WorksPhysics and Astronomy
Electronic structures and stability investigation of the new class of large band gap topological insulators MTlTe (M = Cd, Hg)
Abstract
By means of ternary chemical potential phase diagram and phonon spectrum calculations, we propose that TlTe ( = Cd, Hg), the derivatives of TlTe, are thermodynamically and dynamically stable in the body centered tetragonal crystal structure with 4/ symmetry. Our electronic structures calculations confirm that a robust - band inversion occurs near the Fermi level in TlTe, and a topological band gap about 0.13 eV in CdTlTe is induced by the spin-orbit coupling. These results suggest that TlTe are a new class of large band gap 3D strong topological insulators that are stable and synthesizable in experiments, which could be used to design efficient spin torque equipment and spin device.
Introduction
In the past two decades, topological electronic materials, including topological insulators (TIs) [1, 2, 3, 4, 5], topological semimetals [6, 7, 8, 9, 10, 11, 12, 13, 14], and topological superconductors(SC) [5, 15, 16, 17, 18, 19, 20], have attracted great interest and reshaped perception of the materials. In particular, large band gap three-dimensional (3D) TIs have many intriguing properties in both fundamental physics [21, 22, 23] and device applications [24, 25, 26, 27, 28]. TIs with the spin momentum locked surface states are robust against perturbations, and thus have high performance on the spin torque [29, 30], topotronic [31, 32] and spintronic devices [33, 34]. Furthermore, many exotic topological states are realized by modulating the TIs. For example, the quantum anomalous Hall (QAH) effect has been achieved by the magnetic doping in films [35, 36, 37, 38, 39, 40, 41, 42]. Besides, topological superconductivity is reported in the Cu-intercalated () [17, 18, 43, 44], under high pressure [45] and TI/SC heterostructures [46]. However, easily synthesized TIs with relatively large band gap and clear two-dimensional (2D) Dirac-cone surface states as the family [33, 34, 40, 47, 48, 49] remain rare until now. Therefore, it is desirable to search for large band gap 3D TIs for potential utilizations.
First-principles calculations have played remarkable roles in the development of topological physics and topological materials. Many topological materials are predicted by first-principles calculations firstly, and then confirmed by experiments, including HgTe quantum well [2, 50], bismuth antimony alloy [22, 51, 52], -family of TIs [33, 34, 40, 47, 48, 49], topological crystalline insulator (TCI) [13, 14], topological semimetals [6, 7, 11, 12, 53, 54, 55, 56, 57, 58, 59] and so on. Recently, [60] has been found to be a topological material that host Dirac surface states at 0.5 eV above the Fermi level (). After then, by using site substitution, many derivatives ( Cu, Sn, Mo, Pb, Bi, Sb, La, Nd, Sm, Gd, Tb, Dy, Er, Tm) [61, 62, 63, 64, 65] have been experimentally synthesized and reported. Among them, with 8-electron configuration is expected to be a TI. Unfortunately, the band inversion in disappears so that it becomes a trivial insulator [66, 67].
Inspired by the above understanding, we propose that and are a new class of large band gap 3D strong topological insulators that are stable and synthesizable experimentally, through the site substitution of Cd or Hg. For this purpose, ternary chemical potential phase diagram with precursors and convex hull diagram are constructed. Both of them demonstrate that is thermodynamically stable and easily synthesized in Cd-rich, -rich and Tl-poor condition. The phonon spectrum reveal that adopts the body centered tetragonal structure with symmetry. Further electronic structures calculations identify that a robust band inversion between Cd-5s and Te-5p orbitals exists at point even without spin-orbit coupling (SOC). When SOC is considered, a topological band gap about 0.13 eV is induced in , which is larger than the energy scale of room temperature in theory. As a result, one single Dirac cone formed by the topological surface states is discovered at point of the surface. The corresponding left-hand momentum locking texture is also studied, which can be applied on the efficient spin torque equipment and spin device design. Finally, the topological electronic structures and stability of the other derivative are discussed, which is expect to possesses the same crystal structure and strong TI nature as .
Crystals structures and methodology
In our work, the same crystal structure of , i.e., the body centered tetragonal phase with space group (No. 140, ) as shown in Figure 1(a), is used for the calculation of ( Cd, Hg). The corresponding first Brillouin zone (BZ) [68] and its projection on the (100) surface of the primitive cell are displayed in Figure 1(c). In Figure 1(a), atom locates at Wyckoff position 4c (0.5, 0.5, 0.0) which is the center of the corner-sharing octahedron; Tl is located at 16l (, 0.5 + , ); two types of Te locate at 4a (0.5, 0.5, 0.25) and 8h (, + 0.5, 0.0). The lattice parameters, atomic coordinates , and are fully relaxed. The detailed structure information of is summarized in Table I. Besides, all the compounds used in our ternary phase diagram calculation are based on their ground phase in experiment, and their crystal parameters are fully relaxed as tabulated in Tabel. I to make the energies comparable.
Figure 1. (a) The unit cell of . (b) Top view of the unit cell. (c) Bulk BZ and its projection to the (100) surface of its primitive cell. High symmetry path is indicated.
Our first-principles calculations are performed by the Vienna ab initio simulation package [69, 70] with the projected augmented wave method [71]. The energy cutoff is set as 400 eV, and -meshes are adopted. Local-density approximation (LDA) type of the exchange-correlation potential [72] is used in all calculations. All the different compositions are fully relaxed until the Hellmann-Feynman forces on each atom are less than 0.01 eV/ and the total energy converge up to eV. The ternary phase diagram is constructed by calculating the total energy of without SOC. The phonon spectrum calculations are carried out by the PHONOPY code [73] with a supercell through the density-functional perturbation theory approach [74]. The band inversion is further confirmed by the modified Becke-Johnson (MBJ) potential [75] with the MBJ parameter setting as 1.35. We note that is usually used for semiconductors including IIB-VIA compounds as proposed by Tran and Blaha [75, 76]. Its reliability and accuracy have been identified to be at the same level as the hybrid functional [77] and GW methods [78] for a wide variety of semiconductors [76, 79, 80, 81, 82, 83, 84, 85]. The maximally localized Wannier functions are constructed by the Wannier90 package [86] based on the MBJ+SOC calculations. The surface states are calculated by iterative Green’s function method as implemented in the WannierTools package [87].
III The stability of CdTl4Te3
In this section, we would like to take as example to study its thermodynamical and dynamical stability. By choosing three stable compounds , and as the precursor materials, the target compound can be synthesized by the following reaction:
A phase diagram as function of the precursors chemical potentials could determine the ranges of the experimental synthesis condition within which the target compound can be stabilized and within which the undesired competing phases are formed by varying the composition of precursors [88, 89, 90, 91, 92, 93]. In general, the synthesis process can be understood as the exchange of elemental components between precursors and the forming phases. Therefore, the formation energies of all forming compounds could be expressed as:
where (i) = (i) - (i) with i = Cd, Tl and are the chemical potentials of the precursors referenced to the total energy of their ground states. Therefore, Eq. (2) makes a connection between and experimental condition, which means a rich condition of the corresponding precursor if is close to zero, and a poor condition if has a large negative value. Based on our calculation, the formation energy of is -1.032 eV/formula with respect to the precursors, which leads to two requirements for the chemical potentials. One is that each could only vary between 0 and -1.032 eV. The other is that there are only two independent variable chemical potentials. Therefore, the phase diagram can be visualized by a 2D graph with variables and as shown in Figure 2(a).
Figure 2. (a) The ternary phase diagram of CdTlTe with respect to the chemical potentials of Cd, TlTe and Tl, . (b) The Phonon dispersion curves of CdTlTe without SOC.
The competing phases such as , , , and Te are considered. Their formation energies with respect to the precursors are calculated and listed in Table II. Then the phase diagram of as function of the chemical potentials , and is constructed in Figure 2(a) by using a general scheme [89, 90, 93]. More details are described in supplementary material (SM) [94]. Yielding to the constraint eV, the whole allowed chemical potential region is restricted in the triangle surrounded by (blue solid line), (green solid line) and (black solid line). Our results reveal that is most stable against to other competing compounds in the orange region manifested by the phase separation lines , , and . Here, is the chemical potential of competing phase that is the function of precursor’s chemical potentials. The competing phase CdTlTe will precipitate out at , and become unstable with a negative value. These results clearly demonstrate that CdTlTe is easy to synthesize at Cd-rich, TlTe-rich and Tl-poor condition. We would like to recall that the abundance of precursors is relative yielding to eV and Eq. (2). By increasing along the black arrow in Figure 2(a), it means that Tl grows more and more rich while Cd and TlTe become poor. When the arrow cross and lines, CdTlTe becomes unstable accompanied with the precipitation of TlTe and CdTlTe, and the following decomposition will take place,
According to our calculations, the energy of the right products is 0.234 eV and 0.564 eV higher than that of left, respectively.
The convex hull analysis is another useful method to investigate the thermodynamical stability [95, 96]. In this way, the formation energy of all possible atomic configurations with respect to constituent elements needs to be calculated, which is defined as . Using this definition, our calculations demonstrate that CdTlTe is thermodynamically stable against to elements with formation energy of -0.213 eV/atom. With all possible as listed in Table II, the convex hull diagram is constructed in Fig. S1 [94], which shows that only the binary compounds are on the convex hull, and all ternary compounds such as CdTlTe and CdTlTe are within a viable energy window for potentially metastable phases. Even so, we estimate that CdTlTe is potentially synthesizable based on the following facts. One is that CdTlTe is just a little above the convex hull with small energy and even 0.020 eV/atom lower than CdTlTe. Since CdTlTe has already been synthesized in 1969 [97], it is expected that CdTlTe is highly feasible in proper condition, especially at Cd-rich, TlTe-rich and Tl-poor condition in the reaction Eq. (2).
To further check the dynamical stability of CdTlTe, the phonon spectrum based on the body centered tetragonal phase with symmetry is calculated. As shown in Figure 2(b), there is no phonon mode with negative frequency in the entire BZ, which indicates that CdTlTe is dynamically stable by adopting the body centered tetragonal structure. The above thermodynamical and dynamical investigations strongly demonstrate that CdTlTe is readily synthesized in experiment.
Electronic properties of CdTl4Te3
The projected density of states (PDOS) of tetragonal CdTlTe are calculated and plotted. As shown in Figure 3(a), Tl-6s orbitals mainly contribute to the states
Figure 3. The electronic properties of CdTlTe. (a) The projected DOS without SOC. (b) The fatted bands with spectral weight of Cd-5s(red), Te-5p(green) and Tl-6p(blue) orbitals without SOC. (c) The band structures with MBJ by including SOC.
| Compounds | Space group | (Å) | Atomic coordinates (fractional) |
| Cd | Cd ( 0.25) | ||
| Tl | Tl ( 0.25) | ||
| Te | Te (0.2879 0 ) | ||
| CdTe | Cd (0 0 0.0); Te (0.25 0.25 0.25) | ||
| TlTe | Tl (0.0783 0.2300 0.0); Te (0.1663 0.6636 0.25); Te2 (0.0 0.5 0.0); Te3 (0.0 0.0 0.25) | ||
| TlTe | ; ; | Tl1 (0.8947 0.6452 0.5521); Te1 (0.6817 0.6379 0.0860); Te2 (0.0 0.8703 0.25) | |
| CdTlTe | Cd (0.0 0.0 0.0); Tl (0.0 0.0 0.5); Te ( 0.2236) | ||
| TlTe | Tl1 (0.5 0.5 0.0); Tl2 (0.1476 0.6476 0.1607); Te1 (0.5 0.5 0.25); Te2 (0.6565 0.1565 0.0) | ||
| CdTlTe | Cd (0.5 0.5 0.0); Tl (0.1452 0.6452 0.1651); Te1 (0.5 0.5 0.25); Te2 (0.6624 0.1624 0.0) | ||
| HgTlTe | Hg (0.5 0.5 0.0); Tl (0.1460 0.6460 0.1624); Te1 (0.5 0.5 0.25); Te2 (0.6599 0.1599 0.0) |
Table 1. Detailed crystallographic information of corresponding compounds used in Figure 2.
| Compounds | (eV) | (eV) | (eV) |
| Cd | -1.5037 | ||
| Tl | -2.9543 | ||
| Te | -3.8046 | 0.2237 | |
| TlTe | -17.9934 | -0.6709 | |
| CdTe | -6.0324 | -0.5004 | -0.7241 |
| TlTe | -7.1281 | -0.1455 | -0.3691 |
| TlTe | -28.0154 | -1.1591 | -1.8300 |
| CdTlTe | -12.8369 | -0.3224 | -0.7697 |
| CdTlTe | -26.4372 | -1.0315 | -1.7025 |
Table 2. The calculated energy/formula used in Figure 2.
between eV, while Tl-6p orbitals mainly contribute to the states above 0.3 eV. Considering the electronic configuration of Tl, we conclude that Tl favors +1 valence in CdTlTe, similar to valence of Tl atoms at 16l site in TlTe [63, 67]. The states in energy range of eV are approximately from Te-5p orbitals with admixing of Tl-6p and Cd-5s states, which implies that the bonding between Cd, Tl and Te is not the pure ionic bond but has sizable metal-metal bond characters. Figure 3(a) shows that the Cd-5s orbitals are almost empty and mainly contribute the states between eV. Therefore, we can understand the electron transfer roughly as follows. Each Tl atom donates one electron, and Cd atom donates two electrons to the Te-5p orbitals. As a result, CdTlTe is close to the electronic configuration of the atomic insulator with the full filled sub-shell of Te, Tl, Cd ions approximately.
However, we notice that the Cd-5s orbitals are very extended, which also exhibit considerable amplitude under the E, implying a band inversion between Cd-5s and Te-5p states. The character is further verified by the projected band structures in Figure 3(b), which clearly demonstrates that the Cd-5s states with even parity are lower 1.82 eV than Te-5p states with odd parity at point. The band inversion in CdTlTe is already occurred even without SOC and can be alternatively viewed as a consequence of the inert pair effect in chemistry, which is the propensity for the two electrons in the outermost orbital to remain unionized in heavier elements [98], just like that in HgTe [1, 2]. In Figure 3(b), when SOC is excluded, the band crossing points between Cd-5s and Te-5p can be protected by time reversal symmetry () and inversion symmetry () symmetry and form nodal rings as plotted in Fig. S2(a) [94]. Since LDA type exchange-correlation potential usually overestimates band inversion between valence and conduction bands, then MBJ [75] is employed. The amplitude of band inversion in LDA is reduced to 1.10 eV with MBJ calculations as shown in Fig. S2(b) [94]. Therefore, the band inversion in CdTlTe is robust against the functional potentials, and the more accurate calculation of LDA with MBJ semilocal exchange functional potential is adopted to investigate the electronic and topological properties in the following.
When SOC is considered, the nodal rings are all gapped, inducing a 0.13 eV band gap as shown in Figure 3(c), which is larger than the energy scale of room temperature theoretically. For insulators with , the topological invariant based on the Fu-Kane formula [99] can be characterized by the parity products () of the half numbers of the occupied states at eight time-reversal invariant momentum (TRIM) points (Kramers pairs have the same parities). As shown in Figure 1(b), there are one (0.0, 0.0, 0.0), one (0.5, 0.5, -0.5), two (0.0, 0.0, 0.5) and four (0.5, 0.0, 0.0) TRIM points in the first BZ. Therefore, only and could determine the topological property of the tetragonal CdTlTe, while the other TRIM points always give
the trivial products. Our calculations indicate and , and give rise to . These results are consistent with the band inversion analysis at point, and confirm that CdTlTe is a strong TI.
Topological properties of CdTlTe
We construct the maximally localized Wannier functions of Cd-5s, Te-5p and Tl-6p states to investigate the topological features more explicitly. The Wilson loop method [100] is used by calculating the evolution of Wannier charge centers for the occupied bands in k = 0 (Figure 4(a)) and k = planes (Figure 4(b)). The evolution lines cross the reference line(red dashed line) once time in Figure 4(a), indicating that the k = 0 plane corresponds to a quantum spin Hall system with non-trivial 2D topological invariant. The evolution lines cross the reference line(red dashed line) zero time in Figure 4(b), confirming that the k = plane is a trivial 2D system. These results combining with Wilson loops on other surface planes(Fig. S3) [94], give rise a complete topological index , which further confirm that CdTlTe fall into the strong TI phase. In Figure 4(c), we plot the surface electronic structures on the (100) surface by the iterative surface Green’s function method [101, 102]. Two robust surface states connect the valence and conduction bands and form a Dirac cone in the bulk gap at point due to the requirement of the . In Figure 4(d), we plot the Fermi surfaces of the Dirac cone at 0.02 eV and their spin orientation, which exhibits a left-hand spin texture enclosed a phase like that in BiSe [33], indicating a positive SOC in CdTlTe [103]. Such kind of spin momentum locking surface states have been reported that have very highly efficient performance on spin torque equipment [29, 30] and spin device [33, 34].
Figure 4. (a) The Wilson loops of plane () and (b) () plane. (c) Band structures projected onto the (100) surface. (d) Topological surface states with chemical potential at 0.02 eV and corresponding spin texture on the (100) surface.
Discussion and Conclusion
Considering that Hg is isoelectronic with Cd in the IIB group of the periodic table, HgTlTe is naturally expected to be stabilized into the same crystal structure of CdTlTe with similar electronic structures and topological property. By using the optimized structure parameters in Table I, the calculated formation energy of HgTlTe through the reaction Hg + 4Tl + 3Te HgTlTe is -1.459 eV with respect to elemental precursors. Limited by the stoichiometry, the products TlTe + HgTe + TlTe + Tl, TlTe + Hg + 2Tl, 3TlTe + Hg + Tl and 2TlTe + HgTe + 2Tl are taken into account by calculating the formation energy which are equal to -1.397, -0.671, -1.107, and -1.035 eV, respectively. Obviously, HgTlTe will be formed in the reaction because it is thermodynamically favourable. The MBJ calculated band structures are presented in Fig. S4 [94]. As expected, the Hg-5s state with even parity is lower 2.26 eV than Te-5p state with odd parity at point. Furthermore, 0.046 eV nontrivial band gap induced by SOC makes it a strong TI which is similar to CdTlTe.
In conclusion, we predict a new class of 3D topological insulators MTlTe ( = Cd, Hg) by using first-principles calculations. Our ternary chemical potential phase diagrams and phonon spectrum calculations demonstrate that MTlTe ( = Cd, Hg) are both thermodynamically and dynamically stable in the body centered tetragonal crystal structure with symmetry. Further electronic structures calculations confirm that the nontrivial band topology stems from the band inversion between -5s and Te-5p orbitals at point, and the SOC induced topological band gap is about 0.13 eV in CdTlTe which is larger than the energy scale of room temperature in theory. The isolated Dirac cone type surface states with left-hand helicity of the spin momentum locking texture is obtained in the (100) surface spectra at point. These results suggest that MTlTe are synthesizable and suitable for the study of efficient spin torque equipment and spin device, which should stimulate many experimental efforts in the future.
Acknowledgments
This work was supported by the National Key Research and Development Program of China (2018YFA0307000), and the National Natural Science Foundation of China (11874022).
References
- [1]X.-L. Qi, Y.-S. Wu, and S.-C. Zhang, Topological Quantization of the Spin Hall Effect in Two-Dimensional Paramagnetic Semiconductors, Phys. Rev. B 74, 085308 (2006).DOI
- [2]B. A. Bernevig, T. L. Hughes, and S.-C. Zhang, Quantum Spin Hall Effect and Topological Phase Transition in HgTe Quantum Wells, Science 314, 1757 (2006).
- [3]A. P. Schnyder, S. Ryu, A. Furusaki, and A. W. W. Ludwig, Classification of Topological Insulators and Superconductors in Three Spatial Dimensions, Phys. Rev. B 78, 195125 (2008).DOI
- [4]M. Z. Hasan and C. L. Kane, Topological Insulators, Rev. Mod. Phys. 82, 3045 (2010).DOI
- [5]X.-L. Qi and S.-C. Zhang, Topological Insulators and Superconductors, Rev. Mod. Phys. 83, 1057 (2011).DOI
- [6]X. Wan, A. M. Turner, A. Vishwanath, and S. Y. Savrasov, Topological Semimetal and Fermi-Arc Surface States in the Electronic Structure of Pyrochlore Iridates, Phys. Rev. B 83, 205101 (2011).DOI
- [7]G. Xu, H. Weng, Z. Wang, X. Dai, and Z. Fang, Chern Semimetal and the Quantized Anomalous Hall Effect in HgCr₂Se₄, Phys. Rev. Lett. 107, 186806 (2011).pubmed.ncbi.nlm.nih.gov/22107665
- [8]A. A. Burkov and L. Balents, Weyl Semimetal in a Topological Insulator Multilayer, Phys. Rev. Lett. 107, 127205 (2011).DOI
- [9]A. A. Zyuzin, S. Wu, and A. A. Burkov, Weyl Semimetal with Broken Time Reversal and Inversion Symmetries, Phys. Rev. B 85, 165110 (2012).DOI
- [10]S. M. Young, S. Zaheer, J. C. Y. Teo, C. L. Kane, E. J. Mele, and A. M. Rappe, Dirac Semimetal in Three Dimensions, Phys. Rev. Lett. 108, 140405 (2012).pubmed.ncbi.nlm.nih.gov/22540776
- [11]Z. Wang, Y. Sun, X.-Q. Chen, C. Franchini, G. Xu, H. Weng, X. Dai, and Z. Fang, Dirac Semimetal and Topological Phase Transitions in A₃Bi (A = Na, K, Rb), Phys. Rev. B 85, 195320 (2012).DOI
- [12]Z. Wang, H. Weng, Q. Wu, W. Dai, and Z. Fang, Three-Dimensional Dirac Semimetal and Quantum Transport in Cd₃As₂, Phys. Rev. B 88, 125427 (2013).DOI
- [13]T. H. Hsieh, H. Lin, J. Liu, W. Duan, A. Bansil, and L. Fu, Topological Crystalline Insulators in the SnTe Material Class, Nat. Commun. 3, 1 (2012).DOI
- [14]S.-Y. Xu, C. Liu, N. Alidoust, M. Neupane, D. Qian, I. Belopolski, J. P. Denlinger, Y. J. Wang, H. Lin, L. A. Wray, G. Landolt, B. Slomski, J. H. Dil, A. Marcinkova, E. Morosan, Q. Gibson, R. Sankar, F. C. Chou, R. J. Cava, A. Bansil, and M. Z. Hasan, Observation of a Topological Crystalline Insulator Phase and Topological Phase Transition in Pb₁−xSnₓTe, Nat. Commun. 3, 1192 (2012).
- [15]L. Fu and C. L. Kane, Superconducting Proximity Effect and Majorana Fermions at the Surface of a Topological Insulator, Phys. Rev. Lett. 100, 096407 (2008).
- [16]X.-L. Qi, T. L. Hughes, S. Raghu, and S.-C. Zhang, Time-Reversal-Invariant Topological Superconductors and Superfluids in Two and Three Dimensions, Phys. Rev. Lett. 102, 187001 (2009).pubmed.ncbi.nlm.nih.gov/19518900
- [17]Y. S. Hor, A. J. Williams, J. G. Checkelsky, P. Roushan, J. Seo, Q. Xu, H. W. Zandbergen, A. Yazdani, N. P. Ong, and R. J. Cava, Superconductivity in CuxBi₂Se₃ and its Implications for Pairing in the Undoped Topological Insulator, Phys. Rev. Lett. 104, 057001 (2010).DOI
- [18]L. Fu and E. Berg, Odd-Parity Topological Superconductors: Theory and Application to CuxBi₂Se₃, Phys. Rev. Lett. 105, 097001 (2010).pubmed.ncbi.nlm.nih.gov/20868184
- [19]G. Xu, B. Lian, P. Tang, X.-L. Qi, and S.-C. Zhang, Topological Superconductivity on the Surface of Fe-Based Superconductors, Phys. Rev. Lett. 117, 047001 (2016).DOI
- [20]X.-L. Qi, T. L. Hughes, and S.-C. Zhang, Topological Invariants for the Fermi Surface of a Time-Reversal-Invariant Superconductor, Phys. Rev. B 81, 134508 (2010).DOI
- [21]X.-L. Qi, T. L. Hughes, and S.-C. Zhang, Topological Field Theory of Time-Reversal Invariant Insulators, Phys. Rev. B 78, 195424 (2008).
- [22]D. Hsieh, Y. Xia, L. Wray, D. Qian, A. Pal, J. H. Dil, J. Osterwalder, F. Meier, G. Bihlmayer, C. L. Kane, Y. S. Hor, R. J. Cava, and M. Z. Hasan, Observation of Unconventional Quantum Spin Textures in Topological Insulators, Science 323, 919 (2009).
- [23]R. Li, J. Wang, X.-L. Qi, and S.-C. Zhang, Dynamical Axion Field in Topological Magnetic Insulators, Nat. Phys. 6, 284 (2010).DOI
- [24]G. Brumfiel, Topological Insulators: Star Material, Nature 466, 310 (2010).DOI
- [25]D. Pesin and A. H. MacDonald, Spintronics and Pseudospintronics in Graphene and Topological Insulators, Nat. Mater. 11, 409 (2012).DOI
- [26]A. Politano, L. Viti, and M. S. Vitiello, Optoelectronic Devices, Plasmonics, and Photonics with Topological Insulators, APL Materials 5, 035504 (2017).arxiv.org/abs/1904.00624
- [27]M. Ezawa, Topological Switch Between Second-Order Topological Insulators and Topological Crystalline Insulators, Phys. Rev. Lett. 121, 116801 (2018).DOI
- [28]H. Wu, A. Chen, P. Zhang, H. He, J. Nance, C. Guo, J. Sasaki, T. Shirokura, P. N. Hai, B. Fang, S. A. Razaivi, K. Wong, Y. Wen, Y. Ma, G. Yu, G. P. Carman, X. Han, X. Zhang, and K. L. Wang, Magnetic Memory Driven by Topological Insulators, Nat. Commun. 12, 6251 (2021).DOI
- [29]A. R. Mellnik, J. S. Lee, A. Richardella, J. L. Grab, P. J. Mintun, M. H. Fischer, A. Vaezi, A. Manchon, E. A. Kim, N. Samarth, and D. C. Ralph, Spin-transfer torque generated by a topological insulator, Nature 511, 449 (2014).
- [30]K. Kondou, R. Yoshimi, A. Tsukazaki, Y. Fukuma, J. Matsuno, K. S. Takahashi, M. Kawasaki, Y. Kuroda, and Y. Otani, Fermi-level-dependent charge-to-spin current conversion by Dirac surface states of topological insulators, Nat. Phys. 12, 1027 (2016).DOI
- [31]Q. Xu, Z. Song, S. Nie, H. Weng, Z. Fang, and X. Dai, Two-dimensional oxide topological insulator with iron-pnictide superconduct or LiFeAs structure, Phys. Rev. B 92, 205310 (2015).DOI
- [32]A.Q. Wang, X.-G. Ye, D.-P. Yu, and Z.-M. Liao, Topological Semimetal Nanostructures: From Properties to Topotronics, ACS Nano 14, 3755 (2020).DOI
- [33]H. Zhang, C.-X. Liu, X.-L. Qi, X. Dai, Z. Fang, and S.-C. Zhang, Topological Insulators in Bi₂Se₃, Bi₂Te₃ and Sb₂Te₃ with a Single Dirac Cone on the Surface, Nat. Phys. 5, 438 (2009).DOI
- [34]D. Hsieh, Y. Xia, D. Qian, L. Wray, J. Dil, F. Meier, J. Osterwalder, L. Patthey, J. Checkelsky, N. P. Ong et al., A Tunable Topological Insulator in the Spin Helical Dirac Transport Regime, Nature 460, 1101 (2009).DOI
- [35]F. D. M. Haldane, Model for a Quantum Hall Effect Without Landau Levels: Condensed-Matter Realization of the “Parity Anomaly”, Phys. Rev. Lett. 61, 2015 (1988).pubmed.ncbi.nlm.nih.gov/10038961
- [36]M. Onoda and N. Nagaosa, Quantized Anomalous Hall Effect in Two-Dimensional Ferromagnets: Quantum Hall Effect in Metals, Phys. Rev. Lett. 90, 206601 (2003).pubmed.ncbi.nlm.nih.gov/12785910
- [37]C.-X. Liu, X.-L. Qi, X. Dai, Z. Fang, and S.-C. Zhang, Quantum Anomalous Hall Effect in Hg₁−yMnyTe Quantum Wells, Phys. Rev. Lett. 101, 146802 (2008).pubmed.ncbi.nlm.nih.gov/18851555
- [38]H. Weng, R. Yu, X. Hu, X. Dai, and Z. Fang, Quantum Anomalous Hall Effect and Related Topological Electronic States, Adv. Phys. 64, 227 (2015).DOI
- [39]R. Yu, W. Zhang, H.-J. Zhang, S.-C. Zhang, X. Dai, and Z. Fang, Quantized Anomalous Hall Effect in Magnetic Topological Insulators, Science 329, 61 (2010).
- [40]Y. Xia, D. Qian, D. Hsieh, L. Wray, A. Pal, H. Lin, A. Bansil, D. Grauer, Y. S. Hor, R. J. Cava, and M. Z. Hasan, Observation of a Large-Gap Topological-Insulator Class with a Single Dirac Cone on the Surface, Nat. Phys. 5, 398 (2009).DOI
- [41]C.-Z. Chang, J. Zhang, X. Feng, J. Shen, Z. Zhang, M. Guo, K. Li, Y. Ou, P. Wei, L.-L. Wang, Z.-Q. Ji, Y. Feng, S. Ji, X. Chen, J. Jia, X. Dai, Z. Fang, S.- C. Zhang, K. He, Y. Wang, L. Lu, X.-C. Ma, and Q.-K. Xue, Experimental Observation of the Quantum Anomalous Hall Effect in a Magnetic Topological Insulator, Science 340, 167 (2013).
- [42]J. Ge, Y. Ge, Y. Liu, J. Li, H. L. Luo, Y. Wu, Y. Xu, and J. Wang, High-Chern-Number and High-Temperature Quantum Hall Effect Without Landau Levels, Natl. Sci. Rev. 7, 1280 (2020).DOI
- [43]M. Kriener, K. Segawa, Z. Ren, S. Sasaki, and Y. Ando, Bulk Superconducting Phase with a Full Energy Gap in the Doped Topological Insulator CuₓBi₂Se₃, Phys. Rev. Lett. 106, 127004 (2011).pubmed.ncbi.nlm.nih.gov/21517345
- [44]L. A. Wray, S.-Y. Xu, Y. Xia, Y. S. Hor, D. Qian, A. V. Fedorov, H. Lin, A. Bansil, R. J. Cava, and M. Z. Hasan, Observation of Topological Order in a Superconducting Doped Topological Insulator, Nat. Phys. 6, 855 (2010).DOI
- [45]J. L. Zhang, S. J. Zhang, H. M. Weng, W. Zhang, L. X. Yang, Q. L. Liu, S. M. Feng, X. C. Wang, R. C. Yu, L. Z. Cao, L. Wang, W. G. Yang, H. Z. Liu, W. Y. Zhao, S. C. Zhang, X. Dai, Z. Fang, and C. Q. Jin, Pressure-Induced Superconductivity in Topological Parent Compound Bi₂Te₃, Proc. Natl. Acad. Sci. 108, 24 (2011).DOI
- [46]M.-X. Wang, C. Liu, J.-P. Xu, F. Yang, L. Miao, M.-Y. Yao, C. L. Gao, C. Shen, X. Ma, X. Chen, Z.-A. Xu, Y. Liu, S.-C. Zhang, D. Qian, J.-F. Jia, and Q.-K. Xue, The Coexistence of Superconductivity and Topological Order in the Bi₂Se₃ Thin Films, Science 336, 52 (2012).DOI
- [47]Y. L. Chen, J. G. Analytis, J.-H. Chu, Z. K. Liu, K. Mo, X. L. Qi, H. J. Zhang, D. H. Lu, X. Dai, Z. Fang, S. C. Zhang, I. R. Fisher, Z. Hussain, and Z.-X. Shen, Experimental Realization of a Three-Dimensional Topological Insulator, Bi₂Te₃, Science 325, 178 (2009).DOI
- [48]D. Hsieh, Y. Xia, D. Qian, L. Wray, F. Meier, J. H. Dil, J. Osterwalder, L. Patthey, A. V. Fedorov, H. Lin, A. Bansil, D. Grauer, Y. S. Hor, R. J. Cava, and M. Z. Hasan, Observation of Time-Reversal-Protected Single-Dirac-Cone Topological-Insulator States in Bi₂Te₃ and Sb₂Te₃, Phys. Rev. Lett. 103, 146401 (2009).pubmed.ncbi.nlm.nih.gov/19905585
- [49]T. Arakane, T. Sato, S. Souma, K. Kosaka, K. Nakayama, M. Komatsu, T. Takahashi, Z. Ren, K. Segawa, and Y. Ando, Tunable Dirac Cone in the Topological Insulator Bi₂−ₓSbₓTe₃−ᵧSeᵧ, Nat. Commun. 3, 636 (2012).DOI
- [50]M. König, S. Wiedmann, C. Brüne, A. Roth, H. Buhmann, L. W. Molenkamp, X.-L. Qi, and S.-C. Zhang, Quantum Spin Hall Insulator State in HgTe Quantum Wells, Science 318, 766 (2007).pubmed.ncbi.nlm.nih.gov/17885096
- [51]L. Fu and C. L. Kane, Topological Insulators with Inversion Symmetry, Phys. Rev. B 76, 045302 (2007).DOI
- [52]D. Hsieh, D. Qian, L. Wray, Y. Xia, Y. S. Hor, R. J. Cava, and M. Z. Hasan, A Topological Dirac Insulator in a Quantum Spin Hall Phase, Nature 452, 970 (2008).
- [53]Z. K. Liu, B. Zhou, Y. Zhang, Z. J. Wang, H. M. Weng, D. Prabhakaran, S.-K. Mo, Z. X. Shen, X. Fang, X. Dai, Z. Hussain, and Y. L. Chen, Discovery of a Three-Dimensional Topological Dirac Semimetal, Na₃Bi, Science 343, 864 (2014).
- [54]S.-Y. Xu, C. Liu, S. K. Kushwaha, R. Sankar, J. W. Krizan, I. Belopolski, M. Neupane, G. Bian, N. Alidoust, T.-R. Chang, H.-T. Jeng, C.-Y. Huang, W.-F. Tsai, H. Lin, P. P. Shibayev, F.-C. Chou, R. J. Cava, and M. Z. Hasan, Observation of Fermi Arc Surface States in a Topological Metal, Science 347, 294 (2015).
- [55]H. Yi, Z. Wang, C. Chen, Y. Shi, Y. Feng, A. Liang, Z. Xie, S. He, J. He, Y. Peng et al., Evidence of Topological Surface State in Three-Dimensional Dirac Semimetal Cd₃As₂, Sci. Rep. 4, 1 (2014).DOI
- [56]S. Jeon, B. B. Zhou, A. Gyenis, B. E. Feldman, I. Kimchi, A. C. Potter, Q. D. Gibson, R. J. Cava, A. Vishwanath, and A. Yazdani, Landau Quantization and Quasiparticle Interference in the Three-Dimensional Dirac Semimetal Cd₃As₂, Nat. Mater. 13, 851 (2014).DOI
- [57]L. P. He, X. C. Hong, J. K. Dong, J. Pan, Z. Zhang, J. Zhang, and S. Y. Li, Quantum Transport Evidence for the Three-Dimensional Dirac Semimetal Phase in Cd₃As₂, Phys. Rev. Lett. 113, 246402 (2014).pubmed.ncbi.nlm.nih.gov/25541783
- [58]H. Weng, C. Fang, Z. Fang, A. A. Bernevig, and X. Dai, Weyl Semimetal Phase in Noncentrosymmetric Transition-Metal Monophosphides, Phys. Rev. X 5, 011029 (2015).DOI
- [59]X. Huang, L. Zhao, Y. Long, P. Wang, D. Chen, Z. Yang, H. Liang, M. Xue, H. Weng, Z. Fang, X. Dai, and G. Chen, Observation of the Chiral-Anomaly-Induced Negative Magnetoresistance in 3D Weyl Semimetal TaAs, Phys. Rev. X 5, 031023 (2015).DOI
- [60]I. Schewe, P. Böttcher, and H. v. Schnering, The Crystal Structure of Tl₅Te₃ and its Relationship to the Cr₅B₃ Type, Zeitschrift für Kristallographie 188, 287 (1989).DOI
- [61]S. Bradtmöller and P. Böttcher, Crystal Structure of Molybdenum Tetrathallium Tritelluride, MoTl₄Te₃, Zeitschrift für Kristallographie-Crystalline Materials 209, 75 (1994).DOI
- [62]S. Imamaliyeva, F. Sadigov, and M. Babany, New Thallium Neodymium Tellurides, Inorg. Mater. 44, 935 (2008).DOI
- [63]S. ImamaliyevaS., Tl₅GdTe₃ and Tl₅DyTe₃ - Novel Structural Tl₅Te₃ Analogues, Physics and Chemistry of Solid State 21, 492 (2020).
- [64]S. Z. Imamaliyeva, D. M. Babany, D. B. Tagiev, and M. B. Babany, Physicochemical Aspects of Development of Multicomponent Chalcogenide Phases Having the Tl₅Te₃ Structure: A Review, Russian Journal of Inorganic Chemistry 63, 1704 (2018).DOI
- [65]S. Bradtmöller and P. Böttcher, Darstellung Und Kristallstruktur Von SnTl₄Te₃ Und PbTl₄Te₃, Zeitschrift für anorganische und allgemeine Chemie 619, 1155 (1993).
- [66]K. E. Arpino, D. C. Wallace, Y. F. Nie, T. Birol, P. D. C. King, S. Chatterjee, M. Uchida, S. M. Koohpayeh, J.-J. Wen, K. Page, C. J. Fennie, K. M. Shen, and T. M. McQueen, Evidence for Topologically Protected Surface States and a Superconducting Phase in [Tl₄](Tl₁−ₓSnₓ)₂Te₃ Using Photoemission, Specific Heat, and Magnetization Measurements, and Density Functional Theory, Phys. Rev. Lett. 112, 017002 (2014).
- [67]K. E. Arpino, B. D. Wasser, and T. M. McQueen, Superconducting Dome and Crossover to an Insulating State in [Tl₄]Tl₁−ₓSnₓTe₃, APL Materials 3, 041507 (2015).DOI
- [68]W. Setyawan and S. Curtarolo, High-throughput electronic band structure calculations: Challenges and tools, Comput. Mater. Sci. 49, 299 (2010).DOI
- [69]G. Kresse and J. Furthmüller, Efficiency of Ab-Initio Total Energy Calculations for Metals and Semiconductors Using a Plane-Wave Basis Set, Comput. Mater. Sci. 6, 15 (1996).DOI
- [70]G. Kresse and J. Furthmüller, Efficient Iterative Schemes for Ab Initio Total-Energy Calculations Using a Plane-Wave Basis Set, Phys. Rev. B 54, 11169 (1996).
- [71]P. E. Blöchl, Projector Augmented-Wave Method, Phys. Rev. B 50, 17953 (1994).pubmed.ncbi.nlm.nih.gov/9976227
- [72]J. P. Perdew and A. Zunger, Self-interaction correction to density-functional approximations for many-electron systems, Phys. Rev. B 23, 5048 (1981).DOI
- [73]A. Togo and I. Tanaka, First Principles Phonon Calculations in Materials Science, Scr. Mater. 108, 1 (2015).arxiv.org/abs/1506.08498
- [74]X. Gonze and C. Lee, Dynamical matrices, Born effective charges, dielectric permittivity tensors, and interatomic force constants from density-functional perturbation theory, Phys. Rev. B 55, 10355 (1997).DOI
- [75]F. Tran and P. Blaha, Accurate Band Gaps of Semiconductors and Insulators with a Semilocal Exchange-Correlation Potential, Phys. Rev. Lett. 102, 226401 (2009).pubmed.ncbi.nlm.nih.gov/19658882
- [76]D. Koller, F. Tran, and P. Blaha, Improving the modified Bekke-Johnson exchange potential, Phys. Rev. B 85, 155109 (2012).
- [77]J. Heyd, G. E. Scuseria, and M. Ernzerhof, Hybrid Functionals Based on a Screened Coulomb Potential, J. Chem. Phys. 118, 8207 (2003).DOI
- [78]L. Hedin, New Method for Calculating the One-Particle Green’s Function with Application to the Electron-Gas Problem, Phys. Rev. 139, A796 (1965).DOI
- [79]D. Koller, F. Tran, and P. Blaha, Merits and limits of the modified Becke-Johnson exchange potential, Phys. Rev. B 83, 195134 (2011).DOI
- [80]D. J. Singh, Structure and optical properties of high light output halide scintillators, Phys. Rev. B 82, 155145 (2010).DOI
- [81]Y.-S. Kim, M. Marsman, G. Kresse, F. Tran, and P. Blaha, Towards efficient band structure and effective mass calculations for III-V direct band-gap semiconductors, Phys. Rev. B 82, 205212 (2010).DOI
- [82]D. J. Singh, Electronic structure calculations with the Tran-Blaha modified Becke-Johnson density functional, Phys. Rev. B 82, 205102 (2010).DOI
- [83]S. Kűfner, L. Matthes, and F. Bechstedt, Quantum spin Hall effect in α − Sn/CdTe(001) quantum-well structures, Phys. Rev. B 93, 045304 (2016).DOI
- [84]J. Lee, A. Seko, K. Shitara, K. Nakayama, and I. Tanaka, Prediction model of band gap for inorganic compounds by combination of density functional theory calculations and machine learning techniques, Phys. Rev. B 93, 115104 (2016).DOI
- [85]Tomáš Rauch, M. A. L. Marques, and S. Botti, Accurate electronic band gaps of two-dimensional materials from the local modified Becke-Johnson potential, Phys. Rev. B 101, 245163 (2020).DOI
- [86]A. A. Mostofi, J. R. Yates, G. Pizzi, Y.-S. Lee, I. Souza, D. Vanderbilt, and N. Marzari, An Updated Version of Wannier90: A Tool for Obtaining Maximally-Localised Wannier Functions, Comput. Phys. Commun. 185, 2309 (2014).
- [87]Q. Wu, S. Zhang, H.-F. Song, M. Troyer, and A. A. Soluyanov, WannierTools: An Open-Source Software Package for Novel Topological Materials, Comput. Phys. Commun. 224, 405 (2018).
- [88]J. M. Clary, A. M. Holder, and C. B. Musgrave, Computationally Predicted High-Throughput Free-Energy Phase Diagrams for the Discovery of Solid-State Hydrogen Storage Reactions, ACS Applied Materials & Interfaces 12, 48553 (2020).DOI
- [89]A. P. Jaroenjittichai, Formation energies and chemical potential diagrams of II-Ge-N2 semiconductors, Integrated Ferroelectrics 175, 186 (2016).
- [90]D. Mutter, D. F. Urban, and C. Elsässer, Determination of Formation Energies and Phase Diagrams of Transition Metal Oxides with DFT+U, Materials 13, 4303 (2020).DOI
- [91]H. Yokokawa, T. Kawada, and M. Dokiya, Construction of Chemical Potential Diagrams for Metal-Metal-Nonmetal Systems: Applications to the Decomposition of Double Oxides, Journal of the American Ceramic Society 72, 2104 (1989).DOI
- [92]H. Yokokawa, Generalized chemical potential diagram and its applications to chemical reactions at interfaces between dissimilar materials, Journal of Phase Equilibria 20, 258 (1999).DOI
- [93]K. T. Jacob, T. H. Okabe, T. Uda, and Y. Waseda, System Cu-Rh-O: Phase diagram and thermodynamic properties of ternary oxides CuRhO2 and CuRh2O4, Bulletin of Materials Science 22, 741 (1999).DOI
- [94]See Supplemental Material at URL will be inserted later for details.
- [95]A. Sharan and S. Lany, Computational discovery of stable and metastable ternary oxynitrides, J. Chem. Phys. 154, 234706 (2021).DOI
- [96]Y. Sun, J. Lv, Y. Xie, H. Liu, and Y. Ma, Route to a Superconducting Phase above Room Temperature in Electron-Doped Hydride Compounds under High Pressure, Phys. Rev. Lett. 123, 097001 (2019).DOI
- [97]G. Guseinov, G. Abdullayev, E. Kerimova, R. Gamidov, and G. Guseinov, Structural and physical properties of three-component CdInS2 (Se2,Te2) compounds, Materials Research Bulletin 4, 807 (1969).DOI
- [98]P. Narang, C. A. C. Garcia, and C. Felser, The Topology of Electronic Band Structures, Nat. Mater. 20, 293 (2021).DOI
- [99]L. Fu, C. L. Kane, and E. J. Mele, Topological Insulators in Three Dimensions, Phys. Rev. Lett. 98, 106803 (2007).
- [100]R. Yu, X. L. Qi, A. Bernevig, Z. Fang, and X. Dai, Equivalent Expression of Z2 Topological Invariant for Band Insulators Using the Non-Abelian Berry Connection, Phys. Rev. B 84, 075119 (2011).DOI
- [101]M. P. L. Sancho, J. M. L. Sancho, and J. Rubio, Quick Iterative Scheme for the Calculation of Transfer Matrices: Application to Mo (100), J. Phys. F: Met. Phys. 14, 1205 (1984).
- [102]M. P. L. Sancho, J. M. L. Sancho, J. M. L. Sancho, and J. Rubio, Highly Convergent Schemes for the Calculation of Bulk and Surface Green Functions, J. Phys. F: Met. Phys. 15, 851 (1985).
- [103]S. Nie, G. Xu, F. B. Prinz, and S.-C. Zhang, Topological semimetal in honeycomb lattice LnSI, Proc. Natl. Acad. Sci. 114, 10596 (2017).DOI


