betaFeedback

WorksPhysics and Astronomy

Ferroelectrically Switchable Half-Quantized Hall Effect

Abstract

Integrating ferroelectricity, antiferromagnetism, and topological quantum transport within a single material is rare, but crucial for developing next-generation quantum devices. Here, we propose a multiferroic heterostructure consisting of an antiferromagnetic MnBi2_2Te4_4 bilayer and an Sb2_2Te3_3 film is able to harbor the half-quantized Hall (HQH) effect with a ferroelectrically switchable Hall conductivity of e2/2he^2/2h. We first show that, in the energetically stable configuration, the antiferromagnetic MnBi2_2Te4_4 bilayer opens a gap in the top surface bands of Sb2_2Te3_3 through proximity effect, while its bottom surface bands remain gapless; consequently, HQH conductivity of e2/2he^2/2h can be sustained clockwise or counterclockwise depending on antiferromagnetic configuration of the MnBi2_2Te4_4. Remarkably, when applying interlayer sliding within the MnBi2_2Te4_4 bilayer, its electric polarization direction associated with parity-time reversal symmetry breaking is reversed, accompanied by a reversal of the HQH conductivity. The proposed approach offers a powerful route to control topological quantum transport in antiferromagnetic materials by ferroelectricity.

Over the past decades, there have been rapid developments in two important areas of condensed matter physics, namely, quantum anomalous Hall effects1–5 and ferroelectricity[8, 9] [6, 7], wherein symmetry breaking plays an integral part in the emergence of different quantum states[10]. The former, a fundamental transport phenomenon characterized by either integer[11, 12, 13, 14] [2, 3] or half-integer[15, 16, 17, 18, 19, 20] quantum Hall conductance in multiples of e2/he^{2}/h (where ee is the electron charge and hh is Planck's constant), arises from time-reversal symmetry (T^\hat{T}) breaking, while the latter results from inversion symmetry (P^\hat{P}) breaking, leading to spontaneous polarization[21]. Notably, unlike the integer quantum anomalous Hall effect in insulating phases, semi-magnetic topological insulators with a single gapless Dirac cone exhibit a half-integer quantized Hall conductivity, accompanied by a non-zero longitudinal resistance[16]. Recently, the broken P^\hat{P} symmetry in ferroelectric topological insulators has been actively explored, as it combines switchable polarization with robust topological surface states[22, 23, 24, 25], opening new avenues for designing innovative functional devices. The simultaneous breaking of both T^\hat{T} and P^\hat{P} symmetries may lead to even more exotic phenomena than breaking either T^\hat{T} or P^\hat{P} symmetry alone[26]. In particular, ferroelectrically switchable and topologically protected edge states in a quantum regime may pave the way for developing next-generation quantum devices with high fault tolerance[27].

Recently, MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} has attracted significant attention as an intrinsic magnetic topological insulator with antiferromagnetic interlayer coupling, where the spins of the magnetic elements are ferromagnetically aligned within the abab plane[28, 29, 30, 31]. Consequently, the total magnetization depends on the film thickness, with films containing odd numbers of layers exhibiting the integer quantum anomalous Hall state[32], while those containing even number of layers exhibiting zero net magnetization and no anomalous Hall conductivity[33]. Here, the existence or absence of the quantum anomalous Hall effect can again be simply formulated based on symmetry arguments. Such a symmetry approach has recently led to the discovery of an asymmetric Hall response in the even layers of MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4}, driven by P^T^\hat{P}\hat{T} symmetry breaking through external electric fields[34] or by intrinsic ferroelectricity via layertronic sliding[35], countering the conventional wisdom that the anomalous Hall effect is tied to net magnetization. In particular, the demonstration of the electrical switching ability of the Hall conductance is not only a rare achievement due to conflicting symmetry requirements but also holds great promise for next-generation high-performance antiferromagnetic spintronic devices. However, to fully realize the application potentials, it is crucial to go beyond the existing paradigm that primarily focuses on insulating phases by exploring alternative routes to achieve nonvolatile switching of the quantized Hall conductivity.

In this Letter, by going beyond the existing recipe in ferromagnetic systems[16, 36], we propose a multiferroic MnBi2Te4/Sb2Te3\mathrm{MnBi}_{2}\mathrm{Te}_{4}/\mathrm{Sb}_{2}\mathrm{Te}_{3} heterostructure with both antiferromagnetic and ferroelectric orders as an ideal platform for realizing the half-quantized Hall (HQH) conductivity with versatile tunability. We first show that, in the energetically stable configuration, the antiferromagnetic MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} bilayer opens a gap in the top surface bands of Sb2Te3\mathrm{Sb}_{2}\mathrm{Te}_{3} through proximity effect, while its bottom surface bands remain gapless; consequently, a HQH conductivity of e2/2he^{2}/2h can be sustained clockwise or counterclockwise depending on the initial antiferromagnetic configuration of the MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} bilayer. More strikingly, when applying a relative interlayer sliding within the MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} bilayer, its electric polarization direction associated with the P^T^\hat{P}\hat{T} symmetry breaking is reversed, accompanied by a reversal of the HQH conductivity as well. The proposed approach offers a powerful route to control topological quantum transport in antiferromagnetic materials by ferroelectricity, with appealing technological potentials.

First-principles calculations were performed using the projector-augmented wave method[37], implemented in the VASP code[38]. The Perdew-Burke-Ernzerhof approximation was used to describe the exchange-correlation functional[39]. To treat the localized 3d3d orbitals of Mn atoms in our proposed heterostructure, the (GGA)+UU method[40] was employed, with the Ueff=4.0U_{\mathrm{eff}}=4.0 eV, as suggested in Ref.[41]. Anomalous Hall conductivity was calculated using the WannierTools package[42] in conjunction with the Wannier90[43]. More computational details, along with the relevant references[37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50], are given in the Supporting Information.

Tetradymite-type MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} forms a rhombohedral layered structure, similar to typical three-dimensional topological insulators (TIs) such as Bi2Te3\mathrm{Bi}_{2}\mathrm{Te}_{3}, and belongs to the R3mR3m space group (No. 166)[29]. Its basic building block is a septuple layer (SL), stacked in the sequence Te-Bi-Te-Mn-Te-Bi-Te (see Figure 1(a)). Within each SL, a long-range ferromagnetic is established, while adjacent SLs exhibit antiferromagnetic coupling, with a Néel temperature (TNT_{\mathrm{N}}) of 24 K[51]. Due to the inherent P^T^\hat{P}\hat{T} symmetry, a film with an even number of layers of MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} in an antiferromagnetic order is centrosymmetric. However, breaking space inversion symmetry could potentially lead to the emergence of ferroelectricity[8, 9] [7]. In doing so, we first consider anti-AA stacking of an isolated MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} bilayer by rotating the top layer 180° relative to the bottom layer to break the inversion symmetry of the system, as shown in Figure S1. Such a stacking has been demonstrated in various hexagonal 2D materials, including MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4}[8, 35, 50, 52] [7]. Moreover, by further performing a lateral interlayer translation operation on the top layer of the anti-AA stacking with ±t∥\pm\mathbf{t}_{\parallel} (where t∥=[1/3,−1/3]\mathbf{t}_{\parallel} = [1/3, -1/3] in fractional coordinates, as shown in Figure S1), two additional stacking configurations, namely anti-AB and anti-AC, can be obtained. Such inversion symmetry-broken configurations are energetically stable, while the anti-AA configuration is metastable due to the proximity of Te atoms across the interface[35]. We then stack anti-AB and anti-AC configurations of MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} bilayers on thick Sb2Te3\mathrm{Sb}_{2}\mathrm{Te}_{3} to form semi-magnetic TIs, as shown in Figure 1(a). Our total energy calculations reveal that both the anti-AB and anti-AC based heterostructures are energetically nearly degenerate, exhibiting a camel-back feature in the total energy between the two states (see Figure 1(b)) that potentially signifies the emergence of ferroelectricity. The calculated binding energy for the anti-AB heterostructure is −27.01-27.01 meV/Å2^{2}, comparable to that of typical vdW heterostructures[53]. Here, the binding energy is defined as Eb=Etotal−EMBT−ESTE_{\mathrm{b}} = E_{\mathrm{total}} - E_{\mathrm{MBT}} - E_{\mathrm{ST}}, with EtotalE_{\mathrm{total}}, EMBTE_{\mathrm{MBT}}, and ESTE_{\mathrm{ST}} being the total energies of the heterostructure, freestanding bilayer MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4}, and freestanding five quintuple layers (QLs) of Sb2Te3\mathrm{Sb}_{2}\mathrm{Te}_{3}, respectively.

Image not extracted

Figure 1. (a) Atomic structures of the two switchable ferroelectric states in the MnBi2Te4/Sb2Te3\mathrm{MnBi}_{2}\mathrm{Te}_{4}/\mathrm{Sb}_{2}\mathrm{Te}_{3} heterostructure, along with the ferroelectric switching mechanism. In the

two central columns, a schematic illustration is shown between the density distribution of the gapped surface states (as represented by the red lines within the crystals) and the tunability of the parity anomaly of the gapless Dirac cone at the bottom surface. The Mn 3d3d atoms are labeled in red, with opposite spin directions indicated by the magenta arrows and opposite polarizations shown by the black arrows. (b) Energy profile and (c) variation in the out-of-plane electric polarization during the ferroelectric switching of the MnBi2Te4/Sb2Te3\mathrm{MnBi}_{2}\mathrm{Te}_{4}/\mathrm{Sb}_{2}\mathrm{Te}_{3} heterostructure.

Next, to quantify the spontaneous polarizations (PP) in the two stacking heterostructures, we employ the Berry phase approach[54] and the ferroelectric switching pathway is determined via the nudged elastic band (NEB) method[55]. We find that the anti-AB and anti-AC heterostructures exhibit relatively high PP values of -3.08 pC/m and 2.03 pC/m, respectively, and the energy barrier between them is 61 meV per unit cell (u.c.) (see Figure 1(b)). This barrier is higher than that of isolated MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} bilayers (31 meV/u.c.) but still lower than or comparable to that of well-established 2D ferroelectric materials such as In2Se3\mathrm{In}_{2}\mathrm{Se}_{3} (66 meV/u.c.)[56]. Thus, MnBi2Te4/Sb2Te3\mathrm{MnBi}_{2}\mathrm{Te}_{4}/\mathrm{Sb}_{2}\mathrm{Te}_{3} semi-magnetic TI exhibits robust ferroelectricity with switchable out-of-plane polarization, making it ideal for low-energy, non-volatile switching and memory devices.

Now we discuss the magnetic properties during ferroelectric polarization reversal due to magnetoelectric coupling in the MnBi2Te4/Sb2Te3\mathrm{MnBi}_{2}\mathrm{Te}_{4}/\mathrm{Sb}_{2}\mathrm{Te}_{3} heterostructure. As shown in Figure 1(b,Figure 1c) and Figure S2, all the stacking configurations of the MnBi2Te4/Sb2Te3\mathrm{MnBi}_{2}\mathrm{Te}_{4}/\mathrm{Sb}_{2}\mathrm{Te}_{3} heterostructure along the kinetic pathway prefer out-of-plane antiferromagnetic ground state. Moreover, compared to the freestanding MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} bilayer (0.24 meV per Mn atom), the MnBi2Te4/Sb2Te3\mathrm{MnBi}_{2}\mathrm{Te}_{4}/\mathrm{Sb}_{2}\mathrm{Te}_{3} heterostructure exhibits enhanced magnetic anisotropy, increasing to 0.33 meV and 0.39 meV per Mn atom for the anti-AB and anti-AC stackings, respectively. Typically, the magnetic ordering temperature of a material is closely related to its magnetic anisotropy, with a higher anisotropy leading to higher Curie or Néel temperature[57]. To confirm this conjecture, we have performed Monte Carlo simulations to estimate TNT_{\mathrm{N}} for the anti-AB (P↓M↑↓\mathrm{P}_{\downarrow}\mathrm{M}_{\uparrow\downarrow}) configuration of the MnBi2Te4/Sb2Te3\mathrm{MnBi}_{2}\mathrm{Te}_{4}/\mathrm{Sb}_{2}\mathrm{Te}_{3} heterostructure as a specific example (for details, see Section S1). Using the DFT-derived exchange interactions JJ and magnetic anisotropy energy (EMAEE_{\mathrm{MAE}}), the estimated TNT_{\mathrm{N}} for the anti-AB (P↓M↑↓\mathrm{P}_{\downarrow}\mathrm{M}_{\uparrow\downarrow}) configuration is 38.7 K (see Figure S3), which is higher than that of an isolated MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} bilayer, given by 24 K[58].

Next, we turn our attention to the electronic structure and quantum transport properties of the two switchable states of the MnBi2_2Te4_4/Sb2_2Te3_3 heterostructure. The Sb2_2Te3_3 film possesses two gapless surface Dirac cones, and their mutual coupling is critically dependent on the film thickness[59]. To crosscheck that the 5-QL film of Sb2_2Te3_3 is thick enough, we project the wave functions of the topmost or bottommost QL onto the band structure, as shown in Figure S4. We see that the topologically nontrivial surface states cross the Fermi level, indicating sufficient film thickness to decouple the top and bottom surface states. Upon depositing the bilayer MnBi2_2Te4_4 on top of Sb2_2Te3_3, the exchange interaction between the surface electrons of the TI and magnetic elements in the MnBi2_2Te4_4 induces an energy gap (Δ\Delta) in the top-surface Dirac cone of the TI while the bottom surface Dirac cone remain gapless, as shown in Figure 2(a,Figure 2b). To distinguish between the two switchable states of anti-AB (P↓\downarrowM↑↓\uparrow\downarrow) and anti-AC (P↑\uparrowM↑↓\uparrow\downarrow), we calculate the spin-dependent band structures with spin-orbit coupling, as shown in Figure 2(c,Figure 2d). Remarkably, both configurations exhibit a spin-dependent magnetic gap around the Γ\Gamma point, which varies upon reversing the direction of the electric polarization. Furthermore, as the proposed heterostructure also exhibits net antiferromagnetic order, when the directions of the magnetic moments are flipped while keeping the polarization direction fixed, the sign of the magnetic gap changes as well, as shown in Figure S5. Such a spin-dependent magnetic gap can serve as a control parameter for the anomalous Hall conductivity, as confirmed later. The calculated magnetic gap for the anti-AB (P↓\downarrowM↑↓\uparrow\downarrow) and anti-AC (P↑\uparrowM↑↓\uparrow\downarrow) configurations is 16.2 meV and 8.4 meV, respectively, and these values are tunable through strain engineering, as also demonstrated for the anti-AB (P↓\downarrowM↑↓\uparrow\downarrow) configuration as an example (see Figure S6). Here it is noted that due to quantum confinement effect, a tiny gap appears below the Fermi level, and it decreases with the thicker Sb2_2Te3_3 layers; however, due to computational constraints, we restrict the analysis to up to 5-QLs.

Image not extracted

Figure 2. (a) Electronic structure and (b) zoomed-in views of the constituent band structures for the anti-AB (P↓M↑↓\mathrm{P}\downarrow\mathrm{M}\uparrow\downarrow) configuration of the MnBi2_2Te4_4/Sb2_2Te3_3 heterostructure. (c,d) Electronic structures (left panels) and HQH conductivities (right panels) as functions of energy for the two ferroelectrically switchable states of the MnBi2_2Te4_4/Sb2_2Te3_3 heterostructure, with the projected expectation value of the spin operator SzS_z also indicated by the spin bar.

The Hall conductivity at zero temperature can be calculated using the Kubo formula[60],

σH=−e2h∫BZdkxdky2πΩz(kx,ky).(1)\sigma_H=-\frac{e^2}{h}\int_{\mathrm{BZ}}\frac{d k_x d k_y}{2\pi}\Omega^z(k_x,k_y). \tag*{(1)}

Here the Berry curvature is defined as

Ωz(kx,ky)=−2Im⁡∑noccupied∑n′empty⟨Ψnk∣ℏvx∣Ψn′k⟩⟨Ψn′k∣ℏvy∣Ψnk⟩(εnk−εn′k)2,(2)\Omega^z(k_x,k_y)=-2\operatorname{Im}\sum_n^{\mathrm{occupied}}\sum_{n'}^{\mathrm{empty}}\frac{\langle\Psi_{nk}\rvert\hbar v_x\lvert\Psi_{n'k}\rangle\langle\Psi_{n'k}\rvert\hbar v_y\lvert\Psi_{nk}\rangle}{(\varepsilon_{nk}-\varepsilon_{n'k})^2}, \tag*{(2)}

where Ψnk\Psi_{nk} is the Bloch wave function with eigenvalues εnk\varepsilon_{nk} and vx(vy)v_x(v_y) is the velocity operator along the xx (yy) direction. The calculated Hall conductivities for the two switchable ferroelectric states of the MnBi2_2Te4_4/Sb2_2Te3_3 heterostructure are plotted in Figure 2(c,Figure 2d) where both configurations exhibit the HQH effect with a Hall conductance of magnitude e2/2he^2/2h within the magnetic gap. In sharp contrast, an isolated MnBi2_2Te4_4 bilayer is a trivial insulator with zero Hall conductivity due to its inherent P^T^\hat{P}\hat{T} symmetry (see Figure S9). The switchable HQH conductivity can be explained based on Berry curvature analyses, as presented in Figure 3. It can be seen that reversing the polarization direction from the anti-AC (P↑\uparrowM↑↓\uparrow\downarrow) to the anti-AB (P↓\downarrowM↑↓\uparrow\downarrow) state while keeping the magnetic moment directions fixed changes the sign of the Berry curvature around the Γ\Gamma point, leading to a switchable Hall conductivity from −e2/2h-e^2/2h to +e2/2h+e^2/2h. This controllable switching of the Berry curvature and the corresponding HQH conductivity through electric filed is not only experimentally feasible [34] but also highly desirable for device applications. These analyses show that switchable polarization and/or magnetization can be used as control parameters for realizing and manipulating the HQH effect.

Image not extracted

Figure 3. (a) Berry curvature distributions in the 2D Brillouin zone, and (b) along high-symmetry points, for the two ferroelectrically switchable states of the MnBi2Te4/Sb2Te3\mathrm{MnBi_2Te_4/Sb_2Te_3} heterostructure.

It is worth noting that, to realize HQH conductivity, an antiferromagnetic MnBi2Te4\mathrm{MnBi_2Te_4} bilayer serves as a prototypical example to open the energy gap in the top surface bands of Sb2Te3\mathrm{Sb_2Te_3}, while keeping the bottom surface bands gapless. This proposed approach for realizing HQH conductivity is conceptually generic and applicable to other related 2D semi-magnetic TIs composed of antiferromagnetic–nonmagnetic topological material combinations, provided the magnetization is strong enough to induce an energy gap in the top-surface bands of the TI while keeping the bottom-surface bands gapless (for details, see Section S3). As for MnBi2Te4\mathrm{MnBi_2Te_4}, it typically exhibits intrinsic antisite defects that may influence the energy gap in the top-surface bands of TI,[61] and several effective methods[51, 62], such as slower cooling and additional thermal annealing, are commonly employed to drive the system towards thermodynamic equilibrium during growth and promote the formation of high-quality, uniform single crystals.

In Figure 4(a,Figure 4b), we present the real-space charge density distributions of the upper-surface topological surface states at the Γ\Gamma point for both the anti-AB (P↓\downarrowM↑↓\uparrow\downarrow) and anti-AC (P↑\uparrowM↑↓\uparrow\downarrow) configurations of the MnBi2_2Te4_4/Sb2_2Te3_3 heterostructure. It can be seen that a large peak in the real-space charge density distribution primarily appears in the bottom layer of MnBi2_2Te4_4 for the anti-AC (P↑\uparrowM↑↓\uparrow\downarrow) configuration, namely, the MnBi2_2Te4_4 layer in proximity to the TI film. Upon reversing the polarization, the topological surface states of the TI in proximity with the MnBi2_2Te4_4 float up towards the top MnBi2_2Te4_4 layer. This floating behavior of the surface states leads to a strong interaction with the magnetism, resulting in a larger surface band gap observed in the anti-AB (P↓\downarrowM↑↓\uparrow\downarrow) configuration compared to the anti-AC (P↑\uparrowM↑↓\uparrow\downarrow).

Image not extracted

Figure 4. (a,b) Electron density distributions of the gapped topological surface states at the Γ\Gamma point for both polarizations, with the crystal structures shown in the insets. (c,d) Density distributions of the gapped surface states for both ferroelectric states and (e) HQH conductivity as a function of inter-layer coupling strength (δ\delta).

Going beyond first principles calculations, we employ a tight-binding lattice model to explore the impact of inter-layer coupling strength (δ\delta) on the Hall conductivity in our proposed heterostructure (for details, see Section S2). In Figure 4(c-Figure 4e), we present the calculated density distributions of the surface states and the Hall conductivity as a function of δ\delta, revealing a quantum phase transition characterized by a switchable Hall conductivity of ±e2/2h\pm e^{2}/2h. This quantum phase transition can be understood as the peak of the surface state density in the anti-AB (P↓M↑↓\mathrm{P}\downarrow\mathrm{M}\uparrow\downarrow) configuration is localized at the first MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} layer; while in the anti-AC (P↑M↑↓\mathrm{P}\uparrow\mathrm{M}\uparrow\downarrow) configuration, the peak shifts to the second MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} layer, consistent with our first-principles results. The sign of the magnetic gap is correlated with the parity anomaly of the gapless Dirac cone at the bottom surface of the TI film, which determines the sign of its half quantized Hall conductivity. These analyses suggest that the switching of ferroelectricity alters the dominance of density distribution within the MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} layers, leading to switchable Hall conductivity in the MnBi2Te4/Sb2Te3\mathrm{MnBi}_{2}\mathrm{Te}_{4}/\mathrm{Sb}_{2}\mathrm{Te}_{3} semi-magnetic TI.

Before closing, we wish to emphasize the significance of this work from both the fundamental and practical aspects. First, our work explores the delicate interplay between the surface states of a TI and antiferromagnetism, uncovering a pathway to achieve HQH conductance that challenges the prevailing notion that antiferromagnetic systems with zero net magnetization yield no anomalous Hall effect. More importantly, the switching ability of the HQH conductance via ferroelectricity in the proposed semi-magnetic MnBi2Te4/Sb2Te3\mathrm{MnBi}_{2}\mathrm{Te}_{4}/\mathrm{Sb}_{2}\mathrm{Te}_{3} heterostructure can significantly broaden the scope of practical device applications, especially compared to systems that rely on ferromagnetic phase[15, 16, 32, 35] [3]. Secondly, since observation temperatures of the quantum anomalous Hall effect have so far been limited to only a few kelvin[32, 63, 64] [3], significant efforts continue to be made to identify new quantum topological materials in the antiferromagnetic phase[65, 66]. Here, the proposed antiferromagnetic phase exhibits a large magnetic gap of 16.47 meV and a relatively higher Néel temperature of ∼39\sim39 K suggesting that the observation temperature for the HQH effect in the present system can be much higher than what has been observed so far in the ferromagnetic phase (∼1\sim1 K)[16]. From the practical aspect, the proposed MnBi2Te4/Sb2Te3\mathrm{MnBi}_{2}\mathrm{Te}_{4}/\mathrm{Sb}_{2}\mathrm{Te}_{3} heterostructure is also physically realistic. Moreover, our detailed ab initio molecular dynamics simulations have shown that the predicted heterostructure is stable at least up to 200 K (see Figure S10), thereby offering a desirable temperature range for the fabrication of such systems and exploration of the emergent quantum transport properties.

In summary, following the structural and compositional compatibility between MnBi2Te4\mathrm{MnBi}_{2}\mathrm{Te}_{4} and Sb2Te3\mathrm{Sb}_{2}\mathrm{Te}_{3}, we have comprehensively demonstrated that the proposed multiferroic MnBi2Te4/Sb2Te3\mathrm{MnBi}_{2}\mathrm{Te}_{4}/\mathrm{Sb}_{2}\mathrm{Te}_{3} heterostructures exhibit moderate sliding energy barriers and ferroelectrically switchable HQH conductivity at elevated temperatures. This central finding offers a highly viable route for designing low-power memory devices with antiferromagnetic spintronic applications at relatively high temperatures.

Acknowledgements

This work was supported by the National Natural Science Foundation of China (Grant Nos., 12374458, 12488101, 11974323, 12004368, 12474134, W2433002 and GG9990001216), the Innovation Program for Quantum Science and Technology (Grant No. 2021ZD0302800), the Strategic Priority Research Program of Chinese Academy of Sciences (Grant No. XDB0510200), the Anhui Provincial Key Research and Development Project (Grant No. 2023z04020008), the Research Grants Council, University Grants Committer, Hong Kong (Grant Nos. C7012-21G and 17301823), and Quantum Science Center of Guangdong-Hong Kong-Macao Greater Bay Area (Grant No. GDZX2301005).

References

  1. [8]M. Vizner Stern; Y. Waschtitz; W. Cao, et al. Interfacial ferroelectricity by van der Waals sliding, Science 2021, 372, 1462-1466.
  2. [9]Peng Meng; Yaze Wu; Renji Bian, et al. Sliding induced multiple polarization states in two-dimensional ferroelectrics, Nat. Commun. 2022, 13, 7696.DOI
  3. [10]Luojun Du; Tawfique Hasan; Andres Castellanos-Gomez, et al. Engineering symmetry breaking in 2D layered materials, Nat. Rev. Phys. 2021, 3, 193-206.
  4. [11]Zhenhua Qiao; Shengyuan A. Yang; Wanxiang Feng, et al. Quantum anomalous Hall effect in graphene from Rashba and exchange effects, Phys. Rev. B 2010, 82, 161414(R).DOI
  5. [12]Wang-Kong Tse; Zhenhua Qiao; Yugui Yao, et al. Quantum anomalous Hall effect in single-layer and bilayer graphene, Phys. Rev. B 2011, 83, 155447.DOI
  6. [13]J. G. Checkelsky; R. Yoshimi; A. Tsukazaki, et al. Trajectory of the anomalous Hall effect towards the quantized state in a ferromagnetic topological insulator, Nature Phys. 2014, 10, 731-736.DOI
  7. [14]Zhiyong Wang; Chi Tang; Raymond Sachs, et al. Proximity-Induced Ferromagnetism in Graphene Revealed by the Anomalous Hall Effect, Phys. Rev. Lett. 2015, 114, 016603.pubmed.ncbi.nlm.nih.gov/25615490
  8. [15]Ruie Lu; Hongyi Sun; Shiv Kumar, et al. Half-magnetic topological insulator with magnetization-induced dirac gap at a selected surface, Phys. Rev. X 2021, 11, 011039.DOI
  9. [16]M. Mogi; Y. Okamura; M. Kawamura, et al. Experimental signature of the parity anomaly in a semi-magnetic topological insulator, Nature Phys. 2022, 18, 390–394.DOI
  10. [17]Bo Fu; Jin-Yu Zou; Zi-Ang Hu, et al. Quantum anomalous semimetals, npj Quantum Mater. 2022, 7, 94.arxiv.org/abs/2203.00933
  11. [18]Jin-Yu Zou; Rui Chen; Bo Fu, et al. Half-quantized Hall effect at the parity-invariant Fermi surface, Phys. Rev. B 2023, 107, 125153.DOI
  12. [19]Bo Fu; Kai-Zhi Bai; Shun-Qing Shen. Half-quantum mirror Hall effect, Nat. Commun. 2024, 15, 6939.arxiv.org/abs/2402.02654
  13. [20]Shun-Qing Shen. Half quantized Hall effect, Coshare Science 2024, 02, 01.DOI
  14. [21]W. P. Mason; B. T. Matthias. Theoretical model for explaining the ferroelectric effect in barium titanate, Phy. Rev. 1948, 74, 1622.DOI
  15. [22]Awadhesh Narayan. Class of Rashba ferroelectrics in hexagonal semiconductors, Phys. Rev. B 2015, 92, 220101.DOI
  16. [23]Shi Liu; Youngkuk Kim; Liang Z. Tan, et al. Strain-induced ferroelectric topological insulator, Nano Lett. 2016, 16, 1663-1668.DOI
  17. [24]Bartomeu Monserrat; Joseph W. Bennett; Karin M. Rabe, et al. Antiferroelectric topological insulators in orthorhombic AMgBi compounds (A= Li, Na, K), Phy. Rev. Lett. 2017, 119, 036802.DOI
  18. [25]Jun-Jie Zhang; Dongyang Zhu; Boris I. Yakobson. Heterobilayer with ferroelectric switching of topological state, Nano Lett. 2020, 21, 785-790.DOI
  19. [26]Shiqi Xia; Dimitrios Kaltsas; Daohong Song, et al. Nonlinear tuning of PT symmetry and non-Hermitian topological states, Science 2021, 372, 72-76.DOI
  20. [27]Louis Ponet; S. Artyukhin; Th. Kain, et al. Topologically protected magnetoelectric switching in a multiferroic, Nature 2022, 607, 81-85.DOI
  21. [28]Yan Gong; J. W. Guo; J. H. Li, et al. Experimental realization of an intrinsic magnetic topological insulator, Chinese Phys. Lett. 2019, 36, 076801.DOI
  22. [29]M. M. Otrokov; I. I. Klimovskikh; H. Bentmann, et al. Prediction and observation of an antiferromagnetic topological insulator, Nature 2019, 576, 416-422.DOI
  23. [30]Dongqin Zhang; Minji Shi; Tongshuai Zhu, et al. Topological axion states in the magnetic insulator MnBi2Te4 with the quantized magnetoelectric effect, Phys. Rev. Lett. 2019, 122, 206401.DOI
  24. [31]Jiaheng Li; Yang Li; Shiqiao Du, et al. Intrinsic magnetic topological insulators in van der Waals layered MnBi2Te4-family materials, Sci. Adv. 2019, 5, eaaw5685.DOI
  25. [32]Yujun Deng; Yijun Yu; Meng Zhu Shi, et al. Quantum anomalous Hall effect in intrinsic magnetic topological insulator MnBi2Te4, Science 2020, 367, 895-900.DOI
  26. [33]Chang Liu; Yongchao Wang; Hao Li, et al. Robust axion insulator and Chern insulator phases in a two-dimensional antiferromagnetic topological insulator, Nat. Mater. 2020, 19, 522-527.DOI
  27. [34]Anyuan Gao; Yu-Fei Liu; Chaowei Hu, et al. Layer Hall effect in a 2D topological axion antiferromagnet, Nature 2021, 595, 521-525.
  28. [35]Tengfei Cao; Ding-Fu Shao; Kai Huang, et al. Switchable anomalous Hall effects in polar-stacked 2D antiferromagnet MnBi₂Te₄, Nano Letters 2023, 23, 3781-3787.DOI
  29. [36]Ryota Watanabe; Ryutaro Yoshimi; Kei S. Takahashi, et al. Gate-electric-field and magnetic-field control of versatile topological phases in a semi-magnetic topological insulator, Appl. Phys. Lett. 2023, 123, 183102.arxiv.org/abs/2309.13510
  30. [37]Blöchl, P. E. Projector augmented-wave method, Phys. Rev. B 1994, 50, 17953.pubmed.ncbi.nlm.nih.gov/9976227
  31. [38]G. Kresse; Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Phys. Rev. B 1996, 54, 11169.pubmed.ncbi.nlm.nih.gov/9984901
  32. [39]John P. Perdew; Kieron Burke; Matthias Ernzerhof. Generalized gradient approximation made simple, Phys. Rev. Lett. 1996, 77, 3865.pubmed.ncbi.nlm.nih.gov/10062328
  33. [40]A. I. Liechtenstein; V. I. Anisimov; Zaanen, J. Density-functional theory and strong interactions: Orbital ordering in Mott-Hubbard insulators, Phy. Rev. B 1995, 52, R5467.pubmed.ncbi.nlm.nih.gov/9981806
  34. [41]Huisheng Zhang; Wenjia Yang; Yingying Wang, et al. Tunable topological states in layered magnetic materials of MnSb₂Te₄, MnBi₂Se₄, and MnSb₂Se₄, Phy. Rev. B 2021, 103, 094433.DOI
  35. [42]QuanSheng Wu; ShengNan Zhang; Hai-Feng Song, et al. WannierTools: An open-source software package for novel topological materials, Comput. Phys. Commun. 2018, 224, 405-416.
  36. [43]Arash A. Mostofi; Jonathan R. Yates; Young-Su Lee, et al. Wannier90: A tool for obtaining maximally-localised Wannier functions, Comput. Phys. Commun. 2008, 178, 685-699.DOI
  37. [44]Xuelai Li; Feng Rao; Zhitang Song, et al. Experimental and theoretical study of silicon-doped Sb₂Te₃ thin films: Structure and phase stability, Appl. Surf. Sci. 2011, 257, 4566-4568.DOI
  38. [45]Stefan Grimme; Jens Antony; Stephan Ehrlich, et al. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu, J. Chem. Phys. 2010, 132, 154104.DOI
  39. [46]Shuichi Nosé. A unified formulation of the constant temperature molecular dynamics methods, J. Chem. Phys. 1984, 81, 511-519.DOI
  40. [47]Shun-Qing Shen, Topological insulators. Second ed.; Springer: Berlin, 2017; Vol. 187.
  41. [48]Haijun Zhang; Chao-Xing Liu; Xiao-Liang Qi, et al. Topological insulators in Bi₂Se₃, Bi₂Te₃ and Sb₂Te₃ with a single Dirac cone on the surface, Nature Phys. 2009, 5, 438-442.DOI
  42. [49]Xu He; Nicole Helbig; Matthieu J. Verstraete, et al. TB2J: A python package for computing magnetic interaction parameters, Comput. Phys. Commun. 2021, 264, 107938.
  43. [50]Nikhil Sivadas; Satoshi Okamoto; Xiaodong Xu, et al. Stacking-dependent magnetism in bilayer CrI₃, Nano Lett. 2018, 18, 7658-7664.DOI
  44. [51]Alexander Zeugner; Frederik Nietschke; Anja U. B. Wolter, et al. Chemical aspects of the candidate antiferromagnetic topological insulator MnBi₂Te₄, Chem. Mater. 2019, 31, 2795-2806.
  45. [52]Weijiong Chen; Zeyuan Sun; Zhongjie Wang, et al. Direct observation of van der Waals stacking–dependent interlayer magnetism, Science 2019, 366, 983-987.DOI
  46. [53]Ze Liu; Jefferson Zhe Liu; Yao Cheng, et al. Interlayer binding energy of graphite: A mesoscopic determination from deformation, Phy. Rev. B 2012, 85, 205418.
  47. [54]R. D. King-Smith; David Vanderbilt. Theory of polarization of crystalline solids, Phy. Rev. B 1993, 47, 1651.pubmed.ncbi.nlm.nih.gov/10006189
  48. [55]G. Henkelman; B. P. Uberuaga; H. Jónsson. A climbing image nudged elastic band method for finding saddle points and minimum energy paths, J. Chem. Phys. 2000, 113, 9901-9904.DOI
  49. [56]Wenjun Ding; Jianbao Zhu; Zhe Wang, et al. Prediction of intrinsic two-dimensional ferroelectrics in In₂Se₃ and other III₂–VI₃ van der Waals materials, Nat. Commun. 2017, 8, 14956.DOI
  50. [57]Xue-Juan Dong; Jing-Yang You; Zhen Zhang, et al. Great enhancement of Curie temperature and magnetic anisotropy in two-dimensional van der Waals magnetic semiconductor heterostructures, Phy. Rev. B 2020, 102, 144443.DOI
  51. [58]M. M. Otrokov; I. P. Rusinov; M. Blanco-Rey, et al. Unique thickness-dependent properties of the van der Waals interlayer antiferromagnet MnBi₂Te₄ films, Phys. Rev. Lett. 2019, 122, 107202.DOI
  52. [59]Kyungwha Park; J. J. Heremans; V. W. Scarola, et al. Robustness of topologically protected surface states in layering of Bi₂Te₃ thin films, Phys. Rev. Lett. 2010, 105, 186801.DOI
  53. [60]Yugui Yao; Leonard Kleinman; A. H. MacDonald, et al. First principles calculation of anomalous Hall conductivity in ferromagnetic bcc Fe, Phys. Rev. Lett. 2004, 92, 037204.pubmed.ncbi.nlm.nih.gov/14753904
  54. [61]Xi Wu; Chao Ruan; Peizhe Tang, et al. Irremovable Mn-Bi Site Mixing in MnBi₂Te₄, Nano Lett. 2023, 23, 5048-5054.DOI
  55. [62]Y. J. Chen; L. X. Xu; J. H. Li, et al. Topological electronic structure and its temperature evolution in antiferromagnetic topological insulator MnBi₂Te₄, Phys. Rev. X 2019, 9, 041040.DOI
  56. [63]Guroui Chen; Aaron L Sharpe; Eli J Fox, et al. Tunable correlated Chern insulator and ferromagnetism in a moiré superlattice, Nature 2020, 579, 56-61.DOI
  57. [64]Tonghang Han; Zhengguang Lu; Yuxuan Yao, et al. Large quantum anomalous Hall effect in spin-orbit proximitized rhombohedral graphene, Science 2024, 384, 647-651.DOI
  58. [65]Jian Zhou; Qi-Feng Liang; Hongming Weng, et al. Predicted quantum topological Hall effect and noncoplanar antiferromagnetism in K₀.₅RhO₂, Phy. Rev. Lett. 2016, 116, 256601.
  59. [66]Zhenhua Qiao; Wei Ren; Hua Chen, et al. Quantum anomalous Hall effect in graphene proximity coupled to an antiferromagnetic insulator, Phys. Rev. Lett. 2014, 112, 116404.pubmed.ncbi.nlm.nih.gov/24702394

Paper details

vlnc:W_7pytbwuw
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 10

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents