betaFeedback

WorksPhysics and Astronomy

Shift current conductivity in monolayer SnS: a tight-binding analysis

Abstract

We investigate the bulk photovoltaic effect in monolayer SnS using an effective tight-binding model derived from first-principles calculations. By comparing short-range and long-range hopping models, we show that the essential features of the shift current conductivity are captured by a minimal model. The shift current is decomposed into transition intensity and shift vector, enabling identification of dominant interband transitions. The comparison reveals that long-range hopping processes quantitatively modify the peak positions and magnitudes, while the short-range model retains the characteristic low-energy structure of the nonlinear response. Our findings provide a transparent framework for understanding and designing bulk photovoltaic effects in two-dimensional materials.

Introduction

The bulk photovoltaic effect (BPVE) has emerged as a promising mechanism for light-to-electricity conversion beyond the conventional p–n junction paradigm, as it enables the generation of photocurrent in non-centrosymmetric materials without requiring built-in electric fields [1–4]. In particular, the shift current, one of the dominant contributions to BPVE, originates from the real-space displacement of electron wave packets during optical excitation and is closely related to the geometric properties of Bloch wavefunctions [2, 4–6]. This intrinsic mechanism has attracted considerable attention for its potential to exceed the Shockley–Queisser limit and for its robustness against scattering processes [3, 7–9].

Recent advances in two-dimensional (2D) materials have opened new opportunities for realizing efficient BPVE. In contrast to bulk ferroelectrics, several 2D systems exhibit strong in-plane ferroelectric polarization, which is less susceptible to depolarization effects when interfaced with electrodes [10–12]. Among them, group-IV monochalcogenides such as SnS have attracted particular interest due to their puckered crystal structures, strong in-plane ferroelectricity, and pronounced electronic anisotropy [12–14]. Experimentally, monolayer SnS has been successfully synthesized and shown to exhibit purely in-plane ferroelectricity at room temperature, confirmed by piezoresponse force microscopy [15–17]. These features make monolayer SnS a promising platform for investigating nonlinear optical responses and for designing next-generation optoelectronic devices.

While first-principles calculations have provided valuable insights into BPVE in various materials, they often offer limited physical transparency regarding the microscopic origin of the shift current [3, 14, 18]. In particular, it remains challenging to identify which interband transitions and regions in momentum space dominantly contribute to the photocurrent, and how these contributions are governed by the underlying electronic structure. For the purpose of material design, it is therefore desirable to construct simplified yet quantitatively reliable models that can elucidate the essential mechanisms of BPVE in an intuitive manner [9].

In this work, we develop an effective tight-binding framework for monolayer SnS based on Wannier function interpolation of first-principles calculations, and use it to systematically investigate its nonlinear optical response. By constructing both short-range (SR) and long-range (LR) hopping models, we demonstrate that the essential features of the shift current conductivity can be captured within a minimal model, while extended hopping improves quantitative accuracy. Furthermore, we provide an intuitive decomposition of the shift current in terms of the transition intensity and the shift vector, enabling a clear identification of the dominant contributions in both energy and momentum space.

Our analysis clarifies how specific interband transitions near the band gap contribute to the observed spectral features and how these contributions are modified by the hopping range in the effective model. These findings establish a transparent connection between electronic structure, symmetry, and nonlinear optical response, and provide practical design principles for optimizing BPVE in low-dimensional materials.

This paper is organized as follows. In § 2, we present the electronic structure of monolayer SnS and construct effective tight-binding models. In § 3, we discuss the linear optical response as a benchmark for validating the model. In § 4, we formulate the shift current conductivity and introduce its decomposition in terms of physically intuitive quantities, followed by a detailed analysis of the calculated results. Finally, § 5 summarizes our findings. In Appendix A, we provide the explicit form of the Hamiltonian for the SR model. In Appendix B, we provide a detailed derivation of the shift current conductivity within the length-gauge and velocity-gauge formalisms. In Appendix § 10, we present contour plots of the shift vector and transition intensity, which provide an intuitive understanding of the shift current conductivity in momentum space.

Electronic Structure of Monolayer SnS

Crystal structure

Monolayer tin sulfide (SnS) is a two-dimensional semiconductor belonging to the group-IV monochalcogenides (XS, XSe; X = Sn, Ge), which have attracted considerable interest due to their intrinsic ferroelectricity and strong in-plane anisotropy [12, 14]. In contrast to conventional ferroelectrics, monolayer SnS exhibits robust in-plane polarization originating from its puckered lattice structure along the armchair direction, making it particularly suitable for nanoscale device applications.

The crystal structure of monolayer SnS is shown in Figure 1. The unit cell consists of two Sn atoms and two S atoms arranged in a rectangular lattice. The puckered configuration breaks inversion symmetry and leads to a finite spontaneous polarization within the plane. Due to this puckered structure, monolayer SnS retains a large spontaneous polarization even at elevated temperatures, making it a promising candidate for ferroelectric and optoelectronic applications [12, 19].

Image not extracted

Figure 1. Crystal structure and Brillouin zone of monolayer SnS. (a) Top view of the lattice, where the green rectangle denotes the primitive unit cell containing two Sn atoms and two S atoms. (b) Side views along the armchair and zigzag directions, highlighting the puckered geometry that breaks inversion symmetry and gives rise to in-plane ferroelectric polarization. (c) First Brillouin zone with high-symmetry points Γ\Gamma, X, Y, and S used in the band structure calculations. (d) Energy band structure (left panel) and DOS (right panel) of monolayer SnS along high-symmetry points in the first Brillouin zone. Red circles represent the DFT results, while black lines denote the Wannier-based tight-binding model.

Effective tight-binding model

The electronic structure of monolayer SnS was investigated within the framework of density functional theory (DFT) using the Vienna Ab initio Simulation Package (VASP) [20, 21]. The projector augmented-wave (PAW) method [22] was employed, and the exchange–correlation functional was treated within the generalized gradient approximation (GGA) in the Perdew–Burke–Ernzerhof (PBE) form [23]. To avoid spurious interactions between periodic images, a vacuum region larger than 15 Å was introduced along the out-of-plane direction. The plane-wave cutoff energy was set to 440 eV, and the Brillouin zone (BZ) was sampled using a Γ-centered Monkhorst–Pack grid of 16×16×116 \times16 \times1 [24]. The total energy convergence criterion was set to 10−1010^{-10} eV.

To analyze the low-energy electronic structure relevant to optical transitions, we construct an effective tight-binding model based on maximally localized Wannier functions (MLWFs) [25, 26, 27]. The Wannier functions were generated using the Wannier90 code [28], starting from the DFT band structure. The resulting Wannier-interpolated Hamiltonian provides an accurate description of the bands near the band gap while significantly reducing the computational cost for evaluating optical responses.

Linear optical response of monolayer SnS

Figure 1(d) shows the density of states (DOS) and the comparison between the DFT band structure and the Wannier-based tight-binding model. The excellent agreement demonstrates that the constructed model faithfully reproduces the essential features of the electronic structure in the energy window of interest.

The constructed tight-binding model accurately captures the band gap and symmetry-protected degeneracies along the Y→S→XY \rightarrow S \rightarrow X path in the Brillouin zone. The effective Hamiltonian is represented by a 12×1212 \times12 matrix, reflecting the pp-orbital manifold of Sn and S atoms that dominates the low-energy electronic structure. This Wannier-based formulation enables an efficient and physically transparent analysis of optical and nonlinear response functions in monolayer SnS. The details of the effective tight-binding models with different hopping ranges are described in Appendix A.

In this section, we investigate the linear optical response of monolayer SnS using the effective tight-binding models introduced in Sec. IIB. To balance computational efficiency and accuracy, we consider two models with different hopping ranges: a short-range (SR) model including only nearest-neighbor hopping terms, and a long-range (LR) model incorporating extended hopping processes, as illustrated in Figure 2.

Image not extracted

Figure 2. Tight-binding models with different hopping ranges. (a) Short-range (SR) model including only nearest-neighbor hopping. (b) Long-range (LR) model including extended hopping processes. The green regions indicate the unit cells, and a1a_1 and a2a_2 denote the lattice vectors.

Figure 3 shows the corresponding band structures obtained from the two models. The LR model reproduces the dispersion near the band edges more accurately, while the SR model captures the essential low-energy features relevant to optical transitions.

Image not extracted

Figure 3. Band structures of monolayer SnS obtained from (a) the SR model and (b) the LR model. The SR model captures the essential band gap and symmetry-protected degeneracies along the Y→S→XY \to S \to X path, while the LR model improves quantitative accuracy.

When an external electromagnetic field is applied, the induced current density is described within linear response theory as

Ji(1)(ω)=∑jσij(ω)Ej(ω),(1)J_i^{(1)}(\omega) = \sum_j \sigma_{ij}(\omega) E_j(\omega), \tag*{(1)}

where Ej(ω)E_j(\omega) is the electric field component. The linear optical conductivity σij(ω)\sigma_{ij}(\omega) is calculated using the Kubo formula [29] [2]:

σij(ω)=iℏe2S∑k∑n,mf(Enk)−f(Emk)Emk−Enk⋅⟨unk∣v^i∣umk⟩⟨umk∣v^j∣unk⟩Emk−Enk−ℏω−iη,(2)\sigma_{ij}(\omega) = \frac{i\hbar e^2}{S} \sum_k \sum_{n,m} \frac{f(E_{nk}) - f(E_{mk})}{E_{mk} - E_{nk}} \cdot\frac{\langle u_{nk}|\hat{v}_i|u_{mk}\rangle\langle u_{mk}|\hat{v}_j|u_{nk}\rangle}{E_{mk} - E_{nk} - \hbar\omega- i\eta}, \tag*{(2)}

where ∣unk⟩|u_{nk}\rangle is the cell-periodic Bloch function, and f(Enk)f(E_{nk}) is the Fermi-Dirac distribution.

The velocity operator is given by

v^k=1ℏ∇kH^(k).(3)\hat{v}_{k} = \frac{1}{\hbar}\nabla_{k}\hat{H}(k). \tag*{(3)}

In the static limit, the transverse conductivity is related to the Berry curvature [30]:

σxy=e2ℏ1S∑kΩz(k),(4)\sigma_{xy} = \frac{e^2}{\hbar}\frac{1}{S}\sum_k \Omega^z(k), \tag*{(4)}

where the Berry curvature is defined as

Ωz(k)=−2ℏ2Im⁡∑nf(Enk)∑m≠n⟨unk∣v^x∣umk⟩⟨umk∣v^y∣unk⟩(Emk−Enk)2.(5)\Omega^z(k) = -2\hbar^2 \operatorname{Im}\sum_n f(E_{nk})\sum_{m\ne n}\frac{\langle u_{nk}|\hat{v}_x|u_{mk}\rangle\langle u_{mk}|\hat{v}_y|u_{nk}\rangle}{(E_{mk}-E_{nk})^2}. \tag*{(5)}

Although the Berry curvature is locally finite due to inversion symmetry breaking, its integral over the Brillouin zone vanishes, resulting in σxy=0\sigma_{xy}=0. This is consistent with time-reversal symmetry, which forbids an intrinsic Hall response in monolayer SnS [30].

Figure 4 summarizes the Berry curvature and the linear optical response of monolayer SnS. Figure 4(a) shows the Berry curvature Ωz(k)\Omega^z(k) calculated using the LR model. The Berry curvature exhibits an anisotropic distribution in the first Brillouin zone, reflecting the reduced symmetry of monolayer SnS. Figure 4(b) compares the longitudinal optical conductivity σxx(ω)\sigma_{xx}(\omega) obtained from the SR and LR models. The SR model reproduces the main low-energy spectral features of the LR model, while the inclusion of longer-range hoppings modifies the peak positions and detailed spectral shapes. In particular, the peak heights in the linear optical conductivity are relatively similar between the two models compared with the shift-current spectra discussed in Sec. IV.B.

Image not extracted

Figure 4. Berry curvature and optical conductivity of monolayer SnS. (a) Berry curvature Ωz(k)\Omega^{z}(\mathbf{k}) in the first Brillouin zone calculated using the LR model. The anisotropic distribution reflects inversion symmetry breaking. (b) Longitudinal optical conductivity σxx(ω)\sigma_{xx}(\omega) for the SR and LR models. The LR model provides quantitative accuracy, while the SR model captures essential features.

The linear response formulation provides the basis for analyzing the nonlinear optical response, including the bulk photovoltaic effect, which is discussed in the following section [5, 14].

Shift Current in Monolayer SnS

Formalism

In this section, we investigate the bulk photovoltaic effect in monolayer SnS, focusing on the shift current contribution. The shift current originates from the real-space displacement of electron wave packets during optical excitation and is governed by the geometric properties of Bloch states.

We employ the standard length-gauge formulation of nonlinear optical response developed in Refs. [31] [2, 5]. The detailed derivation of the shift current conductivity is provided in Appendix B. Here, we present the final expression and its physical interpretation.

The shift current conductivity is expressed as

σijkshift(0;ω,−ω)=−iℏe32S∑k∑n,mfnmEmn2(Emn−ℏω−iη)(αmnjk(k)Rnmik(k)+αmnkj(k)Rymij(k))(6)\sigma_{ijk}^{\mathrm{shift}}(0;\omega,-\omega)=-\frac{i\hbar e^3}{2S}\sum_k\sum_{n,m}\frac{f_{nm}}{E_{mn}^2(E_{mn}-\hbar\omega-i\eta)}\left(\alpha_{mn}^{jk}(k)R_{nm}^{ik}(k)+\alpha_{mn}^{kj}(k)R_{ym}^{ij}(k)\right) \tag*{(6)}

where Emn=Emk−EnkE_{mn}=E_{mk}-E_{nk}, fnm=f(Enk)−f(Emk)f_{nm}=f(E_{nk})-f(E_{mk}), and SS is the unit cell area. The transition intensity is defined as

αmnjk(k)=vnmjvmnk,(7)\alpha_{mn}^{jk}(k)=v_{nm}^{j}v_{mn}^{k}, \tag*{(7)}

and Rnmij(k)R_{nm}^{ij}(k) is the shift vector.

The shift vector is given by

Rnmij(k)=∂kiϕnmj+ξnni−ξmmi,(8)R_{nm}^{ij}(k)=\partial_{k_i}\phi_{nm}^{j}+\xi_{nn}^{i}-\xi_{mm}^{i}, \tag*{(8)}

where ϕnmj\phi_{nm}^{j} is the phase of the velocity matrix element vnmjv_{nm}^{j}, and ξmmi=i⟨umk∣∂ki∣umk⟩\xi_{mm}^{i}=i\langle u_{mk}|\partial_{k_i}|u_{mk}\rangle is the Berry connection.

Equation (6) provides a transparent physical picture of the shift current. The nonlinear response is determined by the product of the transition intensity αmnjk(k)\alpha_{mn}^{jk}(k) and the shift vector Rnmij(k)R_{nm}^{ij}(k), which represents the real-space displacement of the electron wave packet during optical excitation.

In monolayer SnS, the absence of inversion symmetry allows for a finite shift current response. In addition, the crystal symmetry restricts the nonzero components of the shift-current conductivity tensor. For linearly polarized light incident from the zz-direction, the symmetry-allowed components are σxxxshift\sigma_{xxx}^{\mathrm{shift}}, σxyyshift\sigma_{xyy}^{\mathrm{shift}}, and σyxyshift=σyyxshift\sigma_{yxy}^{\mathrm{shift}}=\sigma_{yyx}^{\mathrm{shift}}, whereas the other components vanish. In the following, we analyze these symmetry-allowed components based on the effective tight-binding models.

Figure 5 schematically illustrates the shift-current mechanism in monolayer SnS in terms of the transition intensity and shift vector. The transition intensity describes the strength of the optical transition, while the shift vector represents the real-space displacement of the electron wave packet during optical excitation. In the following subsection, we evaluate the symmetry-allowed components using the SR and LR tight-binding models and analyze how the hopping range modifies the shift-current spectra.

Image not extracted

Figure 5. Schematic illustration of the shift current mechanism in monolayer SnS. (a) Real-space picture of photoexcited carrier displacement. (b) Interband transition between valence and conduction bands, characterized by the transition intensity and shift vector.

The comparison between the SR and LR models reveals that the essential features of the shift current are already captured by the SR model, while the LR model provides quantitative corrections. This indicates that the shift current in monolayer SnS is primarily governed by the low-energy electronic structure.

These results establish a clear connection between electronic structure, symmetry, and nonlinear optical response, and provided useful insights for designing materials with enhanced bulk photovoltaic effects.

Shift Current Conductivity in Monolayer SnS

We calculate the shift current conductivity of monolayer SnS under linearly polarized light incidence. Monolayer SnS belongs to the Pmn21Pmn2_1 space group. Due to its symmetry, the shift current conductivity components σxxxshift\sigma_{xxx}^{\mathrm{shift}}, σxyyshift\sigma_{xyy}^{\mathrm{shift}}, and σyxyshift=σyyxshift\sigma_{yxy}^{\mathrm{shift}}=\sigma_{yyx}^{\mathrm{shift}} are finite when linearly polarized light is incident from the zz-direction. All other components vanish. Figure 6 shows the calculated shift current conductivity obtained using both the SR and LR models. It is evident that all three shift current conductivity components exhibit higher peak values in the SR model.

Image not extracted

Figure 6. The real part of shift current conductivities σxyyshift\sigma^{\mathrm{shift}}_{xyy} (left panel), σxxxshift\sigma^{\mathrm{shift}}_{xxx} (center panel) and σyxyshift\sigma^{\mathrm{shift}}_{yxy} (right panel) for monolayer SnS. The unit of shift current conductivity is e3/ℏe^3/\hbar.

To clarify the origin of the different peak magnitudes between the SR and LR models, we further analyze the momentum-resolved contribution to the shift-current conductivity σxyyshift\sigma^{\mathrm{shift}}_{xyy} at the representative low-energy peaks in the left panel of Figure 6. Figure 7 shows the resulting kk-resolved contribution to Re⁡[σxyyshift]\operatorname{Re}[\sigma^{\mathrm{shift}}_{xyy}] before the Brillouin-zone summation, evaluated at ℏω=2.92\hbar\omega= 2.92 eV for the SR model and ℏω=2.43\hbar\omega= 2.43 eV for the LR model. The SR model exhibits pronounced local contributions along the resonant regions of the Brillouin zone. In contrast, the corresponding contributions in the LR model are less pronounced and more broadly distributed. The stronger local contributions in the SR model are consistent with the larger peak observed in the shift-current spectrum. This indicates that the SR–LR difference is governed by the momentum-space distribution of the full shift-current integrand, including the transition matrix elements, the shift-vector-related numerator, and the resonance denominator, rather than by the band-energy structure alone. This behavior contrasts with the linear optical response, where the shift-vector-related numerator is absent, and highlights the sensitivity of the shift-current response to the detailed momentum-space structure of the electronic states. Therefore, the SR model captures the qualitative low-energy features of the shift-current response, whereas the LR model is necessary for a more quantitatively reliable description.

Image not extracted

Figure 7. Momentum-resolved contribution to Re⁡[σxyyshift]\operatorname{Re}[\sigma^{\mathrm{shift}}_{xyy}] at the representative low-energy peaks of Figure 6. (a) and (b) show the SR and LR models evaluated at ℏω=2.92\hbar\omega=2.92 eV and 2.432.43 eV, respectively. The plotted quantity is the shift-current integrand before Brillouin-zone summation, including the same resonance denominator and broadening factor as in the spectral calculation, with the overall prefactor omitted.

For completeness, Appendix C presents band-resolved contour plots of the shift vector Rnmij(k)R^{ij}_{nm}(\mathbf{k}) and transition intensity αmnjk=vmnjvnmk\alpha^{jk}_{mn}=v^{j}_{mn}v^{k}_{nm} for selected interband transitions near the band gap. The band indices are defined by the ascending order of the eigenvalues in the band structure shown in Figure 3.

Conclusion

In this study, we theoretically investigated the electronic structure and optical properties of monolayer SnS. Two effective tight-binding models with different hopping ranges were constructed using maximally localized Wannier functions to reproduce the energy band structure near the band gap. For the first-order optical response, we confirmed that monolayer SnS exhibits finite longitudinal conductivity, validating the SR model. We also demonstrated that Berry curvature originates from inversion symmetry breaking and reverses sign under wavevector inversion, resulting in vanishing transverse conductivity. For the second-order nonlinear optical response, we showed that monolayer SnS generates a shift current under linearly polarized light without external strain, unlike centrosymmetric materials that require strain for BPVE. Furthermore, our simplified SR model successfully captures the essential features of shift current conductivity. These findings provide a transparent framework for understanding shift current responses in monolayer SnS and related non-centrosymmetric 2D materials.

Acknowledgments

This work was supported by JSPS KAKENHI (Grants No. JP25K01609, No. JP22H05473, and No. JP21H01019), JST CREST (Grant No. JPMJCR19T1). K. W. acknowledges the financial support for Basic Science Research Projects (Grant No. 2401203) from the Sumitomo Foundation, and the special individual research support from Kwansei Gakuin University. T. K. acknowledges the Sasakawa Scientific Research Grant from The Japan Science Society.

Details of the Hamiltonian in the SR model

Here, we present the Hamiltonian of the short-range (SR) tight-binding model for monolayer SnS. Figure 8 shows the lattice structure. The shaded rhombus denotes the primitive unit cell, which contains four nonequivalent atomic sites labeled A, B, C, and D.

Image not extracted

Figure 8. Top view of the lattice structure of monolayer SnS. The shaded rhombus indicates the primitive unit cell containing four nonequivalent sites (A–D).

The primitive lattice vectors are given by a1=(4.28,0)\mathbf{a}_1=(4.28,0) and a2=(0,4.08)\mathbf{a}_2=(0,4.08). The position vectors of the atomic sites are defined as rA=(0.473,3.06)\mathbf{r}_A=(0.473,3.06), rB=(2.61,1.02)\mathbf{r}_B=(2.61,1.02), rC=(2.29,1.02)\mathbf{r}_C=(2.29,1.02), and rD=(0.15,3.06)\mathbf{r}_D=(0.15,3.06), respectively.

In monolayer SnS, the electronic states near the band gap are mainly derived from the pp orbitals of Sn and S atoms. Since the unit cell contains two Sn atoms and two S atoms, the effective tight-binding model is constructed from 12 Wannier orbitals, corresponding to three orbitals per atomic site, resulting in a 12×1212 \times12 Hamiltonian.

The SR model includes only nearest-neighbor hopping terms. The eigenvalue equation is given by

H(k)∣ψnk⟩=Enk∣ψnk⟩(9)H(\mathbf{k})|\psi_{n\mathbf{k}}\rangle=E_{n\mathbf{k}}|\psi_{n\mathbf{k}}\rangle \tag*{(9)}

where H(k)H(\mathbf{k}) is the Bloch Hamiltonian at wavevector k=(kx,ky)\mathbf{k}=(k_x,k_y), and EnkE_{n\mathbf{k}} is the eigenenergy with band index n=1,2,…,12n=1,2,\ldots,12.

The matrix elements of H(k)H(\mathbf{k}) are written as

hαβ(k)={γαβeik⋅ταβ,(α,β)∈{(A,D),(D,A),(B,C),(C,B)},γαβ(eik⋅ταβ+e−ik⋅ταβ),otherwise,(10)h_{\alpha\beta}(\mathbf{k})= \begin{cases} \gamma_{\alpha\beta}e^{i\mathbf{k}\cdot\boldsymbol{\tau}_{\alpha\beta}}, & (\alpha,\beta)\in\{(A,D),(D,A),(B,C),(C,B)\},\\ \gamma_{\alpha\beta}\left(e^{i\mathbf{k}\cdot\boldsymbol{\tau}_{\alpha\beta}}+e^{-i\mathbf{k}\cdot\boldsymbol{\tau}_{\alpha\beta}}\right), & \text{otherwise}, \end{cases} \tag*{(10)}

where γαβ\gamma_{\alpha\beta} (in eV) is the hopping parameter between orbitals α\alpha and β\beta, as listed in Table I. The relative displacement vector between sites is defined as ταβ=rβ−rα\boldsymbol{\tau}_{\alpha\beta}=\mathbf{r}_{\beta}-\mathbf{r}_{\alpha}.

A1A_1A2A_2A3A_3B1B_1B2B_2B3B_3C1C_1C2C_2C3C_3D1D_1D2D_2D3D_3
A1A_1-1.927-0.029-0.001-0.1180.109-0.032-1.4470.6410.0022.0390.0920.000
A2A_2-0.029-0.872-0.001-0.0780.312-0.0570.7212.433-0.087-0.320-0.3800.000
A3A_3-0.001-0.0010.010-0.0270.027-0.187-0.024-0.0862.8920.0000.000-0.573
B1B_1-0.118-0.078-0.027-1.9270.029-0.0012.039-0.0920.000-1.457-0.6750.012
B2B_20.1090.3120.0270.029-0.8720.0010.320-0.3800.000-0.7522.5500.074
B3B_3-0.032-0.057-0.187-0.0010.0010.0100.0000.000-0.573-0.0070.0682.838
C1C_1-1.4470.721-0.0242.0390.3200.000-3.9180.0380.0000.565-0.191-0.028
C2C_20.6412.433-0.086-0.092-0.3800.0000.038-4.333-0.0010.2410.407-0.016
C3C_30.002-0.0872.8920.0000.000-0.5730.000-0.001-4.170-0.037-0.0180.243
D1D_12.039-0.3200.000-1.457-0.752-0.0070.5650.241-0.037-3.918-0.0380.000
D2D_20.092-0.3800.000-0.6752.5500.068-0.1910.407-0.018-0.038-4.3330.001
D3D_30.0000.000-0.5730.0120.0742.838-0.028-0.0160.2430.0000.001-4.170

Table I. Hopping parameters γαβ\gamma_{\alpha\beta} of the short-range (SR) tight-binding model for monolayer SnS (in eV). The indices AA, BB, CC, and DD denote atomic sites, and the subscripts 1, 2, and 3 correspond to the three pp orbitals at each site.

This formulation provides a minimal yet physically transparent model that captures the essential low-energy electronic structure relevant to optical transitions.

Derivation of Shift Current Conductivity

In this appendix, we derive the shift current conductivity σijkshift(0;ω,−ω)\sigma^{\mathrm{shift}}_{ijk}(0;\omega,-\omega) within the length-gauge formalism and the velocity-gauge formalism, following Refs. [31] [2, 5].

Second-order optical response

We consider the interaction of a crystalline solid with a monochromatic light field in the length gauge. The perturbation Hamiltonian is given by

H′(t)=e∑jEj(t)r^j,(11)H'(t) = e \sum_j E_j(t)\hat{r}_j, \tag*{(11)}

where r^j\hat{r}_j is jj element of the position operator r^\hat{\mathbf{r}} and Ej(t)=Eje−iωt+Ej∗eiωtE_j(t)=E_j e^{-i\omega t}+E_j^*e^{i\omega t}. The dynamics of the density matrix ρ^=ρ^(0)+ρ^(1)+ρ^(2)+⋯\hat{\rho}=\hat{\rho}^{(0)}+\hat{\rho}^{(1)}+\hat{\rho}^{(2)}+\cdots are governed by the von Neumann equation

iℏ∂ρ^∂t=[H0+H′(t),ρ^].(12)i\hbar\frac{\partial\hat{\rho}}{\partial t}=[H_0+H'(t),\hat{\rho}]. \tag*{(12)}

At equilibrium, ρ^(0)\hat{\rho}^{(0)} is given by the Fermi–Dirac distribution. Solving perturbatively, the first-order density matrix element in the band basis is

ρnm(1)(ω)=efnmrnmjEj(ω)Emn−ℏω−iη,(13)\rho^{(1)}_{nm}(\omega)=\frac{e f_{nm}r^j_{nm}E_j(\omega)}{E_{mn}-\hbar\omega-i\eta}, \tag*{(13)}

where fnm=f(Enk)−f(Emk)f_{nm}=f(E_{nk})-f(E_{mk}) and rnmj=⟨unk∣r^⋅ej∣umk⟩r^j_{nm}=\langle u_{nk}|\hat{\mathbf{r}}\cdot\mathbf{e}_j|u_{mk}\rangle is the matrix element of the r^j\hat{r}_j between states nn and mm. Similarly, the second-order density matrix is obtained as

ρnm(2)(ω+ω′;ω,ω′)=e2Emn−ℏ(ω+ω′)+iη∑l(flmrnlkrlmjEml−ℏω+iη−fnlrnlkrlmjEln−ℏω+iη)Ej(ω)Ek(ω′),(14)\rho^{(2)}_{nm}(\omega+\omega';\omega,\omega')=\frac{e^2}{E_{mn}-\hbar(\omega+\omega')+i\eta}\sum_l\left(\frac{f_{lm}r^k_{nl}r^j_{lm}}{E_{ml}-\hbar\omega+i\eta}-\frac{f_{nl}r^k_{nl}r^j_{lm}}{E_{ln}-\hbar\omega+i\eta}\right)E_j(\omega)E_k(\omega'), \tag*{(14)}

where ω\omega and ω′\omega' are the frequencies of the incident light from jj and kk directions, respectively.

Shift current conductivity

For charge current operator JJ, the thermal expectation value of JJ is given as

⟨J⟩=Tr⁡(Jρ(t)).(15)\langle J\rangle=\operatorname{Tr}(J\rho(t)). \tag*{(15)}

The DC second-order current is expressed as

Ji(2)=∑jkσijk(2)(0;ω,ω′)Ej(ω)Ek(ω′),(16)J_i^{(2)}=\sum_{jk}\sigma_{ijk}^{(2)}(0;\omega,\omega')E_j(\omega)E_k(\omega'), \tag*{(16)}

where σijk(2)(0;ω,ω′)\sigma_{ijk}^{(2)}(0;\omega,\omega') is the second-order conductivity tensor. In this paper, we focus on the photocurrent generated by BPVE, which corresponds to the case of ω′=−ω\omega'=-\omega. We can rewrite the second-order conductivity as

σijk(2)(0;ω,−ω)=σijkshift(0;ω,−ω)+σijkinjection(0;ω,−ω),(17)\sigma_{ijk}^{(2)}(0;\omega,-\omega)=\sigma_{ijk}^{\mathrm{shift}}(0;\omega,-\omega)+\sigma_{ijk}^{\mathrm{injection}}(0;\omega,-\omega), \tag*{(17)}

where σijkshift\sigma^{\mathrm{shift}}_{ijk} and σijkinjection\sigma^{\mathrm{injection}}_{ijk} are the shift and injection current contributions, respectively.

Under linearly polarized light irradiation, the optical conductivities of the shift current σijkshift(0;ω,−ω)\sigma^{\mathrm{shift}}_{ijk}(0;\omega,-\omega) and the injection current σijkinjection(0;ω,−ω)\sigma^{\mathrm{injection}}_{ijk}(0;\omega,-\omega) are given by [32, 33] [2]

σijkshift=e32ℏS∑k∑n,mfnmEmn−ℏω−iη(rmnjrnm;ik+rmnkrnm;ij)(18)\sigma^{\mathrm{shift}}_{ijk}=\frac{e^3}{2\hbar S}\sum_k\sum_{n,m}\frac{f_{nm}}{E_{mn}-\hbar\omega-i\eta}\left(r^j_{mn}r^k_{nm;i}+r^k_{mn}r^j_{nm;i}\right) \tag*{(18)}
σijkinjection(0;ω,−ω)=ie32ℏSτ∑k∑nmfnmEmn−ℏω−iηΔnmi{rmnk,rnmj}(19)\sigma^{\mathrm{injection}}_{ijk}(0;\omega,-\omega)=\frac{ie^3}{2\hbar S}\tau\sum_k\sum_{nm}\frac{f_{nm}}{E_{mn}-\hbar\omega-i\eta}\Delta^i_{nm}\{r^k_{mn},r^j_{nm}\} \tag*{(19)}

where the generalized derivative rnm;ijr^j_{nm;i} is expressed as

rnm;ij=∂rnmj∂ki−i[ξnni(k)−ξmmi(k)]rnmj(20)r^j_{nm;i}=\frac{\partial r^j_{nm}}{\partial k_i}-i[\xi^i_{nn}(\boldsymbol{k})-\xi^i_{mm}(\boldsymbol{k})]r^j_{nm} \tag*{(20)}

where ξmmi\xi^i_{mm} is the Berry connection for the mm-th band, given by

ξmmi=i⟨umk|∂∂ki|umk⟩.(21)\xi^i_{mm}=i\left\langle u_{mk}\middle|\frac{\partial}{\partial k_i}\middle|u_{mk}\right\rangle. \tag*{(21)}

Velocity representation and shift vector

To evaluate the conductivity numerically, we express the position matrix elements in terms of velocity operators:

rnmj={vnmjiωnm(n≠m)0(n=m),(22)r^j_{nm}= \begin{cases} \dfrac{v^j_{nm}}{i\omega_{nm}} & (n\ne m)\\ 0 & (n=m), \end{cases} \tag*{(22)}

where vnmj=⟨unk∣v^⋅ej∣umk⟩v^j_{nm}=\langle u_{nk}|\hat{v}\cdot\boldsymbol{e}_j|u_{mk}\rangle, Δmni=vmmi−vnni\Delta^i_{mn}=v^i_{mm}-v^i_{nn} and ωnm=(Enk−Emk)/ℏ\omega_{nm}=(E_{nk}-E_{mk})/\hbar. Here, we introduce the shift vector

Rnmij(k)=∂kiϕnmj+ξnni−ξmmi,(23)R^{ij}_{nm}(k)=\partial_{k_i}\phi^j_{nm}+\xi^i_{nn}-\xi^i_{mm}, \tag*{(23)}

which includes the Berry connection difference. The phase term ϕnmj\phi^j_{nm} corresponds to the phase of the group velocity matrix element as

vnmj=⟨unk∣v^⋅ej∣umk⟩=∣vnmj∣eiϕnmj.(24)v^j_{nm}=\langle u_{nk}|\hat{v}\cdot\boldsymbol{e}_j|u_{mk}\rangle=|v^j_{nm}|e^{i\phi^j_{nm}}. \tag*{(24)}

From Eqs. (B10) and (B13), we obtain

rnm;ij=−iRnmij(k)rnmj.(25)r^j_{nm;i}=-iR^{ij}_{nm}(k)r^j_{nm}. \tag*{(25)}

Substituting these expressions into the conductivity formula, Eq. (18), we obtain the shift current conductivity in terms of the velocity matrix elements and the shift vector:

σijkshift=−iℏe32S∑k∑n,mfnmEmn2(Emn−ℏω−iη)(vmnjvnmkRnmik+vmnkvnmjRnmij).(26)\sigma^{\mathrm{shift}}_{ijk}=-\frac{i\hbar e^3}{2S}\sum_k\sum_{n,m}\frac{f_{nm}}{E_{mn}^2(E_{mn}-\hbar\omega-i\eta)}\left(v^j_{mn}v^k_{nm}R^{ik}_{nm}+v^k_{mn}v^j_{nm}R^{ij}_{nm}\right). \tag*{(26)}

Here, we consider velocity representation of the shift vector Rnmij(k)R^{ij}_{nm}(k). The generalized derivative of the position operator rnmjr^j_{nm} can be expressed using the sum rule of differentiation, allowing the separation of the BPVE into shift and injection currents [32, 33] [2]. The generalized derivative rnm;ijr^j_{nm;i} is given by

rnm;ij=rnmiΔmnj+rnmjΔmniωnm+iωnm∑l(ωlmrnlirlmj−ωnlrnljrlmi).(27)r^j_{nm;i}=\frac{r^i_{nm}\Delta^j_{mn}+r^j_{nm}\Delta^i_{mn}}{\omega_{nm}}+\frac{i}{\omega_{nm}}\sum_l\left(\omega_{lm}r^i_{nl}r^j_{lm}-\omega_{nl}r^j_{nl}r^i_{lm}\right). \tag*{(27)}

Using Eqs. (27) and (20), we obtain

−iRnmij(k)rnmj=rnmiΔmnj+rnmjΔmniωnm+iωnm∑m(ωlmrnlirlmj−ωnlrnljrlmi).(28)-iR^{ij}_{nm}(k)r^j_{nm}=\frac{r^i_{nm}\Delta^j_{mn}+r^j_{nm}\Delta^i_{mn}}{\omega_{nm}}+\frac{i}{\omega_{nm}}\sum_m\left(\omega_{lm}r^i_{nl}r^j_{lm}-\omega_{nl}r^j_{nl}r^i_{lm}\right). \tag*{(28)}

From Eq. (22), the right-hand side of Eq. (28) can be rewritten as

vnmi(vmmj−vnnj)+vnmj(vmmi−vnni)iωnm2+iωnm∑l(vnlivlmjiωnliωlm−vnljvlmiiωnliωlm)=vnmi(vmmj−vnnj)+vnmj(vmmi−vnni)iωnm2+iωnm∑l(−vnlivlmjωnl+vnljvlmiωlm).(29)\begin{aligned} &\frac{v^i_{nm}(v^j_{mm}-v^j_{nn})+v^j_{nm}(v^i_{mm}-v^i_{nn})}{i\omega_{nm}^2} +\frac{i}{\omega_{nm}}\sum_l\left(\frac{v^i_{nl}v^j_{lm}}{i\omega_{nl}i\omega_{lm}}-\frac{v^j_{nl}v^i_{lm}}{i\omega_{nl}i\omega_{lm}}\right)\\ &=\frac{v^i_{nm}(v^j_{mm}-v^j_{nn})+v^j_{nm}(v^i_{mm}-v^i_{nn})}{i\omega_{nm}^2} +\frac{i}{\omega_{nm}}\sum_l\left(-\frac{v^i_{nl}v^j_{lm}}{\omega_{nl}}+\frac{v^j_{nl}v^i_{lm}}{\omega_{lm}}\right). \tag*{(29)} \end{aligned}

Thus, we obtain

Rnmij(k)=−1vnmj[vnmi(vmmj−vnnj)+vnmj(vmmi−vnni)iωnm+i∑l(−vnlivlmjωnl+vnljvlmiωlm)]=iℏvnmj[vnmi(vmmj−vnnj)+vnmj(vmmi−vnni)Enm+∑l(vnlivlmjEnl−vnljvlmiElm)].(30)\begin{aligned} R^{ij}_{nm}(k)&=-\frac{1}{v^j_{nm}}\left[\frac{v^i_{nm}(v^j_{mm}-v^j_{nn})+v^j_{nm}(v^i_{mm}-v^i_{nn})}{i\omega_{nm}}+i\sum_l\left(-\frac{v^i_{nl}v^j_{lm}}{\omega_{nl}}+\frac{v^j_{nl}v^i_{lm}}{\omega_{lm}}\right)\right]\\ &=\frac{i\hbar}{v^j_{nm}}\left[\frac{v^i_{nm}(v^j_{mm}-v^j_{nn})+v^j_{nm}(v^i_{mm}-v^i_{nn})}{E_{nm}}+\sum_l\left(\frac{v^i_{nl}v^j_{lm}}{E_{nl}}-\frac{v^j_{nl}v^i_{lm}}{E_{lm}}\right)\right]. \tag*{(30)} \end{aligned}

The shift current conductivity σijkshift\sigma^{\mathrm{shift}}_{ijk} is symmetric with respect to the exchange of jj and kk. For instance, σyxyshift=σyyxshift\sigma^{\mathrm{shift}}_{yxy}=\sigma^{\mathrm{shift}}_{yyx}. For linearly polarized light (j=kj=k), this simplifies to

σijjshift=−iℏe3S∑k∑n,mfnm∣vnmj∣2RnmijEmn2(Emn−ℏω−iη).(31)\sigma^{\mathrm{shift}}_{ijj}=-\frac{i\hbar e^3}{S}\sum_k\sum_{n,m}\frac{f_{nm}|v^j_{nm}|^2R^{ij}_{nm}}{E_{mn}^2(E_{mn}-\hbar\omega-i\eta)}. \tag*{(31)}

This expression clearly shows that the shift current is governed by the product of the transition intensity αmnj=∣vnmj∣2\alpha^j_{mn}=|v^j_{nm}|^2 and the shift vector Rnmij(k)R^{ij}_{nm}(k), which represents the real-space displacement of the electron wave packet during optical excitation. This geometric nature underlies the bulk photovoltaic effect [5].

Electronic Polarization and Berry Connection

The electronic polarization can be expressed in terms of the Berry connection as

Pi=e∫BZdk(2π)3∑mfmξmmi,(32)P_i=e\int_{\mathrm{BZ}}\frac{dk}{(2\pi)^3}\sum_m f_m\xi^i_{mm}, \tag*{(32)}

where the Berry connection represents the Wannier center of wavefunctions in real space. This means that the real-space electric polarization is determined by the momentum-space Berry connection. From this perspective, shift current originates from the difference in the charge center between the valence and conduction bands upon optical excitation. However, shift current does not generally appear in all systems: it vanishes in centrosymmetric systems. Even in noncentrosymmetric systems, the allowed tensor components of σijkshift(0;ω,−ω)\sigma^{\mathrm{shift}}_{ijk}(0;\omega,-\omega) are restricted by the crystal symmetry.

Contour plots of shift vector and transition intensity

By constructing the effective model, Here, we show contour plots of the shift vector Rnmij(k)R_{nm}^{ij}(\mathbf{k}) and the transition intensity αmnij=vmnivnmj\alpha_{mn}^{ij}=v_{mn}^{i}v_{nm}^{j}. This facilitates an intuitive understanding of the shift current conductivity σijkshift\sigma_{ijk}^{\mathrm{shift}}, analogous to the relationship between the Berry curvature and the transverse conductivity in linear optical responses.

Figure 9 and Figure 10 show contour plots of Rnmij(k)R_{nm}^{ij}(\mathbf{k}) and αmnjk(k)=vmnjvnmk\alpha_{mn}^{jk}(\mathbf{k})=v_{mn}^{j}v_{nm}^{k} for n=6n=6, m=7m=7 in the SR and LR models, respectively. In Eq. (6), the non-integral function is expressed as the product

Image not extracted

Figure 9. Contour plot of shift vector Rnmij(k)R_{nm}^{ij}(\boldsymbol{k}) and transition intensity αmnjk=vmnjvnmk\alpha_{mn}^{jk}=v_{mn}^{j}v_{nm}^{k} in the SR model.

Image not extracted

Figure 10. Contour plot of shift vector Rnmij(k)R_{nm}^{ij}(\boldsymbol{k}) and transition intensity αmnjk=vmnjvnmk\alpha_{mn}^{jk}=v_{mn}^{j}v_{nm}^{k} in the LR model.

αmnjk(k)Rnmik(k)+αmnkj(k)Rnmij(k).(33)\alpha_{mn}^{jk}(\mathbf{k})R_{nm}^{ik}(\mathbf{k})+\alpha_{mn}^{kj}(\mathbf{k})R_{nm}^{ij}(\mathbf{k}). \tag*{(33)}

This function determines whether σijkshift\sigma_{ijk}^{\mathrm{shift}} is finite. When it is an even function with respect to kx=0k_x=0, σijkshift\sigma_{ijk}^{\mathrm{shift}} is finite, whereas when it is an odd function, σijkshift\sigma_{ijk}^{\mathrm{shift}} vanishes.

For j=kj=k, the function simplifies to Rnmij(k)αmnjj(k)R_{nm}^{ij}(\mathbf{k})\alpha_{mn}^{jj}(\mathbf{k}). For example, in Figure 9, R67xx(k)R_{67}^{xx}(\mathbf{k}) and α76xx(k)\alpha_{76}^{xx}(\mathbf{k}) are both even functions, ensuring that σxxxshift\sigma_{xxx}^{\mathrm{shift}} is finite. Similarly, R67xy(k)R_{67}^{xy}(\mathbf{k}) and α76yy(k)\alpha_{76}^{yy}(\mathbf{k}) are both even functions, confirming that σxyyshift\sigma_{xyy}^{\mathrm{shift}} is finite, whereas for R67yy(k)α76yy(k)R_{67}^{yy}(\mathbf{k})\alpha_{76}^{yy}(\mathbf{k}), the product of an odd and even function is an odd function, leading to σyyyshift=0\sigma_{yyy}^{\mathrm{shift}}=0. For σyyxshift\sigma_{yyx}^{\mathrm{shift}}, we examine the function α76yx(k)R67xy(k)+α76yx(k)R67xy(k)\alpha_{76}^{yx}(\mathbf{k})R_{67}^{xy}(\mathbf{k})+\alpha_{76}^{yx}(\mathbf{k})R_{67}^{xy}(\mathbf{k}). Since both α76yx(k)\alpha_{76}^{yx}(\mathbf{k}) and R67xy(k)R_{67}^{xy}(\mathbf{k}) are odd functions, their product is even. Similarly, α76xy(k)\alpha_{76}^{xy}(\mathbf{k}) and R67yy(k)R_{67}^{yy}(\mathbf{k}) are even functions, making their product even. Since the sum of these two terms is nonzero, σyyxshift\sigma_{yyx}^{\mathrm{shift}} is finite. The same analysis can be applied to other conductivity components, yielding similar results for the LR model as shown in Figure 10.

References

  1. [25]N. Marzari and D. Vanderbilt, Maximally localized generalized wannier functions for composite energy bands, Phys. Rev. B 56, 12847 (1997).DOI
  2. [26]I. Souza, N. Marzari, and D. Vanderbilt, Maximally localized generalized wannier functions for entangled energy bands, Phys. Rev. B 65, 035109 (2001).DOI
  3. [27]N. Marzari, A. A. Mostofi, J. R. Yates, I. Souza, and D. Vanderbilt, Maximally localized wannier functions: Theory and applications, Rev. Mod. Phys. 84, 1419 (2012).DOI
  4. [28]A. A. Mostofi, J. R. Yates, Y.-S. Lee, I. Souza, D. Vanderbilt, and N. Marzari, wannier90: A tool for obtaining maximally-localised wannier functions, Comput. Phys. Commun. 178, 685 (2008).DOI
  5. [29]R. Kubo, Statistical-mechanical theory of irreversible processes. i. general theory and simple applications to magnetic and conduction problems, J. Phys. Soc. Jpn. 12, 570 (1957).DOI
  6. [30]D. Xiao, M.-C. Chang, and Q. Niu, Berry phase effects on electronic properties, Rev. Mod. Phys. 82, 1959 (2010).DOI
  7. [31]C. Aversa and J. E. Sipe, Nonlinear optical susceptibilities of semiconductors: Results with a length-gauge analysis, Phys. Rev. B 52, 14636 (1995).pubmed.ncbi.nlm.nih.gov/9980796
  8. [32]R. Habara and K. Wakabayashi, Symmetry manipulation of nonlinear optical effect for metallic transition-metal dichalcogenides, Phys. Rev. B 107, 115422 (2023).
  9. [33]H. Xu, H. Wang, J. Zhou, and J. Li, Pure spin photocurrent in non-centrosymmetric crystals: bulk spin photovoltaic effect, Nat. Commun. 12, 4330 (2021).

Paper details

vlnc:W_9m9vx869
Version
v1 · latest
Published
Fresh — added to the Hub within the last 30 days
Added
License
CC BY 4.0
Usage

views · 0

downloads · 0

A view counts once per browser per day, a download each time the PDF is requested.

  • Physics and Astronomy

Not recorded for this paper

View statement
Looking for related papers…
Contents