WorksPhysics and Astronomy
Hydrogen sublattice in LaH: structural stability and possible ordering motifs
Abstract
Lanthanum polyhydrides, synthesized under extreme pressure, exhibit near-room-temperature superconductivity. Finding a precise arrangement of the hydrogen sublattice that is critical for understanding the strong electron-phonon coupling remains experimentally unresolved due to the small X-ray scattering form factor of hydrogen atoms. In this work, we attempt to computationally reconstruct hydrogen sublattices of the LaH at 100-200 GPa combining unconstrained evolutionary searches and structure generation with fixed lanthanum sublattice. By implementing a similarity metric, we screen the computationally generated configurations against experimental powder X-ray diffraction data. We specifically identify the trigonal -LaH and pseudo-hexagonal -LaH phases, which demonstrate close agreement with the experimental X-ray diffraction data. First-principles calculations confirm the metallic and superconducting nature of these hydrides. Crucially, our lattice dynamics analysis using the stochastic self-consistent harmonic approximation (SSCHA) indicates that these structures are dynamically stable. We reveal the presence of molecular H units and soft phonon modes in the trigonal LaH that suppresses superconductivity ( K), while the hydrogen clathrate network in the phase drives strong electron-phonon interactions, yielding the coupling parameters of , meV and transition temperature of K at 150 GPa.
Introduction
Lanthanum superhydrides are among the highest- conventional superconductors known: thermodynamically stable -LaH demonstrates superconductivity near 250 K under megabar pressures Drozdov et al. [ [10], Somayazulu et al. [ [30]. Syntheses in diamond anvil cells (DACs) at various pressures have yielded many different hydrogen- and deuterium-rich phases, specifically LaH and LaH, which may exhibit superconducting properties (onset) up to 280 K Semenok et al. [ [29]. A possible indication of this superconductivity was found in radio-frequency transmission and nuclear magnetic resonance (H NMR) relaxometry measurements Semenok et al. [ [29]. Although powder X-ray diffraction (XRD) resolves only heavy lanthanum sublattices, identifying a cubic phase at 115 GPa and a hexagonal phase refined as the phase at 165 GPa Semenok et al. [ [29], it does not locate hydrogen atoms due to their very small X-ray scattering form factor. Consequently, the precise hydrogen arrangement, which governs the electron-phonon coupling (EPC) responsible for the high- superconductivity, remains unresolved.
The determination of the precise hydrogen sublattice in high-pressure polyhydrides is a long-standing challenge. Although neutron diffraction on synthesized deuterides presents a potential experimental workaround, its application is constrained because deuteride compounds frequently exhibit altered thermodynamic stability and structural chemistry driven by zero-point energy (ZPE) effects Drozdov et al. [ [9], Errea et al. [ [11]. Furthermore, neutron diffraction requires larger sample volumes (), which restricts the maximum achievable pressures in the experiments Boehler et al. [ [5]. As a result, the exact hydrogen arrangements remain highly difficult to understand for several essential phases. Notable examples include the widespread -H phase (X = Y, Sm, Tb, ...) and other recently identified single-crystal structures (e.g. YH) Aslandukova et al. [ [2], as well as complex stoichiometries HS Laniel et al. [ [20] and LaD Drozdov et al. [ [10]. Among these unresolved phases, the structure LaH is special, because recent theoretical studies on highly symmetric analogues of this phase, namely -ScH, MgH, and LuH Jiang et al. [ [15], predict high superconducting critical temperatures approaching 300 K. Thus, searching for the exact hydrogen arrangement in LaH provides a crucial key to understanding the mechanisms driving near-room-temperature superconductivity in this structural family.
To overcome these experimental limitations, advanced computational methods of crystal structure search have become crucial Oganov et al. [ [25], Zurek and Grochala [ [35]. In this work, we describe an attempt to computationally reconstruct the hydrogen sublattice of LaH and investigate its physical properties, thermodynamic and dynamic stability under high pressures. We employ a comprehensive search strategy utilizing both the USPEX evolutionary algorithm for unconstrained structural searches Glass et al. [ [14] and the EnvXGen crystal structure generator to strictly place hydrogen atoms within a fixed experimental unit cell with one or two La atoms Propad and Kruglov [ [28]. Moreover, we introduce a quantitative structure similarity metric to filter the generated configurations. Through this approach, we identify motifs that match the experimental XRD profile while maintaining thermodynamic competitiveness on the convex hull, and dynamical stability within an anharmonic approximation Errea et al. [ [12], Monacelli et al. [ [22].
Computational methodology
Crystal structure search
To identify thermodynamically stable atomic configurations in La-H phases under megabar pressures, we employed a structure generation approach. First-principles calculations based on density functional theory (DFT) were carried out using the Vienna Ab Initio Simulation Package (VASP) Kresse and Furthmüller [ [16], Kresse and Hafner [ [18, 19]. The projector-augmented wave (PAW) method was used to treat interactions of core-valence electrons Blöchl [ [4], while the exchange-correlation energy was described by the generalized gradient approximation (GGA) with the functional of Perdew-Burke-Ernzerhof (PBE) Perdew et al. [ [27]. A plane-wave basis set was defined with a kinetic energy cutoff of 600 eV for all structural relaxations.
Global unconstrained structural searches were performed using the evolutionary algorithm USPEX Glass et al. [ [14], targeting the LaH, LaH and LaH stoichiometries, where Z (number of lanthanum atoms in the unitcell) is varied from 1 to 4. The initial population consisted of 120 structures, while subsequent population sizes comprised 100 structures. Generations were produced by applying evolutionary variation operators with the following distribution: 50% heredity, 20% random symmetric generation, 10% random topological generation and 20% soft mode mutation. The evolutionary algorithm was allowed to run for a maximum of 120 generations, employing an early stopping criterion if the best predicted structure remained unchanged for 36 consecutive generations. To accelerate the exploration of the potential energy surface, the evolutionary search was also coupled with a machine-learned interatomic potential, MatterSim Yang et al. [ [34]. Structural relaxation and enthalpy evaluation were conducted in four sequential stages, where the Brillouin zone sampling was tightened from a Γ-centered Monkhorst-Pack (MP) Monkhorst and Pack [1976] k-point grid spacing of 0.12 Å to 0.06 Å.
To resolve the precise hydrogen sublattice within the established heavy-atom framework known from the XRD experiment, we utilized the EnvXGen algorithm Propad and Kruglov [ [28]. Candidate structures generated by EnvXGen were subjected to a two-step DFT structural relaxation protocol. In the initial stage, preliminary optimization was conducted with a constrained lanthanum sublattice to sample configurations with optimal hydrogen positions. The electronic convergence for the self-consistent field (SCF) cycles was set eV, the structures were relaxed until the residual forces on each atom were less than eV/Å and a Γ-centered Monkhorst-Pack (MP) Monkhorst and Pack [1976] k-point grid spacing of 0.20 Å was utilized. In the subsequent stage, full unconstrained relaxation of atomic positions and lattice parameters was performed, establishing the electronic SCF convergence of eV, a force threshold of eV/Å and a k-point spacing of 0.15 Å.
Metric Evaluation
Configurations generated by EnvXGen were screened against the experimentally known La sublattice using the ALIGNN descriptor Choudhary and DeCost [2021] as a preliminary filter, where a structural correspondence was assessed by cosine similarity:
where and represent the ALIGNN feature vectors for the experimental and calculated sublattices, respectively. In addition to assessing the generated structures, we implemented an integral metric for the direct comparison of diffractograms. A Gaussian broadening function was applied to both the experimental and theoretical discrete reflections to reconstruct intensity profiles. The broadened intensity profile for either datasets is generated as follows:
where and are the intensity and position of the -th Bragg peak, and is the broadening parameter (set to 0.15°). This procedure yields the continuous profiles and . To account for slight pressure deviations that cause minor lattice volume variations, a linear angular shift was introduced to the calculated pattern:
The optimal shift parameter was determined by minimizing the absolute area difference between the reconstructed experimental pattern and the shifted theoretical pattern using a gradient-free optimization algorithm:
This metric enabled the isolation of high-symmetry configurations, which optimally reproduced the experimental XRD profiles.
Electronic and thermodynamic properties
To evaluate the dynamic stability of the obtained high-symmetry structures and construct the thermodynamic convex hull, we calculated harmonic phonon dispersions and phonon densities of states (DOS). These calculations were performed തീരുമ using the finite displacement method as implemented in the Phonopy code Togo [ [32], Togo and Tanaka [ [33]. The interatomic forces were computed using VASP with grid supercells, an electronic SCF convergence criterion of eV and an atomic displacement amplitude of 0.01 Å. Thermodynamic stability was assessed by calculating the formation enthalpies of the generated structures and constructing the convex hull phase diagram, explicitly incorporating the ZPE corrections estimated from the harmonic phonon spectra with removed imaginary modes.
To confirm the metallic nature of the obtained hydrides and quantify the orbital hybridization at the Fermi level, electronic band structures along high-symmetry k-paths and projected DOS were computed. The electronic properties were calculated in the non-self-consistent regime using a pre-converged charge density with a convergence criterion of eV. The tetrahedron method with Blöchl corrections was used on a finely resolved energy grid of 8000 points, coupled a Γ-centered Monkhorst-Pack (MP) Monkhorst and Pack [ [24] k-point spacing of 0.10 Å and Gaussian smearing with a broadening parameter of 0.05 eV.
Anharmonic lattice dynamics
To account for the large quantum fluctuations of hydrogen atoms and the anharmonicity of the Born-Oppenheimer potential energy surface, we employed the stochastic self-consistent harmonic approximation (SSCHA) Bianco et al. [ [3], Monacelli et al. [ [23]. The SSCHA is a fully variational method in which the true free energy of the system is minimized with respect to a trial harmonic density matrix , which is parameterized by the centroid positions and auxiliary force constants :
where represents the analytical free energy of the trial harmonic Hamiltonian, is the trial harmonic potential, is the true Born-Oppenheimer potential energy evaluated in instantaneous atomic configurations , and are the three unit cell vectors. Within this framework, the spatial probability distribution of the ionic coordinates, given by the diagonal of the density matrix in real space, is mathematically defined as a multidimensional Gaussian distribution.
Due to intractable analytical integration of the exact anharmonic potential for extended systems, the expectation value in Eq. (5) is stochastically evaluated using Monte Carlo integration. A thermal ensemble of random atomic configurations is generated according to the Gaussian probability distribution, and the true Born-Oppenheimer forces for each configuration are computed via DFT. An importance sampling reweighting technique is applied, allowing multiple minimization steps without recalculating DFT forces until the stochastic noise exceeds a critical effective sample size threshold. The parameters and are then iteratively updated using conjugate gradient minimization.
The DFT force calculations for the SSCHA populations were performed using the Quantum ESPRESSO (QE) package Giannozzi et al. [ [13] on grid supercells. The exchange correlation interaction was treated within the GGA and parametrized by PBE. PAW pseudopotentials were used setting the plane-wave kinetic energy of 50 Ry and charge density cut-offs of 500 Ry. The Brillouin zone of the supercell was sampled using a and k-point mesh for both phases -LaH and C2-LaH, respectively. SSCHA minimization was performed at 300 K, where each population consisted of 400 configurations. The number of populations needed to reach convergence depended on the structure and pressure: 12, 14 and 14 for -LaH at 100, 150 and 200 GPa, respectively; 17 for the constrained-lattice LaH search at 150 GPa; and 18, 8 and 17 for C2-LaH at 100, 150 and 200 GPa, respectively. Final free energies and phonon spectra were taken from the last population.
Electron-phonon coupling calculations
The electron-phonon spectral function was evaluated by combining anharmonic dynamical matrices obtained from the SSCHA with static electron-phonon matrix computed within density functional perturbation theory (DFPT). DFPT calculations were performed in QE on the primitive unit-cell using a k-mesh of (-LaH) and (C2-LaH) and the dynamical matrices obtained on the mesh were Fourier-interpolated to (-LaH) and (C2-LaH) q-meshes for the electron-phonon calculations. We extracted phonon frequencies by diagonalizing the SSCHA dynamical matrices and calculated the spectral function:
where is the electronic DOS at the Fermi level , are Kohn-Sham eigenvalues, are band indices, and is the electron wavevector. A mode-resolved electron-phonon matrix is determined by projecting the DFPT deformation potentials onto the anharmonic SSCHA polarization vectors:
where is the mass of atom , is the phonon wavevector, denotes the unit polarization vector of the phonon mode along the Cartesian direction , are Kohn-Sham wavefunctions and is the linear variation of the electronic potential with respect to the atomic displacement. This mathematical projection incorporates quantum fluctuations into the final EPC evaluation.
The total EPC constant and the logarithmic average phonon frequency were obtained from the integrated spectral function:
To eliminate the artificial dependence of the EPC on the finite smearing width used for the Brillouin zone integration, the spectral function was renormalized using the tetrahedron method and scaled as:
where and are the exact DOS evaluated via the tetrahedron method and the DOS obtained with the corresponding smearing scheme, respectively. Consequently, the total EPC constant scales linearly by the exact same factor to result , while the logarithmic average frequency remains mathematically invariant under this uniform scaling. The superconducting transition temperature was then estimated using the Allen-Dynes equation Allen and Dynes [ [1]:
where is the Coulomb pseudopotential representing the effective electron-electron repulsion, and is the Allen-Dynes factor for strong-coupled superconductors Allen and Dynes [ [1]. In our calculations using the Allen-Dynes formula, a standard value of was adopted. The frequency-weighted spectral moment was evaluated to further quantify the EPC strength:
As recently proposed for the screening of hydride superconductors Chen and Yildirim [ [6], may serve as an additional descriptor of the electron-phonon interaction. The conventional EPC constant scales as and artificially diverges near lattice instabilities, whereas the () based formulation contains no inverse phonon frequency factors. Consequently, avoids numerical singularities and remains mathematically finite even in the presence of strong anharmonic phonon softening. This stability makes it a reliable metric for comparing the inherent EPC across structural phases.
Results and Discussion
To explore the configuration space of the LaH system, EnvXGen searches were performed under harmonic pressure at 100, 150 and 200 GPa (Figure 1). Initially, La sublattice was fixed in the high-symmetry cubic cell shape () identified from the experimental diffraction data obtained at 115 GPa Semenok et al. [ [29]. The structure -LaH, analogous to high- phases predicted for ScH and LuH Jiang et al. [ [15], contains H pseudo-molecules characterized by elongated interatomic distances ( Å). Although these quasi-molecular units represent a local potential energy minimum for Sc, Lu, and Mg hydrides in the harmonic and anharmonic approximations, our calculations reveal that this minimum vanishes for La polyhydride in both cases (see Figure S8 in the Supplementary Information). This instability may also point to the inherent limitations of the standard PBE functional, which does not accurately describe the configuration energies and properties of the molecular bond, leading to an underestimate of thermal and ZPE contributions Clay III et al. [ [8]; ], Patel et al. [ [26].
Figure 1. Structural screening of the generated LaH configurations with simple cubic La-sublattice at 100, 150 and 200 GPa. Color gradients indicating the respective space groups. The top panels (a-c) display the calculated energy versus the similarity metric. The optimal chosen phase highlighted by a red circle. The bottom panels (d-f) present the corresponding simulated XRD profiles of the optimal structures (red profile) compared with the experimental patterns of phase (black filled profiles). Distortion of the La-sublattice in the -LaH may be reduced by proper SSCHA relaxation.
Optimal candidates from our structural screening based on the tradeoff between enthalpy and the similarity metric cluster tightly, well separated from the rest of generated structures (Figure 1a, Figure 1b, Figure 1c). Notably, repeating the 150 GPa structure search by comparing a constrained regime, where both La positions and cell shape were fixed, against a fully unconstrained structural relaxation alters the potential energy landscape but consistently converges on the identical motif as the best-scoring solution for (see Figures S1 b, c, e, f in the Supplementary Information). We consider this convergence and clear separation as the evidence that the structure is a reproducible hydrogen-ordering motif, intrinsic to the LaH system and not a computational artifact. Specifically, these optimal candidates relax into the phase -LaH, whose La-sublattice is slightly distorted compared to phase . In contrast to the structures mentioned ScH and LuH Jiang et al. [ [15], where hydrogen atoms form pseudo-molecules that typically host strong electron-phonon coupling, the phase relaxes into a hydride with a true molecular hydrogen sublattice. Due to the presence of molecular units H that localize electrons, the superconducting properties of the phase are expected to be lower.
To investigate the experimentally observed hexagonal LaH Semenok et al. [ [29], EnvXGen searches were performed within the La sublattice related to the space group using a minimal simulation cell with two La atoms ().
These searches converge toward the pseudo-hexagonal structure - as the most promising candidate (see Figures S1 (a, d) in the Supplementary Materials). In contrast to the cubic-derived molecular phase , the - possesses a dense distorted network of hydrogen bonds. Such an extended atomic-like hydrogen motif may lead to strong electron-phonon coupling, proposing a better candidate to explain the high possibly observed experimentally in lanthanum polyhydrides .
Detailed analysis of the simulated XRD patterns reveals a distinct structural deviation of the relaxed phase from the initial -. The ordered network of molecules exerts an anisotropic local crystal field on the La atoms, forcing them to displace from their high-symmetry positions. This symmetry breaking leads to a splitting of the 110 XRD peak, as clearly visible in Figure 1d, Figure 1e, Figure 1f. While this distortion lowers the potential energy, the subsequent SSCHA analysis will demonstrate that incorporating strong anharmonicity and quantum zero-point motion stabilizes both the distorted and undistorted structures. This indicates that quantum fluctuations are sufficient to dynamically average the orientations of the molecules, thereby restoring the highly symmetric lanthanum sublattice in this configuration.
For the optimal phase - (see Figure 2a, Figure 2b) the orbital decomposition at the Fermi level yields La, H, La, and La. The computationally obtained metallicity distinguishes our candidates from the very first experimental synthesis of lanthanum dodecahydrides, where a sample of higher hydrogen content (assigned to ) was described as an insulator Drozdov et al. [ [10]. The predicted metallic character and La–H hybridization are consistent with the possible experimental observation of the onset of superconductivity in samples Semenok et al. [ [29]. Contactless radio-frequency (RF) transmission measurements indicate a (onset) up to 280 K at 165 GPa in the magnetic field Semenok et al. [ [29].
Figure 2. Electronic band structure, partial DOS and orbital contribution for the (a, b) – and (c, d) – phases at 150 GPa. All considered candidates are metals under pressure of interest.
However, attributing this high exclusively to the derived phase - is problematic, as the survival of molecules localizes electrons, decreasing the superconducting temperature. High-pressure polyhydride synthesis yields multiphase mixtures, strongly dependent on local kinetic pathways, thermodynamic conditions and, indeed, experimental transport studies explicitly note that such samples are often mixed phases containing multiple components Somayazulu et al. [ [31]. Driven by the experimental detection of a hexagonal sublattice at 165 GPa Semenok et al. [ [29], we assume that the measured high- signal may originate from the constituent hexagonal phase. Our electronic structure calculations for the corresponding pseudohexagonal phase - confirm a metallic state (see Figure 2c, Figure 2d), where the orbital decomposition at the Fermi level yields La, H, La, and La.
To further expand our search space, an unconstrained evolutionary algorithm using USPEX coupled with the machine-learned MatterSim potential Glass et al. [ [14], Jiang et al. [ [15], Yang et al. [ [34] was executed to sample the stoichiometries of , and . This global search independently identified phase - and - at 150 GPa as candidates with low enthalpy (see Figures S2 in the Supplementary Information). The generation of the structures at 150 GPa was provided with a lanthanum atom range of 1 to 4 in the unit cell that led to the phase - (see Figures S3 in the Supplementary Information), while successfully recovering previously known structural end-members. However, none of these structures correspond to experimentally observed XRD patterns. Furthermore, previously reported high-symmetry structure - Jiang et al. [ [15] was used for direct chemical substitution (Sc La), transforming this configuration into a phase - at 150 GPa, to obtain another independent candidate for our comparative analysis. Electronic band structures and total/projected DOS confirm that the identified candidates - and - are metallic at 150 GPa (see Figures S4 in the Supplementary Information), with multiple dispersive bands crossing the Fermi level.
To evaluate thermodynamic stability, we constructed the formation enthalpy convex hull over the entire La–H system (incorporating -La, -, -, -, -, - and -(-H) at 150 GPa with ZPE corrections (see Figure 3a). It should be noted that the thermodynamic instability of the stoichiometry relative to the –H tie-line has been previously reported in early theoretical investigations Liu et al. [ [21]. The high-symmetry phase - with pseudomolecules lies meV/atom above the convex hull, and the phase -, found by fixcomp USPEX search, lies meV/atom above the convex hull. Candidates - and - derived from the experimental lattice are located at meV/atom ( meV/atom without ZPE, as shown in Figure 3c) and meV/atom above the convex hull, respectively. Furthermore, elevating the temperature does not stabilize this structure: the enthalpy distance of the phase - from the convex hull increases to meV/atom at 500 K and to meV/atom at 1500 K (Figure 3b). We propose that bridging this thermodynamic gap requires moving beyond simple idealized unit cells with , 2 to supercells with larger . The synthesized material may be stabilized by factors currently omitted from standard optimizations, such as exploring substantially larger supercells (e.g., LaH → LaH → LaH) to capture degenerate hydrogen orderings, non-stoichiometric compositions (e.g., LaH to LaH), extended defects in the hydrogen sublattice, or even extrinsic stabilization driven by light-element impurities (Ga, C, N, O, ...) which present in high pressure chamber. However, such an expansive compositional search increases the configurational degrees of freedom, rendering it beyond the scope of this study. Nevertheless, this deviation underscores that our theoretical and phases serve as a first-order approximations of the complex experimental structure. Our work shows that found LaH structures are dynamically stable metals, have XRD patterns and unit cell parameters close to experimental ones, and are superconductors. The relatively low s and thermodynamic stability are drawbacks of the proposed candidates.

Figure 3. Thermodynamic convex hulls of the La-H system at 150 GPa. (a) Convex hull (with ZPE) showing the formation enthalpies per atom. The zoomed-in right panel highlights the precise energy distances above the convex hull for the key metastable phases of LaH: , , , and . (b) Temperature dependence of the convex hull at 0 K (blue), 500 K (green), and 1500 K (red) highlighted for phase on the right panel. (c) Effect of ZPE corrections on the thermodynamic stability at 0 K highlighted for phase on the right panel.
The standard harmonic approximation fails to describe the lattice dynamics of hydrogen-dense polyhydrides due to the quantum effects of hydrogen atoms. Our calculations reveal imaginary modes in the harmonic phonon dispersions for LaH (over symmetry groups of , , , and shown in Figures S5 of the Supplementary Information), concentrated in the low-frequency spectral region dominated by La displacements and hydrogen translational motions. This behavior mirrors the well-documented physics of -LaH, where harmonic calculations predict structural distortion Errea et al. [ [11], but the inclusion of quantum effects reveals a high-symmetry structure that has become the true ground state Er-
rea et al. [2020]. For these reasons, we take into account quantum fluctuations by applying the SSCHA method to evaluate the dynamical stability of the candidates obtained (Figures 4a, c), which optimally reproduce the experimentally observed phases Semenok et al. [ [29]. The calculated phonon dispersion relations and the corresponding phonon DOS are presented in Figures 4b, d. While the harmonic approximation exhibits dynamical instabilities, the anharmonic phonon spectra derived from the SSCHA method demonstrate hardening of the acoustic and optical branches, eliminating all imaginary modes. This confirms that quantum fluctuations dynamically stabilize both -LaH and -LaH phases at the pressure range 100–200 GPa (see Figure S7 and Table S1 in the Supplementary Information). Notably, the potential energy favors the distorted structure of the phase -LaH by 15 meV/atom (see Figures S1b, c, e, f in the Supplementary Information), but the inclusion of anharmonicity stabilizes the distorted structure (see Figure S6 in the Supplementary Information) with the close difference of Helmholtz free energy 1.4 meV/atom lower compared to its undistorted counterpart.
Figure 4. Phonon band structures and superconducting properties of LaH. (a, c) Crystal structures of the -LaH (148 GPa) and -LaH (153 GPa) metastable phases, respectively. Anharmonic pressures differ from the initial harmonic pressures. (b, d) Phonon dispersions and DOS, where black dashed lines represent the harmonic approximation (DFPT) and red solid lines denote the anharmonic phonon spectra obtained via the SSCHA method. Eliashberg spectral function and the electron-phonon coupling constant are represented by red solid lines and blue dashed lines, respectively, for both phases.
Furthermore, we evaluated both Eliashberg spectral functions (Figures 4b, d) and the corresponding EPC parameters, ensuring strict convergence with respect to the electronic smearing parameter (see Figures S9 and S10 in the Supplementary Information). The calculated EPC constant (), logarithmic average frequency (), and estimated superconducting transition temperature () are summarized in Table 1. The primary contribution to the EPC in the phase -LaH originates from low-frequency vibrations associated with the heavy La atoms. As noted previously, the presence of H molecules suppresses the overall superconducting properties, yielding very low = 11 meV, , and formal K. In contrast, the phase C2221-LaH exhibits a robust EPC (with and meV), driven by contributions from mid- to high-frequency modes of the hydrogen clathrate network, resulting in an elevated K. Using recent empirical analyses that established a theoretical upper bound for high-pressure hydrides Chen and Yildirim [ [6], we computed this integral parameter for our structures. The phase R yields a substantial THz, where is theoretically bounded up to K, while the phase C2221 yields THz, approaching closely the optimal boundary of K near position of HS on the vs plot.
| Structure | (meV) | (THz) | (K) | (K) | |
| R-LaH | 2.91 | 11.0 | 680 | 30 | 125 |
| C2221-LaH | 1.83 | 87.5 | 886 | 150 | 170 |
Table 1. The EPC parameters of the studied phase modifications of LaH. The table summarizes the electron-phonon coupling parameter (), logarithmically averaged frequency (), integral first-order moment of , the Allen-Dynes superconducting transition temperature (), and the theoretical upper bound .
Returning to the case of R-LaH at 150 GPa and its unrealistically soft phonon modes, we were interested in investigating what would happen if these soft phonon modes were suppressed or removed using a suitable smoothing function that preserves the form in the vicinity of zero phonon energy (for example, formula S1 in Supplementary Information). Simple estimates show that suppression the soft phonon modes greatly increase and of R-LaH to nearly 100 K, in agreement with estimates based on (Supplementary Figure S12).
To further investigate the structural nature of synthesized polyhydrides, we compared theoretical anharmonic equations of state (EoS) with experimental data obtained during decompression cycles in Ref. Semenok et al. [ [29] (Figure 5). It is evident that the high-symmetry phase R-LaH overestimates the unit cell volume per La atom over the entire pressure range. This suggests that this low-density phase is unlikely to be synthesized at high pressure. However, the phase C2221-LaH exhibits a more dense structural packing and brings the theoretical prediction closer to the experimental observations. Furthermore, the experimental EoS exhibits a deviation from the predicted EoS as the pressure decreases below GPa (indicated by the dashed vertical line in Figure 5), where the experimental cell volumes deviate even further from the extrapolated LaH trend. This volume decrease relative to that expected from the equation of state is a signature of pressure-induced continuous hydrogen loss that leads to a transition from the stoichiometry of LaH to a hydrogen-deficient phase LaH.
Figure 5. Equations of state for the LaH and LaH phases. The solid orange line represents the theoretical EoS for the R-LaH phase, while the blue line is for the C2221-LaH phase at 150 GPa. Experimental data points obtained from Ref. Semenok et al. [ [29] during decompression cycles in LaH are denoted by red circles and grey squares. (a) A qualitative change in the diffraction patterns of a mixture of Pm and -LaH during decompression in the range from 89 to 81 GPa. A significant broadening of the diffraction peaks can be observed, caused by the fracturing of sample’s crystallites due to a possible phase transition. (c) Evolution of LaH diffraction patterns during decompression in the form of an intensity heatmap. A sharp change in the position and width of the diffraction peaks in the 89–81 GPa range, caused by a sharp increase in the unit cell volume.
Indeed, in the experiment with LaH in Ref. Semenok et al. [ [29], we observed a similar sharp structural transition and change in the character of the diffraction rings, but at a lower pressure: between 89 and 81 GPa (Figure 5b, Figure 5c). In this range, the narrow diffraction rings and point diffraction reflections from micron- and submicron-sized crystals of the Pm phase broaden and acquire a diffuse character (Figure 5b). The same is observed for the diffraction bands of the hexagonal phase (* in Figure 5c). At the same time, a sharp increase in the unit cell volume is observed (Figure 5c), which may indicate a rearrangement of the hydrogen sublattice in this pressure range.
Conclusion
In summary, we have addressed the problem of resolving the hydrogen sublattice in LaH phases under megabar pressures. The implementation of the EnvXGen algorithm and similarity metric enabled the search of R-LaH and C2221-LaH phases that are in acceptable agreement with the experimental diffraction patterns. The generated structures are thermodynamically metastable metals that lie above the La-H convex hull, but their calculated equations of state capture both the pressure-dependent unit-cell volumes and the possible LaH LaH evolution due to hydrogen loss, observed experimentally during the decompression of LaH. Quantum zero-point fluctuations dynamically stabilize both the R-LaH and C2221-LaH phases while preserving the structural match with the experimental XRD profiles.
R-LaH structure hosts a highly elevated electron-phonon coupling constant (), driven by soft phonons that suppress the effective logarithmic frequency ( meV), limiting its critical temperature to K. Suppressing these soft phonon modes can cause to rise up to K. In contrast, C2221-LaH features a dense atomic-like hydrogen clathrate network that maintains a strong coupling (), provides high-frequency hydrogen vibrations ( meV) and results in higher K. It is expected that increasing the size of the supercell () to identify the most favorable hydrogen sublattices, including hydrogen defects and non-stoichiometric compositions, and accounting for the influence of impurities, could significantly improve the agreement between theoretical calculations and experimental data.
Acknowledgements
D.V.S. and D.Z. would like to express their gratitude to the National Natural Science Foundation of China (NSFC), Research Fund for International Excellent Young Scientists, grant number W2632008, for the financial support. D.V.S., D.Z., V.V.S. thank the NSFC International Collaboration Fund for Creative Research Teams, grant No. W2641002, for financial support. This work was supported by the National Key Research and Development Program of China (grant 2023YFA1608900, subproject 2023YFA1608903). V.V.S. acknowledges financial support from the Shanghai Science and Technology Committee, China (No. 22JC1410300) and Shanghai Key Laboratory of Materials Frontier Research in Extreme Environments (MFree), China (No. 22dz2260800).
Author contributions
K. A.: conceptualization; methodology; investigation; formal analysis; writing – original draft; D.V.S.: conceptualization; methodology; investigation; formal analysis; writing; conceptualization; methodology; investigation; formal analysis; writing; supervision. D.Z.: investigation; funding acquisition. V.V.S.: conceptualization; supervision; funding acquisition; writing - review and editing. A.G.K.: supervision; funding acquisition; writing - review and editing. All authors discussed the results and approved the final manuscript.
Data availability
The authors declare that the main data supporting findings of this study are contained within the paper and the Supporting Information. Data are available from the corresponding author upon reasonable request.
Competing interests
The authors declare no conflicts of interest.
References
- [1]Allen, P., Dynes, R., 1975. Transition temperature of strong-coupled superconductors reanalyzed. Physical Review B 12, 905.DOI
- [2]Aslandukova, A., Aslandukov, A., Laniel, D., Yin, Y., Akbar, F., Bykov, M., Fedotenko, T., Glazyrin, K., Pakhomova, A., Garbarino, G., Bright, E., 2024. Diverse high-pressure chemistry in y-nh3bh3 and y–paraffin oil systems. Science advances 10, ead15416.
- [3]Bianco, R., Errea, I., Paulatto, L., Calandra, M., Mauri, F., 2017. Second-order structural phase transitions, free energy curvature, and temperature-dependent anharmonic phonons in the self-consistent harmonic approximation: Theory and stochastic implementation. Physical Review B 96, 014111.DOI
- [4]Blöchl, P.E., 1994. Projector augmented-wave method. Physical Review B 50, 17953.pubmed.ncbi.nlm.nih.gov/9976227
- [5]Boehler, R., Molaison, J., Haberl, B., 2017. Novel diamond cells for neutron diffraction using multi-carat cvd anvils. Review of Scientific Instruments 88.DOI
- [6]Chen, T., Yildirim, T., 2026. Periodic trends and a physics-based multistage search for high-t_c hydride superconductors. arXiv preprint arXiv:2609.35582 .arxiv.org/abs/2609.35582
- [8]Clay III, R., Mcminis, J., McMahon, J., Pierleoni, C., Ceperley, D., Morales, M., 2014. Benchmarking exchange-correlation functionals for hydrogen at high pressures using quantum monte carlo. Physical Review B 89, 184106.DOI
- [9]Drozdov, A., Eremets, M., Troyan, I., Ksenofontov, V., Shylin, S., 2015. Conventional superconductivity at 203 kelvin at high pressures in the sulfur hydride system. Nature 525, 73–76.DOI
- [10]Drozdov, A., Kong, P., Minkov, V., Besedin, S., Kuzovnikov, M., Mozaffari, S., Balicas, L., Balakirev, F., Graf, D., Prakapenka, V., Greenberg, E., 2019. Superconductivity at 250 k in lanthanum hydride under high pressures. Nature 569, 528–531.
- [11]Errea, I., Belli, F., Monacelli, L., Sanna, A., Koretsune, T., Tadano, T., Bianco, R., Calandra, M., Arita, R., Mauri, F., Flores-Livas, J., 2020. Quantum crystal structure in the 250-kelvin superconducting lanthanum hydride. Nature 578, 66–69.DOI
- [12]Errea, I., Calandra, M., Mauri, F., 2014. Anharmonic free energies and phonon dispersions from the stochastic self-consistent harmonic approximation: Application to platinum and palladium hydrides. Physical Review B 89, 064302.DOI
- [13]Giannozzi, P., Andreussi, O., Brumme, T., Bunau, O., Buongiorno Nardelli, M., Calandra, M., Car, R., Cavazzoni, C., Ceresoli, D., Cococcioni, M., Colonna, N., 2017. Advanced capabilities for materials modelling with quantum espresso. Journal of physics: Condensed matter 29, 465901.
- [14]Glass, C., Oganov, A., Hansen, N., 2006. Uspex—evolutionary crystal structure prediction. Computer physics communications 175, 713–720.
- [15]Jiang, Q., Duan, D., Song, H., Zhang, Z., Huo, Z., Jiang, S., Cui, T., Yao, Y., 2024. Prediction of room-temperature superconductivity in quasi-atomic h2-type hydrides at high pressure. Advanced Science 11, 2405561.DOI
- [16]Kresse, G., Furthmüller, J., 1996a. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Computational materials science 6, 15–50.DOI
- [18]Kresse, G., Hafner, J., 1993. Ab initio molecular dynamics for liquid metals. Physical review B 47, 558.
- [19]Kresse, G., Hafner, J., 1994. Ab initio molecular-dynamics simulation of the liquid-metal–amorphous-semiconductor transition in germanium. Physical Review B 49, 14251.pubmed.ncbi.nlm.nih.gov/10010505
- [20]Laniel, D., Winkler, B., Bykova, E., Fedotenko, T., Chariton, S., Milman, V., Bykov, M., Prakapenka, V., Dubrovinsky, L., Dubrovinskaia, N., 2020. Novel sulfur hydrides synthesized at extreme conditions. Physical Review B 102, 134109.DOI
- [21]Liu, H., Naumov, I., Hoffmann, R., Ashcroft, N., Hemley, R., 2017. Potential high-tc superconducting lanthanum and yttrium hydrides at high pressure. Proceedings of the National Academy of Sciences 114, 6990–6995.DOI
- [22]Monacelli, L., Bianco, R., Cherubini, M., Calandra, M., Errea, I., Mauri, F., 2021. The stochastic self-consistent harmonic approximation: calculating vibrational properties of materials with full quantum and anharmonic effects. Journal of Physics: Condensed Matter 33, 363001.DOI
- [23]Monacelli, L., Errea, I., Calandra, M., Mauri, F., 2018. Pressure and stress tensor of complex anharmonic crystals within the stochastic self-consistent harmonic approximation. Physical Review B 98, 024106.DOI
- [24]Monkhorst, H.J., Pack, J.D., 1976. Special points for brillouin-zone integrations. Physical Review B 13, 5188.DOI
- [25]Oganov, A., Ma, Y., Lyakhov, A., Valle, M., Gatti, C., 2010. Evolutionary crystal structure prediction as a method for the discovery of minerals and materials. Reviews in Mineralogy and Geochemistry 71, 271–298.DOI
- [26]Patel, P., Dalsaniya, M., Patel, S., Kurzydłowski, D., Kurzydłowski, K., Jha, P., 2026. Revisiting the high-pressure phase transitions of yttrium: Insights from density functional theory. Physical Review B 113, 184108.DOI
- [27]Perdew, J.P., Burke, K., Ernzerhof, M., 1996. Generalized gradient approximation made simple. Physical review letters 77, 3865.pubmed.ncbi.nlm.nih.gov/10062328
- [28]Propad, Y., Kruglov, I., 2026. Envxgen: A crystal structure predictor with fixed environment. The Journal of Physical Chemistry C 130, 6831–6840.DOI
- [29]Semenok, D., Bärtl, F., Zhou, D., Helm, T., Luther, S., Wosnitza, J., Troyan, I., Struzhkin, V., Kühne, H., 2026. Transmission of radio-frequency waves and nuclear magnetic resonance in lanthanum superhydrides. Advanced Science 13, 20701.DOI
- [30]Somayazulu, M., Ahart, M., Mishra, A., Geballe, Z., Baldini, M., Meng, Y., Struzhkin, V., Hemley, R., 2019a. Evidence for superconductivity above 260 k in lanthanum superhydride at megabar pressures. Physical review letters 122, 027001.DOI
- [31]Somayazulu, M., Ahart, M., Mishra, A., Geballe, Z., Baldini, M., Meng, Y., Struzhkin, V., Hemley, R., 2019b. Evidence for superconductivity above 260 k in lanthanum superhydride at megabar pressures. Physical review letters 122, 027001.DOI
- [32]Togo, A., 2023. First-principles phonon calculations with phonopy and phono3py. Journal of the Physical Society of Japan 92, 012001.DOI
- [33]Togo, A., Tanaka, I., 2015. First principles phonon calculations in materials science. Scripta materialia 108, 1–5.arxiv.org/abs/1506.08498
- [34]Yang, H., Hu, C., Zhou, Y., Liu, X., Shi, Y., Li, J., Li, G., Chen, Z., Chen, S., Zeni, C., Horton, M., 2024. Mattersim: A deep learning atomistic model across elements, temperatures and pressures. arXiv preprint arXiv , 2405.04967.arxiv.org/abs/2405.04967
- [35]Zurek, E., Grochala, W., 2015. Predicting crystal structures and properties of matter under extreme conditions via quantum mechanics: the pressure is on. Physical Chemistry Chemical Physics 17, 2917–2934.DOI



