WorksPhysics and Astronomy
Scattering features of a self-dual spectral singularity in coupled ring resonators with balanced gain and loss
Abstract
We theoretically and numerically discuss the general scattering property of a coupled two-ring-resonators externally coupled to a straight bus waveguide. Specifically, we require one ring resonator to be light field amplifying and another to be that dissipative, where the associated attenuation and gain factors for a field amplitude after one-round trip are formed in a reciprocal pair as well as the effective wave propagation constants are same. Obtained from reciprocity and an effective PT-symmetric transfer matrix, we exploit parametrization to propose a general phase diagram, identifying overall scattering outcomes. Especially, we find that the formation of a self-dual spectral singularity, namely coherent perfect absorption-lasing (CPAL), is occurred at a certain relation of a coupling coefficient and an attenuation factor as well as resonant whispering gallery modes. Reducing light amplification and dissipation strengths in each rings narrows the spectral bandwidth associated with CPAL. We further discover that any system with the CPAL parameters would exhibit a same scattering feature: transmission extinction, CPAL, and uni-directional reflectionless at the loss ring side, with respect to an incident wavelength. Additionally, a transmission extinction can be away from the resonance. These analytical predictions are verified by electromagnetic simulations.
Introduction
Optical ring resonators are key components for on-chip photonic integrated circuits, with diverse applications across science and engineering, including optical memory [1], sensing [2, 3], quantum controlled-NOT gates [4], optical squeezing [5], and wavelength division multiplexing [6] to name a few examples.
A ring resonator externally coupled to a straight bus waveguide exhibits the critical coupling at a whispering-gallery resonance when an intrinsic loss balances an external coupling, as demonstrated experimentally [7]. Destructive interference between a directly transmitted wave and a circulating wave in a ring externally coupling to a bus waveguide results in a transmission extinction. This scattering event with an absence of both reflection and transmission uniquely represents a single-sided coherent perfect absorption, corresponding to a zero eigenvalue of the scattering matrix [8]. In a two-port slab system, coherent perfect absorption generally requires two counterpropagating incident waves with a prescribed relative phase and amplitude ratio [9, 10].
Optical gain in ring resonators can be provided by electrically pumped quantum dots [11] or multiple quantum wells [12], optically pumped rare-earth ions [13], or nonlinear processes such as stimulated Raman scattering [14] and Kerr four-wave-mixing-based parametric amplification [15]. Moreover, a lasing threshold in a single active ring system is reached when an amplification factor for a field amplitude after one round-trip equals a reciprocal of a through coupling coefficient at resonance, corresponding to a pole eigenvalue of the associated scattering matrix. Electrically pumped microring lasing has been experimentally demonstrated on a hybrid III–V/silicon platform [12].
At discrete real frequencies, spectral singularities correspond to lasing thresholds, whereas their time-reversed counterparts correspond to coherent perfect absorption [16]. When both occur at the same frequency, the system supports coherent perfect absorption and lasing (CPAL), associated with a self-dual spectral singularity [17]. These scattering results belong to non-Hermitian, where relies on material gain and loss embedded. In particularly, one well-known example with a refractive-index distribution satisfying signs a parity–time () symmetry, with an even real part and an odd imaginary part corresponding to spatially balanced gain and loss [18, 19]. A single microring resonator with a suitably designed -symmetric grating that is externally coupled to a bus waveguide can support simultaneous coherent perfect absorption and lasing (CPAL) at discrete frequencies [20]. At each CPAL point, a scattering-matrix zero and pole coincide at the same real frequency, forming a self-dual spectral singularity. Related studies have demonstrated that due to an unbalanced coupling strength between clockwise and counterclockwise modes of the ring, that suppresses circulation in one direction while enhancing it in the other [21]. In a coupled two ring system, at the symmetry broken phase, it can localize a supermode predominantly in the gain ring, enabling lasing when its net gain exceeds threshold [22], as experimentally demonstrated in an optically pumped InGaAsP quantum-well platform [23, 24]. For the aforementioned systems, transmission through the bus waveguide remains reciprocal for incidence from either side in both the -symmetric and -broken phases, given that the system operates in the linear regime. However, in some broken-symmetry phases, as a result of a strong field localization occurred in the gain ring further enhances nonlinear effects, enabling nonreciprocal transmission [25].
In this work, we investigate two mutually coupled ring resonators with one light wave amplifying and another light wave dissipative, externally coupled to a common straight bus waveguide, as shown in Figure 1. We consider identical wave propagation constants in the two rings, an reciprocal pair of amplification and attenuation factors, and same unitary directional couplers describing evanescent coupling regimes. Under these conditions as well as analyzing from a transfer-matrix formulation, we show that the system exhibits effective -symmetry even when the refractive-index distribution used in our full-wave electromagnetic simulations does not meet .

Figure 1. Schematic of two mutually coupled ring resonators, with gain in the left ring () and loss in the right ring (), each coupled to a common straight bus waveguide. Both rings have radius and waveguide width . The clockwise and counterclockwise circulating field amplitudes are denoted by and , respectively. Coupling regions 1, 2, and 3 correspond to the left ring–bus, inter-ring, and right ring–bus couplers, respectively. The labels − and + indicate the input and output sides of each coupler for the corresponding propagation direction. In the two-port bus waveguide, and denote right-propagating field amplitudes, whereas and denote left-propagating field amplitudes.
Reciprocity in our system is conserved. Consequently, we can parameterize the transfer matrix in terms of the coupler through-coupling coefficient, the attenuation factor, and the propagation phase. As a result, we propose a general phase diagram to identify symmetry phase, symmetry breaking point, and symmetry broken phase. Moreover, we also derive analytical conditions for a transmission extinction, coherent perfect absorption and lasing (CPAL), and unidirectional reflectionlessness. Transmission extinction and unidirectional reflectionlessness can occur away from resonance, whereas CPAL occurs at a whispering-gallery resonance when the coupling coefficient and the round-trip attenuation factor satisfy a specific relation. Notably, systems satisfying the CPAL parameter condition exhibit a common sequence of scattering feature as the propagation phase varies: transmission extinction, unidirectional reflection for incidence from the loss-ring side, and CPAL. This sequence recurs periodically in the propagation phase and, when dispersion is neglected in frequency.
sion is neglected in frequency. We validate these analytical predictions using full-wave electromagnetic simulations in COMSOL Multiphysics. Our work provides design guidelines for implementing coupled ring resonators with unique scattering integrated into silicon-photonic platforms.
Theory
We consider two mutually coupled ring resonators, each externally coupled to a common straight bus waveguide, as shown schematically in Figure 1. Both ring resonators have the same radius and width , with the left ring containing a gain medium and the right ring containing a lossy medium. The bus waveguide has two ports, allowing excitation from either side. All waveguides are assumed to be operated at a single mode. The light field can be approximately represented by , where is the complex field amplitude and is the effective propagation phase. Throughout this work, we adopt the time dependence .
The system contains three wave coupling regions, labeled 1, 2, and 3, where adjacent waveguides interact through overlapping evanescent fields. Each coupling region is modeled as a lossless directional coupler as well as is described by the same symmetric and unitary coupling matrix . This unitary coupling matrix had been experimentally demonstrated in Ref. [7]. We note that and are the real amplitude through- and cross-coupling coefficients, respectively, also satisfying .
Each ring supports clockwise and counterclockwise circulating modes, denoted by and , respectively, where the superscripts and represent the left and right rings. At the inter-ring coupling region, the clockwise mode in either ring couples to the counterclockwise mode in the other, yielding
and
Here, the superscripts and on the coupling-region denote the input and output sides, respectively, for each propagation direction.
At the coupling region between the left ring and the bus waveguide, the clockwise and counterclockwise modes satisfy
and
respectively. Similarly, at the coupling region between the right ring and the bus waveguide, we have
and
respectively.
We denote the real effective propagation constants in the left and right rings by and , respectively. The corresponding field amplitude factors, after one round-trip, are for the amplifying left ring and for the dissipative right ring. We impose equal propagation constants and reciprocal round-trip amplitude factors .
Combining these coupling relations and required conditions yields the overall transfer matrix relation:
Here, relates the field amplitudes at the left and right leads of the bus waveguide. Its explicit elements and detailed derivation are provided in Appendix A.
Phase diagram
Inspection of reveals that , , and . In addition, ensures a reciprocal transmission. These relations bring , demonstrating the effective symmetry of our studying system. As a result, these constraints allow us to parameterize following [26, 27].
We consider the scattering matrix through
We then write and , where and are real, and define . The corresponding scattering eigenvalues and right scattering eigenvectors are
respectively. The components of specify the relative amplitudes and phases of the incident fields . By analyzing scattering eigenvalues and eigenvectors, we can state that the regimes and correspond to the -symmetric and -symmetry broken phases, respectively, while the corresponding reciprocal transmission coefficient is defined as . The transmittance gives and in -symmetric and -symmetry broken phases, respectively [26, 27]. At , provided that exactly one of and vanishes, the system reaches a -exceptional point with , also known for symmetry breaking point [28, 29]. Our -symmetry breaking point is a second-order exceptional point of the scattering matrix, where both eigenvalues and eigenvectors coalesce [30, 31]. The detailed derivation and classification are provided in Appendix § 2.2.
Accordingly, Figure 2 presents scattering phase diagrams in the plane for selected values of the round-trip effective propagation phase . We write , where is the effective refractive index of two circulating modes for both rings, is the vacuum wavenumber, and is an incident wavelength. In Figure 2, the yellow and red regions represent the -symmetric and -broken scattering phases, respectively, separated by exceptional-point boundaries marked by green and purple curves. These diagrams provide a unified description of the scattering behavior for systems satisfying the assumptions of our model, irrespective of their specific geometric and material parameters.

Figure 2. Scattering phase diagrams in the plane for selected values of the round-trip propagation phase : (a) , (b) , (c) , (d) , (e) , and (f) . Here, is the through-coupling coefficient and is the round-trip attenuation factor. Yellow and red regions denote the -symmetric () and -broken () scattering phases, respectively. The purple and green curves mark exceptional-point boundaries (). Black dashed curves indicate transmission extinction (), while the blue curve in (f) indicates coherent perfect absorption and lasing (CPAL).
Discussion
General unitary relation
The reflection coefficients for an incidence from the right (loss-ring side) and left (gain-ring side) sides are and , respectively. The corresponding reflectances are and . Combining the parameterization with reciprocity and symmetry yields the generalized unitarity relation, , already proposed in [26]. Taking the squared modulus yields the generalized conservation relation for reciprocal, one-dimensional -symmetric two-port systems.
Uni-directional reflectionless, A self-dual spectral singularity, and transmission extinction
To have a reflectionless at the right side, it should meet , yielding
The generalized conservation relation further implies . Since is real and bounded by , the allowed attenuation factor must additionally satisfy . In Figure 2, the corresponding parameter combinations of satisfying are indicated by the green curves, which coincide with the exceptional-point boundaries, as expected.
Similarly, a reflectionlessness for incidence from the left requires , yielding
The generalized conservation relation again implies . For the requirement of real and , it demands . This condition is achievable only for . The purple curves in Figure 2 indicate which coincide with the exceptional-point boundaries and occur only for , as expected.
We further examine whether bidirectional reflectionlessness, and , can occur. Combining the two reflectionless conditions yields . For , this requires , with . Thus, bidirectional reflectionlessness is excluded in the balanced gain-loss regime considered here, since .
Coherent perfect absorption (CPA) requires , which gives . Similarly, the lasing threshold requires , yielding . symmetry intrinsically imposes , as a result of their zero solutions being simultaneously satisfied to give CPAL.
Since and , the resulting CPAL conditions are
Thus, CPAL occurs at a whispering-gallery resonance when the through-coupling coefficient and the round-trip attenuation factor satisfy Eq. (5). Consequently, at the CPAL point, both reflectances and and the transmittance diverge under a single-sided excitation. The corresponding parameter combinations are indicated by the blue curve in Figure 2(f).
We next consider transmission extinction, i.e., , which occurs when
provided that the numerator of remains nonzero. A transmission extinction () lies in the -symmetric phase, supporting by the corresponding parameter combinations with dashes black lines in Figure 2(f). With , the generalized conservation relation yields , so that the left and right reflectances form a reciprocal pair.
Although unidirectional reflectionlessness, transmission extinction, and CPAL cannot occur at the same incident wavelength, suitably chosen system parameters allow these phenomena to occur at distinct values of the round-trip propagation phase , corresponding to different incident wavelengths . As an example, Figure 3(a) shows the scattering response for and . Transmission extinction () occurs at , , , and . Right-incidence reflectionlessness () occurs at , , , and , whereas left-incidence reflectionlessness () occurs at , , , and . Each set of scattering features repeats with a phase period of .

Figure 3. Transmittance (black), right-incidence reflectance (green), and left-incidence reflectance (purple) as functions of the round-trip propagation phase . (a) For and , transmission extinction and unidirectional reflectionlessness from either side occur at distinct phases. (b) For and , CPAL occurs at the resonances . Each CPAL point is symmetrically flanked by right-incidence reflectionlessness and transmission extinction on both sides. (c) Coherent perfect absorption (blue) and lasing (red) under the corresponding excitation conditions for the same parameters as in (b). These scattering features recur with a period of in .
We next consider a system satisfying the CPAL condition, with and , as shown in Figure 3(b). At the resonance , the transmittance and both reflectances and diverge under single-sided excitation in the linear model, indicating the lasing threshold associated with CPAL.
To characterize the scattering response under coherent two-sided excitation, we define the ratio of total outgoing to total incoming power in the common bus waveguide as , where the port amplitudes are conveniently power-normalized. For incident light fields in the bus waveguide satisfying with the appropriate relative amplitudes and phases, we then have , which vanishes at the CPAL point, where . The numerical calculation is verified in a blue line of Figure 3(c). For comparison, equal-amplitude, in-phase excitation, , gives , as shown in a red line of Figure 3(b). Unless the excitation satisfies the CPA input condition, any deviation leads to amplified at the CPAL point.
Interestingly, Figure 3(b) shows transmission extinction () and right-incidence reflectionlessness () near the CPAL point. To understand these accompanying scattering features, we examine the transmission and reflection coefficients under the CPAL parameter constraint specified in Eq. (5).

Figure 4. Scattering features as functions of the round-trip propagation phase under the CPAL parameter constraint, with (a) , (b) , (c) , (d) , (e) , and (f) . Dark black, red, and blue dots indicate CPAL at , right-incidence reflectionlessness (), and transmission extinction (), respectively. Yellow and red bars denote the -symmetric and -broken phases, respectively. Left-incidence reflectionlessness () is absent under the CPAL parameter constraint.
Substituting this constraint into the condition yields , , where
For , we give . Thus, right-incidence reflectionless points occur symmetrically on either side of each CPAL resonance, with phase offsets smaller than .
Under the CPAL parameter constraint, the condition requires . However, through analysis, we can discover that for , no real propagation phase satisfies . This remarkable result reveals that the CPAL parameter constraint excludes left-incidence reflectionlessness (the gain ring side), in contrast to the example with in Figure 3(a), whose parameters do not satisfy this constraint.
We next examine transmission extinction () under the CPAL parameter constraint. The corresponding transmission extinction condition reduces to
arccos where , , and .
However, for , only the root yields a real propagation phase. The transmission extinction points are consequently located at
The round-trip phase separation between the two transmission extinction points bracketing a CPAL resonance is thus
Finally, Figure 3 summarizes the locations of transmission extinction, right-incidence reflectionlessness, and CPAL, together with the associated scattering phases, as functions of under the CPAL parameter constraint. The round-trip attenuation factors are (a) , (b) , (c) , (d) , (e) , and (f) .
As increases through each resonance , these systems exhibit a common sequence of scattering features: transmission extinction, right-incidence reflectionlessness, CPAL, right-incidence reflectionlessness, and transmission extinction. This sequence repeats with a phase period of . Furthermore, the phase separation decreases as approaches unity, corresponding to weaker round-trip amplification and attenuation, consistent with Eq. (10).
Electromagnetic Simulations
To verify our analytical results, we perform electromagnetic simulations using COMSOL Multiphysics. We first consider a single ring resonator coupled to a straight bus waveguide, with a lossless core material in the ring. This configuration is used to identify the whispering gallery resonances and extract the through-coupling coefficient and round-trip attenuation factor . The resonance condition is determined by the round-trip propagation phase, whereas critical coupling additionally requires the round-trip attenuation factor to match the magnitude of the through-coupling coefficient.
We distinguish the material refractive index from the effective refractive index of a guided mode. The latter determines the propagation phase in the ring and bus waveguides. Both waveguides have the same width and core and cladding materials. Our numerical results indicate that the real parts of their effective refractive indices are approximately equal for the configurations considered here. Even with lossless constituent materials, the ring can exhibit attenuation through bending-induced radiation and other leakage loss. Such attenuation can be represented by an imaginary part of the effective propagation constant and incorporated into the round-trip field-amplitude factor .
The coupling coefficient is controlled primarily by the gap between adjacent waveguides. Within the coupling regime considered here, reducing the gap enhances cross coupling and decreases the through-coupling coefficient . The round-trip factors and are controlled primarily by introducing material loss and gain, respectively. Increasing the loss decreases , whereas increasing the gain increases . Although these adjustments can also affect the modal indices and coupling, our numerical results indicate that the coupling and round-trip amplitude factors can be tuned approximately independently over the parameter range considered.
The parameter extraction and inverse-design procedure for the single-ring configuration are detailed in Appendix VIII. Using the calibrated components, we then construct the two mutually coupled rings, each coupled to the common bus waveguide, and verify the resulting scattering response.
To test the predicted CPAL response, we consider and , which lie close to the CPAL parameter condition. The left panel of Figure 5(a) shows the analytical spectra, with a pronounced divergence of the transmittance and right-incidence reflectance at the resonance near . The right panel compares the analytical results (solid curves) with electromagnetic simulations performed using COMSOL Multiphysics (blue stars for and red circles for ). Material dispersion is neglected in these simulations. The numerical results reproduce the main spectral features, including transmission extinction and right-incidence reflectionlessness on either side of the central resonance.

Figure 5. Analytical and stimulating scattering responses of two mutually coupled rings externally coupled to a bus waveguide. (a) Transmittance (blue) and right-incidence reflectance (red) for and , satisfying the CPAL parameter constraint. The left panel shows the resonant divergence near predicted by our analytical model, while the right panel highlights the accompanying transmission extinction and right-incidence reflectionlessness. Here blue crosses and red circles are obtained by the COMSOL Multiphysics simulation. (b) Corresponding spectra for and , which do not satisfy the CPAL parameter constraint. The right panel shows an enlarged view of transmission extinction and right-incidence reflectionlessness. Solid curves represent analytical results, while blue stars and red circles denote COMSOL Multiphysics results for and , respectively. (c)–(e) Simulated electric-field magnitude distributions under right incidence: (c) near the CPAL resonance in (a), (d) at transmission extinction in (a), and (e) at transmission extinction in (b). Red arrows indicate the incident-wave direction.
Figure 5(c) shows the simulated electric-field magnitude near the CPAL resonance under excitation from the right. The field is strongly enhanced within the rings, reaching values on the order of of the electric field.
Figure 5(d) shows the field distribution at , corresponding to transmission extinction. The strongly suppressed field in the left output segment of the bus waveguide supports the predicted vanishing transmittance. This extinction results from destructive interference between the directly transmitted field and the fields coupled back into the bus waveguide from the rings. Compared with Figure 5(c), the pronounced interference fringes on the right side indicate a substantial reflected field. At this wavelength, the simulated field magnitude in the loss ring can exceed that in the gain ring.
For comparison, we consider a second system with and , which does not satisfy the CPAL parameter condition. Figure 5(b) compares the analytical spectra with the COMSOL results using the same line and symbol conventions as in Figure 5(a). Unlike the CPAL case, both and exhibit a local minimum near the central resonance at , flanked by two peaks. Transmission extinction and right-incidence reflectionlessness also occur away from the central resonance, as highlighted in the right panel. The simulated extinction and reflectionless wavelengths are approximately and , respectively. The field distribution at the extinction transmission wavelength, shown in Figure 5(e), again exhibits strongly suppressed transmission into the left output segment, consistent with the analytical prediction.
The simple ring-bus architecture considered here builds on established silicon photonic components compatible with complementary metal–oxide–semiconductor (CMOS) fabrication technologies [32]. Active microring devices have also been demonstrated through hybrid III–V/silicon integration [12]. These advances suggest a route toward realizing the predicted scattering phenomena in silicon photonic integrated circuits.
Conclusion
We have analytically established an effective symmetry in two mutually coupled ring resonators. Combining this symmetry with reciprocity, we developed a parametrized phase diagram that classifies the scattering phases and identifies transmission extinction and reflectionlessness for incidence from either side. CPAL occurs at a whispering-gallery resonance when the through-coupling coefficient and the round-trip attenuation factor satisfy a specific relation.
Under this CPAL parameter constraint, all systems exhibit a common sequence of scattering features around each resonance: transmission extinction, loss-side reflectionlessness, CPAL, loss-side reflectionlessness, and transmission extinction. This sequence repeats periodically in the round-trip propagation phase. We derived the phase separation between the extinction points bracketing each CPAL resonance, which narrows as the round-trip gain and loss factors become weaker. We also showed that gain-side reflectionlessness is excluded under the CPAL parameter constraint but can occur for other parameter combinations. Electromagnetic simulations using COMSOL Multiphysics reproduce the principal analytical scattering features. Together with established ring-resonator integration technologies, our work provides design guidelines for exploring CPAL and its accompanying scattering features in silicon photonic platforms.
Derivation of the Transfer Matrix
At the inter-ring coupling region, the counterclockwise mode in the left ring couples to the clockwise mode in the right ring according to
Using and rearranging these relations, we obtain
where
Next, we consider the coupling between the clockwise mode in the right ring and the left-propagating mode in the bus waveguide:
Rearranging this equation gives
Propagation along the right ring relates the field amplitudes at coupling regions 2 and 3 through
where is the ring radius and is the round-trip field-amplitude attenuation factor. The fractional powers of assume uniformly distributed attenuation along the ring.
Substituting these propagation relations yields
with
Propagation in the left ring gives
where is defined as the round-trip field-amplitude amplification factor and assumed to be uniformly distributed along the ring.
These relations can be written as
where
At the coupling region between the left ring and the bus waveguide, the counterclockwise mode satisfies
Rearranging this relation yields
To account for the ordering of the field amplitudes, we introduce the permutation matrix
Combining the coupling and propagation relations gives
Since , this expression simplifies to
Balanced amplification-dissipation and equality of propagation constants
We impose reciprocal round-trip amplitude factors and equal propagation constants,
Defining and , we obtain
with
where has been used.
Coupling between the clockwise mode in the left ring and the counterclockwise mode in the right ring
At the inter-ring coupling region, the clockwise mode in the left ring couples to the counterclockwise mode in the right ring according to
Rearranging this relation gives
Propagation in the left ring gives
Combining these propagation and coupling relations yields
where
At the coupling region between the left ring and the bus waveguide, the clockwise mode satisfies
This relation can be rewritten as
Consequently,
Similarly, at the coupling region between the right ring and the bus waveguide, the counterclockwise mode satisfies
Rearranging this relation gives
Propagation in the right ring gives
We therefore obtain
where
Combining this result with Eq. (43) yields
Again, under the conditions
The matrix in Eq. (50) then becomes
with
where has been used.
Overall transfer matrix under balanced amplification and dissipation
Rearranging Eq. (27), we obtain
Similarly, rearranging Eq. (50) gives
Propagation through the bus waveguide between the two ring–bus coupling regions introduces a real phase , such that
Substituting these relations yields
where
Eliminating the intermediate field amplitudes and , we obtain the overall transfer relation
Under the conditions and , we again use and . For compactness, we define
The elements of the overall transfer matrix are then
where has been used. All parameters , , , , , and are real, with . Consequently, , and the transfer matrix satisfies
Together with reciprocity, i.e., , these relations imply
demonstrating the effective symmetry in our two mutually coupled ring system.
Symmetry Phase, Symmetry Breaking Point, and Symmetry Broken Phase
The scattering matrix in our analysis is through
Since the off-diagonal elements of are purely imaginary, we write
where and are real. Using and , we obtain
The scattering eigenvalues are
For , the corresponding right eigenvectors can be chosen as
These eigenvectors specify the relative amplitudes and phases of the two incident fields required to excite each scattering eigen ports:
Design Principles for Coupled Ring Resonators
For , both eigenvalues are unimodular, , corresponding to the -symmetric phase with . For , their magnitudes satisfy , with and . This regime corresponds to the -symmetric broken phase with , in which the two eigenvalues exhibit amplification and attenuation, respectively.
At , the eigenvalues coincide at , and . If exactly one of and vanishes, the eigenvectors also coalesce, yielding a second-order exceptional point. For and , the coalesced eigenvector is , corresponding to left incidence and reflectionlessness from the left. For and , it is , corresponding to right incidence and reflectionlessness from the right. However, if , supports two independent eigenvectors and describes bidirectional reflectionlessness rather than an exceptional point.
We first consider a single ring resonator externally coupled to a straight bus waveguide, as shown in Figure 6. Both waveguides have a width of , and the ring radius is . The edge-to-edge coupling gap, denoted by , is varied to obtain the desired through-coupling coefficient . The core and cladding refractive indices are initially set to 2.5 and 1.5, respectively, for both waveguides.

Figure 6. Schematic of a single ring externally coupled to a bus waveguide.
Using COMSOL Multiphysics, we calculate the complex transmission coefficient under single-sided excitation over the wavelength range 1.555–1.566 . The spectrum exhibits a whispering-gallery resonance near , accompanied by a pronounced transmission minimum. We then introduce material gain into the ring core by setting
while retaining the remaining material and geometric parameters. The resulting transmission spectrum exhibits a resonant peak near the same wavelength.
To extract the effective model parameters, we fit the simulated complex transmission coefficient using the single-ring expression , . Here, is the net round-trip field-amplitude factor, including material gain or loss and radiative attenuation, whereas is the real effective index governing the propagation phase. The fitted parameters are treated as constant over the wavelength interval considered.
The fit gives and . The COMSOL can give . Figure 7 compares the simulated transmission coefficient with the fitted model, showing its magnitude, imaginary part, and real part. The model reproduces the principal features of the complex transmission spectrum.

Figure 7. Comparison of the analytical model (solid curves) and COMSOL Multiphysics simulations (red dots) for the complex transmission coefficient of a single ring resonator coupled to a bus waveguide: (a) transmittance , (b) imaginary part , and (c) real part .
We repeat this procedure for different coupling gaps and imaginary parts of the ring-core refractive index. The coupling gap primarily controls and , whereas the imaginary part of the material index primarily controls the round-trip field amplitude factor . Within the coupling regime considered here, decreasing the gap reduces . Increasing material loss decreases , while increasing material gain increases it.
For the CPAL demonstrated in Figure 5 (a), (Figure 5c), and (Figure 5d), we list the corresponding material and geometry parameters:
| Lossy ring | Gain ring |
Table 1.
For demonstrated in Figure 5 (b) and (Figure 5d), we list the corresponding material parameters:
| Loss ring | Gain ring |
Table 2.
References
- [1]M. T. Hill, H. J. S. Dorren, T. de Vries, X. J. M. Leijtens, J. H. Besten, B. Smalbrugge, Y.-S. Oei, H. Binsma, G.-D. Khoe, and M. K. Smit, A fast low-power optical memory based on coupled micro-ring lasers, Nature 432, 206 (2004).pubmed.ncbi.nlm.nih.gov/15538365
- [2]J. Wiersig, Structure of whispering-gallery modes in optical microdisks perturbed by nanoparticles, Phys. Rev. A 84, 063828 (2011).DOI
- [3]W. Chen, Ş. K. Özdemir, G. Zhao, J. Wiersig, and L. Yang, Exceptional points enhance sensing in an optical microcavity, Nature 548, 192 (2017).DOI
- [4]R. E. Scott, P. M. Alsing, A. M. Smith, M. L. Fanto, C. C. Tison, J. Schneeloch, and E. E. Hach III, Scalable controlled-NOT gate for linear optical quantum computing using microring resonators, Phys. Rev. A 100, 022322 (2019).DOI
- [5]A. Dutt, K. Luke, S. Manipatruni, A. L. Gaeta, P. Nusssenzweig, and M. Lipson, On-chip optical squeezing, Phys. Rev. Applied 3, 044005 (2015).DOI
- [6]V. R. Almeida, C. A. Barrios, R. R. Panepucci, and M. Lipson, All-optical control of light on a silicon chip, Nature 431, 1081 (2004).pubmed.ncbi.nlm.nih.gov/15510144
- [7]M. Cai, O. Painter, and K. J. Vahala, Observation of critical coupling in a fiber taper to a silica-microsphere whispering-gallery mode system, Phys. Rev. Lett. 85, 74 (2000).pubmed.ncbi.nlm.nih.gov/10991162
- [8]Y. D. Chong, L. Ge, H. Cao, and A. D. Stone, Coherent perfect absorbers: Time-reversed lasers, Phys. Rev. Lett. 105, 053901 (2010).
- [9]D. G. Baranov, A. Krasnok, T. Shegai, A. Alù, and Y. Chong, Coherent perfect absorbers: Linear control of light with light, Nat. Rev. Mater. 2, 17064 (2017).
- [10]W. Wan, Y. Chong, L. Ge, H. Noh, A. D. Stone, and H. Cao, Time-reversed lasing and interferometric control of absorption, Science 331, 889 (2011).DOI
- [11]Y. Wan, J. Norman, Q. Li, M. J. Kennedy, D. Liang, C. Zhang, D. Huang, Z. Zhang, A. Y. Liu, A. Torres, D. Jung, A. C. Gossard, E. L. Hu, K. M. Lau, and J. E. Bowers, 1.3 μm submillilamp threshold quantum dot micro-lasers on Si, Optica 4, 940 (2017).
- [12]D. Liang, M. Fiorentino, T. Okumura, H.-H. Chang, D. T. Spencer, Y.-H. Kuo, A. W. Fang, D. Dai, R. G. Beausoleil, and J. E. Bowers, Electrically-pumped compact hybrid silicon microring lasers for optical interconnects, Opt. Express 17, 20355 (2009).DOI
- [13]Q. Luo, C. Yang, R. Zhang, Z. Hao, D. Zheng, H. Liu, X. Yu, F. Gao, F. Bo, Y. Kong, G. Zhang, and J. Xu, On-chip erbium-doped lithium niobate microring lasers, Opt. Lett. 46, 3275 (2021).
- [14]H. Rong, S. Xu, Y.-H. Kuo, V. Sih, O. Cohen, O. Raday, and M. Paniccia, Low-threshold continuous-wave Raman silicon laser, Nat. Photonics 1, 232 (2007).DOI
- [15]J. S. Levy, A. Gondarenko, M. A. Foster, A. C. Turner-Foster, A. L. Gaeta, and M. Lipson, CMOS-compatible multiple-wavelength oscillator for on-chip optical interconnects, Nat. Photonics 4, 37 (2010).DOI
- [16]A. Mostafazadeh and S. Rostamzadeh, Perturbative analysis of spectral singularities and their optical realizations, Phys. Rev. A 86, 022103 (2012).DOI
- [17]A. Mostafazadeh, Self-dual spectral singularities and coherent perfect absorbers without PT-symmetry, J. Phys. A: Math. Theor. 45, 444024 (2012).DOI
- [18]A. Guo, G. J. Salamo, D. Duchesne, R. Morandotti, M. Volatier-Ravat, V. Aimez, G. A. Siviloglou, and D. N. Christodoulides, Observation of PT-symmetry breaking in complex optical potentials, Phys. Rev. Lett. 103, 093902 (2009).pubmed.ncbi.nlm.nih.gov/19792798
- [19]G. C. Makris, R. El-Ganainy, D. N. Christodoulides, and Z. H. Musslimani, Beam dynamics in PT symmetric optical lattices, Phys. Rev. Lett. 100, 103904 (2008).pubmed.ncbi.nlm.nih.gov/18352189
- [20]S. Longhi and L. Feng, PT-symmetric microring laser-absorber, Opt. Lett. 39, 5026 (2014).DOI
- [21]J. Choi and H. Noh, Reverse circulation mode based on optical antiresonance in single microring resonators with parity-time structure, Phys. Rev. B 111, 075424 (2025).DOI
- [22]V. V. Konotop, B. C. Sanders, and D. A. Zezyulin, “Spectral singularities of a potential created by two coupled microring resonators,” Opt. Lett. 44, 2024 (2019).DOI
- [23]H. Hodaei, M. A. Miri, A. U. Hassan, W. E. Hayenga, M. Heinrich, D. N. Christodoulides, and M. Khajavikhan, Parity-time-symmetric coupled microring lasers operating around an exceptional point, Opt. Lett. 40, 4955 (2015).DOI
- [24]Hodaei, Hossein, et al., ”Parity-time–symmetric microring lasers.” Science 346.6212 (2014): 975-978.DOI
- [25]B. Peng, S. K. Özdemir, F. Lei, F. Monifi, M. Gianfreda, G. L. Long, S. Fan, F. Nori, C. M. Bender, and L. Yang, Parity-time-symmetric whispering-gallery microcavities, Nat. Phys. 10, 394 (2014).DOI
- [26]L. Ge, Y. D. Chong, and A. D. Stone, Conservation relations and anisotropic transmission resonances in one-dimensional PT-symmetric photonic heterostructures, Phys. Rev. A 85, 023802 (2012).DOI
- [27]J. Y. Lee and P.-Y. Chen, Generalized parametric space, parity symmetry of reflection, and systematic design approach for parity-time-symmetric photonic systems, Phys. Rev. A 104, 033510 (2021).DOI
- [28]W. D. Heiss, The physics of exceptional points, J. Phys. A: Math. Theor. 45, 444016 (2012).
- [29]Y. D. Chong, L. Ge, and A. D. Stone, PT-symmetry breaking and laser-absorber modes in optical scattering systems, Phys. Rev. Lett. 106, 093902 (2011).pubmed.ncbi.nlm.nih.gov/21405622
- [30]M.-A. Miri and A. Alù, Exceptional points in optics and photonics, Science 363, ea ar7709 (2019).DOI
- [31]H. Hodaei, A. U. Hassan, S. Wittek, H. Garcia-Gracia, R. El-Ganainy, D. N. Christodoulides, and M. Khajavikhan, Enhanced sensitivity at higher-order exceptional points, Nature 548, 187 (2017).DOI
- [32]W. Bogaerts, P. De Heyn, T. Van Vaerenbergh, K. De Vos, S. K. Selvaraja, T. Claes, P. Dumon, P. Bienstman, D. Van Thourhout, and R. Baets, Silicon microring resonators, Laser Photonics Rev. 6, 47 (2012).