WorksPhysics and Astronomy
Boiling and cavitation caused by transient heat transfer in superfluid helium-4
Abstract
Superfluid helium-4 (He II) has been widely utilized as a coolant in various scientific and engineering applications due to its superior heat transfer capability. An important parameter required in the design of many He II based cooling systems is the peak heat flux , which refers to the threshold heat flux above which boiling spontaneously occurs in He II. Past experimental and numerical studies showed that increases when the heating time is reduced, which leads to an intuitive expectation that very high may be achievable at sufficiently small . Knowledge on how actually behaves at small is important for applications such as laser ablation in He II. Here we present a numerical study on the evolution of the thermodynamic state of the He II in front of a planar heater by solving the He II two-fluid equations of motion. For an applied heat flux, we determine the heating time beyond which the He II near the heater transits to the vapor phase. As such, a curve correlating and can be obtained, which nicely reproduces some relevant experimental data. Surprisingly, we find that there exists a critical peak heat flux , above which boiling occurs nearly instantaneously regardless of . We reveal that the boiling in this regime is essentially cavitation caused by the combined effects of the first-sound and the second-sound waves in He II. Based on this physical picture, an analytical model for is developed, which reproduces the simulated values at various He II bath temperatures and hydrostatic head pressures. This work represents a major progress in our understanding of transient heat transfer in He II.
Introduction
When saturated liquid is cooled to below about 2.17 K, it undergoes a phase transition to the superfluid phase (known as He II) [1]. Phenomenologically, He II can be regarded as a mixture of two miscible fluid components: an inviscid and zero-entropy superfluid and a viscous normal fluid that consists of thermal quasiparticles (i.e., phonons and rotons) [2]. He II has many unique thermal and mechanical properties. For instance, it supports two sound-wave modes: an ordinary pressure-density wave (i.e., the first sound) where the two fluids oscillate in phase, and a temperature-entropy wave (i.e., the second sound) where the two fluids oscillate oppositely [2]. Furthermore, heat transfer in He II is via an extremely effective counterflow mode [2]: the normal fluid carries the heat and moves away from the heat source at a mean velocity , where is the heat flux, is the He II temperature, and are respectively the total density and the specific entropy of the He II; while the superfluid moves in the opposite direction at a mean velocity to ensure zero net mass flow (here and denote the densities of the superfluid and the normal fluid, respectively). When the relative velocity of the two fluids exceeds a small critical value [3], a chaotic tangle of quantized vortex lines are created spontaneously in the superfluid, each carrying a quantized circulation around its angstrom-sized core [4]. A mutual friction force between the two fluids then emerges due to the scattering of the thermal quasiparticles off the quantized vortices [5], which can lead to novel flow characteristics in both fluids [6, 7, 8, 9, 10].
Due to the superior heat transfer capability, He II has been widely utilized in various scientific and engineering applications for cooling devices such as superconducting magnets, superconducting accelerator cavities, and satellites [11]. Many of these applications involve high-flux transient heat transfer from a solid surface to He II, which is a complex process that involves the interplay of counterflow, second-sound emission, and vortex generation [12]. When the heat flux is higher than a threshold value denoted as the peak heat flux , boiling of He II can spontaneously occur on the heating surface. This peak heat flux is an important parameter needed in the design of many He II based cooling systems, which has been the subject of extensive experimental and numerical studies [13, 14, 15, 16, 17, 18, 19, 20]. A power-law dependence of on the heating time was reported in literature, where the power index varies in the range of 0.25 to 0.5 depending on the magnitude of the applied heat flux and other experimental conditions such as the He II bath temperature and the hydrostatic head pressure (where is the He II depth and is the gravitational acceleration) [15, 16, 17, 18, 19]. These results may give an intuitive expectation that very high may be achievable at sufficiently small . However, knowledge on how actually behaves in the high heat flux and short heating time regime is limited. Such knowledge could benefit various research fields such as nanomaterial fabrication via laser ablation in He II [21, 22].
In this paper, we present a numerical study of the - correlation with an emphasis on the high heat-flux regime. By solving the He II two-fluid equations of motion coupled with the Vinen’s equation for the vortex-line density [5], we examine the evolution of the thermodynamic state of the He II in front of a planar heater. For an applied heat flux , we determine the heating time beyond which the He II near the heater surface transits to the vapor phase. The obtained curves show good agreement with relevant experimental data. Surprisingly, we find that there exists a critical peak heat flux , above which boiling occurs nearly instantaneously regardless of . Our analysis shows that the boiling in this regime is indeed heat-induced cavitation on the heater surface caused by combined effects of the first-sound and the second-sound waves in He II accompanying the heat transfer. We discuss an analytical model for evaluating and show that this model can nicely reproduce the simulated values at various He II bath temperatures and hydrostatic head pressures.
The paper is organized as follows. In § 1.1, we outline the numerical model adopted in our study and briefly discuss some characteristic features of transient heat transfer in He II. In § 2, we explain how the correlation is determined at a given and the He II depth . A comparison of the obtained curves with available experimental data is made, and the appearance of the unexpected critical peak heat flux is discussed. In § 3, we present a systematic study on how depends on and . The underlying physical mechanism of is explained in § 4. Finally, a brief summary is given in Sec. VI.
Numerical model
There have been a variety of methods developed for studying heat transfer and flow dynamics in He II under the influence of quantized vortices. For a comprehensive review of these methods, one may refer to Refs. [23, 24]. In this study, we adopt the two-fluid hydrodynamic model presented in our previous work [12] to examine 1D heat transfer in He II from a planar heater. This model consists of the following conservation equations for the He II mass, momentum, and energy:
where denotes the total momentum density, is the He II pressure, and is the chemical potential of He II. Considering the large relative velocity of the two fluids at high heat fluxes, we also include the corrections to the thermodynamic properties of He II as proposed by Landau [2, 25]:
where all the static properties (i.e., with superscript ) are extracted from the Hepak dynamic library [26]. Typically, the corrections amount to no more than a few percent of the property values in static He II.
The Gorter-Mellink mutual friction per unit fluid volume depends on the vortex-line density (i.e., length of vortices per unit volume) and as [27]:
where is a temperature-dependent mutual friction coefficient [28]. To determine , we need to know the spatial and temporal evolution of . For this purpose, we adopt the Vinen’s equation [5]:
where , , and are temperature-dependent phenomenological coefficients [5]. We use the values recommended by Kondaurova et al. for these coefficients since they give simulation results that agree well with experimental observations [29]. The term accounts for the drifting of the vortices [30, 31], where we take the drift velocity to be the local superfluid velocity [5]. Nonetheless, we find that this drifting effect is negligible in highly transient heat transfer processes [12]. The above model represents a coarse-grained description of the two-fluid hydrodynamics, since the action of individual vortices on the normal fluid is not resolved [32, 33]. Nonetheless, when the vortex-line density is relatively high, this model was shown to describe non-isothermal flows in He II very well [12, 34].
In our study of transient heat transfer from a planar heater in He II, we consider a 1D computational domain with the heater located at as shown in Figure 1 (a). To generate a rectangular heat pulse of duration with a surface heat flux , we adopt a time-dependent boundary condition on the heater surface: for the normal fluid and for the superfluid during ; and at . An initial vortex-line density of is also assumed, which is comparable to typical densities of remnant vortices in He II containers [35]. Indeed, the exact value of does not affect the simulation results for the range of considered in our work [12]. We evolve Eqs. (1)–(9) using the MacCormack’s predictor-corrector scheme with a spatial step and a time step , and we also adopt a flux-corrected transport method to suppress numerical instabilities [36].
Figure 1. (a) A schematic diagram showing the transient heat transfer process from a planar heater located at . (b) Simulated curves showing the temperature increment in He II at various times when a heat pulse of W/cm with a duration ms is applied. The bath temperature is K, and a He II depth m is assumed. (c) The spatial profiles of near the heater at various .
To illustrate the key features of transient heat transfer in He II, we show in Figure 1 (b) the simulated spatial profiles of the temperature increment at various for a representative case with W/cm and ms. This simulation was performed at a bath temperature K with a He II depth m. One can see that a second-sound pulse featured by a positive emerges in He II, which carries the heat energy and propagates away from the heater surface at the known second-sound speed (i.e., m/s at 1.78 K [28]). Near the heater surface where the vortex-line density grows rapidly, the interaction between the vortices and the second-sound pulse can convert the thermal energy carried by the pulse to locally deposited heat. This process results in a heated layer of He II (i.e., the thermal layer) adjacent to the heater surface [12]. To make this thermal layer more visible, we plot the profile near the heater in Figure 1 (c). As the heat pulse ends, on the heater surface reaches the highest value. After that, the thermal layer spreads out diffusively [11] so that on the heater surface decreases. This example clearly shows that the largest temperature increment in He II occurs near the heater surface by the end of the heat pulse. Therefore, in our subsequent study on the onset of boiling in He II, we shall focus on the state variation of the He II adjacent to the heater.
Peak heat flux calculation
For a given helium bath condition (i.e., and ), the peak heat flux depends on the heat-pulse duration . To determine the correlation between and , we adopt a method by scanning as illustrated in Figure 2 (a). This figure shows the evolution of the thermodynamic state of the He II at the first grid point for heat pulses with the same flux W/cm but with different duration . All the curves start from the same initial state marked by the black open circle, i.e., K and where is the saturation pressure at and m. The He II states at the end of the heat pulses are marked by the filled circles of the respective colors. It is clear that when the heater turns on, there is a pressure drop followed by an increase of the He II temperature. As the heat pulse ends, the pressure spikes up in all the cases and the state curves evolve back to the starting point. Obviously, the He II state at the end of the heat pulse gets closer to the saturation line at larger . We consider that boiling occurs when the state curve reaches the saturation line. For the example shown in Figure 2 (a), boiling occurs at ms.

Figure 2. (a) Evolution of the He II thermodynamics state at when heat pulses of W/cm with different duration are applied. The filled circles indicate the He II states at the end of the heat pulses. (b) The simulated curve showing the dependance of the peak heat flux and the pulse duration . The dashed line denotes that above a critical peak heat flux , the onset time of boiling suddenly drops to the order of .
By repeating the above analysis at various applied heat fluxes, we can determine the corresponding pulse durations beyond which boiling occurs. The results for K and m are collected in Figure 2 (b). We see that when is greater than about s, increases with decreasing , which agrees with the trend reported in literature [15, 16, 17, 18, 19]. However, when the applied heat flux reaches a critical value W/cm, we find surprisingly that the onset time of boiling suddenly jumps from about s to an extremely small value. This value is found to be of the order , i.e., the traveling time of the second-sound pulse to reach the first grid point. At heat fluxes higher than , boiling always occurs on a similar time scale. This time scale suggests that the onset time for boiling would become arbitrarily small as one approaches the heater surface. However, in practice, the onset time will be limited by various factors such as the time it takes for vapor bubbles to grow on the heater surface, which is about a few microseconds for the bubbles to reach a radius of about m [37, 38]. The appearance of the critical peak heat flux and the associated sudden drop of the onset time of boiling to the order of are previously unreported phenomena, which indicates the existence of an unusual mechanism of boiling in He II.
Before moving to the next section to present our systematic study of , we would like to compare our model simulations with some available experimental data. In Figure 3, we show the experimental data of versus obtained by Tsoi and Lutset [15] and by Shimazaki et al [18]. The work of Tsoi and Lutset adopted a thin-film nichrome heater (surface area: cm) immersed in He II at K, and the boiling was detected by monitoring the pressure change in He II using a piezosensor. The experiment of Shimazaki et al. was conducted at K and utilized a slightly smaller heater (area: cm), where the boiling was detected by measuring thermal shockwaves using a superconducting temperature sensor. The exact hydrostatic head pressures in these experiments were not reported. Nonetheless, we can perform simulations at the corresponding with a range of compatible with the expected He II depths estimated based on their setup schematics. The simu-

Figure 3. Comparison of the simulated peak heat flux and some relevant experimental data. The blue circles and squares are data obtained by Tsoi and Lutset at 1.794 K [15]. The open and filled circles are data obtained by Shimazaki et al. at 2 K [18], where the open circles indicate possible onset of the boiling while the filled circles denote firm observation of the boiling. The purple and the green curves are our simulation at K with m and K with m, respectively. The purple band indicates the span of the curve when is varied in the range of m, while the green band is for in the range of m.
lated curves are shown in Figure 3, which agree well with these experimental data. This agreement validates our model. Note that due to the limited sensor response times, the sudden drop of the onset time of boiling at heat fluxes above was not resolvable in these experiments.
Critical peak heat flux variation
In order to understand the physical mechanism underlying the critical peak heat flux , we need to first conduct a systematic study on its dependence on the helium bath condition. For this purpose, we have repeated the afore-mentioned analysis at various and . In Figure 4 (a), we show the calculated curves for in the range of K with a fixed He II depth of m. The critical peak heat flux at each is identified and marked by the filled circle. From this study, the dependence of on is obtained, which is shown in Figure 4 (b). first increases with increasing before reaching a maximum at K. Then, decreases as further increases. The maximum value of appears to be achieved at the bath temperature where the two fluids have about the same densities.
(a)
(b)
Figure 4. (a) Calculated - curves at various with a fixed He II depth . The critical peak heat flux for each curve is marked by the filled circle of the respective color. (b) The obtained critical peak heat flux as a function of . The black dots are simulation data. The solid and the dashed curves are calculated using Eq. (13) with and without the term, respectively.
When the He II depth is changed, the dependence of on remains similar to that presented in Figure 4 (b) but its exact value changes. To illustrate how varies with quantitatively, we fix the bath temperature at K and calculate the curves at various He II depth . Representative results for in the range of are shown in Figure 5a, where can be determined (marked by the filled circles). The obtained is then plotted as a function of in Figure 5b. It is clear that increases monotonically with increasing .
Explanation of Critical Peak Heat Flux
The studies presented in the previous sections show that the critical peak heat flux depends on both and and is likely associated with the propagation of the second-sound pulse since the corresponding boiling time is on the order of . To better understand the physical processes that controls , we show in Figure 6(a) the evolution of the He II state adjacent to the heater (i.e., ) when the applied heat flux gradually increases.
Figure 6. (a) Evolution of the He II state at when heat pulses of different are applied. The asterisk in each curve denotes the end state of the fast process, and the filled circle marks where the state curve reaches the saturation line. The inset shows the obtained correlation between and . (b) Time evolution of the He II pressure , temperature , and the vortex-line density at , , and for the case with . All the simulations are conducted at and .
All the cases start from the same initial state as in Figure 2(a), i.e., and with . In what follows, we present a few important features observed in this study.
First, when the heater turns on, there is a fast process during which the pressure drops by and the temperature increases by . This process occurs on a time scale of . The end state of this fast process is marked by the asterisk for each curve in Figure 6(a). It is clear that the magnitudes of both and increase with increasing the heat flux . To provide a more direct view of the fast process, we show the time evolution of the He II pressure, temperature, and the vortex-line density at , , and for a representative case with in Figure 6(b). For the curve, following the fast process the He II temperature and pressure remain nearly constant for over . During this period, the vortex-line density gradually grows following an initial rapid increase of is controlled by the generation term (i.e., the last term) in Eq. (9), which is also the reason why the exact value of the initial line density does not affect the simulation result. When builds up to a sufficient level (i.e., of the order ), local heating due to the mutual friction makes the He II temperature rise again. This heating process drives the He II state at further towards the saturation line. Interestingly, at the critical peak heat flux , the state curve of the He II at reaches the saturation line during the fast process without involving any subsequent slower heating process. Therefore, the onset time for boiling suddenly drops to the order of (see the inset in Figure 6(a)). At heat fluxes higher than , the boiling is largely controlled by the sudden drop in pressure across the saturation line, a phenomenon that is known as cavitation [39].
Based on the physical picture presented above, we can indeed develop an analytical model to evaluate . When the heater turns on, a second-sound pulse emerges from the heater surface. At short times when the vortex-line density near the heater is relatively low, the temperature increment within the second-sound pulse zone is related to the applied heat flux as [2]:
where the subscripts “2nd” and “bath” denote the parameters evaluated in the second-sound pulse zone and in the He II bath, respectively. is the specific heat of He II, and the second term in the above equation comes from the correction term in Eq. (6). Within the second-sound pulse zone, a counterflow of the two fluids establishes as shown schematically in Figure 7. The velocities of the two fluids are given by and . Accordingly, due to Eq. (2), the finite and lead to a pressure change in the second-sound pulse zone as given by:
Figure 7. A schematic diagram showing the temperature and pressure changes as well as the motion of the two fluids in the first-sound and the second-sound pulse zones.
This pressure drop is essentially a manifestation of the Bernoulli effect due to the motion of the two fluids in the second-sound zone.
Besides the effects due to the second-sound pulse, there is another subtle effect. Note that He II has a negative thermal expansion coefficient at temperatures above about [28]. Therefore, the He II density in the second-sound zone must increase due to the temperature rise , which requires a mass flow towards this region. To supply the mass, a first-sound pulse is generated where the two fluids move in phase at a velocity towards the second-sound wavefront, as shown in Figure 7. The mass flux should balance the needed mass associated with the expansion of the second-sound pulse zone, i.e., . This finite leads to a pressure drop in the first-sound pulse zone. To the lowest order in , one can derive from Eq. (2) as:
where is the speed of the first sound in He II (i.e., about at ). The pressure drop in the first-sound zone generates a pulling force exerting on the wavefront of the second-sound zone, which results in a total pressure drop in the second-sound zone as . This effect can be clearly observed in Figure 6 (b) at mm (and mm), since the first-sound pulse and the second-sound pulse arrive at different times.
At the critical peak heat flux , the temperature increment and the total pressure drop associated with the second-sound pulse would drive the He II at from the initial state to the saturation line upon its arrival. Therefore, the following equation must hold:
where enters the equation through , , and via Eqs. (10)–(12). Using this model, we have calculated as a function at m and as a function of at K. The results are included in Figure 4 (b) and Figure 5 (b) as the solid curves. Excellent agreement between the model’s calculation and the simulated values is observed, which proves that our understanding of the mechanism underlying the critical peak heat flux is correct. To see how large the first-sound effect is, we have also repeated the calculation using Eq. (13) but without the term. The results are shown as the dashed
(a)
(b)
Figure 5. (a) Calculated - curves at various with a fixed bath temperature . The critical peak heat flux for each curve is marked by the filled circle of the respective color. (b) The obtained critical peak heat flux as a function of . The black dots are simulation data. The solid and the dashed curves are calculated using Eq. (13) with and without the term, respectively.
curves in Figure 4 (b) and Figure 5 (b). Obviously, the first-sound effect is non-negligible at these large heat fluxes.
Summary
We have conducted a numerical study on 1D transient heat transfer in He II from a planar heater. The peak heat flux for the onset of boiling in He II is determined as a function of the heat-pulse duration . A major finding in our study is the observation of a critical peak heat flux above which boiling occurs almost instantaneously. Our analysis shows that the boiling at heat fluxes lower than is caused by a heating process, which is associated with the relatively slow buildup of the quantized vortices and the thermal layer in front of the heater. When the applied heat flux is higher than , the boiling is essentially a cavitation on the heater surface due to the combined effects of the first-sound and the second-sound waves in He II. A theoretical model for evaluating is developed, which nicely reproduces the simulated values at various He II bath temperatures and hydrostatic head pressures. Inspired by this work, a question we plan to address next is how the boiling physics may change in non-homogeneous heat transfer in He II. As shown in our early work [12], heat transfer of He II in non-homogeneous geometries (such as from cylindrical or spherical heaters) can exhibit new features. Understanding the behavior of the peak heat flux in these geometries could benefit research work such as quench-spot detection on He II cooled superconducting accelerator cavities [40, 41] and the heat and mass transfer processes due to a vacuum failure in He II cooled accelerator beamline tubes [42, 43, 44, 45].
Acknowledgments
The authors would like to acknowledge the support from the U.S. Department of Energy under Grant No. DE-SC0020113. The work was conducted at the National High Magnetic Field Laboratory at Florida State University, which is supported through the National Science Foundation Cooperative Agreement No. DMR-1644779 and the state of Florida.
References
- [1]D. R. Tilley and J. Tilley, Superfluidity and Superconductivity, 2nd ed., Graduate Student Series in Physics (Adam Hilger Ltd, Bristol, 1986).
- [2]L. D. Landau and E. M. Lifshitz, Fluid Mechanics, 2nd ed., Vol. 6 (Pergamon Press, Oxford, 1987).
- [3]W. F. Vinen, Mutual friction in a heat current in liquid helium II. I. experiments on steady heat currents, Proc. R. Soc. Lond. A 240, 114 (1957).
- [4]R. J. Donnelly, Quantized Vortices in Helium II, Vol. 2 (Cambridge University Press, Cambridge, 1991).
- [5]W. F. Vinen, Mutual friction in a heat current in liquid helium II. II. experiments on transient effects, Proc. R. Soc. A 240, 128 (1957).
- [6]A. Marakov, J. Gao, W. Guo, S. W. Van Sciver, G. G. Ihas, D. N. McKinsey, and W. F. Vinen, Visualization of the normal-fluid turbulence in counterflowing superfluid ⁴He, Phys. Rev. B 91, 094503 (2015).DOI
- [7]J. Gao, E. Varga, W. Guo, and W. F. Vinen, Energy spectrum of thermal counterflow turbulence in superfluid helium-4, Phys. Rev. B 96, 094511 (2017).
- [8]J. Gao, W. Guo, S. Yui, M. Tsubota, and W. F. Vinen, Dissipation in quantum turbulence in superfluid ⁴He above 1 K, Phys. Rev. B 97, 184518 (2018).
- [9]S. Bao, W. Guo, V. S. L’vov, and A. Pomyalov, Statistics of turbulence and intermittency enhancement in superfluid ⁴He counterflow, Phys. Rev. B 98, 174509 (2018).DOI
- [10]B. Mastracci and W. Guo, Exploration of thermal counterflow in He II using particle tracking velocimetry, Phys. Rev. Fluids 3, 063304 (2018).
- [11]S. W. Van Sciver, Helium Cryogenics, 2nd ed., International Cryogenics Monograph Series (Springer, New York, 2012).
- [12]S. Bao and W. Guo, Transient heat transfer of superfluid ⁴He in nonhomogeneous geometries: Second sound, rarefaction, and thermal layer, Phys. Rev. B 103, 134510 (2021).
- [13]H. Kobayashi and K. Yasukōchi, Maximum and minimum heat flux and temperature fluctuation in film-boiling states in superfluid helium, in Advances in Cryogenic Engineering (Springer, 1980) pp. 372–377.DOI
- [14]S. K. Nemirovskii and A. N. Tsoi, Transient thermal and hydrodynamic processes in superfluid helium, Cryogenics 29, 985 (1989).DOI
- [15]A. Tsoi, Boiling up of helium I, helium II, and nitrogen during transient heat release, Inzhenerno-Fizicheskii Zhurnal 51, 5 (1985).DOI
- [16]B. A. Danilchenko, M. O. Lutset, and V. N. Poroshin, Limit of transient heat absorption by superfluid helium for very large heat pulses, Cryogenics 29, 444 (1989).DOI
- [17]R. Wang, Criterion for quantum turbulence onset after rectangular heat pulse in superfluid helium, Cryogenics 35, 883 (1995).DOI
- [18]T. Shimazaki, M. Murakami, and T. Kanari, Measurement of characteristic time for quantized vortex tangle development in He II, Cryogenics 38, 601 (1998).DOI
- [19]L. Kondaurova, V. Efimov, and A. Tsoi, Influence of quantum turbulence on the processes of heat transfer and boiling in superfluid helium, J. Low Temp. Phys. 187, 80 (2017).DOI
- [20]L. P. Kondaurova, Dynamics of vortex line density and heat transfer processes in superfluid helium, Low Temp. Phys. 44, 29 (2018).DOI
- [21]E. Latimer, D. Spence, C. Feng, A. Boatwright, A. M. Ellis, and S. Yang, Preparation of ultrathin nanowires using superfluid helium droplets, Nano Lett. 14, 2902 (2014).DOI
- [22]E. B. Gordon, M. E. Stepanov, M. I. Kulish, A. V. Karabulin, V. I. Matyushenko, and I. I. Khodos, The nanowires growth by laser ablation of metals inside rotating superfluid helium, Laser Phys. Lett. 16, 026002 (2018).DOI
- [23]S. K. Nemirovskii and W. Fiszdzon, Chaotic quantized vortices and hydrodynamic processes in superfluid helium, Rev. Mod. Phys. 67, 37 (1995).DOI
- [24]S. K. Nemirovskii, On the closure problem of the coarse-grained hydrodynamics of turbulent superfluids, J. Low Temp. Phys. 201, 254 (2020).DOI
- [25]I. M. Khalatnikov, An Introduction to the Theory of Superfluidity, 1st ed. (CRC Press, 2000).
- [26]V. D. Arp, R. D. McCarty, and B. A. Hands, HEPAK - Thermophysical properties of helium from 0.8K or the melting line to 1500K, Cryodata Inc. (2005).
- [27]W. F. Vinen, Mutual friction in a heat current in liquid helium II. III. Theory of the mutual friction, Proc. R. Soc. Lond. A 242, 493 (1957).DOI
- [28]R. J. Donnelly and C. F. Barenghi, The observed properties of liquid helium at the saturated vapor pressure, J. Phys. Chem. Ref. Data 27, 1217 (1998).DOI
- [29]L. Kondaurova, V. Efimov, A. N. Tsoi, Influence of quantum turbulence on the processes of heat transfer and boiling in superfluid helium, J. Low Temp. Phys. 187, 80 (2017).DOI
- [30]K. W. Schwarz, Three-dimensional vortex dynamics in superfluid ⁴He: Homogeneous superfluid turbulence, Phys. Rev. B 38, 2398 (1988).pubmed.ncbi.nlm.nih.gov/9946544
- [31]S. K. Nemirovskii, Macroscopic dynamics of superfluid turbulence, Low Temp. Phys. 45, 841 (2019).DOI
- [32]S. Yui, H. Kobayashi, M. Tsubota, and W. Guo, Fully coupled two-fluid dynamics in superfluid ⁴He: Anomalous anisotropic velocity fluctuations in counterflow, Phys. Rev. Lett. 124, 155301 (2020).DOI
- [33]B. Mastracci, S. Bao, W. Guo, and W. F. Vinen, Particle tracking velocimetry applied to thermal counterflow in superfluid ⁴He: Motion of the normal fluid at small heat fluxes, Phys. Rev. Fluids 4, 083305 (2019).DOI
- [34]Y. A. Sergeev and C. F. Barenghi, Turbulent radial thermal counterflow in the framework of the HVBK model, EPL 128, 26001 (2019).
- [35]D. D. Awschalom and K. W. Schwarz, Observation of a remanent vortex-line density in superfluid helium, Phys. Rev. Lett. 52, 49 (1984).DOI
- [36]C. A. J. Fletcher, Specific Techniques for Different Flow Categories, 2nd ed., Computational Techniques for Fluid Dynamics, Vol. 2 (Springer, Berlin, 2003).
- [37]W. Guo and H. J. Maris, Observations of the motion of single electrons in liquid helium, J. Low Temp. Phys. 148, 199 (2007).DOI
- [38]W. Guo, D. Jin, G. M. Seidel, and H. J. Maris, Experiments with single electrons in liquid helium, Phys. Rev. B 79, 054515 (2009).
- [39]C. E. Brennen, Cavitation and Bubble Dynamics (Cambridge University Press, Cambridge, 2013).
- [40]S. Bao and W. Guo, Quench-spot detection for superconducting accelerator cavities via flow visualization in superfluid helium-4, Phys. Rev. Appl. 11, 044003 (2019).DOI
- [41]S. Bao, T. Kanai, Y. Zhang, L. N. Cattafesta, and W. Guo, Stereoscopic detection of hot spots in superfluid ⁴He (He II) for accelerator-cavity diagnosis, Int. J. Heat Mass Transf. 161, 120259 (2020).DOI
- [42]N. Garceau, S. Bao, W. Guo, and S. Van Sciver, The design and testing of a liquid helium cooled tube system for simulating sudden vacuum loss in particle accelerators, Cryogenics 100, 92 (2019).DOI
- [43]N. Garceau, S. Bao, and W. Guo, Heat and mass transfer during a sudden loss of vacuum in a liquid helium cooled tube - Part I: Interpretation of experimental observations, Int. J. Heat Mass Transf. 129, 1144 (2019).DOI
- [44]S. Bao, N. Garceau, and W. Guo, Heat and mass transfer during a sudden loss of vacuum in a liquid helium cooled tube - Part II: Theoretical modeling, Int. J. Heat Mass Transf. 146, 118883 (2020).DOI
- [45]N. Garceau, S. Bao, and W. Guo, Heat and mass transfer during a sudden loss of vacuum in a liquid helium cooled tube - Part III: Heat deposition in He II, Int. J. Heat Mass Transf. 181, 121885 (2021).DOI