WorksPhysics and Astronomy
Model-free stiffness measurement of microscale soft contacts by far-field traction force microscopy
Abstract
The microscale stiffness of soft materials governs their contact mechanics, adhesion and friction, yet it is surprisingly difficult to measure. Micro or nanoindentation is typically used, but extracting stiffness from these measurements requires using contact mechanics models (e.g. JKR), whose assumptions often break down for soft adhesive contacts. Here, we introduce far-field traction force microscopy (FF-TFM) to extract stiffness without using any contact model. We drag a colloidal probe mounted on an atomic-force microscope across a soft surface, measuring the friction force while imaging the displacements of fluorescent tracers on the substrate. Far from the contact, in the elastic limit, these lateral displacements depend solely on the friction force and the substrate stiffness, and fitting them with the point-force solution thus gives the substrate's Young's modulus directly. We successfully match bulk rheology moduli with FF-TFM for six different silicone elastomers, where JKR fits to indentation data underestimate moduli by as much as 40% of their bulk values. Our approach also enables tracking how the probe slips across the surface. We find that soft contacts can "pre-slip" with no detectable signature in the force signal, unlike stiffer contacts. FF-TFM thus offers a contact-model-free route to measuring microscale stiffness and slip behavior in soft materials.