WorksPhysics and Astronomy
Ridge-Spin-Layer Coupling and Emergent Ridgetronics in 2D Altermagnets
Abstract
Extending valleytronics from discrete points to continuous lines in momentum space transforms dispersionless bands into a controllable degree of freedom. Here we introduce ridge–spin–layer coupling (RSLC) in two-dimensional (2D) altermagnets, where a one-dimensional continuous line of dispersionless electronic states (a ridge) in momentum space locks to both spin polarization and atomic sublayer. This ridge-induced quenching of kinetic energy mimics flat-band physics, yet crucially, RSLC grants external control, allowing for layer-selective switching of ridge orientation in reciprocal space, spin-filtered transport in real space, and a distinct electric Hall response. Guided by collinear spin layer group symmetry, we identify three 2D candidate materials, namely MgMo(PO), Ca(FeP), and MgV(SO), each featuring a crossed-ridge structure with two ridges, one per spin channel and sublayer. Our work establishes ridgetronics as a controllable platform for direction-discriminating currents, bridging dispersionless bands with multifunctional device operation.
Introduction
The discovery of new degrees of freedom (d.o.f.) in materials has long driven progress in electronics technologies [1, 2, 3, 4]. While early devices relied solely on electron charge [5, 6, 7, 8], the introduction of spin d.o.f. launched spintronics and revolutionized data storage [9, 10, 11, 12]. More recently, emergent d.o.f. such as the valley [13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24], which originates from discrete zero-dimensional energy extrema in momentum space, have enabled valleytronics with distinctive physical responses. The search for new d.o.f. therefore remains a central theme in condensed matter physics.
What new physics would emerge if discrete energy extremum points (valleys) were connected into a continuous line? We term such a continuous extremum line a “ridge”. The answer lies in the quenching of kinetic energy along the ridge direction, which intrinsically suppresses current and offers a new knob for directional transport. Unlike discrete zero-dimensional points [Fig. 1 (a)], certain extreme electronic states can exhibit macroscopic continuity along a specific momentum direction , forming a ridge state [Fig. 1 (b)]. In such a state, the energy becomes independent of , yielding zero group velocity and thus intrinsically suppressing current along that direction. This stands in contrast to conventional valleys, where electrons can propagate in all directions and current cannot be blocked along any path. As a concrete example, consider a ridge extending along in a two-dimensional (2D) system. Its energy takes the form:
which is independent of . According to Boltzmann transport theory [25, 26, 27], the group velocity component , and the conductivity tensor is given by
where is the relaxation time [27, 28, 29] and denote Cartesian directions. Thus, , indicating that ridge states intrinsically suppress current along the -direction, confining transport to the orthogonal direction and offering a built-in mechanism for directional control.
Beyond conceptual appeal, the practical impact of any new d.o.f. hinges on controllability, which in turn requires the ability to couple with other system knobs. Recent advances [30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47] have uncovered a rich landscape of intertwined d.o.f. in magnetic and nonmagnetic systems, including spin–valley [30, 31, 32, 33, 34, 35], valley–layer [36, 37, 38], spin–corner [39], and mirror–spin [40] couplings, among others [41, 42, 43, 44, 45, 46, 47]. These findings establish new paradigms for multifunctional devices. Yet a critical gap remains: how can we not only discover but also efficiently harness a new degree of freedom? This demands a general symmetry framework to identify the d.o.f. and, more importantly, to enable its active coupling to external controls, such as spin or layer, for functional ridgetronic devices.
In this Letter, we establish a complete paradigm for altermagnetic ridgetronics through a novel physical mechanism: ridge–spin–layer coupling (RSLC). Via spin layer group theory, we specify the conditions for ridge states and demonstrate their realization in altermagnets. To elucidate this mechanism, we identify three candidate materials including MgMo(PO), Ca(FeP), and MgV(SO) that host such ridge states. In systems with RSLC, we uncover a suite of unprecedented phenomena, including quasi-one-dimensional (Q1D) 100% spin-polarized transport and electrically switchable spin signals. These findings establish the ridge as both a new and highly tunable electronic state, opening the field of ridgetronics as a promising frontier for controlling quantum transport in low dimensions.
Ridge–spin–layer coupling.—Taking 2D ridge altermagnets with square lattices as a representative system, we demonstrate that their physical mechanisms can lay the foundation for the generation of d.o.f. such as ridges and spins. characteristics. These d.o.f., in turn, underpin a direction-discriminating current response. This response is a hallmark of ridgetronics that extends the valleytronic paradigm into both magnetic and nonmagnetic realms.
Inspired by spintronics, where time-reversal symmetry () breaking in magnetic systems enables access to the electron’s spin d.o.f., we introduce a -broken system with only two ridges ( and ) obtaining opposite spin polarizations. When and are connected by the spin group symmetry , they coupled to up-spin and down-spin respectively Figure 1(c). Among magnetic systems, altermagnets have recently emerged as the third class of magnetic materials, characterized by opposite spin sublattices connected by ( shall only be improper or proper rotations) [48, 49, 50, 51, 52]. Altermagnets combine properties of both ferromagnets and conventional antiferromagnets, making them an ideal platform for realizing ridge–spin coupling by naturally satisfying the required symmetry conditions.
Figure 1. (a) Zero-dimensional valley (localized extremum) versus (b) ridge state (macroscopically continuous along ). (c) Two ridges and are connected by and exhibit opposite spin polarization in the nonrelativistic case. (d) Two ridges and have opposite layer polarization, connected by , and tunable via an out-of-plane electric field . (e) Combining (c) and (d): and are linked by , with opposite spin polarization (nonrelativistic) and opposite layer polarization.
Within this platform, however, the two ridge states remain indistinguishable in energy and difficult to be manipulated. Introducing the layer d.o.f. overcomes this limitation, offering a versatile manipulation knob via direct coupling to out-of-plane electric field . Ridge–layer coupling is achieved when and carry opposite layer polarization [see SM [53] Eq. (7)], as permitted by . Applying a breaks the symmetry and lifts the energy degeneracy between and [See Fig. 1(d)], thereby enabling precise electrical control over the direction-discriminating currents.
Altermagnets go beyond individual couplings by enabling the simultaneous integration of ridge, spin, and layer d.o.f. into a unified framework, which we term RSLC. Here, ridges and are connected by spin group symmetry . This novel coupling combines spin-polarized current generation from ridge–spin coupling with electrical addressability from ridge–layer coupling, introducing functionalities that transcend either alone Figure 1(e). Under RSLC, each ridge locks to a specific spin-layer combination, allowing an electric field to control both ridge and spin. This multifunctional coupling thus forms the core of altermagnetic ridgetronics, offering a versatile knob for on-demand spin–layer pathways.
Physical mechanism for RSLC.—Beyond proposing the novel concept of RSLC, it is equally important to establish the mechanism for its realization.
The hopping mechanism between () or bitals provides insights for the implementation of RSLC. Specifically, the () orbital exhibits strong (weak) hopping along and weak (strong) hopping along , respectively [54]. This feature serves as an important source of superconductivity in some materials [55, 56, 57, 58]. Based on the hopping characteristics, we propose the lattice model shown in Figure 2(a), where the and orbitals occupy Wyckoff positions with a site multiplicity of two. The opposite magnetic moments at sites 1 and 2 result in distinct spin-channel energies for the () orbitals at each site, i.e., and , where . On the other hand, since sites 1 and 2 are related by the symmetry operation , the following energy degeneracies hold: , , where and . For simplicity, are chosen to construct a tight-binding model as an illustration [See Figure 2(a)]. Considering only the hopping terms shown in Figure 2(a), the Hamiltonian can be written as
Figure 2. (a) Schematic lattice model for RSLC based on hopping. (b) Tight-binding band structure corresponding to the lattice in (a). (c) Schematic lattice model based on hopping. (d) Tight-binding band structure corresponding to the lattice in (c). (e) Crystal structure of monolayer MgMo(PO) in side and top views. (f) Nonrelativistic band structure of monolayer MgMo(PO). Red and blue lines denote spin-up and spin-down channels, respectively. The green box highlights the hopping (ridge states) near the Fermi level, while the orange box marks the -based states.
| SLGs | SSGs | Wyckoff Positions | RSLC | Materials |
| L.49.3.1.1 | 3.75.1.1 | 2c | - | |
| L.50.3.1.1 | 3.81.1.1 | 2e,2f,2g | MgMo(PO),MgV(SO) | |
| L.51.6.1.1 | 10.83.1.1 | 2e | - | |
| L.53.16.1.1 | 16.89.1.1 | 2e | - | |
| L.55.23.1.1 | 25.99.1.1 | 2c | - | |
| L.57.19.1.1 | 16.111.1.1 | 2e | - | |
| L.59.23.1.1 | 25.115.1.1 | 2e,2f,2g | Ca(FeP) | |
| L.61.37.1.1 | 47.123.1.1 | 2f | - |
Table 1. List of spin layer groups (SLGs) in 2D altermagnets with square lattices that permit ridge–spin coupling, along with their corresponding spin space groups (SSGs) and the required Wyckoff positions for magnetic atoms (third column). The fourth column indicates whether each SLG additionally supports ridge–spin–layer coupling (RSLC), and candidate materials for several SLGs are listed in the final column.
Considering , the band structure of this model along a suitable path is shown in Figure 2(b). This yields the general form of the RSLC band model. For comparison, a similar hopping model is constructed using the basis (Figure 2(c)). By taking the same path as in Figure 2(b) and appropriate values of and , the band structure shown in Figure 2(d) is obtained, where the spin splitting originates from the difference between and in the system.
To guide further material searches, we establish the symmetry requirements for its material realization in the following. The above discussion establishes two fundamental prerequisites: the system must be altermagnetic in a 2D square lattice, thereby providing the necessary spin splitting and enabling orthogonal ridges; and the two ridges are connected via the symmetry operation . In addition, three further criteria should be taken into account. The magnetic atoms should occupy Wyckoff positions with a site multiplicity of two, confining the unit cell to contain exactly two magnetic atoms. The magnetic moment direction must lie out of the 2D plane, preserving the symmetry of the magnetic unit cell. Furthermore, the band representation along the high-symmetry point in reciprocal space is 1D, ensuring that the spins of each ridge remain non-degenerate.
Applying these constraints to the 40 spin layer groups (SLGs) of altermagnetic square lattices [59], we identify 8 SLGs that satisfy all requirements for ridge–spin coupling. Within these SLGs, . Notably, when the basic states occupy the 2e (or 2f, 2g) Wyckoff positions of SSG or the 2e (or 2f, 2g) positions of SSG , the spins may couple to opposite layers, giving rise to RSLC. In these two spin-layer groups, the orbital operator belongs to the set . For materials exploration, we also list the corresponding spin space groups (SSGs) [60, 61, 62], which are summarized together with their associated Wyckoff positions in Table I. Detailed information, including symmetry operations and Wyckoff positions is provided in Sec. II of SM [53].
With ridge, spin, and layer d.o.f. thus coupled, an out-of-plane electric field generates a layer-dependent electrostatic potential, enabling precise control over the ridges. This provides an ideal platform for spintronic device design.
Candidate materials.—We propose several candidate materials belonging to SSG 3.81.1.1 and SSG 25.115.1.1 (see Table I), which are promising ridge materials exhibiting intrinsic RSLC. We take monolayer MgMo(PO) as a representative example to demonstrate the origin of ridge states and their unique properties. The properties of additional candidates are provided in the SM [53].
Monolayer MgMo(PO), whose parent compound is MgMo(PO) (mp-2228679), crystallizes in a tetragonal lattice structure [space group (No. 81)] with optimized lattice constants Å. As shown in Figure 2(e), Mg is bonded in a 4-coordinate geometry to four equivalent O atoms. All Mg-O bond lengths are 2.03 Å. Mo is bonded to five O atoms to form MoO square pyramids (colored in blue) that share corners with four PO tetrahedra (colored in claybank). By comparing the energies of several possible magnetic configurations, we confirm that the ground state of the monolayer exhibits Néel-type magnetic order [See SM[53] for details]. The magnetic moments localized on the Mo sites, with a magnitude of , and align along the out-of-plane easy axis, resulting in a maximum value of the magnetic anisotropy energy of 3.23 meV/Mo [53].
Symmetry analysis places monolayer MgMo(PO) in SSG . The Mo atoms occupy the Wyckoff position 2g and are therefore situated in two distinct layers, namely the top and bottom layers, as illustrated in Figure 2(a). The top- and bottom-layer Mo atoms are related by the symmetry operation , which interchanges the spin and layer polarizations of electronic states along the -X-M and -Y-M paths. The nonrelativistic band structure of monolayer MgMo(PO) is shown in Figure 2(f). The predominant basis of ridge states enclosed in the green box are , as revealed by the projected band structure of Mo -orbitals in Fig. S2 [53]. This is fully consistent with our elucidation of the RSLC generation mechanism in Figure 2(a-Figure 2b). Moreover, the band structure in the orange box is dominated by the hopping mechanism, which also corroborates the theoretical analysis in Figure 2(c-Figure 2d). These results establish monolayer MgMo(PO) as an ideal ridge altermagnet hosting a RSLC.
Layer-dependent Q1D spin transport.— 2D ridge altermagnets with RSLC exhibit layer-dependent Q1D spin transport phenomenon: two orthogonal ridges are locked to opposite spins and opposite sublayers, as depicted in Figure 3(a). Near the Fermi level, conductivity is dominated by () and (), respectively. In this setup, current flows along while flows along , providing a minimal platform for ridgetronics. Of the ridge states in monolayer MgMo(PO), the spin-up channel in the valence bands is predominantly localized in the bottom Mo layer, while the spin-down channel resides mainly in the top Mo layer [see Fig. 3(b)]. We calculate layer-resolved longitudinal conductivities for both spin channels in monolayer MgMo(PO), are shown in Figs. 3(c-I) and 3(c-II).
Figure 3. (a) Illustration of layer-dependent Q1D spin transport. (b) Layer-resolved analysis of the ridge states [highlighted by the green box in (b)]. Red and blue edges denote spin-up and spin-down components, respectively, while the fill color indicates layer polarization . The inset shows the first Brillouin zone with high-symmetry points marked. (c) From left to right: (I) calculated electric conductivity for up-spin (red-edged circles) and down-spin (blue-edged circles) channels in monolayer MgMo(PO); (II) calculated electric conductivity for up-spin and down-spin channels; (III) calculated spin polarization of conductivities, and . The filling color of the circles represents layer polarization in all three panels.
The system exhibits strictly spin-anisotropic conductivity: only and are nonzero, in excellent agreement with theory. We define the spin polarization of conductivities as:
As shown in Figure 3(c-III), and reach and , respectively, within the altermagnetic ridge state energy window. Thus, the ridge state generates fully spin-polarized currents with opposite spin orientations along orthogonal directions.
RSLC also gives rise to intrinsically layer-dependent Q1D spin transport. Symmetry analysis shows that monolayer MgMo(PO) exhibits RSLC via two ridges along the -X-M and -Y-M paths, interconnected by , which swaps both spin and layer polarizations. This symmetry-enforced coupling locks spin and layer d.o.f. to orthogonal ridge directions, underpinning the observed layer-dependent Q1D spin transport.
Layer-dependent electric Hall effect.— The electric Hall effect (EHE) [63] in monolayer MgMo(PO) arises from an electric gate field rather than a magnetic field. RSLC allows the electric field to selectively manipulate layer-polarized ridges, producing a layer-dependent Hall current without an external magnetic field. This mechanism offers an efficient route for controlling 2D ridge altermagnets via electric gate tunability.
In our system, two ridges are connected via in the nonrelativistic case, with out-of-plane magnetic moments as ground state (MAE = 6.6 meV). The monolayer MgMo(PO) thus possesses symmetry in the relativistic case, forbidding the intrinsic Hall conductivity but allowing the intrinsic EHE coefficient . Owing to SLC, the ridge states are tunable by the gate field , as illustrated in Figure 4(a-Figure 4b).
Figure 4. (a,b) Illustration of the layer-dependent electric Hall effect under opposite electric fields . (c,d) Relativistic ridge state of monolayer MgMo(PO) under applied electric fields and eV/Å applied separately. (e,f) Anomalous hall conductivity of monolayer MgMo(PO) under the same field conditions as in (c,d).
First-principles calculations agree excellently with symmetry analysis. Without , the ridges are degenerate and . Applying eV/Å lifts the degeneracy between and [Figure 4(c)], and induces a sizable [Figure 4(e)]. No interfering bands appear between -0.5 eV to -0.1 eV, yielding a pronounced EHE peak. Reversing reverses the sign of [Figure 4(f)], enabling control over the Hall current direction.
Conclusion
In summary, we have introduced the concept of ridge altermagnets as 1D dispersionless electronic continua in momentum space and realized it in 2D altermagnets via a novel RSLC. This coupling enables layer-controlled, Q1D spin transport with fully spin-polarized currents along orthogonal directions, as demonstrated in monolayer MgMo(PO) and related candidates. The same RSLC mechanism further gives rise to a layer-dependent electric Hall effect, offering a magnetic-field-free route for Hall current generation. Our findings establish RSLC as a fundamental mechanism for spin-dependent physics in altermagnets and open the door to ridgetronic devices that harness dispersionless electronic states for next-generation spintronic functionalities.
References
References
- [1]F. A. Zwanenburg, A. S. Dzurak, A. Morello, M. Y. Simmons, L. C. L. Hollenberg, G. Klimeck, S. Rogge, S. N. Coppersmith, and M. A. Eriksson, Silicon quantum electronics, Rev. Mod. Phys. 85, 961 (2013).
- [2]I. Žutić, J. Fabian, and S. Das Sarma, Spintronics: Fundamentals and applications, Rev. Mod. Phys. 76, 323 (2004).
- [3]V. Baltz, A. Manchon, M. Tsoi, T. Moriyama, T. Ono, and Y. Tserkovnyak, Antiferromagnetic spintronics, Rev. Mod. Phys. 90, 015005 (2018).
- [4]J. R. Schaibley, H. Yu, G. Clark, P. Rivera, J. S. Ross, K. L. Seyler, W. Yao, and X. Xu, Valleytronics in 2D materials, Nat. Rev. Mater. 1, 16055 (2016).
- [5]C. Joachim, J. K. Gimzewski, and A. Aviram, Electronics using hybrid-molecular and mono-molecular devices, Nature 408, 541 (2000).
- [6]J. Wu, W. Pisula, and K. Müllen, Graphenes as Potential Material for Electronics, Chem. Rev. 107, 718 (2007).
- [7]Q. H. Wang, K. Kalantar-Zadeh, A. Kis, J. N. Coleman, and M. S. Strano, Electronics and optoelectronics of two-dimensional transition metal dichalcogenides, Nat. Nanotechnol. 7, 699 (2012).
- [8]G. Fiori, F. Bonaccorso, G. Iannaccone, T. Pala- cios, D. Neumaier, A. Seabaugh, S. K. Banerjee, and L. Colombo, Electronics based on two-dimensional materials, Nat. Nanotechnol. 9, 768 (2014).
- [9]S. D. Bader and S. S. P. Parkin, Spintronics, Annu. Rev. Condens. Matter Phys. 1, 71 (2010).
- [10]S. A. Wolf, D. D. Awschalom, R. A. Buhrman, J. M. Daughton, S. Von Molnár, M. L. Roukes, A. Y. Chtchelkanova, and D. M. Treger, Spintronics: A Spin-Based Electronics Vision for the Future, Science 294, 1488 (2001).
- [11]C. Chappert, A. Fert, and F. N. Van Dau, The emergence of spin electronics in data storage, Nat. Mater. 6, 813 (2007).
- [12]D. D. Awschalom and M. E. Flatté, Challenges for semiconductor spintronics, Nat. Phys. 3, 153 (2007).
- [13]O. Gunawan, Y. P. Shkolnikov, K. Vakili, T. Gökmen, E. P. De Poortere, and M. Shayegan, Valley Susceptibility of an Interacting Two-Dimensional Electron System, Phys. Rev. Lett. 97, 186404 (2006).
- [14]K. Takashina, Y. Ono, A. Fujiwara, Y. Takahashi, and Y. Hirayama, Valley Polarization in Si(100) at Zero Magnetic Field, Phys. Rev. Lett. 96, 236801 (2006).
- [15]K. Eng, R. N. McFarland, and B. E. Kane, Integer Quantum Hall Effect on a Six-Valley Hydrogen-Passivated Silicon (111) Surface, Phys. Rev. Lett. 99, 016801 (2007).
- [16]D. Xiao, W. Yao, and Q. Niu, Valley-Contrasting Physics in Graphene: Magnetic Moment and Topological Transport, Phys. Rev. Lett. 99, 236809 (2007).
- [17]A. Rycerz, J. Tworzydło, and C. W. J. Beenakker, Valley filter and valley valve in graphene, Nat. Phys. 3, 172 (2007).
- [18]X. Xu, W. Yao, D. Xiao, and T. F. Heinz, Spin and pseudospins in layered transition metal dichalcogenides, Nat. Phys. 10, 343 (2014).
- [19]M. Sui, G. Chen, L. Ma, W.-Y. Shan, D. Tian, K. Watanabe, T. Taniguchi, X. Jin, W. Yao, D. Xiao, and Y. Zhang, Gate-tunable topological valley transport in bilayer graphene, Nat. Phys. 11, 1027 (2015).
- [20]W.-Y. Tong, S.-J. Gong, X. Wan, and C.-G. Duan, Concepts of ferrovalley material and anomalous valley Hall effect, Nat. Commun. 7, 13612 (2016).
- [21]C. Jin, J. Kim, M. I. B. Utama, E. C. Regan, H. Kleemann, H. Cai, Y. Shen, M. J. Shinner, A. Sengupta, K. Watanabe, T. Taniguchi, S. Tongay, A. Zettl, and F. Wang, Imaging of pure spin-valley diffusion current in WS2–WSe2 heterostructures, Science 360, 893 (2018).
- [22]J. Xin, Y. Tang, Y. Liu, X. Zhao, H. Pan, and T. Zhu, Valleytronics in thermoelectric materials, npj Quantum Mater. 3, 9 (2018).
- [23]A. Rycerz, J. Tworzydło, and C. W. J. Beenakker, Valley filter and valley valve in graphene, Nat. Phys. 3, 172 (2007).
- [24]Y. P. Shkolnikov, E. P. De Poortere, E. Tutuc, and M. Shayegan, Valley Splitting of AlAs Two-Dimensional Electrons in a Perpendicular Magnetic Field, Phys. Rev. Lett. 89, 226805 (2002).
- [25]G. Pizzi, D. Volja, B. Kozinsky, M. Fornari, and N. Marzari, BoltzWann: A code for the evaluation of thermoelectric and electronic transport properties with a maximally-localized Wannier functions basis, Comput. Phys. Commun. 185, 422 (2014).
- [26]J. M. Ziman, Principles of the Theory of Solids, 2nd ed. (Cambridge University Press, 1972).
- [27]T. J. Scheidemantel, C. Ambrosch-Draxl, T. Thonhauser, J. V. Badding, and J. O. Sofo, Transport coefficients from first-principles calculations, Phys. Rev. B 68, 125210 (2003).
- [28]G. K. H. Madsen, Automated Search for New Thermoelectric Materials: The Case of LiZnSb, J. Am. Chem. Soc. 128, 12140 (2006).
- [29]B. R. Nag, Electron Transport in Compound Semiconductors, Vol. 11 (Springer Science & Business Media, New York, 2012).
- [30]H.-Y. Ma, M. Hu, N. Li, J. Liu, W. Yao, J.-F. Jia, and J. Liu, Multifunctional antiferromagnetic materials with giant piezomagnetism and noncollinear spin current, Nat. Commun. 12, 2846 (2021).
- [31]R. González-Hernández, L. Šmejkal, K. Výborný, Y. Yahagi, J. Sinova, T. Jungwirth, and J. Železný, Efficient Electrical Spin Splitter Based on Nonrelativistic Collinear Antiferromagnetism, Phys. Rev. Lett. 126, 127701 (2021).
- [32]X. Li, T. Cao, Q. Niu, J. Shi, and J. Feng, Coupling the valley degree of freedom to antiferromagnetic order, Proc. Natl. Acad. Sci. 110, 3738 (2013).
- [33]D. Xiao, G.-B. Liu, W. Feng, X. Xu, and W. Yao, Coupled spin and valley physics in monolayers of MoS2 and other group-VI dichalcogenides, Phys. Rev. Lett. 108, 196802 (2012).
- [34]M. M. Grujić, M. Ž. Tadić, and F. M. Peeters, Spin-Valley Filtering in Strained Graphene Structures with Artificially Induced Carrier Mass and Spin-Orbit Coupling, Phys. Rev. Lett. 113, 046601 (2014).
- [35]Q. Cui, Y. Zhu, J. Liang, P. Cui, and H. Yang, Spin-valley coupling in a two-dimensional VSi2N4 monolayer, Phys. Rev. B 103, 085421 (2021).
- [36]Z.-M. Yu, S. Guan, X.-L. Sheng, W. Gao, and S. A. Yang, Valley-Layer Coupling: A New Design Principle for Valleytronics, Phys. Rev. Lett. 124, 037701 (2020).
- [37]J. Zhao, G.-B. Liu, P. Chen, Y. Yao, G. Zhang, and L. Du, Layer-valley-valley hall effect under inversion and time-reversal symmetries, Chin. Phys. Lett. 41, 066801 (2024).
- [38]X. Xu, Z. He, Y. Dai, B. Huang, L. Kou, and Y. Ma, Stable valley-layer coupling and design principle in 2D lattice, Appl. Phys. Lett. 119, 073101 (2021).
- [39]Y. Han, C. Cui, X.-P. Li, T.-T. Zhang, Z. Zhang, Z.-M. Yu, and Y. Yao, Controntronics in Two-Dimensional Second-Order Topological Insulators, Phys. Rev. Lett. 133, 176602 (2024).
- [40]D.-W. Zhang, C. Cui, Y. Wang, J. Duan, Z.-M. Yu, and Y. Yao, Quantized spin hall conductivity in altermagnetic Fe2Te2O with mirror-spin coupling, Phys. Rev. B , (2026).
- [41]C. Jiang, F. Liu, J. Cuadra, Z. Huang, K. Li, A. Rasmita, A. Srivastava, Z. Liu, and W.-B. Gao, Zeeman splitting via spin-valley-layer coupling in bilayer MoTe2, Nat. Commun. 8, 802 (2017).
- [42]R. Bertoni, C. W. Nicholson, L. Waldecker, H. Hübener, C. Monney, U. De Giovannini, M. Puppin, M. Hoesch, E. Springate, R. T. Chapman, C. Cacho, M. Wolf, A. Rubio, and R. Ernstorfer, Generation and Evolution of Spin-, Valley-, and Layer-Polarized Excited Carriers in inversion-symmetric WSe2, Phys. Rev. Lett. 117, 277201 (2016).
- [43]Y. Jeong, H. Park, T. Kim, K. Watanabe, T. Taniguchi, J. Jung, and J. Jang, Interplay of valley, layer and band topology towards interacting quantum phases in moiré bilayer graphene, Nat. Commun. 15, 6351 (2024).
- [44]R.-W. Zhang, C. Cui, R. Li, J. Duan, L. Li, Z.-M. Yu, and Y. Yao, Predictable Gate-Field Control of Spin in Alternamagnets with Spin-Layer Coupling, Phys. Rev. Lett. 133, 056401 (2024).
- [45]W. Sun, W. Wang, C. Yang, S. Huang, N. Ding, S. Dong, and Z. Cheng, Designing Spin Symmetry for Alternagnetism with Strong Magnetoelectric Coupling, Adv. Sci. 12, e03235 (2025).
- [46]X. Duan, J. Zhang, Z. Zhu, Y. Liu, Z. Zhang, I. Žutić, and T. Zhou, Antiferroelectric Altermagnets: Antiferroelectricity Alters Magnets, Phys. Rev. Lett. 134, 106801 (2025).
- [47]Y. Zhu, M. Gu, Y. Liu, X. Chen, Y. Li, S. Du, and Q. Liu, Ferroelectric Control of Unconventional Magnetism in Stacked Bilayers, Phys. Rev. Lett. 135, 056801 (2025).
- [48]L. Šmejkal, J. Sinova, and T. Jungwirth, Beyond Conventional Ferromagnetism and Antiferromagnetism: A Phase with Nonrelativistic Spin and Crystal Rotation Symmetry, Phys. Rev. X 12, 031042 (2022).
- [49]L. Šmejkal, J. Sinova, and T. Jungwirth, Emerging Research Landscape of Altermagnetism, Phys. Rev. X 12, 040501 (2022).
- [50]L. Bai, W. Feng, S. Liu, L. Šmejkal, Y. Mokrousov, and Y. Yao, Altermagnetism: Exploring New Frontiers in Magnetism and Spintronics, e Adv. Funct. Mater. 34, 2409327 (2024).
- [51]S. S. Fender, O. Gonzalez, and D. K. Bediako, Altermagnetism: A Chemical Perspective, J. Am. Chem. Soc. 147, 2527 (2025).
- [52]J. Krempaský, L. Šmejkal, S. W. D’Souza, M. Hajaljauoi, G. Springholz, K. Uhlírová, F. Alarab, P. C. Constantinou, V. Strocov, D. Usanov, W. R. Pudelko, R. González-Hernández, A. Birk Hellenes, Z. Jansa, H. Reichlová, Z. Šobáň, R. D. Gonzalez Betancourt, P. Wadley, J. Sinova, D. Kriegner, J. Minár, J. H. Dil, and T. Jungwirth, Altermagnetic lifting of Kramers spin degeneracy, Nature 626, 517 (2024).
- [53]See Supplemental Material for details about spin layer groups, candidate materials and DFT calculations.
- [54]G. v. Chen and C. Wu, Orbital homology of p and t2g orbitals in models and materials, arXiv:2512.22658 (2025).DOI
- [55]W. Huang, Y. Zhou, and H. Yao, Exotic Cooper pairing in multiorbital models of Sr2RuO4, Phys. Rev. B 100, 134506.
- [56]C. Kallin, Chiral p-wave order in Sr2RuO4, Rep. Prog. Phys. 75, 042501.
- [57]S. Raghu, A. Kapitulnik, and S. A. Kivelson, Hidden Quasi-One-Dimensional Superconductivity in Sr2RuO4, Phys. Rev. Lett. 105, 136401.
- [58]L.-F. Lin, N. Kaul, Y. Zhang, A. Moreo, and E. Dagotto, Orbital ordering in the layered perovskite material CsVF4, Phys. Rev. Mater. 5, 025001 (2021).
- [59]Mu Tian et al. (unpublished).
- [60]X. Chen, J. Ren, Y. Zhu, Y. Yu, A. Zhang, P. Liu, J. Li, Y. Liu, C. Li, and Q. Liu, Enumeration and Representation Theory of Spin Space Groups, Phys. Rev. X 14, 031038 (2024).
- [61]Y. Jiang, Z. Song, T. Zhu, Z. Fang, H. Weng, Z.-X. Liu, J. Yang, and C. Fang, Enumeration of Spin-Space Groups: Toward a Complete Description of Symmetries of Magnetic Orders, Phys. Rev. X 14, 031039 (2024).
- [62]Z. Xiao, J. Zhao, Y. Li, R. Shindou, and Z.-D. Song, Spin Space Groups: Full Classification and Applications, Phys. Rev. X 14, 031037 (2024).
- [63]C. Cui, R.-W. Zhang, Y. Qiu, Y. Han, Z.-M. Yu, and Y. Yao, Electric Hall Effect and Quantum Electric Hall Effect, Phys. Rev. Lett. 135, 116301 (2025).