4.72 ± 0.48</em>
65.052.78 ± 0.28<br><em>2.98 ± 0.30</em>4.08 ± 0.41<br><em>4.37 ± 0.43</em>
70.102.63 ± 0.26<br><em>2.67 ± 0.27</em>3.86 ± 0.38<br><em>3.92 ± 0.39</em>
75.102.51 ± 0.25<br><em>2.67 ± 0.27</em>3.68 ± 0.37<br><em>3.92 ± 0.39</em>
79.952.57 ± 0.26<br><em>2.80 ± 0.28</em>3.77 ± 0.38<br><em>4.10 ± 0.41</em>
85.352.55 ± 0.25<br><em>2.74 ± 0.27</em>3.74 ± 0.37<br><em>4.02 ± 0.40</em>
89.252.26 ± 0.23<br><em>2.49 ± 0.25</em>3.31 ± 0.33<br><em>3.65 ± 0.36</em>
94.002.53 ± 0.25<br><em>2.60 ± 0.26</em>3.71 ± 0.37<br><em>3.81 ± 0.38</em>

Table 4. Experimental flux-average cross-section ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle for the natNi(γ,xn)57Ni{}^{\mathrm{nat}}\mathrm{Ni}(\gamma,xn){}^{57}\mathrm{Ni} and 58Ni(γ,n)57Ni{}^{58}\mathrm{Ni}(\gamma,n){}^{57}\mathrm{Ni} reactions

Calculation formulas for average cross-sections

The cross-sections ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle averaged over the bremsstrahlung γ\gamma-flux W(E,Eγmax⁡)W(E,E_{\gamma\max}) from the threshold EthE_{\mathrm{th}} of the reaction understudy to the end-point energy of the spectrum Eγmax⁡E_{\gamma\max} were calculated with the use of the theoretical cross-section σ(E)\sigma(E) values computed with the TALYS1.95 code [9], installed on Ubuntu20.04. The cross-sections σ(E)\sigma(E) for the natNi(γ,xn)56Ni{}^{\mathrm{nat}}\mathrm{Ni}(\gamma,xn){}^{56}\mathrm{Ni} and natNi(γ,xn)57Ni{}^{\mathrm{nat}}\mathrm{Ni}(\gamma,xn){}^{57}\mathrm{Ni} reactions, calculated by the TALYS1.95 code, are shown in Figure 3.

Cross-sections for the reactions natNi(gamma,xn)56Ni and natNi(gamma,xn)57Ni

Figure 3. The cross-section σ(E)\sigma(E) for the reactions natNi(γ,xn)56Ni{}^{\mathrm{nat}}\mathrm{Ni}(\gamma,xn){}^{56}\mathrm{Ni} and natNi(γ,xn)57Ni{}^{\mathrm{nat}}\mathrm{Ni}(\gamma,xn){}^{57}\mathrm{Ni} (calculation by the TALYS1.95 code)

The bremsstrahlung flux-averaged cross-section ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle in a given energy interval was calculated by the formula:

⟨σ(Eγmax⁡)⟩=∫EthEγmax⁡σ(E)W(E,Eγmax⁡) dE∫EthEγmax⁡W(E,Eγmax⁡) dE.(1)\langle\sigma(E_{\gamma\max})\rangle=\frac{\int_{E_{\mathrm{th}}}^{E_{\gamma\max}}\sigma(E)W(E,E_{\gamma\max})\,\mathrm{d}E}{\int_{E_{\mathrm{th}}}^{E_{\gamma\max}}W(E,E_{\gamma\max})\,\mathrm{d}E}. \tag*{(1)}

These evaluated average cross-sections were compared with the experimental values calculated by the formula:

⟨σ(Eγmax⁡)⟩=λΔAεNxIγΦ(Eγmax⁡)(1−e−λtirr)e−λtcool(1−e−λtmeas).(2)\langle\sigma(E_{\gamma\max})\rangle=\frac{\lambda\Delta A}{\varepsilon N_x I_{\gamma}\Phi(E_{\gamma\max})(1-e^{-\lambda t_{\mathrm{irr}}})e^{-\lambda t_{\mathrm{cool}}}(1-e^{-\lambda t_{\mathrm{meas}}})}. \tag*{(2)}

where ΔA\Delta A is the number of counts of γ\gamma-quanta in the full absorption peak, λ\lambda is the decay constant (ln⁡2/T1/2\ln2/T_{1/2}), NxN_x is the number of target atoms, IγI_{\gamma} is the absolute intensity of the analyzed γ\gamma-quanta, ε\varepsilon is the absolute detection efficiency for the analyzed γ\gamma-quanta energy, Φ=∫EthEγmax⁡W(E,Eγmax⁡) dE\Phi=\int_{E_{\mathrm{th}}}^{E_{\gamma\max}}W(E,E_{\gamma\max})\,\mathrm{d}E is the integrated flux of bremsstrahlung quanta in the energy range from the reaction threshold EthE_{\mathrm{th}} up to Eγmax⁡E_{\gamma\max}; tirrt_{\mathrm{irr}}, tcoolt_{\mathrm{cool}} and tmeast_{\mathrm{meas}} are the irradiation time, cooling time and measurement time, respectively. A more detailed description of all the calculation procedures necessary for the determination of ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle can be found in [11, 12].

The reaction yield is defined as:

Y(Eγmax⁡)=Nx∫EthEγmax⁡σ(E)W(E,Eγmax⁡) dE.(3)Y(E_{\gamma\max})=N_x\int_{E_{\mathrm{th}}}^{E_{\gamma\max}}\sigma(E)W(E,E_{\gamma\max})\,\mathrm{d}E. \tag*{(3)}

This value is used in photonuclear experiments and is convenient for estimating the contributions of the reaction channels to the total reaction yield.

The normalized reaction yield contributions in the production of the 56,57^{56,57}Ni isotopes, calculated using the TALYS1.95 code with the default options, are presented in Table 2 for Eγmax⁡=94E_{\gamma\max}=94 MeV. For lower energies Eγmax⁡E_{\gamma\max} contributions of the 58^{58}Ni(γ,2n)(\gamma,2n) and 58^{58}Ni(γ,n)(\gamma,n) are close to 100%. The 58^{58}Ni(γ,2n)56(\gamma,2n)^{56}Ni and 58^{58}Ni(γ,n)57(\gamma,n)^{57}Ni reactions are the dominant channels, respectively, in the 56^{56}Ni and 57^{57}Ni isotopes production on the natural nickel.

NuclideContributing reactionsEthE_{\mathrm{th}}, MeVNormalized yield, %
56^{56}Ni58^{58}Ni(γ,2n)(\gamma,2n)22.4799.75
60^{60}Ni(γ,4n)(\gamma,4n)42.850.25
57^{57}Ni58^{58}Ni(γ,n)(\gamma,n)12.2299.79
60^{60}Ni(γ,3n)(\gamma,3n)32.600.20

Table 2. Normalized reaction yield contributions in the production of the 56,57^{56,57}Ni isotopes at Eγmax⁡=94E_{\gamma\max}=94 MeV

The normalized reaction yield contributions, given in Table 2, were used to estimate the experimental values of the flux-average cross-sections of the 58^{58}Ni(γ,n)57(\gamma,n)^{57}Ni and 58^{58}Ni(γ,2n)56(\gamma,2n)^{56}Ni reactions, like in [21].

RESULTS AND DISCUSSIONS

The radionuclide 56^{56}Ni (T1/2=6.077T_{1/2}=6.077 d) is produced on all stable isotopes of natural nickel as a result of photonuclear reactions. To identify 56^{56}Ni it was used the γ\gamma-line with Eγ=158.38E_{\gamma}=158.38 keV, Iγ=98.8%I_{\gamma}=98.8\%. The obtained experimental data of the bremsstrahlung flux-averaged cross-sections ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle for the natNi(γ,xn)56(\gamma,xn)^{56}Ni reaction are shown in Figure 4. It can be seen that our experimental data were lower than the theoretical values ⟨σ(Eγmax⁡)⟩th\langle\sigma(E_{\gamma\max})\rangle_{\mathrm{th}} calculated using the cross-sections σ(E)\sigma(E) from the TALYS1.95 code with the default options. At the same time, obtained ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle are agree satisfactorily with data from [8].

The 56^{56}Ni nucleus in the investigated energy region is basically produced from the 58^{58}Ni isotopes by the 58^{58}Ni(γ,2n)(\gamma,2n) reaction, Eth=22.471E_{\mathrm{th}}=22.471 MeV. The 58^{58}Ni isotope contributed more than 99% to 56^{56}Ni production.

The radionuclide 57^{57}Ni (T1/2=35.6T_{1/2}=35.6 h) is produced on all stable isotopes of natural nickel as a result of photonuclear reactions. To identify 57^{57}Ni the γ\gamma-lines with Eγ=127.16E_{\gamma}=127.16 keV, Iγ=16.7%I_{\gamma}=16.7\% and Eγ=1377.63E_{\gamma}=1377.63 keV, Iγ=81.7%I_{\gamma}=81.7\% were used. The experimental data of the bremsstrahlung flux-averaged cross-sections ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle for the natNi(γ,xn)57(\gamma,xn)^{57}Ni are shown in Figure 5. It can be seen that experimental data for both γ\gamma-lines are close to each other.

Such as in the case of the natNi(γ,xn)56(\gamma,xn)^{56}Ni reaction, the data for the natNi(γ,xn)57(\gamma,xn)^{57}Ni reaction are lower than the theoretical average cross-sections. The comparison of our ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle with data [8] shows a significant discrepancy between the results.

The isotope 57^{57}Ni is basically produce from the 58^{58}Ni(γ,n)(\gamma,n), Eth=12.218E_{\mathrm{th}}=12.218 MeV. The 58^{58}Ni isotope contributed more than 99% to 57^{57}Ni production (see Table 2).

The numerical values of the experimental total average cross-section data for the natNi(γ,xn)56(\gamma,xn)^{56}Ni and natNi(γ,xn)57(\gamma,xn)^{57}Ni reactions are presented in Table 3 and Table 4, respectively. Also, the experimental ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle values of the 58^{58}Ni(γ,2n)56(\gamma,2n)^{56}Ni and 58^{58}Ni(γ,n)57(\gamma,n)^{57}Ni reactions with the taken into account the natural abundance of the 58^{58}Ni isotope and the normalized reaction yield contributions it can be found in Table 3 and Table 4.

CONCLUSIONS

The total bremsstrahlung flux-averaged cross-sections ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle for the photonuclear reactions natNi(γ,xn)57(\gamma,xn)^{57}Ni and natNi(γ,xn)56(\gamma,xn)^{56}Ni have been measured in the range of the end-point energies Eγmax⁡=35...94E_{\gamma\max}=35...94 MeV. The experiments were performed with the beam from the electron linear accelerator LUE-40 NSC KIPT using the activation and off-line γ\gamma-ray spectrometric technique. The calculations of flux-average cross-sections ⟨σ(Eγmax⁡)⟩th\langle\sigma(E_{\gamma\max})\rangle_{\mathrm{th}} were carried out using the cross-section σ(E)\sigma(E) values computed with the TALYS1.95 code and bremsstrahlung flux calculated by GEANT4.9.2 code.

The experimental results are compared with theoretical calculations and literature data. Our data were lower than the theoretical ⟨σ(Eγmax⁡)⟩th\langle\sigma(E_{\gamma\max})\rangle_{\mathrm{th}} values for both investigated reactions.

The values ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle, obtained by the γ\gamma-lines with Eγ=1377.63E_{\gamma}=1377.63 and 127.16127.16 keV are marked in upright and in italics styles, respectively.

For the reaction natNi(γ,xn)56Ni{}^{\mathrm{nat}}\mathrm{Ni}(\gamma,xn){}^{56}\mathrm{Ni}, our experimental data agree satisfactorily with [8], while for the reaction natNi(γ,xn)57Ni{}^{\mathrm{nat}}\mathrm{Ni}(\gamma,xn){}^{57}\mathrm{Ni} there is a significant discrepancy between the results.

It is shown that the 58Ni(γ,n)57Ni{}^{58}\mathrm{Ni}(\gamma,n){}^{57}\mathrm{Ni} and 58Ni(γ,2n)56Ni{}^{58}\mathrm{Ni}(\gamma,2n){}^{56}\mathrm{Ni} reactions are the dominant channels, respectively, in the 56Ni{}^{56}\mathrm{Ni} and 57Ni{}^{57}\mathrm{Ni} isotopes production on the natural nickel.

The measured values ⟨σ(Eγmax⁡)⟩\langle\sigma(E_{\gamma\max})\rangle expand the energy range of previously known experimental data and are useful in studying the mechanism of photonuclear reactions in the energy region above GDR.

ACKNOWLEDGMENT

The authors would like to thank the staff of the linear electron accelerator LUE-40 NSC KIPT, Kharkiv, Ukraine, for their cooperation in the realization of the experiment.

REFERENCES

References

  1. [1]Ch.D. Bowman. Accelerator-driven systems for nuclear waste transmutation // Annu. Rev. Nucl. Part. Sci. 1998, v. 48, p. 505-556.DOI
  2. [2]Gohar, Y., Bolshinsky, I., & Kurnaukhov, I. (2013). KIPT accelerator-driven system design and performance. Second Int. Workshop Proceedings on Technology and Components of Accelerator-driven Systems, 254–265.
  3. [3]Vodin, A. N., Demchenko, P. A., Zelinsky, A. Y., & al., . et . (2013). Status of the existing accelerators and new accelerator projects. Problems of Atomic Science and Technology, (6), 3–7.
  4. [4]Fultz, S. C., Alvarez, R. A., Berman, B. L., & Meyer, P. (1974). Photoneutron cross sections of Ni-58 and Ni-60. Phys. Rev. C, 10, 608–619.
  5. [5]Goryachev, B., Ishkhanov, B., Kapitonov, I., & al., . et . (1970). Giant Dipole Resonance Parameters of Ground-State Photoabsorption. Sov. J. Nucl. Phys., 11, 141–149.
  6. [6]Borodina, S., Varlamov, A., Varlamov, V., & al., . et . (2000). Estimation of cross sections for (g,n), (g,p), (g,np) and (g,2n) reactions on ${}^{54,56}$Fe and ${}^{58,60}$Ni nuclei using the model of phenomenological description of the competition of GDR state decay channels. Preprint of MSU NPI-2000-6/610, 18.
  7. [7]Katz, L., & Cameron, A. G. W. (1951). A study of the photoneutron processes in the giant dipole resonance. Can. J. Phys., 29, 518.
  8. [8]Zaman, M., Kim, G., Naik, H., & al., . et . (2018). Flux weighted average cross-sections of ${}^{\mathrm{nat}}\mathrm{Ni}(\gamma,x)$ reactions with the bremsstrahlung end-point energies of 55, 59, 61 and 65 MeV. Nuclear Physics A, 978, 173–186.
  9. [9]Koning, A. J., Hilaire, S., & Duijvestijn, M. C. (2008). TALYS-1.0. EPJ Web Conf., 211.
  10. [10]Novikov, A. N., Diev, O. S., Timchenko, I. S., & Olejnik, S. N. (2021). Cross-sections for the ${}^{27}\mathrm{Al}(\gamma,x){}^{24}\mathrm{Na}$. Eur. Phys. J. A, 57, 207. https://doi.org/10.1140/epja/s10050-021-00483-y
  11. [11]Vodin, A. N., Deiev, O. S., Timchenko, I. S., & al., . et . (2020). Cross-sections for photonuclear reactions 93Nb(γ,n)92mNb and 93Nb(γ,n)92tNb at boundary energies of bremsstrahlung γ-energies Eγmax = 36…91 MeV. Problems of Atomic Science and Technology, (3), 148.
  12. [12]Vodin, A. N., Deiev, O. S., Korda, V. Y., & al., . et . (2021). Photoneutron reactions on 93Nb at Eγmax = 33…93 MeV. Nucl. Phys. A, 1014, 122248. https://doi.org/10.1016/j.nuclphysa.2021.122248
  13. [13]O.M. Vodin, O.S. Deiev, S.M. Olejnik. Activation of 93Nb nuclei on the linac LUE-40 of RDC “ACCELERATOR” and determination of photonuclear reaction cross-sections // Problems of Atomic Science and Technology. 2019, № 6, p. 122.DOI
  14. [14]Vodin, A. N., Deiev, O. S., Timchenko, I. S., & al., . et . (2021). Photoneutron reactions 181Ta(γ, xn; x = 1−8)181−xTa at Eγmax = 80…95 MeV. EPJ A, 57, 208. https://doi.org/10.1140/epja/s10050-021-00484-x
  15. [15]Deiev, O. S., Timchenko, I. S., Olejnik, S. N., & al., . et . (2021). Isomeric ratio of the 181Ta(γ,3n)178m,gTa reaction products at energy Eγmax up to 95 MeV. Chinese Phys. C, 46, 014001. https://doi.org/10.1088/1674-1137/ac2a95
  16. [18]Agostinelli, S., Allison, J. R., Amako, K., & al., . et . (2003). GEANT4-a simulation toolkit. Nucl. Instrum. Meth. In Phys. Research. A, 506, 250. https://doi.org/10.1016/S0168-9002(03)01368-8
  17. [19]Chu, S. Y. F., Ekstrom, L. P., & Firestone, R. B. (1999). The Lund/LBNL. Nuclear Data Search, Version 2.0, February 1999, WWW Table of Radioactive Isotopes. <a href="https://doi.org/http://nucleardata.nuclear.lu.se/toi/" rel="noopener noreferrer" target="_blank">https://doi.org/http://nucleardata.nuclear.lu.se/toi/</a>
  18. [20]Programe InterSpec V.1.0.8. (n.d.). Programe InterSpec V.1.0.8. <a href="https://doi.org/https://github.com/sandialabs/interspec/releases" rel="noopener noreferrer" target="_blank">https://doi.org/https://github.com/sandialabs/interspec/releases</a>.

Paper details

vlnc:W_6rwn2a82
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents