betaFeedback

WorksPhysics and Astronomy

Energy Localization in Spherical Non-Hermitian Topolectrical Circuits

Abstract

This work delves into the energy localization in non-Hermitian systems, particularly focusing on the effects of topological defects in spherical models. We analyze the mode distribution changes in non-Hermitian Su-Schrieffer-Heeger (SSH) chains impacted by defects, utilizing the Maximum Skin Corner Weight (MaxWSC). By introducing an innovative spherical model, conceptualized through bisecting spheres into one-dimensional chain structures, we investigate the non-Hermitian skin effect (NHSE) in a new dimensional context, venturing into the realm of non-Euclidean geometry. Our experimental validations on Printed Circuit Boards (PCBs) confirm the theoretical findings. Collectively, these results not only validate our theoretical framework but also demonstrate the potential of engineered circuit systems to emulate complex non-Hermitian phenomena, showcasing the applicability of non-Euclidean geometries in studying NHSE and topological phenomena in non-Hermitian systems.

In recent years, the study of non-Hermitian systems has attracted immense interest [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12], primarily due to the non-Hermitian skin effect (NHSE) [13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24], a phenomenon where most eigenstates of non-Hermitian operators localize at the boundaries. This effect, characterized by edge or surface states that are adhered to the standard bulk-boundary correspondence (BBC), becomes particularly intriguing in its interplay with topological structures [15, 17]. Topological invariants, such as the Zak phase and Chern number, derived from the Bloch Hamiltonian, are instrumental in identifying topological phases and phase transitions [25]. The experimental observation of NHSE in these contexts has led to a deeper understanding of topological phenomena in non-Hermitian systems [13, 15, 18, 21].

Leveraging advanced electrical engineering techniques, electrical circuits have emerged as potent platforms for realizing and exploring topolectrical circuits [12, 13, 15, 17, 18, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36]. These circuits, often comprising capacitors and inductors, have facilitated the realization of various topological states [25, 26, 28, 31, 32, 34, 35, 36]. It is particularly evident in the domain of second-order topological insulators, where the topology is characterized by quantized quadrupole moment [32, 34] and two-dimensional (2D) Wannier centers [35, 36], as implemented in square and Kagome lattices. Notably, the incorporation of non-Hermitian and nonlinear characteristics through resistors, amplifiers, and nonlinear capacitors has expanded the scope of these experimental models. In 1854, the German mathematician Bernhard Riemann established a more comprehensive form of geometry, known as Riemannian geometry [37], of which Euclidean geometry is a special case. The establishment of Riemannian geometry provided the mathematical tools necessary for Albert Einstein to develop the General Theory of Relativity [38]. A quintessential example of Riemannian geometry is the geometry of a sphere. However, most experiments are still based on Euclidean geometric spaces [17, 25, 26, 27, 28, 30, 32, 33, 34, 36] or employ simple passive components [17, 25, 26, 28, 32, 33, 34, 36]. Only a limited number of experiments have utilized active components such as operational amplifiers [27, 30], which leads to the pivotal question of our research: Can NHSE be realized and manipulated in more complex Riemannian geometric spaces?

In this work, we explore energy localization in non-Hermitian systems, focusing on the impact of topological defects in spherical models. Our investigation employs the Maximum Skin Corner Weight (MaxWSC) to analyze the influence of defects on the spatial distribution of modes. The work initiates with a defect-free non-Hermitian Su-Schrieffer-Heeger (SSH) model, examining NHSE through admittance spectra and inverse participation ratios (IPR) [39, 40, 41]. Subsequently, we introduce defects into the SSH chains to observe changes in mode distribution due to local perturbations. Inspired by recent findings on dimensional transmutation in non-Hermitian systems [42], where non-Hermitian couplings alter the dimensionality of the system, we extend our research to Spherical Non-Hermitian Systems. In line with the principle that in 2D models, non-Hermitian couplings can lead to effective one-dimensional behavior, our spherical model considers a similar dimensional transition. By bisecting a sphere, we effectively create a system that can be conceptualized as one-dimensional chain-like structures, enabling us to study NHSE in a new dimensional context. This spherical model reveals diverse energy localization behaviors influenced by coupling strengths and defects. Theoretical findings are validated experimentally on Printed Circuit Boards (PCBs), confirming predictions of energy localization.

We initially consider a defect-free non-Hermitian SSH chain and its corresponding topolectrical circuits, as depicted in Figure 1(a). Each unit cell comprises N=2N=2 nodes, labeled as nodes A and B (enclosed within a red rectangular frame in Figure 1(a)). The forward (C1−Cn1C_1-C_{n1}) and reverse (C1+Cn1C_1+C_{n1}) coupling between nodes A and B, as well as the forward (C2+Cn2C_2 + C_{n2}) and reverse (C2−Cn2C_2 - C_{n2}) coupling between nodes B and A are distinct. The non-Hermitian characteristics of the SSH chain circuit are induced by Cn1C_{n1} and Cn2C_{n2}. We achieve asymmetric coupling by connecting capacitors to unity-gain operational amplifiers. Notably, the sign of the non-Hermitian part of the coupling CniC_{ni} can be flipped by inverting the operational amplifier, thereby reversing the bias between intercell and intracell segment couplings with respect to each other. This inversion of the sign of CniC_{ni} in the asymmetric coupling, refer to as the negative impedance converter with current inversion (INIC) [27, 30].

Image not extracted

Figure 1. Topological properties of defect-free cyclic non-Hermitian SSH chains. (a) The structural and circuit diagrams. (b-d) Admittance spectra under open boundary conditions indicated by red dots and periodic boundary conditions indicated by colored dots with defect-free cyclic structure. Inspection of the upper half of panels shows the IPR of eigenstates.

Following the Kirchhoff's laws, the Laplacian of the grounded circuit can be written as

L(β,ω)=(jω)(1ω2L−Ceq1+(C1−Cn1)+(C2−Cn2)(C1−Cn1)+(C2−Cn2)β(C1+Cn1)+(C2+Cn2)β−11ω2L−Ceq2+(C1+Cn1)+(C2+Cn2))(1)L(\beta,\omega)=(j\omega)\begin{pmatrix} \frac{1}{\omega^{2}L}-C_{eq1}+(C_1-C_{n1})+(C_2-C_{n2}) & (C_1-C_{n1})+(C_2-C_{n2})\beta\\ (C_1+C_{n1})+(C_2+C_{n2})\beta^{-1} & \frac{1}{\omega^{2}L}-C_{eq2}+(C_1+C_{n1})+(C_2+C_{n2}) \end{pmatrix} \tag*{(1)}

Here, β\beta is the non-Bloch factor given by β=reik=e−αeik\beta= re^{ik} = e^{-\alpha}e^{ik}. The non-Bloch multiplication factor α\alpha denotes the exponential decay of the voltage and α\alpha is the non-Bloch multiplication factor. The diagonal terms of Eq. (1) represent a net shift in the eigenvalues of the Laplacian and can be adjusted by varying the frequency. At the resonant frequency of

ω=1LCxi(Cx1=Ceq1−(C1−Cn1)−(C2−Cn2)Cx2=Ceq2−(C2+Cn2)−(C2+Cn2))\omega=\frac{1}{\sqrt{LC_{xi}}}\left(C_{x1}=C_{eq1}-(C_1-C_{n1})-(C_2-C_{n2})\quad C_{x2}=C_{eq2}-(C_2+C_{n2})-(C_2+C_{n2})\right)

the diagonal terms vanish.

Subsequently, we analyze the NHSE of the structure. As illustrated in Figure 1(b-Figure 1d), the red points on the coordinate plane represent the admittance spectra under periodic boundary conditions (PBC). The colored dots from blue to yellow in each column indicate the eigenmode at the complex admittance values given by the Re(JJ) and Im(JJ) under open boundary conditions (OBC). For each eigenmode, the zz coordinate of the dots indicates their spatial position along the chain, with the color of each point reflecting the energy value of that node.

To quantitatively assess the extent of localization within the eigenstates of our cyclic structure, we employ the IPR. The IPR for a given eigenstate nn is defined as [39, 40, 41]:

IPRn=∑i=1L∣Vin∣4,(2)IPR_n = \sum_{i=1}^{L} \left|V_i^n\right|^4, \tag*{(2)}

where the summation extends over all lattice sites ii of the chain, and the eigenvectors VinV_i^n are normalized such that ∑i=1L∣Vin∣4=1\sum_{i=1}^{L} \left|V_i^n\right|^4=1. This normalization ensures that the IPR provides a consistent measure of localization across different states. Small IPR values are indicative of states that are extended or delocalized across the chain, whereas larger IPR values denote states that are highly localized. This metric is a crucial tool for distinguishing between extended and localized modes within the spectrum of our system.

Then, we delve into the criticality of non-Hermitian parameters in our system. The critical value of Cn1C_{n1}, pivotal in determining the extent of the NHSE, is intricately linked to the other non-Hermitian parameters and the coupling capacitors within our framework. Deriving from the complex admittance analysis, the formula for the critical value of Cn1C_{n1} is given by [17]

Cn1=Ccritical=C1Cn2C2.(3)C_{n1}=C^{critical}=\frac{C_1 C_{n2}}{C_2}. \tag*{(3)}

This relationship suggests a delicate balance between these parameters, where any deviation from this critical value results in the localization of voltage eigenstates, a hallmark of NHSE. Consequently, understanding and manipulating Cn1C_{n1} within its critical range becomes crucial for controlling and exploring the NHSE in our system.

The calculations for Cn1<CcriticalC_{n1}<C^{critical}, Cn1=CcriticalC_{n1}=C^{critical}, Cn1>CcriticalC_{n1}>C^{critical} have been conducted, with the same values of C1=1 μFC_1=1\ \mu F, C2=1 μFC_2=1\ \mu F and Cn2=0.5 μFC_{n2}=0.5\ \mu F. Cn1C_{n1} is set to 0.5Ccritical0.5C^{critical}, 1.0Ccritical1.0C^{critical} and 1.5Ccritical1.5C^{critical} in Figure 1(b), (c) and (d), respectively. For these three situations, it is observed that the eigenmode at each complex admittance value spatially coincides with the admittance spectra under PBC conditions. Inspection of the upper half of panels in Figure 1(b-Figure 1d) reveals that the calculated IPR values do not exhibit significant magnitudes across the three cases. The absence of elevated IPR values suggests that the extended states within our system do not gradually localize with nonzero.

Subsequently, we explore the incorporation of defective states into an originally pristine cyclic structure. We now modify the coupling at one specific site in the cyclic structure to match the coupling at adjacent sites as shown in Figure 2(a). The defect point is set at node 8. This modification entails changing the original forward coupling (C2+Cn2C_2 + C_{n2}) to (C1−Cn1C_1 - C_{n1}) and the reverse coupling (C2−Cn2C_2 - C_{n2}) to (C1+Cn1C_1 + C_{n1}).

Image not extracted

Figure 2. Topological properties of defective cyclic non-Hermitian SSH chains. (a) The structural and circuit diagrams. (b-d) Admittance spectra under OBC indicated by red dots and PBC indicated by colored dots with defective cyclic structure. Inspection of the upper half of panels shows the IPR of eigenstates.

It is observed that the spatial distribution of the eigenmode at each complex admittance value does not coincide with the admittance spectra under PBC in Figure 2(b-Figure 2d). The deviation highlights the impact of introducing non-Hermitian defect states in the system. The altered coupling due to the defects leads to a distinct spatial distribution of modes, illustrating the sensitivity of the system's spectral characteristics to local perturbations. Upon examination of the IPR values presented in the upper half of panels in Figure 2(b-Figure 2d), we observe a same across the three considered cases. For the three cases, the IPR values remain very low, indicating that the extended states retain their delocalized character without significant signs of localization. We can see from the graph that energy mainly concentrates near the defect location.

To quantify the extent to which the eigenmode of various structures approximate the PBC admittance spectra, we introduce the following formula:

D=∑i=1ndi=∑i=1n([Re⁡(λi)−Re⁡(λPBCi)]2+[Im⁡(λi)−Im⁡(λPBCi)]2).(4)D = \sum_{i=1}^{n} d_i = \sum_{i=1}^{n} \left(\sqrt{\left[\operatorname{Re}(\lambda_i)-\operatorname{Re}(\lambda_{PBC_i})\right]^2 + \left[\operatorname{Im}(\lambda_i)-\operatorname{Im}(\lambda_{PBC_i})\right]^2}\right). \tag*{(4)}

An instantiation of Eq. (4) is presented in Figure 3, which showcases a top view of the eigenmode distributions in relation to the PBC admittance spectrum, incorporating a structural defect. In this specific situation, we have designated the coupling coefficient Cn1=CcriticalC_{n1}=C^{critical} and the defect is introduced at node 7. We define did_i as the distance of each OBC eigenmode admittance spectra from the PBC admittance spectra. The sum of did_i across all characteristic modes is computed, yielding the results as per Eq. (4).

Image not extracted

Figure 3. Quantitative analysis of the admittance spectra deviation.

Subsequent calculations of the DD values for the cyclic structure, both in the presence and absence of defects at various nodes, are executed by Eq. (4) and delineated in Table 1. The data reveals that the DD values for structures without defects are three orders of magnitude lower than those with defects. Within a certain margin of computational error, it supports the conclusion that "the eigenmode at each complex admittance value spatially coincides with the admittance spectra under PBC conditions". The markedly lower DD values in defect-free structures suggest a strong alignment with PBC, indicating that the defect free circular structure belongs to PBC.

Nodecyclic structure (defect-free)cyclic structure (defective)
81.2045×10−21.2045 \times10^{-2}11.848
101.0317×10−21.0317 \times10^{-2}11.946
121.3561×10−21.3561 \times10^{-2}11.998
141.3296×10−21.3296 \times10^{-2}12.029
161.5160×10−21.5160 \times10^{-2}12.049

Table 1. DD values for defect-free cyclic structure and defective cyclic structure.

To reveal the longitudinal characteristics in spherical systems, we take care of the behavior of an open chain with N=11N=11 nodes depicted in Figure 4. The analysis presented in Figure 4(b) focuses on the MaxWSC as a function of node position, providing a quantification of energy concentration within the system. We define MaxWSC(i) as

Image not extracted

Figure 4. (a) Schematic representation for a linear chain lattice. (b) MaxWSC as a function of node defects position, quantifying the energy aggregation in the system. The blue line represents the MaxWSC for the lower half of the chain, while the red line corresponds to the upper half. Solid circles indicate the MaxWSC values for each half, highlighting regions of peak energy concentration.

MaxWSC⁡(Node)=max⁡1≤i≤n[∑j∣V(j,i)∣4e−∣r(j)−r(Node)∣/ε],(5)\operatorname{MaxWSC}(\mathrm{Node})=\max_{1\le i\le n}\left[\sum_j \left|V(j,i)\right|^4 e^{-\left|r(j)-r(\mathrm{Node})\right|/\varepsilon}\right], \tag*{(5)}

where V(j,i)V(j,i) represents the jj-th eigenvector corresponding to the ii-th eigenvalue. The first factor ∣V(j,i)∣4\left|V(j,i)\right|^4 measures the localization strength of eigenmodes. The second factor e−∣r(j)−r(Node)∣/εe^{-\left|r(j)-r(\mathrm{Node})\right|/\varepsilon}, which decays exponentially away from the corner with decay length ε\varepsilon, selects only the modes localized at the corners. MaxWSC (Node) represents the maximum weighted state contribution at a given node within the system. The summation of MaxWSC values for each half provides a clear indication of energy localization: a higher cumulative MaxWSC in one half implies a greater concentration of energy in that region. By systematically analyzing these sums for different defect configurations, we can know the role that the position of a defect plays in directing the energy distribution pattern within the model.

Then we examine the energy distribution across a network structure described by an n×nn \times n Laplacian matrix. Each eigenmode of this matrix corresponds to a distinct energy state of the system, with nn eigenvectors delineating the state's distribution across the nodes of the network. To quantify the contribution of each state to one given node, we calculate the WSC for every eigenmode relative to the node, utilizing the IPR. The IPR serves as a localization metric, indicating the extent to which a state is localized around a particular node. For one given node, we determine the MaxWSC by identifying the maximum WSC value from among all the eigenvalues, thereby gauging the peak energy presence at that node. Subsequently, by computing the MaxWSC for each node sequentially, we construct a profile of energy distribution for the entire structure shown in Figure S1. It allows us to visualize and analyze the pattern of energy localization, which is particularly influenced by the network's topological defects. Regions with higher MaxWSC values indicate nodes with greater energy localization, which are critical for understanding the flow and distribution of energy within the network, as well as the influence of non-Hermitian properties.

Image not extracted

Figure S1. Energy analysis of defect states in chain and spherical model using MaxWSC. (a) MaxWSC for defects at even nodes in the chain model. (b) MaxWSC for defects at odd nodes in the chain model. (c) MaxWSC for defects in even layers of the spherical model. (d) MaxWSC for defects in odd layers of the spherical model.

The term "Node=2" in Figure 4(b) refers to the introduce of defects characterized by modifying the coupling strength between the second and third nodes equal to that between the first and second nodes, which highlights the influence of symmetric coupling variations within the system's structure. Our observations point to a correlation between the position of the defects and the localization of energy: when the defect is situated at an odd-numbered node, the energy tends to be localized in the lower half of the chain; conversely, when the defect is at an even-numbered node, energy localization is observed in the upper half. We also provide the MaxWSC of nodes with defective between layers in Figure S2.

Figure S2. The MaxWSC as a function of the layer position within the spherical model, illustrating the energy aggregation in response to interlayer defects. The blue line with open circles denotes the MaxWSC for the lower hemisphere of the sphere, while the red line with open circles represents the MaxWSC for the upper hemisphere. The solid circles highlight the peak MaxWSC values for each hemisphere, identifying the layers with the most pronounced energy concentration.

Image not extracted

Figure 5. Structure diagram and partial circuit diagram of the spherical model.

Non-Hermitian couplings can lead to a dimensional reduction in the effective Brillouin zone of lattices, a phenomenon termed "dimensional transmutation” [42]. It challenges traditional classifications of topological states by showing that topological invariants in non-Hermitian systems can be protected by lower-dimensional topologies. By bisecting the spherical model along the equator and unfolding it into a plane, topological properties are preserved even through the mapping from non-Euclidean geometry to Euclidean geometry space, aligning with findings on dimensional transmutation in non-Hermitian systems without altering topological characteristics.

The spherical model is comprised of 11 concentric layers that mimic the stratification observed in spherical coordinates. These layers are populated with nodes that increase and then decrease in number from the top to the bottom, specifically in the sequence of 1, 2, 4, 8, 16, 32, 16, 8, 4, 2, and 1, respectively. Each layer constitutes a closed ring circuit, analogous to the cyclic model previously discussed. The interlayer couplings are designed to emulate the chain-like structure, resulting in an asymmetric coupling between consecutive layers. For this structure, there are 94 nodes in total, and we specify the top node number to 1.

The ramifications of varying inter-node coupling strengths within the spherical circuit model are delineated in Figure 6, each possessing an inherent critical coupling threshold—C1criticalC_{1}^{critical} for intra-ring and C2criticalC_{2}^{critical} for inter-ring interactions. To facilitate a streamlined discussion of the system's behavior under various regimes, these critical couplings are equated in the analysis. The circuit parameters are meticulously chosen as follows: C1=C1′=1.8 μFC_{1}=C_{1}^{\prime}=1.8\ \mu F, C2=C2′=1 μFC_{2}=C_{2}^{\prime}=1\ \mu F and Cn2=Cn2′=0.5 μFC_{n2}=C_{n2}^{\prime}=0.5\ \mu F. This parametric configuration allows us to probe into three distinct regimes characterized by the relative strength of Cn1<CcriticalC_{n1}<C^{critical}, Cn1=CcriticalC_{n1}=C^{critical}, and Cn1>CcriticalC_{n1}>C^{critical}.

Image not extracted

Figure 6. Admittance spectra and energy localization in the spherical model under different conditions. (a-c) Illustrate the admittance spectra of the spherical model for three distinct cases at a specific eigenvalue. (d-f) Display the MaxWSC for the corresponding spherical model cases, with the node index plotted along the horizontal axis and the MaxWSC value along the vertical axis.

Energy distributions corresponding to discrete eigenvalues are rendered into a spherical coordinate system in Figure 6(a-Figure 6c), visualized in a three-dimensional representation with the XX, YY, and ZZ axes corresponding to the physical structure. The color bar indicates the magnitude of the admittance at each node. The distribution shown in Figure 6(a) is characterized by a predominant allocation of energy to the upper hemisphere of the sphere. Contritely, a state of minimal energy aggregation, with no discernible localization within the spherical domain, is represented in Figure 6(b). Conversely, portrayed in Figure 6(c) is a concentrated energy disposition within the lower hemisphere, indicating an inverse localization pattern relative to that observed in Figure 6(a). The MaxWSC computations, illustrated in Figure 6(d-Figure 6f), provide a quantitative synthesis of the localization phenomena observed. A predilection for energy concentration at the top of the sphere is displayed in Figure 6(d), whereas a gravitation of energy towards the bottom is revealed in Figure 6(f). The intermediate scenario, captured in Figure 6(e), evidences a more homogeneous energy distribution across the polar extremes of the sphere, with MaxWSC magnitudes that are diminutive in comparison to the other examined cases, hence indicating a less conspicuous congregation of energy. In addition, we provide MaxWSC Aggregation of node defects in spherical model with three cases in Appendix § 3.

Thus, the spherical model, an intricate amalgamation of ring and chain motifs subject to different coupling strengths, exhibits a rich tapestry of energy localization behaviors that are contingent upon the critical coupling constants. By calibrating C1C_{1} and C2C_{2} to their critical counterparts and systematically adjusting Cn1C_{n1}, we have unveiled distinct localization regimes. These regimes are characterized by their energy distributions, which transition from polar concentration to more uniform dispersion across the spherical lattice.

A comprehensive portrayal of the empirical validation for energy distribution in the presence of inter-layer defects within a spherical model, achieved through the construction and analysis of a seven-layer physical circuit, is provided in Figure 7. The overarching PCB layout of the assembled circuit, along with a detailed view of the critical components, is displayed in Figure 7(b). The global layout (left) and the zoomed-in sections (right) are annotated to identify the nodes (red boxes), the coupling circuits between the ring structures (light pink boxes), and the inter-layer coupling circuits (yellow boxes). The INIC within our experimental setup is composed of OPA695 operational amplifiers, chosen for their disabled function and ultra-wideband current feedback capabilities, provided by Texas Instruments.

Image not extracted

Figure 7. Experimental realization and energy distribution mapping of the spherical model on a PCB. (a) The simplified schematic of the seven-layered spherical model with an intentional defect introduced at Layer 2. (b) The photograph of the PCB fabricated to embody the spherical model. Insets provide a magnified view of critical nodes, illustrating the circuitry and components that constitute the system. (c-e) The admittance spectra under CMT, LTspice simulation, and experimental.

The circuit parameters are meticulously calibrated to C1=C1′=2 μFC_1=C'_1=2\ \mu\mathrm{F}, C2=C2′=1 μFC_2=C'_2=1\ \mu\mathrm{F}, Cn2=Cn2′=0.5 μFC_{n2}=C'_{n2}=0.5\ \mu\mathrm{F} and L=10 mHL=10\ \mathrm{mH}. Defects were systematically introduced at Layer 2 under the condition Cn1=CcriticalC_{n1}=C^{\mathrm{critical}}. The admittance spectrum shown in Figure 7(c) corroborates the theoretical prediction by CMT, with energy prominently localized in the lower hemisphere, consistent with the results presented in Figure S2 that defects in even-numbered layers behave in such a distribution.

To reinforce these findings, a direct circuit simulation by LTspice is conducted, mirroring the physical circuitry to ascertain the voltage values at each node at the circuit's resonant frequency of 15.91 kHz. The resultant energy distribution from the simulation, depicted in Figure 7(d), aligns with the admittance spectrum, confirming the lower hemisphere energy concentration. The experimental verification, as shown in Figure 7(e), also indicates energy localization in the lower hemisphere. Slight discrepancies between the measured node voltages and the simulation data can be attributed to the inherent tolerance in the circuit components—inductors with a 2% margin of error and capacitors with a 5% margin, as well as the precision limits of the measurement apparatus. Despite these variances, the overall experimental outcomes resonate with the theoretical model, signifying a successful experimental observation of the predicted energy localization effects within the meticulously designed circuit. Details of the specific measurement instruments can be found in Appendix § 4.

In summary, we investigate energy localization in non-Hermitian systems, focusing on the effects of topological defects in cyclic and spherical models. Employing the MaxWSC, we begin with a defect-free non-Hermitian SSH model, studying NHSE through admittance spectra and IPR. We observe altered mode distributions Introducing defects into the SSH chains, then our research progresses to spheres geometries, inspired by the concept of dimensional transmutation where non-Hermitian couplings alter system dimensionality [42]. Specifically, we extend this idea to our spherical model, bisecting a sphere to create chain-like structures for NHSE. This model unveils diverse energy localization behaviors influenced by coupling strengths and defects. Our theoretical findings are confirmed experimentally on a PCB. This study not only extends the experimental exploration of non-symmetric coupling models to Riemannian geometric spaces but also enhances their applications in microscale energy manipulation and control within electronic circuits.

Acknowledgements

The authors thank for NUPTSF (Grants No. NY220119, NY221055).

Supplement to MaxWSC Aggregation

In the analysis shown in Figure S1, which extends the observations from Figure 4 and Figure 7, the focus is on examining the MaxWSC values across various defect states. The data in S1. (a-b) reveals that when defects are positioned at even-numbered nodes, there is a notable concentration of MaxWSC at the lower nodes. On the other hand, defects at odd-numbered nodes result in an accumulation of MaxWSC at the upper nodes. This distribution demonstrates consistency with the patterns and conclusions in Figure 4.

The results provide focus on the MaxWSC distribution in spherical model with layered defects in Figure S1-Figure S1). This examination specifically scrutinizes how MaxWSC varies across different layers within the spherical model. It becomes evident that defects in even layers lead to MaxWSC predominantly localizing in the sphere's lower hemisphere. In contrast, defects in odd layers are associated with MaxWSC primarily concentrating in the upper hemisphere. This distinct pattern of MaxWSC distribution not only complements but also substantiates the findings observed in Figure 7, suggesting a robust interplay between the positioning of defects and MaxWSC localization in these complex systems.

In delineating the energy landscape of our spherical model, 'Layer=2' is designated to represent a configuration where the coupling strength between the first- and second-layers mirrors that of the coupling between the second and third layers. We set the inter-layer coupling parameter Cn1C_{n1} at parity with the system's critical coupling CcriticalC^{critical}. To discern the influence of localized structural perturbations, we introduce defects sequentially to each layer and performed a comprehensive sweep to evaluate the MaxWSC under these varying defect conditions. The graphical representation of this analysis is presented in Figure S2, which plots the MaxWSC against the layer index, offering a quantitative measure of energy localization in the presence of layer-specific defects.

The emergent pattern, as depicted in Figure S2, aligns with observations from our chain-like structure shown in Figure 4(b), where defects in odd-numbered layers lead to a preponderance of energy in the lower hemisphere, and conversely, defects in even-numbered layers result in the accumulation of energy in the upper hemisphere. This consistent trend not only draws parallels between the spherical model's inter-layer coupling and that observed in chain-like structures but also underscores the analogous influence of structural asymmetries on energy distribution. The symmetry of the energy distribution in response to defects reveals underlying principles of non-Hermitian physics, where the spatial configuration plays a pivotal role in governing the localization dynamics.

Supplement of Node Defects Under Spherical Model

We conduct a study on energy localization at node defects in cyclic model, observing a predominant congregation of energy at these defect sites in Figure 2. We extend this analysis to spherical model, where we examine the aggregation of energy at every node defect. Our discussion is structured around three distinct scenarios: Cn1<CcriticalC_{n1} < C^{\mathrm{critical}}, Cn1=CcriticalC_{n1} = C^{\mathrm{critical}}, Cn1>CcriticalC_{n1} > C^{\mathrm{critical}}. The energy accumulation with defects added in Figure S3 (a) and (c) is consistent with that without defects in Figure 6. The MaxWSC Aggregation values in the upper and lower parts of Figure S3 (b) do not remain separate. Indicates that energy accumulation is not as obvious.

MaxWSC Aggregation of node defects in spherical model

Figure S3. MaxWSC Aggregation of node defects in spherical model.

Circuit Measurement and Testing Instrument

Photos of PCB and testing instruments

Figure S4. Photos of PCB and testing instruments.

We utilize JLC EDA software to develop PCB, and make appropriate designs for PCB composition, stacking layout, inner layer, and grounding design. To avoid signal crosstalk during experimental testing. We use SMA interfaces and coaxial cables to connect the oscilloscope and signal generator. Our laboratory uses a complete set of SIGLENT instruments for measurement. The Oscilloscope is SDS2202X Plus, the Function Waveform Generator is SDG 2082X, the Programmable DC Power Supply uses SPD3303X-E, and the Digital Multimeter uses SDM3055X-E.

References

  1. [1]R. El-Ganainy, K.G. Makris, M. Khajavikhan, Z.H. Musslimani, S. Rotter, D.N. Christodoulides, Non-Hermitian physics and PT symmetry, Nat. Phys. 14, 11-19 (2018).
  2. [2]M.A. Miri, A. Alu, Exceptional points in optics and photonics, Science 363 (2019).DOI
  3. [3]D. Leykam, K.Y. Bliokh, C. Huang, Y.D. Chong, F. Nori, Edge Modes, Degeneracies, and Topological Numbers in Non-Hermitian Systems, Phys. Rev. Lett. 118, 040401 (2017).DOI
  4. [4]Z. Gong, Y. Ashida, K. Kawabata, K. Takasan, S. Higashikawa, M. Ueda, Topological Phases of Non-Hermitian Systems, Phys. Rev. X 8 (2018).DOI
  5. [5]S. Yao, Z. Wang, Edge states and topological invariants of non-Hermitian systems, Phys. Rev. Lett. 121, 086803 (2018).DOI
  6. [6]F.K. Kunst, E. Edvardsson, J.C. Budich, E.J. Bergholtz, Biorthogonal bulk-boundary correspondence in non-Hermitian systems, Phys. Rev. Lett. 121, 026808 (2018).DOI
  7. [7]S. Yao, F. Song, Z. Wang, Non-hermitian chern bands, Phys. Rev. Lett. 121, 136802 (2018).DOI
  8. [8]H. Jiang, C. Yang, S. Chen, Topological invariants and phase diagrams for one-dimensional two-band non-Hermitian systems without chiral symmetry, Phys. Rev. A 98, 052116 (2018).DOI
  9. [9]B. Wang, T. Chen, X. Zhang, Observation of Novel Robust Edge States in Dissipative Non - Hermitian Quantum Walks, Laser Photonics Rev. 14, 2000092 (2020).DOI
  10. [10]H. Hodaei, A.U. Hassan, S. WitteK, H. Garcia-Gracia, R. El-Ganainy, D.N. Christodoulides, M. Khajavikhan, Enhanced sensitivity at higher-order exceptional points, Nature 548, 187-191 (2017).DOI
  11. [11]S. Wang, B. Hou, W. Lu, Y. Chen, Z. Zhang, C.T. Chan, Arbitrary order exceptional point induced by photonic spin–orbit interaction in coupled resonators, Nat. Commun. 10, 832 (2019).DOI
  12. [12]X. Shen, K. Pan, X. Wang, H. Jiang, X. Zhou, Gain and loss induced higher-order exceptional points in a non-Hermitian electrical circuit, J. Phys. D: Appl. Phys. 57, 065102 (2023).DOI
  13. [13]H. Zhang, T. Chen, L. Li, C.H. Lee, X. Zhang, Electrical circuit realization of topological switching for the non-Hermitian skin effect, Phys. Rev. B 107, 085426 (2023).DOI
  14. [14]L. Li, C.H. Lee, S. Mu, J. Gong, Critical non-Hermitian skin effect, Nat. Commun. 11, 5491 (2020).DOI
  15. [15]D. Zou, T. Chen, W. He, J. Bao, C.H. Lee, H. Sun, X. Zhang, Observation of hybrid higher-order skin-topological effect in non-Hermitian topoelectrical circuits, Nat. Commun. 12, 7201 (2021).DOI
  16. [16]R. Lin, T. Tai, L. Li, C.H. Lee, Topological non-Hermitian skin effect, Front. Phys. 18, 53605 (2023).DOI
  17. [17]S. Rafi-Ul-Islam, Z.B. Siu, H. Sahin, C.H. Lee, M.B. Jalil, Unconventional skin modes in generalized topoelectrical circuits with multiple asymmetric couplings, Phys. Rev. Res. 4, 043108 (2022).
  18. [18]X. Zhang, T. Zhang, M.-H. Lu, Y.-F. Chen, A review on non-Hermitian skin effect, Adv. Phys. X 7, 2109431 (2022).arxiv.org/abs/2205.08037
  19. [19]S. Longhi, Unraveling the non-Hermitian skin effect in dissipative systems, Phys. Rev. B 102, 201103 (2020).DOI
  20. [20]X. Zhu, H. Wang, S.K. Gupta, H. Zhang, B. Xie, M. Lu, Y. Chen, Photonic non-Hermitian skin effect and non-Bloch bulk-boundary correspondence, Phys. Rev. Res. 2, 013280 (2020).DOI
  21. [21]L. Zhang, Y. Yang, Y. Ge, Y.-J. Guan, Q. Chen, Q. Yan, F. Chen, R. Xi, Y. Li, D. Jia, Acoustic non-Hermitian skin effect from twisted winding topology, Nat. Commun. 12, 6297 (2021).DOI
  22. [22]Q. Liang, D. Xie, Z. Dong, H. Li, H. Li, B. Gadway, W. Yi, B. Yan, Dynamic signatures of non-Hermitian skin effect and topology in ultracold atoms, Phys. Rev. Lett. 129, 070401 (2022).
  23. [23]S. Longhi, Non-Hermitian skin effect and self-acceleration, Phys. Rev. B 105, 245143 (2022).DOI
  24. [24]J.J. Zhong, K. Wang, Y. Park, V. Asadchy, C.C. Wojcik, A. Dutt, S. Fan, Nontrivial point-gap topology and non-Hermitian skin effect in photonic crystals, Phys. Rev. B 104, 125416 (2021).
  25. [25]H. Yang, Z.-X. Li, Y. Liu, Y. Cao, P. Yan, Observation of symmetry-protected zero modes in topological circuits, Phys. Rev. Res. 2, 022028 (2020).DOI
  26. [26]W. Deng, T. Chen, X. Zhang, Nth power root topological phases in Hermitian and non-Hermitian systems, Phys. Rev. Res. 4, 033109 (2022).arxiv.org/abs/2204.05714
  27. [27]T.T. Helbig, T. Hofmann, S. Imhof, M. Abdelghany, T. Kiessling, L. Molenkamp, C. Lee, A. Szameit, M. Greiter, R. Thomale, Generalized bulk–boundary correspondence in non-Hermitian topoelectrical circuits, Nat. Phys. 16, 747-750 (2020).DOI
  28. [28]J. Wu, X. Huang, Y. Yang, W. Deng, J. Lu, W. Deng, Z. Liu, Non-Hermitian second-order topology induced by resistances in electric circuits, Phys. Rev. B 105, 195127 (2022).DOI
  29. [29]T. Hofmann, T. Helbig, C.H. Lee, M. Greiter, R. Thomale, Chiral voltage propagation and calibration in a topoelectrical Chern circuit, Phys. Rev. Lett. 122, 247702 (2019).DOI
  30. [30]C. Tang, H. Yang, L. Song, X. Yao, P. Yan, Y. Cao, Competition of non-Hermitian skin effect and topological localization of corner states observed in circuits, Phys. Rev. B 108, 035410 (2023).DOI
  31. [31]C.H. Lee, S. Imhof, C. Berger, F. Bayer, J. Brehm, L.W. Molenkamp, T. Kiessling, R. Thomale, Topoelectrical circuits, Commun. Phys. 1, 39 (2018).
  32. [32]S. Imhof, C. Berger, F. Bayer, J. Brehm, L.W. Molenkamp, T. Kiessling, F. Schindler, C.H. Lee, M. Greiter, T. Neupert, Topoelectrical-circuit realization of topological corner modes, Nat. Phys. 14, 925-929 (2018).DOI
  33. [33]T. Hofmann, T. Helbig, F. Schindler, N. Salgo, M. Brzezińska, M. Greiter, T. Kiessling, D. Wolf, A. Vollhardt, A. Kabaši, Reciprocal skin effect and its realization in a topoelectrical circuit, Phys. Rev. Res. 2, 023265 (2020).DOI
  34. [34]M. Serra-Garcia, R. Süsstrunk, S.D. Huber, Observation of quadrupole transitions and edge mode topology in an LC circuit network, Phys. Rev. B 99, 020304 (2019).
  35. [35]M. Ezawa, Higher-order topological electric circuits and topological corner resonance on the breathing kagome and pyrochlore lattices, Phys. Rev. B 98, 201402 (2018).DOI
  36. [36]J. Wu, X. Huang, J. Lu, Y. Wu, W. Deng, F. Li, Z. Liu, Observation of corner states in second-order topological electric circuits, Phys. Rev. B 102, 104109 (2020).DOI
  37. [37]M.P. Do Carmo, J. Flaherty Francis, Riemannian geometry, Springer1992.
  38. [38]A. Einstein, The general theory of relativity, The Meaning of Relativity, Springer1922, pp. 54-75.DOI
  39. [39]X. Li, X. Li, S.D. Sarma, Mobility edges in one-dimensional bichromatic incommensurate potentials, Phys. Rev. B 96, 085119 (2017).DOI
  40. [40]S. Roy, T. Mishra, B. Tanatar, S. Basu, Reentrant localization transition in a quasiperiodic chain, Phys. Rev. Lett. 126, 106803 (2021).DOI
  41. [41]C.-A. Li, S.-B. Zhang, J.C. Budich, B. Trauzettel, Transition from metal to higher-order topological insulator driven by random flux, Phys. Rev. B 106, L081410 (2022).DOI
  42. [42]H. Jiang, C.H. Lee, Dimensional transmutation from non-hermiticity, Phys. Rev. Lett. 131, 076401 (2023).DOI

Paper details

vlnc:W_7b52pmzn
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents