betaFeedback

WorksPhysics and Astronomy

Polarization signatures of mixed scalar - pseudoscalar ALP - photon couplings in intense laser pulses

Abstract

We investigate photon-to-axion-like-particle (ALP) conversion in a finite, linearly polarized laser pulse for a single ALP field with simultaneous scalar-type and pseudoscalar-type couplings to photons. Varying the collision angle between the strong pulse and the probe provides a continuous kinematic scan of the resonant ALP mass. For fixed kinematics in this setting, the scalar-type and pseudoscalar-type ALP conversion amplitudes interfere coherently, making both the photon-to-ALP conversion probability and the polarization rotation depend on the difference between the probe polarization angle αα and the coupling angle θgθ_g. Conversion is maximal at ∣α−θg∣=90∘|α-θ_g|=90^\circ, where the polarization rotation vanishes, while the rotation magnitude peaks at α−θg=45∘α-θ_g=45^\circ modulo 90∘90^\circ, where conversion is half-maximal. These complementary polarization-angle dependences provide polarization-resolved signatures of mixed scalar–pseudoscalar photon couplings.

Introduction

The Peccei–Quinn mechanism provides a dynamical solution to the strong CP problem of quantum chromodynamics and predicts the axion [1, 2, 3, 4, 5]. The axion is also a well-motivated dark-matter candidate, and its coupling to photons underlies a broad range of laboratory, astrophysical, and cosmological searches [6, 7, 8, 9, 10]. More generally, axion-like particles (ALPs) arise in many extensions of the Standard Model without obeying the QCD-axion relation between mass and coupling strength [11, 12, 13, 14, 15]. Astrophysical and cosmological observations constrain ALP–photon couplings through stellar evolution, spectral measurements, and polarization observables [16, 17, 18, 19, 20].

Laboratory experiments search for axions and ALPs and test their interactions with photons over a broad range of parameters [21, 22, 23, 24, 25, 26]. In external electromagnetic fields, real photon-to-ALP conversion can induce polarization-dependent attenuation (dichroism), whereas photon–ALP mixing can produce dispersive modifications to light propagation and give rise to birefringence [7, 27, 28]. These absorptive and dispersive effects can appear as changes in intensity, polarization orientation, and ellipticity [29, 30, 31, 32].

High-intensity laser pulses provide a controlled laboratory setting in which probe photons can exchange energy and momentum with a background electromagnetic field, enabling conversion into on-shell ALPs. Early laser-based studies identified resonantly enhanced photon-to-ALP conversion at masses set by the optical frequencies and the associated possibility of frequency-shifted probe photons [33]. Subsequent work investigated scalar-type and pseudoscalar-type interactions of a spin-zero field as separate cases and derived their dichroic and birefringent signatures, including real-particle production near resonance [34]. Further studies incorporated QED vacuum-polarization effects in the pseudoscalar case [35] and generalized the polarimetric treatment to arbitrary plane-wave pulses, quantifying the dependence of polarization rotation and ellipticity on the pulse profile [36].

These studies establish the strong-laser framework for ALP conversion and polarization effects, but have generally treated scalar-type and pseudoscalar-type photon couplings as separate cases. In the present work, both interactions couple to the same ALP field and therefore contribute coherently to the same photon-to-ALP conversion amplitude. We study this interference in a finite, linearly polarized laser pulse, treating the probe polarization angle and collision angle as complementary controls. This mixed-coupling setup introduces an interference-induced polarization structure that does not arise when the scalar and pseudoscalar interactions are treated separately.

Three features are central to the analysis. First, coherent interference between the scalar-type and pseudoscalar-type amplitudes selects orthogonal probe-polarization directions of vanishing and maximal conversion, allowing polarization-angle scans to probe the relative scalar–pseudoscalar coupling composition. Second, varying the collision angle provides a continuous kinematic scan of the resonantly enhanced ALP mass. Third, polarization-selective depletion through real ALP production induces dichroic rotation: the rotation vanishes along both the dark and bright polarization directions and reaches its largest magnitude at intermediate orientations, where the conversion probability is half of its polarization maximum. We focus on this absorptive rotation and do not include dispersive birefringence.

The paper is organized as follows. Section II introduces the effective interaction and the probe–laser collision geometry. Section III derives the polarization structure of the conversion probability and the finite-pulse resonance condition. Section IV introduces the coupling-selected polarization basis and analyzes the resulting dichroic rotation. Our conclusions are summarized in § 1.4.

ALP–photon interaction and collision geometry

Mixed scalar–pseudoscalar photon couplings have been explored in collider and photon-fusion studies, where angular and polarization correlations provide sensitivity to the relative scalar and pseudoscalar interaction components [37, 38, 39]. By contrast, strong-laser analyses have generally treated scalar-type and pseudoscalar-type ALP couplings as separate cases; for example, Ref. [34] studied their respective optical signatures in a counterpropagating probe–laser configuration. In the present framework, both interaction structures couple to the same ALP field and therefore contribute coherently to the same photon-to-ALP conversion process. We retain the finite-pulse character of the strong field while allowing the collision geometry to vary rather than restricting the analysis to a fixed counterpropagating configuration.

ALP–photon interaction

We consider a single real ALP field ϕ(x)\phi(x) coupled to photons through simultaneous scalar-type and pseudoscalar-type interactions, with coupling strengths gsg_s and gpg_p, respectively. It is convenient to parameterize the two couplings as

gs=gsin⁡θg,gp=gcos⁡θg,g=gs2+gp2,0∘≤θg≤90∘,(1)\begin{aligned} g_s &= g\sin\theta_g,\qquad g_p = g\cos\theta_g,\\ g &= \sqrt{g_s^2+g_p^2},\qquad0^\circ\le\theta_g \le90^\circ, \tag*{(1)} \end{aligned}

where gg sets the overall coupling strength, while θg\theta_g determines the relative scalar-type and pseudoscalar-type coupling composition. The endpoints θg=0∘\theta_g = 0^\circ and 90∘90^\circ correspond to the pure pseudoscalar-type and pure scalar-type limits, respectively, whereas intermediate values describe the mixed-coupling regime considered below.

It is noticed that in present work we consider only the absorptive effect associated with real photon-to-ALP conversion. The QED vacuum birefringence and other dispersive modifications of the outgoing probe polarization are not included in the present calculation. Accordingly the involved term of effective Lagrangian is associated to the ALP–photon interaction as below

Lint=−14πgsϕF−14πgpϕG,(2)\mathcal{L}_{\mathrm{int}}=-\frac{1}{4\pi}g_s\phi\mathcal{F}-\frac{1}{4\pi}g_p\phi\mathcal{G}, \tag*{(2)}

where ϕ\phi is treated as a generic ALP field without assigning a definite CP parity. If ϕ\phi is assigned the conventional pseudoscalar CP parity, the gpg_p interaction is CP conserving, whereas the gsg_s interaction is CP violating. The

electromagnetic invariants are defined by

F=14FμνFμν=−12(E2−B2),G=14FμνF~μν=−E⋅B,(3)\begin{aligned} \mathcal{F} &= \frac{1}{4}F_{\mu\nu}F^{\mu\nu}=-\frac{1}{2}\left(\mathbf{E}^2-\mathbf{B}^2\right),\\ \mathcal{G} &= \frac{1}{4}F_{\mu\nu}\widetilde{F}^{\mu\nu}=-\mathbf{E}\cdot\mathbf{B}, \tag*{(3)} \end{aligned}

with the dual tensor F~μν=12ϵμνρσFρσ\widetilde{F}^{\mu\nu}=\frac{1}{2}\epsilon^{\mu\nu\rho\sigma}F_{\rho\sigma} and ϵ0123=+1\epsilon^{0123}=+1.

Collision geometry and polarization basis

The setup consists of a strong, linearly polarized laser pulse colliding with a weak probe photon at a variable collision angle. We denote by θ\theta the angle between their propagation directions and take 0∘<θ<180∘0^\circ< \theta< 180^\circ, with θ=180∘\theta=180^\circ corresponding to a head-on collision. The strong laser propagates along +y+y, with its electric field polarized along +z+z, while the probe wave vector lies in the xx–yy plane. The collision geometry and polarization convention are illustrated in Figure 1. The corresponding wave vectors are parameterized as

Figure 1. Collision geometry and polarization convention. The strong-laser quantities (k0,E0,B0)(\mathbf{k}_0,\mathbf{E}_0,\mathbf{B}_0) are shown in gold, while the probe quantities (k,E,B)(\mathbf{k},\mathbf{E},\mathbf{B}) are shown in blue. The strong laser propagates along +y+y, with its electric field polarized along +z+z, while the probe wave vector lies in the xx–yy plane and forms the collision angle θ\theta with the laser. The angle α\alpha specifies the probe polarization relative to the strong-laser electric-field direction.

k0μ=ω0(1,0,1,0),kμ=ω(1,sin⁡θ,cos⁡θ,0),(4)k_0^\mu=\omega_0(1,0,1,0),\qquad k^\mu=\omega(1,\sin\theta,\cos\theta,0), \tag*{(4)}

where ω0\omega_0 and ω\omega are the angular frequencies of the strong-laser carrier and the probe photon, respectively. Since k⋅k0=ωω0(1−cos⁡θ)k\cdot k_0=\omega\omega_0(1-\cos\theta), the co-propagating limit θ=0∘\theta=0^\circ gives a vanishing probe–background invariant and is therefore excluded. Varying θ\theta continuously changes the collision invariant and hence the phase-matching condition for photon-to-ALP conversion.

For the probe, we introduce an orthonormal polarization basis transverse to k\mathbf{k},

e^∥=z^,e^⊥=cos⁡θ x^−sin⁡θ y^,(5)\hat{\mathbf{e}}_\parallel=\hat{\mathbf{z}},\qquad\hat{\mathbf{e}}_\perp=\cos\theta\,\hat{\mathbf{x}}-\sin\theta\,\hat{\mathbf{y}}, \tag*{(5)}

where e^∥\hat{\mathbf{e}}_{\parallel} coincides with the strong-laser electric-field polarization, while e^⊥\hat{\mathbf{e}}_{\perp} is the orthogonal transverse direction. The probe polarization angle is denoted by α\alpha, with 0∘≤α≤180∘0^\circ\le\alpha\le180^\circ.

The unit vector along the probe propagation direction is

n^=k∣k∣=sin⁡θ x^+cos⁡θ y^.(6)\hat{\mathbf{n}}=\frac{\mathbf{k}}{|\mathbf{k}|}=\sin\theta\,\hat{\mathbf{x}}+\cos\theta\,\hat{\mathbf{y}}. \tag*{(6)}

For a plane-wave probe, bα=n^×ϵα\mathbf{b}_{\alpha}=\hat{\mathbf{n}}\times\boldsymbol{\epsilon}_{\alpha}, so the electric- and magnetic-field polarization unit vectors are

ϵα=cos⁡α z^+sin⁡α(cos⁡θ x^−sin⁡θ y^),\boldsymbol{\epsilon}_{\alpha}=\cos\alpha\,\hat{\mathbf{z}}+\sin\alpha\left(\cos\theta\,\hat{\mathbf{x}}-\sin\theta\,\hat{\mathbf{y}}\right),
bα=cos⁡α(cos⁡θ x^−sin⁡θ y^)−sin⁡α z^.(7)\mathbf{b}_{\alpha}=\cos\alpha\left(\cos\theta\,\hat{\mathbf{x}}-\sin\theta\,\hat{\mathbf{y}}\right)-\sin\alpha\,\hat{\mathbf{z}}. \tag*{(7)}

By construction, (ϵα,bα,n^)(\boldsymbol{\epsilon}_{\alpha},\mathbf{b}_{\alpha},\hat{\mathbf{n}}) forms a right-handed orthonormal triad.

Within this geometry, the angles θ\theta and α\alpha control distinct aspects of the conversion process. The collision angle changes the probe–background invariant and therefore the kinematic phase matching, whereas the probe polarization angle changes the polarization projections entering the scalar-type and pseudoscalar-type contributions to the conversion amplitude. This separation provides independent kinematic and polarization controls for the analysis below.

Photon-to-ALP conversion and finite-pulse resonance

Coherent conversion amplitude and probability

We consider the leading-order conversion of a quantized probe photon into a real, on-shell ALP in the prescribed classical laser background shown in Figure 2. The strong pulse is treated as an external field, with depletion and backreaction neglected, while the probe photon and produced ALP are quantized. For ease of comparison with the finite-pulse treatment of Ref. [34], we follow the same pulse-phase and Fourier-transform conventions where applicable. We model the background as a linearly polarized pulsed plane wave,

Figure 2. Leading-order photon-to-ALP conversion in the prescribed classical laser background. A quantized probe photon γ(k)\gamma(k) converts into an on-shell ALP ϕ(p)\phi(p) through its interaction with the external field.

E0(φ)=E0(φ) z^,B0(φ)=E0(φ) x^,(8)\mathbf{E}_0(\varphi)=\mathcal{E}_0(\varphi)\,\hat{\mathbf{z}},\qquad\mathbf{B}_0(\varphi)=\mathcal{E}_0(\varphi)\,\hat{\mathbf{x}}, \tag*{(8)}

where E0(φ)=E0f(φ)cos⁡(φ+φCEP)\mathcal{E}_0(\varphi)=E_0 f(\varphi)\cos(\varphi+\varphi_{\mathrm{CEP}}) and φ=k0⋅x=ω0(t−y)\varphi=k_0\cdot x=\omega_0(t-y). Here E0E_0 is the peak field amplitude, f(φ)f(\varphi) is the pulse envelope, and φCEP\varphi_{\mathrm{CEP}} is the carrier-envelope phase. This pulsed plane-wave setup is a standard idealization in strong-field ALP production and conversion studies [33, 34, 40].

Writing Fμν=F0,μν+fμνF_{\mu\nu}=F_{0,\mu\nu}+f_{\mu\nu} and keeping only terms linear in the quantized probe field gives

Lint(1)=−ϕ8π(gsF0,μνfμν+gpF~0,μνfμν).(9)\mathcal{L}_{\mathrm{int}}^{(1)}=-\frac{\phi}{8\pi}\left(g_sF_{0,\mu\nu}f^{\mu\nu}+g_p\widetilde{F}_{0,\mu\nu}f^{\mu\nu}\right). \tag*{(9)}

where F0,μνF_{0,\mu\nu} is the background-field tensor and fμνf_{\mu\nu} is the quantized probe-field tensor. For the geometry of § 1.1 B, the scalar-type and pseudoscalar-type contributions enter the same transition amplitude. We define the polarization-dependent coherent coupling factor as

Γα≡gscos⁡α−gpsin⁡α=−gsin⁡(α−θg),(10)\Gamma_{\alpha}\equiv g_s\cos\alpha-g_p\sin\alpha=-g\sin(\alpha-\theta_g), \tag*{(10)}

thus Γα\Gamma_{\alpha} has the same dimensions as gsg_s and gpg_p and multiplies the common kinematic and pulse factor in the conversion amplitude. Unlike the pure scalar-type or pure pseudoscalar-type cases, both couplings contribute to the same transition amplitude and therefore interfere coherently.

The finite-pulse dependence is described by the Fourier transform GG of the envelope and by the carrier-resolved spectral amplitude HH,

G(ν)=∫−∞∞dφ f(φ)eiνφ,G(\nu)=\int_{-\infty}^{\infty}d\varphi\,f(\varphi)e^{i\nu\varphi},
H(ρ)=eiφCEPG(ρ+1)+e−iφCEPG(ρ−1).(11)H(\rho)=e^{i\varphi_{\mathrm{CEP}}}G(\rho+1)+e^{-i\varphi_{\mathrm{CEP}}}G(\rho-1). \tag*{(11)}

where ν\nu is the dimensionless Fourier variable conjugate to the laser phase φ\varphi. The function HH is introduced as a compact notation for the two carrier-shifted Fourier components. The dimensionless on-shell light-front momentum-transfer parameter is

ρ=mϕ22k⋅k0=mϕ24ωω0sin⁡2(θ/2).(12)\rho=\frac{m_{\phi}^{2}}{2k\cdot k_0}=\frac{m_{\phi}^{2}}{4\omega\omega_0\sin^{2}(\theta/2)}. \tag*{(12)}

The condition ρ=1\rho=1 corresponds to matching the carrier-frequency component of the pulse. The intermediate SS-matrix, light-front, and phase-space steps are derived explicitly in Appendix A. The resulting conversion probability is

Pγ→ϕ=Iamp16ω02sin⁡2θ2∣gscos⁡α−gpsin⁡α∣2∣H(ρ)∣2=Pmax⁡(θ,mϕ)sin⁡2(α−θg).(13)\begin{aligned} P_{\gamma\to\phi}=\frac{I_{\mathrm{amp}}}{16\omega_0^{2}}\sin^{2}\frac{\theta}{2}\left|g_s\cos\alpha-g_p\sin\alpha\right|^{2}\left|H(\rho)\right|^{2} \\ &=P_{\max}(\theta,m_{\phi})\sin^{2}(\alpha-\theta_g). \tag*{(13)} \end{aligned}

where Pmax⁡(θ,mϕ)P_{\max}(\theta,m_{\phi}) is the maximum over the probe polarization angle, attained when ∣sin⁡(α−θg)∣=1|\sin(\alpha-\theta_g)|=1:

Pmax⁡(θ,mϕ)=g2Iamp16ω02sin⁡2θ2∣H(ρ)∣2.(14)P_{\max}(\theta,m_{\phi})=\frac{g^{2}I_{\mathrm{amp}}}{16\omega_0^{2}}\sin^{2}\frac{\theta}{2}\left|H(\rho)\right|^{2}. \tag*{(14)}

Here Iamp=E02/(4π)I_{\mathrm{amp}} = E_0^2/(4\pi) denotes the peak intensity parameter defined from the field amplitude and corresponds to I0I_0 in Ref. [34]. For a many-cycle linearly polarized pulse, Iamp=2IavI_{\mathrm{amp}} = 2I_{\mathrm{av}}, where IavI_{\mathrm{av}} is the cycle-averaged peak intensity. In the head-on pure-coupling limit, Eq. (13) reduces to the finite-pulse conversion probability of Ref. [34]; the detailed normalization correspondence is shown in Appendix A.

Equation (13) makes the physical structure explicit: the pulse spectrum and collision geometry determine the common kinematic response, while the coherent scalar–pseudoscalar combination determines the polarization dependence through α−θg\alpha-\theta_g. For fixed kinematics, pulse parameters, and coupling composition, the conversion vanishes at α=θg\alpha=\theta_g and is maximal for the orthogonal direction α=θg+90∘\alpha=\theta_g+90^\circ, where Pγ→ϕ=Pmax⁡P_{\gamma\to\phi}=P_{\max}. These two orthogonal polarization directions provide a natural basis for the polarization analysis developed in Sec. IV.

Finite-pulse resonance

For a many-cycle pulse, the Fourier transform G(ν)G(\nu) of the envelope is sharply localized near ν=0\nu=0. Since ρ≥0\rho\geq0, the term G(ρ−1)G(\rho-1) is resonantly enhanced near ρ=1\rho=1, whereas G(ρ+1)G(\rho+1) remains off resonance. The corresponding carrier-frequency phase-matching condition is therefore

mres(θ)=2ωω0sin⁡θ2.(15)m_{\mathrm{res}}(\theta)=2\sqrt{\omega\omega_0}\sin\frac{\theta}{2}. \tag*{(15)}

Physically, varying the collision angle changes the light-front momentum available from the laser and therefore moves the resonant ALP mass. A head-on collision gives the largest resonant mass, whereas smaller θ\theta shifts the resonance downward and also reduces the factor sin⁡2(θ/2)\sin^2(\theta/2) in Pmax⁡P_{\max}.

ParameterSymbolValue
Strong-laser carrier frequencyω0\omega_01.55 eV
Probe-photon frequencyω\omega3.10 eV
Gaussian width parameterNN5.6
Intensity-envelope FWHMNI,FWHMN_{I,\mathrm{FWHM}}≃9.32\simeq9.32 cycles
Carrier-envelope phaseφCEP\varphi_{\mathrm{CEP}}0
Peak intensity parameterIampI_{\mathrm{amp}}102510^{25} W/cm2^2
Coupling magnitudegg1.0×10−71.0\times10^{-7} GeV−1^{-1}

Table 1. Benchmark parameters used for Figs. 3–5.

For the numerical calculations, we take the pulse envelope to be

f(φ)=exp⁡[−φ22Δφ2],Δφ=2πN.(16)f(\varphi)=\exp\left[-\frac{\varphi^2}{2\Delta\varphi^2}\right],\qquad\Delta\varphi=2\pi N. \tag*{(16)}

Here Δφ\Delta\varphi is the Gaussian envelope width in laser phase and N=Δφ/(2π)N=\Delta\varphi/(2\pi) is the corresponding dimensionless width parameter measured in carrier cycles.

The Fourier transform is G(ν)=2πΔφexp⁡[−Δφ2ν2/2]G(\nu)=\sqrt{2\pi}\Delta\varphi\exp[-\Delta\varphi^2\nu^2/2]. The intensity full width at half maximum, expressed in optical cycles, is denoted NI,FWHMN_{I,\mathrm{FWHM}} in Table I.

For the numerical illustrations, we use the benchmark parameters summarized in Table I. The ultrashort, high-power laser regime is motivated by facilities such as ELI-NP, while the adopted focal intensity is representative of the higher intensities considered for XCELS-class systems [41, 42]. These parameters are chosen to illustrate the polarization and resonance structure rather than to model a specific experimental configuration. Together with Eq. (15), the benchmark frequencies determine the resonant mass scale explored below.

For comparison, the 2024 CAST vacuum result constrains the conventional pseudoscalar axion–photon coupling to gaγ<5.8×10−11 GeV−1g_{a\gamma}<5.8\times10^{-11}\,\mathrm{GeV}^{-1} at 95% C.L. for ma≲0.02m_a\lesssim0.02 eV, while the 3^3He buffer-gas program covered 0.640.64–1.171.17 eV with an average upper limit of 3.3×10−10 GeV−13.3\times10^{-10}\,\mathrm{GeV}^{-1} at 95% C.L. [43, 44]. These limits assume a pure pseudoscalar axion–photon interaction and therefore do not directly constrain the mixed scalar–pseudoscalar coupling magnitude gg used here. Moreover, the CAST mass coverage extends only to about 1.17 eV and therefore does not cover the full several-eV mass interval considered here. We use g=10−7 GeV−1g=10^{-7}\,\mathrm{GeV}^{-1} as a reference coupling for the numerical illustrations. This choice fixes the overall signal scale while leaving the polarization and resonance structure unchanged; it is not intended as a phenomenological benchmark.

Equations (13) and (15), together with the benchmark parameters in Table I, provide the basis for the numerical results below. Rather than varying all parameters】【。 simultaneously, we exploit the factorized form of the conversion probability to separate the polarization response from the mass–angle resonance structure. We first impose the carrier-frequency resonance, mϕ=mres(θ)m_\phi=m_{\mathrm{res}}(\theta), and scan the polarization variables; we then fix the polarization on the maximal-conversion branch and scan the (mϕ,θ)(m_\phi,\theta) plane to expose the remaining kinematic and finite-pulse spectral dependence.

Figure 3 shows the first of these two representations. In each panel we set mϕ=mres(θ)m_\phi=m_{\mathrm{res}}(\theta), so that ρ=1\rho=1 and the spectral factor ∣H(1)∣2|H(1)|^2 is common to all collision angles. This removes spectral detuning, leaving the coupling-dependent polarization pattern together with the geometric sin⁡2(θ/2)\sin^2(\theta/2) scaling.

Figure 3. Photon-to-ALP conversion probability Pγ→ϕP_{\gamma\to\phi} as a function of the probe polarization angle α\alpha and coupling angle θg\theta_g for θ=90∘\theta=90^\circ, 120∘120^\circ, 150∘150^\circ, and 180∘180^\circ. In each panel, mϕ=mres(θ)m_\phi=m_{\mathrm{res}}(\theta), corresponding to ρ=1\rho=1. The white dotted and red dashed lines indicate the zero-conversion branch α=θg\alpha=\theta_g and the maximal-conversion branch α=θg+90∘\alpha=\theta_g+90^\circ, respectively. The remaining parameters are given in Table I.

The zero-conversion branch follows from the cancellation of the coherent coupling factor Γα\Gamma_\alpha; for intermediate θg\theta_g, this cancellation corresponds to destructive interference between the scalar-type and pseudoscalar-type conversion amplitudes. The orthogonal branch gives the maximum conversion probability. Thus θg\theta_g fixes the orientation of the polarization pattern, while θ\theta changes its overall magnitude through sin⁡2(θ/2)\sin^2(\theta/2) and simultaneously selects the resonant ALP mass.

To expose the complementary mass–angle response, we fix θg=45∘\theta_g=45^\circ and α=135∘\alpha=135^\circ, which lies on the maximal-conversion branch and gives sin⁡2(α−θg)=1\sin^2(\alpha-\theta_g)=1. With the polarization factor fixed at unity, Figure 4 displays the remaining kinematic and spectral dependence.

Figure 4. Photon-to-ALP conversion probability Pγ→ϕP_{\gamma\to\phi} in the (mϕ,θ)(m_\phi,\theta) plane for the maximal-conversion choice θg=45∘\theta_g=45^\circ and α=135∘\alpha=135^\circ. The red dashed curve denotes the carrier-frequency phase-matching condition ρ=1\rho=1. The inset enlarges the head-on endpoint region. The remaining parameters are listed in Table I.

The enhanced ridge in Figure 4 follows the carrier-frequency phase-matching condition ρ=1\rho=1 and hence the resonant mass given by Eq. (15). It is therefore the continuous (mϕ,θ)(m_\phi,\theta) locus of the resonant maximal-conversion configurations sampled in Figure 3. At θ=90∘\theta=90^\circ, 120∘120^\circ, 150∘150^\circ, and 180∘180^\circ, the points on this ridge reproduce the maximal-conversion values of the corresponding panels in Figure 3, demonstrating the consistency between the polarization and mass–angle representations of Eq. (13).

Along the resonant ridge, decreasing θ\theta shifts the resonance to smaller masses and reduces the peak conversion probability through the geometric factor sin⁡2(θ/2)\sin^2(\theta/2), while the spectral factor remains fixed at ∣H(1)∣2|H(1)|^2. The largest carrier-frequency resonant mass occurs for a head-on collision. For the benchmark frequencies in Table I, the corresponding head-on endpoint is mres(180∘)=4.384 eVm_{\mathrm{res}}(180^\circ)=4.384\ \mathrm{eV}, above which no carrier-frequency ρ=1\rho=1 solution exists.

The inset of Figure 4 resolves this head-on endpoint. Although the ρ=1\rho=1 curve terminates there, the finite pulse bandwidth produces a finite-width high-mass tail beyond the carrier-frequency endpoint. This tail is the off-resonant high-mass wing of the same resonance rather than a second resonance branch.

Dichroic rotation of the probe polarization

Equation (10) shows that, at leading order, the mixed coupling selects a single linear combination of the two transverse probe polarizations. The two orthogonal directions identified in § 1.2 A therefore define a natural polarization basis: we refer to the maximal-conversion direction as the bright mode and to the zero-conversion direction as the dark mode. Their orthonormal unit vectors are

e^b=sin⁡θg e^∥−cos⁡θg e^⊥,\hat{e}_{\mathrm{b}}=\sin\theta_g\,\hat{e}_{\parallel}-\cos\theta_g\,\hat{e}_{\perp},
e^d=cos⁡θg e^∥+sin⁡θg e^⊥.(17)\hat{e}_{\mathrm{d}}=\cos\theta_g\,\hat{e}_{\parallel}+\sin\theta_g\,\hat{e}_{\perp}. \tag*{(17)}

The incident probe polarization can then be decomposed as

ϵα=−sin⁡(α−θg)e^b+cos⁡(α−θg)e^d.(18)\epsilon_\alpha=-\sin(\alpha-\theta_g)\hat{e}_{\mathrm{b}}+\cos(\alpha-\theta_g)\hat{e}_{\mathrm{d}}. \tag*{(18)}

Since Γα=g e^b⋅ϵα=−gsin⁡(α−θg)\Gamma_\alpha=g\,\hat{e}_{\mathrm{b}}\cdot\epsilon_\alpha=-g\sin(\alpha-\theta_g), the conversion amplitude is determined entirely by the bright-mode component, whereas the dark mode does not contribute to real, on-shell ALP production at this order. The bright-to-dark basis thus provides a direct geometric interpretation of the factor sin⁡2(α−θg)\sin^2(\alpha-\theta_g) in Eq. (13). For later use, we denote the conversion probability of a purely bright input by

Pb(θ,mϕ)≡Pmax⁡(θ,mϕ),(19)P_{\mathrm{b}}(\theta,m_\phi)\equiv P_{\max}(\theta,m_\phi), \tag*{(19)}

with Pmax⁡P_{\max} given in Eq. (14).

This bright–dark decomposition also makes the origin of the conversion-induced polarization rotation transparent. Real ALP production selectively depletes the bright component of the probe, while the dark component remains unaffected at this order. This polarization-dependent attenuation constitutes dichroism. When both components are present, the resulting change in their relative amplitudes rotates the polarization direction of the transmitted probe.

The underlying mechanism is the same general dichroic effect familiar from conventional photon–ALP mixing in external magnetic fields [7, 45]. In the present case, however, the bright and dark directions are determined by the coherent scalar–pseudoscalar coupling composition, while the attenuation of the bright mode is governed by the finite-pulse conversion probability derived in § 1.2.

In the weak-conversion regime Pb≪1P_b \ll1, the bright-field amplitude is reduced by 1−Pb≃1−Pb/2\sqrt{1-P_b} \simeq1-P_b/2, while the dark component is unchanged. Writing the change of probe polarization angle as Δα≡αout−α\Delta\alpha\equiv\alpha_{\mathrm{out}}-\alpha, one obtains

Δα=−Pb4sin⁡[2(α−θg)].(20)\Delta\alpha=-\frac{P_b}{4}\sin[2(\alpha-\theta_g)]. \tag*{(20)}

A short derivation is given in Appendix B. Holding all other parameters fixed, so that PbP_b is independent of α\alpha, the same result can be written as

Δα=−14∂Pγ→ϕ∂α,(21)\Delta\alpha=-\frac{1}{4}\frac{\partial P_{\gamma\to\phi}}{\partial\alpha}, \tag*{(21)}

where α\alpha is understood in radians. The rotation magnitude is maximal for

α−θg=45∘ (mod⁡90∘),∣Δα∣max⁡=Pb4.(22)\alpha-\theta_g=45^\circ\ \left(\operatorname{mod}90^\circ\right),\qquad|\Delta\alpha|_{\max}=\frac{P_b}{4}. \tag*{(22)}

For the head-on resonant benchmark of Table I, ∣Δα∣max⁡≃8.09×10−12 rad|\Delta\alpha|_{\max}\simeq8.09\times10^{-12}\,\mathrm{rad}. The corresponding angular dependence is shown in Figure 5.

Figure 5. Dichroic rotation for a head-on collision at mϕ=mres(180∘)m_\phi=m_{\mathrm{res}}(180^\circ). (a) Signed rotation Δα\Delta\alpha. The dashed branches at α−θg=45∘\alpha-\theta_g=45^\circ modulo 90∘90^\circ mark extrema of the rotation magnitude; adjacent branches alternate between negative and positive rotation. The dotted branches at α−θg=0∘\alpha-\theta_g=0^\circ modulo 90∘90^\circ indicate zero rotation. (b) Rotation magnitude ∣Δα∣|\Delta\alpha|, for which the dashed branches mark the maxima and the dotted branches mark the zeros. The remaining parameters are listed in Table I.

Figure 3 and Figure 5 show complementary manifestations of the same coupling-defined bright–dark structure. The dark direction α=θg\alpha=\theta_g and the orthogonal bright direction give, respectively, zero and maximal conversion in Figure 3, yet both are zero-rotation directions in Figure 5: a pure dark input is unchanged, whereas a pure bright input is attenuated without changing its polarization direction. Rotation requires both components and is therefore largest when their incident amplitudes have equal magnitude, α−θg=45∘\alpha-\theta_g=45^\circ modulo 90∘90^\circ. In panel (a), the sign of Δα\Delta\alpha distinguishes the two senses of rotation, while panel (b) shows only the corresponding magnitude.

Conclusions

We have studied leading-order photon-to-ALP conversion in a finite, linearly polarized laser pulse with simultaneous scalar-type and pseudoscalar-type photon couplings and a variable collision geometry.

Three main results emerge. First, the two interaction contributions enter the same transition amplitude and interfere coherently, leading to the factorized polarization dependence Pγ→ϕ=Pmax⁡sin⁡2(α−θg)P_{\gamma\to\phi}=P_{\max}\sin^2(\alpha-\theta_g). The coupling composition therefore determines two orthogonal probe polarizations corresponding to vanishing and maximal conversion, respectively. Second, the finite-pulse resonance is controlled by the collision geometry through mres(θ)=2ωω0sin⁡(θ/2)m_{\mathrm{res}}(\theta)=2\sqrt{\omega\omega_0}\sin(\theta/2). Varying the collision angle continuously shifts the resonantly enhanced ALP mass while leaving the coupling-selected polarization directions unchanged. The polarization maps and the mass–angle resonance structure therefore provide complementary representations of the same factorized conversion probability. Third, real on-shell ALP production induces dichroic polarization rotation through polarization-dependent depletion of the transmitted probe. In the weak-conversion regime, Δα=−(Pb/4)sin⁡[2(α−θg)]\Delta\alpha=-(P_b/4)\sin[2(\alpha-\theta_g)]. The rotation vanishes along both the zero-conversion and maximal-conversion directions and reaches its maximum magnitude when the two corresponding polarization components have equal incident amplitudes. At these angles, the conversion probability is half of its maximum. Conversion and polarization rotation thus provide complementary polarization-resolved signatures of the same coherent scalar–pseudoscalar interaction structure.

The present analysis isolates the absorptive effect associated with real ALP production in a pulsed plane-wave background with a monochromatic probe. The framework can be extended to include ALP-induced dispersive phases, QED vacuum birefringence, and more general strong-field polarization states.

Acknowledgments

We thank Orkash Amat and Mamat Ali Bake for helpful discussions. This work is supported by the National Natural Science Foundation of China (NSFC) under Grants No. 12375240 and No. 12535015.

Derivation of the photon-to-ALP conversion probability

This appendix derives the conversion probability in Eq. (13) using the normalization conventions of the main text. The scalar and pseudoscalar contributions are combined at the amplitude level, the finite-pulse spacetime integral supplies the spectral factor, and the ALP on-shell condition together with the final-state phase-space integration determines the kinematic and normalization factors.

At first order in the quantized probe field, the conversion amplitude is determined by the linearized invariants F(1)=B0⋅Bγ−E0⋅Eγ\mathcal{F}^{(1)} = \mathbf{B}_0 \cdot\mathbf{B}_\gamma- \mathbf{E}_0 \cdot\mathbf{E}_\gamma and G(1)=−(E0⋅Bγ+B0⋅Eγ)\mathcal{G}^{(1)} = -(\mathbf{E}_0 \cdot\mathbf{B}_\gamma+ \mathbf{B}_0 \cdot\mathbf{E}_\gamma). We use continuum-normalized one-particle states, ⟨p∣p′⟩=(2π)3δ(3)(p−p′)\langle p|p'\rangle= (2\pi)^3\delta^{(3)}(\mathbf{p}-\mathbf{p}'), with the same normalization convention for the incident photon. The required field matrix elements are

⟨0∣Eγ(x)∣γ(k,α)⟩=i2πω ϵαe−ik⋅x,\langle0|\mathbf{E}_\gamma(x)|\gamma(k,\alpha)\rangle= i\sqrt{2\pi\omega}\,\boldsymbol{\epsilon}_\alpha e^{-ik\cdot x},
⟨0∣Bγ(x)∣γ(k,α)⟩=i2πω bαe−ik⋅x,\langle0|\mathbf{B}_\gamma(x)|\gamma(k,\alpha)\rangle= i\sqrt{2\pi\omega}\,\mathbf{b}_\alpha e^{-ik\cdot x},
⟨ϕ(p)∣ϕ(x)∣0⟩=eip⋅x2ϵp,ϵp=mϕ2+p2.(23)\langle\phi(p)|\phi(x)|0\rangle= \frac{e^{ip\cdot x}}{\sqrt{2\epsilon_p}}, \qquad\epsilon_p = \sqrt{m_\phi^2+\mathbf{p}^2}. \tag*{(23)}

Contracting the probe fields with the background geometry of Eqs. (8) and (7) gives

⟨F(1)⟩=−i2πω E0(φ)(1−cos⁡θ)cos⁡α e−ik⋅x,\langle\mathcal{F}^{(1)}\rangle= -i\sqrt{2\pi\omega}\,\mathcal{E}_0(\varphi)(1-\cos\theta)\cos\alpha\,e^{-ik\cdot x},
⟨G(1)⟩=+i2πω E0(φ)(1−cos⁡θ)sin⁡α e−ik⋅x,(24)\langle\mathcal{G}^{(1)}\rangle= +i\sqrt{2\pi\omega}\,\mathcal{E}_0(\varphi)(1-\cos\theta)\sin\alpha\,e^{-ik\cdot x}, \tag*{(24)}

where ⟨F(1)⟩≡⟨0∣F(1)(x)∣γ(k,α)⟩\langle\mathcal{F}^{(1)}\rangle\equiv\langle0|\mathcal{F}^{(1)}(x)|\gamma(k,\alpha)\rangle, and analogously for G(1)\mathcal{G}^{(1)}. The relative sign causes the scalar and pseudoscalar contributions to combine coherently through Γα=gscos⁡α−gpsin⁡α\Gamma_\alpha= g_s\cos\alpha-g_p\sin\alpha, defined in Eq. (10). The leading-order SS-matrix element is therefore, up to an overall phase,

Sfi(1)=−E04ππωϵp(1−cos⁡θ)ΓαI(q),S_{fi}^{(1)} = -\frac{\mathcal{E}_0}{4\pi}\sqrt{\frac{\pi\omega}{\epsilon_p}}(1-\cos\theta)\Gamma_\alpha\mathcal{I}(q),
I(q)=∫d4x f(φ)cos⁡(φ+φCEP)eiq⋅x.(25)\mathcal{I}(q) = \int d^4x\,f(\varphi)\cos(\varphi+\varphi_{\mathrm{CEP}})e^{iq\cdot x}. \tag*{(25)}

Thus Γα\Gamma_\alpha contains the complete polarization dependence, whereas the pulse profile and kinematics enter through I(q)\mathcal{I}(q). Here q=p−kq=p-k is the four-momentum transfer associated with the photon-to-ALP transition, as illustrated in Figure 2.

To evaluate the pulse integral, we introduce the light-front variables x±=t±yx^\pm=t\pm y and q±=q0±qyq^\pm=q^0\pm q^y. Since φ=ω0x−\varphi=\omega_0x^-, the integrations over xx, zz, and x+x^+ enforce qx=qz=q−=0q_x=q_z=q^-=0, while the remaining x−x^- integration gives the pulse spectrum defined in Eq. (11):

I(q)=(2π)3δ(qx)δ(qz)δ(q−)H(ρ)2ω0,ρ=q+2ω0.(26)\mathcal{I}(q)=(2\pi)^3\delta(q_x)\delta(q_z)\delta(q^-)\frac{H(\rho)}{2\omega_0}, \qquad\rho=\frac{q^+}{2\omega_0}. \tag*{(26)}

The three conservation conditions imply pμ=kμ+ρk0μp^\mu=k^\mu+\rho k_0^\mu.

Imposing p2=mϕ2p^2=m_\phi^2 then gives

mϕ2=2ρ k⋅k0,ρ=mϕ24ωω0sin⁡2(θ/2),(27)m_\phi^2=2\rho\,k\cdot k_0, \qquad\rho=\frac{m_\phi^2}{4\omega\omega_0\sin^2(\theta/2)}, \tag*{(27)}

which is Eq. (12). Hence ρ\rho fixes the kinematic momentum transfer, while H(ρ)H(\rho) supplies the corresponding finite-pulse spectral weight.

With continuum-normalized states, the conversion probability follows from the squared transition amplitude, integrated over the final ALP phase space and divided by the norm of the incident plane-wave state. To make the normalization of the squared conservation distributions explicit, we temporarily regulate the xx, zz, and x+x^+ integrations over finite intervals of lengths LxL_x, LzL_z, and L+L_+. Defining

D(q)=(2π)3δ(qx)δ(qz)δ(q−),(28)\mathcal{D}(q)=(2\pi)^3\delta(q_x)\delta(q_z)\delta(q^-), \tag*{(28)}

the squared delta functions are understood as

[(2π)δ(qx)]2→Lx(2π)δ(qx),[(2\pi)\delta(q_x)]^2\rightarrow L_x(2\pi)\delta(q_x),
[(2π)δ(qz)]2→Lz(2π)δ(qz),[(2\pi)\delta(q_z)]^2\rightarrow L_z(2\pi)\delta(q_z),
[(2π)δ(q−)]2→L+2(2π)δ(q−).(29)[(2\pi)\delta(q^-)]^2\rightarrow\frac{L_+}{2}(2\pi)\delta(q^-). \tag*{(29)}

The factor 1/21/2 in the last relation arises because q−q^- is Fourier conjugate to x+/2x^+/2. At fixed time, the normalization volume of the incident state is V=LxLzV=L_xL_z, so the regulator-dependent volume factors cancel against the norm of the incoming plane-wave state.

The transverse delta functions fix px=kxp_x=k_x and pz=kzp_z=k_z. For the remaining longitudinal integration, p−=p0−pyp^-=p^0-p^y and k−=ω(1−cos⁡θ)k^-= \omega(1-\cos\theta), so the constraint p−=k−p^-=k^- selects a single root py∗p_y^*. Since d(p−−k−)/dpy∣py∗=k−/ϵp\left.d(p^--k^-)/dp_y\right|_{p_y^*}=k^-/\epsilon_p,

δ(p−−k−)=ϵpk−δ(py−py∗),\delta(p^--k^-)=\frac{\epsilon_p}{k^-}\delta(p_y-p_y^*),
1V∫d3p(2π)3∣D(q)∣2⟶ϵp2k−.(30)\frac{1}{V}\int\frac{d^3p}{(2\pi)^3}|\mathcal{D}(q)|^2\longrightarrow\frac{\epsilon_p}{2k^-}. \tag*{(30)}

Thus all regulator-dependent volume factors cancel, leaving the finite longitudinal Jacobian together with the factor 1/21/2 associated with the light-front normalization.

Combining the SS-matrix element in Eq. (25) with the pulse integral in Eq. (26) and carrying out the final-state phase-space integration using Eq. (30), with k−=ω(1−cos⁡θ)k^-=\omega(1-\cos\theta), gives

Pγ→ϕ=Iamp16ω02sin⁡2θ2∣Γα∣2∣H(ρ)∣2,Iamp=E024π.(31)P_{\gamma\to\phi}=\frac{I_{\mathrm{amp}}}{16\omega_0^2}\sin^2\frac{\theta}{2}|\Gamma_\alpha|^2|H(\rho)|^2, \qquad I_{\mathrm{amp}}=\frac{E_0^2}{4\pi}. \tag*{(31)}

For real couplings,

∣Γα∣2=gs2cos⁡2α+gp2sin⁡2α−gsgpsin⁡(2α)=g2sin⁡2(α−θg).(32)\begin{aligned} |\Gamma_\alpha|^2=g_s^2\cos^2\alpha+g_p^2\sin^2\alpha-g_sg_p\sin(2\alpha) \\ &=g^2\sin^2(\alpha-\theta_g). \tag*{(32)} \end{aligned}

The first form displays the scalar–pseudoscalar interference explicitly, while the second follows from Eq. (1).

Equations (A9) and (A10) therefore yield the factorized probability given in Eq. (13), with Pmax⁡P_{\max} defined in Eq. (14).

For a head-on collision and a pure scalar or pseudoscalar coupling, Eq. (31) agrees with the corresponding linearly polarized finite-pulse conversion probability in Ref. [34], under the identification Iamp=I0I_{\mathrm{amp}} = I_0 and the corresponding polarization choice.

Derivation of the dichroic polarization rotation

Let δ≡α−θg\delta\equiv\alpha-\theta_g. In the bright–dark basis of Eq. (17), the incident polarization and the polarization of the transmitted probe are

ϵin=−sin⁡δ e^b+cos⁡δ e^d,\boldsymbol{\epsilon}_{\mathrm{in}}=-\sin\delta\,\hat{\mathbf e}_b+\cos\delta\,\hat{\mathbf e}_d,
ϵout∝−1−Pbsin⁡δ e^b+cos⁡δ e^d.(33)\boldsymbol{\epsilon}_{\mathrm{out}}\propto-\sqrt{1-P_b}\sin\delta\,\hat{\mathbf e}_b+\cos\delta\,\hat{\mathbf e}_d. \tag*{(33)}

Only the bright component is attenuated because only this component converts into a real ALP at this order. Here PbP_b is the conversion probability for a purely bright input; using the angle-dependent Pγ→ϕ(α)P_{\gamma\to\phi}(\alpha) in the attenuation factor would count the bright projection twice.

Writing δout=αout−θg\delta_{\mathrm{out}}=\alpha_{\mathrm{out}}-\theta_g and taking the ratio of the bright and dark components gives

tan⁡δout=1−Pbtan⁡δ,Δα=δout−δ,(34)\tan\delta_{\mathrm{out}}=\sqrt{1-P_b}\tan\delta,\qquad\Delta\alpha=\delta_{\mathrm{out}}-\delta, \tag*{(34)}

where the branch of δout\delta_{\mathrm{out}} is chosen continuously such that δout→δ\delta_{\mathrm{out}}\to\delta as Pb→0P_b\to0.

For Pb≪1P_b\ll1, 1−Pb≃1−Pb/2\sqrt{1-P_b}\simeq1-P_b/2. Expanding the tangent to first order gives

tan⁡(δ+Δα)≃tan⁡δ+Δαsec⁡2δ,1−Pbtan⁡δ≃tan⁡δ−Pb2tan⁡δ.(35)\begin{aligned} \tan(\delta+\Delta\alpha)&\simeq\tan\delta+\Delta\alpha\sec^2\delta,\\ \sqrt{1-P_b}\tan\delta&\simeq\tan\delta-\frac{P_b}{2}\tan\delta. \tag*{(35)} \end{aligned}

Equating the two sides of Eq. (34) yields

Δα=−Pb2sin⁡δcos⁡δ=−Pb4sin⁡[2(α−θg)].(36)\Delta\alpha=-\frac{P_b}{2}\sin\delta\cos\delta=-\frac{P_b}{4}\sin[2(\alpha-\theta_g)]. \tag*{(36)}

The factor 1/41/4 arises from two factors of 1/21/2: the probability loss PbP_b reduces the bright field amplitude by Pb/2P_b/2, while sin⁡δcos⁡δ=sin⁡(2δ)/2\sin\delta\cos\delta=\sin(2\delta)/2.

Finally, holding the nonpolarization parameters fixed so that PbP_b is independent of α\alpha, differentiation of the conversion probability gives

∂Pγ→ϕ∂α=Pbsin⁡[2(α−θg)].(37)\frac{\partial P_{\gamma\to\phi}}{\partial\alpha}=P_b\sin[2(\alpha-\theta_g)]. \tag*{(37)}

The dichroic rotation is therefore related directly to the polarization-angle dependence of the conversion probability:

Δα=−14∂Pγ→ϕ∂α.(38)\Delta\alpha=-\frac{1}{4}\frac{\partial P_{\gamma\to\phi}}{\partial\alpha}. \tag*{(38)}

Here α\alpha is understood in radians when taking the derivative. The bright and dark directions have zero rotation, whereas the rotation magnitude is maximal for α−θg=45∘\alpha-\theta_g=45^\circ modulo 90∘90^\circ. At these angles, Pγ→ϕ=Pb/2P_{\gamma\to\phi}=P_b/2, so maximal rotation occurs when the incident bright and dark amplitudes have equal magnitude and the conversion probability is one half of its bright-mode maximum.

References

  1. [1]R. D. Peccei and H. R. Quinn, Phys. Rev. Lett. 38, 1440 (1977).
  2. [2]S. Weinberg, Phys. Rev. Lett. 40, 223 (1978).
  3. [3]F. Wilczek, Phys. Rev. Lett. 40, 279 (1978).
  4. [4]G. Grilli di Cortona, E. Hardy, J. Pardo Vega, and G. Villadoro, J. High Energy Phys. 01, 034.
  5. [5]L. Di Luzio, M. Giannotti, E. Nardi, and L. Visinelli, Phys. Rep. 870, 1 (2020).
  6. [6]P. Sikivie, Phys. Rev. Lett. 51, 1415 (1983).
  7. [7]G. Raffelt and L. Stodolsky, Phys. Rev. D 37, 1237 (1988).
  8. [8]L. D. Duffy and K. van Bibber, New J. Phys. 11, 105008 (2009).
  9. [9]D. J. E. Marsh, Phys. Rep. 643, 1 (2016).
  10. [10]M. Baryakhtar, L. Rosenberg, and G. Rybka, Rep. Prog. Phys. 88, 106901 (2025).
  11. [11]J. Jaeckel and A. Ringwald, Annu. Rev. Nucl. Part. Sci. 60, 405 (2010).
  12. [12]I. G. Irastorza and J. Redondo, Prog. Part. Nucl. Phys. 102, 89 (2018).
  13. [13]K. Choi, S. H. Im, and C. S. Shin, Annu. Rev. Nucl. Part. Sci. 71, 225 (2021).
  14. [14]M. Bauer, M. Neubert, and A. Thamm, J. High Energy Phys. 12, 044.
  15. [15]I. Brivio, M. B. Gavela, L. Merlo, K. Mimasu, J. M. No, R. del Rey, and V. Sanz, Eur. Phys. J. C 77, 572 (2017).
  16. [16]A. Payez, C. Evoli, T. Fischer, M. Giannotti, A. Mirizzi, and A. Ringwald, J. Cosmol. Astropart. Phys. 02, 006.
  17. [17]D. Fordham and I. Lopes, Phys. Rev. D 109, 123007 (2024).
  18. [18]H. Abe et al. (MAGIC Collaboration), Phys. Dark Universe 44, 101425 (2024).
  19. [19]D. Zhang, E. G. M. Ferreira, I. Obata, and T. Namikawa, Phys. Rev. D 110, 103525 (2024).
  20. [20]T. Namikawa, K. Murai, and F. Naokawa, Phys. Rev. D 112, 123513 (2025).
  21. [21]S. Nayas et al. (Particle Data Group), Phys. Rev. D 110, 030001 (2024).
  22. [22]V. Anastassopoulos et al. (CAST Collaboration), Nat. Phys. 13, 584 (2017).
  23. [23]T. Braine et al. (ADMX Collaboration), Phys. Rev. Lett. 124, 101303 (2020).
  24. [24]Y. Kim et al., Phys. Rev. Lett. 133, 051802 (2024).
  25. [25]J. Heinze, A. Gill, A. Dmitriev, J. Smetana, T. Yan, V. Boyer, D. Martynov, and M. Evans, Phys. Rev. Lett. 132, 191002 (2024).
  26. [26]D. Gavilan-Martin et al., Nat. Commun. 16, 4953 (2025).
  27. [27]Y. Liao, Phys. Lett. B 650, 257 (2007).
  28. [28]H. Tam and Q. Yang, Phys. Lett. B 716, 435 (2012).
  29. [29]R. Cameron, G. Cantatore, A. C. Melissinos, G. Ruoso, Y. Semertzidis, H. J. Halama, D. M. Lazarus, A. G. Prodell, F. Nezrick, C. Rizzo, and E. Zavattini, Phys. Rev. D 47, 3707 (1993).
  30. [30]S.-J. Chen, H.-H. Mei, and W.-T. Ni, Mod. Phys. Lett. A 22, 2815 (2007).
  31. [31]E. Zavattini, G. Zavattini, G. Ruoso, G. Raiteri, E. Polacco, E. Milotti, V. Lozza, M. Karuza, U. Gastaldi, G. Di Domenico, F. Della Valle, R. Cimino, S. Carusotto, G. Cantatore, and M. Bregant, Phys. Rev. D 77, 032006 (2008).
  32. [32]F. Della Valle, E. Milotti, A. Ejlli, U. Gastaldi, G. Messineo, G. Zavattini, R. Pengo, and G. Ruoso, Eur. Phys. J. C 76, 24 (2016).
  33. [33]B. Döbrich and H. Gies, J. High Energy Phys. 10, 022.
  34. [34]S. Villalba-Chávez and A. Di Piazza, J. High Energy Phys. 11, 136.
  35. [35]S. Villalba-Chávez, Nucl. Phys. B 881, 391 (2014).
  36. [36]S. Villalba-Chávez, T. Podszus, and C. Müller, Phys. Lett. B 769, 233 (2017).
  37. [37]S. Bolognesi et al., Phys. Rev. D 86, 095031 (2012).
  38. [38]J.-N. Ding, Y. Liu, and M. Song, Probing the CP property of ALP-photon interactions at future lepton colliders (2026), arXiv:2603.08144.arxiv.org/abs/2603.08144
  39. [39]Q.-H. Chang and S. Zhao, CP polarimetry with linearly polarized photon fusion and double-tagged protons (2026), arXiv:2608.05034.arxiv.org/abs/2608.05034
  40. [40]B. M. Dillon and B. King, Eur. Phys. J. C 78, 775 (2018).
  41. [41]C. A. Ur, D. Balabanski, M. Cernăianu, et al., Eur. Phys. J. A 61, 248 (2025).
  42. [42]E. Khazanov, A. Shaykin, I. Kostyukov, et al., High Power Laser Sci. Eng. 11, e78 (2023).
  43. [43]K. Altenmüller et al. (CAST Collaboration), Phys. Rev. Lett. 133, 221005 (2024).
  44. [44]M. Arik et al. (CAST Collaboration), Phys. Rev. Lett. 112, 091302 (2014).
  45. [45]L. Maiani, R. Petronzio, and E. Zavattini, Phys. Lett. B 175, 359 (1986).

Paper details

vlnc:W_7g536uxp
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 1

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents