betaFeedback

WorksPhysics and Astronomy

Optimizing interference zeros for finite-pulse transmission in waveguide quantum electrodynamics

Abstract

A photon pulse occupies a range of frequencies, so suppressing reflection at its carrier need not minimize the error of the transmitted pulse. We study two separated emitters coupled to a common waveguide at several contact points. Interference between the contact paths can make the coupling that drives each emitter quadratic in frequency detuning. With matched propagation and emitter resonances centered on the carrier, the reflected fields cancel once more. Their combined reflection probability is then sixth order at zero loss. Separating each local double zero into two simple zeros can nevertheless improve transmission of a finite pulse. We minimize the leading narrowband error within this common static adjustment, counting reflection, absorption, and distortion of the transmitted mode. For a Gaussian pulse without loss, the minimum is two-fifths of the error for coincident zeros. Independent emitter loss favors a smaller separation because photons entering separate reservoirs do not share the cancellation of the reflected fields. The optimum follows from the pulse spectrum and the relative weight of these two processes. Uniform and Su–Schrieffer–Heeger waveguides realize the mechanism. In the latter, coordinated contact and resonance adjustments also preserve the full ratio of complex transmission amplitudes for opposite incidence directions. Finite-band calculations determine how the benefit changes with bandwidth and contact errors.

Introduction

A localized emitter can strongly alter the transmission of a single photon in a one-dimensional waveguide [2] [1]. Experiments with superconducting artificial atoms have realized this interaction [3], providing control over propagating photons and collective emitter dynamics [4] [5]. For two separated emitters, the photon can scatter from both sites before leaving the waveguide. The phase accumulated between the emitters determines how their radiated fields interfere, producing transmission resonances and collective radiation [6] [7]. Photon-mediated interactions have also been observed between distant superconducting qubits [8].

An emitter coupled to the waveguide at several points offers a second source of interference. A photon can excite that emitter through different contacts, and the corresponding amplitudes add before the excitation probability is formed. Their relative phases and strengths therefore change both the radiative decay rate and the emitter frequency shift [10] [9], as realized with superconducting artificial atoms [11]. Propagation between contacts can also produce delayed feedback when the travel time is comparable to the emitter lifetime [12]. The same interference can distinguish the two propagation directions [14] [13]. These effects allow the contacts to shape the response across a pulse spectrum, as well as at one selected frequency.

Quantum state transfer requires control of the photon’s temporal mode [15], and microwave techniques can generate single photons with prescribed pulse shapes [16]. Multipoint emitters also support directional emission over a broad band [17] and state transfer through static coupling profiles [18]. For transmission through a scatterer, high transmitted power is not sufficient: a frequency-dependent phase can distort the outgoing pulse. Frequencies at which reflection vanishes provide a route to impedance matching [19]. Higher-order output zeros have been related to the residual scattering of Gaussian wave packets [20], and distributing scattering zeros across a band can improve finite-band routing [21]. These results motivate a specific question. For a given incident pulse, should the reflection zeros coincide at the carrier or be separated across the occupied spectrum? Independent emitter loss can change the answer because its frequency dependence differs from that of coherent reflection.

Here we determine how two emitters should be adjusted to preserve a prescribed pulse incident from one side. At the reference setting, the contact paths make the coupling amplitude of each emitter vanish quadratically at the carrier. When the propagation phase is matched and the mean shifted emitter frequency lies at the carrier, cancellation between the reflected fields adds one further power of detuning at zero loss. The total reflected amplitude is then cubic. We adjust both emitters identically to split each local double zero into two simple zeros, while the collective reflection zero remains at the carrier in the lossless case. This redistributes reflection across the pulse spectrum. Photons lost by different emitters enter separate reservoirs, so their loss probabilities add without the extra cancellation of the reflected field. This difference gives a leading optimal separation determined by moments of the incident spectrum. For a Gaussian pulse without loss, the leading mode error falls to two-fifths of its value for coincident contact zeros. Independent loss shifts the optimum toward a smaller separation. The derivation retains frequency-dependent radiative rates and emitter frequency shifts and applies to the common static contact family defined in Sec. II.

A waveguide with alternating nearest-neighbor couplings provides a concrete realization. This Su–Schrieffer–Heeger (SSH) chain [22] has two sites per unit cell, so an emitter coupled to both sites can be excited through two interfering paths. Earlier work has explored cooperative radiation in dimerized waveguides [23], realized such waveguides in superconducting circuits [24], and shown how contact geometry shapes two-emitter scattering [25]. Exact treatments of two-qubit SSH scattering [26] and phase-dependent single-qubit wavepacket scattering [27] provide further background. In the geometry considered here, coordinated changes of the contact phases, strengths, and emitter frequencies separate the local zeros while keeping the ratio of opposite-incidence transmission amplitudes fixed at every frequency in the band. At fixed transmission ratio, allowing unequal A/B strengths or different adjustments of the two emitters cannot lower the leading error near the reference contacts. A uniform chain with three contacts per emitter realizes the same pulse optimization. It shows that the mechanism does not depend on the special SSH identities.

The remainder of this paper is organized as follows. Section II develops the local and collective interference mechanisms. Section III derives the pulse-dependent zero separation and its dependence on loss, and illustrates its realization in a uniform chain. Section IV gives the SSH realization and the condition for preserving the ratio of directional transmission amplitudes. Sections V and VI examine finite-bandwidth performance and calibration errors, and Sec. VII discusses the results. Appendix A derives the scattering and pulse expansions. Appendix B gives the microscopic waveguide calculations, and Appendix C treats the allowed contact variations. Appendices D and E give the finite-pulse comparisons and the bounds in the presence of contact errors.

Interference in scattering by two emitters

A photon enters the waveguide from the left and encounters two separated emitters. Each emitter couples to the waveguide at several contact points. The amplitudes for exciting one emitter through these contacts can cancel. The fields reflected by the two emitters can also cancel because they enter the same outgoing waveguide channel. Loss into two independent reservoirs is different: the final reservoir states are orthogonal, so their probabilities add. These different ways of combining amplitudes determine how moving the contact zeros changes reflection and loss.

Geometry, coupling amplitudes, and loss

We set ℏ=1\hbar= 1 and consider one photon scattering from two emitters in an otherwise lossless waveguide. Each emitter has one excited state. An open energy interval containing the carrier E0E_0 supports one right-moving and one left-moving channel, with finite nonzero group speeds. The contact regions have the same shape and are displaced along the waveguide without overlap. Their coupling strengths and phases are not yet assumed equal. Propagation between the regions contributes the phase p(E)p(E), with ∣p(E)∣=1|p(E)| = 1, in either direction.

The scattering construction assumes that these two traveling channels account for all coupling between the contact regions. Additional propagating channels, or an appreciable evanescent field connecting the regions, require a larger scattering description. The scalar construction is exact for the lattice realizations used here.

Let bjR(E)b_{jR}(E) be the coupling coefficient with which a right-moving photon drives emitter jj, and define bjL(E)b_{jL}(E) similarly for a left-moving photon. We normalize the traveling waves to unit flux. The squared amplitudes uj=∣bjR∣2u_j = |b_{jR}|^2 and gj=∣bjL∣2g_j = |b_{jL}|^2 are the radiative rates associated with the two traveling channels. Reflection involves excitation from one direction and emission into the other, so it contains the product cj=bjL∗bjRc_j = b_{jL}^{*}b_{jR}.

The waveguide also shifts the emitter transition energy by Λj(E)\Lambda_j(E), the real part of its retarded self-energy. For a bare transition energy ωj\omega_j, the response denominator is

Dj=E−ωj−Λj(E)+i2(γ+uj+gj).(1)D_j = E - \omega_j - \Lambda_j(E) + \frac{i}{2}(\gamma+ u_j + g_j). \tag*{(1)}

Each emitter additionally loses population to its own Markov reservoir through the jump operator γσj−\sqrt{\gamma}\sigma_j^-. The rate γ≥0\gamma\ge0 is the same for both emitters. The waveguide-induced rates and frequency shift retain their full energy dependence. Eliminating the waveguide gives the single-emitter scattering amplitudes

tjL=1−iujDj,tjR=1−igjDj,t_{jL} = 1 - \frac{i u_j}{D_j}, \qquad t_{jR} = 1 - \frac{i g_j}{D_j},
rjL=−icjDj,rjR=−icj∗Dj.(2)r_{jL} = -\frac{i c_j}{D_j}, \qquad r_{jR} = -\frac{i c_j^*}{D_j}. \tag*{(2)}

Here LL and RR on a scattering amplitude label the side of incidence. A photon incident from the left is initially right-moving and produces the emitter excitation amplitude bjR/Djb_{jR}/D_j. Emission into the left-moving channel contributes the conjugate coupling bjL∗b_{jL}^*, giving rjL=−ibjL∗bjR/Djr_{jL} = -i b_{jL}^*b_{jR}/D_j. The transmitted field contains both the incident photon and the forward-emitted field, which explains the unit term in tjLt_{jL}. The flux convention gives bjR,Lb_{jR,L} units of the square root of energy, so uju_j, gjg_j, and γ\gamma are rates when ℏ=1\hbar= 1.

A photon can reflect back and forth between the emitters before it leaves. The phase for one round trip is P(E)=p(E)2P(E) = p(E)^2. For unit incidence from the left, let ff be the right-moving field just after emitter 1 and bb the left-moving field returning to it. The local scattering relations are

f=t1L+r1Rb,b=Pr2Lf.(3)f = t_{1L} + r_{1R}b, \qquad b = P r_{2L}f. \tag*{(3)}

Solving them gives f=t1L/Zf = t_{1L}/Z, where Z=1−Pr1Rr2LZ = 1 - P r_{1R}r_{2L}. The outgoing fields on the right and left are pt2Lfp t_{2L}f and r1L+t1Rbr_{1L} + t_{1R}b, respectively. After removing the phase acquired in an empty waveguide, the result is

tL=t1Lt2LZ,tR=t1Rt2RZ,t_L = \frac{t_{1L}t_{2L}}{Z}, \qquad t_R = \frac{t_{1R}t_{2R}}{Z},
rL=r1L+Pt1Lt1Rr2LZ.(4)r_L = r_{1L} + \frac{P t_{1L}t_{1R}r_{2L}}{Z}. \tag*{(4)}

Equation (4) includes every return between the emitters and retains the full propagation phase p(E)p(E). We expand this response near the carrier only after the local and repeated-scattering contributions have been combined.

For incidence from side α\alpha, the transmission and reflection probabilities are Tα=∣tα∣2T_\alpha= |t_\alpha|^2 and Rα=∣rα∣2R_\alpha= |r_\alpha|^2. Let qjαq_{j\alpha} denote the excitation amplitude of emitter jj for unit incident flux. The probability lost to the two reservoirs is Aα=γ∑j∣qjα∣2A_\alpha=\gamma\sum_j|q_{j\alpha}|^2. Their orthogonal final states require these probabilities to add, even though the emitter excitations are generated coherently through the same waveguide. The reflected fields instead add before the squared modulus is taken. The self-energy relation in Appendix A gives Tα+Rα+Aα=1T_\alpha+R_\alpha+A_\alpha=1. At zero loss, the two-channel scattering matrix is unitary and TL=TRT_L=T_R, although the transmission phases can differ. Different transmission probabilities require loss in this setting [28].

Cancellation at a single emitter

We now choose the same contact strengths and phases for both emitters and write their common amplitudes as bR,bLb_R,b_L. At the carrier E0E_0, the contact paths cancel the right-moving drive. We require the cancellation to persist through first order in the energy detuning x=E−E0x=E-E_0. The leading coupling amplitude is then quadratic in xx, as expressed by

bR(E0;0)=∂EbR(E0;0)=0,∂E2bR(E0;0)≠0.(5)b_R(E_0;0)=\partial_E b_R(E_0;0)=0,\qquad\partial_E^2 b_R(E_0;0)\ne0. \tag*{(5)}

This condition concerns the coupling amplitude, not an extremum of the waveguide energy band. The group speed remains nonzero at E0E_0. For two interfering contact contributions, a stationary relative phase is sufficient only when their relative magnitudes also have no uncanceled linear variation. Appendix A derives this requirement.

To improve transmission of a finite pulse, we split each emitter’s second-order coupling zero into two simple zeros. Both emitters retain the same contact settings, so they share the same pair of zero frequencies. Let qq specify this static adjustment, chosen so that q\sqrt{q} is the leading displacement of either zero for small positive qq. Thus qq has units of energy squared and is the squared half-separation to leading order. We consider contact settings for which

bR(E;q)=a(E,q)[s(E)−q],s(E0+x)=x2+O(x3),a(E0,0)=a0≠0,(6)b_R(E;q)=a(E,q)[s(E)-q],\qquad s(E_0+x)=x^2+O(x^3),\qquad a(E_0,0)=a_0\ne0, \tag*{(6)}

Here s(E)s(E) is real at real energies, qq is real, and the functions are analytic in a fixed neighborhood of E0E_0 and q=0q=0. The zeros satisfy s(E)=qs(E)=q, so small positive qq gives x±=±q+O(q)x_\pm=\pm\sqrt{q}+O(q). Higher-order terms can shift their midpoint. Equation (6) ensures that the two zeros move along the real energy axis. A general perturbation of a complex coupling need not have this property and can instead move them to complex energies. The physical phases and strengths realizing qq are held fixed while each photon propagates. Sections III C and IV give two implementations.

The coupling to the opposite propagation direction remains finite at the carrier. Denote its rate by Γ=g(E0;0)>0\Gamma=g(E_0;0)>0. Define the curvature coefficient B=∣a0∣2/ΓB=|a_0|^2/\Gamma, so u=ΓB(x2−q)2+⋯u=\Gamma B(x^2-q)^2+\cdots. The rate g(E;q)g(E;q) and the waveguide-induced frequency shift may depend on both EE and qq; Γ\Gamma denotes gg only at the reference point (E0,0)(E_0,0).

Changing the contacts also shifts the emitter transition energies. We adjust the bare frequencies so that, after this waveguide-induced shift, their midpoint stays at the photon carrier. Their separation Δ\Delta is held fixed. The required bare frequencies and the resulting energy-dependent detuning are

ω1,2(q)=E0−Λ(E0;q)±Δ/2,h(E;q)=x−[Λ(E;q)−Λ(E0;q)].(7)\omega_{1,2}(q)=E_0-\Lambda(E_0;q)\pm\Delta/2,\qquad h(E;q)=x-[\Lambda(E;q)-\Lambda(E_0;q)]. \tag*{(7)}

Thus h(E0;q)=0h(E_0;q)=0 for every contact setting. Away from the carrier, hh retains the frequency dependence of the Lamb shift. The response denominators are D1,2=h∓Δ/2+i(γ+u+g)/2D_{1,2}=h\mp\Delta/2+i(\gamma+u+g)/2. The waveguide and contact positions remain unchanged as qq varies.

Cancellation between the two emitters

The common contact amplitude determines how strongly the incident photon excites either emitter. The fields emitted by the two driven emitters must then be added in the reflected channel. For identical contacts, this sum factors into the local coupling product c=bL∗bRc=b_L^*b_R and a collective interference factor N\mathcal{N}. Equation (4) gives

References

  1. [2]S. Fan, S. E. Kocabaş, and J.-T. Shen, Input-output formalism for few-photon transport in one-dimensional nanophotonic waveguides coupled to a qubit, Phys. Rev. A 82, 063821 (2010).DOI
  2. [4]D. Roy, C. M. Wilson, and O. Firstenberg, Colloquium: Strongly interacting photons in one-dimensional continuum, Rev. Mod. Phys. 89, 021001 (2017).DOI
  3. [6]T. S. Tsoi and C. K. Law, Quantum interference effects of a single photon interacting with an atomic chain inside a one-dimensional waveguide, Phys. Rev. A 78, 063832 (2008).DOI
  4. [8]A. F. van Loo, A. Fedorov, K. Lalumière, B. C. Sanders, A. Blais, and A. Wallraff, Photon-Mediated Interactions Between Distant Artificial Atoms, Science 342, 1494 (2013).DOI
  5. [10]A. F. Kockum, G. Johansson, and F. Nori, Decoherence-Free Interaction between Giant Atoms in Waveguide Quantum Electrodynamics, Phys. Rev. Lett. 120, 140404 (2018).DOI
  6. [12]L. Guo, A. Grimsmo, A. F. Kockum, M. Pletyukhov, and G. Johansson, Giant acoustic atom: A single quantum system with a deterministic time delay, Phys. Rev. A 95, 053821 (2017).DOI
  7. [14]A. Soro and A. F. Kockum, Chiral quantum optics with giant atoms, Phys. Rev. A 105, 023712 (2022).DOI
  8. [16]M. Pechal, L. Huthmacher, C. Eichler, S. Zeytinoglu, A. A. Abdumalikov, Jr., S. Berger, A. Wallraff, and S. Filipp, Microwave-Controlled Generation of Shaped Single Photons in Circuit Quantum Electrodynamics, Phys. Rev. X 4, 041010 (2014).DOI
  9. [18]O. Diekmann, E. Di Benedetto, N. Jungwirth, D. De Bernardis, Z. Kuang, F. Ciccarello, S. Rotter, P. Rabl, A. González-Tudela, and C. González-Ballestero, Enabling Deterministic Passive Quantum State Transfer with Giant Atoms, PRX Quantum 7, 043013 (2026).DOI
  10. [20]M. Li, H. Z. Shen, H. D. Liu, and G. Wang, Giant-Atom-Induced High-Order Output Zeros in a Coupled-Cavity Array, arXiv:2609.21560v2 (2026).arxiv.org/abs/2609.21560
  11. [22]W. P. Su, J. R. Schrieffer, and A. J. Heeger, Solitons in Polyacetylene, Phys. Rev. Lett. 42, 1698 (1979).DOI
  12. [24]E. Kim, X. Zhang, V. S. Ferreira, J. Banker, J. K. Iverson, A. Sipahigil, M. Bello, A. González-Tudela, M. Mirhosseini, and O. Painter, Quantum Electrodynamics in a Topological Waveguide, Phys. Rev. X 11, 011015 (2021).DOI
  13. [26]J. Zhou, X. X. Zhang, and X. Z. Zhang, Non-Hermitian scattering in Su–Schrieffer–Heeger superconducting waveguides: Exact Green’s-function reduction and dimerization-sensitive microwave functionalities, Phys. Rev. A 113, 062466 (2026).DOI
  14. [27]X. X. Zhang, J. Zhou, and X. Z. Zhang, Single-photon scattering in a dissipative superconducting-qubit–SSH lattice hybrid, Adv. Quantum Technol. 9, e70472 (2026).arxiv.org/abs/2606.10510
  15. [28]Y.-T. Chen, L. Du, L. Guo, Z. Wang, Y. Zhang, Y. Li, and J.-H. Wu, Nonreciprocal and chiral single-photon scattering for giant atoms, Commun. Phys. 5, 215 (2022).DOI
  16. [29]G. Calajó, F. Ciccarello, D. Chang, and P. Rabl, Atom-field dressed states in slow-light waveguide QED, Phys. Rev. A 93, 033833 (2016); 93, 069905(E) (2016).DOI
  17. [30]X. Z. Zhang, X.-F. Zhang, and W.-M. Liu, Chiral Floquet Selection of an Algebraic Rydberg Bound State in the Continuum, Chin. Phys. Lett. 43, 110301 (2026).DOI

Paper details

vlnc:W_6tte8aua
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 2

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents