WorksPhysics and Astronomy
VBr >10 kV E-Beam/Sputtered Vertical NiOx/(011) β-Ga2O3 HJDs with PFOM >2.3 GW/cm2
Abstract
Beta-gallium oxide (β-Ga2O3) holds enormous potential for medium voltage range power electronic applications. This work reports VBr > 10 kV/Ron,sp = 43 mΩ*cm2 class edge terminated vertical heterojunction diodes (HJDs) with e-beam/sputtered nickel oxide (NiOx) stack on epitaxial (011) β-Ga2O3. The power figure of merit (PFOM) of the HJD exceeds 2.3 GW/cm2. The extracted parallel plane breakdown field is > 5.3 MV/cm, which is the highest reported electric field for thick (011) β-Ga2O3 epitaxial drift layer.
Introduction
The rapid expansion of data centers for artificial intelligence (AI) and charging networks for electric vehicles (EVs) have stimulated the necessity for efficient, cost-effective grid-level transmission and power conversion circuits at medium voltage level (1-35 kV).[1] Solid states transformers (SSTs) are critical for data centers in enabling efficient, high power density distribution by replacing conventional magnetic transformers with power semiconductor-based converters. Enormous market potential is available in direct-to-rack power conversion for AI data centers that facilitate large voltage (13.5-35 kV, AC) to 800 V DC to reduce immediate power conversion steps, improving efficiencies for AI graphics processing units (GPUs) and accelerators. The high critical electric field strength (6-8 MV/cm) and availability of the shallow hydrogenic dopants[2] in epitaxial β-GaO[3], [4], [5], [6] can be leveraged to demonstrate power devices with much lower differential specific on-resistance while operating at a higher blocking voltage[7], [8], [9] compared to silicon carbide (SiC) and gallium nitride (GaN)[10], [11].
Although reliable p-type doping is currently not available in β-GaO, heterojunctions formed with p-NiO are able to realize multi-kV class[12] junctions along with breakdown electric field anisotropy across various orientations.[13], [14]
In this work, we demonstrated a kV NiO-based (e-beam/sputtered stack) vertical HJD with 43 mΩ•cm and PFOM value GW/cm on (011) homoepitaxial β-GaO with high electric field handling capability. [14] The parallel-plane breakdown electric field is extracted to be MV/cm.
Device Design and Fabrication
The NiO/(011) HVPE β-GaO HJD fabrication begins with a backside Ti/Au (50/350 nm) Ohmic metallization on n β-GaO bulk substrate using e-beam evaporation followed by a 60-seconds rapid thermal annealing (RTA) at 470 °C in N. An 8 nm of e-beam-evaporated NiO is deposited on (011) HVPE β-GaO drift region (Novel Crystal Technology (NCT), ~20 μm, cm) with a pre-patterned photoresist liftoff mask by optical lithography to circumvent the ion channeling effect in the (011) crystal orientation[15]. Following the first layer NiO deposition, a self-aligned p NiO (~20 nm) and p NiO (~20 nm) contact layer are reactively sputtered. Then, a Ni/Au/Ni (50/100/150 nm) anode cap/metal hard mask stack is deposited via e-beam evaporation. The fabricated HJDs are later dry-etched ~2 μm deep into the β-GaO drift region below the heterojunction interface using a BCl inductively coupled plasma (ICP) process at 200 W to accomplish mesa isolation with rounded corners for edge termination[16], [17], mitigating electric field crowding at device edges. A ~1.5 μm-thick SiO field plate oxide is sputtered conformally on the mesa-isolated (MI) HJDs, then a Ni/Au (50/300 nm) field plate (FP) metal stack with a 20-μm edge extension (L) is deposited on the oxide via e-beam evaporation to conclude the device fabrication. Cross-sectional device schematics is shown in Figure 1(a) for Schottky barrier diode (SBD) reference and Figure 1(b) for MI/FP HJDs.
Figure 1. Schematics cross-section of (a) reference Schottky barrier diodes (SBDs) and (b) mesa-isolated/field-plated heterojunction diodes (MI/FP HJDs).
Device Characterization
The electrical characteristics of the device are measured on Keithley 4200 Parameter Analyzer. The forward linear current-voltage (J-V) characteristics of the MI/FP HJDs are shown in Figure 2. (a) on circular diodes with device dimensions from 60-m dia. to 1-mm dia. along with those of SBD counterparts. The MI/FP HJDs exhibit on-state current density at 60-80 A/cm at 5 V with a turn-on voltage at 2.2 V across different device sizes. The SBDs show forward current density 80-90 A/cm at the same forward bias. Semi-log scale J-V characteristics of MI/FP HJDs in Figure 2. (b) reveal the reverse leakage current density at - A/cm under -5 V reverse voltage with a rectifying ratio at - across various diode dimensions. Figure 2. (c) shows that the HJDs’ differential specific on-resistances (R) with various device areas match consistently with each other at 38-43 mcm if considering a non-current spreading model, whereas they differ significantly if a 45°-angle current spreading[17] model is considered. Therefore, the non-current spreading model is adopted for all devices J-V characteristics normalization. The pulsed I-V characteristics with <1% duty cycle in Figure 2. (d) of the MI/FP HJD on 1-mm dia. device accomplishes > 1.5 A absolute current at 9 V on low-doped and thick HVPE grown (011) -GaO. The current value of the HJD closely matches that of the SBD counterpart with same device dimension, indicating that the e-beam/sputtered MI/FP HJD fully exploits the on-state potential of the epitaxial drift region.
Figure 2. (a) Linear forward J-V characteristics of SBDs and MI/FP HJDs. (b) Semi-log scale J-V characteristics of SBDs and MI/FP HJDs. (c) R vs. diode dimensions for SBDs and MI/FP HJDs. (d) Pulsed I-V characteristics for SBD and MI/FP 1-mm dia. devices.
Beyond J-V characterization, the capacitance-voltage (C-V) characteristics of the MI/FP HJD are shown in Figure 3. (a) on 1-mm dia. area at 1MHz. The inset of Figure 3. (a) linearly extracts the built-in (V) potential of the HJD at 2.2 V via 1/C vs. voltage characteristics consistent with the diode’s turn-on voltage.
Figure 3. (a) C-V characteristics of MI/FP HJD on 1-mm dia. dimeison at 1 MHz with 1/C vs. voltage inset. (b) Doping vs. depth profile MI/FP HJD on 1-mm dia. dimeison at 1 MHz.
The average apparent charge density of the (011) HVPE -GaO is extracted to be cm up to 11-12 m, as shown in Figure 3. (b), by using the relative permittivity value () 10.79[14] for (011) -GaO.
The breakdown characteristics of the MI/FP HJDs are measured with a B1505A Semiconductor Parameter Analyzer. The 60-m dia. HJDs showcases the highest breakdown voltage >10 kV and a lower bound catastrophic breakdown voltage at ~6 kV, as shown in Figure 4.(a).
Figure 4. (a) Reverse breakdown characteristics of MI/FP HJDs for 60-m dia. devices. (b) Reverse breakdown characteristics of MI/FP HJDs for 100-m dia. devices. (c) J-V characteristics of 60-m dia. device before and after 10 kV reverse bias in both linear and semi-log scale.
Additional MI/FP HJDs with 100-m dia. device dimensions breaks down at 6.5-7.34 kV, as shown in Figure 4.(b). The 60-m dia. device which survived from the 10 kV reverse bias measurement is taken again to compare its J-V characteristics to that obtained before 10 kV sweep. The surviving device still exhibits rectifying behavior in semi-log scale with similar on-state current density at 60-70 at 5 V forward voltage compared to its original J-V characteristics before experiencing 10 kV reverse bias, as shown in Figure 4.(c). The slight rise of the reverse leakage current density and non-ideal turn-on behavior after 10 kV sweep can be possibly attributed to leakage and charge trapping in the field plate oxide.
Figure 5 benchmarks the vs. breakdown voltage () of heterojunction diodes fabricated in this work in comparison to various HJDs reported in the literatures. It is shown that the PFOM of the MI/FP HJDs begins exceeding the material limit of 4H-SiC at 10 kV reverse bias.
Figure 5. Benchmarking of vs. breakdown voltage for various heterojunction diodes reported in the literature. [12], [16], [17], [19], [20], [21], [22], [23], [24], [25]
Summary
This work demonstrates kV class / HVPE -GaO heterojunction diodes by combining e-beam and sputtered as the p-type layers. The field-plated HJD with mesa-isolation accomplishes a PFOM value GW/cm and a parallel-plane breakdown electric field MV/cm. The high breakdown voltage/electric field accomplished on -GaO along with large PFOM value suggests this substrate orientation possesses potential for high electric field handling capability.
Acknowledgement
The author would like to acknowledge the funding from U.S. Department of Energy (DOE) ARPA-E ULTRAFAST program (DE-AR0001824) and Coherent/II-VI Foundation Block Gift Program. Research at NRL was partially supported by the Office of Naval Research.
References
- [1]J.-H. Hsia, Z. Zhu, Y. Liu, J. Niroula, M. Oh, J. A. Perozek, J. Park, S. Krishnamoorthy, T. Palacios., “High Responsivity Optically-Triggered Vertical GaN Heterojunction Power Switches With kHz Operation,” IEEE Electron Device Lett., vol. 47, no. 3, pp. 498–501, Mar. 2026, doi: 10.1109/led.2026.3651209.DOI
- [2]A. T. Neal, S. Mou, S. Rafique, H. Zhao, E. Ahmadi, J. S. Speck, K. T. Stevens, J. D. Blevins, D. B. Thomson, N. Moser, K. D. Chabak, G. H. Jessen, “Donors and deep acceptors in β-Ga₂O₃,” Applied Physics Letters, vol. 113, no. 6, Aug. 2018, doi: 10.1063/1.5034474.DOI
- [3]A. Bhattacharyya, C. Peterson, K. Chanchaiworawit, S. Roy, Y. Liu, S. Rebollo, S. Krishnamoorthy, “Over 6 μm thick MOCVD-grown low-background carrier density (10¹⁵ cm⁻³) high-mobility (010) β-Ga₂O₃ drift layers,” Applied Physics Letters, vol. 124, no. 1, Jan. 2024, doi: 10.1063/5.0188773.DOI
- [4]C. Peterson, A. Bhattacharyya, K. Chanchaiworawit, R. Kahler, S. Roy, Y. Liu, S. Rebollo, A. Kallistova, T. E. Mates, S. Krishnamoorthy., “200 cm²/Vs electron mobility and controlled low 10¹⁵ cm⁻³ Si doping in (010) β-Ga₂O₃ epitaxial drift layers,” Applied Physics Letters, vol. 125, no. 18, Oct. 2024, doi: 10.1063/5.0230413.DOI
- [5]S. Rebollo, Y. Liu, C. Peterson, S. Krishnamoorthy, and J. S. Speck, “Growth of nitrogen-doped (010) β-Ga₂O₃ by plasma-assisted molecular beam epitaxy using an O₂/N₂ gas mixture,” Applied Physics Letters, vol. 126, no. 8, Feb. 2025, doi: 10.1063/5.0250037.DOI
- [6]C. Peterson, C. N. Saha, R. Kahler, Y. Liu, A. Mattapalli, S. Roy, S. Krishnamoorthy, “Kilovolt-class β-Ga₂O₃ field-plated Schottky barrier diodes with MOCVD-grown intentionally 10¹⁵ cm⁻³ doped drift layers,” Journal of Applied Physics, vol. 138, no. 18, Nov. 2025, doi: 10.1063/5.0302735.DOI
- [7]S. Roy, B. Kostroun, Y. Liu, J. Cooke, A. Bhattacharyya, C. Peterson, B. S. Rodriguez, S. Krishnamoorthy, “Low QcVF 20 A/1.4 kV β-Ga₂O₃ Vertical Trench High-k RESURF Schottky Barrier Diode With Turn-On Voltage of 0.5 V,” IEEE Electron Device Lett., vol. 45, no. 12, pp. 2487–2490, Sep. 2024, doi: 10.1109/led.2024.3469283.DOI
- [8]S. Roy, B. Kostroun, J. Cooke, Y. Liu, A. Bhattacharyya, C. Peterson, B. S. Rodriguez, S. Krishnamoorthy, “Ultra-low reverse leakage in large area kilo-volt class β-Ga₂O₃ trench Schottky barrier diode with high-k dielectric RESURF,” Applied Physics Letters, vol. 123, no. 24, Dec. 2023, doi: 10.1063/5.0175674.DOI
- [9]C. N. Saha, S. Roy, Y. Liu, C. Peterson, and S. Krishnamoorthy, “2.34 kV β-Ga₂O₃ vertical trench RESURF Schottky barrier diode with sub-micron fin width,” APL Electronic Devices, vol. 1, no. 4, Dec. 2025, doi: 10.1063/5.0299732.DOI
- [10]Y. Zhang and J. S. Speck, “Importance of shallow hydrogenic dopants and material purity of ultra-wide bandgap semiconductors for vertical power electron devices,” Semicond. Sci. Technol., vol. 35, no. 12, p. 125018, Oct. 2020, doi: 10.1088/1361-6641/abbba6.DOI
- [11]B. J. Baliga, Fundamentals of power semiconductor devices. Springer Science & Business Media, 2010.
- [12]J.-S. Li, H. H. Wan, C. C. Chiang, T. J. Yoo, M. H. Yu, F. Ren, H. Kim, Y. T Liao and S. J. Pearton, “Breakdown up to 13.5 kV in NiO/β-Ga₂O₃ Vertical Heterojunction Rectifiers,” ECS J. Solid State Sci. Technol., vol. 13, no. 3, p. 035003, Mar. 2024, doi: 10.1149/2162-8777/ad3457.DOI
- [13]Y. Liu, S. M. W. Witsell, J. F. Conley Jr., and S. Krishnamoorthy, “Orientation-dependent β-Ga₂O₃ heterojunction diode with atomic layer deposition (ALD) NiO,” Applied Physics Letters, vol. 127, no. 12, Sep. 2025, doi: 10.1063/5.0285622.DOI
- [14]Y. Liu, H. Wang, C. Peterson, J. S. Speck, C. V. D. Walle, and S. Krishnamoorthy, “Cr₂O₃/β-Ga₂O₃ Heterojunction Diodes with Orientation-Dependent Breakdown Electric Field up to 12.9 MV/cm,” ArXiv Nov. 25, 2025, ArXiv:2511.20885. doi: 10.48550/arXiv.2511.20885.DOI
- [15]C. C. Peterson, C. N. Saha, Y. Liu, J. S. Speck, and S. Krishnamoorthy, “Evidence of Micron-Scale Ion Damage in (010), (110), and (011) β-Ga₂O₃ Epitaxial Layers,” Apr. 27, 2026, ArXiv: arXiv:2604.24190. doi: 10.48550/arXiv.2604.24190.DOI
- [16]J. Wan, H. Wang, C. Zhang, Y. Li, C. Wang, H. Cheng, J. Li, N. Ren, Q. Guo, K. Sheng “3.3 kV-class NiO/β-Ga₂O₃ heterojunction diode and its off-state leakage mechanism,” Applied Physics Letters, vol. 124, no. 24, Jun. 2024, doi: 10.1063/5.0211183.DOI
- [17]Y. Liu, S. Roy, C. Peterson, A. Bhattacharyya, and S. Krishnamoorthy, “Ultra-low reverse leakage NiOx/β-Ga₂O₃ heterojunction diode achieving breakdown voltage >3 kV with plasma etch field-termination,” AIP Advances, vol. 15, no. 1, Jan. 2025, doi: 10.1063/5.0251069.DOI
- [19]M. Xiao, B. Wang, J. Spencer, Y. Qin, M. Porter, Y. Ma, Y. Wang, K. Sasaki, M. Tadjer, Y. Zhang, “NiO junction termination extension for high-voltage (> 3 kV) Ga₂O₃ devices,” Applied Physics Letters, vol. 122, no. 18, May 2023, doi: 10.1063/5.0142229.DOI
- [20]X. Lu, X. Zhou, H. Jiang, K. W. Ng, Z. Chen, Y. Pei, K. M. Lau, G. Wang “1-kV Sputtered p-NiO/n-Ga₂O₃ Heterojunction Diodes With an Ultra-Low Leakage Current Below 1 μA/cm²,” IEEE Electron Device Lett., vol. 41, no. 3, pp. 449–452, Mar. 2020, doi: 10.1109/led.2020.2967418.DOI
- [21]H. H. Gong, X. H. Chen, Y. Xu, F.-F. Ren, S. L. Gu, and J. D. Ye, “A 1.86-kV double-layered NiO/β-Ga₂O₃ vertical p–n heterojunction diode,” Applied Physics Letters, vol. 117, no. 2, Jul. 2020, doi: 10.1063/5.0010052.DOI
- [22]F. Zhou, F. Zhou, H. Gong, W. Xu, X. Yu, Y. Xu, Y. Yang, F. Ren, S. Gu, Y. Zheng, R. Zhang, J. Ye, H. Lu., “1.95-kV Beveled-Mesa NiO/β-Ga₂O₃ Heterojunction Diode With 98.5% Conversion Efficiency and Over Million-Times Overvoltage Ruggedness,” IEEE Trans. Power Electron., vol. 37, no. 2, pp. 1223–1227, Feb. 2022, doi: 10.1109/tpel.2021.3108780.DOI
- [23]Y. Wang, Y. Wang, H. Gong, Y. Lv, X. Fu, S. Dun, T. Han, H. Liu, X. Zhou, S. Liang, J. Ye, R. Zhang, A. Bu, S. Cai, Z. Feng, “2.41 kV Vertical P-NiO/n-Ga₂O₃ Heterojunction Diodes With a Record Baliga’s Figure-of-Merit of 5.18 GW/cm²,” IEEE Trans. Power Electron., vol. 37, no. 4, pp. 3743–3746, Apr. 2022, doi: 10.1109/tpel.2021.3123940.DOI
- [24]J.-S. Li, C.-C. Chiang, X. Xia, H.-H. Wan, F. Ren, and S. J. Pearton, “7.5 kV, 6.2 GW cm⁻² NiO/β-Ga₂O₃ vertical rectifiers with on–off ratio greater than 10¹³,” Journal of Vacuum Science & Technology A, vol. 41, no. 3, Apr. 2023, doi: 10.1116/6.0002580.DOI
- [25]J.-S. Li, H. H. Wan, C. C. Chiang, T. J. Yoo, F. Ren, H. Kim, S. J. Pearton, “NiO/Ga₂O₃ Vertical Rectifiers of 7 kV and 1 mm² with 5.5 A Forward Conduction Current,” Crystals, vol. 13, no. 12, p. 1624, Nov. 2023, doi: 10.3390/cryst13121624.DOI