betaFeedback

WorksPhysics and Astronomy

Direct writing of room temperature polariton condensate lattice by top-down approach

Abstract

Realizing lattices of exciton polariton condensates has been of much interest owing to the potential of such systems to realize analog Hamiltonian simulators and physical computing architectures. Prior work on polariton condensate lattices has primarily been on GaAs-based systems, with the recent advent of organic molecules and perovskite systems allowing room-temperature operation. However, in most of these room temperature systems, the lattices are defined using a bottom-up approach by patterning the bottom mirrors, significantly limiting the types of lattices and refractive index contrast that can be realized. Here, we report a direct write approach that uses a Focused Ion Beam (FIB) to etch 2D lattice into a planar microcavity. Such etching of the cavity allows for realizing high refractive index contrast lattices. We realize the polariton condensate lattice using the highly photostable host-guest Frenkel excitons of an organic dye small molecular ionic lattice (SMILES).1,2 The lattice structures are defined on a planar microcavity embedded with SMILES using FIB, allowing the realization of lattices with different geometries, including defect sites on demand. The band structure of the lattice and the emergence of condensation are imaged using momentum-resolved spectroscopy. The present approach allows us to study periodic, quasi-periodic, and disordered polariton condensate lattices at room temperature using a top-down approach without compromising on the quantum yield of the organic excitonic material embedded in the cavity.

the bottom mirrors, significantly limiting the types of lattices and refractive index contrast that can be realized. Here, we report a direct write approach that uses a Focused Ion Beam (FIB) to etch 2D lattice into a planar microcavity. Such etching of the cavity allows for realizing high refractive index contrast lattices. We realize the polariton condensate lattice using the highly photostable host-guest Frenkel excitons of an organic dye small molecular ionic lattice (SMILES).[2] [1] The lattice structures are defined on a planar microcavity embedded with SMILES using FIB, allowing the realization of lattices with different geometries, including defect sites on demand. The band structure of the lattice and the emergence of condensation are imaged using momentum-resolved spectroscopy. The present approach allows us to study periodic, quasi-periodic, and disordered polariton condensate lattices at room temperature using a top-down approach without compromising on the quantum yield of the organic excitonic material embedded in the cavity.

Introduction

Exciton-polaritons are hybrid quasiparticles that arise from the strong coupling between excitons in semiconductors and cavity photons in microcavities. These polaritons possess a small effective mass inherited from the photonic component, as well as strong interactions stemming from the excitonic part.[3, 4, 5, 6] The combination of small effective mass, interaction effects, and bosonic nature enables the observation of intriguing phenomena like Bose-Einstein-like condensation, superfluidity, and vortex formation.[3, 7, 8, 9] [10, 11] The realization of exciton-polariton condensate lattices has emerged as an attractive platform for analog Hamiltonian simulators, such as the classical XY Hamiltonian, and for physical computing architectures.[9] [12, 13, 14, 15]

Previous studies on polariton condensate lattices have primarily focused on GaAs-based systems,16–20 with recent advancements in organic molecules and perovskite systems allowing for room temperature operation.[26, 27, 28, 29, 30, 31] [21, 22, 23, 24, 25] However, most of these room temperature systems rely on a bottom-up approach, where the lattices are defined by patterning the bottom mirrors, significantly limiting the types of lattices and refractive index contrast that can be realized. rors.[32, 33, 34] [25] This is due to the detrimental effect of top-down approaches on the condensates and, thereby significantly limiting the types of lattices and the index contrast that can be achieved. Here, we present a top down approach that utilizes Focused Ion Beam (FIB) etching to pattern a planar microcavity. This etching technique enables the realization of high-contrast lattices, as previously demonstrated in GaAs systems. [31, 35] [16] Specifically, we report direct writing of a two-dimensional exciton-polariton condensate lattice by patterning an array of overlapping pillars etched into a planar microcavity. The patterned microcavity structure shows condensation at room temperature along with the bands arising from the lattice structure. To characterize the fabricated lattice, we employ energy-resolved wavevector imaging of photoluminescence (PL) and perform power-dependent PL measurements to study optical nonlinearities.

Results and discussion

Here, we fabricate an exciton-polariton microcavity on a glass substrate, as shown in Fig. 1a. The cavity consists of a 10.5-pair bottom distributed Bragg reflector (DBR) consisting of alternating layers of a quarter wavelength thick SiO2SiO_2 and TiO2TiO_2 deposited via radio-frequency sputtering. The center wavelength of the bottom DBR was designed to be around 600 nm, and the bandwidth was 200 nm. We use the recently introduced an organic dye small molecule ionic isolation lattice (SMILES) system as the excitonic material owing to their enhanced photostability and high quantum yield. [2, 36] [1] Specifically, we use rhodamine 3B (R3B), a widely used laser dye (with bandgap 2.19 eV, 566 nm), composed as a SMILES material (See methods) (Supporting Information (SI), Fig. S1). 30 nm R3B-SMILES in PMMA matrix is deposited via spin coating onto the bottom DBR as shown in Fig. 1a. The cavity is completed by depositing 100 nm thick silver film on top of the SMILES layer. This results in the formation of a Tamm plasmon cavity mode with loaded QQ of 200 similar to our previous report. [2] Strong coupling between the Tamm mode and the excitons of the SMILES results in the formation of polariton states whose dispersion obtained via Fourier imaging is shown in Fig. 1b along with fits based on the coupled oscillator model. Anticrossing between the upper(UP) and lower polariton(LP) branches is observed at finite in-plane momentum due to the negative detuning (40 meV40\,\mathrm{meV}) of the cavity with respect to the exciton in SMILES. The estimated Rabi splitting based on the coupled oscillator model fit is 100 meV100\,\mathrm{meV}. The strongly coupled cavity is patterned using FIB etching with low ion current (77 pA77\,\mathrm{pA}) and 30 kV30\,\mathrm{kV} voltage to avoid heating caused by the gallium ion beam. The microcavity is patterned into different structures, such as a single pillar, honeycomb unit cell, and honeycomb lattice, as

Image not extracted

Figure 1. (a) Schematic for planar organic exciton-polariton cavity. (b) White light angle-dependent reflectivity of the planar cavity region along with coupled oscillator model fits to the observed dispersion. (c) Schematic for patterned honeycomb organic exciton-polariton lattice. (d) Scanning electron microscope image of a single micropillar, honeycomb unit cell, and lattice patterned on the planar cavity using FIB.

shown schematically in Fig. 1c. The scanning electron microscope images of the patterned structures are shown in Fig. 1d.

In the single pillar case, the refractive index contrast arising from the etching of the pillar (diameter = 2.75 μm2.75\,\mu\mathrm{m}) results in lateral confinement and emergence of discrete polariton states [37, 38, 39, 40, 41] as opposed to dispersive branches observed in planar cavities as shown in SI, Fig. S2a. When the excitation power is increased above the condensation threshold (1.25pth1.25p_{\mathrm{th}}) the emission is observed from the lowest energy state as seen in SI, Fig. S2b.

Image not extracted

Figure 2. Measured real space PL image of honeycomb lattice (a) below condensation threshold and (b) above condensation threshold. (c) Measured momentum space PL emission image of condensate lattice above condensation threshold showing the condensation at the corners of the BZ. Energy resolved momentum space PL (d) below condensation threshold along with tight binding model fits to the observed dispersion and (e) above condensation threshold.(f)Integrated PL intensity and full width at half maximum (FWHM) of condensate lattice PL as a function of pulse energy.

Two-dimensional array of micropillars in a honeycomb lattice geometry with micropillar diameter(dd) 2.75 μm2.75\,\mu\mathrm{m} and lattice constant(aa) 2.40 μm2.40\,\mu\mathrm{m} is realized using FIB following similar approach to the single pillar. The polariton lattice is excited nonresonantly at 514 nm wavelength using a flat top beam with a spot size of approximately 25μm25\mu\mathrm{m}, generated by tightly focusing 100 femtosecond pulsed laser with a repetition rate of 1KHz1\mathrm{KHz} on the back focal plane of a 50x microscope objective (numerical aperture=0.80). Fig.2a and 2b illustrate the real-space PL of the lattice below and above the condensation threshold (pulse energy=10nJ10\mathrm{nJ}), respectively. A distinct transition is observed from delocalized PL to localized PL, specifically at the lattice sites. Fig.2c displays the momentum resolved image of the PL from the lattice after condensation, demonstrating the localization of polariton PL at the six Dirac points of the first Brillouin Zone(BZ). Fig.2d shows the experimentally observed band structure of the honeycomb lattice in Energy resolved momentum space PL with the momentum slice taken along kx=0k_x=0 (dashed line in Fig.2c) below the condensation threshold. Modified bandstructure along other in-plane momentum directions are shown in SI Fig.S3a-c. Above the threshold, we observe the collapse of PL to the lowest energy bands as shown in Fig.2e. Pump power dependence of emission intensity and linewidth is shown in Fig.2f. Clear threshold and nonlinear increase in output intensity is observed along with the decrease in the linewidth indicative of the onset of polariton condensation similar to what was reported previously in non-patterned SMILES system.[2]

Finally, we investigate polariton condensation in 2D honeycomb lattices with varying degree of coupling between the lattice sites and on the presence of defects. Fig.3a-c, show the real space image of condensation in lattices with varying degree of coupling between lattice sites with lattice constant varying from a=2.0μma = 2.0\mu\mathrm{m} to 2.75μm2.75\mu\mathrm{m}. We observe the transition from delocalized to localized condensate formation by increasing the inter-pillar distance (reduced intersite coupling). For the highly coupled case (Fig.3a), the condensate is delocalized over the entire structure in contrast to the weakly coupled case (Fig.3c), where the condensates are localized at the pillar sites. The versatility of our top-down approach is shown in Fig.3 d-f, where lattices with a missing pillar (Fig.3d), missing hole (Fig.3e) and arbitrary defect pattern showing the abbreviation of City College of New York (CCNY) (Fig.3f) are realized. We also studied the role of lattice defects in the condensate formation.

Image not extracted

Figure 3. Real space PL image of polariton condensate lattice with micropillar diameter d=2.75 μmd=2.75\ \mu\mathrm{m}, and lattice constant (a) a=2.0 μma=2.0\ \mu\mathrm{m}, (b) a=2.4 μma=2.4\ \mu\mathrm{m}, (c) a=2.75 μma=2.75\ \mu\mathrm{m}, (d) a=2.4 μma=2.4\ \mu\mathrm{m} with missing lattice sites defect, (e) a=2.4 μma=2.4\ \mu\mathrm{m} with missing hole, (f) a=2.4 μma=2.4\ \mu\mathrm{m} with "CCNY" logo as an example of arbitrary defects that can be realized through design.

Shown in Figure 4a-Figure 4c is the real space image of the PL from the lattice for increasing pump power. Below the condensation threshold, the PL is distributed throughout the lattice. The onset of condensation is observed first at the defect site (Figure 4b), followed eventually by condensation emerging across the entire lattice. The threshold for condensation at the lattice site is lower than what was observed previously in defect-free lattices, indicating enhanced scattering to the defect site.

Image not extracted

Figure 4. Real space PL image of defect lattice with missing hole at (a) p=0.5pthp = 0.5p_{\mathrm{th}} collected for longer integration time (30 sec) to show background lattice below condensation threshold, (b) p=pthp = p_{\mathrm{th}} collected with integration time 1 sec and (c) p=1.25pthp = 1.25p_{\mathrm{th}} collected with integration time 1 sec. Preferential condensation at the lattice defect site is observed.

Conclusion

In summary, we report the realization of room temperature polariton condensate lattice using a top-down fabrication approach involving FIB etching on the host-guest-based organic SMILES material microcavity. Experimental results demonstrate the confinement of polaritons resulting in discrete states and condensation to the ground state energy in the energy-and momentum resolved spectroscopy of single micropillars. Through the patterning of a honeycomb lattice on the SMILES microcavity, we have successfully realized a polariton condensate lattice consisting of coupled micropillars. By changing the lattice constant, we demonstrate the transition from delocalized to localized condensate. Furthermore, we study the effect of deterministically placed defects in the condensate lattice, revealing that condensates prefer high refractive index sites for localization and also reduce the condensation threshold pump power. Our top-down approach provides a versatile platform for studying arbitrary polariton condensate lattices and polaritonic circuits at room temperature over large area.

Methods

SMILES Microcavity

To prepare the SMILES solution, we followed a previously reported recipe. [2] [1] The SMILES-based microcavity is fabricated on a quartz substrate with a 500 nm500\,\mathrm{nm} thick distributed Bragg reflector (DBR) centered at 620 nm620\,\mathrm{nm}. The DBR, composed of 10.5 pairs of SiO2/TiO2\mathrm{SiO}_{2}/\mathrm{TiO}_{2}, was cleaned using O2\mathrm{O}_{2} plasma for 5 minutes. A 30 nm30\,\mathrm{nm} thick SMILES film is then deposited on the cleaned DBR using a spin coating technique with a two-step process. In the first step, the film is spun for 20 seconds at a speed of 1000 rpm, followed by a second step of spinning for 80 seconds at 3000 rpm. The deposited SMILES film is placed in a constant pressure vacuum at 25 ∘C25\,^{\circ}\mathrm{C}. Finally, a 100 nm thick silver layer is deposited on top of the SMILES film using an e-beam evaporator, completing the fabrication of the microcavity.

Experimental techniques

We employed real space PL and Fourier space PL imaging to map the condensate emission characteristics and the band structure of the lattice. For our measurements, we utilized two lasers. To investigate the band structures, we used a 488 nm laser with a repetition rate of 76 MHz to excite the patterned structure on the silver sides of the microcavity. For the excitation of the larger area in the lattice, we created a large laser spot (25 μm25\,\mu\mathrm{m}) by focusing the laser on the back focal plane of the objective lens. The band structure of the lattice is measured using far-field imaging techniques, where the back focal plane of the objective lens is imaged in front of a charged coupled device(CCD) camera. Energy-resolved angle-dependent PL was measured by selecting a specific in-plane momentum using a narrow slit in front of the CCD camera and dispersing the PL using a 300 grooves per line grating. In addition, we employed a pulsed 514nm laser with a pulse width of 280 fs and a repetition rate of 1 kHz1\,\mathrm{kHz} for the condensation experiments. The Brillouin zone and band structure were measured using the Fourier imaging technique.

Coupled oscillator model

Upper and lower polariton branches in reflectivity of the strongly coupled cavity are fit using coupled oscillator model defined by following Hamiltonian matrix:

H=[Ex(k)−iγx/2ggEc(k)−iγc/2](1)H = \begin{bmatrix} E_x(k) - \mathrm{i}\gamma_x/2 & g \\ g & E_c(k) - \mathrm{i}\gamma_c/2 \end{bmatrix} \tag*{(1)}

Where gg is the coupling strength between exciton and single cavity mode. Ex(k)E_x(k) and Ec(k)E_c(k) are the energy of exciton and cavity mode, respectively. γx\gamma_x and γc\gamma_c are full width at half maximum(FWHM) of exciton and cavity mode resonance, respectively.

Tight binding model for bandstructure

Tight binding approximation is used to fit the bandstructure of the honeycomb polariton lattice. The tight binding model for honeycomb polariton lattice is given by the following expression: [38, 42] [16]

E(k)=±tn3+F(k)−tnnF(k)(2)E(k) = \pm t_n\sqrt{3 + F(k)} - t_{nn}F(k) \tag*{(2)}

where F(k) is expressed as:

F(k)=2cos⁡(3kya)+4cos⁡(32kya)cos⁡(32kxa)(3)F(k) = 2\cos\left(\sqrt{3}k_y a\right) + 4\cos\left(\frac{\sqrt{3}}{2}k_y a\right)\cos\left(\frac{3}{2}k_x a\right) \tag*{(3)}

where tnt_n and tnnt_{nn} are coupling to the first and second nearest neighbor and used as free parameters in the fitting. Extracted value of tnn/tnt_{nn}/t_n is ≈0.10\approx0.10, which is in good agreement with the previously reported pattern structure through etching. 16

Supporting Information

Absorption and photoluminescence of SMILES, Polariton condensation in single micropillar, Bandstructure of honeycomb polariton lattice.

Acknowledgments

V.M.M. and R.K.Y. were supported by the U.S. Air Force Office of Scientific Research−MURI Grant FA9550−22−1−0317. S.S., and P.D., acknowledge support from the US National Science Foundation (NSF− QTAQS program OMA−1936351. M.Y.S. work was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under Award No. DE−SC0022036. A.H.O. and A.H.F. acknowledge support from the U.S. National Science Foundation (DMR-2118423).

Declarations

Financial Declaration: The authors declare the following competing financial interest(s): A.H.F. and B.W.L. are cofounders in Halophore, Inc. R.K.Y., S.S., P.D., V.M.M., B.W.L., and A.H.F. have filed a provisional patent application.

Data Availability

All data will be provided by the corresponding authors upon reasonable request.

Absorption and photoluminescence of SMILES

Fig.1 shows absorption and photoluminescence of thin SMILES film on glass. Absorption spectra are measured using a UV-Vis spectrometer, and the PL of the thin film was collected by exciting SMILEs material using a 514nm laser, repetition rate 76 MHz.

Image not extracted

Figure 1 (PDF p. 18). Absorbance and normalized PL intensity of SMILES film on glass

Polarition condensation in single micropillar

We demonstrate the polariton condensation in a single micropillar using energy-resolved momentum space PL. Fig.S2a and b show a single micropillar’s energy-resolved momentum space PL below and above the condensation threshold.

Image not extracted

Figure 2 (PDF p. 19). Momentum space energy resolved photoluminescence from micropillar with diameter, d=2.75 μmd = 2.75\,\mu\mathrm{m} under (a) linear regime at p<pthp < p_{\mathrm{th}} and non-linear regime at (b) p=1.25pthp=1.25p_{\mathrm{th}}

Bandstructure of honeycomb polariton lattice

PL from the honeycomb lattice is captured using energy-resolved momentum space imaging, employing a non-resonant pulsed laser, 514nm514\mathrm{nm} with a repetition rate of 76MHz76MHz and a spot size of 25μm25\mu\mathrm{m}. In the low excitation limit, the incoherent relaxation of polaritons leads to the population of all energy bands. The first Brillouin zone (BZ) of the lattice is measured using FIM at Dirac energy, as depicted in Fig.3a. Dirac points are observed as bright spots at the six corners of the measured first BZ. Energy bands of the honeycomb polariton lattice are measured along line 1 and line 2 (black lines in Fig.3a). Fig.3b displays the energy bands along line 1, exhibiting Dirac points at kx/k0=0,±(2π/3a)k_x/k_0 = 0, \pm(2\pi/3a), accompanied by other higher-order energy bands. The measured bandstructure along line 2, beyond the Dirac point, displays energy bands with a resolved energy gap, as illustrated in Fig.3c.

Image not extracted

Figure 3 (PDF p. 20). (a) Measured BZ of the honeycomb lattice at the Dirac energy. Experimentally measured band structure along with tight binding model fits to the observed dispersion along (b) line 1 at ky=4π33ak_y = \frac{4\pi}{3\sqrt{3}a} and (c) line 2 at ky=0k_y = 0 in (a).

References

  1. [2]Deshmukh, P.; Satapathy, S.; Michail, E.; Olsson, A. H.; Bushati, R.; Yadav, R. K.; Khatoniar, M.; Chen, J.; John, G.; Laursen, B. W.; Amar H. Flood, M. Y., Sfeir; Menon, V. M. Plug-and-Play Molecular Approach for Room Temperature Polariton Condensation. ACS Photonics 2024,
  2. [3]Byrnes, T.; Kim, N. Y.; Yamamoto, Y. Exciton-polariton condensates. Nature Physics 2014, 10, 803–813.DOI
  3. [4]Keeling, J.; Kéna-Cohen, S. Bose–Einstein condensation of exciton-polaritons in organic microcavities. Annual Review of Physical Chemistry 2020, 71, 435–459.DOI
  4. [5]Pandya, R.; Chen, R. Y.; Gu, Q.; Sung, J.; Schnedermann, C.; Ojambati, O. S.; Chikkaraddy, R.; Gorman, J.; Jacucci, G.; Onelli, O. D.; others Microcavity-like exciton-polaritons can be the primary photoexcitation in bare organic semiconductors. Nature communications 2021, 12, 6519.
  5. [6]Dufferwiel, S.; Schwarz, S.; Withers, F.; Trichet, A.; Li, F.; Sich, M.; Del Pozo-Zamudio, O.; Clark, C.; Nalitov, A.; Solnyshkov, D.; others Exciton–polaritons in van der Waals heterostructures embedded in tunable microcavities. Nature communications 2015, 6, 8579.DOI
  6. [7]Altman, E.; Sieberer, L. M.; Chen, L.; Diehl, S.; Toner, J. Two-dimensional superfluidity of exciton polaritons requires strong anisotropy. Physical Review X 2015, 5, 011017.arxiv.org/abs/1311.0876
  7. [8]Amo, A.; Lefrère, J.; Pigeon, S.; Adrados, C.; Ciuti, C.; Carusotto, I.; Houdré, R.; Giacobino, E.; Bramati, A. Superfluidity of polaritons in semiconductor microcavities. Nature Physics 2009, 5, 805–810.DOI
  8. [9]Lagoudakis, P. G.; Berloff, N. G. A polariton graph simulator. New Journal of Physics 2017, 19, 125008.
  9. [26]Su, R.; Wang, J.; Zhao, J.; Xing, J.; Zhao, W.; Diederichs, C.; Liew, T. C.; Xiong, Q. Room temperature long-range coherent exciton polarization condensate flow in lead halide perovskites. Science advances 2018, 4, eaau0244.DOI
  10. [27]Su, R.; Ghosh, S.; Liew, T. C.; Xiong, Q. Optical switching of topological phase in a perovskite polariton lattice. Science Advances 2021, 7, eabf8049.DOI
  11. [28]Su, R.; Fieramosca, A.; Zhang, Q.; Nguyen, H. S.; Deleporte, E.; Chen, Z.; San-vitto, D.; Liew, T. C.; Xiong, Q. Perovskite semiconductors for room-temperature exciton-polaritonics. Nature Materials 2021, 20, 1315–1324.DOI
  12. [29]Wu, J.; Ghosh, S.; Su, R.; Fieramosca, A.; Liew, T. C.; Xiong, Q. Nonlinear parametric scattering of exciton polaritons in perovskite microcavities. Nano Letters 2021, 21, 3120–3126.DOI
  13. [30]Spencer, M. S.; Fu, Y.; Schlaus, A. P.; Hwang, D.; Dai, Y.; Smith, M. D.; Gamelin, D. R.; Zhu, X.-Y. Spin-orbit-coupled exciton-polariton condensates in lead halide perovskites. Science Advances 2021, 7, 7667.arxiv.org/abs/2106.06034
  14. [31]Tao, R.; Peng, K.; Haeberlé, L.; Li, Q.; Jin, D.; Fleming, G. R.; Kéna-Cohen, S.; Zhang, X.; Bao, W. Halide perovskites enable polaritonic XY spin Hamiltonian at room temperature. Nature Materials 2022, 21, 761–766.DOI
  15. [32]Dusel, M.; Betzold, S.; Egorov, O. A.; Klembt, S.; Ohmer, J.; Fischer, U.; Höfling, S.; Schneider, C. Room temperature organic exciton-polariton condensate in a lattice. Nature communications 2020, 11, 2863.DOI
  16. [33]Scafirimuto, F.; Urbonas, D.; Becker, M. A.; Scherf, U.; Mahrt, R. F.; Stöferle, T. Tunable exciton-polariton condensation in a two-dimensional Lieb lattice at room temperature. Communications Physics 2021, 4, 39.
  17. [34]Jayaprakash, R.; Whittaker, C. E.; Georgiou, K.; Game, O. S.; McGhee, K. E.; Coles, D. M.; Lidzey, D. G. Two-dimensional organic-exciton polariton lattice fabricated using laser patterning. ACS Photonics 2020, 7, 2273–2281.DOI
  18. [35]Real, B.; Jamadi, O.; Milićević, M.; Pernet, N.; St-Jean, P.; Ozawa, T.; Montambaux, G.; Sagnes, I.; Lemaître, A.; Le Gratiet, L.; others Semi-Dirac transport and anisotropic localization in polariton honeycomb lattices. Physical review letters 2020, 125, 186601.DOI
  19. [36]Kacenauskaite, L.; Stenspil, S. G.; Olsson, A. H.; Flood, A. H.; Laursen, B. W. Universal Concept for Bright, Organic, Solid-State Emitters- Doping of Small-Molecule Ionic Isolation Lattices with FRET Acceptors. Journal of the American Chemical Society 2022, 144, 19981–19989.DOI
  20. [37]Ferrier, L.; Wertz, E.; Johne, R.; Solnyshkov, D. D.; Senellart, P.; Sagnes, I.; Lemaître, A.; Malpuech, G.; Bloch, J. Interactions in confined polariton condensates. Physical Review Letters 2011, 106, 126401.pubmed.ncbi.nlm.nih.gov/21517332
  21. [38]Mangussi, F.; Milićević, M.; Sagnes, I.; Le Gratiet, L.; Harouri, A.; Lemaître, A.; Bloch, J.; Amo, A.; Usaj, G. Multi-orbital tight binding model for cavity-polariton lattices. Journal of Physics: Condensed Matter 2020, 32, 315402.
  22. [39]Klaas, M.; Flayac, H.; Amthor, M.; Savенко, I.; Brodbeck, S.; Ala-Nissila, T.; Klembt, S.; Schneider, C.; Höfling, S. Evolution of temporal coherence in confined exciton-polariton condensates. Physical Review Letters 2018, 120, 017401.DOI
  23. [40]Kuznetsov, A. S.; Helgers, P. L.; Biermann, K.; Santos, P. V. Quantum confinement of exciton-polaritons in a structured (Al, Ga) As microcavity. Physical Review B 2018, 97, 195309.DOI
  24. [41]Klein, T.; Klembt, S.; Durupt, E.; Kruse, C.; Hommel, D.; Richard, M. Polariton lasing in high-quality selenide-based micropillars in the strong coupling regime. Applied Physics Letters 2015, 107.
  25. [42]Pan, H.; Winkler, K.; Powlowski, M.; Xie, M.; Schade, A.; Emmerling, M.; Kamp, M.; Klembt, S.; Schneider, C.; Byrnes, T.; others Two-kind boson mixture honeycomb Hamiltonian of Bloch exciton-polaritons. Physical Review B 2019, 99, 045302.DOI

Paper details

vlnc:W_7wfgzdb6
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents