betaFeedback

WorksPhysics and Astronomy

Anisotropic Magnetic and Transport Properties of RAlGe (R = Y, Gd-Tm, Lu)

Abstract

We grew single crystals of the RAlGe family for R = Y, Gd-Tm, Lu and characterized them with powder X-ray diffraction, temperature dependent specific heat measurements as well as temperature and field dependent resistance and magnetization measurements. These RAlGe materials crystallize in an orthorhombic Cmcm crystal structure in which the R atoms occupy a position with mm2mm point symmetry. We find that when R is a moment bearing rare earth atom, the RAlGe materials order antifferomagnetically at TNT_{\text{N}} ranging from 5 K (TmAlGe) to 39 K (TbAlGe). A second, lower temperature antiferromagnetic transition is also detected in the range 6-8 K for R = Tb-Ho, but no lower transition is observed (for T above 1.8 K) for R = Er, Tm. The R = Tb-Tm members show evidence for strong crystal field effects influencing the physical properties, where the crystal field favors an easy aa-axis for R = Tb-Ho and an easy bb-axis for R = Er, Tm. Of these compounds, strongly uniaxial behavior is observed for DyAlGe and TmAlGe. At T = 2 K, rich metamagnetism is observed when the external field is applied along the aa-axis for R = Tb–Ho, whereas a single metamagnetic transition is observed (up to 70 kOe) with the field along the bb-axis when R = Er and Tm. All RAlGe materials show metallic transport behavior and have moderate positive magnetoresistance up to 60-150 % at 2 K superimposed on top of metamagnetic features. The field dependent magnetization measurements on non-moment bearing YAlGe show clear de Haas-van Alphen oscillations, indicating the Fermi surface includes small, high mobility pockets.

Introduction

The RRAlGe (RR = rare earth element) materials exhibit an attractive combination of unique magnetotransport properties and potentially flexible topological states. The light rare-earth (RR = La–Gd) members of the series crystallize in a noncentrosymmetric, tetragonal I41mdI4_1md structure, and following early predictions that suggested the broken inversion symmetry may enforce type-II Weyl nodes [1, 2], were found to exhibit a wealth of interesting transport and magnetic phenomena [3] [4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18]. Highlights include the potential observation of a topological Hall effect in CeAlGe [7], and high anomalous Hall and Nernst effects that are in agreement with values predicted from the intrinsic Berry curvature in PrAlGe and NdAlGe [10, 12–15]. CeAlGe also displays complex angular magnetoresistance [8], and when alloyed with Si, CeAlGe1−x_{1-x}Six_x, the magnetoresistance undergoes enormous spikes exceeding 1000% when the applied field is aligned within 1° of the aa- or bb-axis [9]. This unusual behavior was suggested to arise from an interaction between magnetic domain walls and the small Fermi surface associated with the Weyl nodes.

The rare earth (RR = Y, Gd–Tm, Lu) based RRAlGe compounds crystallize in a different, orthorhombic, crystal structure with space group CmcmCmcm [19], except for GdAlGe, which can adopt either a high temperature tetragonal I41mdI4_1md or low temperature CmcmCmcm polymorph. Figure 1 shows that the crystal structure of the orthorhombic CmcmCmcm variant consists of corrugated Al-Ge layers and alternating triangles of RR atoms that fill the space between the Al-Ge layers. The Al-Ge layers are composed of a sheet of Al atoms that span the acac plane and which are linked above and below, in an alternating manner, by Ge atoms that form chains extending along the aa-axis. The RR atoms occupy a position with relatively low m2mm2m point symmetry in the space between the layers, sitting at the vertices of alternating isosceles triangles related to each other by inversion symmetry.

Crystal structure of orthorhombic Cmcm RAlGe

Figure 1. Crystal Structure of orthorhombic, CmcmCmcm, RAlGe, where RR = Y, Gd–Tm, Lu. The solid black lines denote the unit cell.

Compared to the light rare earth based RAlGe compounds, the heavy RAlGe materials remain relatively understudied. Existing data indicate antiferromagnetic ordering occurs between ≈7\approx7–40 K for RR = Gd–Er, [20–24] but to the best of our knowledge, no data concerning the physical properties of TmAlGe have been published. Very recent work on GdAlGe suggests the presence of strongly dispersive, Dirac-like bands that support a substantial Fermi velocity on the order of 10610^6 m/s, much greater than typically observed in magnetic topological semimetals. [25]

Here, we grow single crystals of RRAlGe for RR = Y, Gd–Tm, Lu and provide characterization of their magnetic behavior, electronic transport properties, and specific heat. We find all samples (besides YAlGe and LuAlGe) order antiferromagnetically, with TNT_N between 5 K (for TmAlGe) up to 39 K (for TbAlGe). When RR = Gd, Tb, Dy, and Ho, additional lower temperature antiferromagnetic transitions are detected under 10 K, whereas RR = Er, Tm members do not show signatures of a second transition down to 1.8 K. For RR = Tb–Ho, field dependent magnetization measurements at 2 K show multiple metamagnetic transitions when the field is applied along the aa-axis. A single, T=2T = 2 K, metamagnetic transition is detected when the field is along the bb-axis for RR = Er and Tm. All samples have metallic resistivity and show clear anomalies associated with the magnetic transitions. The heavy RAlGe compounds generally have moderate positive magnetoresistance on the order of 60–150% depending on the RR atom, with peaks or anomalies corresponding their metamagnetic transitions. Density functional theory calculations suggest the electronic structure of nonmagnetic RAlGe may support Dirac nodal lines, and presence of quantum oscilation in the magnetization of YAlGe suggests the Fermi surface contains small, low-mass bands. This work therefore provides an overview of the basic physical properties of the RAlGe family for heavy rare earths (RR = Gd-Lu, except Yb) and serves as a basis for more detailed investigation of each member.

Experimental details

Crystal growth

Single crystals of RAlGe were grown from a high temperature solution [26] based on excess aluminum. Starting with elemental rare earths (all Ames Lab, 99.99 %), Al chunks (Alfa-Aesar 99.99 %), and Ge pieces (Alfa-Aesar 99.99 %), the elements were weighed in a nominal molar ratio of R0.1(Al0.86Ge0.14)0.9R_{0.1}(\mathrm{Al}_{0.86}\mathrm{Ge}_{0.14})_{0.9} and loaded into a 3 piece alumina Canfield crucible set. [27, 28] The crucibles were sealed under vacuum inside of fused silica tubes, loaded into a box furnace, and heated to 1150°C. After dwelling at 1150°C for 1 h, the furnace was cooled to 700°C over 40 h, upon which the tubes were rapidly removed from the furnace, inverted, and the excess flux decanted in a centrifuge equiped with metal cups. Opening the crucibles revealed shiny, well faceted, three dimensional crystals with lengths of ≈3\approx3–6 mm. Thus far, our attempts to produce a hypothetical YbAlGe using the same or similar procedure have not been successful.

X-ray diffraction

To determine the phase of the crystals, samples were analyzed with powder X-ray diffraction (PXRD). Several crystals from each batch were ground to a powder, sifted through a 35 micron mesh sieve, and diffraction patterns were collected at room temperature on a Rigaku Miniflex-II instrument operating with Cu-Kα\alpha radiation (λ=1.5406\lambda= 1.5406 Å) at 30 kV and 15 mA. To determine the lattice parameters, the powder data was refined by the Rietveld method using GSAS-II software [29].

To test for possible site disorder, [22] additional single crystal X-ray diffraction was performed on a HoAlGe crystal using a Rigaku XtaLab Synergy-S diffractometer with Ag radiation (0.56087 Å) operating at 65 kV and 0.67 mA. The samples were held in a nylon loop with vacuum grease, and the data was collected at room temperature. The total number of runs and images was based on the strategy calculation from the program CrysAlisPro (Rigaku OD, 2023). The data integration and reduction were also performed using CrysAlisPro, and a numerical absorption correction was applied based on Gaussian integration over a face-indexed crystal. The structures were solved by intrinsic phasing using SHELXT software and were refined with SHELXL. The crystallographic data and refinement results are given in Tables B.4-B.2 in the appendix, and the atomic positions and thermal displacement parameters are also listed in the appendix in Table B.3.

Prior to measuring the physical properties, the crystals were oriented using a Multiwire Laue Camera operating with X-rays from a W source (λ=0.7107\lambda= 0.7107 Å) at 10 mV and 30 mA with ≈10\approx10 cm between the sample and detector.

Physical property measurements

The magnetization measurements were performed in a Quantum Design Magnetic Property Measurement System SQUID magnetometer. The samples were mounted on a kelF disk, and a blank background using the bare disk was first measured and the values subtracted. Unless noted, all temperature dependent measurements were field cooled, and the field dependent isotherms collected on increasing HH.

The temperature and magnetic field dependent electrical resistivity were measured in a Quantum Design Physical Property Measurement System. The samples were prepared by cutting the crystals in suitable bars. The contacts were 25 μ\mum thick annealed Pt wire that were either spot welded onto or attached with silver epoxy (EPO-TEK H20E) to the RAlGe samples in standard four point geometry. The spot welded contacts were covered with a small portion of silver epoxy to ensure mechanical stability. Typical contact resistances were on the order of 1 Ω\Omega.

Specific heat was measured in a Quantum Design Physical Property Measurement System. Prior to each measurement, an addenda was measured using the blank PPMS puck with a small amount of N-grease. For the moment bearing RAlGe samples, the magnetic specific (CmagC_{mag}) heat was estimated by subtracting the data for LuAlGe, which served as a reference for the electronic and phonon contributions. The magnetic entropy was determined by integrating Cmag/TC_{mag}/T. For the integration, the specific heat data below our base temperature (1.8-1.9 K) were extrapolated with a spline fit (using Origin 2026 software) to Cp=0C_{\mathrm{p}} = 0 at T=0T = 0 K.

Electronic band structure calculations

Band structure calculations in density functional theory [30, 31] (DFT) were performed with the PBE [32] exchange-correlation functional using a plane-wave basis set and projector augmented wave method, [33] as implemented in the Vienna Ab-initio Simulation Package [34, 35] (VASP). We use a kinetic energy cutoff of 240.3 eV, a Γ\Gamma-centered Monkhorst-Pack [36] (10×10×7)(10 \times10 \times7) k-mesh, and a Gaussian smearing of 0.05 eV. For the accurate calculation of density of states (DOS), we use a dense (20×20×14)(20 \times20 \times14) k-mesh with the tetrahedron method. [37] To calculate Wilson loop with Wannier charge centers, maximally localized Wannier functions (MLWF) [38, 39] and the tight-binding model were constructed with Y sdsd, Al spsp and Ge spsp orbitals to reproduce closely the band structure around the Fermi energy (EFE_{\mathrm{F}}) within EF±2E_{\mathrm{F}} \pm2 eV.

Results and discussion

Structural characterization

Figure 2a shows powder X-ray diffraction patterns obtained from the RAlGe samples and Figure 2b shows a representative Rietveld refinement for GdAlGe (analogous refinements were performed for each sample’s pattern). The observed reflections are in excellent agreement with the pattern anticipated for the CmcmCmcm YAlGe type structure (illustrated in Figure 1), and the refinements give consistently reasonable quality fits to the experimental data, with Rwp=8R_{\mathrm{wp}} = 8–13 and GOF = 1.8-3.3. We note that several patterns (in particular that for YAlGe) show very weak peaks (with intensity less than 100 counts) that are most likely from Y-Al or Y-Ge binary phases that form from excess flux which was not fully decanted off the crystals. Given such week intensities attributable to secondary phases, the PXRD patterns support successful growth of (essentially) single phase RAlGe crystals. The refined lattice parameters for each material are given in Figure 2c-Figure 2f as a function of the atomic number ZZ of the respective rare earth atoms. For R=R = Gd–Tm, Lu, all three lattice parameters decrease monotonically as the rare earth element moves from Gd to Lu, in line with the expected Lanthanide contraction. The lattice parameters for YAlGe are close to, but smaller than those found for TbAlGe with the aa-lattice parameter being the closest among the cc-lattice parameter be further below, but still closer to that found for TbAlGe than for DyAlGe.

Powder X-ray diffraction patterns and refined lattice parameters of RAlGe

Figure 2. (a) Powder X-ray diffraction patterns for the RAlGe samples. The patterns are normalized to the highest intensity (1 3 0) peak and offset for clarity. (b) Rietveld refinement of GdAlGe using the Cmcm structural model. (c)-(e) Refined lattice parameters and (f) unit cell volume of RAlGe as a function atomic number ZZ. Note the x-axis break between Y and the 4f elements (Gd-Lu). For each plot (c-f), the YAlGe data point falls between those for TbAlGe and DyAlGe.

Whereas the powder diffraction data discussed above support the CmcmCmcm YAlGe type structure for R=R = Y, Gd–Tm, Lu, a recent publication on DyAlGe and HoAlGe suggested that these two members of the heavy RAlGe series adopt a disordered variant of this structure, with the same CmcmCmcm symmetry but in which the RR, Al, Ge all have mixed occupancy on each crystallographic site. [22] Because the disordered structural model was based on fits to powder diffraction patterns, we investigated the possibility of a disordered structure by collecting and analyzing single crystal X-ray diffraction data on our HoAlGe crystals. The results of our structure solutions and refinements are presented in Tables B.4-B.3 in the appendix. In short, we find no strong evidence for a disordered structure, as the fully ordered arrangement, with atomic coordinates given in Table B.2 (and illustrated in Figure 1) gives an excellent fit to the diffraction data, and attempts to introduce mixed occupancy onto the respective positions yielded refinements in which the occupancies of the expected atoms changed by less than 1 %. Whereas we only measured single crystal diffraction on HoAlGe, the temperature dependent resistivity datasets, discussed in the following section, have residual resistance ratios, RRR = ρ(300 K)/ρ(1.8 K)\rho(300\ \mathrm{K})/\rho(1.8\ \mathrm{K}), in the range 10–20 for each member of the series, and we furthermore observe de Haas-van Alphen oscillations in the magnetization isotherms for YAlGe. Both the high RRR values and observed quantum oscillations point to weak carrier scattering, inconsistent with substantial site disorder, and coupled with the single-crystal X-ray diffraction data for HoAlGe, we conclude that there is no (significant) site-occupancy disorder in the heavy the RAlGe family.

Physical properties

YAlGe and LuAlGe

We begin our discussion of the physical properties of the RAlGe family with YAlGe and LuAlGe, which contain non-moment-bearing Y or Lu atoms. Figure 3a and 3e show the temperature dependent magnetic susceptibility, here defined as M/HM/H, of YAlGe and LuAlGe measured at 10 kOe. Both compounds have small M/HM/H, on the order of 10−510^{-5}–10−4 emu/mol10^{-4}\ \mathrm{emu/mol}, that is nearly temperature independent, but clearly anisotropic, above ≈50\approx50 K. For YAlGe, the magnetization is negative when the field is aligned along the aa- and bb-directions and positive along the cc-axis. This indicates the Landau and/or core diamagnetic contributions to the susceptibility are dominant in the former orientations and the Pauli paramagnetic contribution is dominant in the latter. In LuAlGe, the Pauli paramagnetism dominates the susceptibility in each sample orientation. In both YAlGe and LuAlGe, the susceptibility increases rapidly at low temperatures beginning below ∼50\sim50 K, which can likely be attributed to the presence of magnetic impurities in the samples. Figure 3b and Figure 3f show the temperature dependent electrical resistivity ρ\rho for each compound. Both YAlGe and LuAlGe behave as normal metals, with resistivity that decreases approximately linearly on cooling before saturating at the lowest temperatures. The residual resistance ratios (ρ(300 K)/ρ(2 K)\rho(300\ \mathrm{K})/\rho(2\ \mathrm{K})) are 16.7 and 12.9 for YAlGe and LuAlGe respectively, attesting to good crystal quality and low levels of disorder. The resistance data has no evidence for transitions, consistent with the magnetic data and with the expectations for non-moment bearing Y and Lu. The magnetoresistances (ρ(H)−ρ0)/ρ(0)(\rho(H)-\rho_0)/\rho(0) are presented in Figure 3c and Figure 3g. Both compounds have similar behavior, in which ρ(H)\rho(H) increases with a sub-linear field dependence to modest, unsaturated, values of 35 % and 24 % at 55 kOe for YAlGe and LuAlGe respectively. Magnetization isotherms measured at base temperatures of 1.8 K and 2 K are presented in Figure 3d and Figure 3h. de Haas–van Alphen oscillations are clearly present in the data for YAlGe, and their amplitude increases at higher fields, becoming most apparent above 40 kOe. No quantum oscillations are observed for LuAlGe, and instead the magnetization is weakly field dependent above 10 kOe. At lower fields, the magnetization isotherms for LuAlGe show a rapid increase, which, considering the minute (10−4 μB10^{-4}\ \mu_{\mathrm{B}}) values of MM, likely reflects the polarization of magnetic impurities extrinsic to the bulk sample.

Temperature-dependent magnetic susceptibility, resistivity, magnetoresistance, and magnetization for YAlGe and LuAlGe

Figure 3. (a) Temperature dependent magnetic susceptibility (M/HM/H), (b) temperature dependent resistivity, (c) field-dependent resistivity (MR), and (d) Field-dependent magnetization for YAlGe. (e-h) show the same data for LuAlGe.

The presence of quantum oscillation in the magnetization isotherms for YAlGe suggests the Fermi surface contains small/low mass and high mobility pockets. To quantify this further, Figure 4a and Figure 4b plot the oscillatory part of the magnetization, ΔM\Delta M as a function of inverse magnetic field, where ΔM\Delta M is the difference between the total measured magnetization and the non-oscillatory component, the latter of which was estimated using a third order polynomial fit to the M(H)M(H) isotherms. We note that to achieve appropriate data density, the data in Figure 4 was obtained from separate M(H)M(H) measurements than

Analysis of the De Haas–van Alphen oscillations for YAlGe

Figure 4. Analysis of the De Haas–van Alphen oscillations for YAlGe (a) and (b) show the oscillatory component of the magnetization plotted against inverse field for H∥bH \parallel b and H∥cH \parallel c orientations, respectively. (c) and (d) show the fast-Fourier transforms of the associated data in (a) and (b).

that shown in Figure 3d and were only measured between 40-55 kOe where the oscillations are strong. Figure 4c and Figure 4d show Fast-Fourier transforms (FFTs) of the quantum oscillations in 4a and 4b respectively. In both orientations, the FFT reveals one strong frequency, at 354 T for H∥bH \parallel b and 272 T when H∥cH \parallel c. From the frequencies, we calculated the associated Fermi-surface cross sections SFS_{\mathrm{F}} using the Lifshitz-Onsager relation:

F=ℏ2πeSF(1)F = \frac{\hbar}{2\pi e}S_{\mathrm{F}} \tag*{(1)}

where FF are the quantum oscillation frequencies corresponding to each pocket, hh is Planck’s constant, and ee is the electron charge. The 354 T and 272 T components for H∥bH \parallel b and H∥cH \parallel c are both consistent with small, low mass pockets, and represent cross sections of 3.4×10−3 A˚−23.4 \times10^{-3}\ \mathring{\mathrm{A}}^{-2} and 2.6×10−3 A˚−22.6 \times10^{-3}\ \mathring{\mathrm{A}}^{-2}, accounting for 1.9 % and 1.4 % of the respective kxk_x–kzk_z and kxk_x–kyk_y planes.

GdAlGe

The temperature dependent magnetization for GdAlGe is shown in Figure 5a. The susceptibility is effectively isotropic at high temperatures, as expected for Gd3+^{3+} with orbital angular momentum L=0L = 0. M/HM/H decreases on cooling and reaches a peak near 35 K, indicating the onset of antiferromagnetic order. The resistivity, shown in Figure 5b, is consistent with the magnetic data, with a clear loss of spin disorder scattering observed below ≈35\approx35 K. Close inspection of the low-temperature data (insets in Figure 5a and Figure 5b) indicate there are two relatively closely spaced transitions, and based on the extrema in the respective derivatives d(M/H)T/dTd(M/H)T/dT and dρ/dTd\rho/dT shown in Figure 5c and Figure 5d [40, 41], we assign transition temperatures of TN1=34.6T_{N1} = 34.6 K and TN2=29.5T_{N2} = 29.5 K, with good agreement between magnetic and transport data. The data presented here show good agreement with the previous publications on GdAlGe [25], however, the lower temperature transition was not observed in the polycrystalline samples.

Physical properties of GdAlGe

Figure 5. Physical properties of GdAlGe. (a) Temperature dependent magnetic susceptibility (left axis). The right axis shows the average of the individual inverse (M/H)(M/H) curves for each orientation (see text). The solid line shows the Curie-Weiss fit to the (M/H)avg(M/H)_{\mathrm{avg}} data (open points). (b) Temperature dependent resistivity. The inset in (b) gives a close-up view of the data between 20–40 K. (c) Derivative of the temperature-susceptibility product (d(M/H)T/dT\mathrm{d}(M/H)T/\mathrm{d}T), (d) derivative of the resistivity (dρ/dT\mathrm{d}\rho/\mathrm{d}T), (e) field dependent magnetization at T=2T = 2 K, (f) magnetoresistance at T=2T = 2 K, (g) total and magnetic contributions to the heat capacity. The data for LuAlGe is also shown for reference. (h) Estimated magnetic entropy.

The right axis of Figure 5a shows the inverse of the average of the three M/HM/H curves, where (M/H)avg=13(Ma/H+Mb/H+Mc/H)(M/H)_{\mathrm{avg}} = \frac{1}{3}(M_a/H + M_b/H + M_c/H). Above the Néel temperature, the inverse susceptibility is linear with temperature, consistent with thermally disordered local moments, and we therefore fit the (M/H)avg−1(M/H)_{\mathrm{avg}}^{-1} to the Curie-Weiss law over 100-300 K, where

(M/H)avg=CT−θ(2)(M/H)_{\mathrm{avg}} = \frac{C}{T-\theta} \tag*{(2)}

in which CC is the Curie constant, TT the temperature, and θ\theta the Weiss temperature. From the fit, we estimate θ=−66(1)\theta= -66(1) K, suggesting antiferromagnetic correlations, and an effective moment μeff=7.9(1) μB/Gd\mu_{\mathrm{eff}} = 7.9(1)\ \mu_{\mathrm{B}}/\mathrm{Gd}, very close to the value of 7.94 μB\mu_{\mathrm{B}} expected for Gd3+^{3+}.

The field dependent magnetization measured at 2 K is given in Figure 5e, and the results are also consistent with an antiferromagnetic ground state. For each orientation, MM increases linearly over the measured range of 0–55 kOe. The magnetization with the field oriented along aa and cc axes are nearly identical, and the field dependence has a smaller slope with H∥bH \parallel b, which is consistent with the smaller susceptibility, in the ordered state, for this orientation implied by Figure 5a. At 55 kOe, the magnetization only reaches ≈0.7 μB\approx0.7\ \mu_{\mathrm{B}}/Gd, far from the expected saturated moment of 7 μB7\ \mu_{\mathrm{B}} for Gd. In their recent work, Laha et al. observe a metamagnetic transition at 62 kOe; however, the step in the magnetization is small (≈0.2 μB\approx0.2\ \mu_{\mathrm{B}}) and MM remains unsaturated up to at least 70 kOe. [25] The magnetoresistance of GdAlGe is shown in Figure 5f, and increases in an approximately linear fashion to a maximum of 120 % at 55 kOe. Like the 2 K M(H)M(H) isotherm, there is no indication of saturation up to the highest measured field.

Finally, Figure 5g shows the specific heat of GdAlGe measured between 1.8–50 K. Both magnetic transitions are apparent as well-resolved peaks at TN1=34.7T_{N1} = 34.7 K and TN2=29.8T_{N2} = 29.8 K, consistent with the transition temperatures determined by magnetic and transport data. To estimate the magnetic contribution of the specific heat (CmagC_{\mathrm{mag}}), we measured and subtracted the specific heat of LuAlGe, which serves as a reference for the electronic and phonon contributions to CpC_{\mathrm{p}} for the heavy RAlGe series. The data for LuAlGe is shown as a gray curve in Figure 5g and the estimated CmagC_{\mathrm{mag}} of GdAlGe is the green dataset. We integrated Cmag/TC_{\mathrm{mag}}/T to estimate the magnetic entropy associated with the transitions. The results are shown in Figure 5h and show that approximately 90 % of the full Rln⁡8R\ln8 is recovered by 50 K. This entropy deficiency strongly suggests that LuAlGe is only an approximate of the non-magnetic contributions to the specific heat of GdAlGe. It is also possible that some magnetic correlations persist above TNT_N. As such, we can only extract qualitative statements about entropy associated with other members of the RAlGe series, likely with increasing accuracy as the moment bearing R gets closer to Lu.

TbAlGe

The data collected on TbAlGe single crystals are presented next in Figure 6. The magnetization is anisotropic in the paramagnetic state, with the strongest response observed when H∥aH \parallel a. The inverse (M/H)avg−1(M/H)_{\mathrm{avg}}^{-1} is linear above ≈100\approx100 K. Curie-Weiss fits over this temperature range give θavg=−43.8(5)\theta_{\mathrm{avg}} = -43.8(5) K, suggesting antiferromagnetic correlations, and an effective moment of 9.7(1) μB9.7(1)\ \mu_{\mathrm{B}}/Tb, agreeing well with the expected 9.72 μB9.72\ \mu_{\mathrm{B}} for Tb3+^{3+}.

Physical properties of TbAlGe

Figure 6. Physical properties of TbAlGe. (a) Temperature dependent magnetic susceptibility (left axis). The right axis shows the polycrystalline average of the individual inverse (M/H)(M/H) curves for each orientation. The solid line shows the Curie-Weiss fit to the (M/H)avg(M/H)_{\rm avg} data (open points). (b) Temperature dependent resistivity. The inset gives a close-up view of the data between 1.8–50 K. (c) Derivative of the temperature-susceptibility product (d(M/H)T/dT)(d(M/H)T/dT), (d) derivative of the resistivity (dρ/dT)(d\rho/dT), (e) field dependent magnetization at T=2T = 2 K, (f) magnetoresistance at T=2T = 2 K, (g) total and magnetic contributions to the heat capacity. The data for LuAlGe is also shown for reference. (h) Estimated magnetic entropy. The horizontal dashed lines show the entropy expected for different multiplets.

In prior works, TbAlGe was reported to order antiferromagnetically at TN1≈39T_{N1} \approx39 K and TN2≈7T_{N2} \approx7 K [21, 23, 24], and our measurements are consistent with the earlier results. Figure 6a and Figure 6b, and the respective derivatives in 6c and 6d show that antiferromagnetic transitions are observed at TN1=39T_{N1} = 39 K and TN2=7T_{N2} = 7 K in our magnetic and transport data. Given the step-like drop of M/HM/H at 7 K when H∥aH \parallel a, the lower transition may be first-order. The M/HM/H data and M(H)M(H) isotherms (discussed next) suggest that Tb spins are primarily aligned along the aa-axis below TN2T_{N2}.

Figure 6e shows the field dependent magnetization of TbAlGe measured at 2 K. When H∥aH \parallel a, MM undergoes two step-like jumps, at ≈12\approx12 kOe and 35 kOe, reaching 1.8 μB1.8\ \mu_{\mathrm{B}}/Tb−1^{-1} at 70 kOe. Both transitions are hysteretic, suggesting a first order nature. At the highest fields (≈68\approx68–70 kOe), MM appears to slightly increase, hinting that a third metamagnetic transition may occur just above 70 kOe. The possibility of another transition at higher field is consistent with the relatively low values of MM compared to the anticipated saturated moment of 9 μB\mu_{\rm B} for Tb3+^{3+} ions; however, higher field measurements are needed to confirm this. The magnetization for H∥bH \parallel b and H∥cH \parallel c both show a linear field dependence with no indication of metamagnetism up to 70 kOe. Our data is in reasonable agreement with recent work on TbAlGe single crystals reported by Gouda et al. [23].

The magnetoresistance at 2 K is given in Figure 6f. With the field applied along aa, the resistance shows a peak at 19 kOe and a broader increase beginning at ≈40\approx40 kOe. Both features correspond reasonably well with the two metamagnetic transitions observed in the H∥aH \parallel a magnetization isotherms. Whith the field applied along bb and cc, the magnetoresistance increases monotonically to modest values near 70 % at 55 kOe and shows no signatures of a transition, in agreement with the magnetic data for these orientations.

Both AFM transitions show strong peaks in the specific heat data (Figure 6g), and the transition temperatures TN1=39.3T_{N1} = 39.3 K and TN2=7.6T_{N2} = 7.6 K are in good agreement with the magnetic and transport data. The sharp, spike-like feature observed at TN2T_{N2} may suggest the lower temperature transition is first-order, and this interpretion is consistent with the steplike drop observed in the H∥aH \parallel a magnetic data in Figure 6a. Figure 6h shows that by 70 K, the magnetic entropy recovers ≈85%\approx85\% of the Rln⁡13R\ln13 expected for J=6J = 6 Tb local moments. Considering the clear magnetic anisotropy visible in the M(T)M(T) data up to 300 K, this is consistent with some degree of CEF splitting above the magnetic ordering temperatures.

DyAlGe

DyAlGe has qualitatively similar properties to TbAlGe but with stronger aa-axis anisotropy (at low temperatures) and transitions that are shifted to lower temperatures. In agreement with the data on polycrystalline samples, [22] our magnetic susceptibility and resistivity measurements indicate DyAlGe undergoes two transitions, at TN1≈28T_{N1} \approx28 K and TN2≈6.2T_{N2} \approx6.2 K, as shown in Figure 7a–Figure 7d. M/HM/H has a prominent peak at TN1T_{N1} (28 K) when H∥aH \parallel a. Broad M/HM/H humps with maxima at ≈50\approx50 K are observed when the field is oriented along bb and cc, likely attributable to low lying crystal field levels. This behavior shows DyAlGe to have strongly uniaxial behavior in which the moments are aligned along the aa-axis below TNT_N. The H∥aH \parallel a susceptibility curve shows a second, very sharp transition at TN2≈6T_{N2} \approx6 K that is only weakly resolved with the field along the other principle axes but is clearly observed in the resistivity (see inset to 7b). Curie-Weiss fits to the high temperature data give μeff=10.7(2)μB\mu_{\rm eff} = 10.7(2) \mu_{\rm B}/Dy, in very good agreement with the expected 10.6 μB\mu_{\rm B} for Dy3+^{3+} local moments. The paramagnetic temperature θavg\theta_{\rm avg} is -23.4(5) K, consistent with the observed antiferromagnetic order.

Physical properties of DyAlGe

Figure 7. Physical properties of DyAlGe. (a) Temperature dependent magnetic susceptibility (left axis). The right axis shows the polycrystalline average of the individual inverse (M/H)−1(M/H)^{-1} curves for each orientation. The solid line shows the Curie-Weiss fit to the (M/H)avg−1(M/H)_{\mathrm{avg}}^{-1} data (open points). (b) Temperature dependent resistivity. The inset in (b) gives a close-up of the data between 1.8–35 K with arrows marking the transitions. (c) Derivative of the temperature-susceptibility product (d(M/H)T/dT)(d(M/H)T/dT), (d) derivative of the resistivity (dρ/dT)(d\rho/dT), (e) field dependent magnetization at T=2T = 2 K, (f) magnetoresistance at T=2T = 2 K, where the inset shows a zoomed-in view near the 60 kOe transition, (g) total and magnetic contributions to the heat capacity. The data for LuAlGe is also shown for reference. (h) Estimated magnetic entropy. The horizontal dashed lines show the entropy expected for different multiplets.

The field dependent magnetization of DyAlGe at 2 K is shown in Figure 7e. Like TbAlGe, rich metamagnetism is observed with the applied field along the aa-axis. The H∥aH \parallel a data provides evidence for four metamagnetic transitions occurring below 70 kOe, that occur at approximately 9 kOe, 16 kOe, 38 kOe, and 53 kOe when increasing the field. The H∥aH \parallel a isotherm shows clear hysteresis between 14–40 kOe and for the high field transition at 52–57 kOe. For fields aligned along the bb and cc axes, the magnetization increases linearly up to 70 kOe, with a greater slope when H∥bH \parallel b. Given that MM only reaches ≈4.5\approx4.5 μB\mu_{\mathrm{B}}/Dy and has yet to saturate at 70 kOe, additional metamagnetic transitions are likely to be found at higher fields. As such, DyAlGe may be like TbNi2_2Ge2_2, [42] providing another example of a strongly uniaxial moment with a devil’s staircase-like M(H)M(H).

The magnetoresistance is shown in Figure 7f. When the field is applied along the aa-axis, metamagnetic transitions occur at ≈10\approx10 kOe and 60 kOe. These transitions approximately align with the first and last metamagnetic transitions observed in the magnetic isotherms, and the slightly higher onset fields likely come from imperfect sample orientation. Whereas the intermediate-field metamagnetism detected in Figure 7e is not observed in the transport data, the magnetoresistance shows a broad hysteretic region over approximately the same fields, between 10–45 kOe. The magnetoresistance increases monotonically with field when H∥bH \parallel b, consistent with the magnetic data, and reaches modest maximum values of 120 % at 90 kOe.

Figure 7g shows that both transitions are observed in the specific heat, and the transition temperatures agree well with the magnetic and transport results. While in part accounted for by an imperfect non-magnetic background subtraction (LuAlGe), there is substantial magnetic entropy remaining above TNT_N, and the peak associated with magnetic order at 28.5 K appears superimposed on a relatively broad Schottky-like maxima in CmagC_{\mathrm{mag}}. This is consistent with H∥bH \parallel b and H∥cH \parallel c magnetization data, and is associated with thermal population of the crystal

field levels. Given that an analogous feature is not observed in TbAlGe, which also shows strongly uniaxial behavior in the paramagnetic state (see Figure 13 in the Appendix) but much weaker anisotropy at 2 K, it is likely that the ground state CEF multiplet is more energetically isolated from the next lowest energy states in DyAlGe than in TbAlGe. Inelastic neutron data would be needed to confirm this picture. By 70 K, the integrated magnetic entropy reaches nearly 80 % the full Rln16 expected for trivalent Dy moments.

Image not extracted

Figure 13. Inverse M/HM/H plotted against temperature for RAlGe for R=TbR = \mathrm{Tb}–Tm. The solid lines are Curie-Weiss fits to the respective data. Results for GdAlGe are not shown since Gd has L=0L = 0, leading to negligible CEF effects and isotropic paramagnetic behavior. Note that in ErAlGe, the high temperature behavior of (M/H)−1(M/H)^{-1} deviates from linearity above ≈225\approx225 K for the data measured in the H∥cH \parallel c orientation. We believe this is an experimental artifact, which gives clearly erroneous values of μeff\mu_{\mathrm{eff}} and θc\theta_c; therefore, we performed Curie-Weiss fits between 100–200 K, where the data is linear with similar slope to the H∥aH \parallel a and H∥bH \parallel b data.

HoAlGe

Figure 8 shows the data collected on HoAlGe single crystals. The results are again qualitatively similar to those of TbAlGe and DyAlGe, with TN1T_{N1} pushed to lower temperature as the R atom changes from Tb to Ho. The magnetic susceptibility (Figure 8a) shows two antiferromagnetic transitions, at TN1=10.2T_{N1} = 10.2 K and TN2=7.4T_{N2} = 7.4 K based on d(M/H)T/dTd(M/H)T/dT (Figure 8c). The resistivity, shown in Figure 8b, shows good metallic behavior, a RRR of 11.5, and two transitions in excellent agreement with the magnetic results (see dρ/dTd\rho/dT in Figure 8d). These results are again roughly consistent with 11 K and 8 K antiferromagnetic transition temperatures previously found in polycrystalline HoAlGe. [22] Fitting the high temperature susceptibility to the Curie-Weiss law gives θ=−8.9(2)\theta= -8.9(2) K, consistent with antiferromagnetic interactions. The estimated effective moment is 10.3(2) μB\mu_{\mathrm{B}}/Ho, matching the expected value of 10.3 for trivalent Ho local moments.

Image not extracted

Figure 8. Physical properties of HoAlGe. (a) Temperature dependent magnetic susceptibility (left axis). The right axis shows the polycrystalline average of the individual inverse (M/H)−1(M/H)^{-1} curves for each orientation. The solid line shows the Curie-Weiss fit to the (M/H)avg−1(M/H)_{\mathrm{avg}}^{-1} data (open points). (b) Temperature dependent resistivity. The insets in (a) and (b) give zoomed view of the data between 1.8–20 K. (c) Derivative of the temperature-susceptibility product (d(M/H)T/dT)(\mathrm{d}(M/H)T/\mathrm{d}T), (d) derivative of the resistivity (dρ/dT)(\mathrm{d}\rho/\mathrm{d}T), (e) field dependent magnetization at T=2T = 2 K with insets showing a close-up view near the metamagnetic transitions, (f) magnetoresistance at T=2T = 2 K, (g) total and magnetic contributions to the heat capacity. The data for LuAlGe is also shown for reference. (h) Estimated magnetic entropy. The horizontal dashed lines show the entropy expected for different multiplets.

The field dependent magnetization at 2 K is shown in Figure 8e. When H∥aH \parallel a, Figure 8e shows three metamagnetic transitions at approximately 14 kOe, 25 kOe, and 32.5 kOe. Here the critical fields were determined by maxima in dM/dH\mathrm{d}M/\mathrm{d}H, for the increasing field-sweep. The upper inset in Figure 8e shows clear hysteresis between ≈ 12–25 kOe, whereas the higher field transition at 30 kOe is not hysteretic. Above the transitions, the magnetization saturates at ≈ 8.5 μB\mu_{\mathrm{B}} at 70 kOe. When H∥cH \parallel c, the magnetization first increases linearly at low fields and then undergoes two metamagnetic transitions at approximately 38 kOe and 48 kOe. Both transitions display measurable hysteresis upon raising and lowering the field, and above the second transition, the magnetization continues to increase with field, reaching nearly 8 μB\mu_{\mathrm{B}} at 70 kOe. As this is smaller than the expected 10 μB\mu_{\mathrm{B}} expected for Ho3+^{3+}, we anticipate additional metamagnetism at yet higher fields. Finally, when H∥bH \parallel b, the magnetization increases linearly to ≈ 4 μB\mu_{\mathrm{B}} at 40 kOe, where the curve begins to saturate towards 5 μB\mu_{\mathrm{B}} as HH approaches 70 kOe. The presence of metamagnetism in multiple field orientations is consistent with the temperature dependent behavior, indicating that while still anisotropic, the magnetism of HoAlGe is substantially less anisotropic than in DyAlGe. The magnetoresistance is shown in Figure 8f and undergoes a step-like jump at 13 kOe when H∥aH \parallel a. Above the metamagnetic transition, the resistance increases nearly linearly with field until 36 kOe, where it drops rapidly, finally reaching a minimum at 58 kOe, above which it increases with field and is not saturated by 90 kOe. Like with DyAlGe, the sharp changes in behavior shown in the magnetoresistance for HoAlGe correspond reasonably well with the metamagnetism found in the M(H)M(H) isotherms.

Figure 8g shows the heat capacity of HoAlGe. Both transitions are evident at 7.7 K and 10.9 K, in good agreement with magnetic and transport results. The lower, 7.7 K, transition produces a very narrow spike in CpC_{\mathrm{p}}, indicating a first order nature. This is consistent with the sharp, step-like, features observed in the magnetic and resistivity datasets at TNT_{\mathrm{N}} (see insets to Figure 8a and Figure 8b). The magnetic entropy, shown in Figure 8h, recovers nearly the full Rln⁡17R\ln17 expected for free J=9J = 9 Ho3+^{3+} ions by 40 K, suggesting HoAlGe has smaller CEF splitting compared to R=TbR = \mathrm{Tb} and Dy members which is consistent with the weaker magnetic anisotropy observed for HoAlGe.

ErAlGe

The magnetic behavior of the RAlGe series substantially changes when crossing from R=HoR = \mathrm{Ho} to Er. The temperature dependent magnetization and resistivity, and their respective derivatives shown in Figure 9a-Figure 9d indicate that the Er moments order antiferromagnetically at TN=6T_{\mathrm{N}} = 6 K, with no additional transitions observed at lower temperature. Figure 9a and its inset show that whereas M/HM/H reaches a maximum at the Néel temperature when H∥bH \parallel b, the transition is only weakly observed when the field is applied along aa- or cc-axes. Unlike samples with R=TbR = \mathrm{Tb}-Ho, which likely have local moments oriented primarily along the aa-axis, for R=ErR = \mathrm{Er}, the behavior above and below TNT_{\mathrm{N}} suggests the local moments have an easy bb-axis. It is very likely that the change in anisotropy observed here in the orthorhombic RAlGe family reflects a change in sign of the leading terms in the crystal field Hamiltonian, which are normally expected to switch between between R=HoR = \mathrm{Ho} and R=ErR = \mathrm{Er} in an isostructural series owing to the change in sign of the second-order Steven’s factor [43]. This is discussed in more detail in the discussion section.

Physical properties of ErAlGe

Figure 9. Physical properties of ErAlGe. (a) Temperature dependent magnetic susceptibility (left axis). The right axis shows the average of the individual inverse (M/H)(M/H) curves for each orientation. The solid line shows the Curie-Weiss fit to the (M/H)avg(M/H)_{\mathrm{avg}} data (open points). (b) Temperature dependent resistivity. The insets in (a) and (b) give a zoomed view of the data at low temperature. (c) Derivative of the temperature-susceptibility product (d(M/H)T/dT\mathrm{d}(M/H)T/\mathrm{d}T), (d) derivative of the resistivity (dρ/dT\mathrm{d}\rho/\mathrm{d}T), (e) field dependent magnetization at T=2T = 2 K, (f) magnetoresistance at T=2T = 2 K, (g) total and magnetic contributions to the heat capacity. The data for LuAlGe is also shown for reference. (h) Estimated magnetic entropy. The horizontal dashed lines show the entropy expected for different multiplets.

The right axis of Figure 9a shows the inverse of M/HavgM/H_{\mathrm{avg}} of ErAlGe. The Curie-Weiss fits suggest an average effective moment of 9.6(3) μB/Er9.6(3)\,\mu_{\mathrm{B}}/\mathrm{Er}, in excellent agreement with the expected value of 9.59 μB9.59\,\mu_{\mathrm{B}} for Er3+\mathrm{Er}^{3+} local moments. The average Weiss temperature is −7.6(4)-7.6(4) K, suggesting antiferromagnetic interactions above TNT_{\mathrm{N}}, which is also in agreement with the experimental observations.

Figure 9e shows the field dependent magnetization at 2 K. MM is isotropic until ≈20\approx20 kOe, upon which MM rapidly jumps from ≈3 μB/Er\approx3\,\mu_{\mathrm{B}}/\mathrm{Er} to 7 μB/Er7\,\mu_{\mathrm{B}}/\mathrm{Er} between 20–30 kOe when H∥bH \parallel b. Above 20 kOe, when H∥aH \parallel a, MM appears to be saturating towards ≈4 μB/Er\approx4\,\mu_{\mathrm{B}}/\mathrm{Er}, and when H∥cH \parallel c, MM continues to gradually increase, approaching 7.5 μB/Er7.5\,\mu_{\mathrm{B}}/\mathrm{Er} at 55 kOe, which is lower than the 9 μB9\,\mu_{\mathrm{B}} expected for Er3+\mathrm{Er}^{3+} local moments. The isotherm shows no hysteresis when measuring with increasing and decreasing fields, differing from the metamagnetism observed for Tb–Ho based samples. The H∥bH \parallel b magnetoresitance, shown in Figure 9f, has a prominent peak at ≈20\approx20 kOe, in agreement with the metamagnetic transition, and otherwise increases with field up to ≈60\approx60 % at 90 kOe.

The heat capacity of ErAlGe is shown in Figure 9g. A lambda-like peak is observed at 6.8 K, in reasonable agreement with the Néel temperature inferred from the magnetic and transport data. Below the transition, the heat capacity does not approach zero and is nearly constant on cooling at the lowest temperatures. This behavior indicates there is remaining entropy at our base temperature of 1.9 K and suggests that another magnetic transition would likely occur with further cooling. The magnetic entropy, shown in Figure 9h recovers nearly Rln⁡4R\ln4 at the transition. Given a formal CEF quartet is impossible in orthorhombic symmetry, this may indicate the presence of a low-energy pseudoquartet, composed of two closely spaced doublets. By 70 K, the magnetic entropy recovers approximately 80 % the Rln⁡16R\ln16 expected for trivalent Er moments. Considering that the low temperature specific heat is not trending towards the origin, the spline extrapolation to Cp=0C_{\mathrm{p}} = 0 at T=0T = 0 that we used to estimate the specific heat below our lowest temperature data point (see experimental details section) is unreliable in ErAlGe. Because the true temperature dependence of CpC_{\mathrm{p}} was not measured below 1.9 K, the integration shown in Figure 9h likely results in an underestimate of the true magnetic entropy.

TmAlGe

The physical properties of TmAlGe are similar to those of ErAlGe but with much stronger bb-axis anisotropy. Like ErAlGe, the magnetization (shown in Figure 10a) shows a prominent peak at TN=5T_{\mathrm{N}} = 5 K when H∥bH \parallel b. The temperature dependence is considerably weaker for samples oriented with the field applied along aa and cc. In both orientations, a small local M/HM/H maxima is observed at 5 K followed by another, relatively broad, maxima between ≈10\approx10-70 K (shown in inset to Figure 10a). The latter is likely attributable to relatively low-lying crystal field multiplets. Fitting M/HavgM/H_{\mathrm{avg}} to the Curie-Weiss law gives θavg=−2.0(2)\theta_{\mathrm{avg}} = -2.0(2) and μeff=7.5(2) μB/Tm\mu_{\mathrm{eff}} = 7.5(2)\,\mu_{\mathrm{B}}/\mathrm{Tm}, in good agreement with the expectation of 7.56 μB/Tm7.56\,\mu_{\mathrm{B}}/\mathrm{Tm}.

Physical properties of TmAlGe

Figure 10. Physical properties of TmAlGe. (a) Temperature dependent magnetic susceptibility (left axis). The right axis shows the average of the individual inverse (M/H)−1(M/H)^{-1} curves for each orientation. The solid line shows the Curie-Weiss fit to the (M/H)avg−1(M/H)_{\mathrm{avg}}^{-1} data (open points). (b) Temperature dependent resistivity. (c) Derivative of the temperature-susceptibility product (d(M/H)T/dT\mathrm{d}(M/H)T/\mathrm{d}T). The insets in (a)–(c) give zoomed views of the data at low temperatures. (d) Derivative of the resistivity (dρ/dT\mathrm{d}\rho/\mathrm{d}T), (e) field dependent magnetization at T=2T = 2 K, (f) magnetoresistance at T=2T = 2 K, (g) total and magnetic contributions to the heat capacity. The data for LuAlGe is also shown for reference. (h) Estimated magnetic entropy. The horizontal dashed lines show the entropy expected for different multiplets.

The resistivity for TmAlGe is shown in Figure 10b. Like the other RAlGe materials, ErAlGe shows metallic behavior and a moderate RRRRRR of 12.8. Loss of spin disorder scattering is evident at TN≈5T_N \approx5 K (see dρ/dT\mathrm{d}\rho/\mathrm{d}T in Figure 10d), in good agreement with the single transition found at 5 K in the magnetic data.

The field dependent magnetization for TmAlGe is presented in Figure 10e. When H∥bH \parallel b, a clear metamagnetic transition is observed at ≈12\approx12 kOe, where the magnetization quickly jumps from 2 to 7 μB\mu_B/Tm. Like ErAlGe, the metamagnetic transition does not have observable hysteresis when raising or lowering the field; however, unlike ErAlGe, TmAlGe shows substantial M(H)M(H) anisotropy at all fields, whereas the isotherms for ErAlGe are isotropic below its metamagnetic transition. Above 25 kOe, the magnetization for the H∥bH \parallel b orientation appears saturated at 6.9 μB\mu_B up to 55 kOe, in reasonable agreement with the expected 7 μB\mu_B for Tm ions. No metamagnetism is evident in the other two orientations. Instead, MM increases linearly over the measured field range when H∥cH \parallel c, reaching 1 μB\mu_B/Tm at 55 kOe. MM increases weakly with the field when oriented with H∥aH \parallel a, only achieving 0.3 μB\mu_B/Tm at 55 kOe.

Figure 10f gives the magnetoresistance of TmAlGe when I∥cI \parallel c and H∥bH \parallel b. Like ErAlGe, the magnetoresistance first increases with field, but falls sharply at 15 kOe, corresponding to the metamagnetic transition observed for H∥bH \parallel b in the field dependent magnetization data (Figure 10e). After the peak, the resistance increases nearly linearly up to 60% at 90 kOe.

Finally, Figure 10g shows the heat capacity of TmAlGe. A lambda peak is observed at 5.3 K, consistent with the Néel temperature inferred from magnetic and transport data. Like ErAlGe, the specific heat does not trend towards zero at our lowest temperature, which may point towards additional magnetic transitions at lower temperatures. The magnetic heat capacity furthermore shows a broad Schottky-like anomaly between ≈10\approx10–70 K, likely reflecting thermal population of the crystal field levels. This is consistent with the behavior of the magnetization when the field is applied along the aa- and cc-axis and in-line with the much stronger uniaxial anisotropy observed for TmAlGe than ErAlGe. The magnetic entropy is shown in Figure 10h and recovers nearly 75% Rln2 at the 5.3 K transition, which may suggest a ground state doublet. Since Tm is not a Kramer’s ion, such a doublet is not guaranteed. The integrated entropy recovers over 75% of the full Rln13 by 70 K. As was the case for ErAlGe, the magnetic entropy in Figure 10h is likely underestimated due to the small but apparent remaining entropy at 1.9 K, which is not accounted for by our extrapolation of the data to the origin and therefore neglected in our integration.

Discussion

de Gennes scaling and magnetic anisotropy

The key results from our measurements are outlined in Table 1, which contains the lattice parameters, magnetic transition temperatures, effective (paramagnetic) magnetic moment, Weiss temperatures, and de Gennes factor ((dG=(g−J)2J(J+1)\mathrm{dG} = (g-J)^2J(J+1))), with gg the Lande gg factor and JJ the total angular momentum for the magnetic moment-bearing members of the RAlGe family. At sufficiently high temperatures (T>100T > 100 K), the moment bearing RAlGe compounds (R=GdR = \mathrm{Gd}–Tm) show paramagnetic Curie-Weiss like behavior with estimated effective moments that agree well the the expected free-ion values. On cooling, the moment bearing members all show long-range antiferromagnetic order. When RR = Tb–Ho, the samples have two transitions in which the moments are aligned (at least primarily) along the aa-axis, with strongest anisotropy observed for DyAlGe. The first, higher temperature transition, decreases from 39 K in TbAlGe to 10 K in HoAlGe, whereas the second, lower temperature, transition occurs near ≈7 K in each. Based on the step-like features in the magnetization and sharp peaks observed in the specific heat, the lower transition in Tm-, Dy-, and Ho-based members is likely first-order in nature. The magnetic behavior changes for RR beyond Ho. Unlike the RR = Gd–Ho members, ErAlGe and TmAlGe each have only a single magnetic transition above 1.8 K and show bb-axis anisotropy that is considerably stronger in the case of TmAlGe. We note however that a second, lower temperature transition may also be found in these samples below 1.8 K, and that this notion is roughly supported by the small, but finite, entropy implied by the behavior of the specific heat at lowest temperatures. If the RKKY interactions mediates the coupling between the rare-earth based local moments through the conduction electrons, then in a mean field approximation, both the magnetic ordering and paramagnetic Weiss temperature should be proportional to the de Gennes factor. As shown in Figure 11 and

Néel and Weiss temperatures as functions of the de Gennes factor

Figure 11. (a) Néel temperature as a function of the rare-earth ion de Gennes factor (dG) for the RAlGe. (b) Weiss temperature (θavg\theta_{\mathrm{avg}}), obtained from polycrystalline averaged M/HM/H, as a function of the rare-earth ion de Gennes factor for the RAlGe. The dashed lines show the values of TNT_{\mathrm{N}} and θavg\theta_{\mathrm{avg}} expected for ideal de Gennes scaling.

RAlGeaa (Å)bb (Å)cc (Å)VV (Å3^3)TN1T_{\mathrm{N1}} (K)TN2T_{\mathrm{N2}} (K)μeff\mu_{\mathrm{eff}} (μB\mu_{\mathrm{B}}/R)θavg\theta_{\mathrm{avg}} (K)dG
GdAlGe4.0626(1)10.52(2)5.803(1)248.05(1)34.7, 35 [25]29.8, 30 [25]7.9(1)-66(1)15.75
TbAlGe4.0467(1)10.45(2)5.772(1)244.00(1)39.3, 39 [21], 38 [23], 40 [24]7.6, 7 [21], 7.6 [23], 8 [24]9.7(1)-43.8(5)10.5
DyAlGe4.0376(1)10.40(2)5.749(1)241.39(1)28.5, 30 [22]6.510.7(2)-23.4(5)7.08
HoAlGe4.0306(1)10.35(2)5.729(1)239.08(1)10.9, 11 [22]7.710.3(2)-8.9(2)4.5
ErAlGe4.0222(1)10.31(2)5.708(1)236.64(1)6.8, 7 [21]-9.6(3)-7.6(4)2.55
TmAlGe4.0136(1)10.27(2)5.688(1)234.53(1)5.3-7.5(2)-2.0(2)1.16

Table 1. Summary of key results for the moment-bearing members of the RAlGe family (R = Gd-Tm). Lattice parameters, antiferromagnetic transition temperatures, effective magnetic moments, averaged Weiss temperatures, and de Gennes factor (dG = (g−J)2J(J+1)(g-J)^2J(J+1)). The listed transition temperatures are inferred from the specific heat measurements. We also include references to the magnetic ordering temperatures reported in previous studies of RAlGe compounds.

Table 1, we find relatively poor, non-linear and non-monotonic scaling between TN1T_{\mathrm{N1}} and dGdG. Such poor de Gennes scaling of TNT_{\mathrm{N}} is likely associated with the crystal field, which constrains the moments to the aa-axis for RR = Tb–Ho members and to the bb-axis for RR = Er, Tm.

Strongly uniaxial behavior produces highly anisotropic interactions between magnetic moments, conditions under which de Gennes scaling is expected to be violated [44]. In the RAlGe series, this is supported by two observations. First, the deviation from the expected de Gennes scaling is greatest for RR = Tb, Dy, and Tm, which differ from the "ideal" values by a factor of 1.6, 1.8, and 2, respectively, whereas the TNT_{\mathrm{N}} values of HoAlGe and ErAlGe essentially fall on the expected line. If we take the magnetic anisotropy as an indicator of the crystal field splitting, the relative deviation from the values predicted for perfect de Gennes scaling is strongest for the RAlGe members with the greatest anisotropy (see Figure 6-Figure 10 and Figure 13 in the Appendix). Second, unlike the ordering temperatures, Figure 11b shows that the polycrystalline average Weiss temperatures scales well with the de Gennes factor. Whereas the anisotropic Weiss temperatures (θa\theta_a, θb\theta_b, and θc\theta_c) have contributions from both the molecular field (exchange) and the crystal field, the crystal field effects should be canceled by averaging such that θavg\theta_{\mathrm{avg}}, obtained from fits to (M/H)avg−1(M/H)_{\mathrm{avg}}^{-1}, should reflect only the sign and magnitude of the exchange [45]. The substantially improved linearity between dG and θavg\theta_{\mathrm{avg}} support RKKY mediated exchange in the RAlGe series, where the deviations in the de Gennes scaling TNT_{\mathrm{N}} are the consequence of the crystal field restricting magnetic moments to aa- or bb-crystallographic axes for RR = Tb-Ho and RR = Er, Tm respectively.

The change from having an easy aa- to bb-axis that is observed on crossing from HoAlGe to ErAlGe is also an expected consequence of the crystal field. This can be demonstrated by considering the general crystal field Hamiltonian

HCEF=∑n,mBnmOnm(3)H_{\mathrm{CEF}} = \sum_{n,m} B_n^m O_n^m \tag*{(3)}

where BnmB_n^m are the crystal field parameters and OnmO_n^m are the Stevens operators. In the CmcmCmc m RAlGe materials, the rare-earth atoms occupy a relatively low symmetry environment with m2mm2m point symmetry, producing a full CEF Hamiltonian in which all nine even terms from B20B_2^0 to B66B_6^6 are allowed. Despite the complexity, if we assume the leading terms are dominant, then the sign of B20B_2^0 will dictate whether the system shows an easy zz-axis or xyxy-plane, and a finite B22B_2^2 will further break the rotational symmetry within the xyxy-plane. Importantly, the second-order terms are expected to change sign between R=HoR = \mathrm{Ho} and R=ErR = \mathrm{Er}, as can be seen by the general expression for the crystal field parameters [46]

Bnm=Anm⟨rn⟩θn(4)B_{n}^{m} = A_{n}^{m}\langle r^{n}\rangle\theta_{n} \tag*{(4)}

where AnmA_{n}^{m} are related to the ligand environment, ⟨rn⟩\langle r^{n}\rangle is the expectation value of the radial wavefunction, and θn\theta_n are the Steven’s multiplicative factors [43, 47]. Because the point-symmetry and ligand environment are preserved across the RAlGe series, the sign of B20B_{2}^{0} is generically expected to change between HoAlGe and ErAlGe owing to the fact the second-order Stevens parameter, θ2=αJ\theta_2 = \alpha_J, switches from negative values for R=TbR = \mathrm{Tb}–Ho\mathrm{Ho} to positive for R=Ho,ErR = \mathrm{Ho}, \mathrm{Er}. [43] Consequentially, the magnetic easy-axis of the RAlGe compounds is anticipated to change between HoAlGe and ErAlGe, as is commonly observed in many rare earth-based series of materials. [42, 48, 49, 50, 51, 52]

As outlined in the Appendix, we attempted to make these statements more quantitative by using a simplified crystal field model, retaining only second-order terms in the CEF Hamiltonian [48, 53, 54], to estimate B20B_{2}^{0} and B22B_{2}^{2} from the anisotropic Weiss temperatures. Whereas this approach gives a rather poor estimate of the absolute value of the CEF parameters (i.e. a wide range of possible values depending on how the parameters are estimated), we indeed observe a change in sign of both B20B_{2}^{0} and B22B_{2}^{2} from positive values for R=TbR = \mathrm{Tb}–Ho\mathrm{Ho} to negative values for R=Er,TmR = \mathrm{Er}, \mathrm{Tm}. Here, the zz-axis of the crystal field will correspond to the crystallographic bb-axis of the RAlGe series, which is the primary 2-fold rotation axis in the CmcmCmcm space group. From this reference frame, the xx- and yy- crystal field axes will align with the crystallographic cc- and aa-directions. As discussed explicitly in the Appendix, the evolution of the estimated B20B_{2}^{0} and B22B_{2}^{2} is consistent with the change from samples having an easy aa-axis to easy bb-axis on crossing from HoAlGe to ErAlGe. Because the absolute values of the CEF parameters are poorly determined by our simplified approach, we do not attempt to propose explicit CEF splitting schemes for the RAlGe compounds; however, in each case, diagonalizing the approximate CEF Hamiltonians indicates that the scale of the CEF splitting is largest for DyAlGe and TmAlGe, on the order of 150 K, and smallest (≈50\approx50 K) in HoAlGe and ErAlGe, results that are at least qualitatively consistent with the strength of the observed magnetic anisotropy in the RAlGe series. Finally, we note that point charge crystal field calculations, implemented in PyCrystalField [46], give qualitatively similar trends; however, the absolute values of the crystal field parameters and resulting eigenvalues are extremely sensitive to the charges assigned to the ligand atoms and therefor provide little quantitative guidance in determining appropriate crystal field schemes for the RAlGe. Ultimately inelastic neutron scattering data is needed to quantitatively determine and model the crystal field splitting.

Electronic band structure

Given the topological physics found in the tetragonal, light RR-based, RAlGe compounds, it is worth considering whether the orthorhombic, heavy RR members presented here may also support topological electronic states. This is further motivated by the observation of quantum oscillations in YAlGe (see Figure 3), which show that the non-magnetic band structure contains small pockets. To explore this question, we used DFT to calculate the electronic band structure of non-magnetic YAlGe. Figure 12a plots the projected density of states (PDOS) on atomic orbitals for YAlGe. While Ge 4s4s orbitals dominate the lower energy states from -11.0 to -8.0 eV, other orbitals hybridize strongly from -7.5 to +3.0 eV. The Fermi energy sits inside a pseudo-gap region spanning EF±1E_F \pm1 eV with the valence bands being derived from Ge 4p4p, Y 4d4d and Al 3p3p orbitals, while the conduction bands mostly from empty Y 4d4d orbitals. This pseudo-gap region is also reflected in the band dispersion as plotted in Figure 12b without and 12d with SOC. Between the highest valence and lowest conduction band, there is a sizable energy separation along most of the high-symmetry directions in the BZ, giving a local DOS minimum and pseudo-gap region near the EFE_F. Without SOC, Figure 12b shows that crossings along the Γ\Gamma–XX, Γ\Gamma–YY, YY–X1X1, X1X1–A1A1 and TT–YY directions form 4-fold degenerate nodal loops. With SOC in 12d, these nodal loops are all gapped out, giving a continuous gap between the highest valence and lowest conduction band, but not a global band gap. This continuous gap between the two band manifolds gives a well-defined topological index. From the Wilson loops plotted in 12c, the odd crossings for the Wannier charge centers on both kz=0.0k_z = 0.0 and kz=0.5k_z = 0.5 planes but not on other planes indicate a weak topological insulator phase is hosted in the system, albeit still with a finite Fermi surface, similar to what is observed in RhBi2_2. [55] The non-magnetic band structures of other RAlGe series are similar.

Electronic band structure of YAlGe

Figure 12. Electronic band structure of YAlGe. (a) Projected density of states (PDOS) on atomic orbitals. (b) Band structure without spin-orbit coupling (SOC). The inset shows the bulk Brillouin zone (BZ) and high-symmetry kk-points. (c) Wilson loop with Wannier charge centers (WCC) on kz=0.0k_z = 0.0 and kz=0.5k_z = 0.5 planes for (d) band structure with SOC. In (b) and (d), the highest valence (lowest conduction) band is colored in blue (red). (e)–(g) show the DFT calculated Fermi surface (FS) of the three bands crossing the Fermi level. The FS corresponds to the (e) next-valence, (f) highest-valence, and (c) lowest conduction bands, respectively. (h) is the combined FS from the three bands in (e–g).

To supplement the quantum oscillations observed in the magnetization isotherms, we also used DFT to calculate Fermi surfaces (FS). There are three bands crossing EFE_F, as seen in Figure 12d and their Fermi surfaces are plotted in Figure 12e-Figure 12h, with the combined FS shown in Figure 12h. The next valence band below the highest energy valence band only crosses EFE_F near the A1A1–TT direction and forms cone-shaped hole pockets as seen in Figure 12e. The valence band FS in Figure 12f is a skeleton spanning along the kyk_y (or the bb-axis) direction. The different sizes of the cross sections of the skeleton give cyclotron extremal orbits for quantum oscillations when H∥bH \parallel b. Our calculation shows three main frequencies at 30.8, 172.0 and 393.1 T, with the highest frequency agreeing reasonably well with the experimentally measured 354 T pocket in Figure 4c. The conduction band’s FS, shown in Figure 12g, occupies the two ends of the Brillouin zone opposite to the valence band FS, with no overlap between them, confirming a continuous gap. When H∥cH \parallel c, there are two main cyclotron extremal orbits. One is the cone-shaped FS from the next valence band and the second is from the valence band, which form two concentric extremal orbits near the A1A1–TT direction (see Figure 12h) with the frequencies of 229.0 and 321.1 T, respectively. Given that the average (275 T) of these two frequencies matches very closely the 272 T experimental value with an asymmetric shape as seen in Figure 12d, it is possible this frequency corresponds to scattering between the two 229 T and 321 T calculated pockets. These results and calculations motivate more detailed study, reserved for future work, of the of the quantum oscillations and Hall effect to further study electronic band structure, especially in the magnetically ordered states of moment-bearing members of the RAlGe series.

Summary and conclusions

We present a detailed study of the magnetization, electronic transport, and specific heat of the RAlGe family, where R=R = Y, Gd–Lu (except Yb). Whereas the light rare earth RAlGe variants (R=R = La–Gd) crystallize in a tetragonal structure, the heavy RAlGe materials adopt an orthorhombic CmcmCmcm crystal structure. Here, we find that the moment-bearing heavy RAlGe materials order antiferromagnetically at TNT_N ranging from 5 K (TmAlGe) to 39 K (TbAlGe). We also find a second, low temperature antiferromagnetic transition occurs at 6–8 K when R=R = Gd–Ho. Magnetization isotherms measured at 2 K reveal multiple metamagnetic transitions (under 70 kOe) for H∥aH \parallel a for R=R = Tb–Ho, whereas a single metamagnetic transition is observed with the field along the bb-axis when R=R = Er and Tm. While not explored here, the 2 K M(H)M(H) isotherms suggest the R=R = Tb–Ho members will have rich HH–TT phase diagrams. Transport measurements show metallic behavior and moderate positive magnetoresistance of 60–150% at T=T = 2 K. The field dependent magnetization measurements on non-moment bearing YAlGe show clear de Haas–van Alphen oscillations, suggesting small, high mobility pockets at the Fermi level. DFT calculations indicate the nonmagnetic band structure contains nodal loops that are gaped by spin-orbit coupling, supporting a weak topological insulator phase. The overview of physical properties presented here lays the foundation for future, more detailed work on individual RAlGe members.

Acknowledgments

Work at Ames National Laboratory was supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division. Ames National Laboratory is operated for the U.S. Department of Energy by Iowa State University under Contract No. DE-AC02-07CH11358. Some of the computation used resources of the National Energy Research Scientific Computing Center (NERSC), a DOE Office of Science User Facility. We thank Hanhbbit Rhee for beginning the crystal growth and characterization of the samples discussed in this paper.

*corresponding authors’ email: [email protected], [email protected]

Data Availability. The data that support the findings of this study will be made available in DataShare, an open-access repository at Iowa State University at DOI: 10.25380/ias-state.32226210.

Conflicts of Interest The authors have no conflicts of interest to declare.

Estimation of leading crystal field parameters

As outlined in the discussion section of the main text, the RAlGe (R=R = Tb–Tm) compounds show evidence for strong crystal field effects influencing the magnetic anisotropy and de Gennes scaling of TNT_N. Whereas the full CEF Hamiltonian for orthorhombic (CmcmCmcm) RAlGe, with rare earth atoms in m2mm2m point symmetry, is exceedingly complex, we can use a simplified Hamiltonian to estimate the leading crystal field parameters. If only the second-order terms are assumed to be dominant, an approximate CEF Hamiltonian can be expressed as

HCEF≈B20O20+B22O22(5)H_{\mathrm{CEF}} \approx B_{2}^{0}O_{2}^{0} + B_{2}^{2}O_{2}^{2} \tag*{(5)}

In this approximation, the CEF parameters can be directly related to the anisotropic Weiss temperatures obtained from Curie-Weiss fits to the magnetic susceptibility as follows [48, 53, 54]:

θa=θp+(2J−1)(2J+3)(B20+B22)/10kBθb=θp−(2J−1)(2J+3)B20/5kBθc=θp+(2J−1)(2J+3)(B20−B22)/10kB(6)\begin{aligned} \theta_a &= \theta_p + (2J - 1)(2J + 3)(B_{2}^{0} + B_{2}^{2})/10k_B \\ \theta_b &= \theta_p - (2J - 1)(2J + 3)B_{2}^{0}/5k_B \\ \theta_c &= \theta_p + (2J - 1)(2J + 3)(B_{2}^{0} - B_{2}^{2})/10k_B \tag*{(6)} \end{aligned}

where JJ is the total angular momentum for each respective rare-earth ion and θp\theta_p represents the paramagnetic Weiss temperature from only the molecular field. Here we assume the polycrystalline averaged M/HM/H gives a reasonable estimate of the magnetization without the influence of the crystal field so θp=θavg\theta_p = \theta_{\mathrm{avg}}. The anisotropic (M/H)−1(M/H)^{-1} curves and associated Curie-Weiss fits are shown in Figure 13.

Equations (A.2) provide several routes to estimate the leading crystal field parameters. Using θb\theta_b to determine B20B_{2}^{0}, B22B_{2}^{2} can then be independently estimated using either θa\theta_a or θc\theta_c. Alternatively, θa\theta_a and θc\theta_c can be used to determine B20B_{2}^{0} and B22B_{2}^{2} without use of θb\theta_b. The results of both approaches are plotted in Figure 11c and Figure 11d and reveal two main conclusions. First, B20B_{2}^{0} trends monotonically across the series and changes sign from positive for R=TbR = \mathrm{Tb}–Ho to negative for R=ErR = \mathrm{Er} and Tm. Second, the absolute value of both parameters, especially B22B_{2}^{2}, are poorly determined by this approach, with extreme results from differing calculations differing by an factor of nearly four for TbAlGe and TmAlGe. The wide range of possible values may reflect either unaccounted for uncertainties in the determination of the Weiss temperatures and/or the limitations of using a Hamiltonian truncated at second-order terms.

The absolute value of both parameters, especially B22B_{2}^{2}, are poorly determined by this approach, with extreme results from differing calculations differing by an factor of nearly four for TbAlGe and TmAlGe. The wide range of possible values may reflect either unaccounted for uncertainties in the determination of the Weiss temperatures and/or the limitations of using a Hamiltonian truncated at second-order terms.

Despite providing a relatively poor estimate of the absolute values of B20B_{2}^{0} and B22B_{2}^{2}, we can still gain useful information from the inferred crystal field parameters. The sign of B20B_{2}^{0} determines whether the system displays an easy zz-axis (if B20<0B_{2}^{0} < 0) or easy xyxy-plane (if B20>0B_{2}^{0} > 0), and B22B_{2}^{2} leads to further asymmetry between the xx- and yy-axes. In the reference frame with the zz- crystal field axis along the bb-axis of the RAlGe structure, the crystal field's xx- and yy-axis are along the respective cc- and aa- crystallographic directions. In this basis, a negative B20B_{2}^{0} will therefore favor an easy bb-axis, whereas if B20B_{2}^{0} is positive, a positive(negative) B22B_{2}^{2} will favor an easy a(c)a(c)-axis. Examining Fig. A.14 and using any set of the estimated parameters, we find positive B20B_{2}^{0} and B22B_{2}^{2} for R=TbR = \mathrm{Tb}–Ho samples, indicating an easy aa-axis and for R=ErR = \mathrm{Er}, Tm, a negative B20B_{2}^{0} is found, indicating an easy bb-axis. These qualitative observations support that the gross features of the magnetic anisotropy in the RAlGe (R=TbR = \mathrm{Tb}–Tm) series are dictated by the crystal field. In particular, the change from having an easy aa- to bb- axis on crossing from HoAlGe to ErAlGe is due to the changing sign of the leading B22B_{2}^{2} parameter.

Image not extracted

Figure A.14. Second-order crystal field parameters of the RAlGe R=TbR = \mathrm{Tb}–Tm\mathrm{Tm} series estimated using the experimental Weiss temperatures and Eqs. A.2. (a) B20B_{2}^{0} and (b) B22B_{2}^{2}.

Crystallographic tables

AtomSitexxyyzzOcc.UisoU_{\mathrm{iso}} (Å2^{2})
Ho4c10.18991(2)0.7510.00643(13)
Ge4c0.50.39318(6)0.7510.00687(15)
Al4a00.50.510.0082(3)

Table B.2. Atomic positions, site occupancies, and isotropic thermal displacement parameters for HoAlGe determined from single crystal X-ray diffraction refinement.

AtomU11U_{11}U22U_{22}U33U_{33}U23U_{23}U13U_{13}U12U_{12}
Ho0.00528(16)0.00652(17)0.00749(18)000
Ge0.0049(3)0.0070(3)0.0086(3)000
Al0.0059(8)0.0103(8)0.0083(8)0.0000(6)00

Table B.3. Anisotropic thermal displacement parameters (in Å2^{2}) for HoAlGe determined from single crystal X-ray diffraction refinement.

Chemical formulaHoAlGe
Formula weight (g/mol)264.5
Temperature297.49(10)
Wavelength (Å, Ag Kα\alpha)0.56087
Crystal systemorthorhombic
Space groupCmcmCmcm (#63)
Unit cell dimensions
aa4.0344(3) Å alpha = 90
bb10.3634(7) Å beta = 90
cc5.7290(4) Å gamma = 90
Volume (cm3^{3})239.53(3)
ZZ4
Calculated density (g/cm3^{3})7.335
Absorption coefficient (mm−1^{-1})24.024
Absorption Correctionmulti-scan
F(000)F(000)448
Crystal size (mm)0.28 x 0.19 x 0.1
theta range for data collection3.0840-31.537
Index ranges (min/max, hh, kk, ll)[-7/7, -18/19, -10/7]
Reflections collected2645
Independent reflections436 (Rint=0.0914R_{\mathrm{int}} = 0.0914)
Completeness100
Refinement methodFull-matrix least-squares on F2F^{2}
Data / restrains / parameters436 / 0 / 14
GOF1.043
Final RR indices [I>2σ(I)I > 2\sigma(I)]Robs=0.0283R_{\mathrm{obs}} = 0.0283, wRobs=0.0597wR_{\mathrm{obs}} = 0.0597
RR indices [all data]Rall=0.0293R_{\mathrm{all}} = 0.0293, wRall=0.0606wR_{\mathrm{all}} = 0.0606
Extinction coefficient0.078(3)
Largest diff. peak and hole (e-/Å3^{3})3.627 and -3.309

Table B.4. Single crystal X-ray diffraction data and structural refinement information for HoAlGe.

References

  1. [1]S.-Y. Xu, N. Alidoust, G. Chang, H. Lu, B. Singh, I. Belopolski, D. S. Sanchez, X. Zhang, G. Bian, H. Zheng, et al., Discovery of Lorentz-violating type II Weyl fermions in LaAlGe, Science advances 3 (6) (2017) e1603266.
  2. [2]G. Chang, B. Singh, S.-Y. Xu, G. Bian, S.-M. Huang, C.-H. Hsu, I. Belopolski, N. Alidoust, D. S. Sanchez, H. Zheng, et al., Magnetic and noncentrosymmetric Weyl fermion semimetals in the RAlGe family of compounds (R = rare earth), Physical Review B 97 (4) (2018) 041104.DOI
  3. [3]H. Flandorfer, D. Kaczorowski, J. Gröbner, P. Rogl, R. Wouters, C. Godart, A. Kostikas, The systems Ce–Al–Si, Ge: phase equilibria and physical properties, Journal of Solid State Chemistry 137 (2) (1998) 191–205.DOI
  4. [26]P. C. Canfield, New materials physics, Reports on Progress in Physics 83 (1) (2019) 016501.
  5. [27]P. C. Canfield, T. Kong, U. S. Kaluarachchi, N. H. Jo, Use of frit-disc crucibles for routine and exploratory solution growth of single crystalline samples, Philosophical Magazine 96 (1) (2016) 84–92.
  6. [28]Canfield crucible sets, https://lspceramics.com/canfield-crucible-sets-2/, accessed: 2022-03-23.
  7. [29]B. H. Toby, R. B. Von Dreele, GSAS-II: the genesis of a modern open-source all purpose crystallography software package, Journal of Applied Crystallography 46 (2) (2013) 544–549.
  8. [30]P. Hohenberg, W. Kohn, Inhomogeneous electron gas, Physical review 136 (3B) (1964) B864.
  9. [31]W. Kohn, L. J. Sham, Self-consistent equations including exchange and correlation effects, Physical review 140 (4A) (1965) A1133.
  10. [32]J. P. Perdew, K. Burke, M. Ernzerhof, Generalized gradient approximation made simple, Physical review letters 77 (18) (1996) 3865.
  11. [33]P. E. Blöchl, Projector augmented-wave method, Physical review B 50 (24) (1994) 17953.pubmed.ncbi.nlm.nih.gov/9976227
  12. [34]G. Kresse, J. Furthmüller, Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set, Computational materials science 6 (1) (1996) 15–50.
  13. [35]G. Kresse, J. Furthmüller, Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set, Physical review B 54 (16) (1996) 11169.
  14. [36]H. J. Monkhorst, J. D. Pack, Special points for brillouin-zone integrations, Physical review B 13 (12) (1976) 5188.
  15. [37]P. E. Blöchl, O. Jepsen, O. K. Andersen, Improved tetrahedron method for Brillouin-zone integrations, Physical Review B 49 (23) (1994) 16223.
  16. [38]N. Marzari, D. Vanderbilt, Maximally localized generalized Wannier functions for composite energy bands, Physical review B 56 (20) (1997) 12847.
  17. [39]I. Souza, N. Marzari, D. Vanderbilt, Maximally localized Wannier functions for entangled energy bands, Physical Review B 65 (3) (2001) 035109.
  18. [40]M. E. Fisher, Relation between the specific heat and susceptibility of an antiferromagnet, Philosophical Magazine 7 (82) (1962) 1731–1743.
  19. [41]M. E. Fisher, J. Langer, Resistive anomalies at magnetic critical points, Physical Review Letters 20 (13) (1968) 665.
  20. [42]S. Bud’ko, Z. Islam, T. Wiener, I. Fisher, A. Lacerda, P. Canfield, Anisotropy and metamagnetism in the RNi₂Ge₂ (R = Y, La–Nd, Sm–Lu) series, Journal of Magnetism and Magnetic Materials 205 (1) (1999) 53–78.
  21. [43]M. Hutchings, Point-Charge Calculations of Energy Levels of Magnetic Ions in Crystalline Electric Fields, Vol. 16 of Solid State Physics, Academic Press, 1964. doi:https://doi.org/10.1016/S0081-1947(08)60517-2.
  22. [44]D. Noakes, G. Shenoy, The effect of a crystalline electric field on the magnetic transition temperatures of rare-earth rhodium borides, Physics Letters A 91 (1) (1982) 35–36.
  23. [45]B. Dunlap, Crystalline electric field effects on the paramagnetic susceptibility of polycrystalline materials, Journal of magnetism and magnetic materials 37 (2) (1983) 211–214.
  24. [46]A. Scheie, PyCrystalField: software for calculation, analysis and fitting of crystal electric field Hamiltonians, Applied Crystallography 54 (1) (2021) 356–362.
  25. [47]K. Stevens, Matrix elements and operator equivalents connected with the magnetic properties of rare earth ions, Proceedings of the Physical Society. Section A 65 (3) (1952) 209–215.
  26. [48]Y. Hashimoto, H. Fujii, H. Fujiwara, T. Okamoto, Magnetic Properties of Rare Earth Copper Intermetallic Compounds, RCu₂. I. Heavy Rare Earth., Journal of the Physical Society of Japan 47 (1) (1979) 67–72.
  27. [49]E. Morosan, S. L. Bud’ko, P. Canfield, M. Torikachvili, A. Lacerda, Thermodynamic and transport properties of RAgGe (R = Tb–Lu) single crystals, Journal of magnetism and magnetic materials 277 (3) (2004) 298–321.
  28. [50]P. Boutron, Exact Calculation of the Paramagnetic Susceptibility of a Single Crystal with Arbitrary Crystal Field and Exchange Interactions, Phys. Rev. B 7 (1973) 3226–3238. doi:10.1103/PhysRevB.7.3226.
  29. [51]X. Zhang, Z. Liu, Q. Cui, Q. Guo, N. Wang, L. Shi, H. Zhang, W. Wang, X. Dong, J. Sun, et al., Electronic and magnetic properties of intermetallic kagome magnets RV₆Sn₆ (R = Tb–Tm), Physical Review Materials 6 (10) (2022) 105001.
  30. [52]J. Lee, E. Mun, Anisotropic magnetic property of single crystals RV₆Sn₆ (R = Y, Gd-Tm, Lu), Physical Review Materials 6 (8) (2022) 083401.
  31. [53]Y.-L. Wang, Crystal-field effects of paramagnetic Curie temperature, Physics Letters A 35 (5) (1971) 383–384.
  32. [54]N. Shohata, Magnetic properties of rare earth gallium intermetallic compounds, Journal of the Physical Society of Japan 42 (6) (1977) 1873–1880.
  33. [55]K. Lee, G. F. Lange, L.-L. Wang, B. Kuthanazhi, T. V. Trevisan, N. H. Jo, B. Schrunk, P. P. Orth, R.-J. Slager, P. C. Canfield, A. Kaminsky, Discovery of a weak topological insulating state and van Hove singularity in triclinic RhBi₂, Nature communications 12 (1) (2021) 1855.DOI

Paper details

vlnc:W_95ugm52r
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 5

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents