betaFeedback

WorksMathematics

A nonlocal curve evolution for an immersed elastic filament: global existence and convergence to resistive force theory

Abstract

We consider a nonlocal curve evolution belonging to a hierarchy of models for the dynamics of an inextensible elastic filament in a 3D Stokes fluid. This model captures the principal part of a full free boundary problem for an elastic filament in Stokes flow. The fluid effects on the filament evolution are encoded in a pseudodifferential force-to-velocity operator which may be regarded as an interpolation between resistive force theory at low wavenumbers and a Stokes boundary value problem at high wavenumbers. Here the curve is considered to be the centerline of a 3D filament with constant cross sectional radius ε>0ε>0. We show global well-posedness for the curve evolution in the natural energy space. This loosely suggests that the full evolution may be globally well-posed if the large-scale geometry is controlled. Furthermore, we prove convergence to resistive force theory dynamics as ε→0ε\to 0, which illustrates how resistive force theory emerges from more detailed models.

Introduction

We consider a nonlocal curve evolution approximating the motion of an inextensible elastic filament immersed in a Stokes fluid in R3\mathbb{R}^3. Our model belongs to a family of curve evolution equations arising in the following way. The thin filament is treated as a rod with rigid cross sections of constant radius 0<ϵ≪10 < \epsilon\ll1 whose centerline X(s,t):T×[0,T]→R3\mathbf{X}(s,t): \mathbb{T} \times[0,T] \to\mathbb{R}^3 for T:=R/Z\mathbb{T} := \mathbb{R}/\mathbb{Z} deforms subject to a 1D elasticity law (Figure 1). Here the elastic force density

f(s)=(Xsss−τXs)s,(⋅)s:=∂∂s,(1)\mathbf{f}(s) = \left(\mathbf{X}_{sss} - \tau\mathbf{X}_s\right)_s,\qquad(\cdot)_s := \frac{\partial}{\partial s}, \tag*{(1)}

along the filament centerline comes from Euler-Bernoulli beam theory [3, 4, 14, 40, 42, 43], with the tension τ(s,t)\tau(s,t) serving as a Lagrange multiplier to enforce the local inextensibility constraint ∣Xs∣2=1\lvert\mathbf{X}_s\rvert^2 = 1. The elastic forcing is coupled to the filament motion via a force-to-velocity map

Lϵ(X): f(s)↦v(s)(2)\mathcal{L}_{\epsilon}(\mathbf{X}):\ \mathbf{f}(s) \mapsto\mathbf{v}(s) \tag*{(2)}

which incorporates the effects of the surrounding Stokes fluid. Models in this family are essentially distinguished by the level of detail with which the fluid effects are included in the map Lϵ(X)\mathcal{L}_{\epsilon}(\mathbf{X}). The position of the curve then evolves according to an equation of the form

∂X∂t=−Lϵ(X)[(Xsss−τXs)s],∣Xs∣2=1.(3)\frac{\partial\mathbf{X}}{\partial t} = -\mathcal{L}_{\epsilon}(\mathbf{X})\left[(\mathbf{X}_{sss} - \tau\mathbf{X}_s)_s\right],\qquad\lvert\mathbf{X}_s\rvert^2 = 1. \tag*{(3)}
Immersed 3D filament centerline with cross-sectional radius

Figure 1. We consider X(s,t)\mathbf{X}(s,t) as the centerline of an immersed 3D filament with constant cross sectional radius 0<ϵ≪10 < \epsilon\ll1.

The simplest choice of force-to-velocity map which still incorporates meaningful hydrodynamic effects is the resistive force theory (local slender body theory) [12, 16, 18, 37] approximation

Lϵ,RFT(X)=∣log⁡ϵ∣4π(I+Xs⊗Xs).(4)\mathcal{L}_{\epsilon,\mathrm{RFT}}(\mathbf{X}) = \frac{|\log\epsilon|}{4\pi}\left(\mathbf{I}+\mathbf{X}_s\otimes\mathbf{X}_s\right). \tag*{(4)}

The map Lϵ,RFT\mathcal{L}_{\epsilon,\mathrm{RFT}} includes only the leading order O(∣log⁡ϵ∣)O(|\log\epsilon|) effect of the surrounding viscous fluid on the filament, resulting in a local force-to-velocity operator. The main feature of Lϵ,RFT\mathcal{L}_{\epsilon,\mathrm{RFT}} is a drag anisotropy weighting the viscous drag in the tangential (Xs\mathbf{X}_s) direction along the filament twice as much as in the normal directions. This drag anisotropy is a simple but important nonlinear effect that, among other consequences, allows for net displacement (swimming) of the filament. Resistive force theory models of elastohydrodynamics are therefore useful for understanding undulatory swimming at low Reynolds number [7, 5, 8, 9, 15, 25, 23, 22, 39, 24, 29, 34]. These local dynamics also serve as a useful testing ground for efficient numerical implementations of inextensibility [27, 13, 41].

Resistive force theory is an important member of the immersed filament modeling hierarchy, but for certain applications, its treatment of hydrodynamic effects is overly simplistic. A natural, more detailed candidate for a force-to-velocity map Lϵ\mathcal{L}_{\epsilon} is nonlocal slender body theory1 [19, 17, 40]:

Lϵ,nloc[f](s)=18π[(I−3Xs⊗Xs)−2(I+Xs⊗Xs)log⁡(πϵ4)]f(s)+18π∫T[(I∣X^∣+X^⊗X^∣X^∣3)f(s′)−I+Xs⊗Xs∣sin⁡(π(s−s′)/π)∣f(s)] ds′.(5)\begin{aligned} \mathcal{L}_{\epsilon,\mathrm{nloc}}[f](s)={}&\frac{1}{8\pi}\left[\left(\mathbf{I}-3\mathbf{X}_s\otimes\mathbf{X}_s\right)-2\left(\mathbf{I}+\mathbf{X}_s\otimes\mathbf{X}_s\right)\log\left(\frac{\pi\epsilon}{4}\right)\right]f(s)\\ &+\frac{1}{8\pi}\int_{\mathbb{T}}\left[\left(\frac{\mathbf{I}}{|\widehat{\mathbf{X}}|}+\frac{\widehat{\mathbf{X}}\otimes\widehat{\mathbf{X}}}{|\widehat{\mathbf{X}}|^3}\right)f(s')-\frac{\mathbf{I}+\mathbf{X}_s\otimes\mathbf{X}_s}{\left|\sin\left(\pi(s-s')/\pi\right)\right|}f(s)\right]\,ds'. \tag*{(5)} \end{aligned}

where X^=X(s)−X(s′)\widehat{\mathbf{X}}=\mathbf{X}(s)-\mathbf{X}(s'). We mention this operator due to its numerical utility; however, due to well-known issues [11, 40, 38, 28] at high wavenumbers ∼1ϵ\sim\frac{1}{\epsilon}, an evolution of the form (3) using Lϵ,nloc\mathcal{L}_{\epsilon,\mathrm{nloc}} is ill-posed, even at analytic regularity.

We thus turn to arguably the most detailed choice of force-to-velocity map suitable for (3): the slender body Neumann-to-Dirichlet (NtD) map, introduced by the author together with Mori and Spirn in [30, 31]. The slender body NtD map comes from solving the slender body boundary value problem for 3D Stokes flow about a filament of radius ϵ>0\epsilon>0 using force data defined on a curve. The full definition of the slender body NtD map, which we will denote by Lϵ,NtD\mathcal{L}_{\epsilon,\mathrm{NtD}}, appears in section 1.3. The evolution (1.3) using Lϵ,NtD\mathcal{L}_{\epsilon,\mathrm{NtD}} gives rise to the slender body free boundary problem, a curve evolution in which the fluid surrounding the 3D filament exactly satisfies a Stokes boundary value problem at each moment in time. In [35, 33], we showed that the principal behavior of Lϵ,NtD\mathcal{L}_{\epsilon,\mathrm{NtD}} about a curved filament is captured by the slender body NtD map about a straight cylinder, for which we derived an explicit symbol in [28]. From this decomposition, in [36], we showed that the slender body free boundary problem is locally well-posed in C4,α(T)C^{4,\alpha}(\mathbb{T}). Questions of global well-posedness and long-time convergence to equilibrium remain completely open.

This brings us to the curve evolution studied in this paper. Here we consider a natural and novel intermediate model of the form (1.3) between the full slender body free boundary problem (1.26) and the classical resistive force theory model (1.18). Our choice of the force-to-velocity map, which we will denote by Lϵ\mathcal{L}_{\epsilon}, is a pseudodifferential operator whose symbol in the tangential and normal directions to the filament centerline is the explicit Fourier multiplier corresponding to the exact slender body NtD map about a straight cylinder. In particular, we simply apply the straight map to a curved filament (see Definition 1.1). At low wavenumbers, the map behaves like multiplication by ∣log⁡ϵ∣|\log\epsilon|, with the tangential direction along the filament weighted twice as much as the normal directions. At high wavenumbers ∣k∣≳1ϵ|k| \gtrsim\frac{1}{\epsilon}, the map behaves like multiplication by (ϵ∣k∣)−1(\epsilon|k|)^{-1} on the Fourier side, i.e., a (scaled) inverse derivative. In a sense, the force-to-velocity map Lϵ\mathcal{L}_{\epsilon} interpolates between resistive force theory at low wavenumbers and the full slender body NtD map at high wavenumbers.

Our aim is twofold: (I.) We seek to probe the global well-posedness question for the full slender body free boundary problem (1.26) by replacing Lϵ,NtD\mathcal{L}_{\epsilon,\mathrm{NtD}} with its principal part. Here we prove global well-posedness for (1.3) using the map L‾ϵ\overline{\mathcal{L}}_{\epsilon} in the natural energy space. One caveat is that we treat (1.3) with L‾ϵ\overline{\mathcal{L}}_{\epsilon} as a pure curve evolution and do not worry about self-intersection of the filament. While self-intersection would lead to breakdown of the full free boundary problem, we can continue to make sense of the model with L‾ϵ\overline{\mathcal{L}}_{\epsilon} even if the filament passes through itself. Self-intersection is inherently a low-wavenumber phenomenon, and at low wavenumbers, L‾ϵ\overline{\mathcal{L}}_{\epsilon} looks like resistive force theory rather than Lϵ,NtD\mathcal{L}_{\epsilon,\mathrm{NtD}}. However, our global well-posedness result for (1.3) using L‾ϵ\overline{\mathcal{L}}_{\epsilon} loosely suggests that if the large-scale geometry of the full slender body free boundary evolution remains under control, then the full free boundary problem should be globally well-posed.

(II.) In addition, we seek to illustrate how resistive force theory dynamics using Lϵ,RFT\mathcal{L}_{\epsilon,\mathrm{RFT}} emerge from more detailed models in the singular limit ϵ→0+\epsilon\to0^{+}. We prove that the evolution (1.3) with L‾ϵ\overline{\mathcal{L}}_{\epsilon} converges to the resistive force theory evolution with Lϵ,RFT\mathcal{L}_{\epsilon,\mathrm{RFT}} as the radius parameter ϵ→0\epsilon\to0, thereby establishing the first rigorous dynamical connection between different levels of the curve evolution hierarchy. The convergence is at an expected but very slow logarithmic-in-ϵ\epsilon rate, since (1.4) only captures the very leading order local effects of the Stokes fluid on the filament. The slow convergence does make the proof delicate, as there is no room for waste.

In [1], we recognize (1.3) with Lϵ,RFT\mathcal{L}_{\epsilon,\mathrm{RFT}} as a gradient flow of the filament bending energy 12∫T∣Xss∣2 ds\frac{1}{2}\int_{\mathbb{T}}|\mathbf{X}_{ss}|^{2}\,ds, which allows us to show long-time convergence to 3D Euler elasticae, the critical points of the bending energy. The evolution with L‾ϵ\overline{\mathcal{L}}_{\epsilon} is also a gradient flow of the bending energy with respect to the metric

⟨V,U⟩:=⟨L‾ϵ−1V,U⟩L2(T)(6)\langle V,U\rangle:= \langle\overline{\mathcal{L}}_{\epsilon}^{-1}V,U\rangle_{L^{2}(\mathbb{T})} \tag*{(6)}

defined on perturbations V,UV,U of an inextensible curve X\mathbf{X}. We may thus frame our convergence result as that of two different gradient flows for the same energy whose metrics converge as ϵ→0\epsilon\to0.

The force-to-velocity map

1.1. The force-to-velocity map. We now define the force-to-velocity map L‾ϵ\overline{\mathcal{L}}_{\epsilon} used in (1.3). Given h(s):T→R3h(s):\mathbb{T}\to\mathbb{R}^{3} defined along a filament centerline X\mathbf{X}, we denote the projection of hh onto the tangential and normal directions about XX as

PXsh=(Xs⋅h)Xs,PXs⊥h=h−PXsh.(7)\mathbb{P}_{X_s}h=(X_s\cdot h)X_s,\qquad\mathbb{P}_{X_s}^{\perp}h=h-\mathbb{P}_{X_s}h. \tag*{(7)}

In addition, we denote the Fourier transform of hh by

F[h(s)](k)=∫Th(s)ei2πks ds.(8)\mathcal{F}[h(s)](k)=\int_{\mathbb{T}}h(s)e^{i2\pi ks}\,ds. \tag*{(8)}

Given a scalar-valued Fourier multiplier m(k)m(k), we will use the notation TmT_m to denote the operator

Tmh=F−1[mF[h]].(9)T_mh=\mathcal{F}^{-1}[m\mathcal{F}[h]]. \tag*{(9)}

References

  1. [1]D. Albritton and L. Ohm. Rods in flows: the PDE theory of immersed elastic filaments. arXiv preprint arXiv:2503.14440, 2025.arxiv.org/abs/2503.14440
  2. [2]H. Brezis and P. Mironescu. Gagliardo–nirenberg inequalities and non-inequalities: The full story. Annales de l’Institut Henri Poincaré C, Analyse non linéaire, 35(5):1355–1376, 2018.
  3. [3]S. Camalet and F. Jülicher. Generic aspects of mechanical beating. New Journal of Physics, 2(1):24, 2000.DOI
  4. [4]S. Camalet, F. Jülicher, and J. Prost. Self-organized beating and swimming of internally driven filaments. Physical review letters, 82(7):1590, 1999.DOI
  5. [5]Y. El-Aloui-Faris, J.-B. Pomet, S. Régnier, and L. Giraldi. Optimal actuation of flagellar magnetic microswimmers. Physical Review E, 101(4):042604, 2020.
  6. [6]W. Fenchel. On the differential geometry of closed space curves. Bulletin of the AMS, 57, 1951.DOI
  7. [7]B. M. Friedrich, I. H. Riedel-Kruse, J. Howard, and F. Jülicher. High-precision tracking of sperm swimming fine structure provides strong test of resistive force theory. Journal of Experimental Biology, 213(8):1226–1234, 2010.DOI
  8. [8]H. Gadêlha, E. Gaffney, D. Smith, and J. Kirkman-Brown. Nonlinear instability in flagellar dynamics: a novel modulation mechanism in sperm migration? Journal of The Royal Society Interface, 7(53):1689–1697, 2010.DOI
  9. [9]H. Gadêlha and E. A. Gaffney. Flagellar ultrastructure suppresses buckling instabilities and enables mammalian sperm navigation in high-viscosity media. Journal of The Royal Society Interface, 16(152):20180668, 2019.DOI
  10. [10]E. García-Juárez, P.-C. Kuo, and Y. Mori. The immersed inextensible interface problem in 2d stokes flow. SIAM Journal on Mathematical Analysis, 57(4):3454–3487, 2025.
  11. [11]T. Götz. Interactions of fibers and flow: asymptotics, theory and numerics. Doctoral dissertation, University of Kaiserslautern, 2000.
  12. [12]J. Gray and G. Hancock. The propulsion of sea-urchin spermatozoa. J. Exp. Biol., 32(4):802–814, 1955.DOI
  13. [13]A. L. Hall-McNair, T. D. Montenegro-Johnson, H. Gadêlha, D. J. Smith, and M. T. Gallagher. Efficient implementation of elastohydrodynamics via integral operators. Physical Review Fluids, 4(11):13101, 2019.DOI
  14. [14]M. Hines and J. Blum. Bend propagation in flagella. i. derivation of equations of motion and their simulation. Biophysical Journal, 23(1):41–57, 1978.pubmed.ncbi.nlm.nih.gov/667306
  15. [15]S. Hu, J. Zhang, and M. J. Shelley. Enhanced clamshell swimming with asymmetric beating at low reynolds number. Soft Matter, 2022.arxiv.org/abs/2203.02379
  16. [16]R. Johnson and C. Brokaw. Flagellar hydrodynamics. a comparison between resistive-force theory and slender-body theory. Biophysical journal, 25(1):113–127, 1979.pubmed.ncbi.nlm.nih.gov/262381
  17. [17]R. E. Johnson. An improved slender-body theory for Stokes flow. J. Fluid Mech., 99(02):411–431, 1980.DOI
  18. [18]J. B. Keller and S. Rubinow. Swimming of flagellated microorganisms. Biophysical Journal, 16(2):151–170, 1976.pubmed.ncbi.nlm.nih.gov/1247645
  19. [19]J. B. Keller and S. I. Rubinow. Slender-body theory for slow viscous flow. J. Fluid Mech., 75(4):705–714, 1976.DOI
  20. [20]N. Koiso. On the motion of a curve towards elastica. Actes de la Table Ronde de Géométrie Différentielle (Luminy, 1992), 1:403–436, 1996.
  21. [21]P.-C. Kuo, M.-C. Lai, Y. Mori, and A. Rodenberg. The tension determination problem for an inextensible interface in 2d stokes flow. Research in the Mathematical Sciences, 10(4):46, 2023.arxiv.org/abs/2302.05062
  22. [22]E. Lauga. Floppy swimming: Viscous locomotion of actuated elastica. Physical Review E, 75(4):041916, 2007.pubmed.ncbi.nlm.nih.gov/17500930
  23. [23]E. Lauga and C. Eloy. Shape of optimal active flagella. Journal of Fluid Mechanics, 730, 2013.DOI
  24. [24]E. Lauga and T. R. Powers. The hydrodynamics of swimming microorganisms. Reports on Progress in Physics, 72(9):096601, 2009.DOI
  25. [25]T. Montenegro-Johnson, H. Gadelha, and D. J. Smith. Spermatozoa scattering by a microchannel feature: an elastohydrodynamic model. Royal Society Open Science, 2(3):140475, 2015.
  26. [26]C. Moreau, F. Alouges, A. Lefebvre-Lepot, and J. Levillain. The n-link model for slender rods in a viscous fluid: well-posedness and convergence to classical elastohydrodynamics equations. HAL Id: hal-04944051, 2025.arxiv.org/abs/2502.09988
  27. [27]C. Moreau, L. Giraldi, and H. Gadêlha. The asymptotic coarse-graining formulation of slender-rods, bio-filaments and flagella. Journal of the Royal Society Interface, 15(144):20180235, 2018.DOI
  28. [28]Y. Mori and L. Ohm. Accuracy of slender body theory in approximating force exerted by thin fiber on viscous fluid. Studies in Applied Mathematics, 2021.arxiv.org/abs/2008.06829
  29. [29]Y. Mori and L. Ohm. Well-posedness and applications of classical elastohydrodynamics for a swimming filament. Nonlinearity, 36(3):1799, 2023.DOI
  30. [30]Y. Mori, L. Ohm, and D. Spirn. Theoretical justification and error analysis for slender body theory. Communications on Pure and Applied Mathematics, 73(6):1245–1314, 2020.arxiv.org/abs/1807.00178
  31. [31]Y. Mori, L. Ohm, and D. Spirn. Theoretical justification and error analysis for slender body theory with free ends. Archive for Rational Mechanics and Analysis, 235(3):1905–1978, 2020.DOI
  32. [32]D. Öelz. On the curve straightening flow of inextensible, open, planar curves. SeMA Journal, 54(1):5–24, 2011.DOI
  33. [33]L. Ohm. A free boundary problem for an immersed filament in 3D Stokes flow. arXiv preprint arXiv:2404.04737, 2024.arxiv.org/abs/2404.04737
  34. [34]L. Ohm. Well-posedness of a viscoelastic resistive force theory and applications to swimming. Journal of Nonlinear Science, 34(5):82, 2024.arxiv.org/abs/2209.14160
  35. [35]L. Ohm. On an angle-averaged Neumann-to-Dirichlet map for thin filaments. Archive for Rational Mechanics and Analysis, 249(1):8, 2025.arxiv.org/abs/2308.06592
  36. [36]L. Ohm. The slender body free boundary problem. arXiv preprint arXiv:2509.16800, 2025.arxiv.org/abs/2509.16800
  37. [37]O. Pironneau and D. Katz. Optimal swimming of flagellated micro-organisms. Journal of Fluid Mechanics, 66(2):391–415, 1974.DOI
  38. [38]M. J. Shelley and T. Ueda. The Stokesian hydrodynamics of flexing, stretching filaments. Physica D: Nonlinear Phenomena, 146(1-4):221–245, 2000.DOI
  39. [39]S. E. Spagnolie and E. Lauga. The optimal elastic flagellum. Physics of Fluids, 22(3):455, 2010.DOI
  40. [40]A.-K. Tornberg and M. J. Shelley. Simulating the dynamics and interactions of flexible fibers in Stokes flows. Journal of Computational Physics, 196(1):8–40, 2004.DOI
  41. [41]B. J. Walker, K. Ishimoto, and E. A. Gaffney. Efficient simulation of filament elastohydrodynamics in three dimensions. Physical Review Fluids, 5(12):123103, 2020.
  42. [42]C. H. Wiggins and R. E. Goldstein. Flexive and propulsive dynamics of elastica at low reynolds number. Physical Review Letters, 80(17):3879, 1998.DOI
  43. [43]C. H. Wiggins, D. A. Ott, and R. E. Goldstein. Trapping and wiggling: elastohydrodynamics of driven microfilaments. Biophysical Journal, 74(2):1043–1060, 1998.pubmed.ncbi.nlm.nih.gov/9533717

Paper details

vlnc:W_8h78dwn9
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 5

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Mathematics

Not recorded for this paper

View statement
Looking for related papers…
Contents