We present an analytical study for predicting the finger width of the Saffman-Taylor finger in a tapered Hele-Shaw cell. We consider a rectilinear geometry with a constant depth gradient and apply analytical techniques of singular perturbation analysis and WKB approximation to derive an expression for the finger selection mechanism for such tapered Hele-Shaw cells with small depth gradients. We establish Λ- \frac{1}{2} \sim f(α) Ca_m^{2/3} \quad \mbox{as} \quad Ca_m \rightarrow 0, \;\;\; \mbox{and} \;\;\; \lvert α\rvert \ll 1. Here, Λ is the dimensionless finger width, Cam denotes the modified Capillary parameter, and f(α) is a linear function of the gap gradient α, such that f(α=0)=1 recovering the results of parallel Hele-Shaw cell (Hong and Langer \cite{hong1986analytic}, Combescot et al. \cite{Combescot1986}, Shraiman \cite{shraiman1986velocity}). Our findings indicate that the Hele-Shaw cell gap gradient plays a crucial role in determining Λ, allowing for control over fingering instabilities such that the single-finger steady state can be stabilised or destabilised depending on the sign of the gradient, compared to the standard Hele-Shaw cell. The theoretical estimates reveal excellent agreement with experimental finger-width data and predictions from linear stability analyses.
Introduction
Viscous fingering (VF) instability is a fundamental interfacial instability in hydrodynamic systems and represents a canonical mechanism for spontaneous pattern formation in viscous flows [4, 5, 6]. It has been extensively investigated within the framework of interfacial hydrodynamics [4, 7], nonlinear stability theory [8], and pattern selection [1, 2, 9, 10] across multiple disciplines. The instability was first demonstrated experimentally in 1958 by Saffman and Taylor [5] in a rectilinear Hele–Shaw cell, composed of two parallel glass plates, separated by a narrow uniform gap. Subsequently, the problem has been extensively studied in radial Hele–Shaw geometries [11]. In the radial configuration, Hele–Shaw flows take place when the less viscous fluid is injected at a constant injection rate at the centre of the cell, and drives the more viscous fluid radially outwards. The gap-averaged velocity in a Hele–Shaw cell [12] is mathematically equivalent to a two-dimensional viscous flow through a porous medium and obeys Darcy’s law; hence, it serves as a convenient laboratory analogue for porous media displacements [4, 5, 6, 7, 9]. Since then, this phenomenon—commonly referred to as the Saffman–Taylor instability or pore-scale viscous fingering—has formed the basis of a vast body of theoretical, numerical, and experimental research on interfacial instabilities.
In the classical Saffman–Taylor experiment [5], a low-viscosity Newtonian fluid (e.g., water) is injected into a cell initially filled with a more viscous Newtonian fluid (e.g., oil). Under these conditions, the initially planar interface becomes hydrodynamically unstable and develops finger-like protrusions of the invading phase into the displaced one, leading to the breakdown of the initially straight interface. At sufficiently high velocities, a single finger emerges and is stabilized by surface tension, occupying nearly half of the channel width (W) [5], a result later supported by the theoretical analysis of Pitts [13] and many others [14, 15]. However, their analytic solution without surface tension does not restrict the value of Λ[9]. The significance of the surface tension to the shape selection procedure was analytically highlighted much later by Hong and Langer in 1986 [1] and similar parallel works by others [2, 3, 16, 17], who showed that the surface tension appeared in the problem as a singular perturbative term leading to a solvability condition at the fingertip, thereby isolating a particular value from the continuum of solutions. However, the analytical solution was derived for Newtonian–Newtonian fluid displacements. In this regard, Bansal et al. [18] recently derived an analytical expression for the non-Newtonian finger profile in a parallel rectangular Hele–Shaw cell, capturing both finger-thinning and finger-widening regimes.
Applications and importance
Although viscous fingering is a paradigmatic instability in pattern formation, it arises widely in industrial and geological processes, such as enhanced oil recovery (EOR) [19, 20, 21, 22, 23] and CO2 geological sequestration [24], where it is often undesirable. In EOR, water is injected into porous oil reservoirs to displace oil; however, due to the Saffman–Taylor instability, fast-growing water fingers can reach the production well prematurely, resulting in the extraction of mostly water rather than oil and a severe reduction in recovery efficiency. This makes viscous fingering a serious morphogenetic nuisance and a major obstacle in petroleum engineering. Given the growing global demand for energy, therefore, improving oil recovery from porous reservoirs has become increasingly important [21, 22, 25, 26, 27, 28]. Because of situations like this, much attention has been devoted to devising strategies for controlling, and eventually stabilizing, the growth of such patterns in immiscible [7, 19, 29] and miscible displacements [30, 31, 32] in porous media.
Control of Viscous Fingering Instabilities
Many studies have shown that uncontrolled viscous fingering can severely compromise the efficiency of oil recovery operations, thereby motivating the development of strategies to mitigate such instabilities. One such approach is stabilization through the introduction of a depth gradient in confined geometries [33]. Early investigations in the context of thin films between rollers and spreaders examined the influence of depth gradients on the Saffman–Taylor instability [34, 35]. More recently, this problem has attracted renewed attention owing to the close analogy between flow in a Hele–Shaw cell and flow through porous media [7, 36, 37]. In this context, Al-Housseiny et al. [38, 39] reinterpreted the linear stability analysis in the presence of a small gap gradient—i.e., in an angled Hele–Shaw cell—as a viable stabilization and control mechanism. Earlier experimental work by Zhao et al. [40] demonstrated that Saffman–Taylor fingers can be either stabilized or destabilized depending on the sign of the gap gradient, while Dias and Miranda [41] extended linear stability theory to predict finger tip-splitting in the presence of variations in the flow passage.
Subsequently, a large body of work has investigated interfacial instabilities in a variety of non-standard Hele–Shaw configurations and flow geometries. In tapered and angled cells, where the plate spacing varies along the flow direction, depth gradients modify the base flow and the linear growth rates of perturbations, providing a powerful mechanism to stabilize or destabilize viscous fingering [38, 39, 41, 42, 43]. In angled Hele–Shaw cells, theoretical and numerical study on the interfacial instability has been done across a range of capillary numbers (Ca) [43] (and reference therein). In elastic or compliant Hele–Shaw cells, deformation of one or both plates leads to a dynamically evolving gap, introducing fluid–structure interaction that strongly influences finger morphology and stability [44, 45, 46]. Numerous studies have used exponential asymptotic to derive selection mechanism [47, 48, 49] and also for the case of divergent flow within a wedge shaped Hele–Shaw cell [50, 51]. Wedge-shaped and divergent geometries, in which the flow cross-section increases downstream, generate spatially varying velocities and pressure gradients that affect finger selection and tip-splitting dynamics [50, 51, 52]. Heterogeneous or structured Hele–Shaw cells, designed to mimic porous-media disorder, introduce spatial variations in permeability or gap thickness, leading to complex invasion pathways and non-classical fingering patterns [53, 54, 55]. In a lifting Hele-Shaw flow for Newtonian (due to inertia) [56] as well as non-Newtonian fluids [57] in a time-dependent manner is also analysed. Finally, time-dependent and dynamically controlled geometries enable active modulation of the gap or forcing conditions, offering additional routes for controlling the growth and evolution of interfacial instabilities [58, 59]. Unlike elastic boundaries that dynamically reshape the flow passage and affect stability, external electric fields provide an additional body force that alters interfacial stresses and electrokinetic transport, enabling active control of finger evolution [60]. Time-dependent injection rates have been shown to regulate the amplification of unstable modes by modulating the transient base state [61, 62, 63], and multilayer flow configurations can suppress fingering by distributing viscosity contrasts across multiple interfaces [64]. Material-based strategies include tailoring permeability through porous-medium structure [65], adjusting the viscosity ratio between fluids [66], and introducing suspended particles to modify effective rheology and interfacial mobility [67, 68]. Additional control can be achieved by applying external forces via rotation or magnetic fields, which modify the pressure and force balance at the interface [69, 70, 71, 72], as well as by targeted control of miscible fingering in radial geometries [73, 74]. Collectively, these approaches demonstrate that geometric, dynamical, and material modifications can profoundly alter the underlying spectral problem governing the stability of the fluid–fluid interface and the growth of interfacial disturbances.
Goals and outline of this work
In the present work, we connect, for the first time, the classical solvability theory of viscous fingering with the geometric control paradigm of tapered Hele–Shaw cells. While solvability and WKB analyses have successfully explained finger selection in parallel cells [1, 18, 75], adding depth gradients have been shown to influence linear stability and finger dynamics strongly [38, 39, 40, 41]. These two frameworks have remained theoretically disconnected. Motivated by these observations, we seek to establish a unified theoretical description that incorporates geometric tapering into the solvability framework. Here, we develop a systematic solvability formulation for Saffman–Taylor fingering in a tapered geometry, demonstrating how a depth gradient enters the selection problem as a new control parameter. We show that even weak tapering breaks the degeneracy of the classical solutions and shifts the selected finger width through a modified capillary–geometry balance, thereby enabling geometric control of nonlinear pattern selection.
This study focuses on two main objectives. First, it provides a clear and systematic derivation of the solvability condition governing pattern selection in the Saffman–Taylor problem within a tapered Hele–Shaw cell, following the framework developed in earlier works [18, 75], [38, 39, 40]. Second, it demonstrates that the selected finger width Λ, which depends on the nondimensional depth gradient and the modified capillary parameter Cam, is sensitive to the imposed depth variation. A slight departure from parallel geometry results in a noticeable shift in finger selection, consistent with experimental findings and linear stability analysis [38, 39, 40].
The paper is organised as follows. In Section 2, we derive the viscous fingering equations in the physical plane and transform them into the potential and conformal planes, leading to a linear inhomogeneous integro-differential equation. This equation is then analysed in Section 3 using the solvability theory and the WKB approximation to obtain the main analytical results. Section 4 presents and validates these results through comparisons with in silico simulations and in vitro experiments reported in the literature, followed by the concluding remarks.
Problem formulation
A conventional Hele–Shaw cell consists of two parallel plates separated by a small gap h0 and filled with a viscous fluid F1 with viscosity, μ. In a rectilinear configuration, this immiscible fluid F1 is displaced (at constant velocity) by an invading, immiscible fluid F2, with surface tension ν acting at the interface.
In the present study, we examine the displacement of one fluid by another in a Hele–Shaw cell where the plates are not parallel; instead, they are separated by a slight depth gradient α, as illustrated in Figure 1(a). Because the plates are nearly horizontal (∣α∣≪1), gravitational effects can be ignored relative to viscous forces. The cell has a depth profile h(x)=h0+αx, a width W, and a length L, such that L≫W≫h(x), representing either a slowly diverging α>0 or converging (α<0) geometry along the flow direction (see Figure 1(b)). In this study, we seek to identify the effect of a small depth gradient ∣α∣≪1 on the stability of a uniform interface, which is located at x=0 and is advancing in the Hele–Shaw cell at a velocity U.
Figure 1. (a) A schematic illustrating the top view of the fluid displacement in a rectilinear tapered Hele–Shaw cell. (b) Schematics of the side view of the cell illustrating a positive and a negative depth gradient along the flow direction.
Figure 2. A schematic diagram of a Saffman-Taylor finger in a laboratory frame, assumed symmetric about the x~-axis (Top view)
Derivation of the viscous fingering equations in the physical plane
Since L≫W≫h(x), the slow flow of an incompressible fluid in a homogeneous porous medium is governed by two-dimensional Darcy’s law and the continuity equation modified to account for the depth gradient
u=−12μh2(x)∇p,(1)
∇⋅(h(x)u)=0,(2)
where p and u=(u,v) are, respectively, the depth-averaged pressure and velocity vector. Substituting Eq. (2.1a) into Eq. (2.1b), the flows in the two fluids are described by
∇2p+h(x)3α∂x∂p=0.(3)
In the limit where ∣α∣≪1, the terms of O(α2) can be neglected and thus Eq. (3) becomes a PDE with constant coefficients,
∂x2∂2p+∂y2∂2p+h03α∂x∂p=0.(4)
The interface conditions are described in terms of the continuity of the velocity and the pressure jump across the interface. The former requires that the normal velocity of the two fluids is equal at the interface,
uF1⋅n1=uF2⋅n2,(5)
where n1 and n2 denote the outward unit normal at the interface in the F1 and F2, respectively [76, 77]. In our problem, we introduce surface tension, as it provides a natural length scale and bounds the wavelength of perturbations that could make the interface unstable. Therefore, the second condition is the Gibbs–Thomson condition, which states that the pressure at the interface decreases in proportion to the local curvature, i.e.,
−p=νκ+h2ν,(6)
where κ=1/R is the lateral curvature, where R is the radius of curvature. The second part of the dynamic boundary condition comes from the curvature (1/h) due to the depth of the HS cell. It should be noted that in our case, the fluid F1 is perfectly wetting. Assuming x-direction as the direction of the flow, we have
∂y∂p=0
at the side walls of the channel y=±w, where w is half of the channel width W (w=W/2). This is because the viscous fluid cannot penetrate the rigid walls forming the channel. Far away from the finger, the flow becomes uniform and unidirectional along the length of the cell, i.e., u=(U,0), and ∂x∂px→∞=−h212μU.
Eqs. (2.1a)–(2.3) together with the boundary conditions (2.4) and (2.5) constitute the equations of motion of the problem.
Transformation of the tapered cell into an infinite strip
We define ϕ=−12μh3p, where p=pF1−pF2 such that
u=h∇ϕ.(7)
The scalar function ϕ can be interpreted as a velocity potential that satisfies Darcy’s law (2.1a) in the leading order. The deviation from Darcy’s law is O(α). Here, we discuss finger selection in a tapered HS cell due to this geometric perturbation α. Since the flow is two-dimensional and obeys Laplace’s equation
∇2ϕ=0,(8)
the complex potential G=ϕ+iψ is an analytic function of z=x+iy. In these variables, the thermodynamic boundary condition is given by
ϕ=12μh3(Rν+h2v).(9)
From (5), the kinematic boundary condition is given by
h1∂n∂ϕ=Usinθ~,(10)
where θ~ is the angle between the x–axis and n denotes the outward normal from the fluid F2 to fluid F1. The interface conditions given by Eqs. (2.8) and (2.9) are on the advancing finger. On the walls, the boundary conditions are given by
ϕϕ→UΛxw→0as x→∞,−w<y<w,as x→−∞,wΛ<∣y∣<w.(11)
Here, we use the fact that h(x)≪w. The system is governed by Laplace’s equation (2.7) together with the boundary conditions (2.8)–(2.10).
Next, we choose to work in a frame of reference moving with the interface (say, located at x0=Ut) such that the origin is located at the fingertip and introduce the dimensionless parameters, using w and (1−Λ)Uw as length and velocity scales, respectively, as
[1]DC Hong and JS Langer. Analytic theory of the selection mechanism in the saffman-taylor problem. Physical review letters, 56(19):2032, 1986.pubmed.ncbi.nlm.nih.gov/10032840
[2]Roland Combescot, Thierry Dombre, Vincent Hakim, Yves Pomeau, and Alain Pumir. Shape selection of saffman-taylor fingers. Physical Review Letters, 56:2036–2039, 1986.pubmed.ncbi.nlm.nih.gov/10032841
[3]Boris I Shraiman. Velocity selection and the saffman-taylor problem. Physical review letters, 56(19):2028, 1986.pubmed.ncbi.nlm.nih.gov/10032839
[4]S Hill et al. Channeling in packed columns. Chemical Engineering Science, 1(6):247–253, 1952.DOI
[5]Philip Geoffrey Saffman and Geoffrey Ingram Taylor. The penetration of a fluid into a porous medium or hele-shaw cell containing a more viscous liquid. Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 245(1242):312–329, 1958.
[6]RL Chuoke, P Van Meurs, and C. van der Poel. The instability of slow, immiscible, viscous liquid-liquid displacements in permeable media. Transactions of the AIME, 216(01):188–194, 1959.DOI
[7]George M Homsy. Viscous fingering in porous media. Annual review of fluid mechanics, 19(1):271–311, 1987.
[9]JW McLean and PG Saffman. The effect of surface tension on the shape of fingers in a hele shaw cell. Journal of Fluid Mechanics, 102:455–469, 1981.
[10]DC Hong and JS Langer. Pattern selection and tip perturbations in the saffman-taylor problem. Physical Review A, 36(5):2325, 1987.pubmed.ncbi.nlm.nih.gov/9899125
[11]H Thomé, Marc Rabaud, V Hakim, and Y Couder. The saffman-taylor instability: From the linear to the circular geometry. Physics of Fluids A: Fluid Dynamics, 1(2):224–240, 1989.DOI
[12]PG Saffman. Viscous fingering in hele-shaw cells. Journal of Fluid Mechanics, 173:73–94, 1986.DOI
[13]E Pitts. Penetration of fluid into a hele-shaw cell: The saffman–taylor experiment. Journal of fluid mechanics, 97(1):53–64, 1980.DOI
[14]P Tabeling and A Libchaber. Film draining and the saffman-taylor problem. Physical Review A, 33(1):794, 1986.pubmed.ncbi.nlm.nih.gov/9896688
[15]P Tabeling, G Zocchi, and A Libchaber. An experimental study of the saffman-taylor instability. Journal of Fluid Mechanics, 177:67–82, 1987.
[16]P Saffman Tanveer. The effect of surface tension on the shape of a hele–shaw cell bubble. The Physics of fluids, 29(11):3537–3548, 1986.DOI
[17]David Bensimon, Leo P Kadanoff, Shoudan Liang, Boris I Shraiman, and Chao Tang. Viscous flows in two dimensions. Reviews of Modern Physics, 58(4):977, 1986.DOI
[18]Diksha Bansal, Dipa Ghosh, and Sarthok Sircar. Selection mechanism in non-newtonian saffman–taylor fingers. SIAM Journal on Applied Mathematics, 83(2):329–353, 2023.DOI
[19]Sheldon B Gorell and GM Homsy. A theory of the optimal policy of oil recovery by secondary displacement processes. SIAM Journal on Applied Mathematics, 43(1):79–98, 1983.DOI
[20]Larry W Lake. Enhanced oil recovery. 1988.
[21]SM Farouq Ali and Sera Thomas. The promise and problems of enhanced oil recovery methods. Journal of Canadian Petroleum Technology, 35(07), 1996.
[22]Andrés Pinilla, Miguel Asuaje, and Nicolás Ratkovich. Experimental and computational advances on the study of viscous fingering: An umbrella review. Heliyon, 7(7), 2021.DOI
[23]R Vishnudas and Abhijit Chaudhuri. A comprehensive numerical study of immiscible and miscible viscous fingers during chemical enhanced oil recovery. Fuel, 194:480–490, 2017.DOI
[24]Herbert E Huppert and Jerome A Neufeld. The fluid mechanics of carbon dioxide sequestration. Annual review of fluid mechanics, 46(1):255–272, 2014.DOI
[25]UWAYZ Al-Qarani. Numerical simulation of saffman-taylor instabilities during co 2-eor in heterogeneous reservoirs. Master's thesis, 2018.DOI
[26]Seyedeh Hosna Talebian, Rahim Masoudi, Isa Mohd Tan, and Pacelli Lidio Jose Zitha. Foam assisted co2-eor: A review of concept, challenges, and future prospects. Journal of Petroleum Science and Engineering, 120:202–215, 2014.DOI
[27]Prabir Daripa and G Paşa. An optimal viscosity profile in enhanced oil recovery by polymer flooding. International Journal of Engineering Science, 42(19-20):2029–2039, 2004.DOI
[28]Prabir Daripa and Xueru Ding. A numerical study of instability control for the design of an optimal policy of enhanced oil recovery by tertiary displacement processes. Transport in Porous Media, 93:675–703, 2012.DOI
[29]Gelu I Pasa. An existence theorem for a control problem in oil recovery. Numerical functional analysis and optimization, 17(9-10):911–923, 1996.DOI
[30]CT Tan and GM Homsy. Simulation of nonlinear viscous fingering in miscible displacement. The Physics of fluids, 31(6):1330–1338, 1988.DOI
[31]J Fernandez, P Kurowski, P Petitjeans, and E Meiburg. Density-driven unstable flows of miscible fluids in a hele-shaw cell. Journal of Fluid Mechanics, 451:239–260, 2002.DOI
[32]Satyajit Pramanik and Manmohan Mishra. Effect of péсlet number on miscible rectilinear displacement in a hele-shaw cell. Physical Review E, 91(3):033006, 2015.pubmed.ncbi.nlm.nih.gov/25871201
[33]T Maxworthy. The effect of a stabilising gradient on interface morphology. In Interfaces for the 21st Century: New Research Directions in Fluid Mechanics and Materials Science, pages 3–20. World Scientific, 2002.DOI
[34]JRA Pearson. The instability of uniform viscous flow under rollers and spreaders. Journal of Fluid Mechanics, 7(4):481–500, 1960.DOI
[35]E Pitts and J Greiller. The flow of thin liquid films between rollers. Journal of Fluid Mechanics, 11(1):33–50, 1961.DOI
[36]Robert W Zimmerman and Gudmundur S Bodvarsson. Hydraulic conductivity of rock fractures. Transport in porous media, 23(1):1–30, 1996.
[37]Jacob Bear. Dynamics of fluids in porous media. Courier Corporation, 2013.
[38]Talal T Al-Housseiny, Peichun A Tsai, and Howard A Stone. Control of interfacial instabilities using flow geometry. Nature Physics, 8(10):747–750, 2012.DOI
[39]Talal T Al-Housseiny and Howard A Stone. Controlling viscous fingering in tapered hele-shaw cells. Physics of Fluids, 25(9), 2013.DOI
[40]H Zhao, J Casademunt, C Yeung, and JV Maher. Perturbing hele-shaw flow with a small gap gradient. Physical Review A, 45(4):2455, 1992.pubmed.ncbi.nlm.nih.gov/9907268
[41]Eduardo O Dias and José A Miranda. Finger tip behavior in small gap gradient hele-shaw flows. Physical Review E—Statistical, Nonlinear, and Soft Matter Physics, 82(5):056319, 2010.pubmed.ncbi.nlm.nih.gov/21230588
[42]Eduardo O Dias and José A Miranda. Taper-induced control of viscous fingering in variable-gap hele-shaw flows. Physical Review E, 87(5):053015, 2013.pubmed.ncbi.nlm.nih.gov/23767628
[43]Daihui Lu, Federico Municchi, and Ivan C Christov. Computational analysis of interfacial dynamics in angled hele-shaw cells: instability regimes. Transport in Porous Media, 131(3):907–934, 2020.DOI
[44]Talal T Al-Housseiny, Ivan C Christov, and Howard A Stone. Two-phase fluid displacement and interfacial instabilities under elastic membranes. Physical review letters, 111(3):034502, 2013.pubmed.ncbi.nlm.nih.gov/23909329
[45]D Pihler-Puzović, Pierre Illien, Matthias Heil, and Anne Juel. Suppression of complex fingerlike patterns at the interface between air and a viscous fluid by elastic membranes. Physical review letters, 108(7):074502, 2012.pubmed.ncbi.nlm.nih.gov/22401208
[46]Draga Pihler-Puzović, Raphaël Périllat, Matthew Russell, Anne Juel, and Matthias Heil. Modelling the suppression of viscous fingering in elastic-walled hele-shaw cells. Journal of Fluid Mechanics, 731:162–183, 2013.DOI
[47]SJ Chapman. On the role of Stokes lines in the selection of saffman–taylor fingers with small surface tension. European Journal of Applied Mathematics, 10(6):513–534, 1999.DOI
[48]Christopher J Lustri, Christopher C Green, and Scott W McCue. Selection of a hele-shaw bubble via exponential asymptotics. SIAM Journal on Applied Mathematics, 80(1):289–311, 2020.arxiv.org/abs/1810.11639
[49]S Jonathan Chapman, Michael C Dallaston, Serafim Kalliadasis, Philippe H Trinh, and Thomas P Witelski. The role of exponential asymptotics and complex singularities in self-similarity, transitions, and branch merging of nonlinear dynamics. Physica D: Nonlinear Phenomena, 453:133802, 2023.DOI
[50]Cecilie Andersen, Christopher J Lustri, Scott W McCue, and Philippe H Trinh. On the selection of saffman–taylor viscous fingers for divergent flow in a wedge. Journal of Fluid Mechanics, 987:A42, 2024.arxiv.org/abs/2403.08671
[51]Cecilie Andersen, Philippe H Trinh, and Jean-Marc Vanden-Broeck. Computations of viscous fingering in a wedge: selection mechanisms and capillarity-driven ripples in the small surface tension limit. Journal of Fluid Mechanics, 1013:A18, 2025.DOI
[53]Jiangping Hu, Bofu Wang, and Dejun Sun. Numerical investigation of viscous fingering in hele-shaw cell with spatially periodic variation of depth. Applied Mathematics and Mechanics, 37(1):45–58, 2016.
[54]SJ Jackson, H Power, D Giddings, and D Stevens. The stability of immiscible viscous fingering in hele-shaw cells with spatially varying permeability. Computer Methods in Applied Mechanics and Engineering, 320:606–632, 2017.DOI
[55]Grégoire Bongrand and Peichun Amy Tsai. Manipulation of viscous fingering in a radially tapered cell geometry. Physical Review E, 97(6):061101, 2018.DOI
[56]Pedro HA Anjos, Eduardo O Dias, and José A Miranda. Inertia-induced dendriticlike patterns in lifting hele-shaw flows. Physical Review Fluids, 2(1):014003, 2017.DOI
[57]Subrata K Kabiraj and Sujata Tarafdar. Finger velocities in the lifting hele–shaw cell. Physica A: Statistical Mechanics and its Applications, 328(3-4):305–314, 2003.DOI
[58]Liam C Morrow, Timothy J Moroney, and Scott W McCue. Numerical investigation of controlling interfacial instabilities in non-standard hele-shaw configurations. Journal of Fluid Mechanics, 877:1063–1097, 2019.DOI
[59]Liam C Morrow, Timothy J Moroney, Michael C Dallaston, and Scott W McCue. A review of one-phase hele-shaw flows and a level-set method for nonstandard configurations. The ANZIAM Journal, 63(3):269–307, 2021.DOI
[60]Mohammad Mirzadeh and Martin Z Bazant. Electrokinetic control of viscous fingering. Physical review letters, 119(17):174501, 2017.DOI
[61]Eduardo O Dias, Enrique Alvarez-Lacalle, Márcio S Carvalho, and José A Miranda. Minimization of viscous fluid fingering: a variational scheme for optimal flow rates. Physical review letters, 109(14):144502, 2012.pubmed.ncbi.nlm.nih.gov/23083248
[62]Craig Gin and Prabir Daripa. Stability results for multi-layer radial hele-shaw and porous media flows. Physics of Fluids, 27(1), 2015.DOI
[63]Craig Gin and Prabir Daripa. Time-dependent injection strategies for multilayer hele-shaw and porous media flows. Physical Review Fluids, 6(3):033901, 2021.DOI
[64]Prabir Daripa and Xuanru Ding. Universal stability properties for multilayer hele-shaw flows and application to instability control. SIAM Journal on Applied Mathematics, 72(5):1667–1685, 2012.DOI
[65]C-T Tan and GM Homsy. Viscous fingering with permeability heterogeneity. Physics of Fluids A: Fluid Dynamics, 4(6):1099–1101, 1992.DOI
[66]Pedro HA Anjos, Eduardo O Dias, and José A Miranda. Radial fingering under arbitrary viscosity and density ratios. Physical Review Fluids, 2(8):084004, 2017.DOI
[67]Feng Xu, Jungchul Kim, and Sungyon Lee. Particle-induced viscous fingering. Journal of Non-Newtonian Fluid Mechanics, 238:92–99, 2016.
[68]Alireza Hooshanginejad, Benjamin C Druecke, and Sungyon Lee. Stability analysis of a particle band on the fluid–fluid interface. Journal of Fluid Mechanics, 869:R2, 2019.DOI
[69]David P Jackson and José A Miranda. Controlling fingering instabilities in rotating ferrofluids. Physical Review E, 67(1):017301, 2003.pubmed.ncbi.nlm.nih.gov/12636637
[70]Enrique Alvarez-Lacalle, E Pauné, J Casademunt, and Jordi Ortín. Systematic weakly nonlinear analysis of radial viscous fingering. Physical Review E, 68(2):026308, 2003.pubmed.ncbi.nlm.nih.gov/14525106
[71]José A Miranda and Enrique Alvarez-Lacalle. Viscosity contrast effects on fingering formation in rotating hele-shaw flows. Physical Review E—Statistical, Nonlinear, and Soft Matter Physics, 72(2):026306, 2005.pubmed.ncbi.nlm.nih.gov/16196710
[72]Pedro HA Anjos, Sérgio A Lira, and José A Miranda. Fingering patterns in magnetic fluids: Perturbative solutions and the stability of exact stationary shapes. Physical Review Fluids, 3(4):044002, 2018.DOI
[73]Ching-Yao Chen, C-W Huang, L-C Wang, and José A Miranda. Controlling radial fingering patterns in miscible confined flows. Physical Review E, 82(5):056308, 2010.pubmed.ncbi.nlm.nih.gov/21230577
[74]Vandita Sharma, Sada Nand, Satyajit Pramanik, Ching-Yao Chen, and Manoranjan Mishra. Control of radial miscible viscous fingering. Journal of Fluid Mechanics, 884:A16, 2020.DOI
[75]Eugenia Corvera-Poire. Anisotropic viscous fingering. Ph. D. Thesis, 1995.DOI
[76]Eugenia Corvera, Hong Guo, and David Jasnow. Steady states for viscous fingers with anisotropic surface tension. Physical Review E, 52(4):4063, 1995.pubmed.ncbi.nlm.nih.gov/9963879
[77]Eugenia Corvera, Hong Guo, and David Jasnow. Saffman-taylor fingers with anisotropic surface tension. Physica A: Statistical Mechanics and its Applications, 220(1-2):48–59, 1995.
[78]Anke Lindner, Daniel Bonn, and Jacques Meunier. Viscous fingering in complex fluids. Journal of Physics: Condensed Matter, 12(8A):A477, 2000.